1
## libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
2
## Copyright 1996, 1997, 1998, 1999, 2000, 2001
3
## Free Software Foundation, Inc.
4
## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
6
## This program is free software; you can redistribute it and/or modify
7
## it under the terms of the GNU General Public License as published by
8
## the Free Software Foundation; either version 2 of the License, or
9
## (at your option) any later version.
11
## This program is distributed in the hope that it will be useful, but
12
## WITHOUT ANY WARRANTY; without even the implied warranty of
13
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14
## General Public License for more details.
16
## You should have received a copy of the GNU General Public License
17
## along with this program; if not, write to the Free Software
18
## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
20
## As a special exception to the GNU General Public License, if you
21
## distribute this file as part of a program that contains a
22
## configuration script generated by Autoconf, you may include it under
23
## the same distribution terms that you use for the rest of that program.
25
# serial 46 AC_PROG_LIBTOOL
26
AC_DEFUN([AC_PROG_LIBTOOL],
27
[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
28
dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
29
dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
30
AC_PROVIDE_IFELSE([AC_PROG_CXX],
32
[define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
35
dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
36
dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
37
dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
38
AC_PROVIDE_IFELSE([AC_PROG_GCJ],
40
[AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
42
[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
45
[define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
47
ifdef([A][M_PROG_GCJ],
48
[define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
50
ifdef([LT_AC_PROG_GCJ],
51
[define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
54
AC_DEFUN([_AC_PROG_LIBTOOL],
55
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
56
AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
57
AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
59
# Save cache, so that ltconfig can load it
62
# Actually configure libtool. ac_aux_dir is where install-sh is found.
63
AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
64
MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
65
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
66
AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
67
objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
68
deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
69
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
70
$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
71
|| AC_MSG_ERROR([libtool configure failed])
73
# Reload cache, that may have been modified by ltconfig
76
# This can be used to rebuild libtool when needed
77
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
79
# Always use our own libtool.
80
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
83
# Redirect the config.log output again, so that the ltconfig log is not
84
# clobbered by the next message.
88
AC_DEFUN([AC_LIBTOOL_SETUP],
90
AC_REQUIRE([AC_ENABLE_SHARED])dnl
91
AC_REQUIRE([AC_ENABLE_STATIC])dnl
92
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
93
AC_REQUIRE([AC_CANONICAL_HOST])dnl
94
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
95
AC_REQUIRE([AC_PROG_CC])dnl
96
AC_REQUIRE([AC_PROG_LD])dnl
97
AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
98
AC_REQUIRE([AC_PROG_NM])dnl
99
AC_REQUIRE([AC_PROG_LN_S])dnl
100
AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
101
# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
102
AC_REQUIRE([AC_OBJEXT])dnl
103
AC_REQUIRE([AC_EXEEXT])dnl
106
# Only perform the check for file, if the check method requires it
107
case $deplibs_check_method in
109
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
115
AC_CHECK_TOOL(RANLIB, ranlib, :)
116
AC_CHECK_TOOL(STRIP, strip, :)
118
# Check for any special flags to pass to ltconfig.
119
libtool_flags="--cache-file=$cache_file"
120
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
121
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
122
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
123
test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
124
test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
125
ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
126
[libtool_flags="$libtool_flags --enable-dlopen"])
127
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
128
[libtool_flags="$libtool_flags --enable-win32-dll"])
129
AC_ARG_ENABLE(libtool-lock,
130
[ --disable-libtool-lock avoid locking (might break parallel builds)])
131
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
132
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
135
[ --with-pic try to use only PIC/non-PIC objects [default=use both]],
136
pic_mode="$withval", pic_mode=default)
137
test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
138
test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
140
# Some flags need to be propagated to the compiler or linker for good
144
# Find out which ABI we are using.
145
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
146
if AC_TRY_EVAL(ac_compile); then
147
case `/usr/bin/file conftest.$ac_objext` in
163
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
164
SAVE_CFLAGS="$CFLAGS"
165
CFLAGS="$CFLAGS -belf"
166
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
169
AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
171
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
172
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
173
CFLAGS="$SAVE_CFLAGS"
177
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
178
[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
179
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
180
AC_CHECK_TOOL(AS, as, false)
181
AC_CHECK_TOOL(OBJDUMP, objdump, false)
183
# recent cygwin and mingw systems supply a stub DllMain which the user
184
# can override, but on older systems we have to supply one
185
AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
187
[extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
189
[lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
192
*-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
193
# old mingw systems require "-dll" to link a DLL, while more recent ones
195
SAVE_CFLAGS="$CFLAGS"
196
CFLAGS="$CFLAGS -mdll"
197
AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
198
[AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
199
CFLAGS="$SAVE_CFLAGS" ;;
200
*-*-cygwin* | *-*-pw32*)
201
# cygwin systems need to pass --dll to the linker, and not link
202
# crt.o which will require a WinMain@16 definition.
203
lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
210
# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
211
AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
213
# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
214
AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
216
# AC_ENABLE_SHARED - implement the --enable-shared flag
217
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
218
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
220
AC_DEFUN([AC_ENABLE_SHARED],
221
[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
222
AC_ARG_ENABLE(shared,
223
changequote(<<, >>)dnl
224
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
226
[p=${PACKAGE-default}
228
yes) enable_shared=yes ;;
229
no) enable_shared=no ;;
232
# Look at the argument we got. We use all the common list separators.
233
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
234
for pkg in $enableval; do
235
if test "X$pkg" = "X$p"; then
242
enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
245
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
246
AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
247
AC_ENABLE_SHARED(no)])
249
# AC_ENABLE_STATIC - implement the --enable-static flag
250
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
251
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
253
AC_DEFUN([AC_ENABLE_STATIC],
254
[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
255
AC_ARG_ENABLE(static,
256
changequote(<<, >>)dnl
257
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
259
[p=${PACKAGE-default}
261
yes) enable_static=yes ;;
262
no) enable_static=no ;;
265
# Look at the argument we got. We use all the common list separators.
266
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
267
for pkg in $enableval; do
268
if test "X$pkg" = "X$p"; then
275
enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
278
# AC_DISABLE_STATIC - set the default static flag to --disable-static
279
AC_DEFUN([AC_DISABLE_STATIC],
280
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
281
AC_ENABLE_STATIC(no)])
284
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
285
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
286
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
288
AC_DEFUN([AC_ENABLE_FAST_INSTALL],
289
[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
290
AC_ARG_ENABLE(fast-install,
291
changequote(<<, >>)dnl
292
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
294
[p=${PACKAGE-default}
296
yes) enable_fast_install=yes ;;
297
no) enable_fast_install=no ;;
299
enable_fast_install=no
300
# Look at the argument we got. We use all the common list separators.
301
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
302
for pkg in $enableval; do
303
if test "X$pkg" = "X$p"; then
304
enable_fast_install=yes
310
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
313
# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
314
AC_DEFUN([AC_DISABLE_FAST_INSTALL],
315
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
316
AC_ENABLE_FAST_INSTALL(no)])
318
# AC_LIBTOOL_PICMODE - implement the --with-pic flag
319
# Usage: AC_LIBTOOL_PICMODE[(MODE)]
320
# Where MODE is either `yes' or `no'. If omitted, it defaults to
322
AC_DEFUN([AC_LIBTOOL_PICMODE],
323
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
324
pic_mode=ifelse($#,1,$1,default)])
327
# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
328
AC_DEFUN([AC_PATH_TOOL_PREFIX],
329
[AC_MSG_CHECKING([for $1])
330
AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
333
lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
336
lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
339
ac_save_MAGIC_CMD="$MAGIC_CMD"
340
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
341
dnl $ac_dummy forces splitting on constant user-supplied paths.
342
dnl POSIX.2 word splitting is done only on the output of word expansions,
343
dnl not every word. This closes a longstanding sh security hole.
344
ac_dummy="ifelse([$2], , $PATH, [$2])"
345
for ac_dir in $ac_dummy; do
346
test -z "$ac_dir" && ac_dir=.
347
if test -f $ac_dir/$1; then
348
lt_cv_path_MAGIC_CMD="$ac_dir/$1"
349
if test -n "$file_magic_test_file"; then
350
case $deplibs_check_method in
352
file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
353
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
354
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
355
egrep "$file_magic_regex" > /dev/null; then
360
*** Warning: the command libtool uses to detect shared libraries,
361
*** $file_magic_cmd, produces output that libtool cannot recognize.
362
*** The result is that libtool may fail to recognize shared libraries
363
*** as such. This will affect the creation of libtool libraries that
364
*** depend on shared libraries, but programs linked with such libtool
365
*** libraries will work regardless of this problem. Nevertheless, you
366
*** may want to report the problem to your system manager and/or to
367
*** bug-libtool@gnu.org
377
MAGIC_CMD="$ac_save_MAGIC_CMD"
380
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
381
if test -n "$MAGIC_CMD"; then
382
AC_MSG_RESULT($MAGIC_CMD)
389
# AC_PATH_MAGIC - find a file program which can recognise a shared library
390
AC_DEFUN([AC_PATH_MAGIC],
391
[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
392
AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
393
if test -z "$lt_cv_path_MAGIC_CMD"; then
394
if test -n "$ac_tool_prefix"; then
395
AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
403
# AC_PROG_LD - find the path to the GNU or non-GNU linker
404
AC_DEFUN([AC_PROG_LD],
406
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
407
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
408
AC_REQUIRE([AC_PROG_CC])dnl
409
AC_REQUIRE([AC_CANONICAL_HOST])dnl
410
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
412
if test "$GCC" = yes; then
413
# Check if gcc -print-prog-name=ld gives a path.
414
AC_MSG_CHECKING([for ld used by GCC])
417
# gcc leaves a trailing carriage return which upsets mingw
418
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
420
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
423
# Accept absolute paths.
424
[[\\/]* | [A-Za-z]:[\\/]*)]
425
re_direlt=['/[^/][^/]*/\.\./']
426
# Canonicalize the path of ld
427
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
428
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
429
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
431
test -z "$LD" && LD="$ac_prog"
434
# If it fails, then pretend we aren't using GCC.
438
# If it is relative, then search for the first ld in PATH.
442
elif test "$with_gnu_ld" = yes; then
443
AC_MSG_CHECKING([for GNU ld])
445
AC_MSG_CHECKING([for non-GNU ld])
447
AC_CACHE_VAL(lt_cv_path_LD,
448
[if test -z "$LD"; then
449
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
450
for ac_dir in $PATH; do
451
test -z "$ac_dir" && ac_dir=.
452
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
453
lt_cv_path_LD="$ac_dir/$ac_prog"
454
# Check to see if the program is GNU ld. I'd rather use --version,
455
# but apparently some GNU ld's only accept -v.
456
# Break only if it was the GNU/non-GNU ld that we prefer.
457
if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
458
test "$with_gnu_ld" != no && break
460
test "$with_gnu_ld" != yes && break
466
lt_cv_path_LD="$LD" # Let the user override the test with a path.
469
if test -n "$LD"; then
474
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
478
AC_DEFUN([AC_PROG_LD_GNU],
479
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
480
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
481
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
482
lt_cv_prog_gnu_ld=yes
486
with_gnu_ld=$lt_cv_prog_gnu_ld
489
# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
490
# -- PORTME Some linkers may need a different reload flag.
491
AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
492
[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
493
[lt_cv_ld_reload_flag='-r'])
494
reload_flag=$lt_cv_ld_reload_flag
495
test -n "$reload_flag" && reload_flag=" $reload_flag"
498
# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
499
# -- PORTME fill in with the dynamic library characteristics
500
AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
501
[AC_CACHE_CHECK([how to recognise dependant libraries],
502
lt_cv_deplibs_check_method,
503
[lt_cv_file_magic_cmd='$MAGIC_CMD'
504
lt_cv_file_magic_test_file=
505
lt_cv_deplibs_check_method='unknown'
506
# Need to set the preceding variable on all platforms that support
507
# interlibrary dependencies.
508
# 'none' -- dependencies not supported.
509
# `unknown' -- same as none, but documents that we really don't know.
510
# 'pass_all' -- all dependencies passed with no checks.
511
# 'test_compile' -- check by making test program.
512
# 'file_magic [regex]' -- check by looking for files in library path
513
# which responds to the $file_magic_cmd with a given egrep regex.
514
# If you have `file' or equivalent on your system and you're not sure
515
# whether `pass_all' will *always* work, you probably want this one.
519
lt_cv_deplibs_check_method=pass_all
523
lt_cv_deplibs_check_method=pass_all
527
lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
528
lt_cv_file_magic_cmd='/usr/bin/file -L'
529
lt_cv_file_magic_test_file=/shlib/libc.so
532
cygwin* | mingw* |pw32*)
533
lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
534
lt_cv_file_magic_cmd='$OBJDUMP -f'
538
lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
539
lt_cv_file_magic_cmd='/usr/bin/file -L'
541
rhapsody* | darwin1.[012])
542
lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
545
lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
551
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
554
# Not sure whether the presence of OpenBSD here was a mistake.
555
# Let's accept both of them until this is cleared up.
556
lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
557
lt_cv_file_magic_cmd=/usr/bin/file
558
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
562
lt_cv_deplibs_check_method=pass_all
567
lt_cv_deplibs_check_method=pass_all
571
lt_cv_deplibs_check_method=['file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
572
lt_cv_file_magic_cmd=/usr/bin/file
573
lt_cv_file_magic_test_file=/usr/lib/libc.sl
579
# this will be overridden with pass_all, but let us keep it just in case
580
lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
584
*-32|*"-32 ") libmagic=32-bit;;
585
*-n32|*"-n32 ") libmagic=N32;;
586
*-64|*"-64 ") libmagic=64-bit;;
587
*) libmagic=never-match;;
589
# this will be overridden with pass_all, but let us keep it just in case
590
lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
593
lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
594
lt_cv_deplibs_check_method=pass_all
597
# This must be Linux ELF.
600
alpha* | i*86 | powerpc* | sparc* | ia64* | s390* | m68k* | arm* | mips* | hppa* | sh* )
601
lt_cv_deplibs_check_method=pass_all ;;
603
# glibc up to 2.1.1 does not perform some relocations on ARM
604
lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
606
lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
610
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
611
[lt_cv_deplibs_check_method='file_magic NetBSD/[a-z0-9]* demand paged shared library']
613
[lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object']
615
lt_cv_file_magic_cmd='/usr/bin/file -L'
616
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
620
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
624
lt_cv_deplibs_check_method='file_magic OpenBSD/i[3-9]86 demand paged shared library'
626
lt_cv_file_magic_cmd=/usr/bin/file
627
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
631
lt_cv_deplibs_check_method=pass_all
636
[lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
637
lt_cv_file_magic_cmd=/usr/bin/file
638
lt_cv_file_magic_test_file=/usr/lib/libnls.so
641
osf3* | osf4* | osf5*)
642
# this will be overridden with pass_all, but let us keep it just in case
643
lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
644
lt_cv_file_magic_test_file=/shlib/libc.so
645
lt_cv_deplibs_check_method=pass_all
649
lt_cv_deplibs_check_method=pass_all
653
lt_cv_deplibs_check_method=pass_all
654
lt_cv_file_magic_test_file=/lib/libc.so
657
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
660
lt_cv_deplibs_check_method=pass_all
663
lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
664
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
670
file_magic_cmd=$lt_cv_file_magic_cmd
671
deplibs_check_method=$lt_cv_deplibs_check_method
675
# AC_PROG_NM - find the path to a BSD-compatible name lister
676
AC_DEFUN([AC_PROG_NM],
677
[AC_MSG_CHECKING([for BSD-compatible nm])
678
AC_CACHE_VAL(lt_cv_path_NM,
679
[if test -n "$NM"; then
680
# Let the user override the test.
683
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
684
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
685
test -z "$ac_dir" && ac_dir=.
686
tmp_nm=$ac_dir/${ac_tool_prefix}nm
687
if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
688
# Check to see if the nm accepts a BSD-compat flag.
689
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
690
# nm: unknown option "B" ignored
691
# Tru64's nm complains that /dev/null is an invalid object file
692
if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
693
lt_cv_path_NM="$tmp_nm -B"
695
elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
696
lt_cv_path_NM="$tmp_nm -p"
699
lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
700
continue # so that we can try to find one that supports BSD flags
705
test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
711
# AC_CHECK_LIBM - check for math library
712
AC_DEFUN([AC_CHECK_LIBM],
713
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
716
*-*-beos* | *-*-cygwin* | *-*-pw32*)
717
# These system don't have libm
720
AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
721
AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
724
AC_CHECK_LIB(m, main, LIBM="-lm")
729
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
730
# the libltdl convenience library and INCLTDL to the include flags for
731
# the libltdl header and adds --enable-ltdl-convenience to the
732
# configure arguments. Note that LIBLTDL and INCLTDL are not
733
# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
734
# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
735
# with '${top_builddir}/' and INCLTDL will be prefixed with
736
# '${top_srcdir}/' (note the single quotes!). If your package is not
737
# flat and you're not using automake, define top_builddir and
738
# top_srcdir appropriately in the Makefiles.
739
AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
740
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
741
case $enable_ltdl_convenience in
742
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
743
"") enable_ltdl_convenience=yes
744
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
746
LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
747
INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
750
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
751
# the libltdl installable library and INCLTDL to the include flags for
752
# the libltdl header and adds --enable-ltdl-install to the configure
753
# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
754
# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
755
# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
756
# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
757
# with '${top_srcdir}/' (note the single quotes!). If your package is
758
# not flat and you're not using automake, define top_builddir and
759
# top_srcdir appropriately in the Makefiles.
760
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
761
AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
762
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
763
AC_CHECK_LIB(ltdl, main,
764
[test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
765
[if test x"$enable_ltdl_install" = xno; then
766
AC_MSG_WARN([libltdl not installed, but installation disabled])
768
enable_ltdl_install=yes
771
if test x"$enable_ltdl_install" = x"yes"; then
772
ac_configure_args="$ac_configure_args --enable-ltdl-install"
773
LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
774
INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
776
ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
782
# If this macro is not defined by Autoconf, define it here.
783
ifdef([AC_PROVIDE_IFELSE],
785
[define([AC_PROVIDE_IFELSE],
786
[ifdef([AC_PROVIDE_$1],
789
# AC_LIBTOOL_CXX - enable support for C++ libraries
790
AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
792
AC_DEFUN([_AC_LIBTOOL_CXX],
793
[AC_REQUIRE([AC_PROG_CXX])
794
AC_REQUIRE([AC_PROG_CXXCPP])
795
LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
797
lt_save_CFLAGS="$CFLAGS"
798
dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
799
dnl is set to the C++ compiler.
800
AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
801
MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
802
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
803
AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
804
objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
805
deplibs_check_method="$deplibs_check_method" \
806
file_magic_cmd="$file_magic_cmd" \
807
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
808
--build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
809
|| AC_MSG_ERROR([libtool tag configuration failed])
811
CFLAGS="$lt_save_CFLAGS"
813
# Redirect the config.log output again, so that the ltconfig log is not
814
# clobbered by the next message.
818
# AC_LIBTOOL_GCJ - enable support for GCJ libraries
819
AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
821
AC_DEFUN([_AC_LIBTOOL_GCJ],
822
[AC_REQUIRE([AC_PROG_LIBTOOL])
823
AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
824
[AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
825
[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
826
[ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
827
[ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
828
[AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
829
LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
831
lt_save_CFLAGS="$CFLAGS"
832
dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
833
dnl is set to the C++ compiler.
834
AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
835
MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
836
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
837
AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
838
objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
839
deplibs_check_method="$deplibs_check_method" \
840
file_magic_cmd="$file_magic_cmd" \
841
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
842
--build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
843
|| AC_MSG_ERROR([libtool tag configuration failed])
845
CFLAGS="$lt_save_CFLAGS"
847
# Redirect the config.log output again, so that the ltconfig log is not
848
# clobbered by the next message.
853
AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
854
AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
855
AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
856
AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
857
AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
858
AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
859
AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
861
dnl This is just to silence aclocal about the macro not being used
862
ifelse([AC_DISABLE_FAST_INSTALL])dnl
864
AC_DEFUN([LT_AC_PROG_GCJ],
865
[AC_CHECK_TOOL(GCJ, gcj, no)
866
test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
added
removed
admin/new-libtool.m4.in
