4
#------------------------------------------------------------------------------
5
# All PostgreSQL makefiles include this file and use the variables it sets,
6
# which in turn are put here by the configure script. There is no need for
7
# users to edit this file -- if it turns out to be necessary then that's a
10
# A makefile that includes this file needs to set the variable `subdir' to
11
# the relative path from the top to itself and `top_builddir' to the relative
12
# path from itself to the top before including this file. (The "top" is the
13
# parent directory of the directory this file is in.)
14
#------------------------------------------------------------------------------
17
##########################################################################
21
.PHONY: all install install-strip installdirs uninstall clean distclean maintainer-clean distprep check installcheck maintainer-check coverage
24
# make `all' the default target
27
# Delete target files if the command fails after it has
28
# started to update the file.
31
# PostgreSQL version number
32
VERSION = @PACKAGE_VERSION@
33
MAJORVERSION = @PG_MAJORVERSION@
35
# Support for VPATH builds
36
vpath_build = @vpath_build@
37
abs_top_srcdir = @abs_top_srcdir@
39
ifneq ($(vpath_build),yes)
40
top_srcdir = $(top_builddir)
42
else # vpath_build = yes
43
top_srcdir = $(abs_top_srcdir)
44
srcdir = $(top_srcdir)/$(subdir)
48
# Saved arguments from configure
49
configure_args = @configure_args@
52
##########################################################################
54
# Installation directories
56
# These are set by the equivalent --xxxdir configure options. We
57
# append "postgresql" to some of them, if the string does not already
58
# contain "pgsql" or "postgres", in order to avoid directory clutter.
60
# In a PGXS build, we cannot use the values inserted into Makefile.global
61
# by configure, since the installation tree may have been relocated.
62
# Instead get the path values from pg_config.
66
# Note that prefix, exec_prefix, and datarootdir aren't defined in a PGXS build;
67
# makefiles may only use the derived variables such as bindir.
70
exec_prefix := @exec_prefix@
71
datarootdir := @datarootdir@
76
ifeq "$(findstring pgsql, $(datadir))" ""
77
ifeq "$(findstring postgres, $(datadir))" ""
78
override datadir := $(datadir)/postgresql
82
sysconfdir := @sysconfdir@
83
ifeq "$(findstring pgsql, $(sysconfdir))" ""
84
ifeq "$(findstring postgres, $(sysconfdir))" ""
85
override sysconfdir := $(sysconfdir)/postgresql
92
ifeq "$(findstring pgsql, $(pkglibdir))" ""
93
ifeq "$(findstring postgres, $(pkglibdir))" ""
94
override pkglibdir := $(pkglibdir)/postgresql
98
includedir := @includedir@
100
pkgincludedir = $(includedir)
101
ifeq "$(findstring pgsql, $(pkgincludedir))" ""
102
ifeq "$(findstring postgres, $(pkgincludedir))" ""
103
override pkgincludedir := $(pkgincludedir)/postgresql
110
ifeq "$(findstring pgsql, $(docdir))" ""
111
ifeq "$(findstring postgres, $(docdir))" ""
112
override docdir := $(docdir)/postgresql
118
localedir := @localedir@
122
# Extension makefiles should set PG_CONFIG, but older ones might not
124
PG_CONFIG = pg_config
127
bindir := $(shell $(PG_CONFIG) --bindir)
128
datadir := $(shell $(PG_CONFIG) --sharedir)
129
sysconfdir := $(shell $(PG_CONFIG) --sysconfdir)
130
libdir := $(shell $(PG_CONFIG) --libdir)
131
pkglibdir := $(shell $(PG_CONFIG) --pkglibdir)
132
includedir := $(shell $(PG_CONFIG) --includedir)
133
pkgincludedir := $(shell $(PG_CONFIG) --pkgincludedir)
134
mandir := $(shell $(PG_CONFIG) --mandir)
135
docdir := $(shell $(PG_CONFIG) --docdir)
136
localedir := $(shell $(PG_CONFIG) --localedir)
140
# These derived path variables aren't separately configurable.
142
includedir_server = $(pkgincludedir)/server
143
includedir_internal = $(pkgincludedir)/internal
144
pgxsdir = $(pkglibdir)/pgxs
147
##########################################################################
151
# Records the choice of the various --enable-xxx and --with-xxx options.
153
with_perl = @with_perl@
154
with_python = @with_python@
155
with_tcl = @with_tcl@
156
with_openssl = @with_openssl@
157
with_ossp_uuid = @with_ossp_uuid@
158
with_libxml = @with_libxml@
159
with_libxslt = @with_libxslt@
160
with_system_tzdata = @with_system_tzdata@
161
with_zlib = @with_zlib@
162
enable_shared = @enable_shared@
163
enable_rpath = @enable_rpath@
164
enable_nls = @enable_nls@
165
enable_debug = @enable_debug@
166
enable_dtrace = @enable_dtrace@
167
enable_coverage = @enable_coverage@
168
enable_thread_safety = @enable_thread_safety@
170
python_includespec = @python_includespec@
171
python_libdir = @python_libdir@
172
python_libspec = @python_libspec@
173
python_additional_libs = @python_additional_libs@
174
python_configdir = @python_configdir@
175
python_version = @python_version@
177
krb_srvtab = @krb_srvtab@
180
TCL_LIB_FILE = @TCL_LIB_FILE@
181
TCL_LIBS = @TCL_LIBS@
182
TCL_LIB_SPEC = @TCL_LIB_SPEC@
183
TCL_INCLUDE_SPEC = @TCL_INCLUDE_SPEC@
184
TCL_SHARED_BUILD = @TCL_SHARED_BUILD@
185
TCL_SHLIB_LD_LIBS = @TCL_SHLIB_LD_LIBS@
187
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
188
PTHREAD_LIBS = @PTHREAD_LIBS@
190
have_docbook = @have_docbook@
191
DOCBOOKSTYLE = @DOCBOOKSTYLE@
192
COLLATEINDEX = @COLLATEINDEX@
193
DOCBOOK2MAN = @DOCBOOK2MAN@
196
##########################################################################
203
CPPFLAGS = @CPPFLAGS@
206
override CPPFLAGS := -I$(includedir_server) -I$(includedir_internal) $(CPPFLAGS)
208
override CPPFLAGS := -I$(top_srcdir)/src/include $(CPPFLAGS)
210
override CPPFLAGS := -I$(top_builddir)/src/include $(CPPFLAGS)
216
SUN_STUDIO_CC = @SUN_STUDIO_CC@
222
BISONFLAGS = @BISONFLAGS@ $(YFLAGS)
224
FLEXFLAGS = @FLEXFLAGS@ $(LFLAGS)
226
DTRACEFLAGS = @DTRACEFLAGS@
235
LDAP_LIBS_FE = @LDAP_LIBS_FE@
236
LDAP_LIBS_BE = @LDAP_LIBS_BE@
237
OSSP_UUID_LIBS = @OSSP_UUID_LIBS@
239
with_gnu_ld = @with_gnu_ld@
240
ld_R_works = @ld_R_works@
242
LDFLAGS_SL = @LDFLAGS_SL@
251
# quoted for pathname with spaces
253
perl_archlibexp = @perl_archlibexp@
254
perl_privlibexp = @perl_privlibexp@
255
perl_useshrplib = @perl_useshrplib@
256
perl_embed_ldflags = @perl_embed_ldflags@
263
MSGMERGE = @MSGMERGE@
266
XGETTEXT = @XGETTEXT@
271
PL_TESTDB = pl_regression
272
CONTRIB_TESTDB = contrib_regression
276
INSTALL = $(SHELL) $(top_srcdir)/config/install-sh -c
278
INSTALL_SCRIPT_MODE = 755
279
INSTALL_DATA_MODE = 644
280
INSTALL_PROGRAM = $(INSTALL_PROGRAM_ENV) $(INSTALL) $(INSTALL_STRIP_FLAG)
281
INSTALL_SCRIPT = $(INSTALL) -m $(INSTALL_SCRIPT_MODE)
282
INSTALL_DATA = $(INSTALL) -m $(INSTALL_DATA_MODE)
283
INSTALL_STLIB = $(INSTALL_STLIB_ENV) $(INSTALL_DATA) $(INSTALL_STRIP_FLAG)
284
INSTALL_SHLIB = $(INSTALL_SHLIB_ENV) $(INSTALL) $(INSTALL_SHLIB_OPTS) $(INSTALL_STRIP_FLAG)
285
# Override in Makefile.port if necessary
286
INSTALL_SHLIB_OPTS = -m 755
288
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
289
missing = $(SHELL) $(top_srcdir)/config/missing
292
STRIP_STATIC_LIB = @STRIP_STATIC_LIB@
293
STRIP_SHARED_LIB = @STRIP_SHARED_LIB@
307
ifeq ($(enable_coverage),yes)
308
# ccache loses .gcno files
309
export CCACHE_DISABLE = 1
314
DEF_PGPORT = @default_port@
315
WANTED_LANGUAGES = @WANTED_LANGUAGES@
318
##########################################################################
320
# Additional platform-specific settings
323
# Name of the "template"
326
build_os = @build_os@
330
host_cpu = @host_cpu@
332
# Make HAVE_IPV6 available for initdb script creation
333
HAVE_IPV6= @HAVE_IPV6@
335
# The HP-UX port makefile, for one, needs access to this symbol
336
HAVE_POSIX_SIGNALS= @HAVE_POSIX_SIGNALS@
338
# This is mainly for use on FreeBSD, where we have both a.out and elf
339
# systems now. May be applicable to other systems to?
340
ELF_SYSTEM= @ELF_SYS@
342
# Backend stack size limit has to be hard-wired on Windows (it's in bytes)
343
WIN32_STACK_RLIMIT=4194304
345
# Pull in platform-specific magic
346
include $(top_builddir)/src/Makefile.port
348
# Set up rpath if enabled. By default it will point to our libdir,
349
# but individual Makefiles can force other rpath paths if needed.
352
ifeq ($(enable_rpath), yes)
357
##########################################################################
359
# Some variables needed to find some client interfaces
362
# some contribs assumes headers and libs are in the source tree...
363
libpq_srcdir = $(includedir)
364
libpq_builddir = $(libdir)
366
libpq_srcdir = $(top_srcdir)/src/interfaces/libpq
367
libpq_builddir = $(top_builddir)/src/interfaces/libpq
370
# This macro is for use by libraries linking to libpq. (Because libpgport
371
# isn't created with the same link flags as libpq, it can't be used.)
372
libpq = -L$(libpq_builddir) -lpq
374
# If doing static linking, shared library dependency info isn't available,
375
# so add in the libraries that libpq depends on.
376
ifeq ($(enable_shared), no)
377
libpq += $(filter -lintl -lssl -lcrypto -lkrb5 -lcrypt, $(LIBS)) \
378
$(LDAP_LIBS_FE) $(PTHREAD_LIBS)
381
# This macro is for use by client executables (not libraries) that use libpq.
382
# We force clients to pull symbols from the non-shared library libpgport
383
# rather than pulling some libpgport symbols from libpq just because
384
# libpq uses those functions too. This makes applications less
385
# dependent on changes in libpq's usage of pgport. To do this we link to
386
# pgport before libpq. This does cause duplicate -lpgport's to appear
387
# on client link lines.
389
libpq_pgport = -L$(libdir) -lpgport $(libpq)
391
libpq_pgport = -L$(top_builddir)/src/port -lpgport $(libpq)
396
$(MAKE) -C $(libpq_builddir) all
399
$(MAKE) -C $(top_builddir)/src/port all
401
.PHONY: submake-libpq submake-libpgport
404
##########################################################################
408
# This includes your local customizations if Makefile.custom exists
409
# in the source directory. This file doesn't exist in the original
410
# distribution so that it doesn't get overwritten when you upgrade.
412
# NOTE: Makefile.custom is from the pre-Autoconf days of PostgreSQL.
413
# You are liable to shoot yourself in the foot if you use it without
414
# knowing exactly what you're doing. The preferred (and more
415
# reliable) method is to communicate what you want to do to the
416
# configure script, and leave the makefiles alone.
418
-include $(top_srcdir)/src/Makefile.custom
420
ifneq ($(CUSTOM_INSTALL),)
421
INSTALL= $(CUSTOM_INSTALL)
424
ifneq ($(CUSTOM_CC),)
428
ifneq ($(CUSTOM_COPT),)
439
LDFLAGS += $(PROFILE)
443
##########################################################################
445
# substitute implementations of C library routines (see src/port/)
449
LIBS := -lpgport $(LIBS)
450
# add location of libpgport.a to LDFLAGS
452
override LDFLAGS := -L$(libdir) $(LDFLAGS)
454
override LDFLAGS := -L$(top_builddir)/src/port $(LDFLAGS)
457
# to make ws2_32.lib the last library, and always link with shfolder,
458
# so SHGetFolderName isn't picked up from shell32.dll
459
ifeq ($(PORTNAME),win32)
460
LIBS += -lws2_32 -lshfolder
463
# Not really standard libc functions, used by the backend.
467
##########################################################################
469
# Global targets and rules
472
$(CPP) $(CPPFLAGS) -o $@ $<
482
# Remake Makefile.global from Makefile.global.in if the latter
483
# changed. In order to trigger this rule, the including file must
484
# write `include $(top_builddir)/src/Makefile.global', not some
486
$(top_builddir)/src/Makefile.global: $(top_srcdir)/src/Makefile.global.in $(top_builddir)/config.status
487
cd $(top_builddir) && ./config.status src/Makefile.global
489
# Remake pg_config.h from pg_config.h.in if the latter changed.
490
# config.status will not change the timestamp on pg_config.h if it
491
# doesn't change, so as to avoid recompiling the entire tree
492
# unnecessarily. Therefore we make config.status update a timestamp file
493
# stamp-h everytime it runs, so that we don't trigger this rule everytime.
494
# (We do trigger the null rule for stamp-h to pg_config.h everytime; so it's
495
# important for that rule to be null!)
497
# Of course you need to turn on dependency tracking to get any
498
# dependencies on pg_config.h.
499
$(top_builddir)/src/include/pg_config.h: $(top_builddir)/src/include/stamp-h
501
$(top_builddir)/src/include/stamp-h: $(top_srcdir)/src/include/pg_config.h.in $(top_builddir)/config.status
502
cd $(top_builddir) && ./config.status src/include/pg_config.h
504
# Also remake ecpg_config.h from ecpg_config.h.in if the latter changed, same
506
$(top_builddir)/src/interfaces/ecpg/include/ecpg_config.h: $(top_builddir)/src/interfaces/ecpg/include/stamp-h
508
$(top_builddir)/src/interfaces/ecpg/include/stamp-h: $(top_builddir)/src/interfaces/ecpg/include/ecpg_config.h.in $(top_builddir)/config.status
509
cd $(top_builddir) && ./config.status src/interfaces/ecpg/include/ecpg_config.h
511
# When configure changes, rerun configure with the same options as
512
# last time. To change configure, you need to run autoconf manually.
513
$(top_builddir)/config.status: $(top_srcdir)/configure
514
cd $(top_builddir) && ./config.status --recheck
520
@$(MAKE) INSTALL_PROGRAM_ENV="STRIPPROG='$(STRIP)'" \
521
INSTALL_STLIB_ENV="STRIPPROG='$(STRIP_STATIC_LIB)'" \
522
INSTALL_SHLIB_ENV="STRIPPROG='$(STRIP_SHARED_LIB)'" \
523
INSTALL_STRIP_FLAG=-s \
527
##########################################################################
529
# Automatic dependency generation
530
# -------------------------------
531
# When we configure with --enable-depend then we override the default
532
# compilation rule with the magic below. While or after creating the
533
# actual output file we also create a dependency list for the .c file.
534
# Next time we invoke make we will have top-notch information about
535
# whether this file needs to be updated. The dependency files are kept
536
# in the .deps subdirectory of each directory.
538
autodepend = @autodepend@
540
ifeq ($(autodepend), yes)
543
COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
550
# GCC allows us to create object and dependency file in one invocation.
552
@if test ! -d $(DEPDIR); then mkdir -p $(DEPDIR); fi
553
$(COMPILE.c) -o $@ $< -MMD -MP -MF $(DEPDIR)/$(*F).Po
557
# Include all the dependency files generated for the current
558
# directory. List /dev/null as dummy because if the wildcard expands
559
# to nothing then make would complain.
560
-include $(wildcard $(DEPDIR)/*.Po) /dev/null
563
clean distclean maintainer-clean: clean-deps
572
##########################################################################
574
# Native language support
576
ifeq ($(enable_nls), yes)
577
ifneq (,$(wildcard $(srcdir)/nls.mk))
579
include $(top_srcdir)/src/nls-global.mk
585
##########################################################################
589
# Explanation of involved files:
592
# foo.gcno gcov graph (a.k.a. "notes") file, created at compile time
593
# (by gcc -ftest-coverage)
594
# foo.gcda gcov data file, created when the program is run (for
595
# programs compiled with gcc -fprofile-arcs)
596
# foo.c.gcov gcov output file with coverage information, created by
597
# gcov from foo.gcda (by "make coverage")
598
# foo.c.gcov.out stdout captured when foo.c.gcov is created, mildly
600
# lcov.info lcov tracefile, built from gcda files in one directory,
601
# later collected by "make coverage-html"
603
ifeq ($(enable_coverage), yes)
605
# There is a strange interaction between lcov and existing .gcov
606
# output files. Hence the rm command and the ordering dependency.
608
gcda_files := $(wildcard *.gcda)
610
lcov.info: $(gcda_files)
612
$(if $^,$(LCOV) -d . -c -o $@ $(LCOVFLAGS))
614
%.c.gcov: %.gcda | lcov.info
615
$(GCOV) -b -f -p -o . $(GCOVFLAGS) $*.c >$*.c.gcov.out
619
clean distclean maintainer-clean: clean-coverage
621
.PHONY: clean-coverage
623
rm -f *.gcda *.gcno lcov.info *.gcov *.gcov.out
626
# User-callable target to reset counts between test runs
628
rm -f `find . -name '*.gcda' -print`
630
endif # enable_coverage
added
removed
src/Makefile.global.in
