1
/* Copyright (C) 1995-1998 Samba-Team */
2
/* Copyright (C) 1998 John H Terpstra <jht@aquasoft.com.au> */
4
/* local definitions for file server */
8
/* The default workgroup - usually overridden in smb.conf */
10
#define WORKGROUP "WORKGROUP"
13
/* the maximum debug level to compile into the code. This assumes a good
14
optimising compiler that can remove unused code
15
for embedded or low-memory systems set this to a value like 2 to get
16
only important messages. This gives *much* smaller binaries
18
#ifndef MAX_DEBUG_LEVEL
19
#define MAX_DEBUG_LEVEL 1000
22
/* This defines the section name in the configuration file that will contain */
23
/* global parameters - that is, parameters relating to the whole server, not */
24
/* just services. This name is then reserved, and may not be used as a */
25
/* a service name. It will default to "global" if not defined here. */
26
#define GLOBAL_NAME "global"
27
#define GLOBAL_NAME2 "globals"
29
/* This defines the section name in the configuration file that will
30
refer to the special "homes" service */
31
#define HOMES_NAME "homes"
33
/* This defines the section name in the configuration file that will
34
refer to the special "printers" service */
35
#define PRINTERS_NAME "printers"
37
/* Yves Gaige <yvesg@hptnodur.grenoble.hp.com> requested this set this */
38
/* to a maximum of 8 if old smb clients break because of long printer names. */
39
#define MAXPRINTERLEN 15
41
/* max number of directories open at once */
42
/* note that with the new directory code this no longer requires a
43
file handle per directory, but large numbers do use more memory */
44
#define MAX_OPEN_DIRECTORIES 256
46
/* max number of directory handles */
47
/* As this now uses the bitmap code this can be
49
#define MAX_DIRECTORY_HANDLES 2048
51
/* maximum number of file caches per smbd */
52
#define MAX_WRITE_CACHES 10
54
/* define what facility to use for syslog */
55
#ifndef SYSLOG_FACILITY
56
#define SYSLOG_FACILITY LOG_DAEMON
60
* Default number of maximum open files per smbd. This is
61
* also limited by the maximum available file descriptors
62
* per process and can also be set in smb.conf as "max open files"
63
* in the [global] section.
66
#ifndef MAX_OPEN_FILES
67
#define MAX_OPEN_FILES 10000
70
#define WORDMAX 0xFFFF
72
/* the maximum password length before we declare a likely attack */
73
#define MAX_PASS_LEN 200
75
/* separators for lists */
76
#define LIST_SEP " \t,;\n\r"
78
/* wchar separators for lists */
79
#define LIST_SEP_W wchar_list_sep
81
/* this is where browse lists are kept in the lock dir */
82
#define SERVER_LIST "browse.dat"
84
/* shall filenames with illegal chars in them get mangled in long
86
#define MANGLE_LONG_FILENAMES
88
/* define this if you want to stop spoofing with .. and soft links
89
NOTE: This also slows down the server considerably */
92
/* the size of the directory cache */
93
#define DIRCACHESIZE 20
95
/* what default type of filesystem do we want this to show up as in a
96
NT file manager window? */
97
#define FSTYPE_STRING "NTFS"
99
/* the default guest account - normally set in the Makefile or smb.conf */
100
#ifndef GUEST_ACCOUNT
101
#define GUEST_ACCOUNT "nobody"
104
/* user to test password server with as invalid in security=server mode. */
105
#ifndef INVALID_USER_PREFIX
106
#define INVALID_USER_PREFIX "sambatest"
109
/* the default pager to use for the client "more" command. Users can
110
override this with the PAGER environment variable */
115
/* the size of the uid cache used to reduce valid user checks */
116
#define VUID_CACHE_SIZE 32
118
/* the following control timings of various actions. Don't change
119
them unless you know what you are doing. These are all in seconds */
120
#define DEFAULT_SMBD_TIMEOUT (60*60*24*7)
121
#define SMBD_RELOAD_CHECK (180)
122
#define IDLE_CLOSED_TIMEOUT (60)
123
#define DPTR_IDLE_TIMEOUT (120)
124
#define SMBD_SELECT_TIMEOUT (60)
125
#define NMBD_SELECT_LOOP (10)
126
#define BROWSE_INTERVAL (60)
127
#define REGISTRATION_INTERVAL (10*60)
128
#define NMBD_INETD_TIMEOUT (120)
129
#define NMBD_MAX_TTL (24*60*60)
130
#define LPQ_LOCK_TIMEOUT (5)
131
#define NMBD_INTERFACES_RELOAD (120)
132
#define NMBD_UNEXPECTED_TIMEOUT (15)
134
/* the following are in milliseconds */
135
#define LOCK_RETRY_TIMEOUT (100)
137
/* do you want to dump core (carefully!) when an internal error is
138
encountered? Samba will be careful to make the core file only
139
accessible to root */
142
/* shall we support browse requests via a FIFO to nmbd? */
143
#define ENABLE_FIFO 1
145
/* how long (in miliseconds) to wait for a socket connect to happen */
146
#define LONG_CONNECT_TIMEOUT 30000
147
#define SHORT_CONNECT_TIMEOUT 5000
149
/* the default netbios keepalive timeout */
150
#define DEFAULT_KEEPALIVE 300
152
/* the directory to sit in when idle */
153
/* #define IDLE_DIR "/" */
155
/* Timout (in seconds) to wait for an oplock break
156
message to return from the client. */
158
#define OPLOCK_BREAK_TIMEOUT 30
160
/* Timout (in seconds) to add to the oplock break timeout
161
to wait for the smbd to smbd message to return. */
163
#define OPLOCK_BREAK_TIMEOUT_FUDGEFACTOR 2
165
/* the read preciction code has been disabled until some problems with
167
#define USE_READ_PREDICTION 0
170
* Default passwd chat script.
173
#define DEFAULT_PASSWD_CHAT "*new*password* %n\\n *new*password* %n\\n *changed*"
175
/* Minimum length of allowed password when changing UNIX password. */
176
#define MINPASSWDLENGTH 5
178
/* maximum ID number used for session control. This cannot be larger
179
than 62*62 for the current code */
180
#define MAX_SESSION_ID 3000
182
/* For the benifit of PAM and the 'session exec' scripts, we fake up a terminal
183
name. This can be in one of two forms: The first for systems not using
184
utmp (and therefore not constrained as to length or the need for a number
185
< 3000 or so) and the second for systems with this 'well behaved terminal
186
like name' constraint.
189
#ifndef SESSION_TEMPLATE
190
/* Paramaters are 'pid' and 'vuid' */
191
#define SESSION_TEMPLATE "smb/%lu/%d"
194
#ifndef SESSION_UTMP_TEMPLATE
195
#define SESSION_UTMP_TEMPLATE "smb/%d"
198
/* the maximum age in seconds of a password. Should be a lp_ parameter */
199
#define MAX_PASSWORD_AGE (21*24*60*60)
201
/* Default allocation roundup. */
202
#define SMB_ROUNDUP_ALLOCATION_SIZE 0x100000
204
/* shall we deny oplocks to clients that get timeouts? */
205
#define FASCIST_OPLOCK_BACKOFF 1
207
/* this enables the "rabbit pellet" fix for SMBwritebraw */
208
#define RABBIT_PELLET_FIX 1
210
/* Max number of jobs per print queue. */
211
#define PRINT_MAX_JOBID 10000
213
/* Max number of open RPC pipes. */
214
#define MAX_OPEN_PIPES 2048
216
/* Tuning for server auth mutex. */
217
#define CLI_AUTH_TIMEOUT 5000 /* In milli-seconds. */
218
#define NUM_CLI_AUTH_CONNECT_RETRIES 3
219
/* Number in seconds to wait for the mutex. This must be less than 30 seconds. */
220
#define SERVER_MUTEX_WAIT_TIME ( ((NUM_CLI_AUTH_CONNECT_RETRIES) * ((CLI_AUTH_TIMEOUT)/1000)) + 5)
221
/* Number in seconds for winbindd to wait for the mutex. Make this 2 * smbd wait time. */
222
#define WINBIND_SERVER_MUTEX_WAIT_TIME (( ((NUM_CLI_AUTH_CONNECT_RETRIES) * ((CLI_AUTH_TIMEOUT)/1000)) + 5)*2)
224
/* Max number of simultaneous winbindd socket connections. */
225
#define WINBINDD_MAX_SIMULTANEOUS_CLIENTS 200
227
/* Buffer size to use when printing backtraces */
228
#define BACKTRACE_STACK_SIZE 64
230
/* size of listen() backlog in smbd */
231
#define SMBD_LISTEN_BACKLOG 50
233
/* Number of microseconds to wait before a sharing violation. */
234
#define SHARING_VIOLATION_USEC_WAIT 950000
236
/* Number of microseconds to wait before a updating the write time (2 secs). */
237
#define WRITE_TIME_UPDATE_USEC_DELAY 2000000
239
#define MAX_LDAP_REPLICATION_SLEEP_TIME 5000 /* In milliseconds. */
241
/* tdb hash size for the open database. */
242
#define SMB_OPEN_DATABASE_TDB_HASH_SIZE 10007
244
/* Characters we disallow in sharenames. */
245
#define INVALID_SHARENAME_CHARS "%<>*?|/\\+=;:\","
247
/* Seconds between connection attempts to a remote server. */
248
#define FAILED_CONNECTION_CACHE_TIMEOUT 30
250
/* Default hash size for the winbindd cache. */
251
#define WINBINDD_CACHE_TDB_DEFAULT_HASH_SIZE 5000
253
/* Windows minimum lock resolution timeout in ms */
254
#define WINDOWS_MINIMUM_LOCK_TIMEOUT_MS 200
256
/* Maximum size of RPC data we will accept for one call. */
257
#define MAX_RPC_DATA_SIZE (15*1024*1024)