1
% texinfo.tex -- TeX macros to handle Texinfo files.
3
% Load plain if necessary, i.e., if running under initex.
4
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
6
\def\texinfoversion{2001-05-24.08}
8
% Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99,
9
% 2000, 01 Free Software Foundation, Inc.
11
% This texinfo.tex file is free software; you can redistribute it and/or
12
% modify it under the terms of the GNU General Public License as
13
% published by the Free Software Foundation; either version 2, or (at
14
% your option) any later version.
16
% This texinfo.tex file is distributed in the hope that it will be
17
% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
18
% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
19
% General Public License for more details.
21
% You should have received a copy of the GNU General Public License
22
% along with this texinfo.tex file; see the file COPYING. If not, write
23
% to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
24
% Boston, MA 02111-1307, USA.
26
% In other words, you are welcome to use, share and improve this program.
27
% You are forbidden to forbid anyone else to use, share and improve
28
% what you give them. Help stamp out software-hoarding!
30
% Please try the latest version of texinfo.tex before submitting bug
31
% reports; you can get the latest version from:
32
% ftp://ftp.gnu.org/gnu/texinfo.tex
33
% (and all GNU mirrors, see http://www.gnu.org/order/ftp.html)
34
% ftp://texinfo.org/tex/texinfo.tex
35
% ftp://us.ctan.org/macros/texinfo/texinfo.tex
36
% (and all CTAN mirrors, finger ctan@us.ctan.org for a list).
37
% /home/gd/gnu/doc/texinfo.tex on the GNU machines.
38
% The texinfo.tex in any given Texinfo distribution could well be out
39
% of date, so if that's what you're using, please check.
40
% Texinfo has a small home page at http://texinfo.org/.
42
% Send bug reports to bug-texinfo@gnu.org. Please include including a
43
% complete document in each bug report with which we can reproduce the
44
% problem. Patches are, of course, greatly appreciated.
46
% To process a Texinfo manual with TeX, it's most reliable to use the
47
% texi2dvi shell script that comes with the distribution. For a simple
48
% manual foo.texi, however, you can get away with this:
53
% dvips foo.dvi -o # or whatever, to process the dvi file; this makes foo.ps.
54
% The extra runs of TeX get the cross-reference information correct.
55
% Sometimes one run after texindex suffices, and sometimes you need more
56
% than two; texi2dvi does it as many times as necessary.
58
% It is possible to adapt texinfo.tex for other languages. You can get
59
% the existing language-specific files from ftp://ftp.gnu.org/gnu/texinfo/.
61
\message{Loading texinfo [version \texinfoversion]:}
63
% If in a .fmt file, print the version number
64
% and turn on active characters that we couldn't do earlier because
65
% they might have appeared in the input file name.
66
\everyjob{\message{[Texinfo version \texinfoversion]}%
67
\catcode`+=\active \catcode`\_=\active}
69
% Save some parts of plain tex whose names we will redefine.
71
\let\ptexbullet=\bullet
85
% We never want plain's outer \+ definition in Texinfo.
86
% For @tex, we can use \tabalign.
92
% If this character appears in an error message or help string, it
93
% starts a new line in the output.
96
% Set up fixed words for English if not already set.
97
\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
98
\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi
99
\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi
100
\ifx\putwordin\undefined \gdef\putwordin{in}\fi
101
\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
102
\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
103
\ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi
104
\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
105
\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi
106
\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi
107
\ifx\putwordof\undefined \gdef\putwordof{of}\fi
108
\ifx\putwordon\undefined \gdef\putwordon{on}\fi
109
\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi
110
\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi
111
\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi
112
\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi
113
\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi
114
\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi
115
\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi
117
\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
118
\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
119
\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
120
\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
121
\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
122
\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
123
\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
124
\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
125
\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
126
\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
127
\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
128
\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
130
\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi
131
\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi
132
\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi
133
\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi
134
\ifx\putwordDeftypevar\undefined\gdef\putwordDeftypevar{Variable}\fi
135
\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi
136
\ifx\putwordDeftypefun\undefined\gdef\putwordDeftypefun{Function}\fi
142
\hyphenation{ap-pen-dix}
143
\hyphenation{mini-buf-fer mini-buf-fers}
145
\hyphenation{white-space}
147
% Margin to add to right of even pages, to left of odd pages.
148
\newdimen \bindingoffset
149
\newdimen \normaloffset
150
\newdimen\pagewidth \newdimen\pageheight
152
% Sometimes it is convenient to have everything in the transcript file
153
% and nothing on the terminal. We don't just call \tracingall here,
154
% since that produces some useless output on the terminal.
156
\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
157
\ifx\eTeXversion\undefined
158
\def\loggingall{\tracingcommands2 \tracingstats2
159
\tracingpages1 \tracingoutput1 \tracinglostchars1
160
\tracingmacros2 \tracingparagraphs1 \tracingrestores1
161
\showboxbreadth\maxdimen\showboxdepth\maxdimen
164
\def\loggingall{\tracingcommands3 \tracingstats2
165
\tracingpages1 \tracingoutput1 \tracinglostchars1
166
\tracingmacros2 \tracingparagraphs1 \tracingrestores1
167
\tracingscantokens1 \tracingassigns1 \tracingifs1
168
\tracinggroups1 \tracingnesting2
169
\showboxbreadth\maxdimen\showboxdepth\maxdimen
173
% add check for \lastpenalty to plain's definitions. If the last thing
174
% we did was a \nobreak, we don't want to insert more space.
176
\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount
177
\removelastskip\penalty-50\smallskip\fi\fi}
178
\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount
179
\removelastskip\penalty-100\medskip\fi\fi}
180
\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
181
\removelastskip\penalty-200\bigskip\fi\fi}
183
% For @cropmarks command.
184
% Do @cropmarks to get crop marks.
187
\let\cropmarks = \cropmarkstrue
189
% Dimensions to add cropmarks at corners.
190
% Added by P. A. MacKay, 12 Nov. 1986
192
\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
193
\newdimen\cornerlong \cornerlong=1pc
194
\newdimen\cornerthick \cornerthick=.3pt
195
\newdimen\topandbottommargin \topandbottommargin=.75in
197
% Main output routine.
199
\output = {\onepageout{\pagecontents\PAGE}}
204
% \onepageout takes a vbox as an argument. Note that \pagecontents
205
% does insertions, but you have to call it yourself.
207
\ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
209
\ifodd\pageno \advance\hoffset by \bindingoffset
210
\else \advance\hoffset by -\bindingoffset\fi
212
% Do this outside of the \shipout so @code etc. will be expanded in
213
% the headline as they should be, not taken literally (outputting ''code).
214
\setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
215
\setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
218
% Have to do this stuff outside the \shipout because we want it to
219
% take effect in \write's, yet the group defined by the \vbox ends
220
% before the \shipout runs.
222
\escapechar = `\\ % use backslash in output files.
223
\indexdummies % don't expand commands in the output.
224
\normalturnoffactive % \ in index entries must not stay \, e.g., if
225
% the page break happens to be in the middle of an example.
227
% Do this early so pdf references go to the beginning of the page.
228
\ifpdfmakepagedest \pdfmkdest{\the\pageno} \fi
230
\ifcropmarks \vbox to \outervsize\bgroup
232
\vskip-\topandbottommargin
234
\line{\ewtop\hfil\ewtop}%
237
\vbox{\moveleft\cornerthick\nstop}%
239
\vbox{\moveright\cornerthick\nstop}%
242
\vskip\topandbottommargin
244
\hfil % center the page within the outer (page) hsize.
245
\ifodd\pageno\hskip\bindingoffset\fi
251
\ifdim\ht\footlinebox > 0pt
252
% Only leave this space if the footline is nonempty.
253
% (We lessened \vsize for it in \oddfootingxxx.)
254
% The \baselineskip=24pt in plain's \makefootline has no effect.
255
\vskip 2\baselineskip
260
\egroup % end of \vbox\bgroup
261
\hfil\egroup % end of (centering) \line\bgroup
262
\vskip\topandbottommargin plus1fill minus1fill
263
\boxmaxdepth = \cornerthick
266
\vbox{\moveleft\cornerthick\nsbot}%
268
\vbox{\moveright\cornerthick\nsbot}%
271
\line{\ewbot\hfil\ewbot}%
273
\egroup % \vbox from first cropmarks clause
275
}% end of \shipout\vbox
276
}% end of group with \turnoffactive
278
\ifnum\outputpenalty>-20000 \else\dosupereject\fi
281
\newinsert\margin \dimen\margin=\maxdimen
283
\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
285
\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
286
% marginal hacks, juha@viisa.uucp (Juha Takala)
287
\ifvoid\margin\else % marginal info is present
288
\rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
289
\dimen@=\dp#1 \unvbox#1
290
\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
291
\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
294
% Here are the rules for the cropmarks. Note that they are
295
% offset so that the space between them is truly \outerhsize or \outervsize
296
% (P. A. MacKay, 12 November, 1986)
298
\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
300
{\hrule height\cornerthick depth\cornerlong width\cornerthick}}
301
\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
303
{\hrule height\cornerlong depth\cornerthick width\cornerthick}}
305
% Parse an argument, then pass it to #1. The argument is the rest of
306
% the input line (except we remove a trailing comment). #1 should be a
307
% macro which expects an ordinary undelimited TeX argument.
313
\futurelet\temp\parseargx
316
% If the next token is an obeyed space (from an @example environment or
317
% the like), remove it and recurse. Otherwise, we're done.
319
% \obeyedspace is defined far below, after the definition of \sepspaces.
320
\ifx\obeyedspace\temp
321
\expandafter\parseargdiscardspace
323
\expandafter\parseargline
327
% Remove a single space (as the delimiter token to the macro call).
329
\gdef\parseargdiscardspace {\futurelet\temp\parseargx}}
332
\gdef\parseargline#1^^M{%
333
\endgroup % End of the group started in \parsearg.
335
% First remove any @c comment, then any @comment.
336
% Result of each macro is put in \toks0.
337
\argremovec #1\c\relax %
338
\expandafter\argremovecomment \the\toks0 \comment\relax %
340
% Call the caller's macro, saved as \next in \parsearg.
341
\expandafter\next\expandafter{\the\toks0}%
345
% Since all \c{,omment} does is throw away the argument, we can let TeX
346
% do that for us. The \relax here is matched by the \relax in the call
347
% in \parseargline; it could be more or less anything, its purpose is
348
% just to delimit the argument to the \c.
349
\def\argremovec#1\c#2\relax{\toks0 = {#1}}
350
\def\argremovecomment#1\comment#2\relax{\toks0 = {#1}}
352
% \argremovec{,omment} might leave us with trailing spaces, though; e.g.,
353
% @end itemize @c foo
354
% will have two active spaces as part of the argument with the
355
% `itemize'. Here we remove all active spaces from #1, and assign the
358
% This loses if there are any *other* active characters besides spaces
359
% in the argument -- _ ^ +, for example -- since they get expanded.
360
% Fortunately, Texinfo does not define any such commands. (If it ever
361
% does, the catcode of the characters in questionwill have to be changed
362
% here.) But this means we cannot call \removeactivespaces as part of
363
% \argremovec{,omment}, since @c uses \parsearg, and thus the argument
364
% that \parsearg gets might well have any character at all in it.
366
\def\removeactivespaces#1{%
370
\global\toks0 = \expandafter{\temp}%
374
% Change the active space to expand to nothing.
378
\gdef\ignoreactivespaces{\obeyspaces\let =\empty}
382
\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
384
%% These are used to keep @begin/@end levels from running away
385
%% Call \inENV within environments (after a \begingroup)
386
\newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi}
388
\ifENV\errmessage{Still within an environment; press RETURN to continue}
389
\endgroup\fi} % This is not perfect, but it should reduce lossage
391
% @begin foo is the same as @foo, for now.
392
\newhelp\EMsimple{Press RETURN to continue.}
394
\outer\def\begin{\parsearg\beginxxx}
397
\expandafter\ifx\csname #1\endcsname\relax
398
{\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else
399
\csname #1\endcsname\fi}
401
% @end foo executes the definition of \Efoo.
403
\def\end{\parsearg\endxxx}
405
\removeactivespaces{#1}%
406
\edef\endthing{\the\toks0}%
408
\expandafter\ifx\csname E\endthing\endcsname\relax
409
\expandafter\ifx\csname \endthing\endcsname\relax
410
% There's no \foo, i.e., no ``environment'' foo.
412
\errmessage{Undefined command `@end \endthing'}%
414
\unmatchedenderror\endthing
417
% Everything's ok; the right environment has been started.
418
\csname E\endthing\endcsname
422
% There is an environment #1, but it hasn't been started. Give an error.
424
\def\unmatchedenderror#1{%
426
\errmessage{This `@end #1' doesn't have a matching `@#1'}%
429
% Define the control sequence \E#1 to give an unmatched @end error.
431
\def\defineunmatchedend#1{%
432
\expandafter\def\csname E#1\endcsname{\unmatchedenderror{#1}}%
436
% Single-spacing is done by various environments (specifically, in
437
% \nonfillstart and \quotations).
438
\newskip\singlespaceskip \singlespaceskip = 12.5pt
440
% Why was this kern here? It messes up equalizing space above and below
441
% environments. --karl, 6may93
442
%{\advance \baselineskip by -\singlespaceskip
443
%\kern \baselineskip}%
444
\setleading \singlespaceskip
447
%% Simple single-character @ commands
450
% Kludge this until the fonts are right (grr).
453
% This is turned off because it was never documented
454
% and you can use @w{...} around a quote to suppress ligatures.
455
%% Define @` and @' to be the same as ` and '
456
%% but suppressing ligatures.
460
% Used to generate quoted braces.
461
\def\mylbrace {{\tt\char123}}
462
\def\myrbrace {{\tt\char125}}
466
% Definitions to produce actual \{ & \} command in an index.
467
\catcode`\{ = 12 \catcode`\} = 12
468
\catcode`\[ = 1 \catcode`\] = 2
469
\catcode`\@ = 0 \catcode`\\ = 12
474
% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
475
% Others are defined by plain TeX: @` @' @" @^ @~ @= @v @H.
478
\def\ringaccent#1{{\accent23 #1}}
483
% Other special characters: @questiondown @exclamdown
484
% Plain TeX defines: @AA @AE @O @OE @L (and lowercase versions) @ss.
485
\def\questiondown{?`}
488
% Dotless i and dotless j, used for accents.
493
\ifx\temp\imacro \ptexi
494
\else\ifx\temp\jmacro \j
495
\else \errmessage{@dotless can be used only with i or j}%
499
% Be sure we're in horizontal mode when doing a tie, since we make space
500
% equivalent to this in @example-like environments. Otherwise, a space
501
% at the beginning of a line will start with \penalty -- and
502
% since \penalty is valid in vertical mode, we'd end up putting the
503
% penalty on the vertical list instead of in the new paragraph.
505
% Avoid using \@M directly, because that causes trouble
506
% if the definition is written into an index file.
507
\global\let\tiepenalty = \@M
508
\gdef\tie{\leavevmode\penalty\tiepenalty\ }
511
% @: forces normal size whitespace following.
512
\def\:{\spacefactor=1000 }
514
% @* forces a line break.
515
\def\*{\hfil\break\hbox{}\ignorespaces}
517
% @. is an end-of-sentence period.
518
\def\.{.\spacefactor=3000 }
520
% @! is an end-of-sentence bang.
521
\def\!{!\spacefactor=3000 }
523
% @? is an end-of-sentence query.
524
\def\?{?\spacefactor=3000 }
526
% @w prevents a word break. Without the \leavevmode, @w at the
527
% beginning of a paragraph, when TeX is still in vertical mode, would
528
% produce a whole line of output instead of starting the paragraph.
529
\def\w#1{\leavevmode\hbox{#1}}
531
% @group ... @end group forces ... to be all on one page, by enclosing
532
% it in a TeX vbox. We use \vtop instead of \vbox to construct the box
533
% to keep its height that of a normal line. According to the rules for
534
% \topskip (p.114 of the TeXbook), the glue inserted is
535
% max (\topskip - \ht (first item), 0). If that height is large,
536
% therefore, no glue is inserted, and the space between the headline and
537
% the text is small, which looks bad.
539
\def\group{\begingroup
540
\ifnum\catcode13=\active \else
541
\errhelp = \groupinvalidhelp
542
\errmessage{@group invalid in context where filling is enabled}%
545
% The \vtop we start below produces a box with normal height and large
546
% depth; thus, TeX puts \baselineskip glue before it, and (when the
547
% next line of text is done) \lineskip glue after it. (See p.82 of
548
% the TeXbook.) Thus, space below is not quite equal to space
549
% above. But it's pretty close.
551
\egroup % End the \vtop.
552
\endgroup % End the \group.
556
% We have to put a strut on the last line in case the @group is in
557
% the midst of an example, rather than completely enclosing it.
558
% Otherwise, the interline space between the last line of the group
559
% and the first line afterwards is too small. But we can't put the
560
% strut in \Egroup, since there it would be on a line by itself.
561
% Hence this just inserts a strut at the beginning of each line.
562
\everypar = {\strut}%
564
% Since we have a strut on every line, we don't need any of TeX's
565
% normal interline spacing.
568
% OK, but now we have to do something about blank
569
% lines in the input in @example-like environments, which normally
570
% just turn into \lisppar, which will insert no space now that we've
571
% turned off the interline space. Simplest is to make them be an
574
\edef\par{\leavevmode \par}%
576
% Reset ^^M's definition to new definition of \par.
580
% Do @comment since we are called inside an environment such as
581
% @example, where each end-of-line in the input causes an
582
% end-of-line in the output. We don't want the end-of-line after
583
% the `@group' to put extra space in the output. Since @group
584
% should appear on a line by itself (according to the Texinfo
585
% manual), we don't worry about eating any user text.
589
% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
590
% message, so this ends up printing `@group can only ...'.
592
\newhelp\groupinvalidhelp{%
593
group can only be used in environments such as @example,^^J%
594
where each line of input produces a line of output.}
596
% @need space-in-mils
597
% forces a page break if there is not space-in-mils remaining.
599
\newdimen\mil \mil=0.001in
601
\def\need{\parsearg\needx}
603
% Old definition--didn't work.
604
%\def\needx #1{\par %
605
%% This method tries to make TeX break the page naturally
606
%% if the depth of the box does not fit.
608
%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak
613
% Ensure vertical mode, so we don't make a big box in the middle of a
617
% If the @need value is less than one line space, it's useless.
619
\dimen2 = \ht\strutbox
620
\advance\dimen2 by \dp\strutbox
621
\ifdim\dimen0 > \dimen2
623
% Do a \strut just to make the height of this box be normal, so the
624
% normal leading is inserted relative to the preceding line.
625
% And a page break here is fine.
626
\vtop to #1\mil{\strut\vfil}%
628
% TeX does not even consider page breaks if a penalty added to the
629
% main vertical list is 10000 or more. But in order to see if the
630
% empty box we just added fits on the page, we must make it consider
631
% page breaks. On the other hand, we don't want to actually break the
632
% page after the empty box. So we use a penalty of 9999.
634
% There is an extremely small chance that TeX will actually break the
635
% page at this \penalty, if there are no other feasible breakpoints in
636
% sight. (If the user is using lots of big @group commands, which
637
% almost-but-not-quite fill up a page, TeX will have a hard time doing
638
% good page breaking, for example.) However, I could not construct an
639
% example where a page broke at this \penalty; if it happens in a real
640
% document, then we can reconsider our strategy.
643
% Back up by the size of the box, whether we did a page break or not.
646
% Do not allow a page break right after this kern.
651
% @br forces paragraph break
655
% @dots{} output an ellipsis using the current font.
656
% We do .5em per period so that it has the same spacing in a typewriter
657
% font as three actual period characters.
662
\hskip 0pt plus 0.25fil minus 0.25fil
664
\hskip 0pt plus 0.5fil minus 0.5fil
668
% @enddots{} is an end-of-sentence ellipsis.
673
\hskip 0pt plus 0.25fil minus 0.25fil
675
\hskip 0pt plus 0.5fil minus 0.5fil
681
% @page forces the start of a new page
683
\def\page{\par\vfill\supereject}
686
% outputs text on separate line in roman font, starting at standard page margin
688
% This records the amount of indent in the innermost environment.
689
% That's how much \exdent should take out.
690
\newskip\exdentamount
692
% This defn is used inside fill environments such as @defun.
693
\def\exdent{\parsearg\exdentyyy}
694
\def\exdentyyy #1{{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}}
696
% This defn is used inside nofill environments such as @example.
697
\def\nofillexdent{\parsearg\nofillexdentyyy}
698
\def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount
699
\leftline{\hskip\leftskip{\rm#1}}}}
701
% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
702
% paragraph. For more general purposes, use the \margin insertion
703
% class. WHICH is `l' or `r'.
705
\newskip\inmarginspacing \inmarginspacing=1cm
706
\def\strutdepth{\dp\strutbox}
708
\def\doinmargin#1#2{\strut\vadjust{%
711
\vtop to \strutdepth{%
712
\baselineskip=\strutdepth
714
% if you have multiple lines of stuff to put here, you'll need to
715
% make the vbox yourself of the appropriate size.
717
\llap{\ignorespaces #2\hskip\inmarginspacing}%
719
\rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}%
724
\def\inleftmargin{\doinmargin l}
725
\def\inrightmargin{\doinmargin r}
727
% @inmargin{TEXT [, RIGHT-TEXT]}
728
% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right;
729
% else use TEXT for both).
731
\def\inmargin#1{\parseinmargin #1,,\finish}
732
\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing.
733
\setbox0 = \hbox{\ignorespaces #2}%
735
\def\lefttext{#1}% have both texts
738
\def\lefttext{#1}% have only one text
743
\def\temp{\inrightmargin\righttext}% odd page -> outside is right margin
745
\def\temp{\inleftmargin\lefttext}%
750
% @include file insert text of that file as input.
751
% Allow normal characters that we make active in the argument (a file name).
752
\def\include{\begingroup
761
\parsearg\includezzz}
762
% Restore active chars for included file.
763
\def\includezzz#1{\endgroup\begingroup
764
% Read the included file in a group so nested @include's work.
771
% @center line outputs that line, centered
773
\def\center{\parsearg\centerzzz}
774
\def\centerzzz #1{{\advance\hsize by -\leftskip
775
\advance\hsize by -\rightskip
778
% @sp n outputs n lines of vertical space
780
\def\sp{\parsearg\spxxx}
781
\def\spxxx #1{\vskip #1\baselineskip}
783
% @comment ...line which is ignored...
784
% @c is the same as @comment
785
% @ignore ... @end ignore is another way to write a comment
787
\def\comment{\begingroup \catcode`\^^M=\other%
788
\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
790
{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
794
% @paragraphindent NCHARS
795
% We'll use ems for NCHARS, close enough.
796
% We cannot implement @paragraphindent asis, though.
798
\def\asisword{asis} % no translation, these are keywords
801
\def\paragraphindent{\parsearg\doparagraphindent}
802
\def\doparagraphindent#1{%
807
\defaultparindent = 0pt
809
\defaultparindent = #1em
812
\parindent = \defaultparindent
815
% @exampleindent NCHARS
816
% We'll use ems for NCHARS like @paragraphindent.
817
% It seems @exampleindent asis isn't necessary, but
818
% I preserve it to make it similar to @paragraphindent.
819
\def\exampleindent{\parsearg\doexampleindent}
820
\def\doexampleindent#1{%
827
\lispnarrowing = #1em
832
% @asis just yields its argument. Used with @table, for example.
836
% @math means output in math mode.
837
% We don't use $'s directly in the definition of \math because control
838
% sequences like \math are expanded when the toc file is written. Then,
839
% we read the toc file back, the $'s will be normal characters (as they
840
% should be, according to the definition of Texinfo). So we must use a
841
% control sequence to switch into and out of math mode.
843
% This isn't quite enough for @math to work properly in indices, but it
844
% seems unlikely it will ever be needed there.
846
\let\implicitmath = $
847
\def\math#1{\implicitmath #1\implicitmath}
849
% @bullet and @minus need the same treatment as @math, just above.
850
\def\bullet{\implicitmath\ptexbullet\implicitmath}
851
\def\minus{\implicitmath-\implicitmath}
853
% @refill is a no-op.
856
% If working on a large document in chapters, it is convenient to
857
% be able to disable indexing, cross-referencing, and contents, for test runs.
858
% This is done with @novalidate (before @setfilename).
860
\newif\iflinks \linkstrue % by default we want the aux files.
861
\let\novalidate = \linksfalse
863
% @setfilename is done at the beginning of every texinfo file.
864
% So open here the files we need to have open while reading the input.
865
% This makes it possible to make a .fmt file for texinfo.
869
\fi % \openindices needs to do some work in any case.
871
\fixbackslash % Turn off hack to swallow `\input texinfo'.
872
\global\let\setfilename=\comment % Ignore extra @setfilename cmds.
874
% If texinfo.cnf is present on the system, read it.
875
% Useful for site-wide @afourpaper, etc.
876
% Just to be on the safe side, close the input stream before the \input.
877
\openin 1 texinfo.cnf
878
\ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi
882
\comment % Ignore the actual filename.
885
% Called from \setfilename.
897
\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
901
% adobe `portable' document format
905
\newcount\filenamelength
914
\newif\ifpdfmakepagedest
916
\ifx\pdfoutput\undefined
918
\let\pdfmkdest = \gobble
919
\let\pdfurl = \gobble
920
\let\endlink = \relax
921
\let\linkcolor = \relax
922
\let\pdfmakeoutlines = \relax
927
\def\dopdfimage#1#2#3{%
929
\def\imageheight{#3}%
930
\ifnum\pdftexversion < 14
935
\ifx\empty\imagewidth\else width \imagewidth \fi
936
\ifx\empty\imageheight\else height \imageheight \fi
937
\ifnum\pdftexversion<13
942
\ifnum\pdftexversion < 14 \else
943
\pdfrefximage \pdflastximage
945
\def\pdfmkdest#1{\pdfdest name{#1} xyz}
947
\let\linkcolor = \Blue % was Cyan, but that seems light?
948
\def\endlink{\Black\pdfendlink}
949
% Adding outlines to PDF; macros for calculating structure of outlines
950
% come from Petr Olsak
951
\def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
952
\else \csname#1\endcsname \fi}
953
\def\advancenumber#1{\tempnum=\expnumber{#1}\relax
955
\expandafter\xdef\csname#1\endcsname{\the\tempnum}}
956
\def\pdfmakeoutlines{{%
957
\openin 1 \jobname.toc
962
\let\_ = \normalunderscore
963
% Thanh's hack / proper braces in bookmarks
964
\edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
965
\edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
967
\def\chapentry ##1##2##3{}
968
\def\unnumbchapentry ##1##2{}
969
\def\secentry ##1##2##3##4{\advancenumber{chap##2}}
970
\def\unnumbsecentry ##1##2{}
971
\def\subsecentry ##1##2##3##4##5{\advancenumber{sec##2.##3}}
972
\def\unnumbsubsecentry ##1##2{}
973
\def\subsubsecentry ##1##2##3##4##5##6{\advancenumber{subsec##2.##3.##4}}
974
\def\unnumbsubsubsecentry ##1##2{}
976
\def\chapentry ##1##2##3{%
977
\pdfoutline goto name{\pdfmkpgn{##3}}count-\expnumber{chap##2}{##1}}
978
\def\unnumbchapentry ##1##2{%
979
\pdfoutline goto name{\pdfmkpgn{##2}}{##1}}
980
\def\secentry ##1##2##3##4{%
981
\pdfoutline goto name{\pdfmkpgn{##4}}count-\expnumber{sec##2.##3}{##1}}
982
\def\unnumbsecentry ##1##2{%
983
\pdfoutline goto name{\pdfmkpgn{##2}}{##1}}
984
\def\subsecentry ##1##2##3##4##5{%
985
\pdfoutline goto name{\pdfmkpgn{##5}}count-\expnumber{subsec##2.##3.##4}{##1}}
986
\def\unnumbsubsecentry ##1##2{%
987
\pdfoutline goto name{\pdfmkpgn{##2}}{##1}}
988
\def\subsubsecentry ##1##2##3##4##5##6{%
989
\pdfoutline goto name{\pdfmkpgn{##6}}{##1}}
990
\def\unnumbsubsubsecentry ##1##2{%
991
\pdfoutline goto name{\pdfmkpgn{##2}}{##1}}
996
\def\params{#1}\def\E{END}%
998
\let\nextmakelinks=\relax
1000
\let\nextmakelinks=\makelinks
1001
\ifnum\lnkcount>0,\fi
1003
\startlink attr{/Border [0 0 0]}
1004
goto name{\pdfmkpgn{\the\pgn}}%
1006
\advance\lnkcount by 1%
1011
\def\picknum#1{\expandafter\pn#1}
1022
\def\ppn#1{\pgn=#1\gobble}
1023
\def\ppnn{\pgn=\first}
1024
\def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,}
1025
\def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
1026
\def\skipspaces#1{\def\PP{#1}\def\D{|}%
1027
\ifx\PP\D\let\nextsp\relax
1028
\else\let\nextsp\skipspaces
1029
\ifx\p\space\else\addtokens{\filename}{\PP}%
1030
\advance\filenamelength by 1
1034
\def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
1035
\ifnum\pdftexversion < 14
1036
\let \startlink \pdfannotlink
1038
\let \startlink \pdfstartlink
1042
\normalturnoffactive\def\@{@}%
1043
\let\value=\expandablevalue
1045
\startlink attr{/Border [0 0 0]}%
1046
user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
1049
\def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
1050
\def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
1051
\def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
1052
\def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
1054
\expandafter\poptoks\the\toksA|ENDTOKS|
1056
\else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
1057
\else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
1058
\else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
1060
\ifnum0=\countA\else\makelink\fi
1061
\ifx\first.\let\next=\done\else
1063
\addtokens{\toksB}{\the\toksD}
1064
\ifx\first,\addtokens{\toksB}{\space}\fi
1066
\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
1068
\def\makelink{\addtokens{\toksB}%
1069
{\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
1071
\startlink attr{/Border [0 0 0]} goto name{\mkpgn{#1}}
1072
\linkcolor #1\endlink}
1074
\def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
1075
\fi % \ifx\pdfoutput
1079
% Font-change commands.
1081
% Texinfo sort of supports the sans serif font style, which plain TeX does not.
1082
% So we set up a \sf analogous to plain's \rm, etc.
1084
\def\sf{\fam=\sffam \tensf}
1085
\let\li = \sf % Sometimes we call it \li, not \sf.
1087
% We don't need math for this one.
1090
% Use Computer Modern fonts at \magstephalf (11pt).
1091
\newcount\mainmagstep
1092
\mainmagstep=\magstephalf
1094
% Set the font macro #1 to the font named #2, adding on the
1095
% specified font prefix (normally `cm').
1096
% #3 is the font's design size, #4 is a scale factor
1097
\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
1099
% Use cm as the default font prefix.
1100
% To specify the font prefix, you must define \fontprefix
1101
% before you read in texinfo.tex.
1102
\ifx\fontprefix\undefined
1105
% Support font families that don't use the same naming scheme as CM.
1107
\def\rmbshape{bx} %where the normal face is bold
1112
\def\ttslshape{sltt}
1123
\let\mainmagstep=\magstep1
1124
\setfont\textrm\rmshape{12}{1000}
1125
\setfont\texttt\ttshape{12}{1000}
1127
\setfont\textrm\rmshape{10}{\mainmagstep}
1128
\setfont\texttt\ttshape{10}{\mainmagstep}
1130
% Instead of cmb10, you many want to use cmbx10.
1131
% cmbx10 is a prettier font on its own, but cmb10
1132
% looks better when embedded in a line with cmr10.
1133
\setfont\textbf\bfshape{10}{\mainmagstep}
1134
\setfont\textit\itshape{10}{\mainmagstep}
1135
\setfont\textsl\slshape{10}{\mainmagstep}
1136
\setfont\textsf\sfshape{10}{\mainmagstep}
1137
\setfont\textsc\scshape{10}{\mainmagstep}
1138
\setfont\textttsl\ttslshape{10}{\mainmagstep}
1139
\font\texti=cmmi10 scaled \mainmagstep
1140
\font\textsy=cmsy10 scaled \mainmagstep
1142
% A few fonts for @defun, etc.
1143
\setfont\defbf\bxshape{10}{\magstep1} %was 1314
1144
\setfont\deftt\ttshape{10}{\magstep1}
1145
\def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf}
1147
% Fonts for indices, footnotes, small examples (9pt).
1148
\setfont\smallrm\rmshape{9}{1000}
1149
\setfont\smalltt\ttshape{9}{1000}
1150
\setfont\smallbf\bfshape{10}{900}
1151
\setfont\smallit\itshape{9}{1000}
1152
\setfont\smallsl\slshape{9}{1000}
1153
\setfont\smallsf\sfshape{9}{1000}
1154
\setfont\smallsc\scshape{10}{900}
1155
\setfont\smallttsl\ttslshape{10}{900}
1159
% Fonts for title page:
1160
\setfont\titlerm\rmbshape{12}{\magstep3}
1161
\setfont\titleit\itbshape{10}{\magstep4}
1162
\setfont\titlesl\slbshape{10}{\magstep4}
1163
\setfont\titlett\ttbshape{12}{\magstep3}
1164
\setfont\titlettsl\ttslshape{10}{\magstep4}
1165
\setfont\titlesf\sfbshape{17}{\magstep1}
1166
\let\titlebf=\titlerm
1167
\setfont\titlesc\scbshape{10}{\magstep4}
1168
\font\titlei=cmmi12 scaled \magstep3
1169
\font\titlesy=cmsy10 scaled \magstep4
1170
\def\authorrm{\secrm}
1172
% Chapter (and unnumbered) fonts (17.28pt).
1173
\setfont\chaprm\rmbshape{12}{\magstep2}
1174
\setfont\chapit\itbshape{10}{\magstep3}
1175
\setfont\chapsl\slbshape{10}{\magstep3}
1176
\setfont\chaptt\ttbshape{12}{\magstep2}
1177
\setfont\chapttsl\ttslshape{10}{\magstep3}
1178
\setfont\chapsf\sfbshape{17}{1000}
1180
\setfont\chapsc\scbshape{10}{\magstep3}
1181
\font\chapi=cmmi12 scaled \magstep2
1182
\font\chapsy=cmsy10 scaled \magstep3
1184
% Section fonts (14.4pt).
1185
\setfont\secrm\rmbshape{12}{\magstep1}
1186
\setfont\secit\itbshape{10}{\magstep2}
1187
\setfont\secsl\slbshape{10}{\magstep2}
1188
\setfont\sectt\ttbshape{12}{\magstep1}
1189
\setfont\secttsl\ttslshape{10}{\magstep2}
1190
\setfont\secsf\sfbshape{12}{\magstep1}
1192
\setfont\secsc\scbshape{10}{\magstep2}
1193
\font\seci=cmmi12 scaled \magstep1
1194
\font\secsy=cmsy10 scaled \magstep2
1196
% \setfont\ssecrm\bxshape{10}{\magstep1} % This size an font looked bad.
1197
% \setfont\ssecit\itshape{10}{\magstep1} % The letters were too crowded.
1198
% \setfont\ssecsl\slshape{10}{\magstep1}
1199
% \setfont\ssectt\ttshape{10}{\magstep1}
1200
% \setfont\ssecsf\sfshape{10}{\magstep1}
1202
%\setfont\ssecrm\bfshape{10}{1315} % Note the use of cmb rather than cmbx.
1203
%\setfont\ssecit\itshape{10}{1315} % Also, the size is a little larger than
1204
%\setfont\ssecsl\slshape{10}{1315} % being scaled magstep1.
1205
%\setfont\ssectt\ttshape{10}{1315}
1206
%\setfont\ssecsf\sfshape{10}{1315}
1208
%\let\ssecbf=\ssecrm
1210
% Subsection fonts (13.15pt).
1211
\setfont\ssecrm\rmbshape{12}{\magstephalf}
1212
\setfont\ssecit\itbshape{10}{1315}
1213
\setfont\ssecsl\slbshape{10}{1315}
1214
\setfont\ssectt\ttbshape{12}{\magstephalf}
1215
\setfont\ssecttsl\ttslshape{10}{1315}
1216
\setfont\ssecsf\sfbshape{12}{\magstephalf}
1218
\setfont\ssecsc\scbshape{10}{\magstep1}
1219
\font\sseci=cmmi12 scaled \magstephalf
1220
\font\ssecsy=cmsy10 scaled 1315
1221
% The smallcaps and symbol fonts should actually be scaled \magstep1.5,
1222
% but that is not a standard magnification.
1224
% In order for the font changes to affect most math symbols and letters,
1225
% we have to define the \textfont of the standard families. Since
1226
% texinfo doesn't allow for producing subscripts and superscripts, we
1227
% don't bother to reset \scriptfont and \scriptscriptfont (which would
1228
% also require loading a lot more fonts).
1230
\def\resetmathfonts{%
1231
\textfont0 = \tenrm \textfont1 = \teni \textfont2 = \tensy
1232
\textfont\itfam = \tenit \textfont\slfam = \tensl \textfont\bffam = \tenbf
1233
\textfont\ttfam = \tentt \textfont\sffam = \tensf
1237
% The font-changing commands redefine the meanings of \tenSTYLE, instead
1238
% of just \STYLE. We do this so that font changes will continue to work
1239
% in math mode, where it is the current \fam that is relevant in most
1240
% cases, not the current font. Plain TeX does \def\bf{\fam=\bffam
1241
% \tenbf}, for example. By redefining \tenbf, we obviate the need to
1242
% redefine \bf itself.
1244
\let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
1245
\let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
1246
\let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl
1249
\let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
1250
\let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
1251
\let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
1252
\let\tenttsl=\titlettsl
1253
\resetmathfonts \setleading{25pt}}
1254
\def\titlefont#1{{\titlefonts\rm #1}}
1256
\let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
1257
\let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
1258
\let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl
1259
\resetmathfonts \setleading{19pt}}
1261
\let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
1262
\let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
1263
\let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl
1264
\resetmathfonts \setleading{16pt}}
1266
\let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
1267
\let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
1268
\let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl
1269
\resetmathfonts \setleading{15pt}}
1270
\let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf?
1272
\let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
1273
\let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
1274
\let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
1275
\let\tenttsl=\smallttsl
1276
\resetmathfonts \setleading{11pt}}
1278
% Set up the default fonts, so we can use them for creating boxes.
1282
% Define these so they can be easily changed for other fonts.
1283
\def\angleleft{$\langle$}
1284
\def\angleright{$\rangle$}
1286
% Count depth in font-changes, for error checks
1287
\newcount\fontdepth \fontdepth=0
1289
% Fonts for short table of contents.
1290
\setfont\shortcontrm\rmshape{12}{1000}
1291
\setfont\shortcontbf\bxshape{12}{1000}
1292
\setfont\shortcontsl\slshape{12}{1000}
1294
%% Add scribe-like font environments, plus @l for inline lisp (usually sans
1295
%% serif) and @ii for TeX italic
1297
% \smartitalic{ARG} outputs arg in italics, followed by an italic correction
1298
% unless the following character is such as not to need one.
1299
\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else\/\fi\fi\fi}
1300
\def\smartslanted#1{{\sl #1}\futurelet\next\smartitalicx}
1301
\def\smartitalic#1{{\it #1}\futurelet\next\smartitalicx}
1304
\let\var=\smartslanted
1305
\let\dfn=\smartslanted
1306
\let\emph=\smartitalic
1307
\let\cite=\smartslanted
1312
% We can't just use \exhyphenpenalty, because that only has effect at
1313
% the end of a paragraph. Restore normal hyphenation at the end of the
1314
% group within which \nohyphenation is presumably called.
1316
\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation}
1317
\def\restorehyphenation{\hyphenchar\font = `- }
1320
{\tt \rawbackslash \frenchspacing #1}%
1324
\def\samp#1{`\tclose{#1}'\null}
1325
\setfont\keyrm\rmshape{8}{1000}
1327
\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
1328
\raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
1329
\vbox{\hrule\kern-0.4pt
1330
\hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
1332
\kern-.06em\raise0.4pt\hbox{\angleright}}}}
1333
% The old definition, with no lozenge:
1334
%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
1335
\def\ctrl #1{{\tt \rawbackslash \hat}#1}
1337
% @file, @option are the same as @samp.
1341
% @code is a modification of @t,
1342
% which makes spaces the same size as normal in the surrounding text.
1345
% Change normal interword space to be same as for the current font.
1346
\spaceskip = \fontdimen2\font
1348
% Switch to typewriter.
1351
% But `\ ' produces the large typewriter interword space.
1352
\def\ {{\spaceskip = 0pt{} }}%
1354
% Turn off hyphenation.
1364
% We *must* turn on hyphenation at `-' and `_' in \code.
1365
% Otherwise, it is too hard to avoid overfull hboxes
1366
% in the Emacs manual, the Library manual, etc.
1368
% Unfortunately, TeX uses one parameter (\hyphenchar) to control
1369
% both hyphenation at - and hyphenation within words.
1370
% We must therefore turn them both off (\tclose does that)
1371
% and arrange explicitly to hyphenate at a dash.
1377
\global\def\code{\begingroup
1378
\catcode`\-=\active \let-\codedash
1379
\catcode`\_=\active \let_\codeunder
1383
% If we end up with any active - characters when handling the index,
1384
% just treat them as a normal -.
1385
\global\def\indexbreaks{\catcode`\-=\active \let-\realdash}
1389
\def\codedash{-\discretionary{}{}{}}
1390
\def\codeunder{\ifusingtt{\normalunderscore\discretionary{}{}{}}{\_}}
1391
\def\codex #1{\tclose{#1}\endgroup}
1393
%\let\exp=\tclose %Was temporary
1395
% @kbd is like @code, except that if the argument is just one @key command,
1396
% then @kbd has no effect.
1398
% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
1399
% `example' (@kbd uses ttsl only inside of @example and friends),
1400
% or `code' (@kbd uses normal tty font always).
1401
\def\kbdinputstyle{\parsearg\kbdinputstylexxx}
1402
\def\kbdinputstylexxx#1{%
1404
\ifx\arg\worddistinct
1405
\gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
1406
\else\ifx\arg\wordexample
1407
\gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
1408
\else\ifx\arg\wordcode
1409
\gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
1412
\def\worddistinct{distinct}
1413
\def\wordexample{example}
1416
% Default is kbdinputdistinct. (Too much of a hassle to call the macro,
1417
% the catcodes are wrong for parsearg to work.)
1418
\gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}
1421
\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
1422
\ifx\one\xkey\ifx\threex\three \key{#2}%
1423
\else{\tclose{\kbdfont\look}}\fi
1424
\else{\tclose{\kbdfont\look}}\fi}
1426
% For @url, @env, @command quotes seem unnecessary, so use \code.
1431
% @uref (abbreviation for `urlref') takes an optional (comma-separated)
1432
% second argument specifying the text to display and an optional third
1433
% arg as text to display instead of (rather than in addition to) the url
1434
% itself. First (mandatory) arg is the url. Perhaps eventually put in
1435
% a hypertex \special here.
1437
\def\uref#1{\douref #1,,,\finish}
1438
\def\douref#1,#2,#3,#4\finish{\begingroup
1441
\setbox0 = \hbox{\ignorespaces #3}%
1443
\unhbox0 % third arg given, show only that
1445
\setbox0 = \hbox{\ignorespaces #2}%
1448
\unhbox0 % PDF: 2nd arg given, show only it
1450
\unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url
1453
\code{#1}% only url given, so show it
1459
% rms does not like angle brackets --karl, 17may97.
1460
% So now @email is just like @uref, unless we are pdf.
1462
%\def\email#1{\angleleft{\tt #1}\angleright}
1464
\def\email#1{\doemail#1,,\finish}
1465
\def\doemail#1,#2,#3\finish{\begingroup
1468
\setbox0 = \hbox{\ignorespaces #2}%
1469
\ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
1476
% Check if we are currently using a typewriter font. Since all the
1477
% Computer Modern typewriter fonts have zero interword stretch (and
1478
% shrink), and it is reasonable to expect all typewriter fonts to have
1479
% this property, we can check that font parameter.
1481
\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
1483
% Typeset a dimension, e.g., `in' or `pt'. The only reason for the
1484
% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
1486
\def\dmn#1{\thinspace #1}
1488
\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
1490
% @l was never documented to mean ``switch to the Lisp font'',
1491
% and it is not used as such in any manual I can find. We need it for
1492
% Polish suppressed-l. --karl, 22sep96.
1493
%\def\l#1{{\li #1}\null}
1495
% Explicit font changes: @r, @sc, undocumented @ii.
1496
\def\r#1{{\rm #1}} % roman font
1497
\def\sc#1{{\smallcaps#1}} % smallcaps font
1498
\def\ii#1{{\it #1}} % italic font
1500
% @acronym downcases the argument and prints in smallcaps.
1501
\def\acronym#1{{\smallcaps \lowercase{#1}}}
1503
% @pounds{} is a sterling sign.
1504
\def\pounds{{\it\$}}
1507
\message{page headings,}
1509
\newskip\titlepagetopglue \titlepagetopglue = 1.5in
1510
\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
1512
% First the title page. Must do @settitle before @titlepage.
1514
\newif\iffinishedtitlepage
1516
% Do an implicit @contents or @shortcontents after @end titlepage if the
1517
% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage.
1519
\newif\ifsetcontentsaftertitlepage
1520
\let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
1521
\newif\ifsetshortcontentsaftertitlepage
1522
\let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
1524
\def\shorttitlepage{\parsearg\shorttitlepagezzz}
1525
\def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
1526
\endgroup\page\hbox{}\page}
1528
\def\titlepage{\begingroup \parindent=0pt \textfonts
1529
\let\subtitlerm=\tenrm
1530
\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}%
1532
\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines}%
1534
% Leave some space at the very top of the page.
1535
\vglue\titlepagetopglue
1537
% Now you can print the title using @title.
1538
\def\title{\parsearg\titlezzz}%
1539
\def\titlezzz##1{\leftline{\titlefonts\rm ##1}
1540
% print a rule at the page bottom also.
1541
\finishedtitlepagefalse
1542
\vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
1543
% No rule at page bottom unless we print one at the top with @title.
1544
\finishedtitlepagetrue
1546
% Now you can put text using @subtitle.
1547
\def\subtitle{\parsearg\subtitlezzz}%
1548
\def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}%
1550
% @author should come last, but may come many times.
1551
\def\author{\parsearg\authorzzz}%
1552
\def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi
1553
{\authorfont \leftline{##1}}}%
1555
% Most title ``pages'' are actually two pages long, with space
1556
% at the top of the second. We don't want the ragged left on the second.
1557
\let\oldpage = \page
1559
\iffinishedtitlepage\else
1563
\let\page = \oldpage
1565
% \def\page{\oldpage \hbox{}}
1569
\iffinishedtitlepage\else
1572
% It is important to do the page break before ending the group,
1573
% because the headline and footline are only empty inside the group.
1574
% If we use the new definition of \page, we always get a blank page
1575
% after the title page, which we certainly don't want.
1579
% If they want short, they certainly want long too.
1580
\ifsetshortcontentsaftertitlepage
1583
\global\let\shortcontents = \relax
1584
\global\let\contents = \relax
1587
\ifsetcontentsaftertitlepage
1589
\global\let\contents = \relax
1590
\global\let\shortcontents = \relax
1593
\ifpdf \pdfmakepagedesttrue \fi
1598
\def\finishtitlepage{%
1599
\vskip4pt \hrule height 2pt width \hsize
1600
\vskip\titlepagebottomglue
1601
\finishedtitlepagetrue
1604
%%% Set up page headings and footings.
1606
\let\thispage=\folio
1608
\newtoks\evenheadline % headline on even pages
1609
\newtoks\oddheadline % headline on odd pages
1610
\newtoks\evenfootline % footline on even pages
1611
\newtoks\oddfootline % footline on odd pages
1613
% Now make Tex use those variables
1614
\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
1615
\else \the\evenheadline \fi}}
1616
\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
1617
\else \the\evenfootline \fi}\HEADINGShook}
1618
\let\HEADINGShook=\relax
1620
% Commands to set those variables.
1621
% For example, this is what @headings on does
1622
% @evenheading @thistitle|@thispage|@thischapter
1623
% @oddheading @thischapter|@thispage|@thistitle
1624
% @evenfooting @thisfile||
1625
% @oddfooting ||@thisfile
1627
\def\evenheading{\parsearg\evenheadingxxx}
1628
\def\oddheading{\parsearg\oddheadingxxx}
1629
\def\everyheading{\parsearg\everyheadingxxx}
1631
\def\evenfooting{\parsearg\evenfootingxxx}
1632
\def\oddfooting{\parsearg\oddfootingxxx}
1633
\def\everyfooting{\parsearg\everyfootingxxx}
1637
\gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish}
1638
\gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{%
1639
\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1641
\gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish}
1642
\gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{%
1643
\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1645
\gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
1647
\gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish}
1648
\gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{%
1649
\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1651
\gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish}
1652
\gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{%
1653
\global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
1655
% Leave some space for the footline. Hopefully ok to assume
1656
% @evenfooting will not be used by itself.
1657
\global\advance\pageheight by -\baselineskip
1658
\global\advance\vsize by -\baselineskip
1661
\gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}}
1663
}% unbind the catcode of @.
1665
% @headings double turns headings on for double-sided printing.
1666
% @headings single turns headings on for single-sided printing.
1667
% @headings off turns them off.
1668
% @headings on same as @headings double, retained for compatibility.
1669
% @headings after turns on double-sided headings after this page.
1670
% @headings doubleafter turns on double-sided headings after this page.
1671
% @headings singleafter turns on single-sided headings after this page.
1672
% By default, they are off at the start of a document,
1673
% and turned `on' after @end titlepage.
1675
\def\headings #1 {\csname HEADINGS#1\endcsname}
1678
\global\evenheadline={\hfil} \global\evenfootline={\hfil}
1679
\global\oddheadline={\hfil} \global\oddfootline={\hfil}}
1681
% When we turn headings on, set the page number to 1.
1682
% For double-sided printing, put current file name in lower left corner,
1683
% chapter name on inside top of right hand pages, document
1684
% title on inside top of left hand pages, and page numbers on outside top
1685
% edge of all pages.
1686
\def\HEADINGSdouble{
1688
\global\evenfootline={\hfil}
1689
\global\oddfootline={\hfil}
1690
\global\evenheadline={\line{\folio\hfil\thistitle}}
1691
\global\oddheadline={\line{\thischapter\hfil\folio}}
1692
\global\let\contentsalignmacro = \chapoddpage
1694
\let\contentsalignmacro = \chappager
1696
% For single-sided printing, chapter title goes across top left of page,
1697
% page number on top right.
1698
\def\HEADINGSsingle{
1700
\global\evenfootline={\hfil}
1701
\global\oddfootline={\hfil}
1702
\global\evenheadline={\line{\thischapter\hfil\folio}}
1703
\global\oddheadline={\line{\thischapter\hfil\folio}}
1704
\global\let\contentsalignmacro = \chappager
1706
\def\HEADINGSon{\HEADINGSdouble}
1708
\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
1709
\let\HEADINGSdoubleafter=\HEADINGSafter
1710
\def\HEADINGSdoublex{%
1711
\global\evenfootline={\hfil}
1712
\global\oddfootline={\hfil}
1713
\global\evenheadline={\line{\folio\hfil\thistitle}}
1714
\global\oddheadline={\line{\thischapter\hfil\folio}}
1715
\global\let\contentsalignmacro = \chapoddpage
1718
\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
1719
\def\HEADINGSsinglex{%
1720
\global\evenfootline={\hfil}
1721
\global\oddfootline={\hfil}
1722
\global\evenheadline={\line{\thischapter\hfil\folio}}
1723
\global\oddheadline={\line{\thischapter\hfil\folio}}
1724
\global\let\contentsalignmacro = \chappager
1727
% Subroutines used in generating headings
1728
% This produces Day Month Year style of output.
1729
% Only define if not already defined, in case a txi-??.tex file has set
1730
% up a different format (e.g., txi-cs.tex does this).
1731
\ifx\today\undefined
1735
\or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
1736
\or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
1737
\or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
1742
% @settitle line... specifies the title of the document, for headings.
1743
% It generates no output of its own.
1744
\def\thistitle{\putwordNoTitle}
1745
\def\settitle{\parsearg\settitlezzz}
1746
\def\settitlezzz #1{\gdef\thistitle{#1}}
1750
% Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x).
1752
% default indentation of table text
1753
\newdimen\tableindent \tableindent=.8in
1754
% default indentation of @itemize and @enumerate text
1755
\newdimen\itemindent \itemindent=.3in
1756
% margin between end of table item and start of table text.
1757
\newdimen\itemmargin \itemmargin=.1in
1759
% used internally for \itemindent minus \itemmargin
1762
% Note @table, @vtable, and @vtable define @item, @itemx, etc., with
1764
% They also define \itemindex
1765
% to index the item name in whatever manner is desired (perhaps none).
1767
\newif\ifitemxneedsnegativevskip
1769
\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
1771
\def\internalBitem{\smallbreak \parsearg\itemzzz}
1772
\def\internalBitemx{\itemxpar \parsearg\itemzzz}
1774
\def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz}
1775
\def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \itemxpar \parsearg\xitemzzz}
1777
\def\internalBkitem{\smallbreak \parsearg\kitemzzz}
1778
\def\internalBkitemx{\itemxpar \parsearg\kitemzzz}
1780
\def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}%
1783
\def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}%
1786
\def\itemzzz #1{\begingroup %
1787
\advance\hsize by -\rightskip
1788
\advance\hsize by -\tableindent
1789
\setbox0=\hbox{\itemfont{#1}}%
1791
\nobreak % This prevents a break before @itemx.
1793
% If the item text does not fit in the space we have, put it on a line
1794
% by itself, and do not allow a page break either before or after that
1795
% line. We do not start a paragraph here because then if the next
1796
% command is, e.g., @kindex, the whatsit would get put into the
1797
% horizontal list on a line by itself, resulting in extra blank space.
1798
\ifdim \wd0>\itemmax
1800
% Make this a paragraph so we get the \parskip glue and wrapping,
1801
% but leave it ragged-right.
1803
\advance\leftskip by-\tableindent
1804
\advance\hsize by\tableindent
1805
\advance\rightskip by0pt plus1fil
1806
\leavevmode\unhbox0\par
1809
% We're going to be starting a paragraph, but we don't want the
1810
% \parskip glue -- logically it's part of the @item we just started.
1811
\nobreak \vskip-\parskip
1813
% Stop a page break at the \parskip glue coming up. Unfortunately
1814
% we can't prevent a possible page break at the following
1815
% \baselineskip glue.
1818
\itemxneedsnegativevskipfalse
1820
% The item text fits into the space. Start a paragraph, so that the
1821
% following text (if any) will end up on the same line.
1823
% Do this with kerns and \unhbox so that if there is a footnote in
1824
% the item text, it can migrate to the main vertical list and
1825
% eventually be printed.
1826
\nobreak\kern-\tableindent
1827
\dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
1829
\nobreak\kern\dimen0
1831
\itemxneedsnegativevskiptrue
1835
\def\item{\errmessage{@item while not in a table}}
1836
\def\itemx{\errmessage{@itemx while not in a table}}
1837
\def\kitem{\errmessage{@kitem while not in a table}}
1838
\def\kitemx{\errmessage{@kitemx while not in a table}}
1839
\def\xitem{\errmessage{@xitem while not in a table}}
1840
\def\xitemx{\errmessage{@xitemx while not in a table}}
1842
% Contains a kludge to get @end[description] to work.
1843
\def\description{\tablez{\dontindex}{1}{}{}{}{}}
1845
% @table, @ftable, @vtable.
1846
\def\table{\begingroup\inENV\obeylines\obeyspaces\tablex}
1847
{\obeylines\obeyspaces%
1848
\gdef\tablex #1^^M{%
1849
\tabley\dontindex#1 \endtabley}}
1851
\def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex}
1852
{\obeylines\obeyspaces%
1853
\gdef\ftablex #1^^M{%
1854
\tabley\fnitemindex#1 \endtabley
1855
\def\Eftable{\endgraf\afterenvbreak\endgroup}%
1856
\let\Etable=\relax}}
1858
\def\vtable{\begingroup\inENV\obeylines\obeyspaces\vtablex}
1859
{\obeylines\obeyspaces%
1860
\gdef\vtablex #1^^M{%
1861
\tabley\vritemindex#1 \endtabley
1862
\def\Evtable{\endgraf\afterenvbreak\endgroup}%
1863
\let\Etable=\relax}}
1866
\def\fnitemindex #1{\doind {fn}{\code{#1}}}%
1867
\def\vritemindex #1{\doind {vr}{\code{#1}}}%
1870
\gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup%
1871
\tablez{#1}{#2}{#3}{#4}{#5}{#6}}}
1873
\def\tablez #1#2#3#4#5#6{%
1876
\def\Edescription{\Etable}% Necessary kludge.
1878
\ifnum 0#3>0 \advance \leftskip by #3\mil \fi %
1879
\ifnum 0#4>0 \tableindent=#4\mil \fi %
1880
\ifnum 0#5>0 \advance \rightskip by #5\mil \fi %
1882
\itemmax=\tableindent %
1883
\advance \itemmax by -\itemmargin %
1884
\advance \leftskip by \tableindent %
1885
\exdentamount=\tableindent
1887
\parskip = \smallskipamount
1888
\ifdim \parskip=0pt \parskip=2pt \fi%
1889
\def\Etable{\endgraf\afterenvbreak\endgroup}%
1890
\let\item = \internalBitem %
1891
\let\itemx = \internalBitemx %
1892
\let\kitem = \internalBkitem %
1893
\let\kitemx = \internalBkitemx %
1894
\let\xitem = \internalBxitem %
1895
\let\xitemx = \internalBxitemx %
1898
% This is the counter used by @enumerate, which is really @itemize
1902
\def\itemize{\parsearg\itemizezzz}
1904
\def\itemizezzz #1{%
1905
\begingroup % ended by the @end itemize
1906
\itemizey {#1}{\Eitemize}
1909
\def\itemizey #1#2{%
1911
\itemmax=\itemindent %
1912
\advance \itemmax by -\itemmargin %
1913
\advance \leftskip by \itemindent %
1914
\exdentamount=\itemindent
1916
\parskip = \smallskipamount %
1917
\ifdim \parskip=0pt \parskip=2pt \fi%
1918
\def#2{\endgraf\afterenvbreak\endgroup}%
1919
\def\itemcontents{#1}%
1920
\let\item=\itemizeitem}
1922
% Set sfcode to normal for the chars that usually have another value.
1923
% These are `.?!:;,'
1924
\def\frenchspacing{\sfcode46=1000 \sfcode63=1000 \sfcode33=1000
1925
\sfcode58=1000 \sfcode59=1000 \sfcode44=1000 }
1927
% \splitoff TOKENS\endmark defines \first to be the first token in
1928
% TOKENS, and \rest to be the remainder.
1930
\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
1932
% Allow an optional argument of an uppercase letter, lowercase letter,
1933
% or number, to specify the first label in the enumerated list. No
1934
% argument is the same as `1'.
1936
\def\enumerate{\parsearg\enumeratezzz}
1937
\def\enumeratezzz #1{\enumeratey #1 \endenumeratey}
1938
\def\enumeratey #1 #2\endenumeratey{%
1939
\begingroup % ended by the @end enumerate
1941
% If we were given no argument, pretend we were given `1'.
1943
\ifx\thearg\empty \def\thearg{1}\fi
1945
% Detect if the argument is a single token. If so, it might be a
1946
% letter. Otherwise, the only valid thing it can be is a number.
1947
% (We will always have one token, because of the test we just made.
1948
% This is a good thing, since \splitoff doesn't work given nothing at
1949
% all -- the first parameter is undelimited.)
1950
\expandafter\splitoff\thearg\endmark
1952
% Only one token in the argument. It could still be anything.
1953
% A ``lowercase letter'' is one whose \lccode is nonzero.
1954
% An ``uppercase letter'' is one whose \lccode is both nonzero, and
1955
% not equal to itself.
1956
% Otherwise, we assume it's a number.
1958
% We need the \relax at the end of the \ifnum lines to stop TeX from
1959
% continuing to look for a <number>.
1961
\ifnum\lccode\expandafter`\thearg=0\relax
1962
\numericenumerate % a number (we hope)
1965
\ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
1966
\lowercaseenumerate % lowercase letter
1968
\uppercaseenumerate % uppercase letter
1972
% Multiple tokens in the argument. We hope it's a number.
1977
% An @enumerate whose labels are integers. The starting integer is
1980
\def\numericenumerate{%
1982
\startenumeration{\the\itemno}%
1985
% The starting (lowercase) letter is in \thearg.
1986
\def\lowercaseenumerate{%
1987
\itemno = \expandafter`\thearg
1989
% Be sure we're not beyond the end of the alphabet.
1991
\errmessage{No more lowercase letters in @enumerate; get a bigger
1998
% The starting (uppercase) letter is in \thearg.
1999
\def\uppercaseenumerate{%
2000
\itemno = \expandafter`\thearg
2002
% Be sure we're not beyond the end of the alphabet.
2004
\errmessage{No more uppercase letters in @enumerate; get a bigger
2011
% Call itemizey, adding a period to the first argument and supplying the
2012
% common last two arguments. Also subtract one from the initial value in
2013
% \itemno, since @item increments \itemno.
2015
\def\startenumeration#1{%
2016
\advance\itemno by -1
2017
\itemizey{#1.}\Eenumerate\flushcr
2020
% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
2023
\def\alphaenumerate{\enumerate{a}}
2024
\def\capsenumerate{\enumerate{A}}
2025
\def\Ealphaenumerate{\Eenumerate}
2026
\def\Ecapsenumerate{\Eenumerate}
2028
% Definition of @item while inside @itemize.
2031
\advance\itemno by 1
2032
{\let\par=\endgraf \smallbreak}%
2033
\ifhmode \errmessage{In hmode at itemizeitem}\fi
2034
{\parskip=0in \hskip 0pt
2035
\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}%
2036
\vadjust{\penalty 1200}}%
2039
% @multitable macros
2040
% Amy Hendrickson, 8/18/94, 3/6/96
2042
% @multitable ... @end multitable will make as many columns as desired.
2043
% Contents of each column will wrap at width given in preamble. Width
2044
% can be specified either with sample text given in a template line,
2045
% or in percent of \hsize, the current width of text on page.
2047
% Table can continue over pages but will only break between lines.
2051
% Either define widths of columns in terms of percent of \hsize:
2052
% @multitable @columnfractions .25 .3 .45
2055
% Numbers following @columnfractions are the percent of the total
2056
% current hsize to be used for each column. You may use as many
2057
% columns as desired.
2060
% Or use a template:
2061
% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
2063
% using the widest term desired in each column.
2065
% For those who want to use more than one line's worth of words in
2066
% the preamble, break the line within one argument and it
2067
% will parse correctly, i.e.,
2069
% @multitable {Column 1 template} {Column 2 template} {Column 3
2072
% @multitable {Column 1 template} {Column 2 template}
2073
% {Column 3 template}
2075
% Each new table line starts with @item, each subsequent new column
2076
% starts with @tab. Empty columns may be produced by supplying @tab's
2077
% with nothing between them for as many times as empty columns are needed,
2078
% ie, @tab@tab@tab will produce two empty columns.
2080
% @item, @tab, @multitable or @end multitable do not need to be on their
2081
% own lines, but it will not hurt if they are.
2083
% Sample multitable:
2085
% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
2086
% @item first col stuff @tab second col stuff @tab third col
2093
% @item first col stuff @tab second col stuff
2094
% @tab Many paragraphs of text may be used in any column.
2096
% They will wrap at the width determined by the template.
2097
% @item@tab@tab This will be in third column.
2100
% Default dimensions may be reset by user.
2101
% @multitableparskip is vertical space between paragraphs in table.
2102
% @multitableparindent is paragraph indent in table.
2103
% @multitablecolmargin is horizontal space to be left between columns.
2104
% @multitablelinespace is space to leave between table items, baseline
2106
% 0pt means it depends on current normal line spacing.
2108
\newskip\multitableparskip
2109
\newskip\multitableparindent
2110
\newdimen\multitablecolspace
2111
\newskip\multitablelinespace
2112
\multitableparskip=0pt
2113
\multitableparindent=6pt
2114
\multitablecolspace=12pt
2115
\multitablelinespace=0pt
2117
% Macros used to set up halign preamble:
2119
\let\endsetuptable\relax
2120
\def\xendsetuptable{\endsetuptable}
2121
\let\columnfractions\relax
2122
\def\xcolumnfractions{\columnfractions}
2125
% #1 is the part of the @columnfraction before the decimal point, which
2126
% is presumably either 0 or the empty string (but we don't check, we
2127
% just throw it away). #2 is the decimal part, which we use as the
2128
% percent of \hsize for this column.
2129
\def\pickupwholefraction#1.#2 {%
2130
\global\advance\colcount by 1
2131
\expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}%
2138
\ifx\firstarg\xendsetuptable
2141
\ifx\firstarg\xcolumnfractions
2142
\global\setpercenttrue
2145
\let\go\pickupwholefraction
2147
\global\advance\colcount by 1
2148
\setbox0=\hbox{#1\unskip }% Add a normal word space as a separator;
2149
% typically that is always in the input, anyway.
2150
\expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
2153
\ifx\go\pickupwholefraction
2154
% Put the argument back for the \pickupwholefraction call, so
2155
% we'll always have a period there to be parsed.
2156
\def\go{\pickupwholefraction#1}%
2158
\let\go = \setuptable
2164
% This used to have \hskip1sp. But then the space in a template line is
2165
% not enough. That is bad. So let's go back to just & until we
2166
% encounter the problem it was intended to solve again.
2167
% --karl, nathan@acm.org, 20apr99.
2170
% @multitable ... @end multitable definitions:
2172
\def\multitable{\parsearg\dotable}
2173
\def\dotable#1{\bgroup
2178
\setmultitablespacing
2179
\parskip=\multitableparskip
2180
\parindent=\multitableparindent
2183
\def\Emultitable{\global\setpercentfalse\cr\egroup\egroup}%
2185
% To parse everything between @multitable and @item:
2186
\setuptable#1 \endsetuptable
2188
% \everycr will reset column counter, \colcount, at the end of
2189
% each line. Every column entry will cause \colcount to advance by one.
2190
% The table preamble
2191
% looks at the current \colcount to find the correct column width.
2194
% \filbreak%% keeps underfull box messages off when table breaks over pages.
2195
% Maybe so, but it also creates really weird page breaks when the table
2196
% breaks over pages. Wouldn't \vfil be better? Wait until the problem
2197
% manifests itself, so it can be fixed for real --karl.
2198
\global\colcount=0\relax}}%
2200
% This preamble sets up a generic column definition, which will
2201
% be used as many times as user calls for columns.
2202
% \vtop will set a single line and will also let text wrap and
2203
% continue for many paragraphs if desired.
2204
\halign\bgroup&\global\advance\colcount by 1\relax
2205
\multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
2207
% In order to keep entries from bumping into each other
2208
% we will add a \leftskip of \multitablecolspace to all columns after
2211
% If a template has been used, we will add \multitablecolspace
2212
% to the width of each template entry.
2214
% If the user has set preamble in terms of percent of \hsize we will
2215
% use that dimension as the width of the column, and the \leftskip
2216
% will keep entries from bumping into each other. Table will start at
2217
% left margin and final column will justify at right margin.
2219
% Make sure we don't inherit \rightskip from the outer environment.
2222
% The first column will be indented with the surrounding text.
2223
\advance\hsize by\leftskip
2226
% If user has not set preamble in terms of percent of \hsize
2227
% we will advance \hsize by \multitablecolspace.
2228
\advance\hsize by \multitablecolspace
2230
% In either case we will make \leftskip=\multitablecolspace:
2231
\leftskip=\multitablecolspace
2233
% Ignoring space at the beginning and end avoids an occasional spurious
2234
% blank line, when TeX decides to break the line at the space before the
2235
% box from the multistrut, so the strut ends up on a line by itself.
2237
% @multitable @columnfractions .11 .89
2239
% @tab Legal holiday which is valid in major parts of the whole country.
2240
% Is automatically provided with highlighting sequences respectively marking
2242
\noindent\ignorespaces##\unskip\multistrut}\cr
2245
\def\setmultitablespacing{% test to see if user has set \multitablelinespace.
2246
% If so, do nothing. If not, give it an appropriate dimension based on
2247
% current baselineskip.
2248
\ifdim\multitablelinespace=0pt
2249
\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
2250
\global\advance\multitablelinespace by-\ht0
2251
%% strut to put in table in case some entry doesn't have descenders,
2252
%% to keep lines equally spaced
2253
\let\multistrut = \strut
2255
%% FIXME: what is \box0 supposed to be?
2256
\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
2258
%% Test to see if parskip is larger than space between lines of
2259
%% table. If not, do nothing.
2260
%% If so, set to same dimension as multitablelinespace.
2261
\ifdim\multitableparskip>\multitablelinespace
2262
\global\multitableparskip=\multitablelinespace
2263
\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
2264
%% than skip between lines in the table.
2266
\ifdim\multitableparskip=0pt
2267
\global\multitableparskip=\multitablelinespace
2268
\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
2269
%% than skip between lines in the table.
2273
\message{conditionals,}
2274
% Prevent errors for section commands.
2275
% Used in @ignore and in failing conditionals.
2276
\def\ignoresections{%
2278
\let\unnumbered=\relax
2280
\let\unnumberedsec=\relax
2281
\let\unnumberedsection=\relax
2282
\let\unnumberedsubsec=\relax
2283
\let\unnumberedsubsection=\relax
2284
\let\unnumberedsubsubsec=\relax
2285
\let\unnumberedsubsubsection=\relax
2288
\let\subsubsec=\relax
2289
\let\subsection=\relax
2290
\let\subsubsection=\relax
2291
\let\appendix=\relax
2292
\let\appendixsec=\relax
2293
\let\appendixsection=\relax
2294
\let\appendixsubsec=\relax
2295
\let\appendixsubsection=\relax
2296
\let\appendixsubsubsec=\relax
2297
\let\appendixsubsubsection=\relax
2298
\let\contents=\relax
2299
\let\smallbook=\relax
2300
\let\titlepage=\relax
2303
% Used in nested conditionals, where we have to parse the Texinfo source
2304
% and so want to turn off most commands, in case they are used
2307
\def\ignoremorecommands{%
2308
\let\defcodeindex = \relax
2311
\let\deffnx = \relax
2312
\let\defindex = \relax
2313
\let\defivar = \relax
2314
\let\defmac = \relax
2315
\let\defmethod = \relax
2317
\let\defopt = \relax
2318
\let\defspec = \relax
2320
\let\deftypefn = \relax
2321
\let\deftypefun = \relax
2322
\let\deftypeivar = \relax
2323
\let\deftypeop = \relax
2324
\let\deftypevar = \relax
2325
\let\deftypevr = \relax
2327
\let\defvar = \relax
2331
\let\printindex = \relax
2333
\let\settitle = \relax
2334
\let\setchapternewpage = \relax
2335
\let\setchapterstyle = \relax
2336
\let\everyheading = \relax
2337
\let\evenheading = \relax
2338
\let\oddheading = \relax
2339
\let\everyfooting = \relax
2340
\let\evenfooting = \relax
2341
\let\oddfooting = \relax
2342
\let\headings = \relax
2343
\let\include = \relax
2344
\let\lowersections = \relax
2346
\let\raisesections = \relax
2353
% Ignore @ignore ... @end ignore.
2355
\def\ignore{\doignore{ignore}}
2357
% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text.
2359
\def\ifinfo{\doignore{ifinfo}}
2360
\def\ifhtml{\doignore{ifhtml}}
2361
\def\ifnottex{\doignore{ifnottex}}
2362
\def\html{\doignore{html}}
2363
\def\menu{\doignore{menu}}
2364
\def\direntry{\doignore{direntry}}
2366
% @dircategory CATEGORY -- specify a category of the dir file
2367
% which this file should belong to. Ignore this in TeX.
2368
\let\dircategory = \comment
2370
% Ignore text until a line `@end #1'.
2372
\def\doignore#1{\begingroup
2373
% Don't complain about control sequences we have declared \outer.
2376
% Define a command to swallow text until we reach `@end #1'.
2377
% This @ is a catcode 12 token (that is the normal catcode of @ in
2378
% this texinfo.tex file). We change the catcode of @ below to match.
2379
\long\def\doignoretext##1@end #1{\enddoignore}%
2381
% Make sure that spaces turn into tokens that match what \doignoretext wants.
2384
% Ignore braces, too, so mismatched braces don't cause trouble.
2388
% We must not have @c interpreted as a control sequence.
2391
% Make the letter c a comment character so that the rest of the line
2392
% will be ignored. This way, the document can have (for example)
2394
% and the @end ifinfo will be properly ignored.
2395
% (We've just changed @ to catcode 12.)
2398
% And now expand that command.
2402
% What we do to finish off ignored text.
2404
\def\enddoignore{\endgroup\ignorespaces}%
2406
\newif\ifwarnedobs\warnedobsfalse
2408
\ifwarnedobs\relax\else
2409
% We need to warn folks that they may have trouble with TeX 3.0.
2410
% This uses \immediate\write16 rather than \message to get newlines.
2411
\immediate\write16{}
2412
\immediate\write16{WARNING: for users of Unix TeX 3.0!}
2413
\immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).}
2414
\immediate\write16{If you are running another version of TeX, relax.}
2415
\immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.}
2416
\immediate\write16{ Then upgrade your TeX installation if you can.}
2417
\immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)}
2418
\immediate\write16{If you are stuck with version 3.0, run the}
2419
\immediate\write16{ script ``tex3patch'' from the Texinfo distribution}
2420
\immediate\write16{ to use a workaround.}
2421
\immediate\write16{}
2422
\global\warnedobstrue
2426
% **In TeX 3.0, setting text in \nullfont hangs tex. For a
2427
% workaround (which requires the file ``dummy.tfm'' to be installed),
2428
% uncomment the following line:
2429
%%%%%\font\nullfont=dummy\let\obstexwarn=\relax
2431
% Ignore text, except that we keep track of conditional commands for
2432
% purposes of nesting, up to an `@end #1' command.
2434
\def\nestedignore#1{%
2436
% We must actually expand the ignored text to look for the @end
2437
% command, so that nested ignore constructs work. Thus, we put the
2438
% text into a \vbox and then do nothing with the result. To minimize
2439
% the change of memory overflow, we follow the approach outlined on
2440
% page 401 of the TeXbook: make the current font be a dummy font.
2442
\setbox0 = \vbox\bgroup
2443
% Don't complain about control sequences we have declared \outer.
2446
% Define `@end #1' to end the box, which will in turn undefine the
2447
% @end command again.
2448
\expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}%
2450
% We are going to be parsing Texinfo commands. Most cause no
2451
% trouble when they are used incorrectly, but some commands do
2452
% complicated argument parsing or otherwise get confused, so we
2455
% We can't do anything about stray @-signs, unfortunately;
2456
% they'll produce `undefined control sequence' errors.
2459
% Set the current font to be \nullfont, a TeX primitive, and define
2460
% all the font commands to also use \nullfont. We don't use
2461
% dummy.tfm, as suggested in the TeXbook, because not all sites
2462
% might have that installed. Therefore, math mode will still
2463
% produce output, but that should be an extremely small amount of
2464
% stuff compared to the main input.
2467
\let\tenrm=\nullfont \let\tenit=\nullfont \let\tensl=\nullfont
2468
\let\tenbf=\nullfont \let\tentt=\nullfont \let\smallcaps=\nullfont
2469
\let\tensf=\nullfont
2470
% Similarly for index fonts (mostly for their use in smallexample).
2471
\let\smallrm=\nullfont \let\smallit=\nullfont \let\smallsl=\nullfont
2472
\let\smallbf=\nullfont \let\smalltt=\nullfont \let\smallsc=\nullfont
2473
\let\smallsf=\nullfont
2475
% Don't complain when characters are missing from the fonts.
2476
\tracinglostchars = 0
2478
% Don't bother to do space factor calculations.
2481
% Don't report underfull hboxes.
2484
% Do minimal line-breaking.
2485
\pretolerance = 10000
2487
% Do not execute instructions in @tex
2488
\def\tex{\doignore{tex}}%
2489
% Do not execute macro definitions.
2490
% `c' is a comment character, so the word `macro' will get cut off.
2491
\def\macro{\doignore{ma}}%
2494
% @set VAR sets the variable VAR to an empty value.
2495
% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
2497
% Since we want to separate VAR from REST-OF-LINE (which might be
2498
% empty), we can't just use \parsearg; we have to insert a space of our
2499
% own to delimit the rest of the line, and then take it out again if we
2500
% didn't need it. Make sure the catcode of space is correct to avoid
2501
% losing inside @example, for instance.
2503
\def\set{\begingroup\catcode` =10
2504
\catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
2506
\def\setxxx#1{\setyyy#1 \endsetyyy}
2507
\def\setyyy#1 #2\endsetyyy{%
2509
\ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
2510
\else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
2514
% Can't use \xdef to pre-expand #2 and save some time, since \temp or
2515
% \next or other control sequences that we've defined might get us into
2516
% an infinite loop. Consider `@set foo @cite{bar}'.
2517
\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
2519
% @clear VAR clears (i.e., unsets) the variable VAR.
2521
\def\clear{\parsearg\clearxxx}
2522
\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
2524
% @value{foo} gets the text saved in variable foo.
2526
\catcode`\_ = \active
2528
% We might end up with active _ or - characters in the argument if
2529
% we're called from @code, as @code{@value{foo-bar_}}. So \let any
2530
% such active characters to their normal equivalents.
2531
\gdef\value{\begingroup
2532
\catcode`\-=12 \catcode`\_=12
2533
\indexbreaks \let_\normalunderscore
2536
\def\valuexxx#1{\expandablevalue{#1}\endgroup}
2538
% We have this subroutine so that we can handle at least some @value's
2539
% properly in indexes (we \let\value to this in \indexdummies). Ones
2540
% whose names contain - or _ still won't work, but we can't do anything
2541
% about that. The command has to be fully expandable, since the result
2542
% winds up in the index file. This means that if the variable's value
2543
% contains other Texinfo commands, it's almost certain it will fail
2544
% (although perhaps we could fix that with sufficient work to do a
2545
% one-level expansion on the result, instead of complete).
2547
\def\expandablevalue#1{%
2548
\expandafter\ifx\csname SET#1\endcsname\relax
2549
{[No value for ``#1'']}%
2551
\csname SET#1\endcsname
2555
% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
2558
\def\ifset{\parsearg\ifsetxxx}
2560
\expandafter\ifx\csname SET#1\endcsname\relax
2561
\expandafter\ifsetfail
2563
\expandafter\ifsetsucceed
2566
\def\ifsetsucceed{\conditionalsucceed{ifset}}
2567
\def\ifsetfail{\nestedignore{ifset}}
2568
\defineunmatchedend{ifset}
2570
% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
2571
% defined with @set, or has been undefined with @clear.
2573
\def\ifclear{\parsearg\ifclearxxx}
2574
\def\ifclearxxx #1{%
2575
\expandafter\ifx\csname SET#1\endcsname\relax
2576
\expandafter\ifclearsucceed
2578
\expandafter\ifclearfail
2581
\def\ifclearsucceed{\conditionalsucceed{ifclear}}
2582
\def\ifclearfail{\nestedignore{ifclear}}
2583
\defineunmatchedend{ifclear}
2585
% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text
2586
% following, through the first @end iftex (etc.). Make `@end iftex'
2587
% (etc.) valid only after an @iftex.
2589
\def\iftex{\conditionalsucceed{iftex}}
2590
\def\ifnothtml{\conditionalsucceed{ifnothtml}}
2591
\def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
2592
\defineunmatchedend{iftex}
2593
\defineunmatchedend{ifnothtml}
2594
\defineunmatchedend{ifnotinfo}
2596
% We can't just want to start a group at @iftex (for example) and end it
2597
% at @end iftex, since then @set commands inside the conditional have no
2598
% effect (they'd get reverted at the end of the group). So we must
2599
% define \Eiftex to redefine itself to be its previous value. (We can't
2600
% just define it to fail again with an ``unmatched end'' error, since
2601
% the @ifset might be nested.)
2603
\def\conditionalsucceed#1{%
2605
% Remember the current value of \E#1.
2606
\let\nece{prevE#1} = \nece{E#1}%
2608
% At the `@end #1', redefine \E#1 to be its previous value.
2609
\def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}%
2614
% We need to expand lots of \csname's, but we don't want to expand the
2615
% control sequences after we've constructed them.
2617
\def\nece#1{\expandafter\noexpand\csname#1\endcsname}
2619
% @defininfoenclose.
2620
\let\definfoenclose=\comment
2624
% Index generation facilities
2626
% Define \newwrite to be identical to plain tex's \newwrite
2627
% except not \outer, so it can be used within \newindex.
2629
\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}}
2631
% \newindex {foo} defines an index named foo.
2632
% It automatically defines \fooindex such that
2633
% \fooindex ...rest of line... puts an entry in the index foo.
2634
% It also defines \fooindfile to be the number of the output channel for
2635
% the file that accumulates this index. The file's extension is foo.
2636
% The name of an index should be no more than 2 characters long
2637
% for the sake of vms.
2641
\expandafter\newwrite \csname#1indfile\endcsname
2642
\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
2644
\expandafter\xdef\csname#1index\endcsname{% % Define @#1index
2645
\noexpand\doindex{#1}}
2648
% @defindex foo == \newindex{foo}
2650
\def\defindex{\parsearg\newindex}
2652
% Define @defcodeindex, like @defindex except put all entries in @code.
2654
\def\defcodeindex{\parsearg\newcodeindex}
2656
\def\newcodeindex#1{%
2658
\expandafter\newwrite \csname#1indfile\endcsname
2659
\openout \csname#1indfile\endcsname \jobname.#1
2661
\expandafter\xdef\csname#1index\endcsname{%
2662
\noexpand\docodeindex{#1}}%
2666
% @synindex foo bar makes index foo feed into index bar.
2667
% Do this instead of @defindex foo if you don't want it as a separate index.
2669
% @syncodeindex foo bar similar, but put all entries made for index foo
2672
\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
2673
\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
2675
% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
2676
% #3 the target index (bar).
2677
\def\dosynindex#1#2#3{%
2678
% Only do \closeout if we haven't already done it, else we'll end up
2679
% closing the target index.
2680
\expandafter \ifx\csname donesynindex#2\endcsname \undefined
2681
% The \closeout helps reduce unnecessary open files; the limit on the
2682
% Acorn RISC OS is a mere 16 files.
2683
\expandafter\closeout\csname#2indfile\endcsname
2684
\expandafter\let\csname\donesynindex#2\endcsname = 1
2686
% redefine \fooindfile:
2687
\expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
2688
\expandafter\let\csname#2indfile\endcsname=\temp
2689
% redefine \fooindex:
2690
\expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
2693
% Define \doindex, the driver for all \fooindex macros.
2694
% Argument #1 is generated by the calling \fooindex macro,
2695
% and it is "foo", the name of the index.
2697
% \doindex just uses \parsearg; it calls \doind for the actual work.
2698
% This is because \doind is more useful to call from other macros.
2700
% There is also \dosubind {index}{topic}{subtopic}
2701
% which makes an entry in a two-level index such as the operation index.
2703
\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
2704
\def\singleindexer #1{\doind{\indexname}{#1}}
2706
% like the previous two, but they put @code around the argument.
2707
\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
2708
\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
2712
% Take care of the plain tex accent commands.
2713
\def\"{\realbackslash "}%
2714
\def\`{\realbackslash `}%
2715
\def\'{\realbackslash '}%
2716
\def\^{\realbackslash ^}%
2717
\def\~{\realbackslash ~}%
2718
\def\={\realbackslash =}%
2719
\def\b{\realbackslash b}%
2720
\def\c{\realbackslash c}%
2721
\def\d{\realbackslash d}%
2722
\def\u{\realbackslash u}%
2723
\def\v{\realbackslash v}%
2724
\def\H{\realbackslash H}%
2725
% Take care of the plain tex special European modified letters.
2726
\def\oe{\realbackslash oe}%
2727
\def\ae{\realbackslash ae}%
2728
\def\aa{\realbackslash aa}%
2729
\def\OE{\realbackslash OE}%
2730
\def\AE{\realbackslash AE}%
2731
\def\AA{\realbackslash AA}%
2732
\def\o{\realbackslash o}%
2733
\def\O{\realbackslash O}%
2734
\def\l{\realbackslash l}%
2735
\def\L{\realbackslash L}%
2736
\def\ss{\realbackslash ss}%
2737
% Take care of texinfo commands likely to appear in an index entry.
2738
% (Must be a way to avoid doing expansion at all, and thus not have to
2739
% laboriously list every single command here.)
2740
\def\@{@}% will be @@ when we switch to @ as escape char.
2741
% Need these in case \tex is in effect and \{ is a \delimiter again.
2742
% But can't use \lbracecmd and \rbracecmd because texindex assumes
2743
% braces and backslashes are used only as delimiters.
2746
\def\_{{\realbackslash _}}%
2747
\def\w{\realbackslash w }%
2748
\def\bf{\realbackslash bf }%
2749
%\def\rm{\realbackslash rm }%
2750
\def\sl{\realbackslash sl }%
2751
\def\sf{\realbackslash sf}%
2752
\def\tt{\realbackslash tt}%
2753
\def\gtr{\realbackslash gtr}%
2754
\def\less{\realbackslash less}%
2755
\def\hat{\realbackslash hat}%
2756
\def\TeX{\realbackslash TeX}%
2757
\def\dots{\realbackslash dots }%
2758
\def\result{\realbackslash result}%
2759
\def\equiv{\realbackslash equiv}%
2760
\def\expansion{\realbackslash expansion}%
2761
\def\print{\realbackslash print}%
2762
\def\error{\realbackslash error}%
2763
\def\point{\realbackslash point}%
2764
\def\copyright{\realbackslash copyright}%
2765
\def\tclose##1{\realbackslash tclose {##1}}%
2766
\def\code##1{\realbackslash code {##1}}%
2767
\def\uref##1{\realbackslash uref {##1}}%
2768
\def\url##1{\realbackslash url {##1}}%
2769
\def\env##1{\realbackslash env {##1}}%
2770
\def\command##1{\realbackslash command {##1}}%
2771
\def\option##1{\realbackslash option {##1}}%
2772
\def\dotless##1{\realbackslash dotless {##1}}%
2773
\def\samp##1{\realbackslash samp {##1}}%
2774
\def\,##1{\realbackslash ,{##1}}%
2775
\def\t##1{\realbackslash t {##1}}%
2776
\def\r##1{\realbackslash r {##1}}%
2777
\def\i##1{\realbackslash i {##1}}%
2778
\def\b##1{\realbackslash b {##1}}%
2779
\def\sc##1{\realbackslash sc {##1}}%
2780
\def\cite##1{\realbackslash cite {##1}}%
2781
\def\key##1{\realbackslash key {##1}}%
2782
\def\file##1{\realbackslash file {##1}}%
2783
\def\var##1{\realbackslash var {##1}}%
2784
\def\kbd##1{\realbackslash kbd {##1}}%
2785
\def\dfn##1{\realbackslash dfn {##1}}%
2786
\def\emph##1{\realbackslash emph {##1}}%
2787
\def\acronym##1{\realbackslash acronym {##1}}%
2789
% Handle some cases of @value -- where the variable name does not
2790
% contain - or _, and the value does not contain any
2791
% (non-fully-expandable) commands.
2792
\let\value = \expandablevalue
2795
% Turn off macro expansion
2799
% If an index command is used in an @example environment, any spaces
2800
% therein should become regular spaces in the raw index file, not the
2801
% expansion of \tie (\\leavevmode \penalty \@M \ ).
2803
\gdef\unsepspaces{\obeyspaces\let =\space}}
2805
% \indexnofonts no-ops all font-change commands.
2806
% This is used when outputting the strings to sort the index by.
2807
\def\indexdummyfont#1{#1}
2808
\def\indexdummytex{TeX}
2809
\def\indexdummydots{...}
2812
% Just ignore accents.
2813
\let\,=\indexdummyfont
2814
\let\"=\indexdummyfont
2815
\let\`=\indexdummyfont
2816
\let\'=\indexdummyfont
2817
\let\^=\indexdummyfont
2818
\let\~=\indexdummyfont
2819
\let\==\indexdummyfont
2820
\let\b=\indexdummyfont
2821
\let\c=\indexdummyfont
2822
\let\d=\indexdummyfont
2823
\let\u=\indexdummyfont
2824
\let\v=\indexdummyfont
2825
\let\H=\indexdummyfont
2826
\let\dotless=\indexdummyfont
2827
% Take care of the plain tex special European modified letters.
2839
\let\w=\indexdummyfont
2840
\let\t=\indexdummyfont
2841
\let\r=\indexdummyfont
2842
\let\i=\indexdummyfont
2843
\let\b=\indexdummyfont
2844
\let\emph=\indexdummyfont
2845
\let\strong=\indexdummyfont
2846
\let\cite=\indexdummyfont
2847
\let\sc=\indexdummyfont
2848
%Don't no-op \tt, since it isn't a user-level command
2849
% and is used in the definitions of the active chars like <, >, |...
2850
%\let\tt=\indexdummyfont
2851
\let\tclose=\indexdummyfont
2852
\let\code=\indexdummyfont
2853
\let\url=\indexdummyfont
2854
\let\uref=\indexdummyfont
2855
\let\env=\indexdummyfont
2856
\let\acronym=\indexdummyfont
2857
\let\command=\indexdummyfont
2858
\let\option=\indexdummyfont
2859
\let\file=\indexdummyfont
2860
\let\samp=\indexdummyfont
2861
\let\kbd=\indexdummyfont
2862
\let\key=\indexdummyfont
2863
\let\var=\indexdummyfont
2864
\let\TeX=\indexdummytex
2865
\let\dots=\indexdummydots
2869
% To define \realbackslash, we must make \ not be an escape.
2870
% We must first make another character (@) an escape
2871
% so we do not become unable to do a definition.
2873
{\catcode`\@=0 \catcode`\\=\other
2874
@gdef@realbackslash{\}}
2876
\let\indexbackslash=0 %overridden during \printindex.
2877
\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
2879
% For \ifx comparisons.
2880
\def\emptymacro{\empty}
2882
% Most index entries go through here, but \dosubind is the general case.
2884
\def\doind#1#2{\dosubind{#1}{#2}\empty}
2886
% Workhorse for all \fooindexes.
2887
% #1 is name of index, #2 is stuff to put there, #3 is subentry --
2888
% \empty if called from \doind, as we usually are. The main exception
2889
% is with defuns, which call us directly.
2891
\def\dosubind#1#2#3{%
2892
% Put the index entry in the margin if desired.
2893
\ifx\SETmarginindex\relax\else
2894
\insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}%
2897
\count255=\lastpenalty
2899
\indexdummies % Must do this here, since \bf, etc expand at this stage
2902
\let\folio = 0% We will expand all macros now EXCEPT \folio.
2903
\def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
2904
% so it will be output as is; and it will print as backslash.
2908
% If third arg is present, precede it with space in sort key.
2909
\ifx\thirdarg\emptymacro
2910
\let\subentry = \empty
2915
% First process the index entry with all font commands turned
2916
% off to get the string to sort by.
2917
{\indexnofonts \xdef\indexsorttmp{#2\subentry}}%
2919
% Now the real index entry with the fonts.
2922
% If the third (subentry) arg is present, add it to the index
2924
\ifx\thirdarg\emptymacro \else
2925
\toks0 = \expandafter{\the\toks0{#3}}%
2928
% Set up the complete index entry, with both the sort key and
2929
% the original text, including any font commands. We write
2930
% three arguments to \entry to the .?? file (four in the
2931
% subentry case), texindex reduces to two when writing the .??s
2934
\write\csname#1indfile\endcsname{%
2935
\realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}%
2938
% If a skip is the last thing on the list now, preserve it
2939
% by backing up by \lastskip, doing the \write, then inserting
2940
% the skip again. Otherwise, the whatsit generated by the
2941
% \write will make \lastskip zero. The result is that sequences
2946
% will have extra space inserted, because the \medbreak in the
2947
% start of the @defun won't see the skip inserted by the @end of
2948
% the previous defun.
2950
% But don't do any of this if we're not in vertical mode. We
2951
% don't want to do a \vskip and prematurely end a paragraph.
2953
% Avoid page breaks due to these extra skips, too.
2958
\ifdim\lastskip = 0pt \else \nobreak\vskip-\lastskip \fi
2961
\temp % do the write
2964
\ifvmode \ifdim\skip0 = 0pt \else \nobreak\vskip\skip0 \fi \fi
2972
% The index entry written in the file actually looks like
2973
% \entry {sortstring}{page}{topic}
2975
% \entry {sortstring}{page}{topic}{subtopic}
2976
% The texindex program reads in these files and writes files
2977
% containing these kinds of lines:
2979
% before the first topic whose initial is c
2980
% \entry {topic}{pagelist}
2981
% for a topic that is used without subtopics
2983
% for the beginning of a topic that is used with subtopics
2984
% \secondary {subtopic}{pagelist}
2985
% for each subtopic.
2987
% Define the user-accessible indexing commands
2988
% @findex, @vindex, @kindex, @cindex.
2990
\def\findex {\fnindex}
2991
\def\kindex {\kyindex}
2992
\def\cindex {\cpindex}
2993
\def\vindex {\vrindex}
2994
\def\tindex {\tpindex}
2995
\def\pindex {\pgindex}
2997
\def\cindexsub {\begingroup\obeylines\cindexsub}
2999
\gdef\cindexsub "#1" #2^^M{\endgroup %
3000
\dosubind{cp}{#2}{#1}}}
3002
% Define the macros used in formatting output of the sorted index material.
3004
% @printindex causes a particular index (the ??s file) to get printed.
3005
% It does not print any chapter heading (usually an @unnumbered).
3007
\def\printindex{\parsearg\doprintindex}
3008
\def\doprintindex#1{\begingroup
3009
\dobreak \chapheadingskip{10000}%
3015
% See if the index file exists and is nonempty.
3016
% Change catcode of @ here so that if the index file contains
3018
% as its first line, TeX doesn't complain about mismatched braces
3019
% (because it thinks @} is a control sequence).
3021
\openin 1 \jobname.#1s
3023
% \enddoublecolumns gets confused if there is no text in the index,
3024
% and it loses the chapter title and the aux file entries for the
3025
% index. The easiest way to prevent this problem is to make sure
3026
% there is some text.
3027
\putwordIndexNonexistent
3030
% If the index file exists but is empty, then \openin leaves \ifeof
3031
% false. We have to make TeX try to read something from the file, so
3032
% it can discover if there is anything in it.
3035
\putwordIndexIsEmpty
3037
% Index files are almost Texinfo source, but we use \ as the escape
3038
% character. It would be better to use @, but that's too big a change
3039
% to make right now.
3040
\def\indexbackslash{\rawbackslashxx}%
3051
% These macros are used by the sorted index file itself.
3052
% Change them to control the appearance of the index.
3055
% Some minor font changes for the special characters.
3056
\let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
3058
% Remove any glue we may have, we'll be inserting our own.
3061
% We like breaks before the index initials, so insert a bonus.
3064
% Typeset the initial. Making this add up to a whole number of
3065
% baselineskips increases the chance of the dots lining up from column
3066
% to column. It still won't often be perfect, because of the stretch
3067
% we need before each entry, but it's better.
3069
% No shrink because it confuses \balancecolumns.
3070
\vskip 1.67\baselineskip plus .5\baselineskip
3071
\leftline{\secbf #1}%
3072
\vskip .33\baselineskip plus .1\baselineskip
3074
% Do our best not to break after the initial.
3078
% This typesets a paragraph consisting of #1, dot leaders, and then #2
3079
% flush to the right margin. It is used for index and table of contents
3080
% entries. The paragraph is indented by \leftskip.
3082
\def\entry#1#2{\begingroup
3084
% Start a new paragraph if necessary, so our assignments below can't
3085
% affect previous text.
3088
% Do not fill out the last line with white space.
3091
% No extra space above this paragraph.
3094
% Do not prefer a separate line ending with a hyphen to fewer lines.
3095
\finalhyphendemerits = 0
3097
% \hangindent is only relevant when the entry text and page number
3098
% don't both fit on one line. In that case, bob suggests starting the
3099
% dots pretty far over on the line. Unfortunately, a large
3100
% indentation looks wrong when the entry text itself is broken across
3101
% lines. So we use a small indentation and put up with long leaders.
3103
% \hangafter is reset to 1 (which is the value we want) at the start
3104
% of each paragraph, so we need not do anything with that.
3107
% When the entry text needs to be broken, just fill out the first line
3109
\rightskip = 0pt plus1fil
3111
% A bit of stretch before each entry for the benefit of balancing columns.
3114
% Start a ``paragraph'' for the index entry so the line breaking
3115
% parameters we've set above will have an effect.
3118
% Insert the text of the index entry. TeX will do line-breaking on it.
3120
% The following is kludged to not output a line of dots in the index if
3121
% there are no page numbers. The next person who breaks this will be
3122
% cursed by a Unix daemon.
3125
\edef\tempc{\tempa}%
3126
\edef\tempd{\tempb}%
3127
\ifx\tempc\tempd\ \else%
3129
% If we must, put the page number on a line of its own, and fill out
3130
% this line with blank space. (The \hfil is overwhelmed with the
3131
% fill leaders glue in \indexdotfill if the page number does fit.)
3133
\null\nobreak\indexdotfill % Have leaders before the page number.
3135
% The `\ ' here is removed by the implicit \unskip that TeX does as
3136
% part of (the primitive) \par. Without it, a spurious underfull
3139
\pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
3141
\ #2% The page number ends the paragraph.
3147
% Like \dotfill except takes at least 1 em.
3148
\def\indexdotfill{\cleaders
3149
\hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill}
3151
\def\primary #1{\line{#1\hfil}}
3153
\newskip\secondaryindent \secondaryindent=0.5cm
3154
\def\secondary#1#2{{%
3159
\noindent\hskip\secondaryindent\hbox{#1}\indexdotfill
3161
\pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
3168
% Define two-column mode, which we use to typeset indexes.
3169
% Adapted from the TeXbook, page 416, which is to say,
3170
% the manmac.tex format used to print the TeXbook itself.
3174
\newdimen\doublecolumnhsize
3176
\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
3177
% Grab any single-column material above us.
3180
% Here is a possibility not foreseen in manmac: if we accumulate a
3181
% whole lot of material, we might end up calling this \output
3182
% routine twice in a row (see the doublecol-lose test, which is
3183
% essentially a couple of indexes with @setchapternewpage off). In
3184
% that case we just ship out what is in \partialpage with the normal
3185
% output routine. Generally, \partialpage will be empty when this
3186
% runs and this will be a no-op. See the indexspread.tex test case.
3187
\ifvoid\partialpage \else
3188
\onepageout{\pagecontents\partialpage}%
3191
\global\setbox\partialpage = \vbox{%
3192
% Unvbox the main output page.
3194
\kern-\topskip \kern\baselineskip
3197
\eject % run that output routine to set \partialpage
3199
% Use the double-column output routine for subsequent pages.
3200
\output = {\doublecolumnout}%
3202
% Change the page size parameters. We could do this once outside this
3203
% routine, in each of @smallbook, @afourpaper, and the default 8.5x11
3204
% format, but then we repeat the same computation. Repeating a couple
3205
% of assignments once per index is clearly meaningless for the
3206
% execution time, so we may as well do it in one place.
3208
% First we halve the line length, less a little for the gutter between
3209
% the columns. We compute the gutter based on the line length, so it
3210
% changes automatically with the paper format. The magic constant
3211
% below is chosen so that the gutter has the same value (well, +-<1pt)
3212
% as it did when we hard-coded it.
3214
% We put the result in a separate register, \doublecolumhsize, so we
3215
% can restore it in \pagesofar, after \hsize itself has (potentially)
3218
\doublecolumnhsize = \hsize
3219
\advance\doublecolumnhsize by -.04154\hsize
3220
\divide\doublecolumnhsize by 2
3221
\hsize = \doublecolumnhsize
3223
% Double the \vsize as well. (We don't need a separate register here,
3224
% since nobody clobbers \vsize.)
3228
% The double-column output routine for all double-column pages except
3231
\def\doublecolumnout{%
3232
\splittopskip=\topskip \splitmaxdepth=\maxdepth
3233
% Get the available space for the double columns -- the normal
3234
% (undoubled) page height minus any material left over from the
3238
\advance\dimen@ by -\ht\partialpage
3240
% box0 will be the left-hand column, box2 the right.
3241
\setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
3242
\onepageout\pagesofar
3244
\penalty\outputpenalty
3247
% Re-output the contents of the output page -- any previous material,
3248
% followed by the two boxes we just split, in box0 and box2.
3252
\hsize = \doublecolumnhsize
3253
\wd0=\hsize \wd2=\hsize
3254
\hbox to\pagewidth{\box0\hfil\box2}%
3257
% All done with double columns.
3258
\def\enddoublecolumns{%
3260
% Split the last of the double-column material. Leave it on the
3261
% current page, no automatic page break.
3264
% If we end up splitting too much material for the current page,
3265
% though, there will be another page break right after this \output
3266
% invocation ends. Having called \balancecolumns once, we do not
3267
% want to call it again. Therefore, reset \output to its normal
3268
% definition right away. (We hope \balancecolumns will never be
3269
% called on to balance too much material, but if it is, this makes
3270
% the output somewhat more palatable.)
3271
\global\output = {\onepageout{\pagecontents\PAGE}}%
3274
\endgroup % started in \begindoublecolumns
3276
% \pagegoal was set to the doubled \vsize above, since we restarted
3277
% the current page. We're now back to normal single-column
3278
% typesetting, so reset \pagegoal to the normal \vsize (after the
3279
% \endgroup where \vsize got restored).
3283
% Called at the end of the double column material.
3284
\def\balancecolumns{%
3285
\setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
3287
\advance\dimen@ by \topskip
3288
\advance\dimen@ by-\baselineskip
3289
\divide\dimen@ by 2 % target to split to
3290
%debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}%
3291
\splittopskip = \topskip
3292
% Loop until we get a decent breakpoint.
3296
\global\setbox3 = \copy0
3297
\global\setbox1 = \vsplit3 to \dimen@
3299
\global\advance\dimen@ by 1pt
3302
%debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
3303
\setbox0=\vbox to\dimen@{\unvbox1}%
3304
\setbox2=\vbox to\dimen@{\unvbox3}%
3308
\catcode`\@ = \other
3311
\message{sectioning,}
3312
% Chapters, sections, etc.
3315
\newcount\secno \secno=0
3316
\newcount\subsecno \subsecno=0
3317
\newcount\subsubsecno \subsubsecno=0
3319
% This counter is funny since it counts through charcodes of letters A, B, ...
3320
\newcount\appendixno \appendixno = `\@
3321
% \def\appendixletter{\char\the\appendixno}
3322
% We do the following for the sake of pdftex, which needs the actual
3323
% letter in the expansion, not just typeset.
3324
\def\appendixletter{%
3325
\ifnum\appendixno=`A A%
3326
\else\ifnum\appendixno=`B B%
3327
\else\ifnum\appendixno=`C C%
3328
\else\ifnum\appendixno=`D D%
3329
\else\ifnum\appendixno=`E E%
3330
\else\ifnum\appendixno=`F F%
3331
\else\ifnum\appendixno=`G G%
3332
\else\ifnum\appendixno=`H H%
3333
\else\ifnum\appendixno=`I I%
3334
\else\ifnum\appendixno=`J J%
3335
\else\ifnum\appendixno=`K K%
3336
\else\ifnum\appendixno=`L L%
3337
\else\ifnum\appendixno=`M M%
3338
\else\ifnum\appendixno=`N N%
3339
\else\ifnum\appendixno=`O O%
3340
\else\ifnum\appendixno=`P P%
3341
\else\ifnum\appendixno=`Q Q%
3342
\else\ifnum\appendixno=`R R%
3343
\else\ifnum\appendixno=`S S%
3344
\else\ifnum\appendixno=`T T%
3345
\else\ifnum\appendixno=`U U%
3346
\else\ifnum\appendixno=`V V%
3347
\else\ifnum\appendixno=`W W%
3348
\else\ifnum\appendixno=`X X%
3349
\else\ifnum\appendixno=`Y Y%
3350
\else\ifnum\appendixno=`Z Z%
3351
% The \the is necessary, despite appearances, because \appendixletter is
3352
% expanded while writing the .toc file. \char\appendixno is not
3353
% expandable, thus it is written literally, thus all appendixes come out
3354
% with the same letter (or @) in the toc without it.
3355
\else\char\the\appendixno
3356
\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
3357
\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
3359
% Each @chapter defines this as the name of the chapter.
3360
% page headings and footings can use it. @section does likewise.
3364
\newcount\absseclevel % used to calculate proper heading level
3365
\newcount\secbase\secbase=0 % @raise/lowersections modify this count
3367
% @raisesections: treat @section as chapter, @subsection as section, etc.
3368
\def\raisesections{\global\advance\secbase by -1}
3369
\let\up=\raisesections % original BFox name
3371
% @lowersections: treat @chapter as section, @section as subsection, etc.
3372
\def\lowersections{\global\advance\secbase by 1}
3373
\let\down=\lowersections % original BFox name
3375
% Choose a numbered-heading macro
3376
% #1 is heading level if unmodified by @raisesections or @lowersections
3377
% #2 is text for heading
3378
\def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
3384
\numberedsubseczzz{#2}
3386
\numberedsubsubseczzz{#2}
3388
\ifnum \absseclevel<0
3391
\numberedsubsubseczzz{#2}
3396
% like \numhead, but chooses appendix heading levels
3397
\def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
3401
\appendixsectionzzz{#2}
3403
\appendixsubseczzz{#2}
3405
\appendixsubsubseczzz{#2}
3407
\ifnum \absseclevel<0
3410
\appendixsubsubseczzz{#2}
3415
% like \numhead, but chooses numberless heading levels
3416
\def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
3420
\unnumberedseczzz{#2}
3422
\unnumberedsubseczzz{#2}
3424
\unnumberedsubsubseczzz{#2}
3426
\ifnum \absseclevel<0
3429
\unnumberedsubsubseczzz{#2}
3434
% @chapter, @appendix, @unnumbered.
3435
\def\thischaptername{No Chapter Title}
3436
\outer\def\chapter{\parsearg\chapteryyy}
3437
\def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz
3438
\def\chapterzzz #1{%
3439
\secno=0 \subsecno=0 \subsubsecno=0
3440
\global\advance \chapno by 1 \message{\putwordChapter\space \the\chapno}%
3441
\chapmacro {#1}{\the\chapno}%
3442
\gdef\thissection{#1}%
3443
\gdef\thischaptername{#1}%
3444
% We don't substitute the actual chapter name into \thischapter
3445
% because we don't want its macros evaluated now.
3446
\xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}%
3448
\edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}%
3452
\global\let\section = \numberedsec
3453
\global\let\subsection = \numberedsubsec
3454
\global\let\subsubsection = \numberedsubsubsec
3457
\outer\def\appendix{\parsearg\appendixyyy}
3458
\def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz
3459
\def\appendixzzz #1{%
3460
\secno=0 \subsecno=0 \subsubsecno=0
3461
\global\advance \appendixno by 1
3462
\message{\putwordAppendix\space \appendixletter}%
3463
\chapmacro {#1}{\putwordAppendix{} \appendixletter}%
3464
\gdef\thissection{#1}%
3465
\gdef\thischaptername{#1}%
3466
\xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}%
3468
\edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}%
3469
{\putwordAppendix{} \appendixletter}}}%
3472
\global\let\section = \appendixsec
3473
\global\let\subsection = \appendixsubsec
3474
\global\let\subsubsection = \appendixsubsubsec
3477
% @centerchap is like @unnumbered, but the heading is centered.
3478
\outer\def\centerchap{\parsearg\centerchapyyy}
3479
\def\centerchapyyy #1{{\let\unnumbchapmacro=\centerchapmacro \unnumberedyyy{#1}}}
3481
% @top is like @unnumbered.
3482
\outer\def\top{\parsearg\unnumberedyyy}
3484
\outer\def\unnumbered{\parsearg\unnumberedyyy}
3485
\def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
3486
\def\unnumberedzzz #1{%
3487
\secno=0 \subsecno=0 \subsubsecno=0
3489
% This used to be simply \message{#1}, but TeX fully expands the
3490
% argument to \message. Therefore, if #1 contained @-commands, TeX
3491
% expanded them. For example, in `@unnumbered The @cite{Book}', TeX
3492
% expanded @cite (which turns out to cause errors because \cite is meant
3493
% to be executed, not expanded).
3495
% Anyway, we don't want the fully-expanded definition of @cite to appear
3496
% as a result of the \message, we just want `@cite' itself. We use
3497
% \the<toks register> to achieve this: TeX expands \the<toks> only once,
3498
% simply yielding the contents of <toks register>. (We also do this for
3500
\toks0 = {#1}\message{(\the\toks0)}%
3502
\unnumbchapmacro {#1}%
3503
\gdef\thischapter{#1}\gdef\thissection{#1}%
3505
\edef\temp{\noexpand\writetocentry{\realbackslash unnumbchapentry{\the\toks0}}}%
3508
\global\let\section = \unnumberedsec
3509
\global\let\subsection = \unnumberedsubsec
3510
\global\let\subsubsection = \unnumberedsubsubsec
3514
\outer\def\numberedsec{\parsearg\secyyy}
3515
\def\secyyy #1{\numhead1{#1}} % normally calls seczzz
3517
\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
3518
\gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}%
3520
\edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}%
3521
{\the\chapno}{\the\secno}}}%
3527
\outer\def\appendixsection{\parsearg\appendixsecyyy}
3528
\outer\def\appendixsec{\parsearg\appendixsecyyy}
3529
\def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz
3530
\def\appendixsectionzzz #1{%
3531
\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
3532
\gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}%
3534
\edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}%
3535
{\appendixletter}{\the\secno}}}%
3541
\outer\def\unnumberedsec{\parsearg\unnumberedsecyyy}
3542
\def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz
3543
\def\unnumberedseczzz #1{%
3544
\plainsecheading {#1}\gdef\thissection{#1}%
3546
\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsecentry{\the\toks0}}}%
3553
\outer\def\numberedsubsec{\parsearg\numberedsubsecyyy}
3554
\def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz
3555
\def\numberedsubseczzz #1{%
3556
\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
3557
\subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}%
3559
\edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}%
3560
{\the\chapno}{\the\secno}{\the\subsecno}}}%
3566
\outer\def\appendixsubsec{\parsearg\appendixsubsecyyy}
3567
\def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz
3568
\def\appendixsubseczzz #1{%
3569
\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
3570
\subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}%
3572
\edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}%
3573
{\appendixletter}{\the\secno}{\the\subsecno}}}%
3579
\outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy}
3580
\def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
3581
\def\unnumberedsubseczzz #1{%
3582
\plainsubsecheading {#1}\gdef\thissection{#1}%
3584
\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsecentry%
3592
\outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy}
3593
\def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz
3594
\def\numberedsubsubseczzz #1{%
3595
\gdef\thissection{#1}\global\advance \subsubsecno by 1 %
3596
\subsubsecheading {#1}
3597
{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
3599
\edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}%
3600
{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}%
3606
\outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy}
3607
\def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz
3608
\def\appendixsubsubseczzz #1{%
3609
\gdef\thissection{#1}\global\advance \subsubsecno by 1 %
3610
\subsubsecheading {#1}
3611
{\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
3613
\edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}%
3614
{\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}%
3620
\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy}
3621
\def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
3622
\def\unnumberedsubsubseczzz #1{%
3623
\plainsubsubsecheading {#1}\gdef\thissection{#1}%
3625
\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsubsecentry%
3632
% These are variants which are not "outer", so they can appear in @ifinfo.
3633
% Actually, they should now be obsolete; ordinary section commands should work.
3634
\def\infotop{\parsearg\unnumberedzzz}
3635
\def\infounnumbered{\parsearg\unnumberedzzz}
3636
\def\infounnumberedsec{\parsearg\unnumberedseczzz}
3637
\def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz}
3638
\def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz}
3640
\def\infoappendix{\parsearg\appendixzzz}
3641
\def\infoappendixsec{\parsearg\appendixseczzz}
3642
\def\infoappendixsubsec{\parsearg\appendixsubseczzz}
3643
\def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz}
3645
\def\infochapter{\parsearg\chapterzzz}
3646
\def\infosection{\parsearg\sectionzzz}
3647
\def\infosubsection{\parsearg\subsectionzzz}
3648
\def\infosubsubsection{\parsearg\subsubsectionzzz}
3650
% These macros control what the section commands do, according
3651
% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
3652
% Define them by default for a numbered chapter.
3653
\global\let\section = \numberedsec
3654
\global\let\subsection = \numberedsubsec
3655
\global\let\subsubsection = \numberedsubsubsec
3657
% Define @majorheading, @heading and @subheading
3659
% NOTE on use of \vbox for chapter headings, section headings, and such:
3660
% 1) We use \vbox rather than the earlier \line to permit
3661
% overlong headings to fold.
3662
% 2) \hyphenpenalty is set to 10000 because hyphenation in a
3663
% heading is obnoxious; this forbids it.
3664
% 3) Likewise, headings look best if no \parindent is used, and
3665
% if justification is not attempted. Hence \raggedright.
3668
\def\majorheading{\parsearg\majorheadingzzz}
3669
\def\majorheadingzzz #1{%
3670
{\advance\chapheadingskip by 10pt \chapbreak }%
3671
{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3672
\parindent=0pt\raggedright
3673
\rm #1\hfill}}\bigskip \par\penalty 200}
3675
\def\chapheading{\parsearg\chapheadingzzz}
3676
\def\chapheadingzzz #1{\chapbreak %
3677
{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3678
\parindent=0pt\raggedright
3679
\rm #1\hfill}}\bigskip \par\penalty 200}
3681
% @heading, @subheading, @subsubheading.
3682
\def\heading{\parsearg\plainsecheading}
3683
\def\subheading{\parsearg\plainsubsecheading}
3684
\def\subsubheading{\parsearg\plainsubsubsecheading}
3686
% These macros generate a chapter, section, etc. heading only
3687
% (including whitespace, linebreaking, etc. around it),
3688
% given all the information in convenient, parsed form.
3690
%%% Args are the skip and penalty (usually negative)
3691
\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
3693
\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
3695
%%% Define plain chapter starts, and page on/off switching for it
3696
% Parameter controlling skip before chapter headings (if needed)
3698
\newskip\chapheadingskip
3700
\def\chapbreak{\dobreak \chapheadingskip {-4000}}
3701
\def\chappager{\par\vfill\supereject}
3702
\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi}
3704
\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
3707
\global\let\contentsalignmacro = \chappager
3708
\global\let\pchapsepmacro=\chapbreak
3709
\global\let\pagealignmacro=\chappager}
3712
\global\let\contentsalignmacro = \chappager
3713
\global\let\pchapsepmacro=\chappager
3714
\global\let\pagealignmacro=\chappager
3715
\global\def\HEADINGSon{\HEADINGSsingle}}
3718
\global\let\contentsalignmacro = \chapoddpage
3719
\global\let\pchapsepmacro=\chapoddpage
3720
\global\let\pagealignmacro=\chapoddpage
3721
\global\def\HEADINGSon{\HEADINGSdouble}}
3726
\global\let\chapmacro=\chfplain
3727
\global\let\unnumbchapmacro=\unnchfplain
3728
\global\let\centerchapmacro=\centerchfplain}
3730
% Plain chapter opening.
3731
% #1 is the text, #2 the chapter number or empty if unnumbered.
3737
\setbox0 = \hbox{#2\ifx\chapnum\empty\else\enspace\fi}%
3738
\vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
3739
\hangindent = \wd0 \centerparametersmaybe
3742
\nobreak\bigskip % no page break after a chapter title
3746
% Plain opening for unnumbered.
3747
\def\unnchfplain#1{\chfplain{#1}{}}
3749
% @centerchap -- centered and unnumbered.
3750
\let\centerparametersmaybe = \relax
3751
\def\centerchfplain#1{{%
3752
\def\centerparametersmaybe{%
3753
\advance\rightskip by 3\rightskip
3754
\leftskip = \rightskip
3760
\CHAPFplain % The default
3762
\def\unnchfopen #1{%
3763
\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3764
\parindent=0pt\raggedright
3765
\rm #1\hfill}}\bigskip \par\nobreak
3768
\def\chfopen #1#2{\chapoddpage {\chapfonts
3769
\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
3773
\def\centerchfopen #1{%
3774
\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3776
\hfill {\rm #1}\hfill}}\bigskip \par\nobreak
3780
\global\let\chapmacro=\chfopen
3781
\global\let\unnumbchapmacro=\unnchfopen
3782
\global\let\centerchapmacro=\centerchfopen}
3786
\newskip\secheadingskip
3787
\def\secheadingbreak{\dobreak \secheadingskip {-1000}}
3788
\def\secheading#1#2#3{\sectionheading{sec}{#2.#3}{#1}}
3789
\def\plainsecheading#1{\sectionheading{sec}{}{#1}}
3791
% Subsection titles.
3792
\newskip \subsecheadingskip
3793
\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}}
3794
\def\subsecheading#1#2#3#4{\sectionheading{subsec}{#2.#3.#4}{#1}}
3795
\def\plainsubsecheading#1{\sectionheading{subsec}{}{#1}}
3797
% Subsubsection titles.
3798
\let\subsubsecheadingskip = \subsecheadingskip
3799
\let\subsubsecheadingbreak = \subsecheadingbreak
3800
\def\subsubsecheading#1#2#3#4#5{\sectionheading{subsubsec}{#2.#3.#4.#5}{#1}}
3801
\def\plainsubsubsecheading#1{\sectionheading{subsubsec}{}{#1}}
3804
% Print any size section title.
3806
% #1 is the section type (sec/subsec/subsubsec), #2 is the section
3807
% number (maybe empty), #3 the text.
3808
\def\sectionheading#1#2#3{%
3810
\expandafter\advance\csname #1headingskip\endcsname by \parskip
3811
\csname #1headingbreak\endcsname
3814
% Switch to the right set of fonts.
3815
\csname #1fonts\endcsname \rm
3817
% Only insert the separating space if we have a section number.
3819
\setbox0 = \hbox{#2\ifx\secnum\empty\else\enspace\fi}%
3821
\vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
3822
\hangindent = \wd0 % zero if no section number
3825
\ifdim\parskip<10pt \nobreak\kern10pt\nobreak\kern-\parskip\fi \nobreak
3830
% Table of contents.
3833
% Write an entry to the toc file, opening it if necessary.
3834
% Called from @chapter, etc. We supply {\folio} at the end of the
3835
% argument, which will end up as the last argument to the \...entry macro.
3837
% We open the .toc file here instead of at @setfilename or any other
3838
% given time so that @contents can be put in the document anywhere.
3840
\newif\iftocfileopened
3841
\def\writetocentry#1{%
3842
\iftocfileopened\else
3843
\immediate\openout\tocfile = \jobname.toc
3844
\global\tocfileopenedtrue
3846
\iflinks \write\tocfile{#1{\folio}}\fi
3849
\newskip\contentsrightmargin \contentsrightmargin=1in
3850
\newcount\savepageno
3851
\newcount\lastnegativepageno \lastnegativepageno = -1
3853
% Finish up the main text and prepare to read what we've written
3856
\def\startcontents#1{%
3857
% If @setchapternewpage on, and @headings double, the contents should
3858
% start on an odd page, unlike chapters. Thus, we maintain
3859
% \contentsalignmacro in parallel with \pagealignmacro.
3860
% From: Torbjorn Granlund <tege@matematik.su.se>
3862
\immediate\closeout\tocfile
3864
% Don't need to put `Contents' or `Short Contents' in the headline.
3865
% It is abundantly clear what they are.
3866
\unnumbchapmacro{#1}\def\thischapter{}%
3867
\savepageno = \pageno
3868
\begingroup % Set up to handle contents files properly.
3869
\catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11
3870
% We can't do this, because then an actual ^ in a section
3871
% title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97.
3872
%\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
3873
\raggedbottom % Worry more about breakpoints than the bottom.
3874
\advance\hsize by -\contentsrightmargin % Don't use the full line length.
3876
% Roman numerals for page numbers.
3877
\ifnum \pageno>0 \pageno = \lastnegativepageno \fi
3881
% Normal (long) toc.
3883
\startcontents{\putwordTOC}%
3884
\openin 1 \jobname.toc
3890
\contentsalignmacro % in case @setchapternewpage odd is in effect
3893
\lastnegativepageno = \pageno
3894
\pageno = \savepageno
3897
% And just the chapters.
3898
\def\summarycontents{%
3899
\startcontents{\putwordShortTOC}%
3901
\let\chapentry = \shortchapentry
3902
\let\unnumbchapentry = \shortunnumberedentry
3903
% We want a true roman here for the page numbers.
3905
\let\rm=\shortcontrm \let\bf=\shortcontbf \let\sl=\shortcontsl
3907
\hyphenpenalty = 10000
3908
\advance\baselineskip by 1pt % Open it up a little.
3909
\def\secentry ##1##2##3##4{}
3910
\def\unnumbsecentry ##1##2{}
3911
\def\subsecentry ##1##2##3##4##5{}
3912
\def\unnumbsubsecentry ##1##2{}
3913
\def\subsubsecentry ##1##2##3##4##5##6{}
3914
\def\unnumbsubsubsecentry ##1##2{}
3915
\openin 1 \jobname.toc
3921
\contentsalignmacro % in case @setchapternewpage odd is in effect
3923
\lastnegativepageno = \pageno
3924
\pageno = \savepageno
3926
\let\shortcontents = \summarycontents
3929
\pdfcatalog{/PageMode /UseOutlines}%
3932
% These macros generate individual entries in the table of contents.
3933
% The first argument is the chapter or section name.
3934
% The last argument is the page number.
3935
% The arguments in between are the chapter number, section number, ...
3937
% Chapter-level things, for both the long and short contents.
3938
\def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}}
3940
% See comments in \dochapentry re vbox and related settings
3941
\def\shortchapentry#1#2#3{%
3942
\tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#3\egroup}%
3945
% Typeset the label for a chapter or appendix for the short contents.
3946
% The arg is, e.g. `Appendix A' for an appendix, or `3' for a chapter.
3947
% We could simplify the code here by writing out an \appendixentry
3948
% command in the toc file for appendices, instead of using \chapentry
3949
% for both, but it doesn't seem worth it.
3951
\newdimen\shortappendixwidth
3953
\def\shortchaplabel#1{%
3954
% Compute width of word "Appendix", may change with language.
3955
\setbox0 = \hbox{\shortcontrm \putwordAppendix}%
3956
\shortappendixwidth = \wd0
3958
% We typeset #1 in a box of constant width, regardless of the text of
3959
% #1, so the chapter titles will come out aligned.
3960
\setbox0 = \hbox{#1}%
3961
\dimen0 = \ifdim\wd0 > \shortappendixwidth \shortappendixwidth \else 0pt \fi
3963
% This space should be plenty, since a single number is .5em, and the
3964
% widest letter (M) is 1em, at least in the Computer Modern fonts.
3965
% (This space doesn't include the extra space that gets added after
3966
% the label; that gets put in by \shortchapentry above.)
3967
\advance\dimen0 by 1.1em
3968
\hbox to \dimen0{#1\hfil}%
3971
\def\unnumbchapentry#1#2{\dochapentry{#1}{#2}}
3972
\def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno\bgroup#2\egroup}}
3975
\def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}}
3976
\def\unnumbsecentry#1#2{\dosecentry{#1}{#2}}
3979
\def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}}
3980
\def\unnumbsubsecentry#1#2{\dosubsecentry{#1}{#2}}
3982
% And subsubsections.
3983
\def\subsubsecentry#1#2#3#4#5#6{%
3984
\dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}}
3985
\def\unnumbsubsubsecentry#1#2{\dosubsubsecentry{#1}{#2}}
3987
% This parameter controls the indentation of the various levels.
3988
\newdimen\tocindent \tocindent = 3pc
3990
% Now for the actual typesetting. In all these, #1 is the text and #2 is the
3993
% If the toc has to be broken over pages, we want it to be at chapters
3994
% if at all possible; hence the \penalty.
3995
\def\dochapentry#1#2{%
3996
\penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
3999
\tocentry{#1}{\dopageno\bgroup#2\egroup}%
4001
\nobreak\vskip .25\baselineskip plus.1\baselineskip
4004
\def\dosecentry#1#2{\begingroup
4005
\secentryfonts \leftskip=\tocindent
4006
\tocentry{#1}{\dopageno\bgroup#2\egroup}%
4009
\def\dosubsecentry#1#2{\begingroup
4010
\subsecentryfonts \leftskip=2\tocindent
4011
\tocentry{#1}{\dopageno\bgroup#2\egroup}%
4014
\def\dosubsubsecentry#1#2{\begingroup
4015
\subsubsecentryfonts \leftskip=3\tocindent
4016
\tocentry{#1}{\dopageno\bgroup#2\egroup}%
4019
% Final typesetting of a toc entry; we use the same \entry macro as for
4020
% the index entries, but we want to suppress hyphenation here. (We
4021
% can't do that in the \entry macro, since index entries might consist
4022
% of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.)
4023
\def\tocentry#1#2{\begingroup
4024
\vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks
4025
% Do not use \turnoffactive in these arguments. Since the toc is
4026
% typeset in cmr, so characters such as _ would come out wrong; we
4027
% have to do the usual translation tricks.
4031
% Space between chapter (or whatever) number and the title.
4032
\def\labelspace{\hskip1em \relax}
4034
\def\dopageno#1{{\rm #1}}
4035
\def\doshortpageno#1{{\rm #1}}
4037
\def\chapentryfonts{\secfonts \rm}
4038
\def\secentryfonts{\textfonts}
4039
\let\subsecentryfonts = \textfonts
4040
\let\subsubsecentryfonts = \textfonts
4043
\message{environments,}
4044
% @foo ... @end foo.
4046
% Since these characters are used in examples, it should be an even number of
4047
% \tt widths. Each \tt character is 1en, so two makes it 1em.
4048
% Furthermore, these definitions must come after we define our fonts.
4049
\newbox\dblarrowbox \newbox\longdblarrowbox
4050
\newbox\pushcharbox \newbox\bullbox
4051
\newbox\equivbox \newbox\errorbox
4054
%\global\setbox\dblarrowbox = \hbox to 1em{\hfil$\Rightarrow$\hfil}
4055
%\global\setbox\longdblarrowbox = \hbox to 1em{\hfil$\mapsto$\hfil}
4056
%\global\setbox\pushcharbox = \hbox to 1em{\hfil$\dashv$\hfil}
4057
%\global\setbox\equivbox = \hbox to 1em{\hfil$\ptexequiv$\hfil}
4058
% Adapted from the manmac format (p.420 of TeXbook)
4059
%\global\setbox\bullbox = \hbox to 1em{\kern.15em\vrule height .75ex width .85ex
4063
% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
4065
\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
4066
\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
4067
\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
4068
\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
4070
% Adapted from the TeXbook's \boxit.
4071
{\tentt \global\dimen0 = 3em}% Width of the box.
4072
\dimen2 = .55pt % Thickness of rules
4073
% The text. (`r' is open on the right, `e' somewhat less so on the left.)
4074
\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
4076
\global\setbox\errorbox=\hbox to \dimen0{\hfil
4077
\hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
4078
\advance\hsize by -2\dimen2 % Rules.
4080
\hrule height\dimen2
4081
\hbox{\vrule width\dimen2 \kern3pt % Space to left of text.
4082
\vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
4083
\kern3pt\vrule width\dimen2}% Space to right.
4084
\hrule height\dimen2}
4087
% The @error{} command.
4088
\def\error{\leavevmode\lower.7ex\copy\errorbox}
4090
% @tex ... @end tex escapes into raw Tex temporarily.
4091
% One exception: @ is still an escape character, so that @end tex works.
4092
% But \@ or @@ will get a plain tex @ character.
4094
\def\tex{\begingroup
4095
\catcode `\\=0 \catcode `\{=1 \catcode `\}=2
4096
\catcode `\$=3 \catcode `\&=4 \catcode `\#=6
4097
\catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie
4099
\catcode 43=12 % plus
4108
\let\bullet=\ptexbullet
4113
\let\equiv=\ptexequiv
4122
\def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
4123
\def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
4125
\let\Etex=\endgroup}
4127
% Define @lisp ... @endlisp.
4128
% @lisp does a \begingroup so it can rebind things,
4129
% including the definition of @endlisp (which normally is erroneous).
4131
% Amount to narrow the margins by for @lisp.
4132
\newskip\lispnarrowing \lispnarrowing=0.4in
4134
% This is the definition that ^^M gets inside @lisp, @example, and other
4135
% such environments. \null is better than a space, since it doesn't
4137
\def\lisppar{\null\endgraf}
4139
% Make each space character in the input produce a normal interword
4140
% space in the output. Don't allow a line break at this space, as this
4141
% is used only in environments like @example, where each line of input
4142
% should produce a line of output anyway.
4145
\gdef\sepspaces{\obeyspaces\let =\tie}}
4147
% Define \obeyedspace to be our active space, whatever it is. This is
4148
% for use in \parsearg.
4150
\global\let\obeyedspace= }
4152
% This space is always present above and below environments.
4153
\newskip\envskipamount \envskipamount = 0pt
4155
% Make spacing and below environment symmetrical. We use \parskip here
4156
% to help in doing that, since in @example-like environments \parskip
4157
% is reset to zero; thus the \afterenvbreak inserts no space -- but the
4158
% start of the next paragraph will insert \parskip
4160
\def\aboveenvbreak{{%
4161
\ifnum\lastpenalty < 10000
4162
\advance\envskipamount by \parskip
4164
\ifdim\lastskip<\envskipamount
4167
\vskip\envskipamount
4172
\let\afterenvbreak = \aboveenvbreak
4174
% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins.
4175
\let\nonarrowing=\relax
4177
% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
4178
% environment contents.
4179
\font\circle=lcircle10
4181
\newdimen\cartouter\newdimen\cartinner
4182
\newskip\normbskip\newskip\normpskip\newskip\normlskip
4183
\circthick=\fontdimen8\circle
4185
\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
4186
\def\ctr{{\hskip 6pt\circle\char'010}}
4187
\def\cbl{{\circle\char'012\hskip -6pt}}
4188
\def\cbr{{\hskip 6pt\circle\char'011}}
4189
\def\carttop{\hbox to \cartouter{\hskip\lskip
4190
\ctl\leaders\hrule height\circthick\hfil\ctr
4192
\def\cartbot{\hbox to \cartouter{\hskip\lskip
4193
\cbl\leaders\hrule height\circthick\hfil\cbr
4196
\newskip\lskip\newskip\rskip
4198
\long\def\cartouche{%
4200
\lskip=\leftskip \rskip=\rightskip
4201
\leftskip=0pt\rightskip=0pt %we want these *outside*.
4202
\cartinner=\hsize \advance\cartinner by-\lskip
4203
\advance\cartinner by-\rskip
4205
\advance\cartouter by 18.4pt % allow for 3pt kerns on either
4206
% side, and for 6pt waste from
4207
% each corner char, and rule thickness
4208
\normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
4209
% Flag to tell @lisp, etc., not to narrow margin.
4210
\let\nonarrowing=\comment
4212
\baselineskip=0pt\parskip=0pt\lineskip=0pt
4221
\baselineskip=\normbskip
4222
\lineskip=\normlskip
4238
% This macro is called at the beginning of all the @example variants,
4242
\inENV % This group ends at the end of the body
4243
\hfuzz = 12pt % Don't be fussy
4244
\sepspaces % Make spaces be word-separators rather than space tokens.
4246
\let\par = \lisppar % don't ignore blank lines
4247
\obeylines % each line of input is a line of output
4250
\emergencystretch = 0pt % don't try to avoid overfull boxes
4251
% @cartouche defines \nonarrowing to inhibit narrowing
4252
% at next level down.
4253
\ifx\nonarrowing\relax
4254
\advance \leftskip by \lispnarrowing
4255
\exdentamount=\lispnarrowing
4256
\let\exdent=\nofillexdent
4257
\let\nonarrowing=\relax
4261
% Define the \E... control sequence only if we are inside the particular
4262
% environment, so the error checking in \end will work.
4264
% To end an @example-like environment, we first end the paragraph (via
4265
% \afterenvbreak's vertical glue), and then the group. That way we keep
4266
% the zero \parskip that the environments set -- \parskip glue will be
4267
% inserted at the beginning of the next paragraph in the document, after
4270
\def\nonfillfinish{\afterenvbreak\endgroup}
4272
% @lisp: indented, narrowed, typewriter font.
4273
\def\lisp{\begingroup
4275
\let\Elisp = \nonfillfinish
4277
\let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
4278
\gobble % eat return
4281
% @example: Same as @lisp.
4282
\def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp}
4284
% @small... is usually equivalent to the non-small (@smallbook
4285
% redefines). We must call \example (or whatever) last in the
4286
% definition, since it reads the return following the @example (or
4287
% whatever) command.
4289
% This actually allows (for example) @end display inside an
4290
% @smalldisplay. Too bad, but makeinfo will catch the error anyway.
4292
\def\smalldisplay{\begingroup\def\Esmalldisplay{\nonfillfinish\endgroup}\display}
4293
\def\smallexample{\begingroup\def\Esmallexample{\nonfillfinish\endgroup}\lisp}
4294
\def\smallformat{\begingroup\def\Esmallformat{\nonfillfinish\endgroup}\format}
4295
\def\smalllisp{\begingroup\def\Esmalllisp{\nonfillfinish\endgroup}\lisp}
4297
% Real @smallexample and @smalllisp (when @smallbook): use smaller fonts.
4298
% Originally contributed by Pavel@xerox.
4299
\def\smalllispx{\begingroup
4300
\def\Esmalllisp{\nonfillfinish\endgroup}%
4301
\def\Esmallexample{\nonfillfinish\endgroup}%
4306
% @display: same as @lisp except keep current font.
4308
\def\display{\begingroup
4310
\let\Edisplay = \nonfillfinish
4314
% @smalldisplay (when @smallbook): @display plus smaller fonts.
4316
\def\smalldisplayx{\begingroup
4317
\def\Esmalldisplay{\nonfillfinish\endgroup}%
4322
% @format: same as @display except don't narrow margins.
4324
\def\format{\begingroup
4325
\let\nonarrowing = t
4327
\let\Eformat = \nonfillfinish
4331
% @smallformat (when @smallbook): @format plus smaller fonts.
4333
\def\smallformatx{\begingroup
4334
\def\Esmallformat{\nonfillfinish\endgroup}%
4339
% @flushleft (same as @format).
4341
\def\flushleft{\begingroup \def\Eflushleft{\nonfillfinish\endgroup}\format}
4345
\def\flushright{\begingroup
4346
\let\nonarrowing = t
4348
\let\Eflushright = \nonfillfinish
4349
\advance\leftskip by 0pt plus 1fill
4354
% @quotation does normal linebreaking (hence we can't use \nonfillstart)
4355
% and narrows the margins.
4358
\begingroup\inENV %This group ends at the end of the @quotation body
4359
{\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
4362
% We have retained a nonzero parskip for the environment, since we're
4363
% doing normal filling. So to avoid extra space below the environment...
4364
\def\Equotation{\parskip = 0pt \nonfillfinish}%
4366
% @cartouche defines \nonarrowing to inhibit narrowing at next level down.
4367
\ifx\nonarrowing\relax
4368
\advance\leftskip by \lispnarrowing
4369
\advance\rightskip by \lispnarrowing
4370
\exdentamount = \lispnarrowing
4371
\let\nonarrowing = \relax
4376
% LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
4377
% If we want to allow any <char> as delimiter,
4378
% we need the curly braces so that makeinfo sees the @verb command, eg:
4379
% `@verbx...x' would look like the '@verbx' command. --janneke@gnu.org
4381
% [Knuth]: Donald Ervin Knuth, 1996. The TeXbook.
4383
% [Knuth] p. 344; only we need to do '@' too
4385
\do\ \do\\\do\@\do\{\do\}\do\$\do\&%
4386
\do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~}
4389
\def\uncatcodespecials{%
4390
\def\do##1{\catcode`##1=12}\dospecials}
4392
% [Knuth] pp. 380,381,391
4393
% Disable Spanish ligatures ?` and !` of \tt font
4395
\catcode`\`=\active\gdef`{\relax\lq}
4398
% Setup for the @verb command.
4400
% Eight spaces for a tab
4402
\catcode`\^^I=\active
4403
\gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }}
4407
\tt % easiest (and conventionally used) font for verbatim
4408
\def\par{\leavevmode\endgraf}%
4411
% Respect line breaks,
4412
% print special symbols as themselves, and
4413
% make each space count
4414
% must do in this order:
4415
\obeylines \uncatcodespecials \sepspaces
4418
% Setup for the @verbatim environment
4420
% Real tab expansion
4421
\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
4423
\def\starttabbox{\setbox0=\hbox\bgroup}
4425
\catcode`\^^I=\active
4427
\catcode`\^^I=\active
4428
\def^^I{\leavevmode\egroup
4429
\dimen0=\wd0 % the width so far, or since the previous tab
4430
\divide\dimen0 by\tabw
4431
\multiply\dimen0 by\tabw % compute previous multiple of \tabw
4432
\advance\dimen0 by\tabw % advance to next multiple of \tabw
4433
\wd0=\dimen0 \box0 \starttabbox
4437
\def\setupverbatim{%
4438
% Easiest (and conventionally used) font for verbatim
4440
\def\par{\leavevmode\egroup\box0\endgraf}%
4443
% Respect line breaks,
4444
% print special symbols as themselves, and
4445
% make each space count
4446
% must do in this order:
4447
\obeylines \uncatcodespecials \sepspaces
4448
\everypar{\starttabbox}%
4451
% Do the @verb magic: verbatim text is quoted by unique
4452
% delimiter characters. Before first delimiter expect a
4453
% right brace, after last delimiter expect closing brace:
4455
% \def\doverb'{'<char>#1<char>'}'{#1}
4457
% [Knuth] p. 382; only eat outer {}
4459
\catcode`[=1\catcode`]=2\catcode`\{=12\catcode`\}=12
4460
\gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
4463
\def\verb{\begingroup\setupverb\doverb}
4466
% Do the @verbatim magic: define the macro \doverbatim so that
4467
% the (first) argument ends when '@end verbatim' is reached, ie:
4469
% \def\doverbatim#1@end verbatim{#1}
4471
% For Texinfo it's a lot easier than for LaTeX,
4472
% because texinfo's \verbatim doesn't stop at '\end{verbatim}':
4473
% we need not redefine '\', '{' and '}'
4475
% Inspired by LaTeX's verbatim command set [latex.ltx]
4476
%% Include LaTeX hack for completeness -- never know
4478
%% \catcode`|=0 \catcode`[=1
4479
%% \catcode`]=2\catcode`\{=12\catcode`\}=12\catcode`\ =\active
4480
%% \catcode`\\=12|gdef|doverbatim#1@end verbatim[
4481
%% #1|endgroup|def|Everbatim[]|end[verbatim]]
4485
\gdef\doverbatim#1@end verbatim{#1\end{verbatim}}
4489
\def\Everbatim{\nonfillfinish\endgroup}%
4492
\advance\leftskip by -\defbodyindent
4493
\begingroup\setupverbatim\doverbatim
4496
% @verbatiminclude FILE - insert text of file in verbatim environment.
4498
% Allow normal characters that we make active in the argument (a file name).
4499
\def\verbatiminclude{%
4509
\parsearg\doverbatiminclude
4511
\def\setupverbatiminclude{%
4514
\advance\leftskip by -\defbodyindent
4515
\begingroup\setupverbatim
4518
\def\doverbatiminclude#1{%
4519
% Restore active chars for included file.
4523
\expandafter\expandafter\setupverbatiminclude\input\thisfile
4524
\endgroup\nonfillfinish\endgroup
4531
% Allow user to change definition object font (\df) internally
4532
\def\setdeffont #1 {\csname DEF#1\endcsname}
4534
\newskip\defbodyindent \defbodyindent=.4in
4535
\newskip\defargsindent \defargsindent=50pt
4536
\newskip\deftypemargin \deftypemargin=12pt
4537
\newskip\deflastargmargin \deflastargmargin=18pt
4539
\newcount\parencount
4540
% define \functionparens, which makes ( and ) and & do special things.
4541
% \functionparens affects the group it is contained in.
4543
\catcode`\(=\active \catcode`\)=\active \catcode`\&=\active
4544
\catcode`\[=\active \catcode`\]=\active}
4546
% Make control sequences which act like normal parenthesis chars.
4547
\let\lparen = ( \let\rparen = )
4549
{\activeparens % Now, smart parens don't turn on until &foo (see \amprm)
4551
% Be sure that we always have a definition for `(', etc. For example,
4552
% if the fn name has parens in it, \boldbrax will not be in effect yet,
4553
% so TeX would otherwise complain about undefined control sequence.
4554
\global\let(=\lparen \global\let)=\rparen
4555
\global\let[=\lbrack \global\let]=\rbrack
4557
\gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 }
4558
\gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
4559
% This is used to turn on special parens
4560
% but make & act ordinary (given that it's active).
4561
\gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr}
4563
% Definitions of (, ) and & used in args for functions.
4564
% This is the definition of ( outside of all parentheses.
4565
\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested
4566
\global\advance\parencount by 1
4569
% This is the definition of ( when already inside a level of parens.
4570
\gdef\opnested{\char`\(\global\advance\parencount by 1 }
4572
\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0.
4573
% also in that case restore the outer-level definition of (.
4574
\ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
4575
\global\advance \parencount by -1 }
4576
% If we encounter &foo, then turn on ()-hacking afterwards
4577
\gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ }
4579
\gdef\normalparens{\boldbrax\let&=\ampnr}
4580
} % End of definition inside \activeparens
4581
%% These parens (in \boldbrax) actually are a little bolder than the
4582
%% contained text. This is especially needed for [ and ]
4583
\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 }
4584
\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 }
4586
\def\lbrb{{\bf\char`\[}}
4587
\def\rbrb{{\bf\char`\]}}
4589
% Active &'s sneak into the index arguments, so make sure it's defined.
4592
\global\let& = \ampnr
4595
% First, defname, which formats the header line itself.
4596
% #1 should be the function name.
4597
% #2 should be the type of definition, such as "Function".
4600
% Get the values of \leftskip and \rightskip as they were
4601
% outside the @def...
4603
\advance\dimen2 by -\defbodyindent
4605
\setbox0=\hbox{\hskip \deflastargmargin{\rm #2}\hskip \deftypemargin}%
4606
\dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line
4607
\dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations
4608
\parshape 2 0in \dimen0 \defargsindent \dimen1
4609
% Now output arg 2 ("Function" or some such)
4610
% ending at \deftypemargin from the right margin,
4611
% but stuck inside a box of width 0 so it does not interfere with linebreaking
4612
{% Adjust \hsize to exclude the ambient margins,
4613
% so that \rightline will obey them.
4614
\advance \hsize by -\dimen2
4615
\rlap{\rightline{{\rm #2}\hskip -1.25pc }}}%
4616
% Make all lines underfull and no complaints:
4617
\tolerance=10000 \hbadness=10000
4618
\advance\leftskip by -\defbodyindent
4619
\exdentamount=\defbodyindent
4620
{\df #1}\enskip % Generate function name
4623
% Actually process the body of a definition
4624
% #1 should be the terminating control sequence, such as \Edefun.
4625
% #2 should be the "another name" control sequence, such as \defunx.
4626
% #3 should be the control sequence that actually processes the header,
4627
% such as \defunheader.
4629
\def\defparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody
4631
% Define the end token that this defining construct specifies
4632
% so that it will exit this group.
4633
\def#1{\endgraf\endgroup\medbreak}%
4634
\def#2{\begingroup\obeylines\activeparens\spacesplit#3}%
4636
\advance\leftskip by \defbodyindent
4637
\exdentamount=\defbodyindent
4639
\catcode 61=\active % 61 is `='
4640
\obeylines\activeparens\spacesplit#3}
4642
% #1 is the \E... control sequence to end the definition (which we define).
4643
% #2 is the \...x control sequence for consecutive fns (which we define).
4644
% #3 is the control sequence to call to resume processing.
4645
% #4, delimited by the space, is the class name.
4647
\def\defmethparsebody#1#2#3#4 {\begingroup\inENV %
4649
% Define the end token that this defining construct specifies
4650
% so that it will exit this group.
4651
\def#1{\endgraf\endgroup\medbreak}%
4652
\def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}%
4654
\advance\leftskip by \defbodyindent
4655
\exdentamount=\defbodyindent
4656
\begingroup\obeylines\activeparens\spacesplit{#3{#4}}}
4658
% Used for @deftypemethod and @deftypeivar.
4659
% #1 is the \E... control sequence to end the definition (which we define).
4660
% #2 is the \...x control sequence for consecutive fns (which we define).
4661
% #3 is the control sequence to call to resume processing.
4662
% #4, delimited by a space, is the class name.
4663
% #5 is the method's return type.
4665
\def\deftypemethparsebody#1#2#3#4 #5 {\begingroup\inENV
4667
\def#1{\endgraf\endgroup\medbreak}%
4668
\def#2##1 ##2 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}{##2}}}%
4670
\advance\leftskip by \defbodyindent
4671
\exdentamount=\defbodyindent
4672
\begingroup\obeylines\activeparens\spacesplit{#3{#4}{#5}}}
4674
% Used for @deftypeop. The change from \deftypemethparsebody is an
4675
% extra argument at the beginning which is the `category', instead of it
4676
% being the hardwired string `Method' or `Instance Variable'. We have
4677
% to account for this both in the \...x definition and in parsing the
4678
% input at hand. Thus also need a control sequence (passed as #5) for
4679
% the \E... definition to assign the category name to.
4681
\def\deftypeopparsebody#1#2#3#4#5 #6 {\begingroup\inENV
4683
\def#1{\endgraf\endgroup\medbreak}%
4684
\def#2##1 ##2 ##3 {%
4686
\begingroup\obeylines\activeparens\spacesplit{#3{##2}{##3}}}%
4688
\advance\leftskip by \defbodyindent
4689
\exdentamount=\defbodyindent
4690
\begingroup\obeylines\activeparens\spacesplit{#3{#5}{#6}}}
4692
\def\defopparsebody #1#2#3#4#5 {\begingroup\inENV %
4694
% Define the end token that this defining construct specifies
4695
% so that it will exit this group.
4696
\def#1{\endgraf\endgroup\medbreak}%
4697
\def#2##1 ##2 {\def#4{##1}%
4698
\begingroup\obeylines\activeparens\spacesplit{#3{##2}}}%
4700
\advance\leftskip by \defbodyindent
4701
\exdentamount=\defbodyindent
4702
\begingroup\obeylines\activeparens\spacesplit{#3{#5}}}
4704
% These parsing functions are similar to the preceding ones
4705
% except that they do not make parens into active characters.
4706
% These are used for "variables" since they have no arguments.
4708
\def\defvarparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody
4710
% Define the end token that this defining construct specifies
4711
% so that it will exit this group.
4712
\def#1{\endgraf\endgroup\medbreak}%
4713
\def#2{\begingroup\obeylines\spacesplit#3}%
4715
\advance\leftskip by \defbodyindent
4716
\exdentamount=\defbodyindent
4718
\catcode 61=\active %
4719
\obeylines\spacesplit#3}
4721
% This is used for \def{tp,vr}parsebody. It could probably be used for
4722
% some of the others, too, with some judicious conditionals.
4724
\def\parsebodycommon#1#2#3{%
4727
% Define the end token that this defining construct specifies
4728
% so that it will exit this group.
4729
\def#1{\endgraf\endgroup\medbreak}%
4730
\def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}%
4732
\advance\leftskip by \defbodyindent
4733
\exdentamount=\defbodyindent
4734
\begingroup\obeylines
4737
\def\defvrparsebody#1#2#3#4 {%
4738
\parsebodycommon{#1}{#2}{#3}%
4739
\spacesplit{#3{#4}}%
4742
% This loses on `@deftp {Data Type} {struct termios}' -- it thinks the
4743
% type is just `struct', because we lose the braces in `{struct
4744
% termios}' when \spacesplit reads its undelimited argument. Sigh.
4745
% \let\deftpparsebody=\defvrparsebody
4747
% So, to get around this, we put \empty in with the type name. That
4748
% way, TeX won't find exactly `{...}' as an undelimited argument, and
4749
% won't strip off the braces.
4751
\def\deftpparsebody #1#2#3#4 {%
4752
\parsebodycommon{#1}{#2}{#3}%
4753
\spacesplit{\parsetpheaderline{#3{#4}}}\empty
4756
% Fine, but then we have to eventually remove the \empty *and* the
4757
% braces (if any). That's what this does.
4759
\def\removeemptybraces\empty#1\relax{#1}
4761
% After \spacesplit has done its work, this is called -- #1 is the final
4762
% thing to call, #2 the type name (which starts with \empty), and #3
4763
% (which might be empty) the arguments.
4765
\def\parsetpheaderline#1#2#3{%
4766
#1{\removeemptybraces#2\relax}{#3}%
4769
\def\defopvarparsebody #1#2#3#4#5 {\begingroup\inENV %
4771
% Define the end token that this defining construct specifies
4772
% so that it will exit this group.
4773
\def#1{\endgraf\endgroup\medbreak}%
4774
\def#2##1 ##2 {\def#4{##1}%
4775
\begingroup\obeylines\spacesplit{#3{##2}}}%
4777
\advance\leftskip by \defbodyindent
4778
\exdentamount=\defbodyindent
4779
\begingroup\obeylines\spacesplit{#3{#5}}}
4781
% Split up #2 at the first space token.
4782
% call #1 with two arguments:
4783
% the first is all of #2 before the space token,
4784
% the second is all of #2 after that space token.
4785
% If #2 contains no space token, all of it is passed as the first arg
4786
% and the second is passed as empty.
4789
\gdef\spacesplit#1#2^^M{\endgroup\spacesplitfoo{#1}#2 \relax\spacesplitfoo}%
4790
\long\gdef\spacesplitfoo#1#2 #3#4\spacesplitfoo{%
4792
#1{#2}{}\else #1{#2}{#3#4}\fi}}
4794
% So much for the things common to all kinds of definitions.
4798
% First, define the processing that is wanted for arguments of \defun
4799
% Use this to expand the args and terminate the paragraph they make up
4801
\def\defunargs#1{\functionparens \sl
4802
% Expand, preventing hyphenation at `-' chars.
4803
% Note that groups don't affect changes in \hyphenchar.
4804
% Set the font temporarily and use \font in case \setfont made \tensl a macro.
4805
{\tensl\hyphenchar\font=0}%
4807
{\tensl\hyphenchar\font=45}%
4808
\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi%
4809
\interlinepenalty=10000
4810
\advance\rightskip by 0pt plus 1fil
4811
\endgraf\nobreak\vskip -\parskip\nobreak
4814
\def\deftypefunargs #1{%
4815
% Expand, preventing hyphenation at `-' chars.
4816
% Note that groups don't affect changes in \hyphenchar.
4817
% Use \boldbraxnoamp, not \functionparens, so that & is not special.
4819
\tclose{#1}% avoid \code because of side effects on active chars
4820
\interlinepenalty=10000
4821
\advance\rightskip by 0pt plus 1fil
4822
\endgraf\nobreak\vskip -\parskip\nobreak
4825
% Do complete processing of one @defun or @defunx line already parsed.
4827
% @deffn Command forward-char nchars
4829
\def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader}
4831
\def\deffnheader #1#2#3{\doind {fn}{\code{#2}}%
4832
\begingroup\defname {#2}{#1}\defunargs{#3}\endgroup %
4833
\catcode 61=\other % Turn off change made in \defparsebody
4836
% @defun == @deffn Function
4838
\def\defun{\defparsebody\Edefun\defunx\defunheader}
4840
\def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
4841
\begingroup\defname {#1}{\putwordDeffunc}%
4842
\defunargs {#2}\endgroup %
4843
\catcode 61=\other % Turn off change made in \defparsebody
4846
% @deftypefun int foobar (int @var{foo}, float @var{bar})
4848
\def\deftypefun{\defparsebody\Edeftypefun\deftypefunx\deftypefunheader}
4850
% #1 is the data type. #2 is the name and args.
4851
\def\deftypefunheader #1#2{\deftypefunheaderx{#1}#2 \relax}
4852
% #1 is the data type, #2 the name, #3 the args.
4853
\def\deftypefunheaderx #1#2 #3\relax{%
4854
\doind {fn}{\code{#2}}% Make entry in function index
4855
\begingroup\defname {\defheaderxcond#1\relax$$$#2}{\putwordDeftypefun}%
4856
\deftypefunargs {#3}\endgroup %
4857
\catcode 61=\other % Turn off change made in \defparsebody
4860
% @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar})
4862
\def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader}
4864
% \defheaderxcond#1\relax$$$
4865
% puts #1 in @code, followed by a space, but does nothing if #1 is null.
4866
\def\defheaderxcond#1#2$$${\ifx#1\relax\else\code{#1#2} \fi}
4868
% #1 is the classification. #2 is the data type. #3 is the name and args.
4869
\def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax}
4870
% #1 is the classification, #2 the data type, #3 the name, #4 the args.
4871
\def\deftypefnheaderx #1#2#3 #4\relax{%
4872
\doind {fn}{\code{#3}}% Make entry in function index
4874
\normalparens % notably, turn off `&' magic, which prevents
4875
% at least some C++ text from working
4876
\defname {\defheaderxcond#2\relax$$$#3}{#1}%
4877
\deftypefunargs {#4}\endgroup %
4878
\catcode 61=\other % Turn off change made in \defparsebody
4881
% @defmac == @deffn Macro
4883
\def\defmac{\defparsebody\Edefmac\defmacx\defmacheader}
4885
\def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
4886
\begingroup\defname {#1}{\putwordDefmac}%
4887
\defunargs {#2}\endgroup %
4888
\catcode 61=\other % Turn off change made in \defparsebody
4891
% @defspec == @deffn Special Form
4893
\def\defspec{\defparsebody\Edefspec\defspecx\defspecheader}
4895
\def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
4896
\begingroup\defname {#1}{\putwordDefspec}%
4897
\defunargs {#2}\endgroup %
4898
\catcode 61=\other % Turn off change made in \defparsebody
4901
% @defop CATEGORY CLASS OPERATION ARG...
4903
\def\defop #1 {\def\defoptype{#1}%
4904
\defopparsebody\Edefop\defopx\defopheader\defoptype}
4906
\def\defopheader#1#2#3{%
4907
\dosubind {fn}{\code{#2}}{\putwordon\ #1}% Make entry in function index
4908
\begingroup\defname {#2}{\defoptype\ \putwordon\ #1}%
4909
\defunargs {#3}\endgroup %
4912
% @deftypeop CATEGORY CLASS TYPE OPERATION ARG...
4914
\def\deftypeop #1 {\def\deftypeopcategory{#1}%
4915
\deftypeopparsebody\Edeftypeop\deftypeopx\deftypeopheader
4918
% #1 is the class name, #2 the data type, #3 the operation name, #4 the args.
4919
\def\deftypeopheader#1#2#3#4{%
4920
\dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
4922
\defname{\defheaderxcond#2\relax$$$#3}
4923
{\deftypeopcategory\ \putwordon\ \code{#1}}%
4924
\deftypefunargs{#4}%
4928
% @deftypemethod CLASS TYPE METHOD ARG...
4930
\def\deftypemethod{%
4931
\deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
4933
% #1 is the class name, #2 the data type, #3 the method name, #4 the args.
4934
\def\deftypemethodheader#1#2#3#4{%
4935
\dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
4937
\defname{\defheaderxcond#2\relax$$$#3}{\putwordMethodon\ \code{#1}}%
4938
\deftypefunargs{#4}%
4942
% @deftypeivar CLASS TYPE VARNAME
4945
\deftypemethparsebody\Edeftypeivar\deftypeivarx\deftypeivarheader}
4947
% #1 is the class name, #2 the data type, #3 the variable name.
4948
\def\deftypeivarheader#1#2#3{%
4949
\dosubind{vr}{\code{#3}}{\putwordof\ \code{#1}}% entry in variable index
4951
\defname{\defheaderxcond#2\relax$$$#3}
4952
{\putwordInstanceVariableof\ \code{#1}}%
4957
% @defmethod == @defop Method
4959
\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
4961
% #1 is the class name, #2 the method name, #3 the args.
4962
\def\defmethodheader#1#2#3{%
4963
\dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% entry in function index
4965
\defname{#2}{\putwordMethodon\ \code{#1}}%
4970
% @defcv {Class Option} foo-class foo-flag
4972
\def\defcv #1 {\def\defcvtype{#1}%
4973
\defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype}
4975
\def\defcvarheader #1#2#3{%
4976
\dosubind {vr}{\code{#2}}{\putwordof\ #1}% Make entry in var index
4977
\begingroup\defname {#2}{\defcvtype\ \putwordof\ #1}%
4978
\defvarargs {#3}\endgroup %
4981
% @defivar CLASS VARNAME == @defcv {Instance Variable} CLASS VARNAME
4983
\def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader}
4985
\def\defivarheader#1#2#3{%
4986
\dosubind {vr}{\code{#2}}{\putwordof\ #1}% entry in var index
4988
\defname{#2}{\putwordInstanceVariableof\ #1}%
4994
% First, define the processing that is wanted for arguments of @defvar.
4995
% This is actually simple: just print them in roman.
4996
% This must expand the args and terminate the paragraph they make up
4997
\def\defvarargs #1{\normalparens #1%
4998
\interlinepenalty=10000
4999
\endgraf\nobreak\vskip -\parskip\nobreak}
5001
% @defvr Counter foo-count
5003
\def\defvr{\defvrparsebody\Edefvr\defvrx\defvrheader}
5005
\def\defvrheader #1#2#3{\doind {vr}{\code{#2}}%
5006
\begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup}
5008
% @defvar == @defvr Variable
5010
\def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader}
5012
\def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
5013
\begingroup\defname {#1}{\putwordDefvar}%
5014
\defvarargs {#2}\endgroup %
5017
% @defopt == @defvr {User Option}
5019
\def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader}
5021
\def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
5022
\begingroup\defname {#1}{\putwordDefopt}%
5023
\defvarargs {#2}\endgroup %
5026
% @deftypevar int foobar
5028
\def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader}
5030
% #1 is the data type. #2 is the name, perhaps followed by text that
5031
% is actually part of the data type, which should not be put into the index.
5032
\def\deftypevarheader #1#2{%
5033
\dovarind#2 \relax% Make entry in variables index
5034
\begingroup\defname {\defheaderxcond#1\relax$$$#2}{\putwordDeftypevar}%
5035
\interlinepenalty=10000
5036
\endgraf\nobreak\vskip -\parskip\nobreak
5038
\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}}
5040
% @deftypevr {Global Flag} int enable
5042
\def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader}
5044
\def\deftypevrheader #1#2#3{\dovarind#3 \relax%
5045
\begingroup\defname {\defheaderxcond#2\relax$$$#3}{#1}
5046
\interlinepenalty=10000
5047
\endgraf\nobreak\vskip -\parskip\nobreak
5051
% Args are printed in bold, a slight difference from @defvar.
5053
\def\deftpargs #1{\bf \defvarargs{#1}}
5055
% @deftp Class window height width ...
5057
\def\deftp{\deftpparsebody\Edeftp\deftpx\deftpheader}
5059
\def\deftpheader #1#2#3{\doind {tp}{\code{#2}}%
5060
\begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup}
5062
% These definitions are used if you use @defunx (etc.)
5063
% anywhere other than immediately after a @defun or @defunx.
5065
\def\defcvx#1 {\errmessage{@defcvx in invalid context}}
5066
\def\deffnx#1 {\errmessage{@deffnx in invalid context}}
5067
\def\defivarx#1 {\errmessage{@defivarx in invalid context}}
5068
\def\defmacx#1 {\errmessage{@defmacx in invalid context}}
5069
\def\defmethodx#1 {\errmessage{@defmethodx in invalid context}}
5070
\def\defoptx #1 {\errmessage{@defoptx in invalid context}}
5071
\def\defopx#1 {\errmessage{@defopx in invalid context}}
5072
\def\defspecx#1 {\errmessage{@defspecx in invalid context}}
5073
\def\deftpx#1 {\errmessage{@deftpx in invalid context}}
5074
\def\deftypefnx#1 {\errmessage{@deftypefnx in invalid context}}
5075
\def\deftypefunx#1 {\errmessage{@deftypefunx in invalid context}}
5076
\def\deftypeivarx#1 {\errmessage{@deftypeivarx in invalid context}}
5077
\def\deftypemethodx#1 {\errmessage{@deftypemethodx in invalid context}}
5078
\def\deftypeopx#1 {\errmessage{@deftypeopx in invalid context}}
5079
\def\deftypevarx#1 {\errmessage{@deftypevarx in invalid context}}
5080
\def\deftypevrx#1 {\errmessage{@deftypevrx in invalid context}}
5081
\def\defunx#1 {\errmessage{@defunx in invalid context}}
5082
\def\defvarx#1 {\errmessage{@defvarx in invalid context}}
5083
\def\defvrx#1 {\errmessage{@defvrx in invalid context}}
5089
% To do this right we need a feature of e-TeX, \scantokens,
5090
% which we arrange to emulate with a temporary file in ordinary TeX.
5091
\ifx\eTeXversion\undefined
5092
\newwrite\macscribble
5094
\begingroup \newlinechar`\^^M
5095
% Undo catcode changes of \startcontents and \doprintindex
5096
\catcode`\@=0 \catcode`\\=12 \escapechar=`\@
5097
% Append \endinput to make sure that TeX does not see the ending newline.
5098
\toks0={#1\endinput}%
5099
\immediate\openout\macscribble=\jobname.tmp
5100
\immediate\write\macscribble{\the\toks0}%
5101
\immediate\closeout\macscribble
5102
\let\xeatspaces\eatspaces
5108
\begingroup \newlinechar`\^^M
5109
% Undo catcode changes of \startcontents and \doprintindex
5110
\catcode`\@=0 \catcode`\\=12 \escapechar=`\@
5111
\let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup}
5114
\newcount\paramno % Count of parameters
5115
\newtoks\macname % Macro name
5116
\newif\ifrecursive % Is it recursive?
5117
\def\macrolist{} % List of all defined macros in the form
5118
% \do\macro1\do\macro2...
5121
% Thisdoes \let #1 = #2, except with \csnames.
5123
\expandafter\expandafter
5125
\expandafter\expandafter
5127
\csname#2\endcsname}
5129
% Trim leading and trailing spaces off a string.
5130
% Concepts from aro-bend problem 15 (see CTAN).
5132
\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
5133
\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
5134
\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
5136
\unbrace{\gdef\trim@@@ #1 } #2@{#1}
5139
% Trim a single trailing ^^M off a string.
5140
{\catcode`\^^M=12\catcode`\Q=3%
5141
\gdef\eatcr #1{\eatcra #1Q^^MQ}%
5142
\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
5143
\gdef\eatcrb#1Q#2Q{#1}%
5146
% Macro bodies are absorbed as an argument in a context where
5147
% all characters are catcode 10, 11 or 12, except \ which is active
5148
% (as in normal texinfo). It is necessary to change the definition of \.
5150
% It's necessary to have hard CRs when the macro is executed. This is
5151
% done by making ^^M (\endlinechar) catcode 12 when reading the macro
5152
% body, and then making it the \newlinechar in \scanmacro.
5154
\def\macrobodyctxt{%
5179
% \mbodybackslash is the definition of \ in @macro bodies.
5180
% It maps \foo\ => \csname macarg.foo\endcsname => #N
5181
% where N is the macro parameter number.
5182
% We define \csname macarg.\endcsname to be \realbackslash, so
5183
% \\ in macro replacement text gets you a backslash.
5185
{\catcode`@=0 @catcode`@\=@active
5186
@gdef@usembodybackslash{@let\=@mbodybackslash}
5187
@gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
5189
\expandafter\def\csname macarg.\endcsname{\realbackslash}
5191
\def\macro{\recursivefalse\parsearg\macroxxx}
5192
\def\rmacro{\recursivetrue\parsearg\macroxxx}
5195
\getargs{#1}% now \macname is the macname and \argl the arglist
5196
\ifx\argl\empty % no arguments
5199
\expandafter\parsemargdef \argl;%
5201
\if1\csname ismacro.\the\macname\endcsname
5202
\message{Warning: redefining \the\macname}%
5204
\expandafter\ifx\csname \the\macname\endcsname \relax
5205
\else \errmessage{The name \the\macname\space is reserved}\fi
5206
\global\cslet{macsave.\the\macname}{\the\macname}%
5207
\global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
5208
% Add the macroname to \macrolist
5209
\toks0 = \expandafter{\macrolist\do}%
5210
\xdef\macrolist{\the\toks0
5211
\expandafter\noexpand\csname\the\macname\endcsname}%
5213
\begingroup \macrobodyctxt
5214
\ifrecursive \expandafter\parsermacbody
5215
\else \expandafter\parsemacbody
5218
\def\unmacro{\parsearg\unmacroxxx}
5220
\if1\csname ismacro.#1\endcsname
5221
\global\cslet{#1}{macsave.#1}%
5222
\global\expandafter\let \csname ismacro.#1\endcsname=0%
5223
% Remove the macro name from \macrolist
5225
\edef\tempa{\expandafter\noexpand\csname#1\endcsname}%
5231
\toks0 = \expandafter{\newmacrolist\do}%
5232
\edef\newmacrolist{\the\toks0\expandafter\noexpand\tempa}%
5234
\def\newmacrolist{}%
5235
% Execute macro list to define \newmacrolist
5237
\global\let\macrolist\newmacrolist
5240
\errmessage{Macro #1 not defined}%
5244
% This makes use of the obscure feature that if the last token of a
5245
% <parameter list> is #, then the preceding argument is delimited by
5246
% an opening brace, and that opening brace is not consumed.
5247
\def\getargs#1{\getargsxxx#1{}}
5248
\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
5249
\def\getmacname #1 #2\relax{\macname={#1}}
5250
\def\getmacargs#1{\def\argl{#1}}
5252
% Parse the optional {params} list. Set up \paramno and \paramlist
5253
% so \defmacro knows what to do. Define \macarg.blah for each blah
5254
% in the params list, to be ##N where N is the position in that list.
5255
% That gets used by \mbodybackslash (above).
5257
% We need to get `macro parameter char #' into several definitions.
5258
% The technique used is stolen from LaTeX: let \hash be something
5259
% unexpandable, insert that wherever you need a #, and then redefine
5260
% it to # just before using the token list produced.
5262
% The same technique is used to protect \eatspaces till just before
5263
% the macro is used.
5265
\def\parsemargdef#1;{\paramno=0\def\paramlist{}%
5266
\let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,}
5267
\def\parsemargdefxxx#1,{%
5268
\if#1;\let\next=\relax
5269
\else \let\next=\parsemargdefxxx
5270
\advance\paramno by 1%
5271
\expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
5272
{\xeatspaces{\hash\the\paramno}}%
5273
\edef\paramlist{\paramlist\hash\the\paramno,}%
5276
% These two commands read recursive and nonrecursive macro bodies.
5277
% (They're different since rec and nonrec macros end differently.)
5279
\long\def\parsemacbody#1@end macro%
5280
{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
5281
\long\def\parsermacbody#1@end rmacro%
5282
{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
5284
% This defines the macro itself. There are six cases: recursive and
5285
% nonrecursive macros of zero, one, and many arguments.
5286
% Much magic with \expandafter here.
5287
% \xdef is used so that macro definitions will survive the file
5288
% they're defined in; @include reads the file inside a group.
5290
\let\hash=##% convert placeholders to macro parameter chars
5294
\expandafter\xdef\csname\the\macname\endcsname{%
5295
\noexpand\scanmacro{\temp}}%
5297
\expandafter\xdef\csname\the\macname\endcsname{%
5298
\bgroup\noexpand\macroargctxt
5299
\noexpand\braceorline
5300
\expandafter\noexpand\csname\the\macname xxx\endcsname}%
5301
\expandafter\xdef\csname\the\macname xxx\endcsname##1{%
5302
\egroup\noexpand\scanmacro{\temp}}%
5304
\expandafter\xdef\csname\the\macname\endcsname{%
5305
\bgroup\noexpand\macroargctxt
5306
\noexpand\csname\the\macname xx\endcsname}%
5307
\expandafter\xdef\csname\the\macname xx\endcsname##1{%
5308
\expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
5309
\expandafter\expandafter
5311
\expandafter\expandafter
5312
\csname\the\macname xxx\endcsname
5313
\paramlist{\egroup\noexpand\scanmacro{\temp}}%
5318
\expandafter\xdef\csname\the\macname\endcsname{%
5319
\noexpand\norecurse{\the\macname}%
5320
\noexpand\scanmacro{\temp}\egroup}%
5322
\expandafter\xdef\csname\the\macname\endcsname{%
5323
\bgroup\noexpand\macroargctxt
5324
\noexpand\braceorline
5325
\expandafter\noexpand\csname\the\macname xxx\endcsname}%
5326
\expandafter\xdef\csname\the\macname xxx\endcsname##1{%
5328
\noexpand\norecurse{\the\macname}%
5329
\noexpand\scanmacro{\temp}\egroup}%
5331
\expandafter\xdef\csname\the\macname\endcsname{%
5332
\bgroup\noexpand\macroargctxt
5333
\expandafter\noexpand\csname\the\macname xx\endcsname}%
5334
\expandafter\xdef\csname\the\macname xx\endcsname##1{%
5335
\expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
5336
\expandafter\expandafter
5338
\expandafter\expandafter
5339
\csname\the\macname xxx\endcsname
5342
\noexpand\norecurse{\the\macname}%
5343
\noexpand\scanmacro{\temp}\egroup}%
5347
\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
5349
% \braceorline decides whether the next nonwhitespace character is a
5350
% {. If so it reads up to the closing }, if not, it reads the whole
5351
% line. Whatever was read is then fed to the next control sequence
5352
% as an argument (by \parsebrace or \parsearg)
5353
\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
5354
\def\braceorlinexxx{%
5355
\ifx\nchar\bgroup\else
5356
\expandafter\parsearg
5359
% We mant to disable all macros during \shipout so that they are not
5360
% expanded by \write.
5361
\def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}%
5362
\edef\next{\macrolist}\expandafter\endgroup\next}
5366
% We need some trickery to remove the optional spaces around the equal
5367
% sign. Just make them active and then expand them all to nothing.
5368
\def\alias{\begingroup\obeyspaces\parsearg\aliasxxx}
5369
\def\aliasxxx #1{\aliasyyy#1\relax}
5370
\def\aliasyyy #1=#2\relax{\ignoreactivespaces
5371
\edef\next{\global\let\expandafter\noexpand\csname#1\endcsname=%
5372
\expandafter\noexpand\csname#2\endcsname}%
5373
\expandafter\endgroup\next}
5376
\message{cross references,}
5381
\newif\ifhavexrefs % True if xref values are known.
5382
\newif\ifwarnedxrefs % True if we warned once that they aren't known.
5384
% @inforef is relatively simple.
5385
\def\inforef #1{\inforefzzz #1,,,,**}
5386
\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
5387
node \samp{\ignorespaces#1{}}}
5389
% @node's job is to define \lastnode.
5390
\def\node{\ENVcheck\parsearg\nodezzz}
5391
\def\nodezzz#1{\nodexxx [#1,]}
5392
\def\nodexxx[#1,#2]{\gdef\lastnode{#1}}
5394
\let\lastnode=\relax
5396
% The sectioning commands (@chapter, etc.) call these.
5398
\ifx\lastnode\relax\else
5399
\expandafter\expandafter\expandafter\setref{\lastnode}%
5400
{Ysectionnumberandtype}%
5401
\global\let\lastnode=\relax
5404
\def\unnumbnoderef{%
5405
\ifx\lastnode\relax\else
5406
\expandafter\expandafter\expandafter\setref{\lastnode}{Ynothing}%
5407
\global\let\lastnode=\relax
5410
\def\appendixnoderef{%
5411
\ifx\lastnode\relax\else
5412
\expandafter\expandafter\expandafter\setref{\lastnode}%
5413
{Yappendixletterandtype}%
5414
\global\let\lastnode=\relax
5419
% @anchor{NAME} -- define xref target at arbitrary point.
5421
\newcount\savesfregister
5422
\gdef\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
5423
\gdef\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
5424
\gdef\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
5426
% \setref{NAME}{SNT} defines a cross-reference point NAME, namely
5427
% NAME-title, NAME-pg, and NAME-SNT. Called from \foonoderef. We have
5428
% to set \indexdummies so commands such as @code in a section title
5429
% aren't expanded. It would be nicer not to expand the titles in the
5430
% first place, but there's so many layers that that is hard to do.
5435
\dosetq{#1-title}{Ytitle}%
5436
\dosetq{#1-pg}{Ypagenumber}%
5437
\dosetq{#1-snt}{#2}%
5440
% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
5441
% the node name, #2 the name of the Info cross-reference, #3 the printed
5442
% node name, #4 the name of the Info file, #5 the name of the printed
5443
% manual. All but the node name can be omitted.
5445
\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
5446
\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
5447
\def\ref#1{\xrefX[#1,,,,,,,]}
5448
\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
5450
\def\printedmanual{\ignorespaces #5}%
5451
\def\printednodename{\ignorespaces #3}%
5452
\setbox1=\hbox{\printedmanual}%
5453
\setbox0=\hbox{\printednodename}%
5455
% No printed node name was explicitly given.
5456
\expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
5457
% Use the node name inside the square brackets.
5458
\def\printednodename{\ignorespaces #1}%
5460
% Use the actual chapter/section title appear inside
5461
% the square brackets. Use the real section title if we have it.
5463
% It is in another manual, so we don't have it.
5464
\def\printednodename{\ignorespaces #1}%
5467
% We know the real title if we have the xref values.
5468
\def\printednodename{\refx{#1-title}{}}%
5470
% Otherwise just copy the Info node name.
5471
\def\printednodename{\ignorespaces #1}%
5477
% If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
5478
% insert empty discretionaries after hyphens, which means that it will
5479
% not find a line break at a hyphen in a node names. Since some manuals
5480
% are best written with fairly long node names, containing hyphens, this
5481
% is a loss. Therefore, we give the text of the node name again, so it
5482
% is as if TeX is seeing it for the first time.
5486
\ifnum\filenamelength>0
5487
\startlink attr{/Border [0 0 0]}%
5488
goto file{\the\filename.pdf} name{#1@}%
5490
\startlink attr{/Border [0 0 0]}%
5497
\putwordsection{} ``\printednodename'' \putwordin{} \cite{\printedmanual}%
5499
% _ (for example) has to be the character _ for the purposes of the
5500
% control sequence corresponding to the node, but it has to expand
5501
% into the usual \leavevmode...\vrule stuff for purposes of
5502
% printing. So we \turnoffactive for the \refx-snt, back on for the
5503
% printing, back off for the \refx-pg.
5504
{\normalturnoffactive
5505
% Only output a following space if the -snt ref is nonempty; for
5506
% @unnumbered and @anchor, it won't be.
5507
\setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
5508
\ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
5511
[\printednodename],\space
5513
\turnoffactive \putwordpage\tie\refx{#1-pg}{}%
5518
% \dosetq is the interface for calls from other macros
5520
% Use \normalturnoffactive so that punctuation chars such as underscore
5521
% and backslash work in node names. (\turnoffactive doesn't do \.)
5524
\normalturnoffactive
5525
\edef\next{\write\auxfile{\internalsetq{#1}{#2}}}%
5532
% \internalsetq {foo}{page} expands into
5533
% CHARACTERS 'xrdef {foo}{...expansion of \Ypage...}
5534
% When the aux file is read, ' is the escape character
5536
\def\internalsetq #1#2{'xrdef {#1}{\csname #2\endcsname}}
5538
% Things to be expanded by \internalsetq
5540
\def\Ypagenumber{\folio}
5542
\def\Ytitle{\thissection}
5546
\def\Ysectionnumberandtype{%
5547
\ifnum\secno=0 \putwordChapter\xreftie\the\chapno %
5548
\else \ifnum \subsecno=0 \putwordSection\xreftie\the\chapno.\the\secno %
5549
\else \ifnum \subsubsecno=0 %
5550
\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno %
5552
\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno %
5555
\def\Yappendixletterandtype{%
5556
\ifnum\secno=0 \putwordAppendix\xreftie'char\the\appendixno{}%
5557
\else \ifnum \subsecno=0 \putwordSection\xreftie'char\the\appendixno.\the\secno %
5558
\else \ifnum \subsubsecno=0 %
5559
\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno %
5561
\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno %
5566
% Use TeX 3.0's \inputlineno to get the line number, for better error
5567
% messages, but if we're using an old version of TeX, don't do anything.
5569
\ifx\inputlineno\thisisundefined
5570
\let\linenumber = \empty % Non-3.0.
5572
\def\linenumber{\the\inputlineno:\space}
5575
% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
5576
% If its value is nonempty, SUFFIX is output afterward.
5579
\expandafter\ifx\csname X#1\endcsname\relax
5580
% If not defined, say something at least.
5581
\angleleft un\-de\-fined\angleright
5584
\message{\linenumber Undefined cross reference `#1'.}%
5587
\global\warnedxrefstrue
5588
\message{Cross reference values unknown; you must run TeX again.}%
5593
% It's defined, so just use it.
5594
\csname X#1\endcsname
5596
#2% Output the suffix in any case.
5599
% This is the macro invoked by entries in the aux file.
5601
\def\xrdef#1{\begingroup
5602
% Reenable \ as an escape while reading the second argument.
5604
\afterassignment\endgroup
5605
\expandafter\gdef\csname X#1\endcsname
5608
% Read the last existing aux file, if any. No error if none exists.
5609
\def\readauxfile{\begingroup
5610
\catcode`\^^@=\other
5611
\catcode`\^^A=\other
5612
\catcode`\^^B=\other
5613
\catcode`\^^C=\other
5614
\catcode`\^^D=\other
5615
\catcode`\^^E=\other
5616
\catcode`\^^F=\other
5617
\catcode`\^^G=\other
5618
\catcode`\^^H=\other
5619
\catcode`\^^K=\other
5620
\catcode`\^^L=\other
5621
\catcode`\^^N=\other
5622
\catcode`\^^P=\other
5623
\catcode`\^^Q=\other
5624
\catcode`\^^R=\other
5625
\catcode`\^^S=\other
5626
\catcode`\^^T=\other
5627
\catcode`\^^U=\other
5628
\catcode`\^^V=\other
5629
\catcode`\^^W=\other
5630
\catcode`\^^X=\other
5631
\catcode`\^^Z=\other
5632
\catcode`\^^[=\other
5633
\catcode`\^^\=\other
5634
\catcode`\^^]=\other
5635
\catcode`\^^^=\other
5636
\catcode`\^^_=\other
5639
% It was suggested to define this as 7, which would allow ^^e4 etc.
5640
% in xref tags, i.e., node names. But since ^^e4 notation isn't
5641
% supported in the main text, it doesn't seem desirable. Furthermore,
5642
% that is not enough: for node names that actually contain a ^
5643
% character, we would end up writing a line like this: 'xrdef {'hat
5644
% b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
5645
% argument, and \hat is not an expandable control sequence. It could
5646
% all be worked out, but why? Either we support ^^ or we don't.
5648
% The other change necessary for this was to define \auxhat:
5649
% \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
5650
% and then to call \auxhat in \setq.
5663
\catcode`+=\other % avoid \+ for paranoia even though we've turned it off
5664
% Make the characters 128-255 be printing characters
5668
\catcode\count 1=\other
5669
\advance\count 1 by 1
5670
\ifnum \count 1<256 \loop \fi
5673
% The aux file uses ' as the escape (for now).
5674
% Turn off \ as an escape so we do not lose on
5675
% entries which were dumped with control sequences in their names.
5676
% For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^
5677
% Reference to such entries still does not work the way one would wish,
5678
% but at least they do not bomb out when the aux file is read in.
5685
\openin 1 \jobname.aux
5689
\global\havexrefstrue
5690
\global\warnedobstrue
5692
% Open the new aux file. TeX will close it automatically at exit.
5693
\openout\auxfile=\jobname.aux
5699
\newcount \footnoteno
5701
% The trailing space in the following definition for supereject is
5702
% vital for proper filling; pages come out unaligned when you do a
5703
% pagealignmacro call if that space before the closing brace is
5704
% removed. (Generally, numeric constants should always be followed by a
5705
% space to prevent strange expansion errors.)
5706
\def\supereject{\par\penalty -20000\footnoteno =0 }
5708
% @footnotestyle is meaningful for info output only.
5709
\let\footnotestyle=\comment
5711
\let\ptexfootnote=\footnote
5715
% Auto-number footnotes. Otherwise like plain.
5717
\global\advance\footnoteno by \@ne
5718
\edef\thisfootno{$^{\the\footnoteno}$}%
5720
% In case the footnote comes at the end of a sentence, preserve the
5721
% extra spacing after we do the footnote number.
5723
\ifhmode\edef\@sf{\spacefactor\the\spacefactor}\/\fi
5725
% Remove inadvertent blank space before typesetting the footnote number.
5731
% Don't bother with the trickery in plain.tex to not require the
5732
% footnote text as a parameter. Our footnotes don't need to be so general.
5734
% Oh yes, they do; otherwise, @ifset and anything else that uses
5735
% \parseargline fail inside footnotes because the tokens are fixed when
5736
% the footnote is read. --karl, 16nov96.
5738
\long\gdef\footnotezzz{\insert\footins\bgroup
5739
% We want to typeset this text as a normal paragraph, even if the
5740
% footnote reference occurs in (for example) a display environment.
5741
% So reset some parameters.
5742
\interlinepenalty\interfootnotelinepenalty
5743
\splittopskip\ht\strutbox % top baseline for broken footnotes
5744
\splitmaxdepth\dp\strutbox
5745
\floatingpenalty\@MM
5750
\parindent\defaultparindent
5754
% Hang the footnote text off the number.
5756
\textindent{\thisfootno}%
5758
% Don't crash into the line above the footnote text. Since this
5759
% expands into a box, it must come within the paragraph, lest it
5760
% provide a place where TeX can split the footnote.
5762
\futurelet\next\fo@t
5764
\def\fo@t{\ifcat\bgroup\noexpand\next \let\next\f@@t
5765
\else\let\next\f@t\fi \next}
5766
\def\f@@t{\bgroup\aftergroup\@foot\let\next}
5767
\def\f@t#1{#1\@foot}
5768
\def\@foot{\strut\par\egroup}
5770
}%end \catcode `\@=11
5772
% Set the baselineskip to #1, and the lineskip and strut size
5773
% correspondingly. There is no deep meaning behind these magic numbers
5774
% used as factors; they just match (closely enough) what Knuth defined.
5776
\def\lineskipfactor{.08333}
5777
\def\strutheightpercent{.70833}
5778
\def\strutdepthpercent {.29167}
5781
\normalbaselineskip = #1\relax
5782
\normallineskip = \lineskipfactor\normalbaselineskip
5784
\setbox\strutbox =\hbox{%
5785
\vrule width0pt height\strutheightpercent\baselineskip
5786
depth \strutdepthpercent \baselineskip
5790
% @| inserts a changebar to the left of the current line. It should
5791
% surround any changed text. This approach does *not* work if the
5792
% change spans more than two lines of output. To handle that, we would
5793
% have adopt a much more difficult approach (putting marks into the main
5794
% vertical list for the beginning and end of each change).
5797
% \vadjust can only be used in horizontal mode.
5800
% Append this vertical mode material after the current line in the output.
5802
% We want to insert a rule with the height and depth of the current
5803
% leading; that is exactly what \strutbox is supposed to record.
5804
\vskip-\baselineskip
5806
% \vadjust-items are inserted at the left edge of the type. So
5807
% the \llap here moves out into the left-hand margin.
5810
% For a thicker or thinner bar, change the `1pt'.
5811
\vrule height\baselineskip width1pt
5813
% This is the space between the bar and the text.
5819
% For a final copy, take out the rectangles
5820
% that mark overfull boxes (in case you have decided
5821
% that the text looks ok even though it passes the margin).
5823
\def\finalout{\overfullrule=0pt}
5825
% @image. We use the macros from epsf.tex to support this.
5826
% If epsf.tex is not installed and @image is used, we complain.
5828
% Check for and read epsf.tex up front. If we read it only at @image
5829
% time, we might be inside a group, and then its definitions would get
5830
% undone and the next image would fail.
5831
\openin 1 = epsf.tex
5834
% Do not bother showing banner with post-v2.7 epsf.tex (available in
5835
% doc/epsf.tex until it shows up on ctan).
5836
\def\epsfannounce{\toks0 = }%
5840
% We will only complain once about lack of epsf.tex.
5841
\newif\ifwarnednoepsf
5842
\newhelp\noepsfhelp{epsf.tex must be installed for images to
5843
work. It is also included in the Texinfo distribution, or you can get
5844
it from ftp://tug.org/tex/epsf.tex.}
5847
\ifx\epsfbox\undefined
5848
\ifwarnednoepsf \else
5849
\errhelp = \noepsfhelp
5850
\errmessage{epsf.tex not found, images will be ignored}%
5851
\global\warnednoepsftrue
5854
\imagexxx #1,,,\finish
5858
% Arguments to @image:
5859
% #1 is (mandatory) image filename; we tack on .eps extension.
5860
% #2 is (optional) width, #3 is (optional) height.
5861
% #4 is just the usual extra ignored arg for parsing this stuff.
5862
\def\imagexxx#1,#2,#3,#4\finish{%
5864
\centerline{\dopdfimage{#1}{#2}{#3}}%
5866
% \epsfbox itself resets \epsf?size at each figure.
5867
\setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
5868
\setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
5870
\catcode`\^^M = 5 % in case we're inside an example
5871
\normalturnoffactive % allow _ et al. in names
5872
% If the image is by itself, center it.
5875
% Usually we'll have text after the image which will insert
5876
% \parskip glue, so insert it here too to equalize the space
5878
\nobreak\vskip\parskip
5880
\centerline{\epsfbox{#1.eps}}%
5883
% In the middle of a paragraph, no extra space.
5891
\message{localization,}
5894
% @documentlanguage is usually given very early, just after
5895
% @setfilename. If done too late, it may not override everything
5896
% properly. Single argument is the language abbreviation.
5897
% It would be nice if we could set up a hyphenation file here.
5899
\def\documentlanguage{\parsearg\dodocumentlanguage}
5900
\def\dodocumentlanguage#1{%
5901
\tex % read txi-??.tex file in plain TeX.
5902
% Read the file if it exists.
5903
\openin 1 txi-#1.tex
5905
\errhelp = \nolanghelp
5906
\errmessage{Cannot read language file txi-#1.tex}%
5909
\def\temp{\input txi-#1.tex }%
5914
\newhelp\nolanghelp{The given language definition file cannot be found or
5915
is empty. Maybe you need to install it? In the current directory
5916
should work if nowhere else does.}
5919
% @documentencoding should change something in TeX eventually, most
5920
% likely, but for now just recognize it.
5921
\let\documentencoding = \comment
5924
% Page size parameters.
5926
\newdimen\defaultparindent \defaultparindent = 15pt
5928
\chapheadingskip = 15pt plus 4pt minus 2pt
5929
\secheadingskip = 12pt plus 3pt minus 2pt
5930
\subsecheadingskip = 9pt plus 2pt minus 2pt
5932
% Prevent underfull vbox error messages.
5935
% Don't be so finicky about underfull hboxes, either.
5938
% Following George Bush, just get rid of widows and orphans.
5942
% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
5943
% using an old version of TeX, don't do anything. We want the amount of
5944
% stretch added to depend on the line length, hence the dependence on
5945
% \hsize. We call this whenever the paper size is set.
5947
\def\setemergencystretch{%
5948
\ifx\emergencystretch\thisisundefined
5949
% Allow us to assign to \emergencystretch anyway.
5950
\def\emergencystretch{\dimen0}%
5952
\emergencystretch = .15\hsize
5956
% Parameters in order: 1) textheight; 2) textwidth; 3) voffset;
5957
% 4) hoffset; 5) binding offset; 6) topskip. Then whoever calls us can
5958
% set \parskip and call \setleading for \baselineskip.
5960
\def\internalpagesizes#1#2#3#4#5#6{%
5963
\splittopskip = \topskip
5966
\advance\vsize by \topskip
5967
\outervsize = \vsize
5968
\advance\outervsize by 2\topandbottommargin
5969
\pageheight = \vsize
5972
\outerhsize = \hsize
5973
\advance\outerhsize by 0.5in
5976
\normaloffset = #4\relax
5977
\bindingoffset = #5\relax
5979
\parindent = \defaultparindent
5980
\setemergencystretch
5983
% Use `small' versions.
5985
\def\smallenvironments{%
5986
\let\smalldisplay = \smalldisplayx
5987
\let\smallexample = \smalllispx
5988
\let\smallformat = \smallformatx
5989
\let\smalllisp = \smalllispx
5992
% @letterpaper (the default).
5993
\def\letterpaper{{\globaldefs = 1
5994
\parskip = 3pt plus 2pt minus 1pt
5995
\setleading{13.2pt}%
5997
% If page is nothing but text, make it come out even.
5998
\internalpagesizes{46\baselineskip}{6in}{\voffset}{.25in}{\bindingoffset}{36pt}%
6001
% Use @smallbook to reset parameters for 7x9.5 (or so) format.
6002
\def\smallbook{{\globaldefs = 1
6003
\parskip = 2pt plus 1pt
6006
\internalpagesizes{7.5in}{5.in}{\voffset}{.25in}{\bindingoffset}{16pt}%
6008
\lispnarrowing = 0.3in
6011
\contentsrightmargin = 0pt
6012
\deftypemargin = 0pt
6013
\defbodyindent = .5cm
6017
% Use @afourpaper to print on European A4 paper.
6018
\def\afourpaper{{\globaldefs = 1
6020
\parskip = 3pt plus 2pt minus 1pt
6022
\internalpagesizes{53\baselineskip}{160mm}{\voffset}{4mm}{\bindingoffset}{44pt}%
6028
% Use @afivepaper to print on European A5 paper.
6029
% From romildo@urano.iceb.ufop.br, 2 July 2000.
6030
% He also recommends making @example and @lisp be small.
6031
\def\afivepaper{{\globaldefs = 1
6032
\setleading{12.5pt}%
6033
\parskip = 2pt plus 1pt minus 0.1pt
6035
\internalpagesizes{166mm}{120mm}{\voffset}{-8mm}{\bindingoffset}{8pt}%
6037
\lispnarrowing = 0.2in
6040
\contentsrightmargin = 0mm
6041
\deftypemargin = 0pt
6042
\defbodyindent = 2mm
6048
% A specific text layout, 24x15cm overall, intended for A4 paper. Top margin
6049
% 29mm, hence bottom margin 28mm, nominal side margin 3cm.
6050
\def\afourlatex{{\globaldefs = 1
6051
\setleading{13.6pt}%
6054
\internalpagesizes{237mm}{150mm}{3.6mm}{3.6mm}{3mm}{7mm}%
6059
% Use @afourwide to print on European A4 paper in wide format.
6062
\internalpagesizes{6.5in}{9.5in}{\hoffset}{\normaloffset}{\bindingoffset}{7mm}%
6067
% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
6068
% Perhaps we should allow setting the margins, \topskip, \parskip,
6069
% and/or leading, also. Or perhaps we should compute them somehow.
6071
\def\pagesizes{\parsearg\pagesizesxxx}
6072
\def\pagesizesxxx#1{\pagesizesyyy #1,,\finish}
6073
\def\pagesizesyyy#1,#2,#3\finish{{%
6074
\setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
6077
\parskip = 3pt plus 2pt minus 1pt
6078
\setleading{13.2pt}%
6080
\internalpagesizes{#1}{\hsize}{\voffset}{\normaloffset}{\bindingoffset}{44pt}%
6083
% Set default to letter.
6088
\message{and turning on texinfo input format.}
6090
% Define macros to output various characters with catcode for normal text.
6100
\def\normaldoublequote{"}
6103
\def\normalunderscore{_}
6104
\def\normalverticalbar{|}
6106
\def\normalgreater{>}
6108
\def\normaldollar{$}
6110
% This macro is used to make a character print one way in ttfont
6111
% where it can probably just be output, and another way in other fonts,
6112
% where something hairier probably needs to be done.
6114
% #1 is what to print if we are indeed using \tt; #2 is what to print
6115
% otherwise. Since all the Computer Modern typewriter fonts have zero
6116
% interword stretch (and shrink), and it is reasonable to expect all
6117
% typewriter fonts to have this, we can check that font parameter.
6119
\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
6121
% Same as above, but check for italic font. Actually this also catches
6122
% non-italic slanted fonts since it is impossible to distinguish them from
6123
% italic fonts. But since this is only used by $ and it uses \sl anyway
6124
% this is not a problem.
6125
\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
6127
% Turn off all special characters except @
6128
% (and those which the user can use as if they were ordinary).
6129
% Most of these we simply print from the \tt font, but for some, we can
6130
% use math or other variants that look better in normal text.
6133
\def\activedoublequote{{\tt\char34}}
6134
\let"=\activedoublequote
6136
\def~{{\tt\char126}}
6142
\def_{\ifusingtt\normalunderscore\_}
6143
% Subroutine for the previous macro.
6144
\def\_{\leavevmode \kern.06em \vbox{\hrule width.3em height.1ex}}
6147
\def|{{\tt\char124}}
6155
\def+{{\tt \char 43}}
6157
\def${\ifusingit{{\sl\$}}\normaldollar}
6158
%\catcode 27=\active
6159
%\def^^[{$\diamondsuit$}
6161
% Set up an active definition for =, but don't enable it most of the time.
6162
{\catcode`\==\active
6163
\global\def={{\tt \char 61}}}
6168
% If a .fmt file is being used, characters that might appear in a file
6169
% name cannot be active until we have parsed the command line.
6170
% So turn them off again, and have \everyjob (or @setfilename) turn them on.
6171
% \otherifyactive is called near the end of this file.
6172
\def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
6176
% \rawbackslashxx output one backslash character in current font
6177
\global\chardef\rawbackslashxx=`\\
6178
%{\catcode`\\=\other
6179
%@gdef@rawbackslashxx{\}}
6181
% \rawbackslash redefines \ as input to do \rawbackslashxx.
6182
{\catcode`\\=\active
6183
@gdef@rawbackslash{@let\=@rawbackslashxx }}
6185
% \normalbackslash outputs one backslash in fixed width font.
6186
\def\normalbackslash{{\tt\rawbackslashxx}}
6188
% \catcode 17=0 % Define control-q
6191
% Used sometimes to turn off (effectively) the active characters
6192
% even after parsing them.
6193
@def@turnoffactive{@let"=@normaldoublequote
6194
@let\=@realbackslash
6197
@let_=@normalunderscore
6198
@let|=@normalverticalbar
6200
@let>=@normalgreater
6202
@let$=@normaldollar}
6204
@def@normalturnoffactive{@let"=@normaldoublequote
6205
@let\=@normalbackslash
6208
@let_=@normalunderscore
6209
@let|=@normalverticalbar
6211
@let>=@normalgreater
6213
@let$=@normaldollar}
6215
% Make _ and + \other characters, temporarily.
6216
% This is canceled by @fixbackslash.
6219
% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
6220
% That is what \eatinput is for; after that, the `\' should revert to printing
6223
@gdef@eatinput input texinfo{@fixbackslash}
6224
@global@let\ = @eatinput
6226
% On the other hand, perhaps the file did not have a `\input texinfo'. Then
6227
% the first `\{ in the file would cause an error. This macro tries to fix
6228
% that, assuming it is called before the first `\' could plausibly occur.
6229
% Also back turn on active characters that might appear in the input
6230
% file name, in case not using a pre-dumped format.
6232
@gdef@fixbackslash{%
6233
@ifx\@eatinput @let\ = @normalbackslash @fi
6238
% Say @foo, not \foo, in error messages.
6241
% These look ok in all fonts, so just make them not special.
6242
@catcode`@& = @other
6243
@catcode`@# = @other
6244
@catcode`@% = @other
6246
@c Set initial fonts.
6252
@c eval: (add-hook 'write-file-hooks 'time-stamp)
6253
@c page-delimiter: "^\\\\message"
6254
@c time-stamp-start: "def\\\\texinfoversion{"
6255
@c time-stamp-format: "%:y-%02m-%02d.%02H"
6256
@c time-stamp-end: "}"