14
14
# Project related configuration options
15
15
#---------------------------------------------------------------------------
17
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
17
# This tag specifies the encoding used for all characters in the config file
18
# that follow. The default is UTF-8 which is also the encoding used for all
19
# text before the first occurrence of this tag. Doxygen uses libiconv (or the
20
# iconv built into libc) for the transcoding. See
21
# http://www.gnu.org/software/libiconv for the list of possible encodings.
23
DOXYFILE_ENCODING = UTF-8
25
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
18
26
# by quotes) that should identify the project.
20
PROJECT_NAME = Vamp Plugin SDK
28
PROJECT_NAME = VampPluginSDK
22
# The PROJECT_NUMBER tag can be used to enter a project or revision number.
23
# This could be handy for archiving the generated documentation or
30
# The PROJECT_NUMBER tag can be used to enter a project or revision number.
31
# This could be handy for archiving the generated documentation or
24
32
# if some version control system is used.
28
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
29
# base path where the generated documentation will be put.
30
# If a relative path is entered, it will be relative to the location
36
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
37
# base path where the generated documentation will be put.
38
# If a relative path is entered, it will be relative to the location
31
39
# where doxygen was started. If left blank the current directory will be used.
33
41
OUTPUT_DIRECTORY = doc
35
# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
36
# 4096 sub-directories (in 2 levels) under the output directory of each output
37
# format and will distribute the generated files over these directories.
38
# Enabling this option can be useful when feeding doxygen a huge amount of
39
# source files, where putting all generated files in the same directory would
43
# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
44
# 4096 sub-directories (in 2 levels) under the output directory of each output
45
# format and will distribute the generated files over these directories.
46
# Enabling this option can be useful when feeding doxygen a huge amount of
47
# source files, where putting all generated files in the same directory would
40
48
# otherwise cause performance problems for the file system.
42
50
CREATE_SUBDIRS = NO
44
# The OUTPUT_LANGUAGE tag is used to specify the language in which all
45
# documentation generated by doxygen is written. Doxygen will use this
46
# information to generate all constant output in the proper language.
47
# The default language is English, other supported languages are:
48
# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish,
49
# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese,
50
# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian,
51
# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish,
52
# Swedish, and Ukrainian.
52
# The OUTPUT_LANGUAGE tag is used to specify the language in which all
53
# documentation generated by doxygen is written. Doxygen will use this
54
# information to generate all constant output in the proper language.
55
# The default language is English, other supported languages are:
56
# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
57
# Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek,
58
# Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages),
59
# Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish,
60
# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish,
54
63
OUTPUT_LANGUAGE = English
56
# This tag can be used to specify the encoding used in the generated output.
57
# The encoding is not always determined by the language that is chosen,
58
# but also whether or not the output is meant for Windows or non-Windows users.
59
# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
60
# forces the Windows encoding (this is the default for the Windows binary),
61
# whereas setting the tag to NO uses a Unix-style encoding (the default for
62
# all platforms other than Windows).
64
USE_WINDOWS_ENCODING = NO
66
# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
67
# include brief member descriptions after the members that are listed in
68
# the file and class documentation (similar to JavaDoc).
65
# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
66
# include brief member descriptions after the members that are listed in
67
# the file and class documentation (similar to JavaDoc).
69
68
# Set to NO to disable this.
71
70
BRIEF_MEMBER_DESC = YES
73
# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
74
# the brief description of a member or function before the detailed description.
75
# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
72
# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
73
# the brief description of a member or function before the detailed description.
74
# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
76
75
# brief descriptions will be completely suppressed.
80
# This tag implements a quasi-intelligent brief description abbreviator
81
# that is used to form the text in various listings. Each string
82
# in this list, if found as the leading text of the brief description, will be
83
# stripped from the text and the result after processing the whole list, is
84
# used as the annotated text. Otherwise, the brief description is used as-is.
85
# If left blank, the following values are used ("$name" is automatically
86
# replaced with the name of the entity): "The $name class" "The $name widget"
87
# "The $name file" "is" "provides" "specifies" "contains"
79
# This tag implements a quasi-intelligent brief description abbreviator
80
# that is used to form the text in various listings. Each string
81
# in this list, if found as the leading text of the brief description, will be
82
# stripped from the text and the result after processing the whole list, is
83
# used as the annotated text. Otherwise, the brief description is used as-is.
84
# If left blank, the following values are used ("$name" is automatically
85
# replaced with the name of the entity): "The $name class" "The $name widget"
86
# "The $name file" "is" "provides" "specifies" "contains"
88
87
# "represents" "a" "an" "the"
92
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
93
# Doxygen will generate a detailed section even if there is only a brief
91
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
92
# Doxygen will generate a detailed section even if there is only a brief
96
95
ALWAYS_DETAILED_SEC = NO
98
# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
99
# inherited members of a class in the documentation of that class as if those
100
# members were ordinary class members. Constructors, destructors and assignment
97
# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
98
# inherited members of a class in the documentation of that class as if those
99
# members were ordinary class members. Constructors, destructors and assignment
101
100
# operators of the base classes will not be shown.
103
102
INLINE_INHERITED_MEMB = YES
105
# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
106
# path before files name in the file list and in the header files. If set
107
# to NO the shortest path that makes the file name unique will be used
104
# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
105
# path before files name in the file list and in the header files. If set
106
# to NO the shortest path that makes the file name unique will be used.
109
108
FULL_PATH_NAMES = NO
111
# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
112
# can be used to strip a user-defined part of the path. Stripping is
113
# only done if one of the specified strings matches the left-hand part of
114
# the path. The tag can be used to show relative paths in the file list.
115
# If left blank the directory from which doxygen is run is used as the
110
# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
111
# can be used to strip a user-defined part of the path. Stripping is
112
# only done if one of the specified strings matches the left-hand part of
113
# the path. The tag can be used to show relative paths in the file list.
114
# If left blank the directory from which doxygen is run is used as the
120
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
121
# the path mentioned in the documentation of a class, which tells
122
# the reader which header file to include in order to use a class.
123
# If left blank only the name of the header file containing the class
124
# definition is used. Otherwise one should specify the include paths that
119
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
120
# the path mentioned in the documentation of a class, which tells
121
# the reader which header file to include in order to use a class.
122
# If left blank only the name of the header file containing the class
123
# definition is used. Otherwise one should specify the include paths that
125
124
# are normally passed to the compiler using the -I flag.
127
STRIP_FROM_INC_PATH =
126
STRIP_FROM_INC_PATH =
129
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
130
# (but less readable) file names. This can be useful is your file systems
128
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
129
# (but less readable) file names. This can be useful is your file systems
131
130
# doesn't support long names like on DOS, Mac, or CD-ROM.
135
# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
136
# will interpret the first line (until the first dot) of a JavaDoc-style
137
# comment as the brief description. If set to NO, the JavaDoc
138
# comments will behave just like the Qt-style comments (thus requiring an
139
# explicit @brief command for a brief description.
134
# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
135
# will interpret the first line (until the first dot) of a JavaDoc-style
136
# comment as the brief description. If set to NO, the JavaDoc
137
# comments will behave just like regular Qt-style comments
138
# (thus requiring an explicit @brief command for a brief description.)
141
140
JAVADOC_AUTOBRIEF = YES
143
# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
144
# treat a multi-line C++ special comment block (i.e. a block of //! or ///
145
# comments) as a brief description. This used to be the default behaviour.
146
# The new default is to treat a multi-line C++ comment block as a detailed
142
# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
143
# interpret the first line (until the first dot) of a Qt-style
144
# comment as the brief description. If set to NO, the comments
145
# will behave just like regular Qt-style comments (thus requiring
146
# an explicit \brief command for a brief description.)
150
# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
151
# treat a multi-line C++ special comment block (i.e. a block of //! or ///
152
# comments) as a brief description. This used to be the default behaviour.
153
# The new default is to treat a multi-line C++ comment block as a detailed
147
154
# description. Set this tag to YES if you prefer the old behaviour instead.
149
156
MULTILINE_CPP_IS_BRIEF = NO
151
# If the DETAILS_AT_TOP tag is set to YES then Doxygen
158
# If the DETAILS_AT_TOP tag is set to YES then Doxygen
152
159
# will output the detailed description near the top, like JavaDoc.
153
# If set to NO, the detailed description appears after the member
160
# If set to NO, the detailed description appears after the member
156
163
DETAILS_AT_TOP = YES
158
# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
159
# member inherits the documentation from any documented member that it
165
# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
166
# member inherits the documentation from any documented member that it
162
169
INHERIT_DOCS = YES
164
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
165
# tag is set to YES, then doxygen will reuse the documentation of the first
166
# member in the group (if any) for the other members of the group. By default
167
# all members of a group must be documented explicitly.
169
DISTRIBUTE_GROUP_DOC = NO
171
# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
172
# a new page for each member. If set to NO, the documentation of a member will
171
# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
172
# a new page for each member. If set to NO, the documentation of a member will
173
173
# be part of the file/class/namespace that contains it.
175
175
SEPARATE_MEMBER_PAGES = NO
177
# The TAB_SIZE tag can be used to set the number of spaces in a tab.
177
# The TAB_SIZE tag can be used to set the number of spaces in a tab.
178
178
# Doxygen uses this value to replace tabs by spaces in code fragments.
182
# This tag can be used to specify a number of aliases that acts
183
# as commands in the documentation. An alias has the form "name=value".
184
# For example adding "sideeffect=\par Side Effects:\n" will allow you to
185
# put the command \sideeffect (or @sideeffect) in the documentation, which
186
# will result in a user-defined paragraph with heading "Side Effects:".
182
# This tag can be used to specify a number of aliases that acts
183
# as commands in the documentation. An alias has the form "name=value".
184
# For example adding "sideeffect=\par Side Effects:\n" will allow you to
185
# put the command \sideeffect (or @sideeffect) in the documentation, which
186
# will result in a user-defined paragraph with heading "Side Effects:".
187
187
# You can put \n's in the value part of an alias to insert newlines.
191
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
192
# sources only. Doxygen will then generate output that is more tailored for C.
193
# For instance, some of the names that are used will be different. The list
191
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
192
# sources only. Doxygen will then generate output that is more tailored for C.
193
# For instance, some of the names that are used will be different. The list
194
194
# of all members will be omitted, etc.
196
196
OPTIMIZE_OUTPUT_FOR_C = NO
198
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources
199
# only. Doxygen will then generate output that is more tailored for Java.
200
# For instance, namespaces will be presented as packages, qualified scopes
201
# will look different, etc.
198
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
199
# sources only. Doxygen will then generate output that is more tailored for
200
# Java. For instance, namespaces will be presented as packages, qualified
201
# scopes will look different, etc.
203
203
OPTIMIZE_OUTPUT_JAVA = NO
205
# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
206
# the same type (for instance a group of public functions) to be put as a
207
# subgroup of that type (e.g. under the Public Functions section). Set it to
208
# NO to prevent subgrouping. Alternatively, this can be done per class using
205
# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
206
# sources only. Doxygen will then generate output that is more tailored for
209
OPTIMIZE_FOR_FORTRAN = NO
211
# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
212
# sources. Doxygen will then generate output that is tailored for
215
OPTIMIZE_OUTPUT_VHDL = NO
217
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
218
# to include (a tag file for) the STL sources as input, then you should
219
# set this tag to YES in order to let doxygen match functions declarations and
220
# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
221
# func(std::string) {}). This also make the inheritance and collaboration
222
# diagrams that involve STL classes more complete and accurate.
224
BUILTIN_STL_SUPPORT = NO
226
# If you use Microsoft's C++/CLI language, you should set this option to YES to
227
# enable parsing support.
231
# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
232
# Doxygen will parse them like normal C++ but will assume all classes use public
233
# instead of private inheritance when no explicit protection keyword is present.
237
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
238
# tag is set to YES, then doxygen will reuse the documentation of the first
239
# member in the group (if any) for the other members of the group. By default
240
# all members of a group must be documented explicitly.
242
DISTRIBUTE_GROUP_DOC = NO
244
# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
245
# the same type (for instance a group of public functions) to be put as a
246
# subgroup of that type (e.g. under the Public Functions section). Set it to
247
# NO to prevent subgrouping. Alternatively, this can be done per class using
209
248
# the \nosubgrouping command.
211
250
SUBGROUPING = YES
252
# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
253
# is documented as struct, union, or enum with the name of the typedef. So
254
# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
255
# with name TypeT. When disabled the typedef will appear as a member of a file,
256
# namespace, or class. And the struct will be named TypeS. This can typically
257
# be useful for C code in case the coding convention dictates that all compound
258
# types are typedef'ed and only the typedef is referenced, never the tag name.
260
TYPEDEF_HIDES_STRUCT = NO
213
262
#---------------------------------------------------------------------------
214
263
# Build related configuration options
215
264
#---------------------------------------------------------------------------
217
# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
218
# documentation are documented, even if no documentation was available.
219
# Private class members and static file members will be hidden unless
266
# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
267
# documentation are documented, even if no documentation was available.
268
# Private class members and static file members will be hidden unless
220
269
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
222
271
EXTRACT_ALL = YES
224
# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
273
# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
225
274
# will be included in the documentation.
227
276
EXTRACT_PRIVATE = YES
229
# If the EXTRACT_STATIC tag is set to YES all static members of a file
278
# If the EXTRACT_STATIC tag is set to YES all static members of a file
230
279
# will be included in the documentation.
232
281
EXTRACT_STATIC = YES
234
# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
235
# defined locally in source files will be included in the documentation.
283
# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
284
# defined locally in source files will be included in the documentation.
236
285
# If set to NO only classes defined in header files are included.
238
287
EXTRACT_LOCAL_CLASSES = YES
240
# This flag is only useful for Objective-C code. When set to YES local
241
# methods, which are defined in the implementation section but not in
242
# the interface are included in the documentation.
289
# This flag is only useful for Objective-C code. When set to YES local
290
# methods, which are defined in the implementation section but not in
291
# the interface are included in the documentation.
243
292
# If set to NO (the default) only methods in the interface are included.
245
294
EXTRACT_LOCAL_METHODS = NO
247
# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
248
# undocumented members of documented classes, files or namespaces.
249
# If set to NO (the default) these members will be included in the
250
# various overviews, but no documentation section is generated.
296
# If this flag is set to YES, the members of anonymous namespaces will be
297
# extracted and appear in the documentation as a namespace called
298
# 'anonymous_namespace{file}', where file will be replaced with the base
299
# name of the file that contains the anonymous namespace. By default
300
# anonymous namespace are hidden.
302
EXTRACT_ANON_NSPACES = NO
304
# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
305
# undocumented members of documented classes, files or namespaces.
306
# If set to NO (the default) these members will be included in the
307
# various overviews, but no documentation section is generated.
251
308
# This option has no effect if EXTRACT_ALL is enabled.
253
310
HIDE_UNDOC_MEMBERS = NO
255
# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
256
# undocumented classes that are normally visible in the class hierarchy.
257
# If set to NO (the default) these classes will be included in the various
312
# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
313
# undocumented classes that are normally visible in the class hierarchy.
314
# If set to NO (the default) these classes will be included in the various
258
315
# overviews. This option has no effect if EXTRACT_ALL is enabled.
260
317
HIDE_UNDOC_CLASSES = NO
262
# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
263
# friend (class|struct|union) declarations.
264
# If set to NO (the default) these declarations will be included in the
319
# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
320
# friend (class|struct|union) declarations.
321
# If set to NO (the default) these declarations will be included in the
267
324
HIDE_FRIEND_COMPOUNDS = NO
269
# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
270
# documentation blocks found inside the body of a function.
271
# If set to NO (the default) these blocks will be appended to the
326
# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
327
# documentation blocks found inside the body of a function.
328
# If set to NO (the default) these blocks will be appended to the
272
329
# function's detailed documentation block.
274
331
HIDE_IN_BODY_DOCS = NO
276
# The INTERNAL_DOCS tag determines if documentation
277
# that is typed after a \internal command is included. If the tag is set
278
# to NO (the default) then the documentation will be excluded.
333
# The INTERNAL_DOCS tag determines if documentation
334
# that is typed after a \internal command is included. If the tag is set
335
# to NO (the default) then the documentation will be excluded.
279
336
# Set it to YES to include the internal documentation.
281
338
INTERNAL_DOCS = NO
283
# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
284
# file names in lower-case letters. If set to YES upper-case letters are also
285
# allowed. This is useful if you have classes or files whose names only differ
286
# in case and if your file system supports case sensitive file names. Windows
340
# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
341
# file names in lower-case letters. If set to YES upper-case letters are also
342
# allowed. This is useful if you have classes or files whose names only differ
343
# in case and if your file system supports case sensitive file names. Windows
287
344
# and Mac users are advised to set this option to NO.
289
346
CASE_SENSE_NAMES = YES
291
# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
292
# will show members with their full class and namespace scopes in the
348
# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
349
# will show members with their full class and namespace scopes in the
293
350
# documentation. If set to YES the scope will be hidden.
295
352
HIDE_SCOPE_NAMES = NO
297
# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
298
# will put a list of the files that are included by a file in the documentation
354
# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
355
# will put a list of the files that are included by a file in the documentation
301
358
SHOW_INCLUDE_FILES = YES
303
# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
360
# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
304
361
# is inserted in the documentation for inline members.
306
363
INLINE_INFO = YES
308
# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
309
# will sort the (detailed) documentation of file and class members
310
# alphabetically by member name. If set to NO the members will appear in
365
# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
366
# will sort the (detailed) documentation of file and class members
367
# alphabetically by member name. If set to NO the members will appear in
311
368
# declaration order.
313
370
SORT_MEMBER_DOCS = NO
315
# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
316
# brief documentation of file, namespace and class members alphabetically
317
# by member name. If set to NO (the default) the members will appear in
372
# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
373
# brief documentation of file, namespace and class members alphabetically
374
# by member name. If set to NO (the default) the members will appear in
318
375
# declaration order.
320
377
SORT_BRIEF_DOCS = NO
322
# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
323
# sorted by fully-qualified names, including namespaces. If set to
324
# NO (the default), the class list will be sorted only by class name,
325
# not including the namespace part.
379
# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
380
# hierarchy of group names into alphabetical order. If set to NO (the default)
381
# the group names will appear in their defined order.
383
SORT_GROUP_NAMES = NO
385
# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
386
# sorted by fully-qualified names, including namespaces. If set to
387
# NO (the default), the class list will be sorted only by class name,
388
# not including the namespace part.
326
389
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
327
# Note: This option applies only to the class list, not to the
390
# Note: This option applies only to the class list, not to the
328
391
# alphabetical list.
330
393
SORT_BY_SCOPE_NAME = NO
332
# The GENERATE_TODOLIST tag can be used to enable (YES) or
333
# disable (NO) the todo list. This list is created by putting \todo
395
# The GENERATE_TODOLIST tag can be used to enable (YES) or
396
# disable (NO) the todo list. This list is created by putting \todo
334
397
# commands in the documentation.
336
399
GENERATE_TODOLIST = YES
338
# The GENERATE_TESTLIST tag can be used to enable (YES) or
339
# disable (NO) the test list. This list is created by putting \test
401
# The GENERATE_TESTLIST tag can be used to enable (YES) or
402
# disable (NO) the test list. This list is created by putting \test
340
403
# commands in the documentation.
342
405
GENERATE_TESTLIST = YES
344
# The GENERATE_BUGLIST tag can be used to enable (YES) or
345
# disable (NO) the bug list. This list is created by putting \bug
407
# The GENERATE_BUGLIST tag can be used to enable (YES) or
408
# disable (NO) the bug list. This list is created by putting \bug
346
409
# commands in the documentation.
348
411
GENERATE_BUGLIST = YES
350
# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
351
# disable (NO) the deprecated list. This list is created by putting
413
# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
414
# disable (NO) the deprecated list. This list is created by putting
352
415
# \deprecated commands in the documentation.
354
417
GENERATE_DEPRECATEDLIST= YES
356
# The ENABLED_SECTIONS tag can be used to enable conditional
419
# The ENABLED_SECTIONS tag can be used to enable conditional
357
420
# documentation sections, marked by \if sectionname ... \endif.
361
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
362
# the initial value of a variable or define consists of for it to appear in
363
# the documentation. If the initializer consists of more lines than specified
364
# here it will be hidden. Use a value of 0 to hide initializers completely.
365
# The appearance of the initializer of individual variables and defines in the
366
# documentation can be controlled using \showinitializer or \hideinitializer
424
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
425
# the initial value of a variable or define consists of for it to appear in
426
# the documentation. If the initializer consists of more lines than specified
427
# here it will be hidden. Use a value of 0 to hide initializers completely.
428
# The appearance of the initializer of individual variables and defines in the
429
# documentation can be controlled using \showinitializer or \hideinitializer
367
430
# command in the documentation regardless of this setting.
369
432
MAX_INITIALIZER_LINES = 30
371
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
372
# at the bottom of the documentation of classes and structs. If set to YES the
434
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
435
# at the bottom of the documentation of classes and structs. If set to YES the
373
436
# list will mention the files that were used to generate the documentation.
375
438
SHOW_USED_FILES = YES
377
# If the sources in your project are distributed over multiple directories
378
# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
379
# in the documentation. The default is YES.
440
# If the sources in your project are distributed over multiple directories
441
# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
442
# in the documentation. The default is NO.
381
444
SHOW_DIRECTORIES = YES
383
# The FILE_VERSION_FILTER tag can be used to specify a program or script that
384
# doxygen should invoke to get the current version for each file (typically from the
385
# version control system). Doxygen will invoke the program by executing (via
386
# popen()) the command <command> <input-file>, where <command> is the value of
387
# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
388
# provided by doxygen. Whatever the progam writes to standard output
446
# The FILE_VERSION_FILTER tag can be used to specify a program or script that
447
# doxygen should invoke to get the current version for each file (typically from
448
# the version control system). Doxygen will invoke the program by executing (via
449
# popen()) the command <command> <input-file>, where <command> is the value of
450
# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
451
# provided by doxygen. Whatever the program writes to standard output
389
452
# is used as the file version. See the manual for examples.
391
FILE_VERSION_FILTER =
454
FILE_VERSION_FILTER =
393
456
#---------------------------------------------------------------------------
394
457
# configuration options related to warning and progress messages
395
458
#---------------------------------------------------------------------------
397
# The QUIET tag can be used to turn on/off the messages that are generated
460
# The QUIET tag can be used to turn on/off the messages that are generated
398
461
# by doxygen. Possible values are YES and NO. If left blank NO is used.
402
# The WARNINGS tag can be used to turn on/off the warning messages that are
403
# generated by doxygen. Possible values are YES and NO. If left blank
465
# The WARNINGS tag can be used to turn on/off the warning messages that are
466
# generated by doxygen. Possible values are YES and NO. If left blank
408
# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
409
# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
471
# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
472
# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
410
473
# automatically be disabled.
412
475
WARN_IF_UNDOCUMENTED = YES
414
# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
415
# potential errors in the documentation, such as not documenting some
416
# parameters in a documented function, or documenting parameters that
477
# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
478
# potential errors in the documentation, such as not documenting some
479
# parameters in a documented function, or documenting parameters that
417
480
# don't exist or using markup commands wrongly.
419
482
WARN_IF_DOC_ERROR = YES
421
# This WARN_NO_PARAMDOC option can be abled to get warnings for
422
# functions that are documented, but have no documentation for their parameters
423
# or return value. If set to NO (the default) doxygen will only warn about
424
# wrong or incomplete parameter documentation, but not about the absence of
484
# This WARN_NO_PARAMDOC option can be abled to get warnings for
485
# functions that are documented, but have no documentation for their parameters
486
# or return value. If set to NO (the default) doxygen will only warn about
487
# wrong or incomplete parameter documentation, but not about the absence of
427
490
WARN_NO_PARAMDOC = YES
429
# The WARN_FORMAT tag determines the format of the warning messages that
430
# doxygen can produce. The string should contain the $file, $line, and $text
431
# tags, which will be replaced by the file and line number from which the
432
# warning originated and the warning text. Optionally the format may contain
433
# $version, which will be replaced by the version of the file (if it could
492
# The WARN_FORMAT tag determines the format of the warning messages that
493
# doxygen can produce. The string should contain the $file, $line, and $text
494
# tags, which will be replaced by the file and line number from which the
495
# warning originated and the warning text. Optionally the format may contain
496
# $version, which will be replaced by the version of the file (if it could
434
497
# be obtained via FILE_VERSION_FILTER)
436
499
WARN_FORMAT = "$file:$line: $text"
438
# The WARN_LOGFILE tag can be used to specify a file to which warning
439
# and error messages should be written. If left blank the output is written
501
# The WARN_LOGFILE tag can be used to specify a file to which warning
502
# and error messages should be written. If left blank the output is written
442
505
WARN_LOGFILE = docs/doxygen/warning.log
597
687
# configuration options related to the alphabetical class index
598
688
#---------------------------------------------------------------------------
600
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
601
# of all compounds will be generated. Enable this if the project
690
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
691
# of all compounds will be generated. Enable this if the project
602
692
# contains a lot of classes, structs, unions or interfaces.
604
694
ALPHABETICAL_INDEX = NO
606
# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
607
# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
696
# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
697
# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
608
698
# in which this list will be split (can be a number in the range [1..20])
610
700
COLS_IN_ALPHA_INDEX = 3
612
# In case all classes in a project start with a common prefix, all
613
# classes will be put under the same header in the alphabetical index.
614
# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
702
# In case all classes in a project start with a common prefix, all
703
# classes will be put under the same header in the alphabetical index.
704
# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
615
705
# should be ignored while generating the index headers.
619
709
#---------------------------------------------------------------------------
620
710
# configuration options related to the HTML output
621
711
#---------------------------------------------------------------------------
623
# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
713
# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
624
714
# generate HTML output.
626
716
GENERATE_HTML = YES
628
# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
629
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
718
# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
719
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
630
720
# put in front of it. If left blank `html' will be used as the default path.
632
722
HTML_OUTPUT = html
634
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
635
# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
724
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
725
# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
636
726
# doxygen will generate files with .html extension.
638
728
HTML_FILE_EXTENSION = .html
640
# The HTML_HEADER tag can be used to specify a personal HTML header for
641
# each generated HTML page. If it is left blank doxygen will generate a
730
# The HTML_HEADER tag can be used to specify a personal HTML header for
731
# each generated HTML page. If it is left blank doxygen will generate a
642
732
# standard header.
646
# The HTML_FOOTER tag can be used to specify a personal HTML footer for
647
# each generated HTML page. If it is left blank doxygen will generate a
736
# The HTML_FOOTER tag can be used to specify a personal HTML footer for
737
# each generated HTML page. If it is left blank doxygen will generate a
648
738
# standard footer.
652
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
653
# style sheet that is used by each HTML page. It can be used to
654
# fine-tune the look of the HTML output. If the tag is left blank doxygen
655
# will generate a default style sheet. Note that doxygen will try to copy
656
# the style sheet file to the HTML output directory, so don't put your own
742
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
743
# style sheet that is used by each HTML page. It can be used to
744
# fine-tune the look of the HTML output. If the tag is left blank doxygen
745
# will generate a default style sheet. Note that doxygen will try to copy
746
# the style sheet file to the HTML output directory, so don't put your own
657
747
# stylesheet in the HTML output directory as well, or it will be erased!
661
# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
662
# files or namespaces will be aligned in HTML using tables. If set to
751
# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
752
# files or namespaces will be aligned in HTML using tables. If set to
663
753
# NO a bullet list will be used.
665
755
HTML_ALIGN_MEMBERS = YES
667
# If the GENERATE_HTMLHELP tag is set to YES, additional index files
668
# will be generated that can be used as input for tools like the
669
# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
757
# If the GENERATE_HTMLHELP tag is set to YES, additional index files
758
# will be generated that can be used as input for tools like the
759
# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
670
760
# of the generated HTML documentation.
672
762
GENERATE_HTMLHELP = NO
674
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
675
# be used to specify the file name of the resulting .chm file. You
676
# can add a path in front of the file if the result should not be
764
# If the GENERATE_DOCSET tag is set to YES, additional index files
765
# will be generated that can be used as input for Apple's Xcode 3
766
# integrated development environment, introduced with OSX 10.5 (Leopard).
767
# To create a documentation set, doxygen will generate a Makefile in the
768
# HTML output directory. Running make will produce the docset in that
769
# directory and running "make install" will install the docset in
770
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
775
# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
776
# feed. A documentation feed provides an umbrella under which multiple
777
# documentation sets from a single provider (such as a company or product suite)
780
DOCSET_FEEDNAME = "Doxygen generated docs"
782
# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
783
# should uniquely identify the documentation set bundle. This should be a
784
# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
785
# will append .docset to the name.
787
DOCSET_BUNDLE_ID = org.doxygen.Project
789
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
790
# documentation will contain sections that can be hidden and shown after the
791
# page has loaded. For this to work a browser that supports
792
# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
793
# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
795
HTML_DYNAMIC_SECTIONS = NO
797
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
798
# be used to specify the file name of the resulting .chm file. You
799
# can add a path in front of the file if the result should not be
677
800
# written to the html output directory.
681
# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
682
# be used to specify the location (absolute path including file name) of
683
# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
804
# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
805
# be used to specify the location (absolute path including file name) of
806
# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
684
807
# the HTML help compiler on the generated index.hhp.
688
# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
689
# controls if a separate .chi index file is generated (YES) or that
811
# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
812
# controls if a separate .chi index file is generated (YES) or that
690
813
# it should be included in the master .chm file (NO).
692
815
GENERATE_CHI = NO
694
# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
695
# controls whether a binary table of contents is generated (YES) or a
817
# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
818
# controls whether a binary table of contents is generated (YES) or a
696
819
# normal table of contents (NO) in the .chm file.
700
# The TOC_EXPAND flag can be set to YES to add extra items for group members
823
# The TOC_EXPAND flag can be set to YES to add extra items for group members
701
824
# to the contents of the HTML help documentation and to the tree view.
705
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
706
# top of each HTML page. The value NO (the default) enables the index and
828
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
829
# top of each HTML page. The value NO (the default) enables the index and
707
830
# the value YES disables it.
709
832
DISABLE_INDEX = NO
711
# This tag can be used to set the number of enum values (range [1..20])
834
# This tag can be used to set the number of enum values (range [1..20])
712
835
# that doxygen will group on one line in the generated HTML documentation.
714
837
ENUM_VALUES_PER_LINE = 4
716
839
# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
717
# generated containing a tree-like index structure (just like the one that
718
# is generated for HTML Help). For this to work a browser that supports
719
# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
720
# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
840
# generated containing a tree-like index structure (just like the one that
841
# is generated for HTML Help). For this to work a browser that supports
842
# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
843
# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
721
844
# probably better off using the HTML help feature.
723
846
GENERATE_TREEVIEW = YES
725
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
726
# used to set the initial width (in pixels) of the frame in which the tree
848
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
849
# used to set the initial width (in pixels) of the frame in which the tree
729
852
TREEVIEW_WIDTH = 250
925
1048
# configuration options related to the Perl module output
926
1049
#---------------------------------------------------------------------------
928
# If the GENERATE_PERLMOD tag is set to YES Doxygen will
929
# generate a Perl module file that captures the structure of
930
# the code including all documentation. Note that this
931
# feature is still experimental and incomplete at the
1051
# If the GENERATE_PERLMOD tag is set to YES Doxygen will
1052
# generate a Perl module file that captures the structure of
1053
# the code including all documentation. Note that this
1054
# feature is still experimental and incomplete at the
934
1057
GENERATE_PERLMOD = NO
936
# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
937
# the necessary Makefile rules, Perl scripts and LaTeX code to be able
1059
# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1060
# the necessary Makefile rules, Perl scripts and LaTeX code to be able
938
1061
# to generate PDF and DVI output from the Perl module output.
940
1063
PERLMOD_LATEX = NO
942
# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
943
# nicely formatted so it can be parsed by a human reader. This is useful
944
# if you want to understand what is going on. On the other hand, if this
945
# tag is set to NO the size of the Perl module output will be much smaller
1065
# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1066
# nicely formatted so it can be parsed by a human reader. This is useful
1067
# if you want to understand what is going on. On the other hand, if this
1068
# tag is set to NO the size of the Perl module output will be much smaller
946
1069
# and Perl will parse it just the same.
948
1071
PERLMOD_PRETTY = YES
950
# The names of the make variables in the generated doxyrules.make file
951
# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
952
# This is useful so different doxyrules.make files included by the same
1073
# The names of the make variables in the generated doxyrules.make file
1074
# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1075
# This is useful so different doxyrules.make files included by the same
953
1076
# Makefile don't overwrite each other's variables.
955
PERLMOD_MAKEVAR_PREFIX =
957
#---------------------------------------------------------------------------
958
# Configuration options related to the preprocessor
959
#---------------------------------------------------------------------------
961
# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
962
# evaluate all C-preprocessor directives found in the sources and include
1078
PERLMOD_MAKEVAR_PREFIX =
1080
#---------------------------------------------------------------------------
1081
# Configuration options related to the preprocessor
1082
#---------------------------------------------------------------------------
1084
# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1085
# evaluate all C-preprocessor directives found in the sources and include
965
1088
ENABLE_PREPROCESSING = YES
967
# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
968
# names in the source code. If set to NO (the default) only conditional
969
# compilation will be performed. Macro expansion can be done in a controlled
1090
# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1091
# names in the source code. If set to NO (the default) only conditional
1092
# compilation will be performed. Macro expansion can be done in a controlled
970
1093
# way by setting EXPAND_ONLY_PREDEF to YES.
972
1095
MACRO_EXPANSION = NO
974
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
975
# then the macro expansion is limited to the macros specified with the
976
# PREDEFINED and EXPAND_AS_PREDEFINED tags.
1097
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1098
# then the macro expansion is limited to the macros specified with the
1099
# PREDEFINED and EXPAND_AS_DEFINED tags.
978
1101
EXPAND_ONLY_PREDEF = NO
980
# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1103
# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
981
1104
# in the INCLUDE_PATH (see below) will be search if a #include is found.
983
1106
SEARCH_INCLUDES = NO
985
# The INCLUDE_PATH tag can be used to specify one or more directories that
986
# contain include files that are not input files but should be processed by
1108
# The INCLUDE_PATH tag can be used to specify one or more directories that
1109
# contain include files that are not input files but should be processed by
987
1110
# the preprocessor.
991
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
992
# patterns (like *.h and *.hpp) to filter out the header-files in the
993
# directories. If left blank, the patterns specified with FILE_PATTERNS will
1114
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1115
# patterns (like *.h and *.hpp) to filter out the header-files in the
1116
# directories. If left blank, the patterns specified with FILE_PATTERNS will
996
1119
INCLUDE_FILE_PATTERNS =
998
# The PREDEFINED tag can be used to specify one or more macro names that
999
# are defined before the preprocessor is started (similar to the -D option of
1000
# gcc). The argument of the tag is a list of macros of the form: name
1001
# or name=definition (no spaces). If the definition and the = are
1002
# omitted =1 is assumed. To prevent a macro definition from being
1003
# undefined via #undef or recursively expanded use the := operator
1121
# The PREDEFINED tag can be used to specify one or more macro names that
1122
# are defined before the preprocessor is started (similar to the -D option of
1123
# gcc). The argument of the tag is a list of macros of the form: name
1124
# or name=definition (no spaces). If the definition and the = are
1125
# omitted =1 is assumed. To prevent a macro definition from being
1126
# undefined via #undef or recursively expanded use the := operator
1004
1127
# instead of the = operator.
1006
PREDEFINED = HAVE_FFTW3F HAVE_FISHSOUND HAVE_JACK HAVE_LIBLO HAVE_LRDF HAVE_MAD HAVE_OGGZ HAVE_PORTAUDIO HAVE_SAMPLERATE HAVE_SNDFILE HAVE_VAMP
1129
PREDEFINED = HAVE_FFTW3F \
1008
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1009
# this tag can be used to specify a list of macro names that should be expanded.
1010
# The macro definition that is found in the sources will be used.
1141
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1142
# this tag can be used to specify a list of macro names that should be expanded.
1143
# The macro definition that is found in the sources will be used.
1011
1144
# Use the PREDEFINED tag if you want to use a different macro definition.
1015
# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1016
# doxygen's preprocessor will remove all function-like macros that are alone
1017
# on a line, have an all uppercase name, and do not end with a semicolon. Such
1018
# function macros are typically used for boiler-plate code, and will confuse
1148
# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1149
# doxygen's preprocessor will remove all function-like macros that are alone
1150
# on a line, have an all uppercase name, and do not end with a semicolon. Such
1151
# function macros are typically used for boiler-plate code, and will confuse
1019
1152
# the parser if not removed.
1021
1154
SKIP_FUNCTION_MACROS = YES
1023
1156
#---------------------------------------------------------------------------
1024
# Configuration::additions related to external references
1157
# Configuration::additions related to external references
1025
1158
#---------------------------------------------------------------------------
1027
# The TAGFILES option can be used to specify one or more tagfiles.
1028
# Optionally an initial location of the external documentation
1029
# can be added for each tagfile. The format of a tag file without
1030
# this location is as follows:
1031
# TAGFILES = file1 file2 ...
1032
# Adding location for the tag files is done as follows:
1033
# TAGFILES = file1=loc1 "file2 = loc2" ...
1034
# where "loc1" and "loc2" can be relative or absolute paths or
1035
# URLs. If a location is present for each tag, the installdox tool
1160
# The TAGFILES option can be used to specify one or more tagfiles.
1161
# Optionally an initial location of the external documentation
1162
# can be added for each tagfile. The format of a tag file without
1163
# this location is as follows:
1164
# TAGFILES = file1 file2 ...
1165
# Adding location for the tag files is done as follows:
1166
# TAGFILES = file1=loc1 "file2 = loc2" ...
1167
# where "loc1" and "loc2" can be relative or absolute paths or
1168
# URLs. If a location is present for each tag, the installdox tool
1036
1169
# does not have to be run to correct the links.
1037
1170
# Note that each tag file must have a unique name
1038
1171
# (where the name does NOT include the path)
1039
# If a tag file is not located in the directory in which doxygen
1172
# If a tag file is not located in the directory in which doxygen
1040
1173
# is run, you must also specify the path to the tagfile here.
1044
# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1177
# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1045
1178
# a tag file that is based on the input files it reads.
1049
# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1050
# in the class index. If set to NO only the inherited external classes
1182
# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1183
# in the class index. If set to NO only the inherited external classes
1051
1184
# will be listed.
1053
1186
ALLEXTERNALS = NO
1055
# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1056
# in the modules index. If set to NO, only the current project's groups will
1188
# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1189
# in the modules index. If set to NO, only the current project's groups will
1059
1192
EXTERNAL_GROUPS = YES
1061
# The PERL_PATH should be the absolute path and name of the perl script
1194
# The PERL_PATH should be the absolute path and name of the perl script
1062
1195
# interpreter (i.e. the result of `which perl').
1064
1197
PERL_PATH = /usr/bin/perl
1066
1199
#---------------------------------------------------------------------------
1067
# Configuration options related to the dot tool
1200
# Configuration options related to the dot tool
1068
1201
#---------------------------------------------------------------------------
1070
# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1071
# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1072
# or super classes. Setting the tag to NO turns the diagrams off. Note that
1073
# this option is superseded by the HAVE_DOT option below. This is only a
1074
# fallback. It is recommended to install and use dot, since it yields more
1203
# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1204
# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1205
# or super classes. Setting the tag to NO turns the diagrams off. Note that
1206
# this option is superseded by the HAVE_DOT option below. This is only a
1207
# fallback. It is recommended to install and use dot, since it yields more
1075
1208
# powerful graphs.
1077
1210
CLASS_DIAGRAMS = NO
1079
# If set to YES, the inheritance and collaboration graphs will hide
1080
# inheritance and usage relations if the target is undocumented
1212
# You can define message sequence charts within doxygen comments using the \msc
1213
# command. Doxygen will then run the mscgen tool (see
1214
# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1215
# documentation. The MSCGEN_PATH tag allows you to specify the directory where
1216
# the mscgen tool resides. If left empty the tool is assumed to be found in the
1217
# default search path.
1221
# If set to YES, the inheritance and collaboration graphs will hide
1222
# inheritance and usage relations if the target is undocumented
1081
1223
# or is not a class.
1083
1225
HIDE_UNDOC_RELATIONS = YES
1085
# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1086
# available from the path. This tool is part of Graphviz, a graph visualization
1087
# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1227
# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1228
# available from the path. This tool is part of Graphviz, a graph visualization
1229
# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1088
1230
# have no effect if this option is set to NO (the default)
1092
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1093
# will generate a graph for each documented class showing the direct and
1094
# indirect inheritance relations. Setting this tag to YES will force the
1234
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1235
# will generate a graph for each documented class showing the direct and
1236
# indirect inheritance relations. Setting this tag to YES will force the
1095
1237
# the CLASS_DIAGRAMS tag to NO.
1097
1239
CLASS_GRAPH = YES
1099
# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1100
# will generate a graph for each documented class showing the direct and
1101
# indirect implementation dependencies (inheritance, containment, and
1241
# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1242
# will generate a graph for each documented class showing the direct and
1243
# indirect implementation dependencies (inheritance, containment, and
1102
1244
# class references variables) of the class with other documented classes.
1104
1246
COLLABORATION_GRAPH = NO
1106
# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1248
# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1107
1249
# will generate a graph for groups, showing the direct groups dependencies
1109
1251
GROUP_GRAPHS = YES
1111
# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1112
# collaboration diagrams in a style similar to the OMG's Unified Modeling
1253
# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1254
# collaboration diagrams in a style similar to the OMG's Unified Modeling
1117
# If set to YES, the inheritance and collaboration graphs will show the
1259
# If set to YES, the inheritance and collaboration graphs will show the
1118
1260
# relations between templates and their instances.
1120
1262
TEMPLATE_RELATIONS = NO
1122
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1123
# tags are set to YES then doxygen will generate a graph for each documented
1124
# file showing the direct and indirect include dependencies of the file with
1264
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1265
# tags are set to YES then doxygen will generate a graph for each documented
1266
# file showing the direct and indirect include dependencies of the file with
1125
1267
# other documented files.
1127
1269
INCLUDE_GRAPH = YES
1129
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1130
# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1131
# documented header file showing the documented files that directly or
1271
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1272
# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1273
# documented header file showing the documented files that directly or
1132
1274
# indirectly include this file.
1134
1276
INCLUDED_BY_GRAPH = YES
1136
# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
1137
# generate a call dependency graph for every global function or class method.
1138
# Note that enabling this option will significantly increase the time of a run.
1139
# So in most cases it will be better to enable call graphs for selected
1140
# functions only using the \callgraph command.
1278
# If the CALL_GRAPH and HAVE_DOT options are set to YES then
1279
# doxygen will generate a call dependency graph for every global function
1280
# or class method. Note that enabling this option will significantly increase
1281
# the time of a run. So in most cases it will be better to enable call graphs
1282
# for selected functions only using the \callgraph command.
1142
1284
CALL_GRAPH = NO
1144
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1286
# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1287
# doxygen will generate a caller dependency graph for every global function
1288
# or class method. Note that enabling this option will significantly increase
1289
# the time of a run. So in most cases it will be better to enable caller
1290
# graphs for selected functions only using the \callergraph command.
1294
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1145
1295
# will graphical hierarchy of all classes instead of a textual one.
1147
1297
GRAPHICAL_HIERARCHY = YES
1149
# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1150
# then doxygen will show the dependencies a directory has on other directories
1299
# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1300
# then doxygen will show the dependencies a directory has on other directories
1151
1301
# in a graphical way. The dependency relations are determined by the #include
1152
1302
# relations between the files in the directories.
1154
1304
DIRECTORY_GRAPH = YES
1156
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1306
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1157
1307
# generated by dot. Possible values are png, jpg, or gif
1158
1308
# If left blank png will be used.
1160
1310
DOT_IMAGE_FORMAT = png
1162
# The tag DOT_PATH can be used to specify the path where the dot tool can be
1312
# The tag DOT_PATH can be used to specify the path where the dot tool can be
1163
1313
# found. If left blank, it is assumed the dot tool can be found in the path.
1167
# The DOTFILE_DIRS tag can be used to specify one or more directories that
1168
# contain dot files that are included in the documentation (see the
1317
# The DOTFILE_DIRS tag can be used to specify one or more directories that
1318
# contain dot files that are included in the documentation (see the
1169
1319
# \dotfile command).
1173
# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
1174
# (in pixels) of the graphs generated by dot. If a graph becomes larger than
1175
# this value, doxygen will try to truncate the graph, so that it fits within
1176
# the specified constraint. Beware that most browsers cannot cope with very
1179
MAX_DOT_GRAPH_WIDTH = 1024
1181
# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
1182
# (in pixels) of the graphs generated by dot. If a graph becomes larger than
1183
# this value, doxygen will try to truncate the graph, so that it fits within
1184
# the specified constraint. Beware that most browsers cannot cope with very
1187
MAX_DOT_GRAPH_HEIGHT = 1024
1189
# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1190
# graphs generated by dot. A depth value of 3 means that only nodes reachable
1191
# from the root by following a path via at most 3 edges will be shown. Nodes
1192
# that lay further from the root node will be omitted. Note that setting this
1193
# option to 1 or 2 may greatly reduce the computation time needed for large
1194
# code bases. Also note that a graph may be further truncated if the graph's
1195
# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH
1196
# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default),
1197
# the graph is not depth-constrained.
1323
# The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1324
# nodes that will be shown in the graph. If the number of nodes in a graph
1325
# becomes larger than this value, doxygen will truncate the graph, which is
1326
# visualized by representing a node as a red box. Note that doxygen if the
1327
# number of direct children of the root node in a graph is already larger than
1328
# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1329
# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1331
DOT_GRAPH_MAX_NODES = 50
1333
# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1334
# graphs generated by dot. A depth value of 3 means that only nodes reachable
1335
# from the root by following a path via at most 3 edges will be shown. Nodes
1336
# that lay further from the root node will be omitted. Note that setting this
1337
# option to 1 or 2 may greatly reduce the computation time needed for large
1338
# code bases. Also note that the size of a graph can be further restricted by
1339
# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1199
1341
MAX_DOT_GRAPH_DEPTH = 0
1201
# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1202
# background. This is disabled by default, which results in a white background.
1203
# Warning: Depending on the platform used, enabling this option may lead to
1204
# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
1343
# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1344
# background. This is enabled by default, which results in a transparent
1345
# background. Warning: Depending on the platform used, enabling this option
1346
# may lead to badly anti-aliased labels on the edges of a graph (i.e. they
1347
# become hard to read).
1207
1349
DOT_TRANSPARENT = NO
1209
# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1210
# files in one run (i.e. multiple -o and -T options on the command line). This
1211
# makes dot run faster, but since only newer versions of dot (>1.8.10)
1351
# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1352
# files in one run (i.e. multiple -o and -T options on the command line). This
1353
# makes dot run faster, but since only newer versions of dot (>1.8.10)
1212
1354
# support this, this feature is disabled by default.
1214
1356
DOT_MULTI_TARGETS = YES
1216
# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1217
# generate a legend page explaining the meaning of the various boxes and
1358
# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1359
# generate a legend page explaining the meaning of the various boxes and
1218
1360
# arrows in the dot generated graphs.
1220
1362
GENERATE_LEGEND = YES
1222
# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1223
# remove the intermediate dot files that are used to generate
1364
# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1365
# remove the intermediate dot files that are used to generate
1224
1366
# the various graphs.
1226
1368
DOT_CLEANUP = YES
1228
1370
#---------------------------------------------------------------------------
1229
# Configuration::additions related to the search engine
1371
# Configuration::additions related to the search engine
1230
1372
#---------------------------------------------------------------------------
1232
# The SEARCHENGINE tag specifies whether or not a search engine should be
1374
# The SEARCHENGINE tag specifies whether or not a search engine should be
1233
1375
# used. If set to NO the values of all tags below this one will be ignored.
1235
1377
SEARCHENGINE = NO