1
Installation Instructions
2
*************************
4
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
5
2006, 2007, 2008 Free Software Foundation, Inc.
7
This file is free documentation; the Free Software Foundation gives
8
unlimited permission to copy, distribute and modify it.
13
Briefly, the shell commands `./configure; make; make install' should
14
configure, build, and install this package. The following
15
more-detailed instructions are generic; see the `README' file for
16
instructions specific to this package.
18
The `configure' shell script attempts to guess correct values for
19
various system-dependent variables used during compilation. It uses
20
those values to create a `Makefile' in each directory of the package.
21
It may also create one or more `.h' files containing system-dependent
22
definitions. Finally, it creates a shell script `config.status' that
23
you can run in the future to recreate the current configuration, and a
24
file `config.log' containing compiler output (useful mainly for
25
debugging `configure').
27
It can also use an optional file (typically called `config.cache'
28
and enabled with `--cache-file=config.cache' or simply `-C') that saves
29
the results of its tests to speed up reconfiguring. Caching is
30
disabled by default to prevent problems with accidental use of stale
33
If you need to do unusual things to compile the package, please try
34
to figure out how `configure' could check whether to do them, and mail
35
diffs or instructions to the address given in the `README' so they can
36
be considered for the next release. If you are using the cache, and at
37
some point `config.cache' contains results you don't want to keep, you
38
may remove or edit it.
40
The file `configure.ac' (or `configure.in') is used to create
41
`configure' by a program called `autoconf'. You need `configure.ac' if
42
you want to change it or regenerate `configure' using a newer version
45
The simplest way to compile this package is:
47
1. `cd' to the directory containing the package's source code and type
48
`./configure' to configure the package for your system.
50
Running `configure' might take a while. While running, it prints
51
some messages telling which features it is checking for.
53
2. Type `make' to compile the package.
55
3. Optionally, type `make check' to run any self-tests that come with
58
4. Type `make install' to install the programs and any data files and
61
5. You can remove the program binaries and object files from the
62
source code directory by typing `make clean'. To also remove the
63
files that `configure' created (so you can compile the package for
64
a different kind of computer), type `make distclean'. There is
65
also a `make maintainer-clean' target, but that is intended mainly
66
for the package's developers. If you use it, you may have to get
67
all sorts of other programs in order to regenerate files that came
68
with the distribution.
70
6. Often, you can also type `make uninstall' to remove the installed
76
Some systems require unusual options for compilation or linking that
77
the `configure' script does not know about. Run `./configure --help'
78
for details on some of the pertinent environment variables.
80
You can give `configure' initial values for configuration parameters
81
by setting variables in the command line or in the environment. Here
84
./configure CC=c99 CFLAGS=-g LIBS=-lposix
86
*Note Defining Variables::, for more details.
88
Compiling For Multiple Architectures
89
====================================
91
You can compile the package for more than one kind of computer at the
92
same time, by placing the object files for each architecture in their
93
own directory. To do this, you can use GNU `make'. `cd' to the
94
directory where you want the object files and executables to go and run
95
the `configure' script. `configure' automatically checks for the
96
source code in the directory that `configure' is in and in `..'.
98
With a non-GNU `make', it is safer to compile the package for one
99
architecture at a time in the source code directory. After you have
100
installed the package for one architecture, use `make distclean' before
101
reconfiguring for another architecture.
103
On MacOS X 10.5 and later systems, you can create libraries and
104
executables that work on multiple system types--known as "fat" or
105
"universal" binaries--by specifying multiple `-arch' options to the
106
compiler but only a single `-arch' option to the preprocessor. Like
109
./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
110
CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
111
CPP="gcc -E" CXXCPP="g++ -E"
113
This is not guaranteed to produce working output in all cases, you
114
may have to build one architecture at a time and combine the results
115
using the `lipo' tool if you have problems.
120
By default, `make install' installs the package's commands under
121
`/usr/local/bin', include files under `/usr/local/include', etc. You
122
can specify an installation prefix other than `/usr/local' by giving
123
`configure' the option `--prefix=PREFIX'.
125
You can specify separate installation prefixes for
126
architecture-specific files and architecture-independent files. If you
127
pass the option `--exec-prefix=PREFIX' to `configure', the package uses
128
PREFIX as the prefix for installing programs and libraries.
129
Documentation and other data files still use the regular prefix.
131
In addition, if you use an unusual directory layout you can give
132
options like `--bindir=DIR' to specify different values for particular
133
kinds of files. Run `configure --help' for a list of the directories
134
you can set and what kinds of files go in them.
136
If the package supports it, you can cause programs to be installed
137
with an extra prefix or suffix on their names by giving `configure' the
138
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
143
Some packages pay attention to `--enable-FEATURE' options to
144
`configure', where FEATURE indicates an optional part of the package.
145
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
146
is something like `gnu-as' or `x' (for the X Window System). The
147
`README' should mention any `--enable-' and `--with-' options that the
150
For packages that use the X Window System, `configure' can usually
151
find the X include and library files automatically, but if it doesn't,
152
you can use the `configure' options `--x-includes=DIR' and
153
`--x-libraries=DIR' to specify their locations.
158
On HP-UX, the default C compiler is not ANSI C compatible. If GNU
159
CC is not installed, it is recommended to use the following options in
160
order to use an ANSI C compiler:
162
./configure CC="cc -Ae"
164
and if that doesn't work, install pre-built binaries of GCC for HP-UX.
166
On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
167
parse its `<wchar.h>' header file. The option `-nodtk' can be used as
168
a workaround. If GNU CC is not installed, it is therefore recommended
173
and if that doesn't work, try
175
./configure CC="cc -nodtk"
177
Specifying the System Type
178
==========================
180
There may be some features `configure' cannot figure out
181
automatically, but needs to determine by the type of machine the package
182
will run on. Usually, assuming the package is built to be run on the
183
_same_ architectures, `configure' can figure that out, but if it prints
184
a message saying it cannot guess the machine type, give it the
185
`--build=TYPE' option. TYPE can either be a short name for the system
186
type, such as `sun4', or a canonical name which has the form:
190
where SYSTEM can have one of these forms:
194
See the file `config.sub' for the possible values of each field. If
195
`config.sub' isn't included in this package, then this package doesn't
196
need to know the machine type.
198
If you are _building_ compiler tools for cross-compiling, you should
199
use the option `--target=TYPE' to select the type of system they will
202
If you want to _use_ a cross compiler, that generates code for a
203
platform different from the build platform, you should specify the
204
"host" platform (i.e., that on which the generated programs will
205
eventually be run) with `--host=TYPE'.
210
If you want to set default values for `configure' scripts to share,
211
you can create a site shell script called `config.site' that gives
212
default values for variables like `CC', `cache_file', and `prefix'.
213
`configure' looks for `PREFIX/share/config.site' if it exists, then
214
`PREFIX/etc/config.site' if it exists. Or, you can set the
215
`CONFIG_SITE' environment variable to the location of the site script.
216
A warning: not all `configure' scripts look for a site script.
221
Variables not defined in a site shell script can be set in the
222
environment passed to `configure'. However, some packages may run
223
configure again during the build, and the customized values of these
224
variables may be lost. In order to avoid this problem, you should set
225
them in the `configure' command line, using `VAR=value'. For example:
227
./configure CC=/usr/local2/bin/gcc
229
causes the specified `gcc' to be used as the C compiler (unless it is
230
overridden in the site shell script).
232
Unfortunately, this technique does not work for `CONFIG_SHELL' due to
233
an Autoconf bug. Until the bug is fixed you can use this workaround:
235
CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
237
`configure' Invocation
238
======================
240
`configure' recognizes the following options to control how it
245
Print a summary of all of the options to `configure', and exit.
249
Print a summary of the options unique to this package's
250
`configure', and exit. The `short' variant lists options used
251
only in the top level, while the `recursive' variant lists options
252
also present in any nested packages.
256
Print the version of Autoconf used to generate the `configure'
260
Enable the cache: use and save the results of the tests in FILE,
261
traditionally `config.cache'. FILE defaults to `/dev/null' to
266
Alias for `--cache-file=config.cache'.
271
Do not print messages saying which checks are being made. To
272
suppress all normal output, redirect it to `/dev/null' (any error
273
messages will still be shown).
276
Look for the package's source code in directory DIR. Usually
277
`configure' can determine that directory automatically.
280
Use DIR as the installation prefix. *Note Installation Names::
281
for more details, including other options available for fine-tuning
282
the installation locations.
286
Run the configure checks, but stop before creating any output
289
`configure' also accepts some other, not widely useful, options. Run
290
`configure --help' for more details.
added
removed
.pc/debian-changes-1:2.30.3-0ubuntu8/INSTALL
