1
#################################################
2
# Sample OpenVPN 2.0 config file for #
3
# multi-client server. #
5
# This file is for the server side #
6
# of a many-clients <-> one-server #
7
# OpenVPN configuration. #
9
# OpenVPN also supports #
10
# single-machine <-> single-machine #
11
# configurations (See the Examples page #
12
# on the web site for more info). #
14
# This config should work on Windows #
15
# or Linux/BSD systems. Remember on #
16
# Windows to quote pathnames and use #
17
# double backslashes, e.g.: #
18
# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
20
# Comments are preceded with '#' or ';' #
21
#################################################
23
# Which local IP address should OpenVPN
24
# listen on? (optional)
27
# Which TCP/UDP port should OpenVPN listen on?
28
# If you want to run multiple OpenVPN instances
29
# on the same machine, use a different port
30
# number for each one. You will need to
31
# open up this port on your firewall.
38
# "dev tun" will create a routed IP tunnel,
39
# "dev tap" will create an ethernet tunnel.
40
# Use "dev tap0" if you are ethernet bridging
41
# and have precreated a tap0 virtual interface
42
# and bridged it with your ethernet interface.
43
# If you want to control access policies
44
# over the VPN, you must create firewall
45
# rules for the the TUN/TAP interface.
46
# On non-Windows systems, you can give
47
# an explicit unit number, such as tun0.
48
# On Windows, use "dev-node" for this.
49
# On most systems, the VPN will not function
50
# unless you partially or fully disable
51
# the firewall for the TUN/TAP interface.
55
# Windows needs the TAP-Win32 adapter name
56
# from the Network Connections panel if you
57
# have more than one. On XP SP2 or higher,
58
# you may need to selectively disable the
59
# Windows firewall for the TAP adapter.
60
# Non-Windows systems usually don't need this.
63
# SSL/TLS root certificate (ca), certificate
64
# (cert), and private key (key). Each client
65
# and the server must have their own cert and
66
# key file. The server and all clients will
67
# use the same ca file.
69
# See the "easy-rsa" directory for a series
70
# of scripts for generating RSA certificates
71
# and private keys. Remember to use
72
# a unique Common Name for the server
73
# and each of the client certificates.
75
# Any X509 key management system can be used.
76
# OpenVPN can also use a PKCS #12 formatted key file
77
# (see "pkcs12" directive in man page).
80
key server.key # This file should be kept secret
82
# Diffie hellman parameters.
83
# Generate your own with:
84
# openssl dhparam -out dh1024.pem 1024
85
# Substitute 2048 for 1024 if you are using
89
# Configure server mode and supply a VPN subnet
90
# for OpenVPN to draw client addresses from.
91
# The server will take 10.8.0.1 for itself,
92
# the rest will be made available to clients.
93
# Each client will be able to reach the server
94
# on 10.8.0.1. Comment this line out if you are
95
# ethernet bridging. See the man page for more info.
96
server 10.8.0.0 255.255.255.0
98
# Maintain a record of client <-> virtual IP address
99
# associations in this file. If OpenVPN goes down or
100
# is restarted, reconnecting clients can be assigned
101
# the same virtual IP address from the pool that was
102
# previously assigned.
103
ifconfig-pool-persist ipp.txt
105
# Configure server mode for ethernet bridging.
106
# You must first use your OS's bridging capability
107
# to bridge the TAP interface with the ethernet
108
# NIC interface. Then you must manually set the
109
# IP/netmask on the bridge interface, here we
110
# assume 10.8.0.4/255.255.255.0. Finally we
111
# must set aside an IP range in this subnet
112
# (start=10.8.0.50 end=10.8.0.100) to allocate
113
# to connecting clients. Leave this line commented
114
# out unless you are ethernet bridging.
115
;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100
117
# Configure server mode for ethernet bridging
118
# using a DHCP-proxy, where clients talk
119
# to the OpenVPN server-side DHCP server
120
# to receive their IP address allocation
121
# and DNS server addresses. You must first use
122
# your OS's bridging capability to bridge the TAP
123
# interface with the ethernet NIC interface.
124
# Note: this mode only works on clients (such as
125
# Windows), where the client-side TAP adapter is
126
# bound to a DHCP client.
129
# Push routes to the client to allow it
130
# to reach other private subnets behind
131
# the server. Remember that these
132
# private subnets will also need
133
# to know to route the OpenVPN client
134
# address pool (10.8.0.0/255.255.255.0)
135
# back to the OpenVPN server.
136
;push "route 192.168.10.0 255.255.255.0"
137
;push "route 192.168.20.0 255.255.255.0"
139
# To assign specific IP addresses to specific
140
# clients or if a connecting client has a private
141
# subnet behind it that should also have VPN access,
142
# use the subdirectory "ccd" for client-specific
143
# configuration files (see man page for more info).
145
# EXAMPLE: Suppose the client
146
# having the certificate common name "Thelonious"
147
# also has a small subnet behind his connecting
148
# machine, such as 192.168.40.128/255.255.255.248.
149
# First, uncomment out these lines:
150
;client-config-dir ccd
151
;route 192.168.40.128 255.255.255.248
152
# Then create a file ccd/Thelonious with this line:
153
# iroute 192.168.40.128 255.255.255.248
154
# This will allow Thelonious' private subnet to
155
# access the VPN. This example will only work
156
# if you are routing, not bridging, i.e. you are
157
# using "dev tun" and "server" directives.
159
# EXAMPLE: Suppose you want to give
160
# Thelonious a fixed VPN IP address of 10.9.0.1.
161
# First uncomment out these lines:
162
;client-config-dir ccd
163
;route 10.9.0.0 255.255.255.252
164
# Then add this line to ccd/Thelonious:
165
# ifconfig-push 10.9.0.1 10.9.0.2
167
# Suppose that you want to enable different
168
# firewall access policies for different groups
169
# of clients. There are two methods:
170
# (1) Run multiple OpenVPN daemons, one for each
171
# group, and firewall the TUN/TAP interface
172
# for each group/daemon appropriately.
173
# (2) (Advanced) Create a script to dynamically
174
# modify the firewall in response to access
175
# from different clients. See man
176
# page for more info on learn-address script.
177
;learn-address ./script
179
# If enabled, this directive will configure
180
# all clients to redirect their default
181
# network gateway through the VPN, causing
182
# all IP traffic such as web browsing and
183
# and DNS lookups to go through the VPN
184
# (The OpenVPN server machine may need to NAT
185
# or bridge the TUN/TAP interface to the internet
186
# in order for this to work properly).
187
;push "redirect-gateway def1 bypass-dhcp"
189
# Certain Windows-specific network settings
190
# can be pushed to clients, such as DNS
191
# or WINS server addresses. CAVEAT:
192
# http://openvpn.net/faq.html#dhcpcaveats
193
# The addresses below refer to the public
194
# DNS servers provided by opendns.com.
195
;push "dhcp-option DNS 208.67.222.222"
196
;push "dhcp-option DNS 208.67.220.220"
198
# Uncomment this directive to allow different
199
# clients to be able to "see" each other.
200
# By default, clients will only see the server.
201
# To force clients to only see the server, you
202
# will also need to appropriately firewall the
203
# server's TUN/TAP interface.
206
# Uncomment this directive if multiple clients
207
# might connect with the same certificate/key
208
# files or common names. This is recommended
209
# only for testing purposes. For production use,
210
# each client should have its own certificate/key
213
# IF YOU HAVE NOT GENERATED INDIVIDUAL
214
# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
215
# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
216
# UNCOMMENT THIS LINE OUT.
219
# The keepalive directive causes ping-like
220
# messages to be sent back and forth over
221
# the link so that each side knows when
222
# the other side has gone down.
223
# Ping every 10 seconds, assume that remote
224
# peer is down if no ping received during
225
# a 120 second time period.
228
# For extra security beyond that provided
229
# by SSL/TLS, create an "HMAC firewall"
230
# to help block DoS attacks and UDP port flooding.
233
# openvpn --genkey --secret ta.key
235
# The server and each client must have
236
# a copy of this key.
237
# The second parameter should be '0'
238
# on the server and '1' on the clients.
239
;tls-auth ta.key 0 # This file is secret
241
# Select a cryptographic cipher.
242
# This config item must be copied to
243
# the client config file as well.
244
;cipher BF-CBC # Blowfish (default)
245
;cipher AES-128-CBC # AES
246
;cipher DES-EDE3-CBC # Triple-DES
248
# Enable compression on the VPN link.
249
# If you enable it here, you must also
250
# enable it in the client config file.
253
# The maximum number of concurrently connected
254
# clients we want to allow.
257
# It's a good idea to reduce the OpenVPN
258
# daemon's privileges after initialization.
260
# You can uncomment this out on
261
# non-Windows systems.
265
# The persist options will try to avoid
266
# accessing certain resources on restart
267
# that may no longer be accessible because
268
# of the privilege downgrade.
272
# Output a short status file showing
273
# current connections, truncated
274
# and rewritten every minute.
275
status openvpn-status.log
277
# By default, log messages will go to the syslog (or
278
# on Windows, if running as a service, they will go to
279
# the "\Program Files\OpenVPN\log" directory).
280
# Use log or log-append to override this default.
281
# "log" will truncate the log file on OpenVPN startup,
282
# while "log-append" will append to it. Use one
283
# or the other (but not both).
285
;log-append openvpn.log
287
# Set the appropriate level of log
290
# 0 is silent, except for fatal errors
291
# 4 is reasonable for general usage
292
# 5 and 6 can help to debug connection problems
293
# 9 is extremely verbose
296
# Silence repeating messages. At most 20
297
# sequential messages of the same message
298
# category will be output to the log.