1
% texinfo.tex -- TeX macros to handle Texinfo files.
3
% Load plain if necessary, i.e., if running under initex.
4
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
6
\def\texinfoversion{2001-07-31.06}
8
% Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99,
9
% 2000, 01 Free Software Foundation, Inc.
11
% This texinfo.tex file is free software; you can redistribute it and/or
12
% modify it under the terms of the GNU General Public License as
13
% published by the Free Software Foundation; either version 2, or (at
14
% your option) any later version.
16
% This texinfo.tex file is distributed in the hope that it will be
17
% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
18
% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
19
% General Public License for more details.
21
% You should have received a copy of the GNU General Public License
22
% along with this texinfo.tex file; see the file COPYING. If not, write
23
% to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
24
% Boston, MA 02111-1307, USA.
26
% In other words, you are welcome to use, share and improve this program.
27
% You are forbidden to forbid anyone else to use, share and improve
28
% what you give them. Help stamp out software-hoarding!
30
% Please try the latest version of texinfo.tex before submitting bug
31
% reports; you can get the latest version from:
32
% ftp://ftp.gnu.org/gnu/texinfo.tex
33
% (and all GNU mirrors, see http://www.gnu.org/order/ftp.html)
34
% ftp://texinfo.org/texinfo/texinfo.tex
35
% ftp://tug.org/tex/texinfo.tex
36
% (and all CTAN mirrors, see http://www.ctan.org),
37
% and /home/gd/gnu/doc/texinfo.tex on the GNU machines.
39
% The texinfo.tex in any given Texinfo distribution could well be out
40
% of date, so if that's what you're using, please check.
42
% Texinfo has a small home page at http://texinfo.org/ and also
43
% http://www.gnu.org/software/texinfo.
45
% Send bug reports to bug-texinfo@gnu.org. Please include including a
46
% complete document in each bug report with which we can reproduce the
47
% problem. Patches are, of course, greatly appreciated.
49
% To process a Texinfo manual with TeX, it's most reliable to use the
50
% texi2dvi shell script that comes with the distribution. For a simple
51
% manual foo.texi, however, you can get away with this:
56
% dvips foo.dvi -o # or whatever, to process the dvi file; this makes foo.ps.
57
% The extra runs of TeX get the cross-reference information correct.
58
% Sometimes one run after texindex suffices, and sometimes you need more
59
% than two; texi2dvi does it as many times as necessary.
61
% It is possible to adapt texinfo.tex for other languages. You can get
62
% the existing language-specific files from ftp://ftp.gnu.org/gnu/texinfo/.
64
\message{Loading texinfo [version \texinfoversion]:}
66
% If in a .fmt file, print the version number
67
% and turn on active characters that we couldn't do earlier because
68
% they might have appeared in the input file name.
69
\everyjob{\message{[Texinfo version \texinfoversion]}%
70
\catcode`+=\active \catcode`\_=\active}
72
% Save some parts of plain tex whose names we will redefine.
74
\let\ptexbullet=\bullet
88
% We never want plain's outer \+ definition in Texinfo.
89
% For @tex, we can use \tabalign.
95
% If this character appears in an error message or help string, it
96
% starts a new line in the output.
99
% Set up fixed words for English if not already set.
100
\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
101
\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi
102
\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi
103
\ifx\putwordin\undefined \gdef\putwordin{in}\fi
104
\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
105
\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
106
\ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi
107
\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
108
\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi
109
\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi
110
\ifx\putwordof\undefined \gdef\putwordof{of}\fi
111
\ifx\putwordon\undefined \gdef\putwordon{on}\fi
112
\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi
113
\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi
114
\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi
115
\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi
116
\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi
117
\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi
118
\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi
120
\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
121
\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
122
\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
123
\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
124
\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
125
\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
126
\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
127
\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
128
\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
129
\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
130
\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
131
\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
133
\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi
134
\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi
135
\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi
136
\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi
137
\ifx\putwordDeftypevar\undefined\gdef\putwordDeftypevar{Variable}\fi
138
\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi
139
\ifx\putwordDeftypefun\undefined\gdef\putwordDeftypefun{Function}\fi
145
\hyphenation{ap-pen-dix}
146
\hyphenation{mini-buf-fer mini-buf-fers}
148
\hyphenation{white-space}
150
% Margin to add to right of even pages, to left of odd pages.
151
\newdimen \bindingoffset
152
\newdimen \normaloffset
153
\newdimen\pagewidth \newdimen\pageheight
155
% Sometimes it is convenient to have everything in the transcript file
156
% and nothing on the terminal. We don't just call \tracingall here,
157
% since that produces some useless output on the terminal.
159
\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
160
\ifx\eTeXversion\undefined
161
\def\loggingall{\tracingcommands2 \tracingstats2
162
\tracingpages1 \tracingoutput1 \tracinglostchars1
163
\tracingmacros2 \tracingparagraphs1 \tracingrestores1
164
\showboxbreadth\maxdimen\showboxdepth\maxdimen
167
\def\loggingall{\tracingcommands3 \tracingstats2
168
\tracingpages1 \tracingoutput1 \tracinglostchars1
169
\tracingmacros2 \tracingparagraphs1 \tracingrestores1
170
\tracingscantokens1 \tracingassigns1 \tracingifs1
171
\tracinggroups1 \tracingnesting2
172
\showboxbreadth\maxdimen\showboxdepth\maxdimen
176
% add check for \lastpenalty to plain's definitions. If the last thing
177
% we did was a \nobreak, we don't want to insert more space.
179
\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount
180
\removelastskip\penalty-50\smallskip\fi\fi}
181
\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount
182
\removelastskip\penalty-100\medskip\fi\fi}
183
\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
184
\removelastskip\penalty-200\bigskip\fi\fi}
186
% For @cropmarks command.
187
% Do @cropmarks to get crop marks.
190
\let\cropmarks = \cropmarkstrue
192
% Dimensions to add cropmarks at corners.
193
% Added by P. A. MacKay, 12 Nov. 1986
195
\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
196
\newdimen\cornerlong \cornerlong=1pc
197
\newdimen\cornerthick \cornerthick=.3pt
198
\newdimen\topandbottommargin \topandbottommargin=.75in
200
% Main output routine.
202
\output = {\onepageout{\pagecontents\PAGE}}
207
% \onepageout takes a vbox as an argument. Note that \pagecontents
208
% does insertions, but you have to call it yourself.
210
\ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
212
\ifodd\pageno \advance\hoffset by \bindingoffset
213
\else \advance\hoffset by -\bindingoffset\fi
215
% Do this outside of the \shipout so @code etc. will be expanded in
216
% the headline as they should be, not taken literally (outputting ''code).
217
\setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
218
\setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
221
% Have to do this stuff outside the \shipout because we want it to
222
% take effect in \write's, yet the group defined by the \vbox ends
223
% before the \shipout runs.
225
\escapechar = `\\ % use backslash in output files.
226
\indexdummies % don't expand commands in the output.
227
\normalturnoffactive % \ in index entries must not stay \, e.g., if
228
% the page break happens to be in the middle of an example.
230
% Do this early so pdf references go to the beginning of the page.
231
\ifpdfmakepagedest \pdfmkdest{\the\pageno} \fi
233
\ifcropmarks \vbox to \outervsize\bgroup
235
\vskip-\topandbottommargin
237
\line{\ewtop\hfil\ewtop}%
240
\vbox{\moveleft\cornerthick\nstop}%
242
\vbox{\moveright\cornerthick\nstop}%
245
\vskip\topandbottommargin
247
\hfil % center the page within the outer (page) hsize.
248
\ifodd\pageno\hskip\bindingoffset\fi
254
\ifdim\ht\footlinebox > 0pt
255
% Only leave this space if the footline is nonempty.
256
% (We lessened \vsize for it in \oddfootingxxx.)
257
% The \baselineskip=24pt in plain's \makefootline has no effect.
258
\vskip 2\baselineskip
263
\egroup % end of \vbox\bgroup
264
\hfil\egroup % end of (centering) \line\bgroup
265
\vskip\topandbottommargin plus1fill minus1fill
266
\boxmaxdepth = \cornerthick
269
\vbox{\moveleft\cornerthick\nsbot}%
271
\vbox{\moveright\cornerthick\nsbot}%
274
\line{\ewbot\hfil\ewbot}%
276
\egroup % \vbox from first cropmarks clause
278
}% end of \shipout\vbox
279
}% end of group with \turnoffactive
281
\ifnum\outputpenalty>-20000 \else\dosupereject\fi
284
\newinsert\margin \dimen\margin=\maxdimen
286
\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
288
\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
289
% marginal hacks, juha@viisa.uucp (Juha Takala)
290
\ifvoid\margin\else % marginal info is present
291
\rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
292
\dimen@=\dp#1 \unvbox#1
293
\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
294
\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
297
% Here are the rules for the cropmarks. Note that they are
298
% offset so that the space between them is truly \outerhsize or \outervsize
299
% (P. A. MacKay, 12 November, 1986)
301
\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
303
{\hrule height\cornerthick depth\cornerlong width\cornerthick}}
304
\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
306
{\hrule height\cornerlong depth\cornerthick width\cornerthick}}
308
% Parse an argument, then pass it to #1. The argument is the rest of
309
% the input line (except we remove a trailing comment). #1 should be a
310
% macro which expects an ordinary undelimited TeX argument.
316
\futurelet\temp\parseargx
319
% If the next token is an obeyed space (from an @example environment or
320
% the like), remove it and recurse. Otherwise, we're done.
322
% \obeyedspace is defined far below, after the definition of \sepspaces.
323
\ifx\obeyedspace\temp
324
\expandafter\parseargdiscardspace
326
\expandafter\parseargline
330
% Remove a single space (as the delimiter token to the macro call).
332
\gdef\parseargdiscardspace {\futurelet\temp\parseargx}}
335
\gdef\parseargline#1^^M{%
336
\endgroup % End of the group started in \parsearg.
338
% First remove any @c comment, then any @comment.
339
% Result of each macro is put in \toks0.
340
\argremovec #1\c\relax %
341
\expandafter\argremovecomment \the\toks0 \comment\relax %
343
% Call the caller's macro, saved as \next in \parsearg.
344
\expandafter\next\expandafter{\the\toks0}%
348
% Since all \c{,omment} does is throw away the argument, we can let TeX
349
% do that for us. The \relax here is matched by the \relax in the call
350
% in \parseargline; it could be more or less anything, its purpose is
351
% just to delimit the argument to the \c.
352
\def\argremovec#1\c#2\relax{\toks0 = {#1}}
353
\def\argremovecomment#1\comment#2\relax{\toks0 = {#1}}
355
% \argremovec{,omment} might leave us with trailing spaces, though; e.g.,
356
% @end itemize @c foo
357
% will have two active spaces as part of the argument with the
358
% `itemize'. Here we remove all active spaces from #1, and assign the
361
% This loses if there are any *other* active characters besides spaces
362
% in the argument -- _ ^ +, for example -- since they get expanded.
363
% Fortunately, Texinfo does not define any such commands. (If it ever
364
% does, the catcode of the characters in questionwill have to be changed
365
% here.) But this means we cannot call \removeactivespaces as part of
366
% \argremovec{,omment}, since @c uses \parsearg, and thus the argument
367
% that \parsearg gets might well have any character at all in it.
369
\def\removeactivespaces#1{%
373
\global\toks0 = \expandafter{\temp}%
377
% Change the active space to expand to nothing.
381
\gdef\ignoreactivespaces{\obeyspaces\let =\empty}
385
\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
387
%% These are used to keep @begin/@end levels from running away
388
%% Call \inENV within environments (after a \begingroup)
389
\newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi}
391
\ifENV\errmessage{Still within an environment; press RETURN to continue}
392
\endgroup\fi} % This is not perfect, but it should reduce lossage
394
% @begin foo is the same as @foo, for now.
395
\newhelp\EMsimple{Press RETURN to continue.}
397
\outer\def\begin{\parsearg\beginxxx}
400
\expandafter\ifx\csname #1\endcsname\relax
401
{\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else
402
\csname #1\endcsname\fi}
404
% @end foo executes the definition of \Efoo.
406
\def\end{\parsearg\endxxx}
408
\removeactivespaces{#1}%
409
\edef\endthing{\the\toks0}%
411
\expandafter\ifx\csname E\endthing\endcsname\relax
412
\expandafter\ifx\csname \endthing\endcsname\relax
413
% There's no \foo, i.e., no ``environment'' foo.
415
\errmessage{Undefined command `@end \endthing'}%
417
\unmatchedenderror\endthing
420
% Everything's ok; the right environment has been started.
421
\csname E\endthing\endcsname
425
% There is an environment #1, but it hasn't been started. Give an error.
427
\def\unmatchedenderror#1{%
429
\errmessage{This `@end #1' doesn't have a matching `@#1'}%
432
% Define the control sequence \E#1 to give an unmatched @end error.
434
\def\defineunmatchedend#1{%
435
\expandafter\def\csname E#1\endcsname{\unmatchedenderror{#1}}%
439
% Single-spacing is done by various environments (specifically, in
440
% \nonfillstart and \quotations).
441
\newskip\singlespaceskip \singlespaceskip = 12.5pt
443
% Why was this kern here? It messes up equalizing space above and below
444
% environments. --karl, 6may93
445
%{\advance \baselineskip by -\singlespaceskip
446
%\kern \baselineskip}%
447
\setleading\singlespaceskip
450
%% Simple single-character @ commands
453
% Kludge this until the fonts are right (grr).
456
% This is turned off because it was never documented
457
% and you can use @w{...} around a quote to suppress ligatures.
458
%% Define @` and @' to be the same as ` and '
459
%% but suppressing ligatures.
463
% Used to generate quoted braces.
464
\def\mylbrace {{\tt\char123}}
465
\def\myrbrace {{\tt\char125}}
469
% Definitions to produce actual \{ & \} command in an index.
470
\catcode`\{ = 12 \catcode`\} = 12
471
\catcode`\[ = 1 \catcode`\] = 2
472
\catcode`\@ = 0 \catcode`\\ = 12
477
% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
478
% Others are defined by plain TeX: @` @' @" @^ @~ @= @v @H.
481
\def\ringaccent#1{{\accent23 #1}}
486
% Other special characters: @questiondown @exclamdown
487
% Plain TeX defines: @AA @AE @O @OE @L (and lowercase versions) @ss.
488
\def\questiondown{?`}
491
% Dotless i and dotless j, used for accents.
496
\ifx\temp\imacro \ptexi
497
\else\ifx\temp\jmacro \j
498
\else \errmessage{@dotless can be used only with i or j}%
502
% Be sure we're in horizontal mode when doing a tie, since we make space
503
% equivalent to this in @example-like environments. Otherwise, a space
504
% at the beginning of a line will start with \penalty -- and
505
% since \penalty is valid in vertical mode, we'd end up putting the
506
% penalty on the vertical list instead of in the new paragraph.
508
% Avoid using \@M directly, because that causes trouble
509
% if the definition is written into an index file.
510
\global\let\tiepenalty = \@M
511
\gdef\tie{\leavevmode\penalty\tiepenalty\ }
514
% @: forces normal size whitespace following.
515
\def\:{\spacefactor=1000 }
517
% @* forces a line break.
518
\def\*{\hfil\break\hbox{}\ignorespaces}
520
% @. is an end-of-sentence period.
521
\def\.{.\spacefactor=3000 }
523
% @! is an end-of-sentence bang.
524
\def\!{!\spacefactor=3000 }
526
% @? is an end-of-sentence query.
527
\def\?{?\spacefactor=3000 }
529
% @w prevents a word break. Without the \leavevmode, @w at the
530
% beginning of a paragraph, when TeX is still in vertical mode, would
531
% produce a whole line of output instead of starting the paragraph.
532
\def\w#1{\leavevmode\hbox{#1}}
534
% @group ... @end group forces ... to be all on one page, by enclosing
535
% it in a TeX vbox. We use \vtop instead of \vbox to construct the box
536
% to keep its height that of a normal line. According to the rules for
537
% \topskip (p.114 of the TeXbook), the glue inserted is
538
% max (\topskip - \ht (first item), 0). If that height is large,
539
% therefore, no glue is inserted, and the space between the headline and
540
% the text is small, which looks bad.
542
\def\group{\begingroup
543
\ifnum\catcode13=\active \else
544
\errhelp = \groupinvalidhelp
545
\errmessage{@group invalid in context where filling is enabled}%
548
% The \vtop we start below produces a box with normal height and large
549
% depth; thus, TeX puts \baselineskip glue before it, and (when the
550
% next line of text is done) \lineskip glue after it. (See p.82 of
551
% the TeXbook.) Thus, space below is not quite equal to space
552
% above. But it's pretty close.
554
\egroup % End the \vtop.
555
\endgroup % End the \group.
559
% We have to put a strut on the last line in case the @group is in
560
% the midst of an example, rather than completely enclosing it.
561
% Otherwise, the interline space between the last line of the group
562
% and the first line afterwards is too small. But we can't put the
563
% strut in \Egroup, since there it would be on a line by itself.
564
% Hence this just inserts a strut at the beginning of each line.
565
\everypar = {\strut}%
567
% Since we have a strut on every line, we don't need any of TeX's
568
% normal interline spacing.
571
% OK, but now we have to do something about blank
572
% lines in the input in @example-like environments, which normally
573
% just turn into \lisppar, which will insert no space now that we've
574
% turned off the interline space. Simplest is to make them be an
577
\edef\par{\leavevmode \par}%
579
% Reset ^^M's definition to new definition of \par.
583
% Do @comment since we are called inside an environment such as
584
% @example, where each end-of-line in the input causes an
585
% end-of-line in the output. We don't want the end-of-line after
586
% the `@group' to put extra space in the output. Since @group
587
% should appear on a line by itself (according to the Texinfo
588
% manual), we don't worry about eating any user text.
592
% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
593
% message, so this ends up printing `@group can only ...'.
595
\newhelp\groupinvalidhelp{%
596
group can only be used in environments such as @example,^^J%
597
where each line of input produces a line of output.}
599
% @need space-in-mils
600
% forces a page break if there is not space-in-mils remaining.
602
\newdimen\mil \mil=0.001in
604
\def\need{\parsearg\needx}
606
% Old definition--didn't work.
607
%\def\needx #1{\par %
608
%% This method tries to make TeX break the page naturally
609
%% if the depth of the box does not fit.
611
%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak
616
% Ensure vertical mode, so we don't make a big box in the middle of a
620
% If the @need value is less than one line space, it's useless.
622
\dimen2 = \ht\strutbox
623
\advance\dimen2 by \dp\strutbox
624
\ifdim\dimen0 > \dimen2
626
% Do a \strut just to make the height of this box be normal, so the
627
% normal leading is inserted relative to the preceding line.
628
% And a page break here is fine.
629
\vtop to #1\mil{\strut\vfil}%
631
% TeX does not even consider page breaks if a penalty added to the
632
% main vertical list is 10000 or more. But in order to see if the
633
% empty box we just added fits on the page, we must make it consider
634
% page breaks. On the other hand, we don't want to actually break the
635
% page after the empty box. So we use a penalty of 9999.
637
% There is an extremely small chance that TeX will actually break the
638
% page at this \penalty, if there are no other feasible breakpoints in
639
% sight. (If the user is using lots of big @group commands, which
640
% almost-but-not-quite fill up a page, TeX will have a hard time doing
641
% good page breaking, for example.) However, I could not construct an
642
% example where a page broke at this \penalty; if it happens in a real
643
% document, then we can reconsider our strategy.
646
% Back up by the size of the box, whether we did a page break or not.
649
% Do not allow a page break right after this kern.
654
% @br forces paragraph break
658
% @dots{} output an ellipsis using the current font.
659
% We do .5em per period so that it has the same spacing in a typewriter
660
% font as three actual period characters.
665
\hskip 0pt plus 0.25fil minus 0.25fil
667
\hskip 0pt plus 0.5fil minus 0.5fil
671
% @enddots{} is an end-of-sentence ellipsis.
676
\hskip 0pt plus 0.25fil minus 0.25fil
678
\hskip 0pt plus 0.5fil minus 0.5fil
684
% @page forces the start of a new page
686
\def\page{\par\vfill\supereject}
689
% outputs text on separate line in roman font, starting at standard page margin
691
% This records the amount of indent in the innermost environment.
692
% That's how much \exdent should take out.
693
\newskip\exdentamount
695
% This defn is used inside fill environments such as @defun.
696
\def\exdent{\parsearg\exdentyyy}
697
\def\exdentyyy #1{{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}}
699
% This defn is used inside nofill environments such as @example.
700
\def\nofillexdent{\parsearg\nofillexdentyyy}
701
\def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount
702
\leftline{\hskip\leftskip{\rm#1}}}}
704
% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
705
% paragraph. For more general purposes, use the \margin insertion
706
% class. WHICH is `l' or `r'.
708
\newskip\inmarginspacing \inmarginspacing=1cm
709
\def\strutdepth{\dp\strutbox}
711
\def\doinmargin#1#2{\strut\vadjust{%
714
\vtop to \strutdepth{%
715
\baselineskip=\strutdepth
717
% if you have multiple lines of stuff to put here, you'll need to
718
% make the vbox yourself of the appropriate size.
720
\llap{\ignorespaces #2\hskip\inmarginspacing}%
722
\rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}%
727
\def\inleftmargin{\doinmargin l}
728
\def\inrightmargin{\doinmargin r}
730
% @inmargin{TEXT [, RIGHT-TEXT]}
731
% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right;
732
% else use TEXT for both).
734
\def\inmargin#1{\parseinmargin #1,,\finish}
735
\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing.
736
\setbox0 = \hbox{\ignorespaces #2}%
738
\def\lefttext{#1}% have both texts
741
\def\lefttext{#1}% have only one text
746
\def\temp{\inrightmargin\righttext}% odd page -> outside is right margin
748
\def\temp{\inleftmargin\lefttext}%
753
% @include file insert text of that file as input.
754
% Allow normal characters that we make active in the argument (a file name).
755
\def\include{\begingroup
764
\parsearg\includezzz}
765
% Restore active chars for included file.
766
\def\includezzz#1{\endgroup\begingroup
767
% Read the included file in a group so nested @include's work.
774
% @center line outputs that line, centered
776
\def\center{\parsearg\centerzzz}
777
\def\centerzzz #1{{\advance\hsize by -\leftskip
778
\advance\hsize by -\rightskip
781
% @sp n outputs n lines of vertical space
783
\def\sp{\parsearg\spxxx}
784
\def\spxxx #1{\vskip #1\baselineskip}
786
% @comment ...line which is ignored...
787
% @c is the same as @comment
788
% @ignore ... @end ignore is another way to write a comment
790
\def\comment{\begingroup \catcode`\^^M=\other%
791
\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
793
{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
797
% @paragraphindent NCHARS
798
% We'll use ems for NCHARS, close enough.
799
% We cannot implement @paragraphindent asis, though.
801
\def\asisword{asis} % no translation, these are keywords
804
\def\paragraphindent{\parsearg\doparagraphindent}
805
\def\doparagraphindent#1{%
810
\defaultparindent = 0pt
812
\defaultparindent = #1em
815
\parindent = \defaultparindent
818
% @exampleindent NCHARS
819
% We'll use ems for NCHARS like @paragraphindent.
820
% It seems @exampleindent asis isn't necessary, but
821
% I preserve it to make it similar to @paragraphindent.
822
\def\exampleindent{\parsearg\doexampleindent}
823
\def\doexampleindent#1{%
830
\lispnarrowing = #1em
835
% @asis just yields its argument. Used with @table, for example.
839
% @math means output in math mode.
840
% We don't use $'s directly in the definition of \math because control
841
% sequences like \math are expanded when the toc file is written. Then,
842
% we read the toc file back, the $'s will be normal characters (as they
843
% should be, according to the definition of Texinfo). So we must use a
844
% control sequence to switch into and out of math mode.
846
% This isn't quite enough for @math to work properly in indices, but it
847
% seems unlikely it will ever be needed there.
849
\let\implicitmath = $
850
\def\math#1{\implicitmath #1\implicitmath}
852
% @bullet and @minus need the same treatment as @math, just above.
853
\def\bullet{\implicitmath\ptexbullet\implicitmath}
854
\def\minus{\implicitmath-\implicitmath}
856
% @refill is a no-op.
859
% If working on a large document in chapters, it is convenient to
860
% be able to disable indexing, cross-referencing, and contents, for test runs.
861
% This is done with @novalidate (before @setfilename).
863
\newif\iflinks \linkstrue % by default we want the aux files.
864
\let\novalidate = \linksfalse
866
% @setfilename is done at the beginning of every texinfo file.
867
% So open here the files we need to have open while reading the input.
868
% This makes it possible to make a .fmt file for texinfo.
872
\fi % \openindices needs to do some work in any case.
874
\fixbackslash % Turn off hack to swallow `\input texinfo'.
875
\global\let\setfilename=\comment % Ignore extra @setfilename cmds.
877
% If texinfo.cnf is present on the system, read it.
878
% Useful for site-wide @afourpaper, etc.
879
% Just to be on the safe side, close the input stream before the \input.
880
\openin 1 texinfo.cnf
881
\ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi
885
\comment % Ignore the actual filename.
888
% Called from \setfilename.
900
\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
904
% adobe `portable' document format
908
\newcount\filenamelength
917
\newif\ifpdfmakepagedest
919
\ifx\pdfoutput\undefined
921
\let\pdfmkdest = \gobble
922
\let\pdfurl = \gobble
923
\let\endlink = \relax
924
\let\linkcolor = \relax
925
\let\pdfmakeoutlines = \relax
930
\def\dopdfimage#1#2#3{%
932
\def\imageheight{#3}%
933
\ifnum\pdftexversion < 14
938
\ifx\empty\imagewidth\else width \imagewidth \fi
939
\ifx\empty\imageheight\else height \imageheight \fi
940
\ifnum\pdftexversion<13
945
\ifnum\pdftexversion < 14 \else
946
\pdfrefximage \pdflastximage
948
\def\pdfmkdest#1{{\normalturnoffactive \pdfdest name{#1} xyz}}
950
\let\linkcolor = \Blue % was Cyan, but that seems light?
951
\def\endlink{\Black\pdfendlink}
952
% Adding outlines to PDF; macros for calculating structure of outlines
953
% come from Petr Olsak
954
\def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
955
\else \csname#1\endcsname \fi}
956
\def\advancenumber#1{\tempnum=\expnumber{#1}\relax
958
\expandafter\xdef\csname#1\endcsname{\the\tempnum}}
959
\def\pdfmakeoutlines{{%
960
\openin 1 \jobname.toc
965
\let\_ = \normalunderscore
966
% Thanh's hack / proper braces in bookmarks
967
\edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
968
\edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
970
\def\chapentry ##1##2##3{}
971
\def\unnumbchapentry ##1##2{}
972
\def\secentry ##1##2##3##4{\advancenumber{chap##2}}
973
\def\unnumbsecentry ##1##2{}
974
\def\subsecentry ##1##2##3##4##5{\advancenumber{sec##2.##3}}
975
\def\unnumbsubsecentry ##1##2{}
976
\def\subsubsecentry ##1##2##3##4##5##6{\advancenumber{subsec##2.##3.##4}}
977
\def\unnumbsubsubsecentry ##1##2{}
979
\def\chapentry ##1##2##3{%
980
\pdfoutline goto name{\pdfmkpgn{##3}}count-\expnumber{chap##2}{##1}}
981
\def\unnumbchapentry ##1##2{%
982
\pdfoutline goto name{\pdfmkpgn{##2}}{##1}}
983
\def\secentry ##1##2##3##4{%
984
\pdfoutline goto name{\pdfmkpgn{##4}}count-\expnumber{sec##2.##3}{##1}}
985
\def\unnumbsecentry ##1##2{%
986
\pdfoutline goto name{\pdfmkpgn{##2}}{##1}}
987
\def\subsecentry ##1##2##3##4##5{%
988
\pdfoutline goto name{\pdfmkpgn{##5}}count-\expnumber{subsec##2.##3.##4}{##1}}
989
\def\unnumbsubsecentry ##1##2{%
990
\pdfoutline goto name{\pdfmkpgn{##2}}{##1}}
991
\def\subsubsecentry ##1##2##3##4##5##6{%
992
\pdfoutline goto name{\pdfmkpgn{##6}}{##1}}
993
\def\unnumbsubsubsecentry ##1##2{%
994
\pdfoutline goto name{\pdfmkpgn{##2}}{##1}}
999
\def\params{#1}\def\E{END}%
1001
\let\nextmakelinks=\relax
1003
\let\nextmakelinks=\makelinks
1004
\ifnum\lnkcount>0,\fi
1006
\startlink attr{/Border [0 0 0]}
1007
goto name{\pdfmkpgn{\the\pgn}}%
1009
\advance\lnkcount by 1%
1014
\def\picknum#1{\expandafter\pn#1}
1025
\def\ppn#1{\pgn=#1\gobble}
1026
\def\ppnn{\pgn=\first}
1027
\def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,}
1028
\def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
1029
\def\skipspaces#1{\def\PP{#1}\def\D{|}%
1030
\ifx\PP\D\let\nextsp\relax
1031
\else\let\nextsp\skipspaces
1032
\ifx\p\space\else\addtokens{\filename}{\PP}%
1033
\advance\filenamelength by 1
1037
\def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
1038
\ifnum\pdftexversion < 14
1039
\let \startlink \pdfannotlink
1041
\let \startlink \pdfstartlink
1045
\normalturnoffactive\def\@{@}%
1046
\let\value=\expandablevalue
1048
\startlink attr{/Border [0 0 0]}%
1049
user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
1052
\def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
1053
\def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
1054
\def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
1055
\def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
1057
\expandafter\poptoks\the\toksA|ENDTOKS|
1059
\else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
1060
\else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
1061
\else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
1063
\ifnum0=\countA\else\makelink\fi
1064
\ifx\first.\let\next=\done\else
1066
\addtokens{\toksB}{\the\toksD}
1067
\ifx\first,\addtokens{\toksB}{\space}\fi
1069
\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
1071
\def\makelink{\addtokens{\toksB}%
1072
{\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
1074
\startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
1075
\linkcolor #1\endlink}
1076
\def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
1077
\fi % \ifx\pdfoutput
1081
% Font-change commands.
1083
% Texinfo sort of supports the sans serif font style, which plain TeX does not.
1084
% So we set up a \sf analogous to plain's \rm, etc.
1086
\def\sf{\fam=\sffam \tensf}
1087
\let\li = \sf % Sometimes we call it \li, not \sf.
1089
% We don't need math for this one.
1093
\newdimen\textleading \textleading = 13.2pt
1095
% Set the baselineskip to #1, and the lineskip and strut size
1096
% correspondingly. There is no deep meaning behind these magic numbers
1097
% used as factors; they just match (closely enough) what Knuth defined.
1099
\def\lineskipfactor{.08333}
1100
\def\strutheightpercent{.70833}
1101
\def\strutdepthpercent {.29167}
1104
\normalbaselineskip = #1\relax
1105
\normallineskip = \lineskipfactor\normalbaselineskip
1107
\setbox\strutbox =\hbox{%
1108
\vrule width0pt height\strutheightpercent\baselineskip
1109
depth \strutdepthpercent \baselineskip
1113
% Use Computer Modern fonts at \magstephalf (11pt).
1114
\newcount\mainmagstep \mainmagstep=\magstephalf
1116
% Set the font macro #1 to the font named #2, adding on the
1117
% specified font prefix (normally `cm').
1118
% #3 is the font's design size, #4 is a scale factor
1119
\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
1121
% Use cm as the default font prefix.
1122
% To specify the font prefix, you must define \fontprefix
1123
% before you read in texinfo.tex.
1124
\ifx\fontprefix\undefined
1127
% Support font families that don't use the same naming scheme as CM.
1129
\def\rmbshape{bx} %where the normal face is bold
1134
\def\ttslshape{sltt}
1145
\let\mainmagstep=\magstep1
1146
\setfont\textrm\rmshape{12}{1000}
1147
\setfont\texttt\ttshape{12}{1000}
1149
\setfont\textrm\rmshape{10}{\mainmagstep}
1150
\setfont\texttt\ttshape{10}{\mainmagstep}
1152
% Instead of cmb10, you many want to use cmbx10.
1153
% cmbx10 is a prettier font on its own, but cmb10
1154
% looks better when embedded in a line with cmr10.
1155
\setfont\textbf\bfshape{10}{\mainmagstep}
1156
\setfont\textit\itshape{10}{\mainmagstep}
1157
\setfont\textsl\slshape{10}{\mainmagstep}
1158
\setfont\textsf\sfshape{10}{\mainmagstep}
1159
\setfont\textsc\scshape{10}{\mainmagstep}
1160
\setfont\textttsl\ttslshape{10}{\mainmagstep}
1161
\font\texti=cmmi10 scaled \mainmagstep
1162
\font\textsy=cmsy10 scaled \mainmagstep
1164
% A few fonts for @defun, etc.
1165
\setfont\defbf\bxshape{10}{\magstep1} %was 1314
1166
\setfont\deftt\ttshape{10}{\magstep1}
1167
\def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf}
1169
% Fonts for indices, footnotes, small examples (9pt).
1170
\setfont\smallrm\rmshape{9}{1000}
1171
\setfont\smalltt\ttshape{9}{1000}
1172
\setfont\smallbf\bfshape{10}{900}
1173
\setfont\smallit\itshape{9}{1000}
1174
\setfont\smallsl\slshape{9}{1000}
1175
\setfont\smallsf\sfshape{9}{1000}
1176
\setfont\smallsc\scshape{10}{900}
1177
\setfont\smallttsl\ttslshape{10}{900}
1181
% Fonts for small examples (8pt).
1182
\setfont\smallerrm\rmshape{8}{1000}
1183
\setfont\smallertt\ttshape{8}{1000}
1184
\setfont\smallerbf\bfshape{10}{800}
1185
\setfont\smallerit\itshape{8}{1000}
1186
\setfont\smallersl\slshape{8}{1000}
1187
\setfont\smallersf\sfshape{8}{1000}
1188
\setfont\smallersc\scshape{10}{800}
1189
\setfont\smallerttsl\ttslshape{10}{800}
1190
\font\smalleri=cmmi8
1191
\font\smallersy=cmsy8
1193
% Fonts for title page:
1194
\setfont\titlerm\rmbshape{12}{\magstep3}
1195
\setfont\titleit\itbshape{10}{\magstep4}
1196
\setfont\titlesl\slbshape{10}{\magstep4}
1197
\setfont\titlett\ttbshape{12}{\magstep3}
1198
\setfont\titlettsl\ttslshape{10}{\magstep4}
1199
\setfont\titlesf\sfbshape{17}{\magstep1}
1200
\let\titlebf=\titlerm
1201
\setfont\titlesc\scbshape{10}{\magstep4}
1202
\font\titlei=cmmi12 scaled \magstep3
1203
\font\titlesy=cmsy10 scaled \magstep4
1204
\def\authorrm{\secrm}
1206
% Chapter (and unnumbered) fonts (17.28pt).
1207
\setfont\chaprm\rmbshape{12}{\magstep2}
1208
\setfont\chapit\itbshape{10}{\magstep3}
1209
\setfont\chapsl\slbshape{10}{\magstep3}
1210
\setfont\chaptt\ttbshape{12}{\magstep2}
1211
\setfont\chapttsl\ttslshape{10}{\magstep3}
1212
\setfont\chapsf\sfbshape{17}{1000}
1214
\setfont\chapsc\scbshape{10}{\magstep3}
1215
\font\chapi=cmmi12 scaled \magstep2
1216
\font\chapsy=cmsy10 scaled \magstep3
1218
% Section fonts (14.4pt).
1219
\setfont\secrm\rmbshape{12}{\magstep1}
1220
\setfont\secit\itbshape{10}{\magstep2}
1221
\setfont\secsl\slbshape{10}{\magstep2}
1222
\setfont\sectt\ttbshape{12}{\magstep1}
1223
\setfont\secttsl\ttslshape{10}{\magstep2}
1224
\setfont\secsf\sfbshape{12}{\magstep1}
1226
\setfont\secsc\scbshape{10}{\magstep2}
1227
\font\seci=cmmi12 scaled \magstep1
1228
\font\secsy=cmsy10 scaled \magstep2
1230
% \setfont\ssecrm\bxshape{10}{\magstep1} % This size an font looked bad.
1231
% \setfont\ssecit\itshape{10}{\magstep1} % The letters were too crowded.
1232
% \setfont\ssecsl\slshape{10}{\magstep1}
1233
% \setfont\ssectt\ttshape{10}{\magstep1}
1234
% \setfont\ssecsf\sfshape{10}{\magstep1}
1236
%\setfont\ssecrm\bfshape{10}{1315} % Note the use of cmb rather than cmbx.
1237
%\setfont\ssecit\itshape{10}{1315} % Also, the size is a little larger than
1238
%\setfont\ssecsl\slshape{10}{1315} % being scaled magstep1.
1239
%\setfont\ssectt\ttshape{10}{1315}
1240
%\setfont\ssecsf\sfshape{10}{1315}
1242
%\let\ssecbf=\ssecrm
1244
% Subsection fonts (13.15pt).
1245
\setfont\ssecrm\rmbshape{12}{\magstephalf}
1246
\setfont\ssecit\itbshape{10}{1315}
1247
\setfont\ssecsl\slbshape{10}{1315}
1248
\setfont\ssectt\ttbshape{12}{\magstephalf}
1249
\setfont\ssecttsl\ttslshape{10}{1315}
1250
\setfont\ssecsf\sfbshape{12}{\magstephalf}
1252
\setfont\ssecsc\scbshape{10}{\magstep1}
1253
\font\sseci=cmmi12 scaled \magstephalf
1254
\font\ssecsy=cmsy10 scaled 1315
1255
% The smallcaps and symbol fonts should actually be scaled \magstep1.5,
1256
% but that is not a standard magnification.
1258
% In order for the font changes to affect most math symbols and letters,
1259
% we have to define the \textfont of the standard families. Since
1260
% texinfo doesn't allow for producing subscripts and superscripts, we
1261
% don't bother to reset \scriptfont and \scriptscriptfont (which would
1262
% also require loading a lot more fonts).
1264
\def\resetmathfonts{%
1265
\textfont0 = \tenrm \textfont1 = \teni \textfont2 = \tensy
1266
\textfont\itfam = \tenit \textfont\slfam = \tensl \textfont\bffam = \tenbf
1267
\textfont\ttfam = \tentt \textfont\sffam = \tensf
1271
% The font-changing commands redefine the meanings of \tenSTYLE, instead
1272
% of just \STYLE. We do this so that font changes will continue to work
1273
% in math mode, where it is the current \fam that is relevant in most
1274
% cases, not the current font. Plain TeX does \def\bf{\fam=\bffam
1275
% \tenbf}, for example. By redefining \tenbf, we obviate the need to
1276
% redefine \bf itself.
1278
\let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
1279
\let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
1280
\let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl
1281
\resetmathfonts \setleading{\textleading}}
1283
\let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
1284
\let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
1285
\let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
1286
\let\tenttsl=\titlettsl
1287
\resetmathfonts \setleading{25pt}}
1288
\def\titlefont#1{{\titlefonts\rm #1}}
1290
\let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
1291
\let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
1292
\let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl
1293
\resetmathfonts \setleading{19pt}}
1295
\let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
1296
\let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
1297
\let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl
1298
\resetmathfonts \setleading{16pt}}
1300
\let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
1301
\let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
1302
\let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl
1303
\resetmathfonts \setleading{15pt}}
1304
\let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf?
1306
\let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
1307
\let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
1308
\let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
1309
\let\tenttsl=\smallttsl
1310
\resetmathfonts \setleading{10.5pt}}
1312
\let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl
1313
\let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
1314
\let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
1315
\let\tenttsl=\smallerttsl
1316
\resetmathfonts \setleading{9.5pt}}
1317
\let\smallexamplefonts = \smallerfonts
1319
% Set up the default fonts, so we can use them for creating boxes.
1323
% Define these so they can be easily changed for other fonts.
1324
\def\angleleft{$\langle$}
1325
\def\angleright{$\rangle$}
1327
% Count depth in font-changes, for error checks
1328
\newcount\fontdepth \fontdepth=0
1330
% Fonts for short table of contents.
1331
\setfont\shortcontrm\rmshape{12}{1000}
1332
\setfont\shortcontbf\bxshape{12}{1000}
1333
\setfont\shortcontsl\slshape{12}{1000}
1335
%% Add scribe-like font environments, plus @l for inline lisp (usually sans
1336
%% serif) and @ii for TeX italic
1338
% \smartitalic{ARG} outputs arg in italics, followed by an italic correction
1339
% unless the following character is such as not to need one.
1340
\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else\/\fi\fi\fi}
1341
\def\smartslanted#1{{\sl #1}\futurelet\next\smartitalicx}
1342
\def\smartitalic#1{{\it #1}\futurelet\next\smartitalicx}
1345
\let\var=\smartslanted
1346
\let\dfn=\smartslanted
1347
\let\emph=\smartitalic
1348
\let\cite=\smartslanted
1353
% We can't just use \exhyphenpenalty, because that only has effect at
1354
% the end of a paragraph. Restore normal hyphenation at the end of the
1355
% group within which \nohyphenation is presumably called.
1357
\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation}
1358
\def\restorehyphenation{\hyphenchar\font = `- }
1361
{\tt \rawbackslash \frenchspacing #1}%
1365
\def\samp#1{`\tclose{#1}'\null}
1366
\setfont\keyrm\rmshape{8}{1000}
1368
\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
1369
\raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
1370
\vbox{\hrule\kern-0.4pt
1371
\hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
1373
\kern-.06em\raise0.4pt\hbox{\angleright}}}}
1374
% The old definition, with no lozenge:
1375
%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
1376
\def\ctrl #1{{\tt \rawbackslash \hat}#1}
1378
% @file, @option are the same as @samp.
1382
% @code is a modification of @t,
1383
% which makes spaces the same size as normal in the surrounding text.
1386
% Change normal interword space to be same as for the current font.
1387
\spaceskip = \fontdimen2\font
1389
% Switch to typewriter.
1392
% But `\ ' produces the large typewriter interword space.
1393
\def\ {{\spaceskip = 0pt{} }}%
1395
% Turn off hyphenation.
1405
% We *must* turn on hyphenation at `-' and `_' in \code.
1406
% Otherwise, it is too hard to avoid overfull hboxes
1407
% in the Emacs manual, the Library manual, etc.
1409
% Unfortunately, TeX uses one parameter (\hyphenchar) to control
1410
% both hyphenation at - and hyphenation within words.
1411
% We must therefore turn them both off (\tclose does that)
1412
% and arrange explicitly to hyphenate at a dash.
1418
\global\def\code{\begingroup
1419
\catcode`\-=\active \let-\codedash
1420
\catcode`\_=\active \let_\codeunder
1424
% If we end up with any active - characters when handling the index,
1425
% just treat them as a normal -.
1426
\global\def\indexbreaks{\catcode`\-=\active \let-\realdash}
1430
\def\codedash{-\discretionary{}{}{}}
1431
\def\codeunder{\ifusingtt{\normalunderscore\discretionary{}{}{}}{\_}}
1432
\def\codex #1{\tclose{#1}\endgroup}
1434
%\let\exp=\tclose %Was temporary
1436
% @kbd is like @code, except that if the argument is just one @key command,
1437
% then @kbd has no effect.
1439
% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
1440
% `example' (@kbd uses ttsl only inside of @example and friends),
1441
% or `code' (@kbd uses normal tty font always).
1442
\def\kbdinputstyle{\parsearg\kbdinputstylexxx}
1443
\def\kbdinputstylexxx#1{%
1445
\ifx\arg\worddistinct
1446
\gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
1447
\else\ifx\arg\wordexample
1448
\gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
1449
\else\ifx\arg\wordcode
1450
\gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
1453
\def\worddistinct{distinct}
1454
\def\wordexample{example}
1457
% Default is kbdinputdistinct. (Too much of a hassle to call the macro,
1458
% the catcodes are wrong for parsearg to work.)
1459
\gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}
1462
\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
1463
\ifx\one\xkey\ifx\threex\three \key{#2}%
1464
\else{\tclose{\kbdfont\look}}\fi
1465
\else{\tclose{\kbdfont\look}}\fi}
1467
% For @url, @env, @command quotes seem unnecessary, so use \code.
1472
% @uref (abbreviation for `urlref') takes an optional (comma-separated)
1473
% second argument specifying the text to display and an optional third
1474
% arg as text to display instead of (rather than in addition to) the url
1475
% itself. First (mandatory) arg is the url. Perhaps eventually put in
1476
% a hypertex \special here.
1478
\def\uref#1{\douref #1,,,\finish}
1479
\def\douref#1,#2,#3,#4\finish{\begingroup
1482
\setbox0 = \hbox{\ignorespaces #3}%
1484
\unhbox0 % third arg given, show only that
1486
\setbox0 = \hbox{\ignorespaces #2}%
1489
\unhbox0 % PDF: 2nd arg given, show only it
1491
\unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url
1494
\code{#1}% only url given, so show it
1500
% rms does not like angle brackets --karl, 17may97.
1501
% So now @email is just like @uref, unless we are pdf.
1503
%\def\email#1{\angleleft{\tt #1}\angleright}
1505
\def\email#1{\doemail#1,,\finish}
1506
\def\doemail#1,#2,#3\finish{\begingroup
1509
\setbox0 = \hbox{\ignorespaces #2}%
1510
\ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
1517
% Check if we are currently using a typewriter font. Since all the
1518
% Computer Modern typewriter fonts have zero interword stretch (and
1519
% shrink), and it is reasonable to expect all typewriter fonts to have
1520
% this property, we can check that font parameter.
1522
\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
1524
% Typeset a dimension, e.g., `in' or `pt'. The only reason for the
1525
% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
1527
\def\dmn#1{\thinspace #1}
1529
\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
1531
% @l was never documented to mean ``switch to the Lisp font'',
1532
% and it is not used as such in any manual I can find. We need it for
1533
% Polish suppressed-l. --karl, 22sep96.
1534
%\def\l#1{{\li #1}\null}
1536
% Explicit font changes: @r, @sc, undocumented @ii.
1537
\def\r#1{{\rm #1}} % roman font
1538
\def\sc#1{{\smallcaps#1}} % smallcaps font
1539
\def\ii#1{{\it #1}} % italic font
1541
% @acronym downcases the argument and prints in smallcaps.
1542
\def\acronym#1{{\smallcaps \lowercase{#1}}}
1544
% @pounds{} is a sterling sign.
1545
\def\pounds{{\it\$}}
1548
\message{page headings,}
1550
\newskip\titlepagetopglue \titlepagetopglue = 1.5in
1551
\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
1553
% First the title page. Must do @settitle before @titlepage.
1555
\newif\iffinishedtitlepage
1557
% Do an implicit @contents or @shortcontents after @end titlepage if the
1558
% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage.
1560
\newif\ifsetcontentsaftertitlepage
1561
\let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
1562
\newif\ifsetshortcontentsaftertitlepage
1563
\let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
1565
\def\shorttitlepage{\parsearg\shorttitlepagezzz}
1566
\def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
1567
\endgroup\page\hbox{}\page}
1569
\def\titlepage{\begingroup \parindent=0pt \textfonts
1570
\let\subtitlerm=\tenrm
1571
\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}%
1573
\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines}%
1575
% Leave some space at the very top of the page.
1576
\vglue\titlepagetopglue
1578
% Now you can print the title using @title.
1579
\def\title{\parsearg\titlezzz}%
1580
\def\titlezzz##1{\leftline{\titlefonts\rm ##1}
1581
% print a rule at the page bottom also.
1582
\finishedtitlepagefalse
1583
\vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
1584
% No rule at page bottom unless we print one at the top with @title.
1585
\finishedtitlepagetrue
1587
% Now you can put text using @subtitle.
1588
\def\subtitle{\parsearg\subtitlezzz}%
1589
\def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}%
1591
% @author should come last, but may come many times.
1592
\def\author{\parsearg\authorzzz}%
1593
\def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi
1594
{\authorfont \leftline{##1}}}%
1596
% Most title ``pages'' are actually two pages long, with space
1597
% at the top of the second. We don't want the ragged left on the second.
1598
\let\oldpage = \page
1600
\iffinishedtitlepage\else
1604
\let\page = \oldpage
1606
% \def\page{\oldpage \hbox{}}
1610
\iffinishedtitlepage\else
1613
% It is important to do the page break before ending the group,
1614
% because the headline and footline are only empty inside the group.
1615
% If we use the new definition of \page, we always get a blank page
1616
% after the title page, which we certainly don't want.
1620
% Need this before the \...aftertitlepage checks so that if they are
1621
% in effect the toc pages will come out with page numbers.
1624
% If they want short, they certainly want long too.
1625
\ifsetshortcontentsaftertitlepage
1628
\global\let\shortcontents = \relax
1629
\global\let\contents = \relax
1632
\ifsetcontentsaftertitlepage
1634
\global\let\contents = \relax
1635
\global\let\shortcontents = \relax
1638
\ifpdf \pdfmakepagedesttrue \fi
1641
\def\finishtitlepage{%
1642
\vskip4pt \hrule height 2pt width \hsize
1643
\vskip\titlepagebottomglue
1644
\finishedtitlepagetrue
1647
%%% Set up page headings and footings.
1649
\let\thispage=\folio
1651
\newtoks\evenheadline % headline on even pages
1652
\newtoks\oddheadline % headline on odd pages
1653
\newtoks\evenfootline % footline on even pages
1654
\newtoks\oddfootline % footline on odd pages
1656
% Now make Tex use those variables
1657
\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
1658
\else \the\evenheadline \fi}}
1659
\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
1660
\else \the\evenfootline \fi}\HEADINGShook}
1661
\let\HEADINGShook=\relax
1663
% Commands to set those variables.
1664
% For example, this is what @headings on does
1665
% @evenheading @thistitle|@thispage|@thischapter
1666
% @oddheading @thischapter|@thispage|@thistitle
1667
% @evenfooting @thisfile||
1668
% @oddfooting ||@thisfile
1670
\def\evenheading{\parsearg\evenheadingxxx}
1671
\def\oddheading{\parsearg\oddheadingxxx}
1672
\def\everyheading{\parsearg\everyheadingxxx}
1674
\def\evenfooting{\parsearg\evenfootingxxx}
1675
\def\oddfooting{\parsearg\oddfootingxxx}
1676
\def\everyfooting{\parsearg\everyfootingxxx}
1680
\gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish}
1681
\gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{%
1682
\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1684
\gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish}
1685
\gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{%
1686
\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1688
\gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
1690
\gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish}
1691
\gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{%
1692
\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1694
\gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish}
1695
\gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{%
1696
\global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
1698
% Leave some space for the footline. Hopefully ok to assume
1699
% @evenfooting will not be used by itself.
1700
\global\advance\pageheight by -\baselineskip
1701
\global\advance\vsize by -\baselineskip
1704
\gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}}
1706
}% unbind the catcode of @.
1708
% @headings double turns headings on for double-sided printing.
1709
% @headings single turns headings on for single-sided printing.
1710
% @headings off turns them off.
1711
% @headings on same as @headings double, retained for compatibility.
1712
% @headings after turns on double-sided headings after this page.
1713
% @headings doubleafter turns on double-sided headings after this page.
1714
% @headings singleafter turns on single-sided headings after this page.
1715
% By default, they are off at the start of a document,
1716
% and turned `on' after @end titlepage.
1718
\def\headings #1 {\csname HEADINGS#1\endcsname}
1721
\global\evenheadline={\hfil} \global\evenfootline={\hfil}
1722
\global\oddheadline={\hfil} \global\oddfootline={\hfil}}
1724
% When we turn headings on, set the page number to 1.
1725
% For double-sided printing, put current file name in lower left corner,
1726
% chapter name on inside top of right hand pages, document
1727
% title on inside top of left hand pages, and page numbers on outside top
1728
% edge of all pages.
1729
\def\HEADINGSdouble{
1731
\global\evenfootline={\hfil}
1732
\global\oddfootline={\hfil}
1733
\global\evenheadline={\line{\folio\hfil\thistitle}}
1734
\global\oddheadline={\line{\thischapter\hfil\folio}}
1735
\global\let\contentsalignmacro = \chapoddpage
1737
\let\contentsalignmacro = \chappager
1739
% For single-sided printing, chapter title goes across top left of page,
1740
% page number on top right.
1741
\def\HEADINGSsingle{
1743
\global\evenfootline={\hfil}
1744
\global\oddfootline={\hfil}
1745
\global\evenheadline={\line{\thischapter\hfil\folio}}
1746
\global\oddheadline={\line{\thischapter\hfil\folio}}
1747
\global\let\contentsalignmacro = \chappager
1749
\def\HEADINGSon{\HEADINGSdouble}
1751
\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
1752
\let\HEADINGSdoubleafter=\HEADINGSafter
1753
\def\HEADINGSdoublex{%
1754
\global\evenfootline={\hfil}
1755
\global\oddfootline={\hfil}
1756
\global\evenheadline={\line{\folio\hfil\thistitle}}
1757
\global\oddheadline={\line{\thischapter\hfil\folio}}
1758
\global\let\contentsalignmacro = \chapoddpage
1761
\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
1762
\def\HEADINGSsinglex{%
1763
\global\evenfootline={\hfil}
1764
\global\oddfootline={\hfil}
1765
\global\evenheadline={\line{\thischapter\hfil\folio}}
1766
\global\oddheadline={\line{\thischapter\hfil\folio}}
1767
\global\let\contentsalignmacro = \chappager
1770
% Subroutines used in generating headings
1771
% This produces Day Month Year style of output.
1772
% Only define if not already defined, in case a txi-??.tex file has set
1773
% up a different format (e.g., txi-cs.tex does this).
1774
\ifx\today\undefined
1778
\or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
1779
\or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
1780
\or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
1785
% @settitle line... specifies the title of the document, for headings.
1786
% It generates no output of its own.
1787
\def\thistitle{\putwordNoTitle}
1788
\def\settitle{\parsearg\settitlezzz}
1789
\def\settitlezzz #1{\gdef\thistitle{#1}}
1793
% Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x).
1795
% default indentation of table text
1796
\newdimen\tableindent \tableindent=.8in
1797
% default indentation of @itemize and @enumerate text
1798
\newdimen\itemindent \itemindent=.3in
1799
% margin between end of table item and start of table text.
1800
\newdimen\itemmargin \itemmargin=.1in
1802
% used internally for \itemindent minus \itemmargin
1805
% Note @table, @vtable, and @vtable define @item, @itemx, etc., with
1807
% They also define \itemindex
1808
% to index the item name in whatever manner is desired (perhaps none).
1810
\newif\ifitemxneedsnegativevskip
1812
\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
1814
\def\internalBitem{\smallbreak \parsearg\itemzzz}
1815
\def\internalBitemx{\itemxpar \parsearg\itemzzz}
1817
\def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz}
1818
\def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \itemxpar \parsearg\xitemzzz}
1820
\def\internalBkitem{\smallbreak \parsearg\kitemzzz}
1821
\def\internalBkitemx{\itemxpar \parsearg\kitemzzz}
1823
\def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}%
1826
\def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}%
1829
\def\itemzzz #1{\begingroup %
1830
\advance\hsize by -\rightskip
1831
\advance\hsize by -\tableindent
1832
\setbox0=\hbox{\itemfont{#1}}%
1834
\nobreak % This prevents a break before @itemx.
1836
% If the item text does not fit in the space we have, put it on a line
1837
% by itself, and do not allow a page break either before or after that
1838
% line. We do not start a paragraph here because then if the next
1839
% command is, e.g., @kindex, the whatsit would get put into the
1840
% horizontal list on a line by itself, resulting in extra blank space.
1841
\ifdim \wd0>\itemmax
1843
% Make this a paragraph so we get the \parskip glue and wrapping,
1844
% but leave it ragged-right.
1846
\advance\leftskip by-\tableindent
1847
\advance\hsize by\tableindent
1848
\advance\rightskip by0pt plus1fil
1849
\leavevmode\unhbox0\par
1852
% We're going to be starting a paragraph, but we don't want the
1853
% \parskip glue -- logically it's part of the @item we just started.
1854
\nobreak \vskip-\parskip
1856
% Stop a page break at the \parskip glue coming up. Unfortunately
1857
% we can't prevent a possible page break at the following
1858
% \baselineskip glue.
1861
\itemxneedsnegativevskipfalse
1863
% The item text fits into the space. Start a paragraph, so that the
1864
% following text (if any) will end up on the same line.
1866
% Do this with kerns and \unhbox so that if there is a footnote in
1867
% the item text, it can migrate to the main vertical list and
1868
% eventually be printed.
1869
\nobreak\kern-\tableindent
1870
\dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
1872
\nobreak\kern\dimen0
1874
\itemxneedsnegativevskiptrue
1878
\def\item{\errmessage{@item while not in a table}}
1879
\def\itemx{\errmessage{@itemx while not in a table}}
1880
\def\kitem{\errmessage{@kitem while not in a table}}
1881
\def\kitemx{\errmessage{@kitemx while not in a table}}
1882
\def\xitem{\errmessage{@xitem while not in a table}}
1883
\def\xitemx{\errmessage{@xitemx while not in a table}}
1885
% Contains a kludge to get @end[description] to work.
1886
\def\description{\tablez{\dontindex}{1}{}{}{}{}}
1888
% @table, @ftable, @vtable.
1889
\def\table{\begingroup\inENV\obeylines\obeyspaces\tablex}
1890
{\obeylines\obeyspaces%
1891
\gdef\tablex #1^^M{%
1892
\tabley\dontindex#1 \endtabley}}
1894
\def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex}
1895
{\obeylines\obeyspaces%
1896
\gdef\ftablex #1^^M{%
1897
\tabley\fnitemindex#1 \endtabley
1898
\def\Eftable{\endgraf\afterenvbreak\endgroup}%
1899
\let\Etable=\relax}}
1901
\def\vtable{\begingroup\inENV\obeylines\obeyspaces\vtablex}
1902
{\obeylines\obeyspaces%
1903
\gdef\vtablex #1^^M{%
1904
\tabley\vritemindex#1 \endtabley
1905
\def\Evtable{\endgraf\afterenvbreak\endgroup}%
1906
\let\Etable=\relax}}
1909
\def\fnitemindex #1{\doind {fn}{\code{#1}}}%
1910
\def\vritemindex #1{\doind {vr}{\code{#1}}}%
1913
\gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup%
1914
\tablez{#1}{#2}{#3}{#4}{#5}{#6}}}
1916
\def\tablez #1#2#3#4#5#6{%
1919
\def\Edescription{\Etable}% Necessary kludge.
1921
\ifnum 0#3>0 \advance \leftskip by #3\mil \fi %
1922
\ifnum 0#4>0 \tableindent=#4\mil \fi %
1923
\ifnum 0#5>0 \advance \rightskip by #5\mil \fi %
1925
\itemmax=\tableindent %
1926
\advance \itemmax by -\itemmargin %
1927
\advance \leftskip by \tableindent %
1928
\exdentamount=\tableindent
1930
\parskip = \smallskipamount
1931
\ifdim \parskip=0pt \parskip=2pt \fi%
1932
\def\Etable{\endgraf\afterenvbreak\endgroup}%
1933
\let\item = \internalBitem %
1934
\let\itemx = \internalBitemx %
1935
\let\kitem = \internalBkitem %
1936
\let\kitemx = \internalBkitemx %
1937
\let\xitem = \internalBxitem %
1938
\let\xitemx = \internalBxitemx %
1941
% This is the counter used by @enumerate, which is really @itemize
1945
\def\itemize{\parsearg\itemizezzz}
1947
\def\itemizezzz #1{%
1948
\begingroup % ended by the @end itemize
1949
\itemizey {#1}{\Eitemize}
1952
\def\itemizey #1#2{%
1954
\itemmax=\itemindent %
1955
\advance \itemmax by -\itemmargin %
1956
\advance \leftskip by \itemindent %
1957
\exdentamount=\itemindent
1959
\parskip = \smallskipamount %
1960
\ifdim \parskip=0pt \parskip=2pt \fi%
1961
\def#2{\endgraf\afterenvbreak\endgroup}%
1962
\def\itemcontents{#1}%
1963
\let\item=\itemizeitem}
1965
% Set sfcode to normal for the chars that usually have another value.
1966
% These are `.?!:;,'
1967
\def\frenchspacing{\sfcode46=1000 \sfcode63=1000 \sfcode33=1000
1968
\sfcode58=1000 \sfcode59=1000 \sfcode44=1000 }
1970
% \splitoff TOKENS\endmark defines \first to be the first token in
1971
% TOKENS, and \rest to be the remainder.
1973
\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
1975
% Allow an optional argument of an uppercase letter, lowercase letter,
1976
% or number, to specify the first label in the enumerated list. No
1977
% argument is the same as `1'.
1979
\def\enumerate{\parsearg\enumeratezzz}
1980
\def\enumeratezzz #1{\enumeratey #1 \endenumeratey}
1981
\def\enumeratey #1 #2\endenumeratey{%
1982
\begingroup % ended by the @end enumerate
1984
% If we were given no argument, pretend we were given `1'.
1986
\ifx\thearg\empty \def\thearg{1}\fi
1988
% Detect if the argument is a single token. If so, it might be a
1989
% letter. Otherwise, the only valid thing it can be is a number.
1990
% (We will always have one token, because of the test we just made.
1991
% This is a good thing, since \splitoff doesn't work given nothing at
1992
% all -- the first parameter is undelimited.)
1993
\expandafter\splitoff\thearg\endmark
1995
% Only one token in the argument. It could still be anything.
1996
% A ``lowercase letter'' is one whose \lccode is nonzero.
1997
% An ``uppercase letter'' is one whose \lccode is both nonzero, and
1998
% not equal to itself.
1999
% Otherwise, we assume it's a number.
2001
% We need the \relax at the end of the \ifnum lines to stop TeX from
2002
% continuing to look for a <number>.
2004
\ifnum\lccode\expandafter`\thearg=0\relax
2005
\numericenumerate % a number (we hope)
2008
\ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
2009
\lowercaseenumerate % lowercase letter
2011
\uppercaseenumerate % uppercase letter
2015
% Multiple tokens in the argument. We hope it's a number.
2020
% An @enumerate whose labels are integers. The starting integer is
2023
\def\numericenumerate{%
2025
\startenumeration{\the\itemno}%
2028
% The starting (lowercase) letter is in \thearg.
2029
\def\lowercaseenumerate{%
2030
\itemno = \expandafter`\thearg
2032
% Be sure we're not beyond the end of the alphabet.
2034
\errmessage{No more lowercase letters in @enumerate; get a bigger
2041
% The starting (uppercase) letter is in \thearg.
2042
\def\uppercaseenumerate{%
2043
\itemno = \expandafter`\thearg
2045
% Be sure we're not beyond the end of the alphabet.
2047
\errmessage{No more uppercase letters in @enumerate; get a bigger
2054
% Call itemizey, adding a period to the first argument and supplying the
2055
% common last two arguments. Also subtract one from the initial value in
2056
% \itemno, since @item increments \itemno.
2058
\def\startenumeration#1{%
2059
\advance\itemno by -1
2060
\itemizey{#1.}\Eenumerate\flushcr
2063
% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
2066
\def\alphaenumerate{\enumerate{a}}
2067
\def\capsenumerate{\enumerate{A}}
2068
\def\Ealphaenumerate{\Eenumerate}
2069
\def\Ecapsenumerate{\Eenumerate}
2071
% Definition of @item while inside @itemize.
2074
\advance\itemno by 1
2075
{\let\par=\endgraf \smallbreak}%
2076
\ifhmode \errmessage{In hmode at itemizeitem}\fi
2077
{\parskip=0in \hskip 0pt
2078
\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}%
2079
\vadjust{\penalty 1200}}%
2082
% @multitable macros
2083
% Amy Hendrickson, 8/18/94, 3/6/96
2085
% @multitable ... @end multitable will make as many columns as desired.
2086
% Contents of each column will wrap at width given in preamble. Width
2087
% can be specified either with sample text given in a template line,
2088
% or in percent of \hsize, the current width of text on page.
2090
% Table can continue over pages but will only break between lines.
2094
% Either define widths of columns in terms of percent of \hsize:
2095
% @multitable @columnfractions .25 .3 .45
2098
% Numbers following @columnfractions are the percent of the total
2099
% current hsize to be used for each column. You may use as many
2100
% columns as desired.
2103
% Or use a template:
2104
% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
2106
% using the widest term desired in each column.
2108
% For those who want to use more than one line's worth of words in
2109
% the preamble, break the line within one argument and it
2110
% will parse correctly, i.e.,
2112
% @multitable {Column 1 template} {Column 2 template} {Column 3
2115
% @multitable {Column 1 template} {Column 2 template}
2116
% {Column 3 template}
2118
% Each new table line starts with @item, each subsequent new column
2119
% starts with @tab. Empty columns may be produced by supplying @tab's
2120
% with nothing between them for as many times as empty columns are needed,
2121
% ie, @tab@tab@tab will produce two empty columns.
2123
% @item, @tab, @multitable or @end multitable do not need to be on their
2124
% own lines, but it will not hurt if they are.
2126
% Sample multitable:
2128
% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
2129
% @item first col stuff @tab second col stuff @tab third col
2136
% @item first col stuff @tab second col stuff
2137
% @tab Many paragraphs of text may be used in any column.
2139
% They will wrap at the width determined by the template.
2140
% @item@tab@tab This will be in third column.
2143
% Default dimensions may be reset by user.
2144
% @multitableparskip is vertical space between paragraphs in table.
2145
% @multitableparindent is paragraph indent in table.
2146
% @multitablecolmargin is horizontal space to be left between columns.
2147
% @multitablelinespace is space to leave between table items, baseline
2149
% 0pt means it depends on current normal line spacing.
2151
\newskip\multitableparskip
2152
\newskip\multitableparindent
2153
\newdimen\multitablecolspace
2154
\newskip\multitablelinespace
2155
\multitableparskip=0pt
2156
\multitableparindent=6pt
2157
\multitablecolspace=12pt
2158
\multitablelinespace=0pt
2160
% Macros used to set up halign preamble:
2162
\let\endsetuptable\relax
2163
\def\xendsetuptable{\endsetuptable}
2164
\let\columnfractions\relax
2165
\def\xcolumnfractions{\columnfractions}
2168
% #1 is the part of the @columnfraction before the decimal point, which
2169
% is presumably either 0 or the empty string (but we don't check, we
2170
% just throw it away). #2 is the decimal part, which we use as the
2171
% percent of \hsize for this column.
2172
\def\pickupwholefraction#1.#2 {%
2173
\global\advance\colcount by 1
2174
\expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}%
2181
\ifx\firstarg\xendsetuptable
2184
\ifx\firstarg\xcolumnfractions
2185
\global\setpercenttrue
2188
\let\go\pickupwholefraction
2190
\global\advance\colcount by 1
2191
\setbox0=\hbox{#1\unskip }% Add a normal word space as a separator;
2192
% typically that is always in the input, anyway.
2193
\expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
2196
\ifx\go\pickupwholefraction
2197
% Put the argument back for the \pickupwholefraction call, so
2198
% we'll always have a period there to be parsed.
2199
\def\go{\pickupwholefraction#1}%
2201
\let\go = \setuptable
2207
% This used to have \hskip1sp. But then the space in a template line is
2208
% not enough. That is bad. So let's go back to just & until we
2209
% encounter the problem it was intended to solve again.
2210
% --karl, nathan@acm.org, 20apr99.
2213
% @multitable ... @end multitable definitions:
2215
\def\multitable{\parsearg\dotable}
2216
\def\dotable#1{\bgroup
2221
\setmultitablespacing
2222
\parskip=\multitableparskip
2223
\parindent=\multitableparindent
2226
\def\Emultitable{\global\setpercentfalse\cr\egroup\egroup}%
2228
% To parse everything between @multitable and @item:
2229
\setuptable#1 \endsetuptable
2231
% \everycr will reset column counter, \colcount, at the end of
2232
% each line. Every column entry will cause \colcount to advance by one.
2233
% The table preamble
2234
% looks at the current \colcount to find the correct column width.
2237
% \filbreak%% keeps underfull box messages off when table breaks over pages.
2238
% Maybe so, but it also creates really weird page breaks when the table
2239
% breaks over pages. Wouldn't \vfil be better? Wait until the problem
2240
% manifests itself, so it can be fixed for real --karl.
2241
\global\colcount=0\relax}}%
2243
% This preamble sets up a generic column definition, which will
2244
% be used as many times as user calls for columns.
2245
% \vtop will set a single line and will also let text wrap and
2246
% continue for many paragraphs if desired.
2247
\halign\bgroup&\global\advance\colcount by 1\relax
2248
\multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
2250
% In order to keep entries from bumping into each other
2251
% we will add a \leftskip of \multitablecolspace to all columns after
2254
% If a template has been used, we will add \multitablecolspace
2255
% to the width of each template entry.
2257
% If the user has set preamble in terms of percent of \hsize we will
2258
% use that dimension as the width of the column, and the \leftskip
2259
% will keep entries from bumping into each other. Table will start at
2260
% left margin and final column will justify at right margin.
2262
% Make sure we don't inherit \rightskip from the outer environment.
2265
% The first column will be indented with the surrounding text.
2266
\advance\hsize by\leftskip
2269
% If user has not set preamble in terms of percent of \hsize
2270
% we will advance \hsize by \multitablecolspace.
2271
\advance\hsize by \multitablecolspace
2273
% In either case we will make \leftskip=\multitablecolspace:
2274
\leftskip=\multitablecolspace
2276
% Ignoring space at the beginning and end avoids an occasional spurious
2277
% blank line, when TeX decides to break the line at the space before the
2278
% box from the multistrut, so the strut ends up on a line by itself.
2280
% @multitable @columnfractions .11 .89
2282
% @tab Legal holiday which is valid in major parts of the whole country.
2283
% Is automatically provided with highlighting sequences respectively marking
2285
\noindent\ignorespaces##\unskip\multistrut}\cr
2288
\def\setmultitablespacing{% test to see if user has set \multitablelinespace.
2289
% If so, do nothing. If not, give it an appropriate dimension based on
2290
% current baselineskip.
2291
\ifdim\multitablelinespace=0pt
2292
\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
2293
\global\advance\multitablelinespace by-\ht0
2294
%% strut to put in table in case some entry doesn't have descenders,
2295
%% to keep lines equally spaced
2296
\let\multistrut = \strut
2298
%% FIXME: what is \box0 supposed to be?
2299
\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
2301
%% Test to see if parskip is larger than space between lines of
2302
%% table. If not, do nothing.
2303
%% If so, set to same dimension as multitablelinespace.
2304
\ifdim\multitableparskip>\multitablelinespace
2305
\global\multitableparskip=\multitablelinespace
2306
\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
2307
%% than skip between lines in the table.
2309
\ifdim\multitableparskip=0pt
2310
\global\multitableparskip=\multitablelinespace
2311
\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
2312
%% than skip between lines in the table.
2316
\message{conditionals,}
2317
% Prevent errors for section commands.
2318
% Used in @ignore and in failing conditionals.
2319
\def\ignoresections{%
2321
\let\unnumbered=\relax
2323
\let\unnumberedsec=\relax
2324
\let\unnumberedsection=\relax
2325
\let\unnumberedsubsec=\relax
2326
\let\unnumberedsubsection=\relax
2327
\let\unnumberedsubsubsec=\relax
2328
\let\unnumberedsubsubsection=\relax
2331
\let\subsubsec=\relax
2332
\let\subsection=\relax
2333
\let\subsubsection=\relax
2334
\let\appendix=\relax
2335
\let\appendixsec=\relax
2336
\let\appendixsection=\relax
2337
\let\appendixsubsec=\relax
2338
\let\appendixsubsection=\relax
2339
\let\appendixsubsubsec=\relax
2340
\let\appendixsubsubsection=\relax
2341
\let\contents=\relax
2342
\let\smallbook=\relax
2343
\let\titlepage=\relax
2346
% Used in nested conditionals, where we have to parse the Texinfo source
2347
% and so want to turn off most commands, in case they are used
2350
\def\ignoremorecommands{%
2351
\let\defcodeindex = \relax
2354
\let\deffnx = \relax
2355
\let\defindex = \relax
2356
\let\defivar = \relax
2357
\let\defmac = \relax
2358
\let\defmethod = \relax
2360
\let\defopt = \relax
2361
\let\defspec = \relax
2363
\let\deftypefn = \relax
2364
\let\deftypefun = \relax
2365
\let\deftypeivar = \relax
2366
\let\deftypeop = \relax
2367
\let\deftypevar = \relax
2368
\let\deftypevr = \relax
2370
\let\defvar = \relax
2374
\let\printindex = \relax
2376
\let\settitle = \relax
2377
\let\setchapternewpage = \relax
2378
\let\setchapterstyle = \relax
2379
\let\everyheading = \relax
2380
\let\evenheading = \relax
2381
\let\oddheading = \relax
2382
\let\everyfooting = \relax
2383
\let\evenfooting = \relax
2384
\let\oddfooting = \relax
2385
\let\headings = \relax
2386
\let\include = \relax
2387
\let\lowersections = \relax
2389
\let\raisesections = \relax
2396
% Ignore @ignore ... @end ignore.
2398
\def\ignore{\doignore{ignore}}
2400
% Also ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu,
2401
% @documentdescription, and @direntry text.
2403
\def\ifinfo{\doignore{ifinfo}}
2404
\def\ifhtml{\doignore{ifhtml}}
2405
\def\ifnottex{\doignore{ifnottex}}
2406
\def\html{\doignore{html}}
2407
\def\menu{\doignore{menu}}
2408
\def\documentdescription{\doignore{documentdescription}}
2409
\def\direntry{\doignore{direntry}}
2411
% @dircategory CATEGORY -- specify a category of the dir file
2412
% which this file should belong to. Ignore this in TeX.
2413
\let\dircategory = \comment
2415
% Ignore text until a line `@end #1'.
2417
\def\doignore#1{\begingroup
2418
% Don't complain about control sequences we have declared \outer.
2421
% Define a command to swallow text until we reach `@end #1'.
2422
% This @ is a catcode 12 token (that is the normal catcode of @ in
2423
% this texinfo.tex file). We change the catcode of @ below to match.
2424
\long\def\doignoretext##1@end #1{\enddoignore}%
2426
% Make sure that spaces turn into tokens that match what \doignoretext wants.
2429
% Ignore braces, too, so mismatched braces don't cause trouble.
2433
% We must not have @c interpreted as a control sequence.
2436
% Make the letter c a comment character so that the rest of the line
2437
% will be ignored. This way, the document can have (for example)
2439
% and the @end ifinfo will be properly ignored.
2440
% (We've just changed @ to catcode 12.)
2443
% And now expand that command.
2447
% What we do to finish off ignored text.
2449
\def\enddoignore{\endgroup\ignorespaces}%
2451
\newif\ifwarnedobs\warnedobsfalse
2453
\ifwarnedobs\relax\else
2454
% We need to warn folks that they may have trouble with TeX 3.0.
2455
% This uses \immediate\write16 rather than \message to get newlines.
2456
\immediate\write16{}
2457
\immediate\write16{WARNING: for users of Unix TeX 3.0!}
2458
\immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).}
2459
\immediate\write16{If you are running another version of TeX, relax.}
2460
\immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.}
2461
\immediate\write16{ Then upgrade your TeX installation if you can.}
2462
\immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)}
2463
\immediate\write16{If you are stuck with version 3.0, run the}
2464
\immediate\write16{ script ``tex3patch'' from the Texinfo distribution}
2465
\immediate\write16{ to use a workaround.}
2466
\immediate\write16{}
2467
\global\warnedobstrue
2471
% **In TeX 3.0, setting text in \nullfont hangs tex. For a
2472
% workaround (which requires the file ``dummy.tfm'' to be installed),
2473
% uncomment the following line:
2474
%%%%%\font\nullfont=dummy\let\obstexwarn=\relax
2476
% Ignore text, except that we keep track of conditional commands for
2477
% purposes of nesting, up to an `@end #1' command.
2479
\def\nestedignore#1{%
2481
% We must actually expand the ignored text to look for the @end
2482
% command, so that nested ignore constructs work. Thus, we put the
2483
% text into a \vbox and then do nothing with the result. To minimize
2484
% the change of memory overflow, we follow the approach outlined on
2485
% page 401 of the TeXbook: make the current font be a dummy font.
2487
\setbox0 = \vbox\bgroup
2488
% Don't complain about control sequences we have declared \outer.
2491
% Define `@end #1' to end the box, which will in turn undefine the
2492
% @end command again.
2493
\expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}%
2495
% We are going to be parsing Texinfo commands. Most cause no
2496
% trouble when they are used incorrectly, but some commands do
2497
% complicated argument parsing or otherwise get confused, so we
2500
% We can't do anything about stray @-signs, unfortunately;
2501
% they'll produce `undefined control sequence' errors.
2504
% Set the current font to be \nullfont, a TeX primitive, and define
2505
% all the font commands to also use \nullfont. We don't use
2506
% dummy.tfm, as suggested in the TeXbook, because not all sites
2507
% might have that installed. Therefore, math mode will still
2508
% produce output, but that should be an extremely small amount of
2509
% stuff compared to the main input.
2512
\let\tenrm=\nullfont \let\tenit=\nullfont \let\tensl=\nullfont
2513
\let\tenbf=\nullfont \let\tentt=\nullfont \let\smallcaps=\nullfont
2514
\let\tensf=\nullfont
2515
% Similarly for index fonts.
2516
\let\smallrm=\nullfont \let\smallit=\nullfont \let\smallsl=\nullfont
2517
\let\smallbf=\nullfont \let\smalltt=\nullfont \let\smallsc=\nullfont
2518
\let\smallsf=\nullfont
2519
% Similarly for smallexample fonts.
2520
\let\smallerrm=\nullfont \let\smallerit=\nullfont \let\smallersl=\nullfont
2521
\let\smallerbf=\nullfont \let\smallertt=\nullfont \let\smallersc=\nullfont
2522
\let\smallersf=\nullfont
2524
% Don't complain when characters are missing from the fonts.
2525
\tracinglostchars = 0
2527
% Don't bother to do space factor calculations.
2530
% Don't report underfull hboxes.
2533
% Do minimal line-breaking.
2534
\pretolerance = 10000
2536
% Do not execute instructions in @tex
2537
\def\tex{\doignore{tex}}%
2538
% Do not execute macro definitions.
2539
% `c' is a comment character, so the word `macro' will get cut off.
2540
\def\macro{\doignore{ma}}%
2543
% @set VAR sets the variable VAR to an empty value.
2544
% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
2546
% Since we want to separate VAR from REST-OF-LINE (which might be
2547
% empty), we can't just use \parsearg; we have to insert a space of our
2548
% own to delimit the rest of the line, and then take it out again if we
2549
% didn't need it. Make sure the catcode of space is correct to avoid
2550
% losing inside @example, for instance.
2552
\def\set{\begingroup\catcode` =10
2553
\catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
2555
\def\setxxx#1{\setyyy#1 \endsetyyy}
2556
\def\setyyy#1 #2\endsetyyy{%
2558
\ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
2559
\else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
2563
% Can't use \xdef to pre-expand #2 and save some time, since \temp or
2564
% \next or other control sequences that we've defined might get us into
2565
% an infinite loop. Consider `@set foo @cite{bar}'.
2566
\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
2568
% @clear VAR clears (i.e., unsets) the variable VAR.
2570
\def\clear{\parsearg\clearxxx}
2571
\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
2573
% @value{foo} gets the text saved in variable foo.
2575
\catcode`\_ = \active
2577
% We might end up with active _ or - characters in the argument if
2578
% we're called from @code, as @code{@value{foo-bar_}}. So \let any
2579
% such active characters to their normal equivalents.
2580
\gdef\value{\begingroup
2581
\catcode`\-=12 \catcode`\_=12
2582
\indexbreaks \let_\normalunderscore
2585
\def\valuexxx#1{\expandablevalue{#1}\endgroup}
2587
% We have this subroutine so that we can handle at least some @value's
2588
% properly in indexes (we \let\value to this in \indexdummies). Ones
2589
% whose names contain - or _ still won't work, but we can't do anything
2590
% about that. The command has to be fully expandable, since the result
2591
% winds up in the index file. This means that if the variable's value
2592
% contains other Texinfo commands, it's almost certain it will fail
2593
% (although perhaps we could fix that with sufficient work to do a
2594
% one-level expansion on the result, instead of complete).
2596
\def\expandablevalue#1{%
2597
\expandafter\ifx\csname SET#1\endcsname\relax
2598
{[No value for ``#1'']}%
2600
\csname SET#1\endcsname
2604
% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
2607
\def\ifset{\parsearg\ifsetxxx}
2609
\expandafter\ifx\csname SET#1\endcsname\relax
2610
\expandafter\ifsetfail
2612
\expandafter\ifsetsucceed
2615
\def\ifsetsucceed{\conditionalsucceed{ifset}}
2616
\def\ifsetfail{\nestedignore{ifset}}
2617
\defineunmatchedend{ifset}
2619
% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
2620
% defined with @set, or has been undefined with @clear.
2622
\def\ifclear{\parsearg\ifclearxxx}
2623
\def\ifclearxxx #1{%
2624
\expandafter\ifx\csname SET#1\endcsname\relax
2625
\expandafter\ifclearsucceed
2627
\expandafter\ifclearfail
2630
\def\ifclearsucceed{\conditionalsucceed{ifclear}}
2631
\def\ifclearfail{\nestedignore{ifclear}}
2632
\defineunmatchedend{ifclear}
2634
% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text
2635
% following, through the first @end iftex (etc.). Make `@end iftex'
2636
% (etc.) valid only after an @iftex.
2638
\def\iftex{\conditionalsucceed{iftex}}
2639
\def\ifnothtml{\conditionalsucceed{ifnothtml}}
2640
\def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
2641
\defineunmatchedend{iftex}
2642
\defineunmatchedend{ifnothtml}
2643
\defineunmatchedend{ifnotinfo}
2645
% We can't just want to start a group at @iftex (for example) and end it
2646
% at @end iftex, since then @set commands inside the conditional have no
2647
% effect (they'd get reverted at the end of the group). So we must
2648
% define \Eiftex to redefine itself to be its previous value. (We can't
2649
% just define it to fail again with an ``unmatched end'' error, since
2650
% the @ifset might be nested.)
2652
\def\conditionalsucceed#1{%
2654
% Remember the current value of \E#1.
2655
\let\nece{prevE#1} = \nece{E#1}%
2657
% At the `@end #1', redefine \E#1 to be its previous value.
2658
\def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}%
2663
% We need to expand lots of \csname's, but we don't want to expand the
2664
% control sequences after we've constructed them.
2666
\def\nece#1{\expandafter\noexpand\csname#1\endcsname}
2668
% @defininfoenclose.
2669
\let\definfoenclose=\comment
2673
% Index generation facilities
2675
% Define \newwrite to be identical to plain tex's \newwrite
2676
% except not \outer, so it can be used within \newindex.
2678
\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}}
2680
% \newindex {foo} defines an index named foo.
2681
% It automatically defines \fooindex such that
2682
% \fooindex ...rest of line... puts an entry in the index foo.
2683
% It also defines \fooindfile to be the number of the output channel for
2684
% the file that accumulates this index. The file's extension is foo.
2685
% The name of an index should be no more than 2 characters long
2686
% for the sake of vms.
2690
\expandafter\newwrite \csname#1indfile\endcsname
2691
\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
2693
\expandafter\xdef\csname#1index\endcsname{% % Define @#1index
2694
\noexpand\doindex{#1}}
2697
% @defindex foo == \newindex{foo}
2699
\def\defindex{\parsearg\newindex}
2701
% Define @defcodeindex, like @defindex except put all entries in @code.
2703
\def\defcodeindex{\parsearg\newcodeindex}
2705
\def\newcodeindex#1{%
2707
\expandafter\newwrite \csname#1indfile\endcsname
2708
\openout \csname#1indfile\endcsname \jobname.#1
2710
\expandafter\xdef\csname#1index\endcsname{%
2711
\noexpand\docodeindex{#1}}%
2715
% @synindex foo bar makes index foo feed into index bar.
2716
% Do this instead of @defindex foo if you don't want it as a separate index.
2718
% @syncodeindex foo bar similar, but put all entries made for index foo
2721
\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
2722
\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
2724
% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
2725
% #3 the target index (bar).
2726
\def\dosynindex#1#2#3{%
2727
% Only do \closeout if we haven't already done it, else we'll end up
2728
% closing the target index.
2729
\expandafter \ifx\csname donesynindex#2\endcsname \undefined
2730
% The \closeout helps reduce unnecessary open files; the limit on the
2731
% Acorn RISC OS is a mere 16 files.
2732
\expandafter\closeout\csname#2indfile\endcsname
2733
\expandafter\let\csname\donesynindex#2\endcsname = 1
2735
% redefine \fooindfile:
2736
\expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
2737
\expandafter\let\csname#2indfile\endcsname=\temp
2738
% redefine \fooindex:
2739
\expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
2742
% Define \doindex, the driver for all \fooindex macros.
2743
% Argument #1 is generated by the calling \fooindex macro,
2744
% and it is "foo", the name of the index.
2746
% \doindex just uses \parsearg; it calls \doind for the actual work.
2747
% This is because \doind is more useful to call from other macros.
2749
% There is also \dosubind {index}{topic}{subtopic}
2750
% which makes an entry in a two-level index such as the operation index.
2752
\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
2753
\def\singleindexer #1{\doind{\indexname}{#1}}
2755
% like the previous two, but they put @code around the argument.
2756
\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
2757
\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
2761
% Take care of the plain tex accent commands.
2762
\def\"{\realbackslash "}%
2763
\def\`{\realbackslash `}%
2764
\def\'{\realbackslash '}%
2765
\def\^{\realbackslash ^}%
2766
\def\~{\realbackslash ~}%
2767
\def\={\realbackslash =}%
2768
\def\b{\realbackslash b}%
2769
\def\c{\realbackslash c}%
2770
\def\d{\realbackslash d}%
2771
\def\u{\realbackslash u}%
2772
\def\v{\realbackslash v}%
2773
\def\H{\realbackslash H}%
2774
% Take care of the plain tex special European modified letters.
2775
\def\oe{\realbackslash oe}%
2776
\def\ae{\realbackslash ae}%
2777
\def\aa{\realbackslash aa}%
2778
\def\OE{\realbackslash OE}%
2779
\def\AE{\realbackslash AE}%
2780
\def\AA{\realbackslash AA}%
2781
\def\o{\realbackslash o}%
2782
\def\O{\realbackslash O}%
2783
\def\l{\realbackslash l}%
2784
\def\L{\realbackslash L}%
2785
\def\ss{\realbackslash ss}%
2786
% Take care of texinfo commands likely to appear in an index entry.
2787
% (Must be a way to avoid doing expansion at all, and thus not have to
2788
% laboriously list every single command here.)
2789
\def\@{@}% will be @@ when we switch to @ as escape char.
2790
% Need these in case \tex is in effect and \{ is a \delimiter again.
2791
% But can't use \lbracecmd and \rbracecmd because texindex assumes
2792
% braces and backslashes are used only as delimiters.
2795
\def\_{{\realbackslash _}}%
2796
\def\w{\realbackslash w }%
2797
\def\bf{\realbackslash bf }%
2798
%\def\rm{\realbackslash rm }%
2799
\def\sl{\realbackslash sl }%
2800
\def\sf{\realbackslash sf}%
2801
\def\tt{\realbackslash tt}%
2802
\def\gtr{\realbackslash gtr}%
2803
\def\less{\realbackslash less}%
2804
\def\hat{\realbackslash hat}%
2805
\def\TeX{\realbackslash TeX}%
2806
\def\dots{\realbackslash dots }%
2807
\def\result{\realbackslash result}%
2808
\def\equiv{\realbackslash equiv}%
2809
\def\expansion{\realbackslash expansion}%
2810
\def\print{\realbackslash print}%
2811
\def\error{\realbackslash error}%
2812
\def\point{\realbackslash point}%
2813
\def\copyright{\realbackslash copyright}%
2814
\def\tclose##1{\realbackslash tclose {##1}}%
2815
\def\code##1{\realbackslash code {##1}}%
2816
\def\uref##1{\realbackslash uref {##1}}%
2817
\def\url##1{\realbackslash url {##1}}%
2818
\def\env##1{\realbackslash env {##1}}%
2819
\def\command##1{\realbackslash command {##1}}%
2820
\def\option##1{\realbackslash option {##1}}%
2821
\def\dotless##1{\realbackslash dotless {##1}}%
2822
\def\samp##1{\realbackslash samp {##1}}%
2823
\def\,##1{\realbackslash ,{##1}}%
2824
\def\t##1{\realbackslash t {##1}}%
2825
\def\r##1{\realbackslash r {##1}}%
2826
\def\i##1{\realbackslash i {##1}}%
2827
\def\b##1{\realbackslash b {##1}}%
2828
\def\sc##1{\realbackslash sc {##1}}%
2829
\def\cite##1{\realbackslash cite {##1}}%
2830
\def\key##1{\realbackslash key {##1}}%
2831
\def\file##1{\realbackslash file {##1}}%
2832
\def\var##1{\realbackslash var {##1}}%
2833
\def\kbd##1{\realbackslash kbd {##1}}%
2834
\def\dfn##1{\realbackslash dfn {##1}}%
2835
\def\emph##1{\realbackslash emph {##1}}%
2836
\def\acronym##1{\realbackslash acronym {##1}}%
2838
% Handle some cases of @value -- where the variable name does not
2839
% contain - or _, and the value does not contain any
2840
% (non-fully-expandable) commands.
2841
\let\value = \expandablevalue
2844
% Turn off macro expansion
2848
% If an index command is used in an @example environment, any spaces
2849
% therein should become regular spaces in the raw index file, not the
2850
% expansion of \tie (\\leavevmode \penalty \@M \ ).
2852
\gdef\unsepspaces{\obeyspaces\let =\space}}
2854
% \indexnofonts no-ops all font-change commands.
2855
% This is used when outputting the strings to sort the index by.
2856
\def\indexdummyfont#1{#1}
2857
\def\indexdummytex{TeX}
2858
\def\indexdummydots{...}
2861
% Just ignore accents.
2862
\let\,=\indexdummyfont
2863
\let\"=\indexdummyfont
2864
\let\`=\indexdummyfont
2865
\let\'=\indexdummyfont
2866
\let\^=\indexdummyfont
2867
\let\~=\indexdummyfont
2868
\let\==\indexdummyfont
2869
\let\b=\indexdummyfont
2870
\let\c=\indexdummyfont
2871
\let\d=\indexdummyfont
2872
\let\u=\indexdummyfont
2873
\let\v=\indexdummyfont
2874
\let\H=\indexdummyfont
2875
\let\dotless=\indexdummyfont
2876
% Take care of the plain tex special European modified letters.
2888
\let\w=\indexdummyfont
2889
\let\t=\indexdummyfont
2890
\let\r=\indexdummyfont
2891
\let\i=\indexdummyfont
2892
\let\b=\indexdummyfont
2893
\let\emph=\indexdummyfont
2894
\let\strong=\indexdummyfont
2895
\let\cite=\indexdummyfont
2896
\let\sc=\indexdummyfont
2897
%Don't no-op \tt, since it isn't a user-level command
2898
% and is used in the definitions of the active chars like <, >, |...
2899
%\let\tt=\indexdummyfont
2900
\let\tclose=\indexdummyfont
2901
\let\code=\indexdummyfont
2902
\let\url=\indexdummyfont
2903
\let\uref=\indexdummyfont
2904
\let\env=\indexdummyfont
2905
\let\acronym=\indexdummyfont
2906
\let\command=\indexdummyfont
2907
\let\option=\indexdummyfont
2908
\let\file=\indexdummyfont
2909
\let\samp=\indexdummyfont
2910
\let\kbd=\indexdummyfont
2911
\let\key=\indexdummyfont
2912
\let\var=\indexdummyfont
2913
\let\TeX=\indexdummytex
2914
\let\dots=\indexdummydots
2918
% To define \realbackslash, we must make \ not be an escape.
2919
% We must first make another character (@) an escape
2920
% so we do not become unable to do a definition.
2922
{\catcode`\@=0 \catcode`\\=\other
2923
@gdef@realbackslash{\}}
2925
\let\indexbackslash=0 %overridden during \printindex.
2926
\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
2928
% For \ifx comparisons.
2929
\def\emptymacro{\empty}
2931
% Most index entries go through here, but \dosubind is the general case.
2933
\def\doind#1#2{\dosubind{#1}{#2}\empty}
2935
% Workhorse for all \fooindexes.
2936
% #1 is name of index, #2 is stuff to put there, #3 is subentry --
2937
% \empty if called from \doind, as we usually are. The main exception
2938
% is with defuns, which call us directly.
2940
\def\dosubind#1#2#3{%
2941
% Put the index entry in the margin if desired.
2942
\ifx\SETmarginindex\relax\else
2943
\insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}%
2946
\count255=\lastpenalty
2948
\indexdummies % Must do this here, since \bf, etc expand at this stage
2951
\let\folio = 0% We will expand all macros now EXCEPT \folio.
2952
\def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
2953
% so it will be output as is; and it will print as backslash.
2957
% If third arg is present, precede it with space in sort key.
2958
\ifx\thirdarg\emptymacro
2959
\let\subentry = \empty
2964
% First process the index entry with all font commands turned
2965
% off to get the string to sort by.
2966
{\indexnofonts \xdef\indexsorttmp{#2\subentry}}%
2968
% Now the real index entry with the fonts.
2971
% If the third (subentry) arg is present, add it to the index
2973
\ifx\thirdarg\emptymacro \else
2974
\toks0 = \expandafter{\the\toks0{#3}}%
2977
% Set up the complete index entry, with both the sort key and
2978
% the original text, including any font commands. We write
2979
% three arguments to \entry to the .?? file (four in the
2980
% subentry case), texindex reduces to two when writing the .??s
2983
\write\csname#1indfile\endcsname{%
2984
\realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}%
2987
% If a skip is the last thing on the list now, preserve it
2988
% by backing up by \lastskip, doing the \write, then inserting
2989
% the skip again. Otherwise, the whatsit generated by the
2990
% \write will make \lastskip zero. The result is that sequences
2995
% will have extra space inserted, because the \medbreak in the
2996
% start of the @defun won't see the skip inserted by the @end of
2997
% the previous defun.
2999
% But don't do any of this if we're not in vertical mode. We
3000
% don't want to do a \vskip and prematurely end a paragraph.
3002
% Avoid page breaks due to these extra skips, too.
3007
\ifdim\lastskip = 0pt \else \nobreak\vskip-\lastskip \fi
3010
\temp % do the write
3013
\ifvmode \ifdim\skip0 = 0pt \else \nobreak\vskip\skip0 \fi \fi
3021
% The index entry written in the file actually looks like
3022
% \entry {sortstring}{page}{topic}
3024
% \entry {sortstring}{page}{topic}{subtopic}
3025
% The texindex program reads in these files and writes files
3026
% containing these kinds of lines:
3028
% before the first topic whose initial is c
3029
% \entry {topic}{pagelist}
3030
% for a topic that is used without subtopics
3032
% for the beginning of a topic that is used with subtopics
3033
% \secondary {subtopic}{pagelist}
3034
% for each subtopic.
3036
% Define the user-accessible indexing commands
3037
% @findex, @vindex, @kindex, @cindex.
3039
\def\findex {\fnindex}
3040
\def\kindex {\kyindex}
3041
\def\cindex {\cpindex}
3042
\def\vindex {\vrindex}
3043
\def\tindex {\tpindex}
3044
\def\pindex {\pgindex}
3046
\def\cindexsub {\begingroup\obeylines\cindexsub}
3048
\gdef\cindexsub "#1" #2^^M{\endgroup %
3049
\dosubind{cp}{#2}{#1}}}
3051
% Define the macros used in formatting output of the sorted index material.
3053
% @printindex causes a particular index (the ??s file) to get printed.
3054
% It does not print any chapter heading (usually an @unnumbered).
3056
\def\printindex{\parsearg\doprintindex}
3057
\def\doprintindex#1{\begingroup
3058
\dobreak \chapheadingskip{10000}%
3064
% See if the index file exists and is nonempty.
3065
% Change catcode of @ here so that if the index file contains
3067
% as its first line, TeX doesn't complain about mismatched braces
3068
% (because it thinks @} is a control sequence).
3070
\openin 1 \jobname.#1s
3072
% \enddoublecolumns gets confused if there is no text in the index,
3073
% and it loses the chapter title and the aux file entries for the
3074
% index. The easiest way to prevent this problem is to make sure
3075
% there is some text.
3076
\putwordIndexNonexistent
3079
% If the index file exists but is empty, then \openin leaves \ifeof
3080
% false. We have to make TeX try to read something from the file, so
3081
% it can discover if there is anything in it.
3084
\putwordIndexIsEmpty
3086
% Index files are almost Texinfo source, but we use \ as the escape
3087
% character. It would be better to use @, but that's too big a change
3088
% to make right now.
3089
\def\indexbackslash{\rawbackslashxx}%
3100
% These macros are used by the sorted index file itself.
3101
% Change them to control the appearance of the index.
3104
% Some minor font changes for the special characters.
3105
\let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
3107
% Remove any glue we may have, we'll be inserting our own.
3110
% We like breaks before the index initials, so insert a bonus.
3113
% Typeset the initial. Making this add up to a whole number of
3114
% baselineskips increases the chance of the dots lining up from column
3115
% to column. It still won't often be perfect, because of the stretch
3116
% we need before each entry, but it's better.
3118
% No shrink because it confuses \balancecolumns.
3119
\vskip 1.67\baselineskip plus .5\baselineskip
3120
\leftline{\secbf #1}%
3121
\vskip .33\baselineskip plus .1\baselineskip
3123
% Do our best not to break after the initial.
3127
% This typesets a paragraph consisting of #1, dot leaders, and then #2
3128
% flush to the right margin. It is used for index and table of contents
3129
% entries. The paragraph is indented by \leftskip.
3131
\def\entry#1#2{\begingroup
3133
% Start a new paragraph if necessary, so our assignments below can't
3134
% affect previous text.
3137
% Do not fill out the last line with white space.
3140
% No extra space above this paragraph.
3143
% Do not prefer a separate line ending with a hyphen to fewer lines.
3144
\finalhyphendemerits = 0
3146
% \hangindent is only relevant when the entry text and page number
3147
% don't both fit on one line. In that case, bob suggests starting the
3148
% dots pretty far over on the line. Unfortunately, a large
3149
% indentation looks wrong when the entry text itself is broken across
3150
% lines. So we use a small indentation and put up with long leaders.
3152
% \hangafter is reset to 1 (which is the value we want) at the start
3153
% of each paragraph, so we need not do anything with that.
3156
% When the entry text needs to be broken, just fill out the first line
3158
\rightskip = 0pt plus1fil
3160
% A bit of stretch before each entry for the benefit of balancing columns.
3163
% Start a ``paragraph'' for the index entry so the line breaking
3164
% parameters we've set above will have an effect.
3167
% Insert the text of the index entry. TeX will do line-breaking on it.
3169
% The following is kludged to not output a line of dots in the index if
3170
% there are no page numbers. The next person who breaks this will be
3171
% cursed by a Unix daemon.
3174
\edef\tempc{\tempa}%
3175
\edef\tempd{\tempb}%
3176
\ifx\tempc\tempd\ \else%
3178
% If we must, put the page number on a line of its own, and fill out
3179
% this line with blank space. (The \hfil is overwhelmed with the
3180
% fill leaders glue in \indexdotfill if the page number does fit.)
3182
\null\nobreak\indexdotfill % Have leaders before the page number.
3184
% The `\ ' here is removed by the implicit \unskip that TeX does as
3185
% part of (the primitive) \par. Without it, a spurious underfull
3188
\pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
3190
\ #2% The page number ends the paragraph.
3196
% Like \dotfill except takes at least 1 em.
3197
\def\indexdotfill{\cleaders
3198
\hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill}
3200
\def\primary #1{\line{#1\hfil}}
3202
\newskip\secondaryindent \secondaryindent=0.5cm
3203
\def\secondary#1#2{{%
3208
\noindent\hskip\secondaryindent\hbox{#1}\indexdotfill
3210
\pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
3217
% Define two-column mode, which we use to typeset indexes.
3218
% Adapted from the TeXbook, page 416, which is to say,
3219
% the manmac.tex format used to print the TeXbook itself.
3223
\newdimen\doublecolumnhsize
3225
\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
3226
% Grab any single-column material above us.
3229
% Here is a possibility not foreseen in manmac: if we accumulate a
3230
% whole lot of material, we might end up calling this \output
3231
% routine twice in a row (see the doublecol-lose test, which is
3232
% essentially a couple of indexes with @setchapternewpage off). In
3233
% that case we just ship out what is in \partialpage with the normal
3234
% output routine. Generally, \partialpage will be empty when this
3235
% runs and this will be a no-op. See the indexspread.tex test case.
3236
\ifvoid\partialpage \else
3237
\onepageout{\pagecontents\partialpage}%
3240
\global\setbox\partialpage = \vbox{%
3241
% Unvbox the main output page.
3243
\kern-\topskip \kern\baselineskip
3246
\eject % run that output routine to set \partialpage
3248
% Use the double-column output routine for subsequent pages.
3249
\output = {\doublecolumnout}%
3251
% Change the page size parameters. We could do this once outside this
3252
% routine, in each of @smallbook, @afourpaper, and the default 8.5x11
3253
% format, but then we repeat the same computation. Repeating a couple
3254
% of assignments once per index is clearly meaningless for the
3255
% execution time, so we may as well do it in one place.
3257
% First we halve the line length, less a little for the gutter between
3258
% the columns. We compute the gutter based on the line length, so it
3259
% changes automatically with the paper format. The magic constant
3260
% below is chosen so that the gutter has the same value (well, +-<1pt)
3261
% as it did when we hard-coded it.
3263
% We put the result in a separate register, \doublecolumhsize, so we
3264
% can restore it in \pagesofar, after \hsize itself has (potentially)
3267
\doublecolumnhsize = \hsize
3268
\advance\doublecolumnhsize by -.04154\hsize
3269
\divide\doublecolumnhsize by 2
3270
\hsize = \doublecolumnhsize
3272
% Double the \vsize as well. (We don't need a separate register here,
3273
% since nobody clobbers \vsize.)
3277
% The double-column output routine for all double-column pages except
3280
\def\doublecolumnout{%
3281
\splittopskip=\topskip \splitmaxdepth=\maxdepth
3282
% Get the available space for the double columns -- the normal
3283
% (undoubled) page height minus any material left over from the
3287
\advance\dimen@ by -\ht\partialpage
3289
% box0 will be the left-hand column, box2 the right.
3290
\setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
3291
\onepageout\pagesofar
3293
\penalty\outputpenalty
3296
% Re-output the contents of the output page -- any previous material,
3297
% followed by the two boxes we just split, in box0 and box2.
3301
\hsize = \doublecolumnhsize
3302
\wd0=\hsize \wd2=\hsize
3303
\hbox to\pagewidth{\box0\hfil\box2}%
3306
% All done with double columns.
3307
\def\enddoublecolumns{%
3309
% Split the last of the double-column material. Leave it on the
3310
% current page, no automatic page break.
3313
% If we end up splitting too much material for the current page,
3314
% though, there will be another page break right after this \output
3315
% invocation ends. Having called \balancecolumns once, we do not
3316
% want to call it again. Therefore, reset \output to its normal
3317
% definition right away. (We hope \balancecolumns will never be
3318
% called on to balance too much material, but if it is, this makes
3319
% the output somewhat more palatable.)
3320
\global\output = {\onepageout{\pagecontents\PAGE}}%
3323
\endgroup % started in \begindoublecolumns
3325
% \pagegoal was set to the doubled \vsize above, since we restarted
3326
% the current page. We're now back to normal single-column
3327
% typesetting, so reset \pagegoal to the normal \vsize (after the
3328
% \endgroup where \vsize got restored).
3332
% Called at the end of the double column material.
3333
\def\balancecolumns{%
3334
\setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
3336
\advance\dimen@ by \topskip
3337
\advance\dimen@ by-\baselineskip
3338
\divide\dimen@ by 2 % target to split to
3339
%debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}%
3340
\splittopskip = \topskip
3341
% Loop until we get a decent breakpoint.
3345
\global\setbox3 = \copy0
3346
\global\setbox1 = \vsplit3 to \dimen@
3348
\global\advance\dimen@ by 1pt
3351
%debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
3352
\setbox0=\vbox to\dimen@{\unvbox1}%
3353
\setbox2=\vbox to\dimen@{\unvbox3}%
3357
\catcode`\@ = \other
3360
\message{sectioning,}
3361
% Chapters, sections, etc.
3364
\newcount\secno \secno=0
3365
\newcount\subsecno \subsecno=0
3366
\newcount\subsubsecno \subsubsecno=0
3368
% This counter is funny since it counts through charcodes of letters A, B, ...
3369
\newcount\appendixno \appendixno = `\@
3370
% \def\appendixletter{\char\the\appendixno}
3371
% We do the following for the sake of pdftex, which needs the actual
3372
% letter in the expansion, not just typeset.
3373
\def\appendixletter{%
3374
\ifnum\appendixno=`A A%
3375
\else\ifnum\appendixno=`B B%
3376
\else\ifnum\appendixno=`C C%
3377
\else\ifnum\appendixno=`D D%
3378
\else\ifnum\appendixno=`E E%
3379
\else\ifnum\appendixno=`F F%
3380
\else\ifnum\appendixno=`G G%
3381
\else\ifnum\appendixno=`H H%
3382
\else\ifnum\appendixno=`I I%
3383
\else\ifnum\appendixno=`J J%
3384
\else\ifnum\appendixno=`K K%
3385
\else\ifnum\appendixno=`L L%
3386
\else\ifnum\appendixno=`M M%
3387
\else\ifnum\appendixno=`N N%
3388
\else\ifnum\appendixno=`O O%
3389
\else\ifnum\appendixno=`P P%
3390
\else\ifnum\appendixno=`Q Q%
3391
\else\ifnum\appendixno=`R R%
3392
\else\ifnum\appendixno=`S S%
3393
\else\ifnum\appendixno=`T T%
3394
\else\ifnum\appendixno=`U U%
3395
\else\ifnum\appendixno=`V V%
3396
\else\ifnum\appendixno=`W W%
3397
\else\ifnum\appendixno=`X X%
3398
\else\ifnum\appendixno=`Y Y%
3399
\else\ifnum\appendixno=`Z Z%
3400
% The \the is necessary, despite appearances, because \appendixletter is
3401
% expanded while writing the .toc file. \char\appendixno is not
3402
% expandable, thus it is written literally, thus all appendixes come out
3403
% with the same letter (or @) in the toc without it.
3404
\else\char\the\appendixno
3405
\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
3406
\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
3408
% Each @chapter defines this as the name of the chapter.
3409
% page headings and footings can use it. @section does likewise.
3413
\newcount\absseclevel % used to calculate proper heading level
3414
\newcount\secbase\secbase=0 % @raise/lowersections modify this count
3416
% @raisesections: treat @section as chapter, @subsection as section, etc.
3417
\def\raisesections{\global\advance\secbase by -1}
3418
\let\up=\raisesections % original BFox name
3420
% @lowersections: treat @chapter as section, @section as subsection, etc.
3421
\def\lowersections{\global\advance\secbase by 1}
3422
\let\down=\lowersections % original BFox name
3424
% Choose a numbered-heading macro
3425
% #1 is heading level if unmodified by @raisesections or @lowersections
3426
% #2 is text for heading
3427
\def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
3433
\numberedsubseczzz{#2}
3435
\numberedsubsubseczzz{#2}
3437
\ifnum \absseclevel<0
3440
\numberedsubsubseczzz{#2}
3445
% like \numhead, but chooses appendix heading levels
3446
\def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
3450
\appendixsectionzzz{#2}
3452
\appendixsubseczzz{#2}
3454
\appendixsubsubseczzz{#2}
3456
\ifnum \absseclevel<0
3459
\appendixsubsubseczzz{#2}
3464
% like \numhead, but chooses numberless heading levels
3465
\def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
3469
\unnumberedseczzz{#2}
3471
\unnumberedsubseczzz{#2}
3473
\unnumberedsubsubseczzz{#2}
3475
\ifnum \absseclevel<0
3478
\unnumberedsubsubseczzz{#2}
3483
% @chapter, @appendix, @unnumbered.
3484
\def\thischaptername{No Chapter Title}
3485
\outer\def\chapter{\parsearg\chapteryyy}
3486
\def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz
3487
\def\chapterzzz #1{%
3488
\secno=0 \subsecno=0 \subsubsecno=0
3489
\global\advance \chapno by 1 \message{\putwordChapter\space \the\chapno}%
3490
\chapmacro {#1}{\the\chapno}%
3491
\gdef\thissection{#1}%
3492
\gdef\thischaptername{#1}%
3493
% We don't substitute the actual chapter name into \thischapter
3494
% because we don't want its macros evaluated now.
3495
\xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}%
3497
\edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}%
3501
\global\let\section = \numberedsec
3502
\global\let\subsection = \numberedsubsec
3503
\global\let\subsubsection = \numberedsubsubsec
3506
\outer\def\appendix{\parsearg\appendixyyy}
3507
\def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz
3508
\def\appendixzzz #1{%
3509
\secno=0 \subsecno=0 \subsubsecno=0
3510
\global\advance \appendixno by 1
3511
\message{\putwordAppendix\space \appendixletter}%
3512
\chapmacro {#1}{\putwordAppendix{} \appendixletter}%
3513
\gdef\thissection{#1}%
3514
\gdef\thischaptername{#1}%
3515
\xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}%
3517
\edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}%
3518
{\putwordAppendix{} \appendixletter}}}%
3521
\global\let\section = \appendixsec
3522
\global\let\subsection = \appendixsubsec
3523
\global\let\subsubsection = \appendixsubsubsec
3526
% @centerchap is like @unnumbered, but the heading is centered.
3527
\outer\def\centerchap{\parsearg\centerchapyyy}
3528
\def\centerchapyyy #1{{\let\unnumbchapmacro=\centerchapmacro \unnumberedyyy{#1}}}
3530
% @top is like @unnumbered.
3531
\outer\def\top{\parsearg\unnumberedyyy}
3533
\outer\def\unnumbered{\parsearg\unnumberedyyy}
3534
\def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
3535
\def\unnumberedzzz #1{%
3536
\secno=0 \subsecno=0 \subsubsecno=0
3538
% This used to be simply \message{#1}, but TeX fully expands the
3539
% argument to \message. Therefore, if #1 contained @-commands, TeX
3540
% expanded them. For example, in `@unnumbered The @cite{Book}', TeX
3541
% expanded @cite (which turns out to cause errors because \cite is meant
3542
% to be executed, not expanded).
3544
% Anyway, we don't want the fully-expanded definition of @cite to appear
3545
% as a result of the \message, we just want `@cite' itself. We use
3546
% \the<toks register> to achieve this: TeX expands \the<toks> only once,
3547
% simply yielding the contents of <toks register>. (We also do this for
3549
\toks0 = {#1}\message{(\the\toks0)}%
3551
\unnumbchapmacro {#1}%
3552
\gdef\thischapter{#1}\gdef\thissection{#1}%
3554
\edef\temp{\noexpand\writetocentry{\realbackslash unnumbchapentry{\the\toks0}}}%
3557
\global\let\section = \unnumberedsec
3558
\global\let\subsection = \unnumberedsubsec
3559
\global\let\subsubsection = \unnumberedsubsubsec
3563
\outer\def\numberedsec{\parsearg\secyyy}
3564
\def\secyyy #1{\numhead1{#1}} % normally calls seczzz
3566
\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
3567
\gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}%
3569
\edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}%
3570
{\the\chapno}{\the\secno}}}%
3576
\outer\def\appendixsection{\parsearg\appendixsecyyy}
3577
\outer\def\appendixsec{\parsearg\appendixsecyyy}
3578
\def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz
3579
\def\appendixsectionzzz #1{%
3580
\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
3581
\gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}%
3583
\edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}%
3584
{\appendixletter}{\the\secno}}}%
3590
\outer\def\unnumberedsec{\parsearg\unnumberedsecyyy}
3591
\def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz
3592
\def\unnumberedseczzz #1{%
3593
\plainsecheading {#1}\gdef\thissection{#1}%
3595
\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsecentry{\the\toks0}}}%
3602
\outer\def\numberedsubsec{\parsearg\numberedsubsecyyy}
3603
\def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz
3604
\def\numberedsubseczzz #1{%
3605
\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
3606
\subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}%
3608
\edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}%
3609
{\the\chapno}{\the\secno}{\the\subsecno}}}%
3615
\outer\def\appendixsubsec{\parsearg\appendixsubsecyyy}
3616
\def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz
3617
\def\appendixsubseczzz #1{%
3618
\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
3619
\subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}%
3621
\edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}%
3622
{\appendixletter}{\the\secno}{\the\subsecno}}}%
3628
\outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy}
3629
\def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
3630
\def\unnumberedsubseczzz #1{%
3631
\plainsubsecheading {#1}\gdef\thissection{#1}%
3633
\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsecentry%
3641
\outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy}
3642
\def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz
3643
\def\numberedsubsubseczzz #1{%
3644
\gdef\thissection{#1}\global\advance \subsubsecno by 1 %
3645
\subsubsecheading {#1}
3646
{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
3648
\edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}%
3649
{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}%
3655
\outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy}
3656
\def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz
3657
\def\appendixsubsubseczzz #1{%
3658
\gdef\thissection{#1}\global\advance \subsubsecno by 1 %
3659
\subsubsecheading {#1}
3660
{\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
3662
\edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}%
3663
{\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}%
3669
\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy}
3670
\def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
3671
\def\unnumberedsubsubseczzz #1{%
3672
\plainsubsubsecheading {#1}\gdef\thissection{#1}%
3674
\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsubsecentry%
3681
% These are variants which are not "outer", so they can appear in @ifinfo.
3682
% Actually, they should now be obsolete; ordinary section commands should work.
3683
\def\infotop{\parsearg\unnumberedzzz}
3684
\def\infounnumbered{\parsearg\unnumberedzzz}
3685
\def\infounnumberedsec{\parsearg\unnumberedseczzz}
3686
\def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz}
3687
\def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz}
3689
\def\infoappendix{\parsearg\appendixzzz}
3690
\def\infoappendixsec{\parsearg\appendixseczzz}
3691
\def\infoappendixsubsec{\parsearg\appendixsubseczzz}
3692
\def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz}
3694
\def\infochapter{\parsearg\chapterzzz}
3695
\def\infosection{\parsearg\sectionzzz}
3696
\def\infosubsection{\parsearg\subsectionzzz}
3697
\def\infosubsubsection{\parsearg\subsubsectionzzz}
3699
% These macros control what the section commands do, according
3700
% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
3701
% Define them by default for a numbered chapter.
3702
\global\let\section = \numberedsec
3703
\global\let\subsection = \numberedsubsec
3704
\global\let\subsubsection = \numberedsubsubsec
3706
% Define @majorheading, @heading and @subheading
3708
% NOTE on use of \vbox for chapter headings, section headings, and such:
3709
% 1) We use \vbox rather than the earlier \line to permit
3710
% overlong headings to fold.
3711
% 2) \hyphenpenalty is set to 10000 because hyphenation in a
3712
% heading is obnoxious; this forbids it.
3713
% 3) Likewise, headings look best if no \parindent is used, and
3714
% if justification is not attempted. Hence \raggedright.
3717
\def\majorheading{\parsearg\majorheadingzzz}
3718
\def\majorheadingzzz #1{%
3719
{\advance\chapheadingskip by 10pt \chapbreak }%
3720
{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3721
\parindent=0pt\raggedright
3722
\rm #1\hfill}}\bigskip \par\penalty 200}
3724
\def\chapheading{\parsearg\chapheadingzzz}
3725
\def\chapheadingzzz #1{\chapbreak %
3726
{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3727
\parindent=0pt\raggedright
3728
\rm #1\hfill}}\bigskip \par\penalty 200}
3730
% @heading, @subheading, @subsubheading.
3731
\def\heading{\parsearg\plainsecheading}
3732
\def\subheading{\parsearg\plainsubsecheading}
3733
\def\subsubheading{\parsearg\plainsubsubsecheading}
3735
% These macros generate a chapter, section, etc. heading only
3736
% (including whitespace, linebreaking, etc. around it),
3737
% given all the information in convenient, parsed form.
3739
%%% Args are the skip and penalty (usually negative)
3740
\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
3742
\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
3744
%%% Define plain chapter starts, and page on/off switching for it
3745
% Parameter controlling skip before chapter headings (if needed)
3747
\newskip\chapheadingskip
3749
\def\chapbreak{\dobreak \chapheadingskip {-4000}}
3750
\def\chappager{\par\vfill\supereject}
3751
\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi}
3753
\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
3756
\global\let\contentsalignmacro = \chappager
3757
\global\let\pchapsepmacro=\chapbreak
3758
\global\let\pagealignmacro=\chappager}
3761
\global\let\contentsalignmacro = \chappager
3762
\global\let\pchapsepmacro=\chappager
3763
\global\let\pagealignmacro=\chappager
3764
\global\def\HEADINGSon{\HEADINGSsingle}}
3767
\global\let\contentsalignmacro = \chapoddpage
3768
\global\let\pchapsepmacro=\chapoddpage
3769
\global\let\pagealignmacro=\chapoddpage
3770
\global\def\HEADINGSon{\HEADINGSdouble}}
3775
\global\let\chapmacro=\chfplain
3776
\global\let\unnumbchapmacro=\unnchfplain
3777
\global\let\centerchapmacro=\centerchfplain}
3779
% Plain chapter opening.
3780
% #1 is the text, #2 the chapter number or empty if unnumbered.
3786
\setbox0 = \hbox{#2\ifx\chapnum\empty\else\enspace\fi}%
3787
\vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
3788
\hangindent = \wd0 \centerparametersmaybe
3791
\nobreak\bigskip % no page break after a chapter title
3795
% Plain opening for unnumbered.
3796
\def\unnchfplain#1{\chfplain{#1}{}}
3798
% @centerchap -- centered and unnumbered.
3799
\let\centerparametersmaybe = \relax
3800
\def\centerchfplain#1{{%
3801
\def\centerparametersmaybe{%
3802
\advance\rightskip by 3\rightskip
3803
\leftskip = \rightskip
3809
\CHAPFplain % The default
3811
\def\unnchfopen #1{%
3812
\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3813
\parindent=0pt\raggedright
3814
\rm #1\hfill}}\bigskip \par\nobreak
3817
\def\chfopen #1#2{\chapoddpage {\chapfonts
3818
\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
3822
\def\centerchfopen #1{%
3823
\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3825
\hfill {\rm #1}\hfill}}\bigskip \par\nobreak
3829
\global\let\chapmacro=\chfopen
3830
\global\let\unnumbchapmacro=\unnchfopen
3831
\global\let\centerchapmacro=\centerchfopen}
3835
\newskip\secheadingskip
3836
\def\secheadingbreak{\dobreak \secheadingskip {-1000}}
3837
\def\secheading#1#2#3{\sectionheading{sec}{#2.#3}{#1}}
3838
\def\plainsecheading#1{\sectionheading{sec}{}{#1}}
3840
% Subsection titles.
3841
\newskip \subsecheadingskip
3842
\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}}
3843
\def\subsecheading#1#2#3#4{\sectionheading{subsec}{#2.#3.#4}{#1}}
3844
\def\plainsubsecheading#1{\sectionheading{subsec}{}{#1}}
3846
% Subsubsection titles.
3847
\let\subsubsecheadingskip = \subsecheadingskip
3848
\let\subsubsecheadingbreak = \subsecheadingbreak
3849
\def\subsubsecheading#1#2#3#4#5{\sectionheading{subsubsec}{#2.#3.#4.#5}{#1}}
3850
\def\plainsubsubsecheading#1{\sectionheading{subsubsec}{}{#1}}
3853
% Print any size section title.
3855
% #1 is the section type (sec/subsec/subsubsec), #2 is the section
3856
% number (maybe empty), #3 the text.
3857
\def\sectionheading#1#2#3{%
3859
\expandafter\advance\csname #1headingskip\endcsname by \parskip
3860
\csname #1headingbreak\endcsname
3863
% Switch to the right set of fonts.
3864
\csname #1fonts\endcsname \rm
3866
% Only insert the separating space if we have a section number.
3868
\setbox0 = \hbox{#2\ifx\secnum\empty\else\enspace\fi}%
3870
\vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
3871
\hangindent = \wd0 % zero if no section number
3874
\ifdim\parskip<10pt \nobreak\kern10pt\nobreak\kern-\parskip\fi \nobreak
3879
% Table of contents.
3882
% Write an entry to the toc file, opening it if necessary.
3883
% Called from @chapter, etc. We supply {\folio} at the end of the
3884
% argument, which will end up as the last argument to the \...entry macro.
3886
% We open the .toc file here instead of at @setfilename or any other
3887
% given time so that @contents can be put in the document anywhere.
3889
\newif\iftocfileopened
3890
\def\writetocentry#1{%
3891
\iftocfileopened\else
3892
\immediate\openout\tocfile = \jobname.toc
3893
\global\tocfileopenedtrue
3895
\iflinks \write\tocfile{#1{\folio}}\fi
3898
\newskip\contentsrightmargin \contentsrightmargin=1in
3899
\newcount\savepageno
3900
\newcount\lastnegativepageno \lastnegativepageno = -1
3902
% Finish up the main text and prepare to read what we've written
3905
\def\startcontents#1{%
3906
% If @setchapternewpage on, and @headings double, the contents should
3907
% start on an odd page, unlike chapters. Thus, we maintain
3908
% \contentsalignmacro in parallel with \pagealignmacro.
3909
% From: Torbjorn Granlund <tege@matematik.su.se>
3911
\immediate\closeout\tocfile
3913
% Don't need to put `Contents' or `Short Contents' in the headline.
3914
% It is abundantly clear what they are.
3915
\unnumbchapmacro{#1}\def\thischapter{}%
3916
\savepageno = \pageno
3917
\begingroup % Set up to handle contents files properly.
3918
\catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11
3919
% We can't do this, because then an actual ^ in a section
3920
% title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97.
3921
%\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
3922
\raggedbottom % Worry more about breakpoints than the bottom.
3923
\advance\hsize by -\contentsrightmargin % Don't use the full line length.
3925
% Roman numerals for page numbers.
3926
\ifnum \pageno>0 \pageno = \lastnegativepageno \fi
3930
% Normal (long) toc.
3932
\startcontents{\putwordTOC}%
3933
\openin 1 \jobname.toc
3939
\contentsalignmacro % in case @setchapternewpage odd is in effect
3942
\lastnegativepageno = \pageno
3943
\pageno = \savepageno
3946
% And just the chapters.
3947
\def\summarycontents{%
3948
\startcontents{\putwordShortTOC}%
3950
\let\chapentry = \shortchapentry
3951
\let\unnumbchapentry = \shortunnumberedentry
3952
% We want a true roman here for the page numbers.
3954
\let\rm=\shortcontrm \let\bf=\shortcontbf \let\sl=\shortcontsl
3956
\hyphenpenalty = 10000
3957
\advance\baselineskip by 1pt % Open it up a little.
3958
\def\secentry ##1##2##3##4{}
3959
\def\unnumbsecentry ##1##2{}
3960
\def\subsecentry ##1##2##3##4##5{}
3961
\def\unnumbsubsecentry ##1##2{}
3962
\def\subsubsecentry ##1##2##3##4##5##6{}
3963
\def\unnumbsubsubsecentry ##1##2{}
3964
\openin 1 \jobname.toc
3970
\contentsalignmacro % in case @setchapternewpage odd is in effect
3972
\lastnegativepageno = \pageno
3973
\pageno = \savepageno
3975
\let\shortcontents = \summarycontents
3978
\pdfcatalog{/PageMode /UseOutlines}%
3981
% These macros generate individual entries in the table of contents.
3982
% The first argument is the chapter or section name.
3983
% The last argument is the page number.
3984
% The arguments in between are the chapter number, section number, ...
3986
% Chapter-level things, for both the long and short contents.
3987
\def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}}
3989
% See comments in \dochapentry re vbox and related settings
3990
\def\shortchapentry#1#2#3{%
3991
\tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#3\egroup}%
3994
% Typeset the label for a chapter or appendix for the short contents.
3995
% The arg is, e.g. `Appendix A' for an appendix, or `3' for a chapter.
3996
% We could simplify the code here by writing out an \appendixentry
3997
% command in the toc file for appendices, instead of using \chapentry
3998
% for both, but it doesn't seem worth it.
4000
\newdimen\shortappendixwidth
4002
\def\shortchaplabel#1{%
4003
% Compute width of word "Appendix", may change with language.
4004
\setbox0 = \hbox{\shortcontrm \putwordAppendix}%
4005
\shortappendixwidth = \wd0
4007
% We typeset #1 in a box of constant width, regardless of the text of
4008
% #1, so the chapter titles will come out aligned.
4009
\setbox0 = \hbox{#1}%
4010
\dimen0 = \ifdim\wd0 > \shortappendixwidth \shortappendixwidth \else 0pt \fi
4012
% This space should be plenty, since a single number is .5em, and the
4013
% widest letter (M) is 1em, at least in the Computer Modern fonts.
4014
% (This space doesn't include the extra space that gets added after
4015
% the label; that gets put in by \shortchapentry above.)
4016
\advance\dimen0 by 1.1em
4017
\hbox to \dimen0{#1\hfil}%
4020
\def\unnumbchapentry#1#2{\dochapentry{#1}{#2}}
4021
\def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno\bgroup#2\egroup}}
4024
\def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}}
4025
\def\unnumbsecentry#1#2{\dosecentry{#1}{#2}}
4028
\def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}}
4029
\def\unnumbsubsecentry#1#2{\dosubsecentry{#1}{#2}}
4031
% And subsubsections.
4032
\def\subsubsecentry#1#2#3#4#5#6{%
4033
\dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}}
4034
\def\unnumbsubsubsecentry#1#2{\dosubsubsecentry{#1}{#2}}
4036
% This parameter controls the indentation of the various levels.
4037
\newdimen\tocindent \tocindent = 3pc
4039
% Now for the actual typesetting. In all these, #1 is the text and #2 is the
4042
% If the toc has to be broken over pages, we want it to be at chapters
4043
% if at all possible; hence the \penalty.
4044
\def\dochapentry#1#2{%
4045
\penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
4048
\tocentry{#1}{\dopageno\bgroup#2\egroup}%
4050
\nobreak\vskip .25\baselineskip plus.1\baselineskip
4053
\def\dosecentry#1#2{\begingroup
4054
\secentryfonts \leftskip=\tocindent
4055
\tocentry{#1}{\dopageno\bgroup#2\egroup}%
4058
\def\dosubsecentry#1#2{\begingroup
4059
\subsecentryfonts \leftskip=2\tocindent
4060
\tocentry{#1}{\dopageno\bgroup#2\egroup}%
4063
\def\dosubsubsecentry#1#2{\begingroup
4064
\subsubsecentryfonts \leftskip=3\tocindent
4065
\tocentry{#1}{\dopageno\bgroup#2\egroup}%
4068
% Final typesetting of a toc entry; we use the same \entry macro as for
4069
% the index entries, but we want to suppress hyphenation here. (We
4070
% can't do that in the \entry macro, since index entries might consist
4071
% of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.)
4072
\def\tocentry#1#2{\begingroup
4073
\vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks
4074
% Do not use \turnoffactive in these arguments. Since the toc is
4075
% typeset in cmr, so characters such as _ would come out wrong; we
4076
% have to do the usual translation tricks.
4080
% Space between chapter (or whatever) number and the title.
4081
\def\labelspace{\hskip1em \relax}
4083
\def\dopageno#1{{\rm #1}}
4084
\def\doshortpageno#1{{\rm #1}}
4086
\def\chapentryfonts{\secfonts \rm}
4087
\def\secentryfonts{\textfonts}
4088
\let\subsecentryfonts = \textfonts
4089
\let\subsubsecentryfonts = \textfonts
4092
\message{environments,}
4093
% @foo ... @end foo.
4095
% Since these characters are used in examples, it should be an even number of
4096
% \tt widths. Each \tt character is 1en, so two makes it 1em.
4097
% Furthermore, these definitions must come after we define our fonts.
4098
\newbox\dblarrowbox \newbox\longdblarrowbox
4099
\newbox\pushcharbox \newbox\bullbox
4100
\newbox\equivbox \newbox\errorbox
4103
%\global\setbox\dblarrowbox = \hbox to 1em{\hfil$\Rightarrow$\hfil}
4104
%\global\setbox\longdblarrowbox = \hbox to 1em{\hfil$\mapsto$\hfil}
4105
%\global\setbox\pushcharbox = \hbox to 1em{\hfil$\dashv$\hfil}
4106
%\global\setbox\equivbox = \hbox to 1em{\hfil$\ptexequiv$\hfil}
4107
% Adapted from the manmac format (p.420 of TeXbook)
4108
%\global\setbox\bullbox = \hbox to 1em{\kern.15em\vrule height .75ex width .85ex
4112
% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
4114
\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
4115
\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
4116
\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
4117
\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
4119
% Adapted from the TeXbook's \boxit.
4120
{\tentt \global\dimen0 = 3em}% Width of the box.
4121
\dimen2 = .55pt % Thickness of rules
4122
% The text. (`r' is open on the right, `e' somewhat less so on the left.)
4123
\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
4125
\global\setbox\errorbox=\hbox to \dimen0{\hfil
4126
\hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
4127
\advance\hsize by -2\dimen2 % Rules.
4129
\hrule height\dimen2
4130
\hbox{\vrule width\dimen2 \kern3pt % Space to left of text.
4131
\vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
4132
\kern3pt\vrule width\dimen2}% Space to right.
4133
\hrule height\dimen2}
4136
% The @error{} command.
4137
\def\error{\leavevmode\lower.7ex\copy\errorbox}
4139
% @tex ... @end tex escapes into raw Tex temporarily.
4140
% One exception: @ is still an escape character, so that @end tex works.
4141
% But \@ or @@ will get a plain tex @ character.
4143
\def\tex{\begingroup
4144
\catcode `\\=0 \catcode `\{=1 \catcode `\}=2
4145
\catcode `\$=3 \catcode `\&=4 \catcode `\#=6
4146
\catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie
4148
\catcode 43=12 % plus
4157
\let\bullet=\ptexbullet
4162
\let\equiv=\ptexequiv
4171
\def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
4172
\def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
4174
\let\Etex=\endgroup}
4176
% Define @lisp ... @endlisp.
4177
% @lisp does a \begingroup so it can rebind things,
4178
% including the definition of @endlisp (which normally is erroneous).
4180
% Amount to narrow the margins by for @lisp.
4181
\newskip\lispnarrowing \lispnarrowing=0.4in
4183
% This is the definition that ^^M gets inside @lisp, @example, and other
4184
% such environments. \null is better than a space, since it doesn't
4186
\def\lisppar{\null\endgraf}
4188
% Make each space character in the input produce a normal interword
4189
% space in the output. Don't allow a line break at this space, as this
4190
% is used only in environments like @example, where each line of input
4191
% should produce a line of output anyway.
4194
\gdef\sepspaces{\obeyspaces\let =\tie}}
4196
% Define \obeyedspace to be our active space, whatever it is. This is
4197
% for use in \parsearg.
4199
\global\let\obeyedspace= }
4201
% This space is always present above and below environments.
4202
\newskip\envskipamount \envskipamount = 0pt
4204
% Make spacing and below environment symmetrical. We use \parskip here
4205
% to help in doing that, since in @example-like environments \parskip
4206
% is reset to zero; thus the \afterenvbreak inserts no space -- but the
4207
% start of the next paragraph will insert \parskip
4209
\def\aboveenvbreak{{%
4210
\ifnum\lastpenalty < 10000
4211
\advance\envskipamount by \parskip
4213
\ifdim\lastskip<\envskipamount
4216
\vskip\envskipamount
4221
\let\afterenvbreak = \aboveenvbreak
4223
% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins.
4224
\let\nonarrowing=\relax
4226
% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
4227
% environment contents.
4228
\font\circle=lcircle10
4230
\newdimen\cartouter\newdimen\cartinner
4231
\newskip\normbskip\newskip\normpskip\newskip\normlskip
4232
\circthick=\fontdimen8\circle
4234
\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
4235
\def\ctr{{\hskip 6pt\circle\char'010}}
4236
\def\cbl{{\circle\char'012\hskip -6pt}}
4237
\def\cbr{{\hskip 6pt\circle\char'011}}
4238
\def\carttop{\hbox to \cartouter{\hskip\lskip
4239
\ctl\leaders\hrule height\circthick\hfil\ctr
4241
\def\cartbot{\hbox to \cartouter{\hskip\lskip
4242
\cbl\leaders\hrule height\circthick\hfil\cbr
4245
\newskip\lskip\newskip\rskip
4247
\long\def\cartouche{%
4249
\lskip=\leftskip \rskip=\rightskip
4250
\leftskip=0pt\rightskip=0pt %we want these *outside*.
4251
\cartinner=\hsize \advance\cartinner by-\lskip
4252
\advance\cartinner by-\rskip
4254
\advance\cartouter by 18.4pt % allow for 3pt kerns on either
4255
% side, and for 6pt waste from
4256
% each corner char, and rule thickness
4257
\normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
4258
% Flag to tell @lisp, etc., not to narrow margin.
4259
\let\nonarrowing=\comment
4261
\baselineskip=0pt\parskip=0pt\lineskip=0pt
4270
\baselineskip=\normbskip
4271
\lineskip=\normlskip
4287
% This macro is called at the beginning of all the @example variants,
4291
\inENV % This group ends at the end of the body
4292
\hfuzz = 12pt % Don't be fussy
4293
\sepspaces % Make spaces be word-separators rather than space tokens.
4295
\let\par = \lisppar % don't ignore blank lines
4296
\obeylines % each line of input is a line of output
4299
\emergencystretch = 0pt % don't try to avoid overfull boxes
4300
% @cartouche defines \nonarrowing to inhibit narrowing
4301
% at next level down.
4302
\ifx\nonarrowing\relax
4303
\advance \leftskip by \lispnarrowing
4304
\exdentamount=\lispnarrowing
4305
\let\exdent=\nofillexdent
4306
\let\nonarrowing=\relax
4310
% Define the \E... control sequence only if we are inside the particular
4311
% environment, so the error checking in \end will work.
4313
% To end an @example-like environment, we first end the paragraph (via
4314
% \afterenvbreak's vertical glue), and then the group. That way we keep
4315
% the zero \parskip that the environments set -- \parskip glue will be
4316
% inserted at the beginning of the next paragraph in the document, after
4319
\def\nonfillfinish{\afterenvbreak\endgroup}
4321
% @lisp: indented, narrowed, typewriter font.
4322
\def\lisp{\begingroup
4324
\let\Elisp = \nonfillfinish
4326
\let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
4327
\gobble % eat return
4330
% @example: Same as @lisp.
4331
\def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp}
4333
% @small... is usually equivalent to the non-small (@smallbook
4334
% redefines). We must call \example (or whatever) last in the
4335
% definition, since it reads the return following the @example (or
4336
% whatever) command.
4338
% This actually allows (for example) @end display inside an
4339
% @smalldisplay. Too bad, but makeinfo will catch the error anyway.
4341
\def\smalldisplay{\begingroup\def\Esmalldisplay{\nonfillfinish\endgroup}\display}
4342
\def\smallexample{\begingroup\def\Esmallexample{\nonfillfinish\endgroup}\lisp}
4343
\def\smallformat{\begingroup\def\Esmallformat{\nonfillfinish\endgroup}\format}
4344
\def\smalllisp{\begingroup\def\Esmalllisp{\nonfillfinish\endgroup}\lisp}
4346
% Real @smallexample and @smalllisp (when @smallbook): use smaller fonts.
4347
% Originally contributed by Pavel@xerox.
4348
\def\smalllispx{\begingroup
4349
\def\Esmalllisp{\nonfillfinish\endgroup}%
4350
\def\Esmallexample{\nonfillfinish\endgroup}%
4355
% @display: same as @lisp except keep current font.
4357
\def\display{\begingroup
4359
\let\Edisplay = \nonfillfinish
4363
% @smalldisplay (when @smallbook): @display plus smaller fonts.
4365
\def\smalldisplayx{\begingroup
4366
\def\Esmalldisplay{\nonfillfinish\endgroup}%
4367
\smallexamplefonts \rm
4371
% @format: same as @display except don't narrow margins.
4373
\def\format{\begingroup
4374
\let\nonarrowing = t
4376
\let\Eformat = \nonfillfinish
4380
% @smallformat (when @smallbook): @format plus smaller fonts.
4382
\def\smallformatx{\begingroup
4383
\def\Esmallformat{\nonfillfinish\endgroup}%
4384
\smallexamplefonts \rm
4388
% @flushleft (same as @format).
4390
\def\flushleft{\begingroup \def\Eflushleft{\nonfillfinish\endgroup}\format}
4394
\def\flushright{\begingroup
4395
\let\nonarrowing = t
4397
\let\Eflushright = \nonfillfinish
4398
\advance\leftskip by 0pt plus 1fill
4403
% @quotation does normal linebreaking (hence we can't use \nonfillstart)
4404
% and narrows the margins.
4407
\begingroup\inENV %This group ends at the end of the @quotation body
4408
{\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
4411
% We have retained a nonzero parskip for the environment, since we're
4412
% doing normal filling. So to avoid extra space below the environment...
4413
\def\Equotation{\parskip = 0pt \nonfillfinish}%
4415
% @cartouche defines \nonarrowing to inhibit narrowing at next level down.
4416
\ifx\nonarrowing\relax
4417
\advance\leftskip by \lispnarrowing
4418
\advance\rightskip by \lispnarrowing
4419
\exdentamount = \lispnarrowing
4420
\let\nonarrowing = \relax
4425
% LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
4426
% If we want to allow any <char> as delimiter,
4427
% we need the curly braces so that makeinfo sees the @verb command, eg:
4428
% `@verbx...x' would look like the '@verbx' command. --janneke@gnu.org
4430
% [Knuth]: Donald Ervin Knuth, 1996. The TeXbook.
4432
% [Knuth] p. 344; only we need to do '@' too
4434
\do\ \do\\\do\@\do\{\do\}\do\$\do\&%
4435
\do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~}
4438
\def\uncatcodespecials{%
4439
\def\do##1{\catcode`##1=12}\dospecials}
4441
% [Knuth] pp. 380,381,391
4442
% Disable Spanish ligatures ?` and !` of \tt font
4444
\catcode`\`=\active\gdef`{\relax\lq}
4447
% Setup for the @verb command.
4449
% Eight spaces for a tab
4451
\catcode`\^^I=\active
4452
\gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }}
4456
\tt % easiest (and conventionally used) font for verbatim
4457
\def\par{\leavevmode\endgraf}%
4460
% Respect line breaks,
4461
% print special symbols as themselves, and
4462
% make each space count
4463
% must do in this order:
4464
\obeylines \uncatcodespecials \sepspaces
4467
% Setup for the @verbatim environment
4469
% Real tab expansion
4470
\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
4472
\def\starttabbox{\setbox0=\hbox\bgroup}
4474
\catcode`\^^I=\active
4476
\catcode`\^^I=\active
4477
\def^^I{\leavevmode\egroup
4478
\dimen0=\wd0 % the width so far, or since the previous tab
4479
\divide\dimen0 by\tabw
4480
\multiply\dimen0 by\tabw % compute previous multiple of \tabw
4481
\advance\dimen0 by\tabw % advance to next multiple of \tabw
4482
\wd0=\dimen0 \box0 \starttabbox
4486
\def\setupverbatim{%
4487
% Easiest (and conventionally used) font for verbatim
4489
\def\par{\leavevmode\egroup\box0\endgraf}%
4492
% Respect line breaks,
4493
% print special symbols as themselves, and
4494
% make each space count
4495
% must do in this order:
4496
\obeylines \uncatcodespecials \sepspaces
4497
\everypar{\starttabbox}%
4500
% Do the @verb magic: verbatim text is quoted by unique
4501
% delimiter characters. Before first delimiter expect a
4502
% right brace, after last delimiter expect closing brace:
4504
% \def\doverb'{'<char>#1<char>'}'{#1}
4506
% [Knuth] p. 382; only eat outer {}
4508
\catcode`[=1\catcode`]=2\catcode`\{=12\catcode`\}=12
4509
\gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
4512
\def\verb{\begingroup\setupverb\doverb}
4515
% Do the @verbatim magic: define the macro \doverbatim so that
4516
% the (first) argument ends when '@end verbatim' is reached, ie:
4518
% \def\doverbatim#1@end verbatim{#1}
4520
% For Texinfo it's a lot easier than for LaTeX,
4521
% because texinfo's \verbatim doesn't stop at '\end{verbatim}':
4522
% we need not redefine '\', '{' and '}'
4524
% Inspired by LaTeX's verbatim command set [latex.ltx]
4525
%% Include LaTeX hack for completeness -- never know
4527
%% \catcode`|=0 \catcode`[=1
4528
%% \catcode`]=2\catcode`\{=12\catcode`\}=12\catcode`\ =\active
4529
%% \catcode`\\=12|gdef|doverbatim#1@end verbatim[
4530
%% #1|endgroup|def|Everbatim[]|end[verbatim]]
4534
\gdef\doverbatim#1@end verbatim{#1\end{verbatim}}
4538
\def\Everbatim{\nonfillfinish\endgroup}%
4541
\advance\leftskip by -\defbodyindent
4542
\begingroup\setupverbatim\doverbatim
4545
% @verbatiminclude FILE - insert text of file in verbatim environment.
4547
% Allow normal characters that we make active in the argument (a file name).
4548
\def\verbatiminclude{%
4558
\parsearg\doverbatiminclude
4560
\def\setupverbatiminclude{%
4563
\advance\leftskip by -\defbodyindent
4564
\begingroup\setupverbatim
4567
\def\doverbatiminclude#1{%
4568
% Restore active chars for included file.
4572
\expandafter\expandafter\setupverbatiminclude\input\thisfile
4573
\endgroup\nonfillfinish\endgroup
4580
% Allow user to change definition object font (\df) internally
4581
\def\setdeffont #1 {\csname DEF#1\endcsname}
4583
\newskip\defbodyindent \defbodyindent=.4in
4584
\newskip\defargsindent \defargsindent=50pt
4585
\newskip\deftypemargin \deftypemargin=12pt
4586
\newskip\deflastargmargin \deflastargmargin=18pt
4588
\newcount\parencount
4589
% define \functionparens, which makes ( and ) and & do special things.
4590
% \functionparens affects the group it is contained in.
4592
\catcode`\(=\active \catcode`\)=\active \catcode`\&=\active
4593
\catcode`\[=\active \catcode`\]=\active}
4595
% Make control sequences which act like normal parenthesis chars.
4596
\let\lparen = ( \let\rparen = )
4598
{\activeparens % Now, smart parens don't turn on until &foo (see \amprm)
4600
% Be sure that we always have a definition for `(', etc. For example,
4601
% if the fn name has parens in it, \boldbrax will not be in effect yet,
4602
% so TeX would otherwise complain about undefined control sequence.
4603
\global\let(=\lparen \global\let)=\rparen
4604
\global\let[=\lbrack \global\let]=\rbrack
4606
\gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 }
4607
\gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
4608
% This is used to turn on special parens
4609
% but make & act ordinary (given that it's active).
4610
\gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr}
4612
% Definitions of (, ) and & used in args for functions.
4613
% This is the definition of ( outside of all parentheses.
4614
\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested
4615
\global\advance\parencount by 1
4618
% This is the definition of ( when already inside a level of parens.
4619
\gdef\opnested{\char`\(\global\advance\parencount by 1 }
4621
\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0.
4622
% also in that case restore the outer-level definition of (.
4623
\ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
4624
\global\advance \parencount by -1 }
4625
% If we encounter &foo, then turn on ()-hacking afterwards
4626
\gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ }
4628
\gdef\normalparens{\boldbrax\let&=\ampnr}
4629
} % End of definition inside \activeparens
4630
%% These parens (in \boldbrax) actually are a little bolder than the
4631
%% contained text. This is especially needed for [ and ]
4632
\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 }
4633
\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 }
4635
\def\lbrb{{\bf\char`\[}}
4636
\def\rbrb{{\bf\char`\]}}
4638
% Active &'s sneak into the index arguments, so make sure it's defined.
4641
\global\let& = \ampnr
4644
% First, defname, which formats the header line itself.
4645
% #1 should be the function name.
4646
% #2 should be the type of definition, such as "Function".
4649
% Get the values of \leftskip and \rightskip as they were
4650
% outside the @def...
4652
\advance\dimen2 by -\defbodyindent
4654
\setbox0=\hbox{\hskip \deflastargmargin{\rm #2}\hskip \deftypemargin}%
4655
\dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line
4656
\dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations
4657
\parshape 2 0in \dimen0 \defargsindent \dimen1
4658
% Now output arg 2 ("Function" or some such)
4659
% ending at \deftypemargin from the right margin,
4660
% but stuck inside a box of width 0 so it does not interfere with linebreaking
4661
{% Adjust \hsize to exclude the ambient margins,
4662
% so that \rightline will obey them.
4663
\advance \hsize by -\dimen2
4664
\rlap{\rightline{{\rm #2}\hskip -1.25pc }}}%
4665
% Make all lines underfull and no complaints:
4666
\tolerance=10000 \hbadness=10000
4667
\advance\leftskip by -\defbodyindent
4668
\exdentamount=\defbodyindent
4669
{\df #1}\enskip % Generate function name
4672
% Actually process the body of a definition
4673
% #1 should be the terminating control sequence, such as \Edefun.
4674
% #2 should be the "another name" control sequence, such as \defunx.
4675
% #3 should be the control sequence that actually processes the header,
4676
% such as \defunheader.
4678
\def\defparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody
4680
% Define the end token that this defining construct specifies
4681
% so that it will exit this group.
4682
\def#1{\endgraf\endgroup\medbreak}%
4683
\def#2{\begingroup\obeylines\activeparens\spacesplit#3}%
4685
\advance\leftskip by \defbodyindent
4686
\exdentamount=\defbodyindent
4688
\catcode 61=\active % 61 is `='
4689
\obeylines\activeparens\spacesplit#3}
4691
% #1 is the \E... control sequence to end the definition (which we define).
4692
% #2 is the \...x control sequence for consecutive fns (which we define).
4693
% #3 is the control sequence to call to resume processing.
4694
% #4, delimited by the space, is the class name.
4696
\def\defmethparsebody#1#2#3#4 {\begingroup\inENV %
4698
% Define the end token that this defining construct specifies
4699
% so that it will exit this group.
4700
\def#1{\endgraf\endgroup\medbreak}%
4701
\def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}%
4703
\advance\leftskip by \defbodyindent
4704
\exdentamount=\defbodyindent
4705
\begingroup\obeylines\activeparens\spacesplit{#3{#4}}}
4707
% Used for @deftypemethod and @deftypeivar.
4708
% #1 is the \E... control sequence to end the definition (which we define).
4709
% #2 is the \...x control sequence for consecutive fns (which we define).
4710
% #3 is the control sequence to call to resume processing.
4711
% #4, delimited by a space, is the class name.
4712
% #5 is the method's return type.
4714
\def\deftypemethparsebody#1#2#3#4 #5 {\begingroup\inENV
4716
\def#1{\endgraf\endgroup\medbreak}%
4717
\def#2##1 ##2 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}{##2}}}%
4719
\advance\leftskip by \defbodyindent
4720
\exdentamount=\defbodyindent
4721
\begingroup\obeylines\activeparens\spacesplit{#3{#4}{#5}}}
4723
% Used for @deftypeop. The change from \deftypemethparsebody is an
4724
% extra argument at the beginning which is the `category', instead of it
4725
% being the hardwired string `Method' or `Instance Variable'. We have
4726
% to account for this both in the \...x definition and in parsing the
4727
% input at hand. Thus also need a control sequence (passed as #5) for
4728
% the \E... definition to assign the category name to.
4730
\def\deftypeopparsebody#1#2#3#4#5 #6 {\begingroup\inENV
4732
\def#1{\endgraf\endgroup\medbreak}%
4733
\def#2##1 ##2 ##3 {%
4735
\begingroup\obeylines\activeparens\spacesplit{#3{##2}{##3}}}%
4737
\advance\leftskip by \defbodyindent
4738
\exdentamount=\defbodyindent
4739
\begingroup\obeylines\activeparens\spacesplit{#3{#5}{#6}}}
4741
\def\defopparsebody #1#2#3#4#5 {\begingroup\inENV %
4743
% Define the end token that this defining construct specifies
4744
% so that it will exit this group.
4745
\def#1{\endgraf\endgroup\medbreak}%
4746
\def#2##1 ##2 {\def#4{##1}%
4747
\begingroup\obeylines\activeparens\spacesplit{#3{##2}}}%
4749
\advance\leftskip by \defbodyindent
4750
\exdentamount=\defbodyindent
4751
\begingroup\obeylines\activeparens\spacesplit{#3{#5}}}
4753
% These parsing functions are similar to the preceding ones
4754
% except that they do not make parens into active characters.
4755
% These are used for "variables" since they have no arguments.
4757
\def\defvarparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody
4759
% Define the end token that this defining construct specifies
4760
% so that it will exit this group.
4761
\def#1{\endgraf\endgroup\medbreak}%
4762
\def#2{\begingroup\obeylines\spacesplit#3}%
4764
\advance\leftskip by \defbodyindent
4765
\exdentamount=\defbodyindent
4767
\catcode 61=\active %
4768
\obeylines\spacesplit#3}
4770
% This is used for \def{tp,vr}parsebody. It could probably be used for
4771
% some of the others, too, with some judicious conditionals.
4773
\def\parsebodycommon#1#2#3{%
4776
% Define the end token that this defining construct specifies
4777
% so that it will exit this group.
4778
\def#1{\endgraf\endgroup\medbreak}%
4779
\def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}%
4781
\advance\leftskip by \defbodyindent
4782
\exdentamount=\defbodyindent
4783
\begingroup\obeylines
4786
\def\defvrparsebody#1#2#3#4 {%
4787
\parsebodycommon{#1}{#2}{#3}%
4788
\spacesplit{#3{#4}}%
4791
% This loses on `@deftp {Data Type} {struct termios}' -- it thinks the
4792
% type is just `struct', because we lose the braces in `{struct
4793
% termios}' when \spacesplit reads its undelimited argument. Sigh.
4794
% \let\deftpparsebody=\defvrparsebody
4796
% So, to get around this, we put \empty in with the type name. That
4797
% way, TeX won't find exactly `{...}' as an undelimited argument, and
4798
% won't strip off the braces.
4800
\def\deftpparsebody #1#2#3#4 {%
4801
\parsebodycommon{#1}{#2}{#3}%
4802
\spacesplit{\parsetpheaderline{#3{#4}}}\empty
4805
% Fine, but then we have to eventually remove the \empty *and* the
4806
% braces (if any). That's what this does.
4808
\def\removeemptybraces\empty#1\relax{#1}
4810
% After \spacesplit has done its work, this is called -- #1 is the final
4811
% thing to call, #2 the type name (which starts with \empty), and #3
4812
% (which might be empty) the arguments.
4814
\def\parsetpheaderline#1#2#3{%
4815
#1{\removeemptybraces#2\relax}{#3}%
4818
\def\defopvarparsebody #1#2#3#4#5 {\begingroup\inENV %
4820
% Define the end token that this defining construct specifies
4821
% so that it will exit this group.
4822
\def#1{\endgraf\endgroup\medbreak}%
4823
\def#2##1 ##2 {\def#4{##1}%
4824
\begingroup\obeylines\spacesplit{#3{##2}}}%
4826
\advance\leftskip by \defbodyindent
4827
\exdentamount=\defbodyindent
4828
\begingroup\obeylines\spacesplit{#3{#5}}}
4830
% Split up #2 at the first space token.
4831
% call #1 with two arguments:
4832
% the first is all of #2 before the space token,
4833
% the second is all of #2 after that space token.
4834
% If #2 contains no space token, all of it is passed as the first arg
4835
% and the second is passed as empty.
4838
\gdef\spacesplit#1#2^^M{\endgroup\spacesplitfoo{#1}#2 \relax\spacesplitfoo}%
4839
\long\gdef\spacesplitfoo#1#2 #3#4\spacesplitfoo{%
4841
#1{#2}{}\else #1{#2}{#3#4}\fi}}
4843
% So much for the things common to all kinds of definitions.
4847
% First, define the processing that is wanted for arguments of \defun
4848
% Use this to expand the args and terminate the paragraph they make up
4850
\def\defunargs#1{\functionparens \sl
4851
% Expand, preventing hyphenation at `-' chars.
4852
% Note that groups don't affect changes in \hyphenchar.
4853
% Set the font temporarily and use \font in case \setfont made \tensl a macro.
4854
{\tensl\hyphenchar\font=0}%
4856
{\tensl\hyphenchar\font=45}%
4857
\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi%
4858
\interlinepenalty=10000
4859
\advance\rightskip by 0pt plus 1fil
4860
\endgraf\nobreak\vskip -\parskip\nobreak
4863
\def\deftypefunargs #1{%
4864
% Expand, preventing hyphenation at `-' chars.
4865
% Note that groups don't affect changes in \hyphenchar.
4866
% Use \boldbraxnoamp, not \functionparens, so that & is not special.
4868
\tclose{#1}% avoid \code because of side effects on active chars
4869
\interlinepenalty=10000
4870
\advance\rightskip by 0pt plus 1fil
4871
\endgraf\nobreak\vskip -\parskip\nobreak
4874
% Do complete processing of one @defun or @defunx line already parsed.
4876
% @deffn Command forward-char nchars
4878
\def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader}
4880
\def\deffnheader #1#2#3{\doind {fn}{\code{#2}}%
4881
\begingroup\defname {#2}{#1}\defunargs{#3}\endgroup %
4882
\catcode 61=\other % Turn off change made in \defparsebody
4885
% @defun == @deffn Function
4887
\def\defun{\defparsebody\Edefun\defunx\defunheader}
4889
\def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
4890
\begingroup\defname {#1}{\putwordDeffunc}%
4891
\defunargs {#2}\endgroup %
4892
\catcode 61=\other % Turn off change made in \defparsebody
4895
% @deftypefun int foobar (int @var{foo}, float @var{bar})
4897
\def\deftypefun{\defparsebody\Edeftypefun\deftypefunx\deftypefunheader}
4899
% #1 is the data type. #2 is the name and args.
4900
\def\deftypefunheader #1#2{\deftypefunheaderx{#1}#2 \relax}
4901
% #1 is the data type, #2 the name, #3 the args.
4902
\def\deftypefunheaderx #1#2 #3\relax{%
4903
\doind {fn}{\code{#2}}% Make entry in function index
4904
\begingroup\defname {\defheaderxcond#1\relax$$$#2}{\putwordDeftypefun}%
4905
\deftypefunargs {#3}\endgroup %
4906
\catcode 61=\other % Turn off change made in \defparsebody
4909
% @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar})
4911
\def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader}
4913
% \defheaderxcond#1\relax$$$
4914
% puts #1 in @code, followed by a space, but does nothing if #1 is null.
4915
\def\defheaderxcond#1#2$$${\ifx#1\relax\else\code{#1#2} \fi}
4917
% #1 is the classification. #2 is the data type. #3 is the name and args.
4918
\def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax}
4919
% #1 is the classification, #2 the data type, #3 the name, #4 the args.
4920
\def\deftypefnheaderx #1#2#3 #4\relax{%
4921
\doind {fn}{\code{#3}}% Make entry in function index
4923
\normalparens % notably, turn off `&' magic, which prevents
4924
% at least some C++ text from working
4925
\defname {\defheaderxcond#2\relax$$$#3}{#1}%
4926
\deftypefunargs {#4}\endgroup %
4927
\catcode 61=\other % Turn off change made in \defparsebody
4930
% @defmac == @deffn Macro
4932
\def\defmac{\defparsebody\Edefmac\defmacx\defmacheader}
4934
\def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
4935
\begingroup\defname {#1}{\putwordDefmac}%
4936
\defunargs {#2}\endgroup %
4937
\catcode 61=\other % Turn off change made in \defparsebody
4940
% @defspec == @deffn Special Form
4942
\def\defspec{\defparsebody\Edefspec\defspecx\defspecheader}
4944
\def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
4945
\begingroup\defname {#1}{\putwordDefspec}%
4946
\defunargs {#2}\endgroup %
4947
\catcode 61=\other % Turn off change made in \defparsebody
4950
% @defop CATEGORY CLASS OPERATION ARG...
4952
\def\defop #1 {\def\defoptype{#1}%
4953
\defopparsebody\Edefop\defopx\defopheader\defoptype}
4955
\def\defopheader#1#2#3{%
4956
\dosubind {fn}{\code{#2}}{\putwordon\ #1}% Make entry in function index
4957
\begingroup\defname {#2}{\defoptype\ \putwordon\ #1}%
4958
\defunargs {#3}\endgroup %
4961
% @deftypeop CATEGORY CLASS TYPE OPERATION ARG...
4963
\def\deftypeop #1 {\def\deftypeopcategory{#1}%
4964
\deftypeopparsebody\Edeftypeop\deftypeopx\deftypeopheader
4967
% #1 is the class name, #2 the data type, #3 the operation name, #4 the args.
4968
\def\deftypeopheader#1#2#3#4{%
4969
\dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
4971
\defname{\defheaderxcond#2\relax$$$#3}
4972
{\deftypeopcategory\ \putwordon\ \code{#1}}%
4973
\deftypefunargs{#4}%
4977
% @deftypemethod CLASS TYPE METHOD ARG...
4979
\def\deftypemethod{%
4980
\deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
4982
% #1 is the class name, #2 the data type, #3 the method name, #4 the args.
4983
\def\deftypemethodheader#1#2#3#4{%
4984
\dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
4986
\defname{\defheaderxcond#2\relax$$$#3}{\putwordMethodon\ \code{#1}}%
4987
\deftypefunargs{#4}%
4991
% @deftypeivar CLASS TYPE VARNAME
4994
\deftypemethparsebody\Edeftypeivar\deftypeivarx\deftypeivarheader}
4996
% #1 is the class name, #2 the data type, #3 the variable name.
4997
\def\deftypeivarheader#1#2#3{%
4998
\dosubind{vr}{\code{#3}}{\putwordof\ \code{#1}}% entry in variable index
5000
\defname{\defheaderxcond#2\relax$$$#3}
5001
{\putwordInstanceVariableof\ \code{#1}}%
5006
% @defmethod == @defop Method
5008
\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
5010
% #1 is the class name, #2 the method name, #3 the args.
5011
\def\defmethodheader#1#2#3{%
5012
\dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% entry in function index
5014
\defname{#2}{\putwordMethodon\ \code{#1}}%
5019
% @defcv {Class Option} foo-class foo-flag
5021
\def\defcv #1 {\def\defcvtype{#1}%
5022
\defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype}
5024
\def\defcvarheader #1#2#3{%
5025
\dosubind {vr}{\code{#2}}{\putwordof\ #1}% Make entry in var index
5026
\begingroup\defname {#2}{\defcvtype\ \putwordof\ #1}%
5027
\defvarargs {#3}\endgroup %
5030
% @defivar CLASS VARNAME == @defcv {Instance Variable} CLASS VARNAME
5032
\def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader}
5034
\def\defivarheader#1#2#3{%
5035
\dosubind {vr}{\code{#2}}{\putwordof\ #1}% entry in var index
5037
\defname{#2}{\putwordInstanceVariableof\ #1}%
5043
% First, define the processing that is wanted for arguments of @defvar.
5044
% This is actually simple: just print them in roman.
5045
% This must expand the args and terminate the paragraph they make up
5046
\def\defvarargs #1{\normalparens #1%
5047
\interlinepenalty=10000
5048
\endgraf\nobreak\vskip -\parskip\nobreak}
5050
% @defvr Counter foo-count
5052
\def\defvr{\defvrparsebody\Edefvr\defvrx\defvrheader}
5054
\def\defvrheader #1#2#3{\doind {vr}{\code{#2}}%
5055
\begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup}
5057
% @defvar == @defvr Variable
5059
\def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader}
5061
\def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
5062
\begingroup\defname {#1}{\putwordDefvar}%
5063
\defvarargs {#2}\endgroup %
5066
% @defopt == @defvr {User Option}
5068
\def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader}
5070
\def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
5071
\begingroup\defname {#1}{\putwordDefopt}%
5072
\defvarargs {#2}\endgroup %
5075
% @deftypevar int foobar
5077
\def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader}
5079
% #1 is the data type. #2 is the name, perhaps followed by text that
5080
% is actually part of the data type, which should not be put into the index.
5081
\def\deftypevarheader #1#2{%
5082
\dovarind#2 \relax% Make entry in variables index
5083
\begingroup\defname {\defheaderxcond#1\relax$$$#2}{\putwordDeftypevar}%
5084
\interlinepenalty=10000
5085
\endgraf\nobreak\vskip -\parskip\nobreak
5087
\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}}
5089
% @deftypevr {Global Flag} int enable
5091
\def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader}
5093
\def\deftypevrheader #1#2#3{\dovarind#3 \relax%
5094
\begingroup\defname {\defheaderxcond#2\relax$$$#3}{#1}
5095
\interlinepenalty=10000
5096
\endgraf\nobreak\vskip -\parskip\nobreak
5100
% Args are printed in bold, a slight difference from @defvar.
5102
\def\deftpargs #1{\bf \defvarargs{#1}}
5104
% @deftp Class window height width ...
5106
\def\deftp{\deftpparsebody\Edeftp\deftpx\deftpheader}
5108
\def\deftpheader #1#2#3{\doind {tp}{\code{#2}}%
5109
\begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup}
5111
% These definitions are used if you use @defunx (etc.)
5112
% anywhere other than immediately after a @defun or @defunx.
5114
\def\defcvx#1 {\errmessage{@defcvx in invalid context}}
5115
\def\deffnx#1 {\errmessage{@deffnx in invalid context}}
5116
\def\defivarx#1 {\errmessage{@defivarx in invalid context}}
5117
\def\defmacx#1 {\errmessage{@defmacx in invalid context}}
5118
\def\defmethodx#1 {\errmessage{@defmethodx in invalid context}}
5119
\def\defoptx #1 {\errmessage{@defoptx in invalid context}}
5120
\def\defopx#1 {\errmessage{@defopx in invalid context}}
5121
\def\defspecx#1 {\errmessage{@defspecx in invalid context}}
5122
\def\deftpx#1 {\errmessage{@deftpx in invalid context}}
5123
\def\deftypefnx#1 {\errmessage{@deftypefnx in invalid context}}
5124
\def\deftypefunx#1 {\errmessage{@deftypefunx in invalid context}}
5125
\def\deftypeivarx#1 {\errmessage{@deftypeivarx in invalid context}}
5126
\def\deftypemethodx#1 {\errmessage{@deftypemethodx in invalid context}}
5127
\def\deftypeopx#1 {\errmessage{@deftypeopx in invalid context}}
5128
\def\deftypevarx#1 {\errmessage{@deftypevarx in invalid context}}
5129
\def\deftypevrx#1 {\errmessage{@deftypevrx in invalid context}}
5130
\def\defunx#1 {\errmessage{@defunx in invalid context}}
5131
\def\defvarx#1 {\errmessage{@defvarx in invalid context}}
5132
\def\defvrx#1 {\errmessage{@defvrx in invalid context}}
5138
% To do this right we need a feature of e-TeX, \scantokens,
5139
% which we arrange to emulate with a temporary file in ordinary TeX.
5140
\ifx\eTeXversion\undefined
5141
\newwrite\macscribble
5143
\begingroup \newlinechar`\^^M
5144
% Undo catcode changes of \startcontents and \doprintindex
5145
\catcode`\@=0 \catcode`\\=12 \escapechar=`\@
5146
% Append \endinput to make sure that TeX does not see the ending newline.
5147
\toks0={#1\endinput}%
5148
\immediate\openout\macscribble=\jobname.tmp
5149
\immediate\write\macscribble{\the\toks0}%
5150
\immediate\closeout\macscribble
5151
\let\xeatspaces\eatspaces
5157
\begingroup \newlinechar`\^^M
5158
% Undo catcode changes of \startcontents and \doprintindex
5159
\catcode`\@=0 \catcode`\\=12 \escapechar=`\@
5160
\let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup}
5163
\newcount\paramno % Count of parameters
5164
\newtoks\macname % Macro name
5165
\newif\ifrecursive % Is it recursive?
5166
\def\macrolist{} % List of all defined macros in the form
5167
% \do\macro1\do\macro2...
5170
% Thisdoes \let #1 = #2, except with \csnames.
5172
\expandafter\expandafter
5174
\expandafter\expandafter
5176
\csname#2\endcsname}
5178
% Trim leading and trailing spaces off a string.
5179
% Concepts from aro-bend problem 15 (see CTAN).
5181
\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
5182
\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
5183
\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
5185
\unbrace{\gdef\trim@@@ #1 } #2@{#1}
5188
% Trim a single trailing ^^M off a string.
5189
{\catcode`\^^M=12\catcode`\Q=3%
5190
\gdef\eatcr #1{\eatcra #1Q^^MQ}%
5191
\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
5192
\gdef\eatcrb#1Q#2Q{#1}%
5195
% Macro bodies are absorbed as an argument in a context where
5196
% all characters are catcode 10, 11 or 12, except \ which is active
5197
% (as in normal texinfo). It is necessary to change the definition of \.
5199
% It's necessary to have hard CRs when the macro is executed. This is
5200
% done by making ^^M (\endlinechar) catcode 12 when reading the macro
5201
% body, and then making it the \newlinechar in \scanmacro.
5203
\def\macrobodyctxt{%
5228
% \mbodybackslash is the definition of \ in @macro bodies.
5229
% It maps \foo\ => \csname macarg.foo\endcsname => #N
5230
% where N is the macro parameter number.
5231
% We define \csname macarg.\endcsname to be \realbackslash, so
5232
% \\ in macro replacement text gets you a backslash.
5234
{\catcode`@=0 @catcode`@\=@active
5235
@gdef@usembodybackslash{@let\=@mbodybackslash}
5236
@gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
5238
\expandafter\def\csname macarg.\endcsname{\realbackslash}
5240
\def\macro{\recursivefalse\parsearg\macroxxx}
5241
\def\rmacro{\recursivetrue\parsearg\macroxxx}
5244
\getargs{#1}% now \macname is the macname and \argl the arglist
5245
\ifx\argl\empty % no arguments
5248
\expandafter\parsemargdef \argl;%
5250
\if1\csname ismacro.\the\macname\endcsname
5251
\message{Warning: redefining \the\macname}%
5253
\expandafter\ifx\csname \the\macname\endcsname \relax
5254
\else \errmessage{The name \the\macname\space is reserved}\fi
5255
\global\cslet{macsave.\the\macname}{\the\macname}%
5256
\global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
5257
% Add the macroname to \macrolist
5258
\toks0 = \expandafter{\macrolist\do}%
5259
\xdef\macrolist{\the\toks0
5260
\expandafter\noexpand\csname\the\macname\endcsname}%
5262
\begingroup \macrobodyctxt
5263
\ifrecursive \expandafter\parsermacbody
5264
\else \expandafter\parsemacbody
5267
\def\unmacro{\parsearg\unmacroxxx}
5269
\if1\csname ismacro.#1\endcsname
5270
\global\cslet{#1}{macsave.#1}%
5271
\global\expandafter\let \csname ismacro.#1\endcsname=0%
5272
% Remove the macro name from \macrolist
5274
\edef\tempa{\expandafter\noexpand\csname#1\endcsname}%
5280
\toks0 = \expandafter{\newmacrolist\do}%
5281
\edef\newmacrolist{\the\toks0\expandafter\noexpand\tempa}%
5283
\def\newmacrolist{}%
5284
% Execute macro list to define \newmacrolist
5286
\global\let\macrolist\newmacrolist
5289
\errmessage{Macro #1 not defined}%
5293
% This makes use of the obscure feature that if the last token of a
5294
% <parameter list> is #, then the preceding argument is delimited by
5295
% an opening brace, and that opening brace is not consumed.
5296
\def\getargs#1{\getargsxxx#1{}}
5297
\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
5298
\def\getmacname #1 #2\relax{\macname={#1}}
5299
\def\getmacargs#1{\def\argl{#1}}
5301
% Parse the optional {params} list. Set up \paramno and \paramlist
5302
% so \defmacro knows what to do. Define \macarg.blah for each blah
5303
% in the params list, to be ##N where N is the position in that list.
5304
% That gets used by \mbodybackslash (above).
5306
% We need to get `macro parameter char #' into several definitions.
5307
% The technique used is stolen from LaTeX: let \hash be something
5308
% unexpandable, insert that wherever you need a #, and then redefine
5309
% it to # just before using the token list produced.
5311
% The same technique is used to protect \eatspaces till just before
5312
% the macro is used.
5314
\def\parsemargdef#1;{\paramno=0\def\paramlist{}%
5315
\let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,}
5316
\def\parsemargdefxxx#1,{%
5317
\if#1;\let\next=\relax
5318
\else \let\next=\parsemargdefxxx
5319
\advance\paramno by 1%
5320
\expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
5321
{\xeatspaces{\hash\the\paramno}}%
5322
\edef\paramlist{\paramlist\hash\the\paramno,}%
5325
% These two commands read recursive and nonrecursive macro bodies.
5326
% (They're different since rec and nonrec macros end differently.)
5328
\long\def\parsemacbody#1@end macro%
5329
{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
5330
\long\def\parsermacbody#1@end rmacro%
5331
{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
5333
% This defines the macro itself. There are six cases: recursive and
5334
% nonrecursive macros of zero, one, and many arguments.
5335
% Much magic with \expandafter here.
5336
% \xdef is used so that macro definitions will survive the file
5337
% they're defined in; @include reads the file inside a group.
5339
\let\hash=##% convert placeholders to macro parameter chars
5343
\expandafter\xdef\csname\the\macname\endcsname{%
5344
\noexpand\scanmacro{\temp}}%
5346
\expandafter\xdef\csname\the\macname\endcsname{%
5347
\bgroup\noexpand\macroargctxt
5348
\noexpand\braceorline
5349
\expandafter\noexpand\csname\the\macname xxx\endcsname}%
5350
\expandafter\xdef\csname\the\macname xxx\endcsname##1{%
5351
\egroup\noexpand\scanmacro{\temp}}%
5353
\expandafter\xdef\csname\the\macname\endcsname{%
5354
\bgroup\noexpand\macroargctxt
5355
\noexpand\csname\the\macname xx\endcsname}%
5356
\expandafter\xdef\csname\the\macname xx\endcsname##1{%
5357
\expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
5358
\expandafter\expandafter
5360
\expandafter\expandafter
5361
\csname\the\macname xxx\endcsname
5362
\paramlist{\egroup\noexpand\scanmacro{\temp}}%
5367
\expandafter\xdef\csname\the\macname\endcsname{%
5368
\noexpand\norecurse{\the\macname}%
5369
\noexpand\scanmacro{\temp}\egroup}%
5371
\expandafter\xdef\csname\the\macname\endcsname{%
5372
\bgroup\noexpand\macroargctxt
5373
\noexpand\braceorline
5374
\expandafter\noexpand\csname\the\macname xxx\endcsname}%
5375
\expandafter\xdef\csname\the\macname xxx\endcsname##1{%
5377
\noexpand\norecurse{\the\macname}%
5378
\noexpand\scanmacro{\temp}\egroup}%
5380
\expandafter\xdef\csname\the\macname\endcsname{%
5381
\bgroup\noexpand\macroargctxt
5382
\expandafter\noexpand\csname\the\macname xx\endcsname}%
5383
\expandafter\xdef\csname\the\macname xx\endcsname##1{%
5384
\expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
5385
\expandafter\expandafter
5387
\expandafter\expandafter
5388
\csname\the\macname xxx\endcsname
5391
\noexpand\norecurse{\the\macname}%
5392
\noexpand\scanmacro{\temp}\egroup}%
5396
\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
5398
% \braceorline decides whether the next nonwhitespace character is a
5399
% {. If so it reads up to the closing }, if not, it reads the whole
5400
% line. Whatever was read is then fed to the next control sequence
5401
% as an argument (by \parsebrace or \parsearg)
5402
\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
5403
\def\braceorlinexxx{%
5404
\ifx\nchar\bgroup\else
5405
\expandafter\parsearg
5408
% We mant to disable all macros during \shipout so that they are not
5409
% expanded by \write.
5410
\def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}%
5411
\edef\next{\macrolist}\expandafter\endgroup\next}
5415
% We need some trickery to remove the optional spaces around the equal
5416
% sign. Just make them active and then expand them all to nothing.
5417
\def\alias{\begingroup\obeyspaces\parsearg\aliasxxx}
5418
\def\aliasxxx #1{\aliasyyy#1\relax}
5419
\def\aliasyyy #1=#2\relax{\ignoreactivespaces
5420
\edef\next{\global\let\expandafter\noexpand\csname#1\endcsname=%
5421
\expandafter\noexpand\csname#2\endcsname}%
5422
\expandafter\endgroup\next}
5425
\message{cross references,}
5430
\newif\ifhavexrefs % True if xref values are known.
5431
\newif\ifwarnedxrefs % True if we warned once that they aren't known.
5433
% @inforef is relatively simple.
5434
\def\inforef #1{\inforefzzz #1,,,,**}
5435
\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
5436
node \samp{\ignorespaces#1{}}}
5438
% @node's job is to define \lastnode.
5439
\def\node{\ENVcheck\parsearg\nodezzz}
5440
\def\nodezzz#1{\nodexxx [#1,]}
5441
\def\nodexxx[#1,#2]{\gdef\lastnode{#1}}
5443
\let\lastnode=\relax
5445
% The sectioning commands (@chapter, etc.) call these.
5447
\ifx\lastnode\relax\else
5448
\expandafter\expandafter\expandafter\setref{\lastnode}%
5449
{Ysectionnumberandtype}%
5450
\global\let\lastnode=\relax
5453
\def\unnumbnoderef{%
5454
\ifx\lastnode\relax\else
5455
\expandafter\expandafter\expandafter\setref{\lastnode}{Ynothing}%
5456
\global\let\lastnode=\relax
5459
\def\appendixnoderef{%
5460
\ifx\lastnode\relax\else
5461
\expandafter\expandafter\expandafter\setref{\lastnode}%
5462
{Yappendixletterandtype}%
5463
\global\let\lastnode=\relax
5468
% @anchor{NAME} -- define xref target at arbitrary point.
5470
\newcount\savesfregister
5471
\gdef\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
5472
\gdef\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
5473
\gdef\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
5475
% \setref{NAME}{SNT} defines a cross-reference point NAME, namely
5476
% NAME-title, NAME-pg, and NAME-SNT. Called from \foonoderef. We have
5477
% to set \indexdummies so commands such as @code in a section title
5478
% aren't expanded. It would be nicer not to expand the titles in the
5479
% first place, but there's so many layers that that is hard to do.
5484
\dosetq{#1-title}{Ytitle}%
5485
\dosetq{#1-pg}{Ypagenumber}%
5486
\dosetq{#1-snt}{#2}%
5489
% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
5490
% the node name, #2 the name of the Info cross-reference, #3 the printed
5491
% node name, #4 the name of the Info file, #5 the name of the printed
5492
% manual. All but the node name can be omitted.
5494
\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
5495
\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
5496
\def\ref#1{\xrefX[#1,,,,,,,]}
5497
\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
5499
\def\printedmanual{\ignorespaces #5}%
5500
\def\printednodename{\ignorespaces #3}%
5501
\setbox1=\hbox{\printedmanual}%
5502
\setbox0=\hbox{\printednodename}%
5504
% No printed node name was explicitly given.
5505
\expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
5506
% Use the node name inside the square brackets.
5507
\def\printednodename{\ignorespaces #1}%
5509
% Use the actual chapter/section title appear inside
5510
% the square brackets. Use the real section title if we have it.
5512
% It is in another manual, so we don't have it.
5513
\def\printednodename{\ignorespaces #1}%
5516
% We know the real title if we have the xref values.
5517
\def\printednodename{\refx{#1-title}{}}%
5519
% Otherwise just copy the Info node name.
5520
\def\printednodename{\ignorespaces #1}%
5526
% If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
5527
% insert empty discretionaries after hyphens, which means that it will
5528
% not find a line break at a hyphen in a node names. Since some manuals
5529
% are best written with fairly long node names, containing hyphens, this
5530
% is a loss. Therefore, we give the text of the node name again, so it
5531
% is as if TeX is seeing it for the first time.
5535
{\normalturnoffactive
5536
\ifnum\filenamelength>0
5537
\startlink attr{/Border [0 0 0]}%
5538
goto file{\the\filename.pdf} name{#1}%
5540
\startlink attr{/Border [0 0 0]}%
5548
\putwordsection{} ``\printednodename'' \putwordin{} \cite{\printedmanual}%
5550
% _ (for example) has to be the character _ for the purposes of the
5551
% control sequence corresponding to the node, but it has to expand
5552
% into the usual \leavevmode...\vrule stuff for purposes of
5553
% printing. So we \turnoffactive for the \refx-snt, back on for the
5554
% printing, back off for the \refx-pg.
5555
{\normalturnoffactive
5556
% Only output a following space if the -snt ref is nonempty; for
5557
% @unnumbered and @anchor, it won't be.
5558
\setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
5559
\ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
5562
[\printednodename],\space
5564
\turnoffactive \putwordpage\tie\refx{#1-pg}{}%
5569
% \dosetq is the interface for calls from other macros
5571
% Use \normalturnoffactive so that punctuation chars such as underscore
5572
% and backslash work in node names. (\turnoffactive doesn't do \.)
5575
\normalturnoffactive
5576
\edef\next{\write\auxfile{\internalsetq{#1}{#2}}}%
5583
% \internalsetq {foo}{page} expands into
5584
% CHARACTERS 'xrdef {foo}{...expansion of \Ypage...}
5585
% When the aux file is read, ' is the escape character
5587
\def\internalsetq #1#2{'xrdef {#1}{\csname #2\endcsname}}
5589
% Things to be expanded by \internalsetq
5591
\def\Ypagenumber{\folio}
5593
\def\Ytitle{\thissection}
5597
\def\Ysectionnumberandtype{%
5598
\ifnum\secno=0 \putwordChapter\xreftie\the\chapno %
5599
\else \ifnum \subsecno=0 \putwordSection\xreftie\the\chapno.\the\secno %
5600
\else \ifnum \subsubsecno=0 %
5601
\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno %
5603
\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno %
5606
\def\Yappendixletterandtype{%
5607
\ifnum\secno=0 \putwordAppendix\xreftie'char\the\appendixno{}%
5608
\else \ifnum \subsecno=0 \putwordSection\xreftie'char\the\appendixno.\the\secno %
5609
\else \ifnum \subsubsecno=0 %
5610
\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno %
5612
\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno %
5617
% Use TeX 3.0's \inputlineno to get the line number, for better error
5618
% messages, but if we're using an old version of TeX, don't do anything.
5620
\ifx\inputlineno\thisisundefined
5621
\let\linenumber = \empty % Non-3.0.
5623
\def\linenumber{\the\inputlineno:\space}
5626
% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
5627
% If its value is nonempty, SUFFIX is output afterward.
5630
\expandafter\ifx\csname X#1\endcsname\relax
5631
% If not defined, say something at least.
5632
\angleleft un\-de\-fined\angleright
5635
\message{\linenumber Undefined cross reference `#1'.}%
5638
\global\warnedxrefstrue
5639
\message{Cross reference values unknown; you must run TeX again.}%
5644
% It's defined, so just use it.
5645
\csname X#1\endcsname
5647
#2% Output the suffix in any case.
5650
% This is the macro invoked by entries in the aux file.
5652
\def\xrdef#1{\begingroup
5653
% Reenable \ as an escape while reading the second argument.
5655
\afterassignment\endgroup
5656
\expandafter\gdef\csname X#1\endcsname
5659
% Read the last existing aux file, if any. No error if none exists.
5660
\def\readauxfile{\begingroup
5661
\catcode`\^^@=\other
5662
\catcode`\^^A=\other
5663
\catcode`\^^B=\other
5664
\catcode`\^^C=\other
5665
\catcode`\^^D=\other
5666
\catcode`\^^E=\other
5667
\catcode`\^^F=\other
5668
\catcode`\^^G=\other
5669
\catcode`\^^H=\other
5670
\catcode`\^^K=\other
5671
\catcode`\^^L=\other
5672
\catcode`\^^N=\other
5673
\catcode`\^^P=\other
5674
\catcode`\^^Q=\other
5675
\catcode`\^^R=\other
5676
\catcode`\^^S=\other
5677
\catcode`\^^T=\other
5678
\catcode`\^^U=\other
5679
\catcode`\^^V=\other
5680
\catcode`\^^W=\other
5681
\catcode`\^^X=\other
5682
\catcode`\^^Z=\other
5683
\catcode`\^^[=\other
5684
\catcode`\^^\=\other
5685
\catcode`\^^]=\other
5686
\catcode`\^^^=\other
5687
\catcode`\^^_=\other
5690
% It was suggested to define this as 7, which would allow ^^e4 etc.
5691
% in xref tags, i.e., node names. But since ^^e4 notation isn't
5692
% supported in the main text, it doesn't seem desirable. Furthermore,
5693
% that is not enough: for node names that actually contain a ^
5694
% character, we would end up writing a line like this: 'xrdef {'hat
5695
% b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
5696
% argument, and \hat is not an expandable control sequence. It could
5697
% all be worked out, but why? Either we support ^^ or we don't.
5699
% The other change necessary for this was to define \auxhat:
5700
% \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
5701
% and then to call \auxhat in \setq.
5714
\catcode`+=\other % avoid \+ for paranoia even though we've turned it off
5715
% Make the characters 128-255 be printing characters
5719
\catcode\count 1=\other
5720
\advance\count 1 by 1
5721
\ifnum \count 1<256 \loop \fi
5724
% The aux file uses ' as the escape (for now).
5725
% Turn off \ as an escape so we do not lose on
5726
% entries which were dumped with control sequences in their names.
5727
% For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^
5728
% Reference to such entries still does not work the way one would wish,
5729
% but at least they do not bomb out when the aux file is read in.
5736
\openin 1 \jobname.aux
5740
\global\havexrefstrue
5741
\global\warnedobstrue
5743
% Open the new aux file. TeX will close it automatically at exit.
5744
\openout\auxfile=\jobname.aux
5750
\newcount \footnoteno
5752
% The trailing space in the following definition for supereject is
5753
% vital for proper filling; pages come out unaligned when you do a
5754
% pagealignmacro call if that space before the closing brace is
5755
% removed. (Generally, numeric constants should always be followed by a
5756
% space to prevent strange expansion errors.)
5757
\def\supereject{\par\penalty -20000\footnoteno =0 }
5759
% @footnotestyle is meaningful for info output only.
5760
\let\footnotestyle=\comment
5762
\let\ptexfootnote=\footnote
5766
% Auto-number footnotes. Otherwise like plain.
5768
\global\advance\footnoteno by \@ne
5769
\edef\thisfootno{$^{\the\footnoteno}$}%
5771
% In case the footnote comes at the end of a sentence, preserve the
5772
% extra spacing after we do the footnote number.
5774
\ifhmode\edef\@sf{\spacefactor\the\spacefactor}\/\fi
5776
% Remove inadvertent blank space before typesetting the footnote number.
5782
% Don't bother with the trickery in plain.tex to not require the
5783
% footnote text as a parameter. Our footnotes don't need to be so general.
5785
% Oh yes, they do; otherwise, @ifset and anything else that uses
5786
% \parseargline fail inside footnotes because the tokens are fixed when
5787
% the footnote is read. --karl, 16nov96.
5789
\long\gdef\footnotezzz{\insert\footins\bgroup
5790
% We want to typeset this text as a normal paragraph, even if the
5791
% footnote reference occurs in (for example) a display environment.
5792
% So reset some parameters.
5793
\interlinepenalty\interfootnotelinepenalty
5794
\splittopskip\ht\strutbox % top baseline for broken footnotes
5795
\splitmaxdepth\dp\strutbox
5796
\floatingpenalty\@MM
5801
\parindent\defaultparindent
5805
% Hang the footnote text off the number.
5807
\textindent{\thisfootno}%
5809
% Don't crash into the line above the footnote text. Since this
5810
% expands into a box, it must come within the paragraph, lest it
5811
% provide a place where TeX can split the footnote.
5813
\futurelet\next\fo@t
5815
\def\fo@t{\ifcat\bgroup\noexpand\next \let\next\f@@t
5816
\else\let\next\f@t\fi \next}
5817
\def\f@@t{\bgroup\aftergroup\@foot\let\next}
5818
\def\f@t#1{#1\@foot}
5819
\def\@foot{\strut\par\egroup}
5821
}%end \catcode `\@=11
5823
% @| inserts a changebar to the left of the current line. It should
5824
% surround any changed text. This approach does *not* work if the
5825
% change spans more than two lines of output. To handle that, we would
5826
% have adopt a much more difficult approach (putting marks into the main
5827
% vertical list for the beginning and end of each change).
5830
% \vadjust can only be used in horizontal mode.
5833
% Append this vertical mode material after the current line in the output.
5835
% We want to insert a rule with the height and depth of the current
5836
% leading; that is exactly what \strutbox is supposed to record.
5837
\vskip-\baselineskip
5839
% \vadjust-items are inserted at the left edge of the type. So
5840
% the \llap here moves out into the left-hand margin.
5843
% For a thicker or thinner bar, change the `1pt'.
5844
\vrule height\baselineskip width1pt
5846
% This is the space between the bar and the text.
5852
% For a final copy, take out the rectangles
5853
% that mark overfull boxes (in case you have decided
5854
% that the text looks ok even though it passes the margin).
5856
\def\finalout{\overfullrule=0pt}
5858
% @image. We use the macros from epsf.tex to support this.
5859
% If epsf.tex is not installed and @image is used, we complain.
5861
% Check for and read epsf.tex up front. If we read it only at @image
5862
% time, we might be inside a group, and then its definitions would get
5863
% undone and the next image would fail.
5864
\openin 1 = epsf.tex
5867
% Do not bother showing banner with post-v2.7 epsf.tex (available in
5868
% doc/epsf.tex until it shows up on ctan).
5869
\def\epsfannounce{\toks0 = }%
5873
% We will only complain once about lack of epsf.tex.
5874
\newif\ifwarnednoepsf
5875
\newhelp\noepsfhelp{epsf.tex must be installed for images to
5876
work. It is also included in the Texinfo distribution, or you can get
5877
it from ftp://tug.org/tex/epsf.tex.}
5880
\ifx\epsfbox\undefined
5881
\ifwarnednoepsf \else
5882
\errhelp = \noepsfhelp
5883
\errmessage{epsf.tex not found, images will be ignored}%
5884
\global\warnednoepsftrue
5887
\imagexxx #1,,,\finish
5891
% Arguments to @image:
5892
% #1 is (mandatory) image filename; we tack on .eps extension.
5893
% #2 is (optional) width, #3 is (optional) height.
5894
% #4 is (ignored optional) html alt text.
5895
% #5 is (ignored optional) extension.
5896
% #6 is just the usual extra ignored arg for parsing this stuff.
5897
\def\imagexxx#1,#2,#3,#4,#5,#6\finish{%
5899
\centerline{\dopdfimage{#1}{#2}{#3}}%
5901
% \epsfbox itself resets \epsf?size at each figure.
5902
\setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
5903
\setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
5905
\catcode`\^^M = 5 % in case we're inside an example
5906
\normalturnoffactive % allow _ et al. in names
5907
% If the image is by itself, center it.
5910
% Usually we'll have text after the image which will insert
5911
% \parskip glue, so insert it here too to equalize the space
5913
\nobreak\vskip\parskip
5915
\centerline{\epsfbox{#1.eps}}%
5918
% In the middle of a paragraph, no extra space.
5926
\message{localization,}
5929
% @documentlanguage is usually given very early, just after
5930
% @setfilename. If done too late, it may not override everything
5931
% properly. Single argument is the language abbreviation.
5932
% It would be nice if we could set up a hyphenation file here.
5934
\def\documentlanguage{\parsearg\dodocumentlanguage}
5935
\def\dodocumentlanguage#1{%
5936
\tex % read txi-??.tex file in plain TeX.
5937
% Read the file if it exists.
5938
\openin 1 txi-#1.tex
5940
\errhelp = \nolanghelp
5941
\errmessage{Cannot read language file txi-#1.tex}%
5944
\def\temp{\input txi-#1.tex }%
5949
\newhelp\nolanghelp{The given language definition file cannot be found or
5950
is empty. Maybe you need to install it? In the current directory
5951
should work if nowhere else does.}
5954
% @documentencoding should change something in TeX eventually, most
5955
% likely, but for now just recognize it.
5956
\let\documentencoding = \comment
5959
% Page size parameters.
5961
\newdimen\defaultparindent \defaultparindent = 15pt
5963
\chapheadingskip = 15pt plus 4pt minus 2pt
5964
\secheadingskip = 12pt plus 3pt minus 2pt
5965
\subsecheadingskip = 9pt plus 2pt minus 2pt
5967
% Prevent underfull vbox error messages.
5970
% Don't be so finicky about underfull hboxes, either.
5973
% Following George Bush, just get rid of widows and orphans.
5977
% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
5978
% using an old version of TeX, don't do anything. We want the amount of
5979
% stretch added to depend on the line length, hence the dependence on
5980
% \hsize. We call this whenever the paper size is set.
5982
\def\setemergencystretch{%
5983
\ifx\emergencystretch\thisisundefined
5984
% Allow us to assign to \emergencystretch anyway.
5985
\def\emergencystretch{\dimen0}%
5987
\emergencystretch = .15\hsize
5991
% Parameters in order: 1) textheight; 2) textwidth; 3) voffset;
5992
% 4) hoffset; 5) binding offset; 6) topskip. We also call
5993
% \setleading{\textleading}, so the caller should define \textleading.
5994
% The caller should also set \parskip.
5996
\def\internalpagesizes#1#2#3#4#5#6{%
5999
\splittopskip = \topskip
6002
\advance\vsize by \topskip
6003
\outervsize = \vsize
6004
\advance\outervsize by 2\topandbottommargin
6005
\pageheight = \vsize
6008
\outerhsize = \hsize
6009
\advance\outerhsize by 0.5in
6012
\normaloffset = #4\relax
6013
\bindingoffset = #5\relax
6015
\setleading{\textleading}
6017
\parindent = \defaultparindent
6018
\setemergencystretch
6021
% Use `small' versions.
6023
\def\smallenvironments{%
6024
\let\smalldisplay = \smalldisplayx
6025
\let\smallexample = \smalllispx
6026
\let\smallformat = \smallformatx
6027
\let\smalllisp = \smalllispx
6030
% @letterpaper (the default).
6031
\def\letterpaper{{\globaldefs = 1
6032
\parskip = 3pt plus 2pt minus 1pt
6033
\textleading = 13.2pt
6035
% If page is nothing but text, make it come out even.
6036
\internalpagesizes{46\baselineskip}{6in}{\voffset}{.25in}{\bindingoffset}{36pt}%
6039
% Use @smallbook to reset parameters for 7x9.5 (or so) format.
6040
\def\smallbook{{\globaldefs = 1
6041
\parskip = 2pt plus 1pt
6044
\internalpagesizes{7.5in}{5.in}{\voffset}{.25in}{\bindingoffset}{16pt}%
6046
\lispnarrowing = 0.3in
6049
\contentsrightmargin = 0pt
6050
\deftypemargin = 0pt
6051
\defbodyindent = .5cm
6055
% Use @afourpaper to print on European A4 paper.
6056
\def\afourpaper{{\globaldefs = 1
6057
\parskip = 3pt plus 2pt minus 1pt
6060
\internalpagesizes{53\baselineskip}{160mm}{\voffset}{4mm}{\bindingoffset}{44pt}%
6066
% Use @afivepaper to print on European A5 paper.
6067
% From romildo@urano.iceb.ufop.br, 2 July 2000.
6068
% He also recommends making @example and @lisp be small.
6069
\def\afivepaper{{\globaldefs = 1
6070
\parskip = 2pt plus 1pt minus 0.1pt
6071
\textleading = 12.5pt
6073
\internalpagesizes{166mm}{120mm}{\voffset}{-8mm}{\bindingoffset}{8pt}%
6075
\lispnarrowing = 0.2in
6078
\contentsrightmargin = 0mm
6079
\deftypemargin = 0pt
6080
\defbodyindent = 2mm
6086
% A specific text layout, 24x15cm overall, intended for A4 paper. Top margin
6087
% 29mm, hence bottom margin 28mm, nominal side margin 3cm.
6088
\def\afourlatex{{\globaldefs = 1
6089
\textleading = 13.6pt
6092
\internalpagesizes{237mm}{150mm}{3.6mm}{3.6mm}{3mm}{7mm}%
6095
% Use @afourwide to print on European A4 paper in wide format.
6098
\internalpagesizes{6.5in}{9.5in}{\hoffset}{\normaloffset}{\bindingoffset}{7mm}%
6101
% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
6102
% Perhaps we should allow setting the margins, \topskip, \parskip,
6103
% and/or leading, also. Or perhaps we should compute them somehow.
6105
\def\pagesizes{\parsearg\pagesizesxxx}
6106
\def\pagesizesxxx#1{\pagesizesyyy #1,,\finish}
6107
\def\pagesizesyyy#1,#2,#3\finish{{%
6108
\setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
6111
\parskip = 3pt plus 2pt minus 1pt
6112
\setleading{\textleading}%
6114
\internalpagesizes{#1}{\hsize}{\voffset}{\normaloffset}{\bindingoffset}{44pt}%
6117
% Set default to letter.
6122
\message{and turning on texinfo input format.}
6124
% Define macros to output various characters with catcode for normal text.
6134
\def\normaldoublequote{"}
6137
\def\normalunderscore{_}
6138
\def\normalverticalbar{|}
6140
\def\normalgreater{>}
6142
\def\normaldollar{$}
6144
% This macro is used to make a character print one way in ttfont
6145
% where it can probably just be output, and another way in other fonts,
6146
% where something hairier probably needs to be done.
6148
% #1 is what to print if we are indeed using \tt; #2 is what to print
6149
% otherwise. Since all the Computer Modern typewriter fonts have zero
6150
% interword stretch (and shrink), and it is reasonable to expect all
6151
% typewriter fonts to have this, we can check that font parameter.
6153
\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
6155
% Same as above, but check for italic font. Actually this also catches
6156
% non-italic slanted fonts since it is impossible to distinguish them from
6157
% italic fonts. But since this is only used by $ and it uses \sl anyway
6158
% this is not a problem.
6159
\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
6161
% Turn off all special characters except @
6162
% (and those which the user can use as if they were ordinary).
6163
% Most of these we simply print from the \tt font, but for some, we can
6164
% use math or other variants that look better in normal text.
6167
\def\activedoublequote{{\tt\char34}}
6168
\let"=\activedoublequote
6170
\def~{{\tt\char126}}
6176
\def_{\ifusingtt\normalunderscore\_}
6177
% Subroutine for the previous macro.
6178
\def\_{\leavevmode \kern.06em \vbox{\hrule width.3em height.1ex}}
6181
\def|{{\tt\char124}}
6189
\def+{{\tt \char 43}}
6191
\def${\ifusingit{{\sl\$}}\normaldollar}
6192
%\catcode 27=\active
6193
%\def^^[{$\diamondsuit$}
6195
% Set up an active definition for =, but don't enable it most of the time.
6196
{\catcode`\==\active
6197
\global\def={{\tt \char 61}}}
6202
% If a .fmt file is being used, characters that might appear in a file
6203
% name cannot be active until we have parsed the command line.
6204
% So turn them off again, and have \everyjob (or @setfilename) turn them on.
6205
% \otherifyactive is called near the end of this file.
6206
\def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
6210
% \rawbackslashxx output one backslash character in current font
6211
\global\chardef\rawbackslashxx=`\\
6212
%{\catcode`\\=\other
6213
%@gdef@rawbackslashxx{\}}
6215
% \rawbackslash redefines \ as input to do \rawbackslashxx.
6216
{\catcode`\\=\active
6217
@gdef@rawbackslash{@let\=@rawbackslashxx }}
6219
% \normalbackslash outputs one backslash in fixed width font.
6220
\def\normalbackslash{{\tt\rawbackslashxx}}
6222
% \catcode 17=0 % Define control-q
6225
% Used sometimes to turn off (effectively) the active characters
6226
% even after parsing them.
6227
@def@turnoffactive{@let"=@normaldoublequote
6228
@let\=@realbackslash
6231
@let_=@normalunderscore
6232
@let|=@normalverticalbar
6234
@let>=@normalgreater
6236
@let$=@normaldollar}
6238
@def@normalturnoffactive{@let"=@normaldoublequote
6239
@let\=@normalbackslash
6242
@let_=@normalunderscore
6243
@let|=@normalverticalbar
6245
@let>=@normalgreater
6247
@let$=@normaldollar}
6249
% Make _ and + \other characters, temporarily.
6250
% This is canceled by @fixbackslash.
6253
% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
6254
% That is what \eatinput is for; after that, the `\' should revert to printing
6257
@gdef@eatinput input texinfo{@fixbackslash}
6258
@global@let\ = @eatinput
6260
% On the other hand, perhaps the file did not have a `\input texinfo'. Then
6261
% the first `\{ in the file would cause an error. This macro tries to fix
6262
% that, assuming it is called before the first `\' could plausibly occur.
6263
% Also back turn on active characters that might appear in the input
6264
% file name, in case not using a pre-dumped format.
6266
@gdef@fixbackslash{%
6267
@ifx\@eatinput @let\ = @normalbackslash @fi
6272
% Say @foo, not \foo, in error messages.
6275
% These look ok in all fonts, so just make them not special.
6276
@catcode`@& = @other
6277
@catcode`@# = @other
6278
@catcode`@% = @other
6280
@c Set initial fonts.
6286
@c eval: (add-hook 'write-file-hooks 'time-stamp)
6287
@c page-delimiter: "^\\\\message"
6288
@c time-stamp-start: "def\\\\texinfoversion{"
6289
@c time-stamp-format: "%:y-%02m-%02d.%02H"
6290
@c time-stamp-end: "}"