3
# This file provides a set of autoconf macros to help TEA-enable
6
# Copyright (c) 1999-2000 Ajuba Solutions.
7
# Copyright (c) 2002-2005 ActiveState Corporation.
9
# See the file "license.terms" for information on usage and redistribution
10
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
12
# RCS: @(#) $Id: tcl.m4,v 1.10 2010/12/08 21:44:56 andreas_kupries Exp $
16
dnl TEA extensions pass us the version of TEA they think they
17
dnl are compatible with (must be set in TEA_INIT below)
20
# Possible values for key variables defined:
22
# TEA_WINDOWINGSYSTEM - win32 aqua x11 (mirrors 'tk windowingsystem')
23
# TEA_PLATFORM - windows unix
26
#------------------------------------------------------------------------
27
# TEA_PATH_TCLCONFIG --
29
# Locate the tclConfig.sh file and perform a sanity check on
30
# the Tcl compile flags
37
# Adds the following arguments to configure:
40
# Defines the following vars:
41
# TCL_BIN_DIR Full path to the directory containing
42
# the tclConfig.sh file
43
#------------------------------------------------------------------------
45
AC_DEFUN([TEA_PATH_TCLCONFIG], [
46
dnl TEA specific: Make sure we are initialized
47
AC_REQUIRE([TEA_INIT])
49
# Ok, lets find the tcl configuration
50
# First, look for one uninstalled.
51
# the alternative search directory is invoked by --with-tcl
54
if test x"${no_tcl}" = x ; then
55
# we reset no_tcl in case something fails here
58
AC_HELP_STRING([--with-tcl],
59
[directory containing tcl configuration (tclConfig.sh)]),
60
with_tclconfig="${withval}")
61
AC_MSG_CHECKING([for Tcl configuration])
62
AC_CACHE_VAL(ac_cv_c_tclconfig,[
64
# First check to see if --with-tcl was specified.
65
if test x"${with_tclconfig}" != x ; then
66
case "${with_tclconfig}" in
68
if test -f "${with_tclconfig}"; then
69
AC_MSG_WARN([--with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself])
70
with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`"
73
if test -f "${with_tclconfig}/tclConfig.sh" ; then
74
ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`"
76
AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh])
80
# then check for a private Tcl installation
81
if test x"${ac_cv_c_tclconfig}" = x ; then
84
`ls -dr ../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
85
`ls -dr ../tcl[[8-9]].[[0-9]] 2>/dev/null` \
86
`ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \
88
`ls -dr ../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
89
`ls -dr ../../tcl[[8-9]].[[0-9]] 2>/dev/null` \
90
`ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \
92
`ls -dr ../../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
93
`ls -dr ../../../tcl[[8-9]].[[0-9]] 2>/dev/null` \
94
`ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do
95
if test "${TEA_PLATFORM}" = "windows" \
96
-a -f "$i/win/tclConfig.sh" ; then
97
ac_cv_c_tclconfig="`(cd $i/win; pwd)`"
100
if test -f "$i/unix/tclConfig.sh" ; then
101
ac_cv_c_tclconfig="`(cd $i/unix; pwd)`"
107
# on Darwin, check in Framework installation locations
108
if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then
109
for i in `ls -d ~/Library/Frameworks 2>/dev/null` \
110
`ls -d /Library/Frameworks 2>/dev/null` \
111
`ls -d /Network/Library/Frameworks 2>/dev/null` \
112
`ls -d /System/Library/Frameworks 2>/dev/null` \
114
if test -f "$i/Tcl.framework/tclConfig.sh" ; then
115
ac_cv_c_tclconfig="`(cd $i/Tcl.framework; pwd)`"
121
# TEA specific: on Windows, check in common installation locations
122
if test "${TEA_PLATFORM}" = "windows" \
123
-a x"${ac_cv_c_tclconfig}" = x ; then
124
for i in `ls -d C:/Tcl/lib 2>/dev/null` \
125
`ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \
127
if test -f "$i/tclConfig.sh" ; then
128
ac_cv_c_tclconfig="`(cd $i; pwd)`"
134
# check in a few common install locations
135
if test x"${ac_cv_c_tclconfig}" = x ; then
136
for i in `ls -d ${libdir} 2>/dev/null` \
137
`ls -d ${exec_prefix}/lib 2>/dev/null` \
138
`ls -d ${prefix}/lib 2>/dev/null` \
139
`ls -d /usr/local/lib 2>/dev/null` \
140
`ls -d /usr/contrib/lib 2>/dev/null` \
141
`ls -d /usr/lib 2>/dev/null` \
142
`ls -d /usr/lib64 2>/dev/null` \
144
if test -f "$i/tclConfig.sh" ; then
145
ac_cv_c_tclconfig="`(cd $i; pwd)`"
151
# check in a few other private locations
152
if test x"${ac_cv_c_tclconfig}" = x ; then
155
`ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
156
`ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]] 2>/dev/null` \
157
`ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do
158
if test "${TEA_PLATFORM}" = "windows" \
159
-a -f "$i/win/tclConfig.sh" ; then
160
ac_cv_c_tclconfig="`(cd $i/win; pwd)`"
163
if test -f "$i/unix/tclConfig.sh" ; then
164
ac_cv_c_tclconfig="`(cd $i/unix; pwd)`"
171
if test x"${ac_cv_c_tclconfig}" = x ; then
172
TCL_BIN_DIR="# no Tcl configs found"
173
AC_MSG_ERROR([Can't find Tcl configuration definitions])
176
TCL_BIN_DIR="${ac_cv_c_tclconfig}"
177
AC_MSG_RESULT([found ${TCL_BIN_DIR}/tclConfig.sh])
182
#------------------------------------------------------------------------
183
# TEA_PATH_TKCONFIG --
185
# Locate the tkConfig.sh file
192
# Adds the following arguments to configure:
195
# Defines the following vars:
196
# TK_BIN_DIR Full path to the directory containing
197
# the tkConfig.sh file
198
#------------------------------------------------------------------------
200
AC_DEFUN([TEA_PATH_TKCONFIG], [
202
# Ok, lets find the tk configuration
203
# First, look for one uninstalled.
204
# the alternative search directory is invoked by --with-tk
207
if test x"${no_tk}" = x ; then
208
# we reset no_tk in case something fails here
211
AC_HELP_STRING([--with-tk],
212
[directory containing tk configuration (tkConfig.sh)]),
213
with_tkconfig="${withval}")
214
AC_MSG_CHECKING([for Tk configuration])
215
AC_CACHE_VAL(ac_cv_c_tkconfig,[
217
# First check to see if --with-tkconfig was specified.
218
if test x"${with_tkconfig}" != x ; then
219
case "${with_tkconfig}" in
221
if test -f "${with_tkconfig}"; then
222
AC_MSG_WARN([--with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself])
223
with_tkconfig="`echo "${with_tkconfig}" | sed 's!/tkConfig\.sh$!!'`"
226
if test -f "${with_tkconfig}/tkConfig.sh" ; then
227
ac_cv_c_tkconfig="`(cd "${with_tkconfig}"; pwd)`"
229
AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh])
233
# then check for a private Tk library
234
if test x"${ac_cv_c_tkconfig}" = x ; then
237
`ls -dr ../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
238
`ls -dr ../tk[[8-9]].[[0-9]] 2>/dev/null` \
239
`ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \
241
`ls -dr ../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
242
`ls -dr ../../tk[[8-9]].[[0-9]] 2>/dev/null` \
243
`ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \
245
`ls -dr ../../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
246
`ls -dr ../../../tk[[8-9]].[[0-9]] 2>/dev/null` \
247
`ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do
248
if test "${TEA_PLATFORM}" = "windows" \
249
-a -f "$i/win/tkConfig.sh" ; then
250
ac_cv_c_tkconfig="`(cd $i/win; pwd)`"
253
if test -f "$i/unix/tkConfig.sh" ; then
254
ac_cv_c_tkconfig="`(cd $i/unix; pwd)`"
260
# on Darwin, check in Framework installation locations
261
if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tkconfig}" = x ; then
262
for i in `ls -d ~/Library/Frameworks 2>/dev/null` \
263
`ls -d /Library/Frameworks 2>/dev/null` \
264
`ls -d /Network/Library/Frameworks 2>/dev/null` \
265
`ls -d /System/Library/Frameworks 2>/dev/null` \
267
if test -f "$i/Tk.framework/tkConfig.sh" ; then
268
ac_cv_c_tkconfig="`(cd $i/Tk.framework; pwd)`"
274
# check in a few common install locations
275
if test x"${ac_cv_c_tkconfig}" = x ; then
276
for i in `ls -d ${libdir} 2>/dev/null` \
277
`ls -d ${exec_prefix}/lib 2>/dev/null` \
278
`ls -d ${prefix}/lib 2>/dev/null` \
279
`ls -d /usr/local/lib 2>/dev/null` \
280
`ls -d /usr/contrib/lib 2>/dev/null` \
281
`ls -d /usr/lib 2>/dev/null` \
282
`ls -d /usr/lib64 2>/dev/null` \
284
if test -f "$i/tkConfig.sh" ; then
285
ac_cv_c_tkconfig="`(cd $i; pwd)`"
291
# TEA specific: on Windows, check in common installation locations
292
if test "${TEA_PLATFORM}" = "windows" \
293
-a x"${ac_cv_c_tkconfig}" = x ; then
294
for i in `ls -d C:/Tcl/lib 2>/dev/null` \
295
`ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \
297
if test -f "$i/tkConfig.sh" ; then
298
ac_cv_c_tkconfig="`(cd $i; pwd)`"
304
# check in a few other private locations
305
if test x"${ac_cv_c_tkconfig}" = x ; then
308
`ls -dr ${srcdir}/../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
309
`ls -dr ${srcdir}/../tk[[8-9]].[[0-9]] 2>/dev/null` \
310
`ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do
311
if test "${TEA_PLATFORM}" = "windows" \
312
-a -f "$i/win/tkConfig.sh" ; then
313
ac_cv_c_tkconfig="`(cd $i/win; pwd)`"
316
if test -f "$i/unix/tkConfig.sh" ; then
317
ac_cv_c_tkconfig="`(cd $i/unix; pwd)`"
324
if test x"${ac_cv_c_tkconfig}" = x ; then
325
TK_BIN_DIR="# no Tk configs found"
326
AC_MSG_ERROR([Can't find Tk configuration definitions])
329
TK_BIN_DIR="${ac_cv_c_tkconfig}"
330
AC_MSG_RESULT([found ${TK_BIN_DIR}/tkConfig.sh])
335
#------------------------------------------------------------------------
336
# TEA_LOAD_TCLCONFIG --
338
# Load the tclConfig.sh file
342
# Requires the following vars to be set:
347
# Subst the following vars:
352
#------------------------------------------------------------------------
354
AC_DEFUN([TEA_LOAD_TCLCONFIG], [
355
AC_MSG_CHECKING([for existence of ${TCL_BIN_DIR}/tclConfig.sh])
357
if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then
358
AC_MSG_RESULT([loading])
359
. "${TCL_BIN_DIR}/tclConfig.sh"
361
AC_MSG_RESULT([could not find ${TCL_BIN_DIR}/tclConfig.sh])
364
# eval is required to do the TCL_DBGX substitution
365
eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\""
366
eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\""
368
# If the TCL_BIN_DIR is the build directory (not the install directory),
369
# then set the common variable name to the value of the build variables.
370
# For example, the variable TCL_LIB_SPEC will be set to the value
371
# of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC
372
# instead of TCL_BUILD_LIB_SPEC since it will work with both an
373
# installed and uninstalled version of Tcl.
374
if test -f "${TCL_BIN_DIR}/Makefile" ; then
375
TCL_LIB_SPEC="${TCL_BUILD_LIB_SPEC}"
376
TCL_STUB_LIB_SPEC="${TCL_BUILD_STUB_LIB_SPEC}"
377
TCL_STUB_LIB_PATH="${TCL_BUILD_STUB_LIB_PATH}"
378
elif test "`uname -s`" = "Darwin"; then
379
# If Tcl was built as a framework, attempt to use the libraries
380
# from the framework at the given location so that linking works
381
# against Tcl.framework installed in an arbitrary location.
384
if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then
385
for i in "`cd "${TCL_BIN_DIR}"; pwd`" \
386
"`cd "${TCL_BIN_DIR}"/../..; pwd`"; do
387
if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then
388
TCL_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TCL_LIB_FILE}"
393
if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then
394
TCL_STUB_LIB_SPEC="-L`echo "${TCL_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TCL_STUB_LIB_FLAG}"
395
TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"
401
# eval is required to do the TCL_DBGX substitution
402
eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\""
403
eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\""
404
eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\""
405
eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\""
407
AC_SUBST(TCL_VERSION)
408
AC_SUBST(TCL_PATCH_LEVEL)
409
AC_SUBST(TCL_BIN_DIR)
410
AC_SUBST(TCL_SRC_DIR)
412
AC_SUBST(TCL_LIB_FILE)
413
AC_SUBST(TCL_LIB_FLAG)
414
AC_SUBST(TCL_LIB_SPEC)
416
AC_SUBST(TCL_STUB_LIB_FILE)
417
AC_SUBST(TCL_STUB_LIB_FLAG)
418
AC_SUBST(TCL_STUB_LIB_SPEC)
422
AC_MSG_CHECKING([for cygwin variant])
423
case ${TCL_EXTRA_CFLAGS} in
424
*-mwin32*|*-mno-cygwin*)
425
TEA_PLATFORM="windows"
426
CFLAGS="$CFLAGS -mwin32"
427
AC_MSG_RESULT([win32])
431
AC_MSG_RESULT([unix])
440
# The BUILD_$pkg is to define the correct extern storage class
441
# handling when making this package
442
AC_DEFINE_UNQUOTED(BUILD_${PACKAGE_NAME}, [],
443
[Building extension source?])
444
# Do this here as we have fully defined TEA_PLATFORM now
445
if test "${TEA_PLATFORM}" = "windows" ; then
446
CLEANFILES="$CLEANFILES *.lib *.dll *.pdb *.exp"
453
AC_SUBST(TCL_EXTRA_CFLAGS)
454
AC_SUBST(TCL_LD_FLAGS)
455
AC_SUBST(TCL_SHLIB_LD_LIBS)
458
#------------------------------------------------------------------------
459
# TEA_LOAD_TKCONFIG --
461
# Load the tkConfig.sh file
465
# Requires the following vars to be set:
470
# Sets the following vars that should be in tkConfig.sh:
472
#------------------------------------------------------------------------
474
AC_DEFUN([TEA_LOAD_TKCONFIG], [
475
AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh])
477
if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then
478
AC_MSG_RESULT([loading])
479
. "${TK_BIN_DIR}/tkConfig.sh"
481
AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh])
484
# eval is required to do the TK_DBGX substitution
485
eval "TK_LIB_FILE=\"${TK_LIB_FILE}\""
486
eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\""
488
# If the TK_BIN_DIR is the build directory (not the install directory),
489
# then set the common variable name to the value of the build variables.
490
# For example, the variable TK_LIB_SPEC will be set to the value
491
# of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC
492
# instead of TK_BUILD_LIB_SPEC since it will work with both an
493
# installed and uninstalled version of Tcl.
494
if test -f "${TK_BIN_DIR}/Makefile" ; then
495
TK_LIB_SPEC="${TK_BUILD_LIB_SPEC}"
496
TK_STUB_LIB_SPEC="${TK_BUILD_STUB_LIB_SPEC}"
497
TK_STUB_LIB_PATH="${TK_BUILD_STUB_LIB_PATH}"
498
elif test "`uname -s`" = "Darwin"; then
499
# If Tk was built as a framework, attempt to use the libraries
500
# from the framework at the given location so that linking works
501
# against Tk.framework installed in an arbitrary location.
504
if test -f "${TK_BIN_DIR}/${TK_LIB_FILE}"; then
505
for i in "`cd "${TK_BIN_DIR}"; pwd`" \
506
"`cd "${TK_BIN_DIR}"/../..; pwd`"; do
507
if test "`basename "$i"`" = "${TK_LIB_FILE}.framework"; then
508
TK_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TK_LIB_FILE}"
513
if test -f "${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"; then
514
TK_STUB_LIB_SPEC="-L` echo "${TK_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TK_STUB_LIB_FLAG}"
515
TK_STUB_LIB_PATH="${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"
521
# eval is required to do the TK_DBGX substitution
522
eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\""
523
eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\""
524
eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\""
525
eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\""
527
# TEA specific: Ensure windowingsystem is defined
528
if test "${TEA_PLATFORM}" = "unix" ; then
531
AC_DEFINE(MAC_OSX_TK, 1, [Are we building against Mac OS X TkAqua?])
532
TEA_WINDOWINGSYSTEM="aqua"
535
TEA_WINDOWINGSYSTEM="x11"
538
elif test "${TEA_PLATFORM}" = "windows" ; then
539
TEA_WINDOWINGSYSTEM="win32"
546
AC_SUBST(TK_LIB_FILE)
547
AC_SUBST(TK_LIB_FLAG)
548
AC_SUBST(TK_LIB_SPEC)
550
AC_SUBST(TK_STUB_LIB_FILE)
551
AC_SUBST(TK_STUB_LIB_FLAG)
552
AC_SUBST(TK_STUB_LIB_SPEC)
556
AC_SUBST(TK_XINCLUDES)
559
#------------------------------------------------------------------------
561
# Determine the fully qualified path name of the tclsh executable
562
# in the Tcl build directory or the tclsh installed in a bin
563
# directory. This macro will correctly determine the name
564
# of the tclsh executable even if tclsh has not yet been
565
# built in the build directory. The tclsh found is always
566
# associated with a tclConfig.sh file. This tclsh should be used
567
# only for running extension test cases. It should never be
568
# or generation of files (like pkgIndex.tcl) at build time.
574
# Subst's the following values:
576
#------------------------------------------------------------------------
578
AC_DEFUN([TEA_PROG_TCLSH], [
579
AC_MSG_CHECKING([for tclsh])
580
if test -f "${TCL_BIN_DIR}/Makefile" ; then
581
# tclConfig.sh is in Tcl build directory
582
if test "${TEA_PLATFORM}" = "windows"; then
583
TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}"
585
TCLSH_PROG="${TCL_BIN_DIR}/tclsh"
588
# tclConfig.sh is in install location
589
if test "${TEA_PLATFORM}" = "windows"; then
590
TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}"
592
TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}.${TCL_MINOR_VERSION}${TCL_DBGX}"
594
list="`ls -d ${TCL_BIN_DIR}/../bin 2>/dev/null` \
595
`ls -d ${TCL_BIN_DIR}/.. 2>/dev/null` \
596
`ls -d ${TCL_PREFIX}/bin 2>/dev/null`"
598
if test -f "$i/${TCLSH_PROG}" ; then
599
REAL_TCL_BIN_DIR="`cd "$i"; pwd`/"
603
TCLSH_PROG="${REAL_TCL_BIN_DIR}${TCLSH_PROG}"
605
AC_MSG_RESULT([${TCLSH_PROG}])
609
#------------------------------------------------------------------------
611
# Determine the fully qualified path name of the wish executable
612
# in the Tk build directory or the wish installed in a bin
613
# directory. This macro will correctly determine the name
614
# of the wish executable even if wish has not yet been
615
# built in the build directory. The wish found is always
616
# associated with a tkConfig.sh file. This wish should be used
617
# only for running extension test cases. It should never be
618
# or generation of files (like pkgIndex.tcl) at build time.
624
# Subst's the following values:
626
#------------------------------------------------------------------------
628
AC_DEFUN([TEA_PROG_WISH], [
629
AC_MSG_CHECKING([for wish])
630
if test -f "${TK_BIN_DIR}/Makefile" ; then
631
# tkConfig.sh is in Tk build directory
632
if test "${TEA_PLATFORM}" = "windows"; then
633
WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}"
635
WISH_PROG="${TK_BIN_DIR}/wish"
638
# tkConfig.sh is in install location
639
if test "${TEA_PLATFORM}" = "windows"; then
640
WISH_PROG="wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}"
642
WISH_PROG="wish${TK_MAJOR_VERSION}.${TK_MINOR_VERSION}${TK_DBGX}"
644
list="`ls -d ${TK_BIN_DIR}/../bin 2>/dev/null` \
645
`ls -d ${TK_BIN_DIR}/.. 2>/dev/null` \
646
`ls -d ${TK_PREFIX}/bin 2>/dev/null`"
648
if test -f "$i/${WISH_PROG}" ; then
649
REAL_TK_BIN_DIR="`cd "$i"; pwd`/"
653
WISH_PROG="${REAL_TK_BIN_DIR}${WISH_PROG}"
655
AC_MSG_RESULT([${WISH_PROG}])
659
#------------------------------------------------------------------------
660
# TEA_ENABLE_SHARED --
662
# Allows the building of shared libraries
669
# Adds the following arguments to configure:
670
# --enable-shared=yes|no
672
# Defines the following vars:
673
# STATIC_BUILD Used for building import/export libraries
676
# Sets the following vars:
677
# SHARED_BUILD Value of 1 or 0
678
#------------------------------------------------------------------------
680
AC_DEFUN([TEA_ENABLE_SHARED], [
681
AC_MSG_CHECKING([how to build libraries])
682
AC_ARG_ENABLE(shared,
683
AC_HELP_STRING([--enable-shared],
684
[build and link with shared libraries (default: on)]),
685
[tcl_ok=$enableval], [tcl_ok=yes])
687
if test "${enable_shared+set}" = set; then
688
enableval="$enable_shared"
694
if test "$tcl_ok" = "yes" ; then
695
AC_MSG_RESULT([shared])
698
AC_MSG_RESULT([static])
700
AC_DEFINE(STATIC_BUILD, 1, [Is this a static build?])
702
AC_SUBST(SHARED_BUILD)
705
#------------------------------------------------------------------------
706
# TEA_ENABLE_THREADS --
708
# Specify if thread support should be enabled. If "yes" is specified
709
# as an arg (optional), threads are enabled by default, "no" means
710
# threads are disabled. "yes" is the default.
712
# TCL_THREADS is checked so that if you are compiling an extension
713
# against a threaded core, your extension must be compiled threaded
716
# Note that it is legal to have a thread enabled extension run in a
717
# threaded or non-threaded Tcl core, but a non-threaded extension may
718
# only run in a non-threaded Tcl core.
725
# Adds the following arguments to configure:
728
# Sets the following vars:
729
# THREADS_LIBS Thread library(s)
731
# Defines the following vars:
736
#------------------------------------------------------------------------
738
AC_DEFUN([TEA_ENABLE_THREADS], [
739
AC_ARG_ENABLE(threads,
740
AC_HELP_STRING([--enable-threads],
741
[build with threads]),
742
[tcl_ok=$enableval], [tcl_ok=yes])
744
if test "${enable_threads+set}" = set; then
745
enableval="$enable_threads"
751
if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then
754
if test "${TEA_PLATFORM}" != "windows" ; then
755
# We are always OK on Windows, so check what this platform wants:
757
# USE_THREAD_ALLOC tells us to try the special thread-based
758
# allocator that significantly reduces lock contention
759
AC_DEFINE(USE_THREAD_ALLOC, 1,
760
[Do we want to use the threaded memory allocator?])
761
AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?])
762
if test "`uname -s`" = "SunOS" ; then
763
AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1,
764
[Do we really want to follow the standard? Yes we do!])
766
AC_DEFINE(_THREAD_SAFE, 1, [Do we want the thread-safe OS API?])
767
AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no)
768
if test "$tcl_ok" = "no"; then
769
# Check a little harder for __pthread_mutex_init in the same
770
# library, as some systems hide it there until pthread.h is
771
# defined. We could alternatively do an AC_TRY_COMPILE with
772
# pthread.h, but that will work with libpthread really doesn't
773
# exist, like AIX 4.2. [Bug: 4359]
774
AC_CHECK_LIB(pthread, __pthread_mutex_init,
775
tcl_ok=yes, tcl_ok=no)
778
if test "$tcl_ok" = "yes"; then
779
# The space is needed
780
THREADS_LIBS=" -lpthread"
782
AC_CHECK_LIB(pthreads, pthread_mutex_init,
783
tcl_ok=yes, tcl_ok=no)
784
if test "$tcl_ok" = "yes"; then
785
# The space is needed
786
THREADS_LIBS=" -lpthreads"
788
AC_CHECK_LIB(c, pthread_mutex_init,
789
tcl_ok=yes, tcl_ok=no)
790
if test "$tcl_ok" = "no"; then
791
AC_CHECK_LIB(c_r, pthread_mutex_init,
792
tcl_ok=yes, tcl_ok=no)
793
if test "$tcl_ok" = "yes"; then
794
# The space is needed
795
THREADS_LIBS=" -pthread"
798
AC_MSG_WARN([Do not know how to find pthread lib on your system - thread support disabled])
807
# Do checking message here to not mess up interleaved configure output
808
AC_MSG_CHECKING([for building with threads])
809
if test "${TCL_THREADS}" = 1; then
810
AC_DEFINE(TCL_THREADS, 1, [Are we building with threads enabled?])
811
AC_MSG_RESULT([yes (default)])
815
# TCL_THREADS sanity checking. See if our request for building with
816
# threads is the same as the way Tcl was built. If not, warn the user.
819
if test "${TCL_THREADS}" = "0"; then
821
Building ${PACKAGE_NAME} without threads enabled, but building against Tcl
822
that IS thread-enabled. It is recommended to use --enable-threads.])
826
if test "${TCL_THREADS}" = "1"; then
828
--enable-threads requested, but building against a Tcl that is NOT
829
thread-enabled. This is an OK configuration that will also run in
830
a thread-enabled core.])
834
AC_SUBST(TCL_THREADS)
837
#------------------------------------------------------------------------
838
# TEA_ENABLE_SYMBOLS --
840
# Specify if debugging symbols should be used.
841
# Memory (TCL_MEM_DEBUG) debugging can also be enabled.
846
# TEA varies from core Tcl in that C|LDFLAGS_DEFAULT receives
847
# the value of C|LDFLAGS_OPTIMIZE|DEBUG already substituted.
848
# Requires the following vars to be set in the Makefile:
854
# Adds the following arguments to configure:
857
# Defines the following vars:
858
# CFLAGS_DEFAULT Sets to $(CFLAGS_DEBUG) if true
859
# Sets to $(CFLAGS_OPTIMIZE) if false
860
# LDFLAGS_DEFAULT Sets to $(LDFLAGS_DEBUG) if true
861
# Sets to $(LDFLAGS_OPTIMIZE) if false
862
# DBGX Formerly used as debug library extension;
865
#------------------------------------------------------------------------
867
AC_DEFUN([TEA_ENABLE_SYMBOLS], [
868
dnl TEA specific: Make sure we are initialized
869
AC_REQUIRE([TEA_CONFIG_CFLAGS])
870
AC_MSG_CHECKING([for build with symbols])
871
AC_ARG_ENABLE(symbols,
872
AC_HELP_STRING([--enable-symbols],
873
[build with debugging symbols (default: off)]),
874
[tcl_ok=$enableval], [tcl_ok=no])
876
if test "$tcl_ok" = "no"; then
877
CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE}"
878
LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}"
881
CFLAGS_DEFAULT="${CFLAGS_DEBUG}"
882
LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}"
883
if test "$tcl_ok" = "yes"; then
884
AC_MSG_RESULT([yes (standard debugging)])
888
if test "${TEA_PLATFORM}" != "windows" ; then
889
LDFLAGS_DEFAULT="${LDFLAGS}"
891
AC_SUBST(CFLAGS_DEFAULT)
892
AC_SUBST(LDFLAGS_DEFAULT)
895
if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then
896
AC_DEFINE(TCL_MEM_DEBUG, 1, [Is memory debugging enabled?])
899
if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then
900
if test "$tcl_ok" = "all"; then
901
AC_MSG_RESULT([enabled symbols mem debugging])
903
AC_MSG_RESULT([enabled $tcl_ok debugging])
908
#------------------------------------------------------------------------
909
# TEA_ENABLE_LANGINFO --
911
# Allows use of modern nl_langinfo check for better l10n.
912
# This is only relevant for Unix.
919
# Adds the following arguments to configure:
920
# --enable-langinfo=yes|no (default is yes)
922
# Defines the following vars:
923
# HAVE_LANGINFO Triggers use of nl_langinfo if defined.
925
#------------------------------------------------------------------------
927
AC_DEFUN([TEA_ENABLE_LANGINFO], [
928
AC_ARG_ENABLE(langinfo,
929
AC_HELP_STRING([--enable-langinfo],
930
[use nl_langinfo if possible to determine encoding at startup, otherwise use old heuristic (default: on)]),
931
[langinfo_ok=$enableval], [langinfo_ok=yes])
934
if test "$langinfo_ok" = "yes"; then
935
AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no])
937
AC_MSG_CHECKING([whether to use nl_langinfo])
938
if test "$langinfo_ok" = "yes"; then
939
AC_CACHE_VAL(tcl_cv_langinfo_h, [
940
AC_TRY_COMPILE([#include <langinfo.h>], [nl_langinfo(CODESET);],
941
[tcl_cv_langinfo_h=yes],[tcl_cv_langinfo_h=no])])
942
AC_MSG_RESULT([$tcl_cv_langinfo_h])
943
if test $tcl_cv_langinfo_h = yes; then
944
AC_DEFINE(HAVE_LANGINFO, 1, [Do we have nl_langinfo()?])
947
AC_MSG_RESULT([$langinfo_ok])
951
#--------------------------------------------------------------------
954
# Determine what the system is (some things cannot be easily checked
955
# on a feature-driven basis, alas). This can usually be done via the
962
# Defines the following var:
964
# system - System/platform/version identification code.
966
#--------------------------------------------------------------------
968
AC_DEFUN([TEA_CONFIG_SYSTEM], [
969
AC_CACHE_CHECK([system version], tcl_cv_sys_version, [
971
if test "${TEA_PLATFORM}" = "windows" ; then
972
tcl_cv_sys_version=windows
974
tcl_cv_sys_version=`uname -s`-`uname -r`
975
if test "$?" -ne 0 ; then
976
AC_MSG_WARN([can't find uname command])
977
tcl_cv_sys_version=unknown
979
if test "`uname -s`" = "AIX" ; then
980
tcl_cv_sys_version=AIX-`uname -v`.`uname -r`
985
system=$tcl_cv_sys_version
988
#--------------------------------------------------------------------
991
# Try to determine the proper flags to pass to the compiler
992
# for building shared libraries and other such nonsense.
999
# Defines and substitutes the following vars:
1001
# DL_OBJS, DL_LIBS - removed for TEA, only needed by core.
1002
# LDFLAGS - Flags to pass to the compiler when linking object
1003
# files into an executable application binary such
1005
# LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib",
1006
# that tell the run-time dynamic linker where to look
1007
# for shared libraries such as libtcl.so. Depends on
1008
# the variable LIB_RUNTIME_DIR in the Makefile. Could
1009
# be the same as CC_SEARCH_FLAGS if ${CC} is used to link.
1010
# CC_SEARCH_FLAGS-Flags to pass to ${CC}, such as "-Wl,-rpath,/usr/local/tcl/lib",
1011
# that tell the run-time dynamic linker where to look
1012
# for shared libraries such as libtcl.so. Depends on
1013
# the variable LIB_RUNTIME_DIR in the Makefile.
1014
# SHLIB_CFLAGS - Flags to pass to cc when compiling the components
1015
# of a shared library (may request position-independent
1016
# code, among other things).
1017
# SHLIB_LD - Base command to use for combining object files
1018
# into a shared library.
1019
# SHLIB_LD_LIBS - Dependent libraries for the linker to scan when
1020
# creating shared libraries. This symbol typically
1021
# goes at the end of the "ld" commands that build
1022
# shared libraries. The value of the symbol defaults to
1023
# "${LIBS}" if all of the dependent libraries should
1024
# be specified when creating a shared library. If
1025
# dependent libraries should not be specified (as on
1026
# SunOS 4.x, where they cause the link to fail, or in
1027
# general if Tcl and Tk aren't themselves shared
1028
# libraries), then this symbol has an empty string
1030
# SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable
1031
# extensions. An empty string means we don't know how
1032
# to use shared libraries on this platform.
1033
# LIB_SUFFIX - Specifies everything that comes after the "libfoo"
1034
# in a static or shared library name, using the $VERSION variable
1035
# to put the version in the right place. This is used
1036
# by platforms that need non-standard library names.
1037
# Examples: ${VERSION}.so.1.1 on NetBSD, since it needs
1038
# to have a version after the .so, and ${VERSION}.a
1039
# on AIX, since a shared library needs to have
1040
# a .a extension whereas shared objects for loadable
1041
# extensions have a .so extension. Defaults to
1042
# ${VERSION}${SHLIB_SUFFIX}.
1044
# Flags used when running the compiler in debug mode
1046
# Flags used when running the compiler in optimize mode
1047
# CFLAGS - Additional CFLAGS added as necessary (usually 64-bit)
1049
#--------------------------------------------------------------------
1051
AC_DEFUN([TEA_CONFIG_CFLAGS], [
1052
dnl TEA specific: Make sure we are initialized
1053
AC_REQUIRE([TEA_INIT])
1055
# Step 0.a: Enable 64 bit support?
1057
AC_MSG_CHECKING([if 64bit support is requested])
1058
AC_ARG_ENABLE(64bit,
1059
AC_HELP_STRING([--enable-64bit],
1060
[enable 64bit support (default: off)]),
1061
[do64bit=$enableval], [do64bit=no])
1062
AC_MSG_RESULT([$do64bit])
1064
# Step 0.b: Enable Solaris 64 bit VIS support?
1066
AC_MSG_CHECKING([if 64bit Sparc VIS support is requested])
1067
AC_ARG_ENABLE(64bit-vis,
1068
AC_HELP_STRING([--enable-64bit-vis],
1069
[enable 64bit Sparc VIS support (default: off)]),
1070
[do64bitVIS=$enableval], [do64bitVIS=no])
1071
AC_MSG_RESULT([$do64bitVIS])
1072
# Force 64bit on with VIS
1073
AS_IF([test "$do64bitVIS" = "yes"], [do64bit=yes])
1075
# Step 0.c: Check if visibility support is available. Do this here so
1076
# that platform specific alternatives can be used below if this fails.
1078
AC_CACHE_CHECK([if compiler supports visibility "hidden"],
1079
tcl_cv_cc_visibility_hidden, [
1080
hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -Werror"
1082
extern __attribute__((__visibility__("hidden"))) void f(void);
1083
void f(void) {}], [f();], tcl_cv_cc_visibility_hidden=yes,
1084
tcl_cv_cc_visibility_hidden=no)
1085
CFLAGS=$hold_cflags])
1086
AS_IF([test $tcl_cv_cc_visibility_hidden = yes], [
1087
AC_DEFINE(MODULE_SCOPE,
1088
[extern __attribute__((__visibility__("hidden")))],
1089
[Compiler support for module scope symbols])
1092
# Step 0.d: Disable -rpath support?
1094
AC_MSG_CHECKING([if rpath support is requested])
1095
AC_ARG_ENABLE(rpath,
1096
AC_HELP_STRING([--disable-rpath],
1097
[disable rpath support (default: on)]),
1098
[doRpath=$enableval], [doRpath=yes])
1099
AC_MSG_RESULT([$doRpath])
1101
# TEA specific: Cross-compiling options for Windows/CE builds?
1103
AS_IF([test "${TEA_PLATFORM}" = windows], [
1104
AC_MSG_CHECKING([if Windows/CE build is requested])
1105
AC_ARG_ENABLE(wince,
1106
AC_HELP_STRING([--enable-wince],
1107
[enable Win/CE support (where applicable)]),
1108
[doWince=$enableval], [doWince=no])
1109
AC_MSG_RESULT([$doWince])
1112
# Set the variable "system" to hold the name and version number
1117
# Require ranlib early so we can override it in special cases below.
1119
AC_REQUIRE([AC_PROG_RANLIB])
1121
# Set configuration options based on system name and version.
1122
# This is similar to Tcl's unix/tcl.m4 except that we've added a
1123
# "windows" case and removed some core-only vars.
1126
# default to '{$LIBS}' and set to "" on per-platform necessary basis
1127
SHLIB_LD_LIBS='${LIBS}'
1128
# When ld needs options to work in 64-bit mode, put them in
1129
# LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load]
1130
# is disabled by the user. [Bug 1016796]
1132
UNSHARED_LIB_SUFFIX=""
1133
# TEA specific: use PACKAGE_VERSION instead of VERSION
1134
TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`'
1135
ECHO_VERSION='`echo ${PACKAGE_VERSION}`'
1136
TCL_LIB_VERSIONS_OK=ok
1139
AS_IF([test "$GCC" = yes], [
1142
CFLAGS_WARNING="-Wall"
1143
], [CFLAGS_WARNING=""])
1144
dnl FIXME: Replace AC_CHECK_PROG with AC_CHECK_TOOL once cross compiling is fixed.
1145
dnl AC_CHECK_TOOL(AR, ar)
1146
AC_CHECK_PROG(AR, ar, ar)
1148
LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH"
1149
AS_IF([test "x$SHLIB_VERSION" = x],[SHLIB_VERSION="1.0"])
1153
# This is a 2-stage check to make sure we have the 64-bit SDK
1154
# We have to know where the SDK is installed.
1155
# This magic is based on MS Platform SDK for Win2003 SP1 - hobbs
1156
# MACHINE is IX86 for LINK, but this is used by the manifest,
1157
# which requires x86|amd64|ia64.
1159
if test "$do64bit" != "no" ; then
1160
if test "x${MSSDK}x" = "xx" ; then
1161
MSSDK="C:/Progra~1/Microsoft Platform SDK"
1163
MSSDK=`echo "$MSSDK" | sed -e 's!\\\!/!g'`
1167
MACHINE="AMD64" ; # default to AMD64 64-bit build
1168
PATH64="${MSSDK}/Bin/Win64/x86/AMD64"
1172
PATH64="${MSSDK}/Bin/Win64"
1175
if test ! -d "${PATH64}" ; then
1176
AC_MSG_WARN([Could not find 64-bit $MACHINE SDK to enable 64bit mode])
1177
AC_MSG_WARN([Ensure latest Platform SDK is installed])
1180
AC_MSG_RESULT([ Using 64-bit $MACHINE mode])
1185
if test "$doWince" != "no" ; then
1186
if test "$do64bit" != "no" ; then
1187
AC_MSG_ERROR([Windows/CE and 64-bit builds incompatible])
1189
if test "$GCC" = "yes" ; then
1190
AC_MSG_ERROR([Windows/CE and GCC builds incompatible])
1193
# Set defaults for common evc4/PPC2003 setup
1194
# Currently Tcl requires 300+, possibly 420+ for sockets
1195
CEVERSION=420; # could be 211 300 301 400 420 ...
1196
TARGETCPU=ARMV4; # could be ARMV4 ARM MIPS SH3 X86 ...
1197
ARCH=ARM; # could be ARM MIPS X86EM ...
1198
PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002"
1199
if test "$doWince" != "yes"; then
1200
# If !yes then the user specified something
1201
# Reset ARCH to allow user to skip specifying it
1203
eval `echo $doWince | awk -F, '{ \
1204
if (length([$]1)) { printf "CEVERSION=\"%s\"\n", [$]1; \
1205
if ([$]1 < 400) { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \
1206
if (length([$]2)) { printf "TARGETCPU=\"%s\"\n", toupper([$]2) }; \
1207
if (length([$]3)) { printf "ARCH=\"%s\"\n", toupper([$]3) }; \
1208
if (length([$]4)) { printf "PLATFORM=\"%s\"\n", [$]4 }; \
1210
if test "x${ARCH}" = "x" ; then
1214
OSVERSION=WCE$CEVERSION;
1215
if test "x${WCEROOT}" = "x" ; then
1216
WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0"
1217
if test ! -d "${WCEROOT}" ; then
1218
WCEROOT="C:/Program Files/Microsoft eMbedded Tools"
1221
if test "x${SDKROOT}" = "x" ; then
1222
SDKROOT="C:/Program Files/Windows CE Tools"
1223
if test ! -d "${SDKROOT}" ; then
1224
SDKROOT="C:/Windows CE Tools"
1227
WCEROOT=`echo "$WCEROOT" | sed -e 's!\\\!/!g'`
1228
SDKROOT=`echo "$SDKROOT" | sed -e 's!\\\!/!g'`
1229
if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \
1230
-o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then
1231
AC_MSG_ERROR([could not find PocketPC SDK or target compiler to enable WinCE mode [$CEVERSION,$TARGETCPU,$ARCH,$PLATFORM]])
1234
# We could PATH_NOSPACE these, but that's not important,
1235
# as long as we quote them when used.
1236
CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include"
1237
if test -d "${CEINCLUDE}/${TARGETCPU}" ; then
1238
CEINCLUDE="${CEINCLUDE}/${TARGETCPU}"
1240
CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}"
1244
if test "$GCC" != "yes" ; then
1245
if test "${SHARED_BUILD}" = "0" ; then
1251
if test "$do64bit" != "no" ; then
1252
# All this magic is necessary for the Win64 SDK RC1 - hobbs
1253
CC="\"${PATH64}/cl.exe\""
1254
CFLAGS="${CFLAGS} -I\"${MSSDK}/Include\" -I\"${MSSDK}/Include/crt\" -I\"${MSSDK}/Include/crt/sys\""
1255
RC="\"${MSSDK}/bin/rc.exe\""
1256
lflags="-nologo -MACHINE:${MACHINE} -LIBPATH:\"${MSSDK}/Lib/${MACHINE}\""
1257
LINKBIN="\"${PATH64}/link.exe\""
1258
CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d"
1259
CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}"
1260
# Avoid 'unresolved external symbol __security_cookie'
1261
# errors, c.f. http://support.microsoft.com/?id=894573
1262
TEA_ADD_LIBS([bufferoverflowU.lib])
1263
elif test "$doWince" != "no" ; then
1264
CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin"
1265
if test "${TARGETCPU}" = "X86"; then
1266
CC="\"${CEBINROOT}/cl.exe\""
1268
CC="\"${CEBINROOT}/cl${ARCH}.exe\""
1270
CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\""
1271
RC="\"${WCEROOT}/Common/EVC/bin/rc.exe\""
1272
arch=`echo ${ARCH} | awk '{print tolower([$]0)}'`
1273
defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS"
1274
if test "${SHARED_BUILD}" = "1" ; then
1275
# Static CE builds require static celib as well
1279
AC_DEFINE_UNQUOTED($i, 1, [WinCE def ]$i)
1281
AC_DEFINE_UNQUOTED(_WIN32_WCE, $CEVERSION, [_WIN32_WCE version])
1282
AC_DEFINE_UNQUOTED(UNDER_CE, $CEVERSION, [UNDER_CE version])
1283
CFLAGS_DEBUG="-nologo -Zi -Od"
1284
CFLAGS_OPTIMIZE="-nologo -Ox"
1285
lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'`
1286
lflags="-MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo"
1287
LINKBIN="\"${CEBINROOT}/link.exe\""
1293
CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d"
1294
CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}"
1298
if test "$GCC" = "yes"; then
1302
CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer"
1303
SHLIB_LD="$CC -shared"
1304
UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
1305
LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}"
1306
LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}"
1308
SHLIB_LD="${LINKBIN} -dll ${lflags}"
1309
# link -lib only works when -lib is the first arg
1310
STLIB_LD="${LINKBIN} -lib ${lflags}"
1311
UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib'
1313
# For information on what debugtype is most useful, see:
1314
# http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp
1316
# http://msdn2.microsoft.com/en-us/library/y0zzbyt4%28VS.80%29.aspx
1317
# This essentially turns it all on.
1318
LDFLAGS_DEBUG="-debug -debugtype:cv"
1319
LDFLAGS_OPTIMIZE="-release"
1320
if test "$doWince" != "no" ; then
1321
LDFLAGS_CONSOLE="-link ${lflags}"
1322
LDFLAGS_WINDOW=${LDFLAGS_CONSOLE}
1324
LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}"
1325
LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}"
1330
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll'
1332
TCL_LIB_VERSIONS_OK=nodots
1335
AS_IF([test "${TCL_THREADS}" = "1" -a "$GCC" != "yes"], [
1336
# AIX requires the _r compiler when gcc isn't being used
1342
# Make sure only first arg gets _r
1343
CC=`echo "$CC" | sed -e 's/^\([[^ ]]*\)/\1_r/'`
1346
AC_MSG_RESULT([Using $CC for compiling with threads])
1352
LD_LIBRARY_PATH_VAR="LIBPATH"
1354
# Check to enable 64-bit flags for compiler/linker
1355
AS_IF([test "$do64bit" = yes], [
1356
AS_IF([test "$GCC" = yes], [
1357
AC_MSG_WARN([64bit mode not supported with GCC on $system])
1360
CFLAGS="$CFLAGS -q64"
1362
RANLIB="${RANLIB} -X64"
1364
SHLIB_LD_FLAGS="-b64"
1368
AS_IF([test "`uname -m`" = ia64], [
1369
# AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC
1370
SHLIB_LD="/usr/ccs/bin/ld -G -z text"
1371
AS_IF([test "$GCC" = yes], [
1372
CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
1374
CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}'
1376
LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
1378
AS_IF([test "$GCC" = yes], [
1379
SHLIB_LD='${CC} -shared -Wl,-bexpall'
1381
SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bexpall -H512 -T512 -bnoentry"
1382
LDFLAGS="$LDFLAGS -brtl"
1384
SHLIB_LD="${SHLIB_LD} ${SHLIB_LD_FLAGS}"
1385
CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
1386
LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
1390
SHLIB_CFLAGS="-fPIC"
1391
SHLIB_LD='${CC} -nostart'
1394
#-----------------------------------------------------------
1395
# Check for inet_ntoa in -lbind, for BeOS (which also needs
1396
# -lsocket, even if the network functions are in -lnet which
1397
# is always linked to, for compatibility.
1398
#-----------------------------------------------------------
1399
AC_CHECK_LIB(bind, inet_ntoa, [LIBS="$LIBS -lbind -lsocket"])
1402
SHLIB_CFLAGS="-export-dynamic -fPIC"
1403
SHLIB_LD='${CC} -shared'
1405
LDFLAGS="$LDFLAGS -export-dynamic"
1411
SHLIB_LD='${CC} -shared'
1418
LDFLAGS="$LDFLAGS -Wl,--export-dynamic"
1419
SHLIB_CFLAGS="-fPIC"
1421
SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS}'
1422
AC_CHECK_LIB(network, inet_ntoa, [LIBS="$LIBS -lnetwork"])
1425
# Use updated header definitions where possible
1426
AC_DEFINE(_XOPEN_SOURCE_EXTENDED, 1, [Do we want to use the XOPEN network library?])
1427
# TEA specific: Needed by Tcl, but not most extensions
1428
#AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?])
1429
#LIBS="$LIBS -lxnet" # Use the XOPEN network library
1431
AS_IF([test "`uname -m`" = ia64], [
1433
# Use newer C++ library for C++ extensions
1434
#if test "$GCC" != "yes" ; then
1440
AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no)
1441
AS_IF([test "$tcl_ok" = yes], [
1442
LDFLAGS="$LDFLAGS -E"
1443
CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.'
1444
LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.'
1445
LD_LIBRARY_PATH_VAR="SHLIB_PATH"
1447
AS_IF([test "$GCC" = yes], [
1448
SHLIB_LD='${CC} -shared'
1449
LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
1452
# Users may want PA-RISC 1.1/2.0 portable code - needs HP cc
1453
#CFLAGS="$CFLAGS +DAportable"
1458
# Check to enable 64-bit flags for compiler/linker
1459
AS_IF([test "$do64bit" = "yes"], [
1460
AS_IF([test "$GCC" = yes], [
1461
case `${CC} -dumpmachine` in
1463
# 64-bit gcc in use. Fix flags for GNU ld.
1465
SHLIB_LD='${CC} -shared'
1466
AS_IF([test $doRpath = yes], [
1467
CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
1468
LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
1471
AC_MSG_WARN([64bit mode not supported with GCC on $system])
1476
CFLAGS="$CFLAGS +DD64"
1477
LDFLAGS_ARCH="+DD64"
1482
SHLIB_LD="ld -n32 -shared -rdata_shared"
1484
AS_IF([test $doRpath = yes], [
1485
CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
1486
LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'])
1487
AS_IF([test "$GCC" = yes], [
1488
CFLAGS="$CFLAGS -mabi=n32"
1489
LDFLAGS="$LDFLAGS -mabi=n32"
1493
# Use to build 6.2 compatible binaries on 6.3.
1494
CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS"
1497
CFLAGS="$CFLAGS -n32"
1500
LDFLAGS="$LDFLAGS -n32"
1505
SHLIB_LD="ld -n32 -shared -rdata_shared"
1507
AS_IF([test $doRpath = yes], [
1508
CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
1509
LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'])
1511
# Check to enable 64-bit flags for compiler/linker
1513
AS_IF([test "$do64bit" = yes], [
1514
AS_IF([test "$GCC" = yes], [
1515
AC_MSG_WARN([64bit mode not supported by gcc])
1518
SHLIB_LD="ld -64 -shared -rdata_shared"
1519
CFLAGS="$CFLAGS -64"
1525
SHLIB_CFLAGS="-fPIC"
1529
CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer"
1531
# TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS
1532
SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS_DEFAULT}'
1533
LDFLAGS="$LDFLAGS -Wl,--export-dynamic"
1534
AS_IF([test $doRpath = yes], [
1535
CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
1536
LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
1537
AS_IF([test "`uname -m`" = "alpha"], [CFLAGS="$CFLAGS -mieee"])
1538
AS_IF([test $do64bit = yes], [
1539
AC_CACHE_CHECK([if compiler accepts -m64 flag], tcl_cv_cc_m64, [
1541
CFLAGS="$CFLAGS -m64"
1542
AC_TRY_LINK(,, tcl_cv_cc_m64=yes, tcl_cv_cc_m64=no)
1543
CFLAGS=$hold_cflags])
1544
AS_IF([test $tcl_cv_cc_m64 = yes], [
1545
CFLAGS="$CFLAGS -m64"
1550
# The combo of gcc + glibc has a bug related to inlining of
1551
# functions like strtod(). The -fno-builtin flag should address
1552
# this problem but it does not work. The -fno-inline flag is kind
1553
# of overkill but it works. Disable inlining only when one of the
1554
# files in compat/*.c is being linked in.
1556
AS_IF([test x"${USE_COMPAT}" != x],[CFLAGS="$CFLAGS -fno-inline"])
1560
SHLIB_CFLAGS="-fPIC"
1563
SHLIB_LD='${CC} -shared'
1564
LDFLAGS="$LDFLAGS -Wl,--export-dynamic"
1567
AS_IF([test "`uname -m`" = "alpha"], [CFLAGS="$CFLAGS -mieee"])
1570
SHLIB_CFLAGS="-fPIC"
1573
SHLIB_LD='${CC} -shared'
1574
LD_FLAGS="-Wl,--export-dynamic"
1575
AS_IF([test $doRpath = yes], [
1576
CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
1577
LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
1580
SHLIB_CFLAGS="-fPIC"
1581
SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}'
1583
AS_IF([test $doRpath = yes], [
1584
CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
1585
LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
1586
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.${SHLIB_VERSION}'
1587
AC_CACHE_CHECK([for ELF], tcl_cv_ld_elf, [
1592
], tcl_cv_ld_elf=yes, tcl_cv_ld_elf=no)])
1593
AS_IF([test $tcl_cv_ld_elf = yes], [
1594
LDFLAGS=-Wl,-export-dynamic
1596
AS_IF([test "${TCL_THREADS}" = "1"], [
1597
# OpenBSD builds and links with -pthread, never -lpthread.
1598
LIBS=`echo $LIBS | sed s/-lpthread//`
1599
CFLAGS="$CFLAGS -pthread"
1600
#SHLIB_CFLAGS="$SHLIB_CFLAGS -pthread"
1602
# OpenBSD doesn't do version numbers with dots.
1603
UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
1604
TCL_LIB_VERSIONS_OK=nodots
1606
NetBSD-*|FreeBSD-[[3-4]].*)
1607
# FreeBSD 3.* and greater have ELF.
1608
# NetBSD 2.* has ELF and can use 'cc -shared' to build shared libs
1609
SHLIB_CFLAGS="-fPIC"
1610
SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}'
1612
LDFLAGS="$LDFLAGS -export-dynamic"
1613
AS_IF([test $doRpath = yes], [
1614
CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'])
1615
LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
1616
AS_IF([test "${TCL_THREADS}" = "1"], [
1617
# The -pthread needs to go in the CFLAGS, not LIBS
1618
LIBS=`echo $LIBS | sed s/-pthread//`
1619
CFLAGS="$CFLAGS -pthread"
1620
LDFLAGS="$LDFLAGS -pthread"
1624
# FreeBSD-3 doesn't handle version numbers with dots.
1625
UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
1626
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so'
1627
TCL_LIB_VERSIONS_OK=nodots
1632
# This configuration from FreeBSD Ports.
1633
SHLIB_CFLAGS="-fPIC"
1634
SHLIB_LD="${CC} -shared"
1635
TCL_SHLIB_LD_EXTRAS="-soname \$[@]"
1638
AS_IF([test $doRpath = yes], [
1639
CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
1640
LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'])
1641
AS_IF([test "${TCL_THREADS}" = "1"], [
1642
# The -pthread needs to go in the LDFLAGS, not LIBS
1643
LIBS=`echo $LIBS | sed s/-pthread//`
1644
CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
1645
LDFLAGS="$LDFLAGS $PTHREAD_LIBS"])
1646
# Version numbers are dot-stripped by system policy.
1647
TCL_TRIM_DOTS=`echo ${VERSION} | tr -d .`
1648
UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
1649
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1'
1650
TCL_LIB_VERSIONS_OK=nodots
1653
CFLAGS_OPTIMIZE="-Os"
1654
SHLIB_CFLAGS="-fno-common"
1655
# To avoid discrepancies between what headers configure sees during
1656
# preprocessing tests and compiling tests, move any -isysroot and
1657
# -mmacosx-version-min flags from CFLAGS to CPPFLAGS:
1658
CPPFLAGS="${CPPFLAGS} `echo " ${CFLAGS}" | \
1659
awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \
1660
if ([$]i~/^(isysroot|mmacosx-version-min)/) print "-"[$]i}'`"
1661
CFLAGS="`echo " ${CFLAGS}" | \
1662
awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \
1663
if (!([$]i~/^(isysroot|mmacosx-version-min)/)) print "-"[$]i}'`"
1664
AS_IF([test $do64bit = yes], [
1667
AC_CACHE_CHECK([if compiler accepts -arch ppc64 flag],
1668
tcl_cv_cc_arch_ppc64, [
1670
CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5"
1671
AC_TRY_LINK(,, tcl_cv_cc_arch_ppc64=yes,
1672
tcl_cv_cc_arch_ppc64=no)
1673
CFLAGS=$hold_cflags])
1674
AS_IF([test $tcl_cv_cc_arch_ppc64 = yes], [
1675
CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5"
1679
AC_CACHE_CHECK([if compiler accepts -arch x86_64 flag],
1680
tcl_cv_cc_arch_x86_64, [
1682
CFLAGS="$CFLAGS -arch x86_64"
1683
AC_TRY_LINK(,, tcl_cv_cc_arch_x86_64=yes,
1684
tcl_cv_cc_arch_x86_64=no)
1685
CFLAGS=$hold_cflags])
1686
AS_IF([test $tcl_cv_cc_arch_x86_64 = yes], [
1687
CFLAGS="$CFLAGS -arch x86_64"
1691
AC_MSG_WARN([Don't know how enable 64-bit on architecture `arch`]);;
1694
# Check for combined 32-bit and 64-bit fat build
1695
AS_IF([echo "$CFLAGS " |grep -E -q -- '-arch (ppc64|x86_64) ' \
1696
&& echo "$CFLAGS " |grep -E -q -- '-arch (ppc|i386) '], [
1699
# TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS
1700
SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS_DEFAULT}'
1701
AC_CACHE_CHECK([if ld accepts -single_module flag], tcl_cv_ld_single_module, [
1702
hold_ldflags=$LDFLAGS
1703
LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module"
1704
AC_TRY_LINK(, [int i;], tcl_cv_ld_single_module=yes, tcl_cv_ld_single_module=no)
1705
LDFLAGS=$hold_ldflags])
1706
AS_IF([test $tcl_cv_ld_single_module = yes], [
1707
SHLIB_LD="${SHLIB_LD} -Wl,-single_module"
1709
# TEA specific: link shlib with current and compatiblity version flags
1710
vers=`echo ${PACKAGE_VERSION} | sed -e 's/^\([[0-9]]\{1,5\}\)\(\(\.[[0-9]]\{1,3\}\)\{0,2\}\).*$/\1\2/p' -e d`
1711
SHLIB_LD="${SHLIB_LD} -current_version ${vers:-0} -compatibility_version ${vers:-0}"
1712
SHLIB_SUFFIX=".dylib"
1713
# Don't use -prebind when building for Mac OS X 10.4 or later only:
1714
AS_IF([test "`echo "${MACOSX_DEPLOYMENT_TARGET}" | awk -F '10\\.' '{print int([$]2)}'`" -lt 4 -a \
1715
"`echo "${CPPFLAGS}" | awk -F '-mmacosx-version-min=10\\.' '{print int([$]2)}'`" -lt 4], [
1716
LDFLAGS="$LDFLAGS -prebind"])
1717
LDFLAGS="$LDFLAGS -headerpad_max_install_names"
1718
AC_CACHE_CHECK([if ld accepts -search_paths_first flag],
1719
tcl_cv_ld_search_paths_first, [
1720
hold_ldflags=$LDFLAGS
1721
LDFLAGS="$LDFLAGS -Wl,-search_paths_first"
1722
AC_TRY_LINK(, [int i;], tcl_cv_ld_search_paths_first=yes,
1723
tcl_cv_ld_search_paths_first=no)
1724
LDFLAGS=$hold_ldflags])
1725
AS_IF([test $tcl_cv_ld_search_paths_first = yes], [
1726
LDFLAGS="$LDFLAGS -Wl,-search_paths_first"
1728
AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [
1729
AC_DEFINE(MODULE_SCOPE, [__private_extern__],
1730
[Compiler support for module scope symbols])
1731
tcl_cv_cc_visibility_hidden=yes
1735
LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH"
1736
# TEA specific: for combined 32 & 64 bit fat builds of Tk
1737
# extensions, verify that 64-bit build is possible.
1738
AS_IF([test "$fat_32_64" = yes && test -n "${TK_BIN_DIR}"], [
1739
AS_IF([test "${TEA_WINDOWINGSYSTEM}" = x11], [
1740
AC_CACHE_CHECK([for 64-bit X11], tcl_cv_lib_x11_64, [
1741
for v in CFLAGS CPPFLAGS LDFLAGS; do
1742
eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"'
1744
CPPFLAGS="$CPPFLAGS -I/usr/X11R6/include"
1745
LDFLAGS="$LDFLAGS -L/usr/X11R6/lib -lX11"
1746
AC_TRY_LINK([#include <X11/Xlib.h>], [XrmInitialize();],
1747
tcl_cv_lib_x11_64=yes, tcl_cv_lib_x11_64=no)
1748
for v in CFLAGS CPPFLAGS LDFLAGS; do
1749
eval $v'="$hold_'$v'"'
1752
AS_IF([test "${TEA_WINDOWINGSYSTEM}" = aqua], [
1753
AC_CACHE_CHECK([for 64-bit Tk], tcl_cv_lib_tk_64, [
1754
for v in CFLAGS CPPFLAGS LDFLAGS; do
1755
eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"'
1757
CPPFLAGS="$CPPFLAGS -DUSE_TCL_STUBS=1 -DUSE_TK_STUBS=1 ${TCL_INCLUDES} ${TK_INCLUDES}"
1758
LDFLAGS="$LDFLAGS ${TCL_STUB_LIB_SPEC} ${TK_STUB_LIB_SPEC}"
1759
AC_TRY_LINK([#include <tk.h>], [Tk_InitStubs(NULL, "", 0);],
1760
tcl_cv_lib_tk_64=yes, tcl_cv_lib_tk_64=no)
1761
for v in CFLAGS CPPFLAGS LDFLAGS; do
1762
eval $v'="$hold_'$v'"'
1765
# remove 64-bit arch flags from CFLAGS et al. if configuration
1766
# does not support 64-bit.
1767
AS_IF([test "$tcl_cv_lib_tk_64" = no -o "$tcl_cv_lib_x11_64" = no], [
1768
AC_MSG_NOTICE([Removing 64-bit architectures from compiler & linker flags])
1769
for v in CFLAGS CPPFLAGS LDFLAGS; do
1770
eval $v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"'
1775
CFLAGS_OPTIMIZE="" # Optimizer is buggy
1776
AC_DEFINE(_OE_SOCKETS, 1, # needed in sys/socket.h
1777
[Should OS/390 do the right thing with sockets?])
1782
AS_IF([test "$SHARED_BUILD" = 1], [
1783
SHLIB_LD='ld -shared -expect_unresolved "*"'
1785
SHLIB_LD='ld -non_shared -expect_unresolved "*"'
1788
AS_IF([test $doRpath = yes], [
1789
CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
1790
LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'])
1791
AS_IF([test "$GCC" = yes], [CFLAGS="$CFLAGS -mieee"], [
1792
CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee"])
1793
# see pthread_intro(3) for pthread support on osf1, k.furukawa
1794
AS_IF([test "${TCL_THREADS}" = 1], [
1795
CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE"
1796
CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64"
1797
LIBS=`echo $LIBS | sed s/-lpthreads//`
1798
AS_IF([test "$GCC" = yes], [
1799
LIBS="$LIBS -lpthread -lmach -lexc"
1801
CFLAGS="$CFLAGS -pthread"
1802
LDFLAGS="$LDFLAGS -pthread"
1808
# This may work for all QNX, but it was only reported for v6.
1809
SHLIB_CFLAGS="-fPIC"
1810
SHLIB_LD="ld -Bshareable -x"
1817
AS_IF([test "$GCC" = yes], [
1818
SHLIB_CFLAGS="-fPIC -melf"
1819
LDFLAGS="$LDFLAGS -melf -Wl,-Bexport"
1821
SHLIB_CFLAGS="-Kpic -belf"
1822
LDFLAGS="$LDFLAGS -belf -Wl,-Bexport"
1831
# Careful to not let 5.10+ fall into this case
1833
# Note: If _REENTRANT isn't defined, then Solaris
1834
# won't define thread-safe library routines.
1836
AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?])
1837
AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1,
1838
[Do we really want to follow the standard? Yes we do!])
1840
SHLIB_CFLAGS="-KPIC"
1842
AS_IF([test "$GCC" = yes], [
1843
SHLIB_LD='${CC} -shared'
1844
CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
1845
LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
1847
SHLIB_LD="/usr/ccs/bin/ld -G -z text"
1848
CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
1849
LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
1853
# Note: If _REENTRANT isn't defined, then Solaris
1854
# won't define thread-safe library routines.
1856
AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?])
1857
AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1,
1858
[Do we really want to follow the standard? Yes we do!])
1860
SHLIB_CFLAGS="-KPIC"
1862
# Check to enable 64-bit flags for compiler/linker
1863
AS_IF([test "$do64bit" = yes], [
1865
AS_IF([test "$arch" = "sparcv9 sparc"], [
1866
AS_IF([test "$GCC" = yes], [
1867
AS_IF([test "`${CC} -dumpversion | awk -F. '{print [$]1}'`" -lt 3], [
1868
AC_MSG_WARN([64bit mode not supported with GCC < 3.2 on $system])
1871
CFLAGS="$CFLAGS -m64 -mcpu=v9"
1872
LDFLAGS="$LDFLAGS -m64 -mcpu=v9"
1873
SHLIB_CFLAGS="-fPIC"
1877
AS_IF([test "$do64bitVIS" = yes], [
1878
CFLAGS="$CFLAGS -xarch=v9a"
1879
LDFLAGS_ARCH="-xarch=v9a"
1881
CFLAGS="$CFLAGS -xarch=v9"
1882
LDFLAGS_ARCH="-xarch=v9"
1884
# Solaris 64 uses this as well
1885
#LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64"
1887
], [AS_IF([test "$arch" = "amd64 i386"], [
1888
AS_IF([test "$GCC" = yes], [
1890
SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*)
1892
CFLAGS="$CFLAGS -m64"
1893
LDFLAGS="$LDFLAGS -m64";;
1895
AC_MSG_WARN([64bit mode not supported with GCC on $system]);;
1900
SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*)
1901
CFLAGS="$CFLAGS -m64"
1902
LDFLAGS="$LDFLAGS -m64";;
1904
CFLAGS="$CFLAGS -xarch=amd64"
1905
LDFLAGS="$LDFLAGS -xarch=amd64";;
1908
], [AC_MSG_WARN([64bit mode not supported for $arch])])])
1912
AS_IF([test "$GCC" = yes], [
1913
SHLIB_LD='${CC} -shared'
1914
CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
1915
LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
1916
AS_IF([test "$do64bit_ok" = yes], [
1917
AS_IF([test "$arch" = "sparcv9 sparc"], [
1918
# We need to specify -static-libgcc or we need to
1919
# add the path to the sparv9 libgcc.
1920
# JH: static-libgcc is necessary for core Tcl, but may
1921
# not be necessary for extensions.
1922
SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc"
1923
# for finding sparcv9 libgcc, get the regular libgcc
1924
# path, remove so name and append 'sparcv9'
1925
#v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..."
1926
#CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir"
1927
], [AS_IF([test "$arch" = "amd64 i386"], [
1928
# JH: static-libgcc is necessary for core Tcl, but may
1929
# not be necessary for extensions.
1930
SHLIB_LD="$SHLIB_LD -m64 -static-libgcc"
1935
SunOS-5.[[1-9]][[0-9]]*)
1936
# TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS
1937
SHLIB_LD='${CC} -G -z text ${LDFLAGS_DEFAULT}';;
1939
SHLIB_LD='/usr/ccs/bin/ld -G -z text';;
1941
CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
1942
LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
1947
AS_IF([test "$do64bit" = yes -a "$do64bit_ok" = no], [
1948
AC_MSG_WARN([64bit support being disabled -- don't know magic for this platform])
1951
dnl # Add any CPPFLAGS set in the environment to our CFLAGS, but delay doing so
1952
dnl # until the end of configure, as configure's compile and link tests use
1953
dnl # both CPPFLAGS and CFLAGS (unlike our compile and link) but configure's
1954
dnl # preprocessing tests use only CPPFLAGS.
1955
AC_CONFIG_COMMANDS_PRE([CFLAGS="${CFLAGS} ${CPPFLAGS}"; CPPFLAGS=""])
1957
# Add in the arch flags late to ensure it wasn't removed.
1958
# Not necessary in TEA, but this is aligned with core
1959
LDFLAGS="$LDFLAGS $LDFLAGS_ARCH"
1961
# If we're running gcc, then change the C flags for compiling shared
1962
# libraries to the right flags for gcc, instead of those for the
1963
# standard manufacturer compiler.
1965
AS_IF([test "$GCC" = yes], [
1971
NetBSD-*|FreeBSD-*|OpenBSD-*) ;;
1975
*) SHLIB_CFLAGS="-fPIC" ;;
1978
AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [
1979
AC_DEFINE(MODULE_SCOPE, [extern],
1980
[No Compiler support for module scope symbols])
1981
AC_DEFINE(NO_VIZ, [], [No visibility hidden passed to zlib?])
1984
AS_IF([test "$SHARED_LIB_SUFFIX" = ""], [
1985
# TEA specific: use PACKAGE_VERSION instead of VERSION
1986
SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}'])
1987
AS_IF([test "$UNSHARED_LIB_SUFFIX" = ""], [
1988
# TEA specific: use PACKAGE_VERSION instead of VERSION
1989
UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a'])
1991
AC_SUBST(CFLAGS_DEBUG)
1992
AC_SUBST(CFLAGS_OPTIMIZE)
1993
AC_SUBST(CFLAGS_WARNING)
1998
AC_SUBST(SHLIB_LD_LIBS)
1999
AC_SUBST(SHLIB_CFLAGS)
2001
AC_SUBST(LD_LIBRARY_PATH_VAR)
2003
# These must be called after we do the basic CFLAGS checks and
2004
# verify any possible 64-bit or similar switches are necessary
2009
#--------------------------------------------------------------------
2012
# Determine which interface to use to talk to the serial port.
2013
# Note that #include lines must begin in leftmost column for
2014
# some compilers to recognize them as preprocessor directives,
2015
# and some build environments have stdin not pointing at a
2016
# pseudo-terminal (usually /dev/null instead.)
2023
# Defines only one of the following vars:
2029
#--------------------------------------------------------------------
2031
AC_DEFUN([TEA_SERIAL_PORT], [
2032
AC_CHECK_HEADERS(sys/modem.h)
2033
AC_CACHE_CHECK([termios vs. termio vs. sgtty], tcl_cv_api_serial, [
2035
#include <termios.h>
2039
if (tcgetattr(0, &t) == 0) {
2041
t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB;
2045
}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
2046
if test $tcl_cv_api_serial = no ; then
2052
if (ioctl(0, TCGETA, &t) == 0) {
2053
t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB;
2057
}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
2059
if test $tcl_cv_api_serial = no ; then
2065
if (ioctl(0, TIOCGETP, &t) == 0) {
2067
t.sg_flags |= ODDP | EVENP | RAW;
2071
}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
2073
if test $tcl_cv_api_serial = no ; then
2075
#include <termios.h>
2080
if (tcgetattr(0, &t) == 0
2081
|| errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
2083
t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB;
2087
}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
2089
if test $tcl_cv_api_serial = no; then
2096
if (ioctl(0, TCGETA, &t) == 0
2097
|| errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
2098
t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB;
2102
}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
2104
if test $tcl_cv_api_serial = no; then
2111
if (ioctl(0, TIOCGETP, &t) == 0
2112
|| errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
2114
t.sg_flags |= ODDP | EVENP | RAW;
2118
}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none)
2120
case $tcl_cv_api_serial in
2121
termios) AC_DEFINE(USE_TERMIOS, 1, [Use the termios API for serial lines]);;
2122
termio) AC_DEFINE(USE_TERMIO, 1, [Use the termio API for serial lines]);;
2123
sgtty) AC_DEFINE(USE_SGTTY, 1, [Use the sgtty API for serial lines]);;
2127
#--------------------------------------------------------------------
2128
# TEA_MISSING_POSIX_HEADERS
2130
# Supply substitutes for missing POSIX header files. Special
2132
# - stdlib.h doesn't define strtol, strtoul, or
2133
# strtod in some versions of SunOS
2134
# - some versions of string.h don't declare procedures such
2142
# Defines some of the following vars:
2146
# HAVE_LIMITS_H or NO_LIMITS_H
2155
# tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and
2157
#--------------------------------------------------------------------
2159
AC_DEFUN([TEA_MISSING_POSIX_HEADERS], [
2160
AC_CACHE_CHECK([dirent.h], tcl_cv_dirent_h, [
2161
AC_TRY_LINK([#include <sys/types.h>
2162
#include <dirent.h>], [
2163
#ifndef _POSIX_SOURCE
2166
* Generate compilation error to make the test fail: Lynx headers
2167
* are only valid if really in the POSIX environment.
2170
missing_procedure();
2174
struct dirent *entryPtr;
2176
d = opendir("foobar");
2177
entryPtr = readdir(d);
2178
p = entryPtr->d_name;
2180
], tcl_cv_dirent_h=yes, tcl_cv_dirent_h=no)])
2182
if test $tcl_cv_dirent_h = no; then
2183
AC_DEFINE(NO_DIRENT_H, 1, [Do we have <dirent.h>?])
2187
AC_CHECK_HEADER(errno.h, , [AC_DEFINE(NO_ERRNO_H, 1, [Do we have <errno.h>?])])
2188
AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H, 1, [Do we have <float.h>?])])
2189
AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H, 1, [Do we have <values.h>?])])
2190
AC_CHECK_HEADER(limits.h,
2191
[AC_DEFINE(HAVE_LIMITS_H, 1, [Do we have <limits.h>?])],
2192
[AC_DEFINE(NO_LIMITS_H, 1, [Do we have <limits.h>?])])
2193
AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0)
2194
AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0)
2195
AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0)
2196
AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0)
2197
if test $tcl_ok = 0; then
2198
AC_DEFINE(NO_STDLIB_H, 1, [Do we have <stdlib.h>?])
2200
AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0)
2201
AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0)
2202
AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0)
2204
# See also memmove check below for a place where NO_STRING_H can be
2207
if test $tcl_ok = 0; then
2208
AC_DEFINE(NO_STRING_H, 1, [Do we have <string.h>?])
2211
AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H, 1, [Do we have <sys/wait.h>?])])
2212
AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H, 1, [Do we have <dlfcn.h>?])])
2214
# OS/390 lacks sys/param.h (and doesn't need it, by chance).
2215
AC_HAVE_HEADERS(sys/param.h)
2218
#--------------------------------------------------------------------
2221
# Locate the X11 header files and the X11 library archive. Try
2222
# the ac_path_x macro first, but if it doesn't find the X stuff
2223
# (e.g. because there's no xmkmf program) then check through
2224
# a list of possible directories. Under some conditions the
2225
# autoconf macro will return an include directory that contains
2226
# no include files, so double-check its result just to be safe.
2228
# This should be called after TEA_CONFIG_CFLAGS as setting the
2229
# LIBS line can confuse some configure macro magic.
2236
# Sets the following vars:
2239
# PKG_LIBS (appends to)
2241
#--------------------------------------------------------------------
2243
AC_DEFUN([TEA_PATH_X], [
2244
if test "${TEA_WINDOWINGSYSTEM}" = "x11" ; then
2249
AC_DEFUN([TEA_PATH_UNIX_X], [
2252
if test "$no_x" = ""; then
2253
if test "$x_includes" = ""; then
2254
AC_TRY_CPP([#include <X11/XIntrinsic.h>], , not_really_there="yes")
2256
if test ! -r $x_includes/X11/Intrinsic.h; then
2257
not_really_there="yes"
2261
if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then
2262
AC_MSG_CHECKING([for X11 header files])
2263
found_xincludes="no"
2264
AC_TRY_CPP([#include <X11/Intrinsic.h>], found_xincludes="yes", found_xincludes="no")
2265
if test "$found_xincludes" = "no"; then
2266
dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include"
2268
if test -r $i/X11/Intrinsic.h; then
2271
found_xincludes="yes"
2277
if test "$x_includes" != ""; then
2278
XINCLUDES="-I$x_includes"
2279
found_xincludes="yes"
2282
if test "$found_xincludes" = "no"; then
2283
AC_MSG_RESULT([couldn't find any!])
2286
if test "$no_x" = yes; then
2287
AC_MSG_CHECKING([for X11 libraries])
2289
dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib"
2291
if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl -o -r $i/libX11.dylib; then
2299
if test "$x_libraries" = ""; then
2302
XLIBSW="-L$x_libraries -lX11"
2305
if test "$XLIBSW" = nope ; then
2306
AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow)
2308
if test "$XLIBSW" = nope ; then
2309
AC_MSG_RESULT([could not find any! Using -lX11.])
2313
if test x"${XLIBSW}" != x ; then
2314
PKG_LIBS="${PKG_LIBS} ${XLIBSW}"
2318
#--------------------------------------------------------------------
2319
# TEA_BLOCKING_STYLE
2321
# The statements below check for systems where POSIX-style
2322
# non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented.
2323
# On these systems (mostly older ones), use the old BSD-style
2324
# FIONBIO approach instead.
2331
# Defines some of the following vars:
2337
#--------------------------------------------------------------------
2339
AC_DEFUN([TEA_BLOCKING_STYLE], [
2340
AC_CHECK_HEADERS(sys/ioctl.h)
2341
AC_CHECK_HEADERS(sys/filio.h)
2343
AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O])
2346
AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?])
2347
AC_MSG_RESULT([FIONBIO])
2350
AC_MSG_RESULT([O_NONBLOCK])
2355
#--------------------------------------------------------------------
2358
# Checks how the system deals with time.h, what time structures
2359
# are used on the system, and what fields the structures have.
2366
# Defines some of the following vars:
2372
#--------------------------------------------------------------------
2374
AC_DEFUN([TEA_TIME_HANDLER], [
2375
AC_CHECK_HEADERS(sys/time.h)
2379
AC_CHECK_FUNCS(gmtime_r localtime_r)
2381
AC_CACHE_CHECK([tm_tzadj in struct tm], tcl_cv_member_tm_tzadj, [
2382
AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_tzadj;],
2383
tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no)])
2384
if test $tcl_cv_member_tm_tzadj = yes ; then
2385
AC_DEFINE(HAVE_TM_TZADJ, 1, [Should we use the tm_tzadj field of struct tm?])
2388
AC_CACHE_CHECK([tm_gmtoff in struct tm], tcl_cv_member_tm_gmtoff, [
2389
AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_gmtoff;],
2390
tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no)])
2391
if test $tcl_cv_member_tm_gmtoff = yes ; then
2392
AC_DEFINE(HAVE_TM_GMTOFF, 1, [Should we use the tm_gmtoff field of struct tm?])
2396
# Its important to include time.h in this check, as some systems
2397
# (like convex) have timezone functions, etc.
2399
AC_CACHE_CHECK([long timezone variable], tcl_cv_timezone_long, [
2400
AC_TRY_COMPILE([#include <time.h>],
2401
[extern long timezone;
2404
tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no)])
2405
if test $tcl_cv_timezone_long = yes ; then
2406
AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?])
2409
# On some systems (eg IRIX 6.2), timezone is a time_t and not a long.
2411
AC_CACHE_CHECK([time_t timezone variable], tcl_cv_timezone_time, [
2412
AC_TRY_COMPILE([#include <time.h>],
2413
[extern time_t timezone;
2416
tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no)])
2417
if test $tcl_cv_timezone_time = yes ; then
2418
AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?])
2423
#--------------------------------------------------------------------
2426
# Under Solaris 2.4, strtod returns the wrong value for the
2427
# terminating character under some conditions. Check for this
2428
# and if the problem exists use a substitute procedure
2429
# "fixstrtod" (provided by Tcl) that corrects the error.
2430
# Also, on Compaq's Tru64 Unix 5.0,
2431
# strtod(" ") returns 0.0 instead of a failure to convert.
2438
# Might defines some of the following vars:
2439
# strtod (=fixstrtod)
2441
#--------------------------------------------------------------------
2443
AC_DEFUN([TEA_BUGGY_STRTOD], [
2444
AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0)
2445
if test "$tcl_strtod" = 1; then
2446
AC_CACHE_CHECK([for Solaris2.4/Tru64 strtod bugs], tcl_cv_strtod_buggy,[
2448
extern double strtod();
2450
char *infString="Inf", *nanString="NaN", *spaceString=" ";
2453
value = strtod(infString, &term);
2454
if ((term != infString) && (term[-1] == 0)) {
2457
value = strtod(nanString, &term);
2458
if ((term != nanString) && (term[-1] == 0)) {
2461
value = strtod(spaceString, &term);
2462
if (term == (spaceString+1)) {
2466
}], tcl_cv_strtod_buggy=ok, tcl_cv_strtod_buggy=buggy,
2467
tcl_cv_strtod_buggy=buggy)])
2468
if test "$tcl_cv_strtod_buggy" = buggy; then
2469
AC_LIBOBJ([fixstrtod])
2471
AC_DEFINE(strtod, fixstrtod, [Do we want to use the strtod() in compat?])
2476
#--------------------------------------------------------------------
2479
# Search for the libraries needed to link the Tcl shell.
2480
# Things like the math library (-lm) and socket stuff (-lsocket vs.
2481
# -lnsl) are dealt with here.
2484
# Requires the following vars to be set in the Makefile:
2485
# DL_LIBS (not in TEA, only needed in core)
2491
# Subst's the following var:
2495
# Might append to the following vars:
2498
# Might define the following vars:
2501
#--------------------------------------------------------------------
2503
AC_DEFUN([TEA_TCL_LINK_LIBS], [
2504
#--------------------------------------------------------------------
2505
# On a few very rare systems, all of the libm.a stuff is
2506
# already in libc.a. Set compiler flags accordingly.
2507
# Also, Linux requires the "ieee" library for math to work
2508
# right (and it must appear before "-lm").
2509
#--------------------------------------------------------------------
2511
AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm")
2512
AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"])
2514
#--------------------------------------------------------------------
2515
# Interactive UNIX requires -linet instead of -lsocket, plus it
2516
# needs net/errno.h to define the socket-related error codes.
2517
#--------------------------------------------------------------------
2519
AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"])
2520
AC_CHECK_HEADER(net/errno.h, [
2521
AC_DEFINE(HAVE_NET_ERRNO_H, 1, [Do we have <net/errno.h>?])])
2523
#--------------------------------------------------------------------
2524
# Check for the existence of the -lsocket and -lnsl libraries.
2525
# The order here is important, so that they end up in the right
2526
# order in the command line generated by make. Here are some
2527
# special considerations:
2528
# 1. Use "connect" and "accept" to check for -lsocket, and
2529
# "gethostbyname" to check for -lnsl.
2530
# 2. Use each function name only once: can't redo a check because
2531
# autoconf caches the results of the last check and won't redo it.
2532
# 3. Use -lnsl and -lsocket only if they supply procedures that
2533
# aren't already present in the normal libraries. This is because
2534
# IRIX 5.2 has libraries, but they aren't needed and they're
2535
# bogus: they goof up name resolution if used.
2536
# 4. On some SVR4 systems, can't use -lsocket without -lnsl too.
2537
# To get around this problem, check for both libraries together
2538
# if -lsocket doesn't work by itself.
2539
#--------------------------------------------------------------------
2542
AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1)
2543
if test "$tcl_checkSocket" = 1; then
2544
AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt,
2545
LIBS="$LIBS -lsocket", tcl_checkBoth=1)])
2547
if test "$tcl_checkBoth" = 1; then
2549
LIBS="$LIBS -lsocket -lnsl"
2550
AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs])
2552
AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname,
2553
[LIBS="$LIBS -lnsl"])])
2555
# TEA specific: Don't perform the eval of the libraries here because
2556
# DL_LIBS won't be set until we call TEA_CONFIG_CFLAGS
2558
TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}'
2563
#--------------------------------------------------------------------
2564
# TEA_TCL_EARLY_FLAGS
2566
# Check for what flags are needed to be passed so the correct OS
2567
# features are available.
2574
# Might define the following vars:
2576
# _LARGEFILE64_SOURCE
2577
# _LARGEFILE_SOURCE64
2579
#--------------------------------------------------------------------
2581
AC_DEFUN([TEA_TCL_EARLY_FLAG],[
2582
AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]),
2583
AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no,
2584
AC_TRY_COMPILE([[#define ]$1[ 1
2586
[tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes,
2587
[tcl_cv_flag_]translit($1,[A-Z],[a-z])=no)))
2588
if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then
2589
AC_DEFINE($1, 1, [Add the ]$1[ flag when building])
2590
tcl_flags="$tcl_flags $1"
2594
AC_DEFUN([TEA_TCL_EARLY_FLAGS],[
2595
AC_MSG_CHECKING([for required early compiler flags])
2597
TEA_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include <stdlib.h>],
2598
[char *p = (char *)strtoll; char *q = (char *)strtoull;])
2599
TEA_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include <sys/stat.h>],
2600
[struct stat64 buf; int i = stat64("/", &buf);])
2601
TEA_TCL_EARLY_FLAG(_LARGEFILE_SOURCE64,[#include <sys/stat.h>],
2602
[char *p = (char *)open64;])
2603
if test "x${tcl_flags}" = "x" ; then
2604
AC_MSG_RESULT([none])
2606
AC_MSG_RESULT([${tcl_flags}])
2610
#--------------------------------------------------------------------
2611
# TEA_TCL_64BIT_FLAGS
2613
# Check for what is defined in the way of 64-bit features.
2620
# Might define the following vars:
2621
# TCL_WIDE_INT_IS_LONG
2623
# HAVE_STRUCT_DIRENT64
2624
# HAVE_STRUCT_STAT64
2627
#--------------------------------------------------------------------
2629
AC_DEFUN([TEA_TCL_64BIT_FLAGS], [
2630
AC_MSG_CHECKING([for 64-bit integer type])
2631
AC_CACHE_VAL(tcl_cv_type_64bit,[
2632
tcl_cv_type_64bit=none
2633
# See if the compiler knows natively about __int64
2634
AC_TRY_COMPILE(,[__int64 value = (__int64) 0;],
2635
tcl_type_64bit=__int64, tcl_type_64bit="long long")
2636
# See if we should use long anyway Note that we substitute in the
2637
# type that is our current guess for a 64-bit type inside this check
2638
# program, so it should be modified only carefully...
2639
AC_TRY_COMPILE(,[switch (0) {
2640
case 1: case (sizeof(]${tcl_type_64bit}[)==sizeof(long)): ;
2641
}],tcl_cv_type_64bit=${tcl_type_64bit})])
2642
if test "${tcl_cv_type_64bit}" = none ; then
2643
AC_DEFINE(TCL_WIDE_INT_IS_LONG, 1, [Are wide integers to be implemented with C 'long's?])
2644
AC_MSG_RESULT([using long])
2645
elif test "${tcl_cv_type_64bit}" = "__int64" \
2646
-a "${TEA_PLATFORM}" = "windows" ; then
2647
# TEA specific: We actually want to use the default tcl.h checks in
2648
# this case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER*
2649
AC_MSG_RESULT([using Tcl header defaults])
2651
AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit},
2652
[What type should be used to define wide integers?])
2653
AC_MSG_RESULT([${tcl_cv_type_64bit}])
2655
# Now check for auxiliary declarations
2656
AC_CACHE_CHECK([for struct dirent64], tcl_cv_struct_dirent64,[
2657
AC_TRY_COMPILE([#include <sys/types.h>
2658
#include <sys/dirent.h>],[struct dirent64 p;],
2659
tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)])
2660
if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then
2661
AC_DEFINE(HAVE_STRUCT_DIRENT64, 1, [Is 'struct dirent64' in <sys/types.h>?])
2664
AC_CACHE_CHECK([for struct stat64], tcl_cv_struct_stat64,[
2665
AC_TRY_COMPILE([#include <sys/stat.h>],[struct stat64 p;
2667
tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)])
2668
if test "x${tcl_cv_struct_stat64}" = "xyes" ; then
2669
AC_DEFINE(HAVE_STRUCT_STAT64, 1, [Is 'struct stat64' in <sys/stat.h>?])
2672
AC_CHECK_FUNCS(open64 lseek64)
2673
AC_MSG_CHECKING([for off64_t])
2674
AC_CACHE_VAL(tcl_cv_type_off64_t,[
2675
AC_TRY_COMPILE([#include <sys/types.h>],[off64_t offset;
2677
tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)])
2678
dnl Define HAVE_TYPE_OFF64_T only when the off64_t type and the
2679
dnl functions lseek64 and open64 are defined.
2680
if test "x${tcl_cv_type_off64_t}" = "xyes" && \
2681
test "x${ac_cv_func_lseek64}" = "xyes" && \
2682
test "x${ac_cv_func_open64}" = "xyes" ; then
2683
AC_DEFINE(HAVE_TYPE_OFF64_T, 1, [Is off64_t in <sys/types.h>?])
2684
AC_MSG_RESULT([yes])
2692
## Here ends the standard Tcl configuration bits and starts the
2693
## TEA specific functions
2696
#------------------------------------------------------------------------
2699
# Init various Tcl Extension Architecture (TEA) variables.
2700
# This should be the first called TEA_* macro.
2707
# Defines and substs the following vars:
2713
# TEA_PLATFORM (windows or unix)
2715
# "cygpath" is used on windows to generate native path names for include
2716
# files. These variables should only be used with the compiler and linker
2717
# since they generate native path names.
2720
# Select the executable extension based on the host type. This
2721
# is a lightweight replacement for AC_EXEEXT that doesn't require
2723
#------------------------------------------------------------------------
2725
AC_DEFUN([TEA_INIT], [
2726
# TEA extensions pass this us the version of TEA they think they
2727
# are compatible with.
2730
AC_MSG_CHECKING([for correct TEA configuration])
2731
if test x"${PACKAGE_NAME}" = x ; then
2733
The PACKAGE_NAME variable must be defined by your TEA configure.in])
2735
if test x"$1" = x ; then
2737
TEA version not specified.])
2738
elif test "$1" != "${TEA_VERSION}" ; then
2739
AC_MSG_RESULT([warning: requested TEA version "$1", have "${TEA_VERSION}"])
2741
AC_MSG_RESULT([ok (TEA ${TEA_VERSION})])
2743
case "`uname -s`" in
2744
*win32*|*WIN32*|*MINGW32_*)
2745
AC_CHECK_PROG(CYGPATH, cygpath, cygpath -w, echo)
2747
TEA_PLATFORM="windows"
2752
# TEA_PLATFORM is determined later in LOAD_TCLCONFIG
2761
# Check if exec_prefix is set. If not use fall back to prefix.
2762
# Note when adjusted, so that TEA_PREFIX can correct for this.
2763
# This is needed for recursive configures, since autoconf propagates
2764
# $prefix, but not $exec_prefix (doh!).
2765
if test x$exec_prefix = xNONE ; then
2766
exec_prefix_default=yes
2770
AC_MSG_NOTICE([configuring ${PACKAGE_NAME} ${PACKAGE_VERSION}])
2775
# This package name must be replaced statically for AC_SUBST to work
2776
AC_SUBST(PKG_LIB_FILE)
2777
# Substitute STUB_LIB_FILE in case package creates a stub library too.
2778
AC_SUBST(PKG_STUB_LIB_FILE)
2780
# We AC_SUBST these here to ensure they are subst'ed,
2781
# in case the user doesn't call TEA_ADD_...
2782
AC_SUBST(PKG_STUB_SOURCES)
2783
AC_SUBST(PKG_STUB_OBJECTS)
2784
AC_SUBST(PKG_TCL_SOURCES)
2785
AC_SUBST(PKG_HEADERS)
2786
AC_SUBST(PKG_INCLUDES)
2788
AC_SUBST(PKG_CFLAGS)
2791
#------------------------------------------------------------------------
2792
# TEA_ADD_SOURCES --
2794
# Specify one or more source files. Users should check for
2795
# the right platform before adding to their list.
2796
# It is not important to specify the directory, as long as it is
2797
# in the generic, win or unix subdirectory of $(srcdir).
2800
# one or more file names
2804
# Defines and substs the following vars:
2807
#------------------------------------------------------------------------
2808
AC_DEFUN([TEA_ADD_SOURCES], [
2814
PKG_SOURCES="$PKG_SOURCES $i"
2815
PKG_OBJECTS="$PKG_OBJECTS $i"
2818
# check for existence - allows for generic/win/unix VPATH
2819
# To add more dirs here (like 'src'), you have to update VPATH
2820
# in Makefile.in as well
2821
if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \
2822
-a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \
2823
-a ! -f "${srcdir}/macosx/$i" \
2825
AC_MSG_ERROR([could not find source file '$i'])
2827
PKG_SOURCES="$PKG_SOURCES $i"
2828
# this assumes it is in a VPATH dir
2830
# handle user calling this before or after TEA_SETUP_COMPILER
2831
if test x"${OBJEXT}" != x ; then
2832
j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}"
2834
j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}"
2836
PKG_OBJECTS="$PKG_OBJECTS $j"
2840
AC_SUBST(PKG_SOURCES)
2841
AC_SUBST(PKG_OBJECTS)
2844
#------------------------------------------------------------------------
2845
# TEA_ADD_STUB_SOURCES --
2847
# Specify one or more source files. Users should check for
2848
# the right platform before adding to their list.
2849
# It is not important to specify the directory, as long as it is
2850
# in the generic, win or unix subdirectory of $(srcdir).
2853
# one or more file names
2857
# Defines and substs the following vars:
2860
#------------------------------------------------------------------------
2861
AC_DEFUN([TEA_ADD_STUB_SOURCES], [
2864
# check for existence - allows for generic/win/unix VPATH
2865
if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \
2866
-a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \
2867
-a ! -f "${srcdir}/macosx/$i" \
2869
AC_MSG_ERROR([could not find stub source file '$i'])
2871
PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i"
2872
# this assumes it is in a VPATH dir
2874
# handle user calling this before or after TEA_SETUP_COMPILER
2875
if test x"${OBJEXT}" != x ; then
2876
j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}"
2878
j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}"
2880
PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j"
2882
AC_SUBST(PKG_STUB_SOURCES)
2883
AC_SUBST(PKG_STUB_OBJECTS)
2886
#------------------------------------------------------------------------
2887
# TEA_ADD_TCL_SOURCES --
2889
# Specify one or more Tcl source files. These should be platform
2890
# independent runtime files.
2893
# one or more file names
2897
# Defines and substs the following vars:
2899
#------------------------------------------------------------------------
2900
AC_DEFUN([TEA_ADD_TCL_SOURCES], [
2903
# check for existence, be strict because it is installed
2904
if test ! -f "${srcdir}/$i" ; then
2905
AC_MSG_ERROR([could not find tcl source file '${srcdir}/$i'])
2907
PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i"
2909
AC_SUBST(PKG_TCL_SOURCES)
2912
#------------------------------------------------------------------------
2913
# TEA_ADD_HEADERS --
2915
# Specify one or more source headers. Users should check for
2916
# the right platform before adding to their list.
2919
# one or more file names
2923
# Defines and substs the following vars:
2925
#------------------------------------------------------------------------
2926
AC_DEFUN([TEA_ADD_HEADERS], [
2929
# check for existence, be strict because it is installed
2930
if test ! -f "${srcdir}/$i" ; then
2931
AC_MSG_ERROR([could not find header file '${srcdir}/$i'])
2933
PKG_HEADERS="$PKG_HEADERS $i"
2935
AC_SUBST(PKG_HEADERS)
2938
#------------------------------------------------------------------------
2939
# TEA_ADD_INCLUDES --
2941
# Specify one or more include dirs. Users should check for
2942
# the right platform before adding to their list.
2945
# one or more file names
2949
# Defines and substs the following vars:
2951
#------------------------------------------------------------------------
2952
AC_DEFUN([TEA_ADD_INCLUDES], [
2955
PKG_INCLUDES="$PKG_INCLUDES $i"
2957
AC_SUBST(PKG_INCLUDES)
2960
#------------------------------------------------------------------------
2963
# Specify one or more libraries. Users should check for
2964
# the right platform before adding to their list. For Windows,
2965
# libraries provided in "foo.lib" format will be converted to
2966
# "-lfoo" when using GCC (mingw).
2969
# one or more file names
2973
# Defines and substs the following vars:
2975
#------------------------------------------------------------------------
2976
AC_DEFUN([TEA_ADD_LIBS], [
2979
if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then
2980
# Convert foo.lib to -lfoo for GCC. No-op if not *.lib
2981
i=`echo "$i" | sed -e 's/^\([[^-]].*\)\.lib[$]/-l\1/i'`
2983
PKG_LIBS="$PKG_LIBS $i"
2988
#------------------------------------------------------------------------
2991
# Specify one or more CFLAGS. Users should check for
2992
# the right platform before adding to their list.
2995
# one or more file names
2999
# Defines and substs the following vars:
3001
#------------------------------------------------------------------------
3002
AC_DEFUN([TEA_ADD_CFLAGS], [
3003
PKG_CFLAGS="$PKG_CFLAGS $@"
3004
AC_SUBST(PKG_CFLAGS)
3007
#------------------------------------------------------------------------
3008
# TEA_ADD_CLEANFILES --
3010
# Specify one or more CLEANFILES.
3013
# one or more file names to clean target
3017
# Appends to CLEANFILES, already defined for subst in LOAD_TCLCONFIG
3018
#------------------------------------------------------------------------
3019
AC_DEFUN([TEA_ADD_CLEANFILES], [
3020
CLEANFILES="$CLEANFILES $@"
3023
#------------------------------------------------------------------------
3026
# Handle the --prefix=... option by defaulting to what Tcl gave
3033
# If --prefix or --exec-prefix was not specified, $prefix and
3034
# $exec_prefix will be set to the values given to Tcl when it was
3036
#------------------------------------------------------------------------
3037
AC_DEFUN([TEA_PREFIX], [
3038
if test "${prefix}" = "NONE"; then
3040
if test x"${TCL_PREFIX}" != x; then
3041
AC_MSG_NOTICE([--prefix defaulting to TCL_PREFIX ${TCL_PREFIX}])
3042
prefix=${TCL_PREFIX}
3044
AC_MSG_NOTICE([--prefix defaulting to /usr/local])
3048
if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \
3049
-o x"${exec_prefix_default}" = x"yes" ; then
3050
if test x"${TCL_EXEC_PREFIX}" != x; then
3051
AC_MSG_NOTICE([--exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}])
3052
exec_prefix=${TCL_EXEC_PREFIX}
3054
AC_MSG_NOTICE([--exec-prefix defaulting to ${prefix}])
3060
#------------------------------------------------------------------------
3061
# TEA_SETUP_COMPILER_CC --
3063
# Do compiler checks the way we want. This is just a replacement
3064
# for AC_PROG_CC in TEA configure.in files to make them cleaner.
3071
# Sets up CC var and other standard bits we need to make executables.
3072
#------------------------------------------------------------------------
3073
AC_DEFUN([TEA_SETUP_COMPILER_CC], [
3074
# Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE)
3075
# in this macro, they need to go into TEA_SETUP_COMPILER instead.
3077
# If the user did not set CFLAGS, set it now to keep
3078
# the AC_PROG_CC macro from adding "-g -O2".
3079
if test "${CFLAGS+set}" != "set" ; then
3088
#--------------------------------------------------------------------
3089
# Checks to see if the make program sets the $MAKE variable.
3090
#--------------------------------------------------------------------
3094
#--------------------------------------------------------------------
3096
#--------------------------------------------------------------------
3100
#--------------------------------------------------------------------
3101
# Determines the correct binary file extension (.o, .obj, .exe etc.)
3102
#--------------------------------------------------------------------
3108
#------------------------------------------------------------------------
3109
# TEA_SETUP_COMPILER --
3111
# Do compiler checks that use the compiler. This must go after
3112
# TEA_SETUP_COMPILER_CC, which does the actual compiler check.
3119
# Sets up CC var and other standard bits we need to make executables.
3120
#------------------------------------------------------------------------
3121
AC_DEFUN([TEA_SETUP_COMPILER], [
3122
# Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here.
3123
AC_REQUIRE([TEA_SETUP_COMPILER_CC])
3125
#------------------------------------------------------------------------
3126
# If we're using GCC, see if the compiler understands -pipe. If so, use it.
3127
# It makes compiling go faster. (This is only a performance feature.)
3128
#------------------------------------------------------------------------
3130
if test -z "$no_pipe" -a -n "$GCC"; then
3131
AC_CACHE_CHECK([if the compiler understands -pipe],
3133
hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -pipe"
3134
AC_TRY_COMPILE(,, tcl_cv_cc_pipe=yes, tcl_cv_cc_pipe=no)
3135
CFLAGS=$hold_cflags])
3136
if test $tcl_cv_cc_pipe = yes; then
3137
CFLAGS="$CFLAGS -pipe"
3141
#--------------------------------------------------------------------
3142
# Common compiler flag setup
3143
#--------------------------------------------------------------------
3146
if test "${TEA_PLATFORM}" = "unix" ; then
3148
TEA_MISSING_POSIX_HEADERS
3149
# Let the user call this, because if it triggers, they will
3150
# need a compat/strtod.c that is correct. Users can also
3151
# use Tcl_GetDouble(FromObj) instead.
3156
#------------------------------------------------------------------------
3159
# Generate a line that can be used to build a shared/unshared library
3160
# in a platform independent manner.
3169
# Defines the following vars:
3170
# CFLAGS - Done late here to note disturb other AC macros
3171
# MAKE_LIB - Command to execute to build the Tcl library;
3172
# differs depending on whether or not Tcl is being
3173
# compiled as a shared library.
3174
# MAKE_SHARED_LIB Makefile rule for building a shared library
3175
# MAKE_STATIC_LIB Makefile rule for building a static library
3176
# MAKE_STUB_LIB Makefile rule for building a stub library
3177
# VC_MANIFEST_EMBED_DLL Makefile rule for embedded VC manifest in DLL
3178
# VC_MANIFEST_EMBED_EXE Makefile rule for embedded VC manifest in EXE
3179
#------------------------------------------------------------------------
3181
AC_DEFUN([TEA_MAKE_LIB], [
3182
if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then
3183
MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_OBJECTS)"
3184
MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\[$]@ \$(PKG_OBJECTS)"
3185
AC_EGREP_CPP([manifest needed], [
3186
#if defined(_MSC_VER) && _MSC_VER >= 1400
3187
print("manifest needed")
3190
# Could do a CHECK_PROG for mt, but should always be with MSVC8+
3191
VC_MANIFEST_EMBED_DLL="if test -f \[$]@.manifest ; then mt.exe -nologo -manifest \[$]@.manifest -outputresource:\[$]@\;2 ; fi"
3192
VC_MANIFEST_EMBED_EXE="if test -f \[$]@.manifest ; then mt.exe -nologo -manifest \[$]@.manifest -outputresource:\[$]@\;1 ; fi"
3193
MAKE_SHARED_LIB="${MAKE_SHARED_LIB} ; ${VC_MANIFEST_EMBED_DLL}"
3194
TEA_ADD_CLEANFILES([*.manifest])
3196
MAKE_STUB_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_STUB_OBJECTS)"
3198
MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(PKG_OBJECTS)"
3199
MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}"
3200
MAKE_STUB_LIB="\${STLIB_LD} \[$]@ \$(PKG_STUB_OBJECTS)"
3203
if test "${SHARED_BUILD}" = "1" ; then
3204
MAKE_LIB="${MAKE_SHARED_LIB} "
3206
MAKE_LIB="${MAKE_STATIC_LIB} "
3209
#--------------------------------------------------------------------
3210
# Shared libraries and static libraries have different names.
3211
# Use the double eval to make sure any variables in the suffix is
3212
# substituted. (@@@ Might not be necessary anymore)
3213
#--------------------------------------------------------------------
3215
if test "${TEA_PLATFORM}" = "windows" ; then
3216
if test "${SHARED_BUILD}" = "1" ; then
3217
# We force the unresolved linking of symbols that are really in
3218
# the private libraries of Tcl and Tk.
3219
SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\""
3220
if test x"${TK_BIN_DIR}" != x ; then
3221
SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\""
3223
eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${SHARED_LIB_SUFFIX}"
3225
eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}"
3227
# Some packages build their own stubs libraries
3228
eval eval "PKG_STUB_LIB_FILE=${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}"
3229
if test "$GCC" = "yes"; then
3230
PKG_STUB_LIB_FILE=lib${PKG_STUB_LIB_FILE}
3232
# These aren't needed on Windows (either MSVC or gcc)
3236
RANLIB_STUB="${RANLIB}"
3237
if test "${SHARED_BUILD}" = "1" ; then
3238
SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}"
3239
if test x"${TK_BIN_DIR}" != x ; then
3240
SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}"
3242
eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${SHARED_LIB_SUFFIX}"
3245
eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}"
3247
# Some packages build their own stubs libraries
3248
eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}"
3251
# These are escaped so that only CFLAGS is picked up at configure time.
3252
# The other values will be substituted at make time.
3253
CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}"
3254
if test "${SHARED_BUILD}" = "1" ; then
3255
CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}"
3259
AC_SUBST(MAKE_SHARED_LIB)
3260
AC_SUBST(MAKE_STATIC_LIB)
3261
AC_SUBST(MAKE_STUB_LIB)
3262
AC_SUBST(RANLIB_STUB)
3263
AC_SUBST(VC_MANIFEST_EMBED_DLL)
3264
AC_SUBST(VC_MANIFEST_EMBED_EXE)
3267
#------------------------------------------------------------------------
3270
# Compute the name of an existing object library located in libdir
3271
# from the given base name and produce the appropriate linker flags.
3274
# basename The base name of the library without version
3275
# numbers, extensions, or "lib" prefixes.
3276
# extra_dir Extra directory in which to search for the
3277
# library. This location is used first, then
3278
# $prefix/$exec-prefix, then some defaults.
3281
# TEA_INIT and TEA_PREFIX must be called first.
3285
# Defines the following vars:
3286
# ${basename}_LIB_NAME The computed library name.
3287
# ${basename}_LIB_SPEC The computed linker flags.
3288
#------------------------------------------------------------------------
3290
AC_DEFUN([TEA_LIB_SPEC], [
3291
AC_MSG_CHECKING([for $1 library])
3293
# Look in exec-prefix for the library (defined by TEA_PREFIX).
3295
tea_lib_name_dir="${exec_prefix}/lib"
3297
# Or in a user-specified location.
3299
if test x"$2" != x ; then
3300
tea_extra_lib_dir=$2
3302
tea_extra_lib_dir=NONE
3306
`ls -dr ${tea_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \
3307
`ls -dr ${tea_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \
3308
`ls -dr ${tea_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \
3309
`ls -dr ${tea_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \
3310
`ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \
3311
`ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \
3312
`ls -dr /usr/lib64/$1[[0-9]]*.lib 2>/dev/null ` \
3313
`ls -dr /usr/lib64/lib$1[[0-9]]* 2>/dev/null ` \
3314
`ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \
3315
`ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do
3316
if test -f "$i" ; then
3317
tea_lib_name_dir=`dirname $i`
3318
$1_LIB_NAME=`basename $i`
3324
if test "${TEA_PLATFORM}" = "windows"; then
3325
$1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME} 2>/dev/null`\"
3327
# Strip off the leading "lib" and trailing ".a" or ".so"
3329
tea_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//' -e 's/\.so.*//'`
3330
$1_LIB_SPEC="-L${tea_lib_name_dir} -l${tea_lib_name_lib}"
3333
if test "x${$1_LIB_NAME}" = x ; then
3334
AC_MSG_ERROR([not found])
3336
AC_MSG_RESULT([${$1_LIB_SPEC}])
3340
#------------------------------------------------------------------------
3341
# TEA_PRIVATE_TCL_HEADERS --
3343
# Locate the private Tcl include files
3348
# TCL_SRC_DIR Assumes that TEA_LOAD_TCLCONFIG has
3349
# already been called.
3353
# Substs the following vars:
3354
# TCL_TOP_DIR_NATIVE
3356
#------------------------------------------------------------------------
3358
AC_DEFUN([TEA_PRIVATE_TCL_HEADERS], [
3359
# Allow for --with-tclinclude to take effect and define ${ac_cv_c_tclh}
3360
AC_REQUIRE([TEA_PUBLIC_TCL_HEADERS])
3361
AC_MSG_CHECKING([for Tcl private include files])
3363
TCL_SRC_DIR_NATIVE=`${CYGPATH} ${TCL_SRC_DIR}`
3364
TCL_TOP_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}\"
3366
# Check to see if tcl<Plat>Port.h isn't already with the public headers
3367
# Don't look for tclInt.h because that resides with tcl.h in the core
3368
# sources, but the <plat>Port headers are in a different directory
3369
if test "${TEA_PLATFORM}" = "windows" -a \
3370
-f "${ac_cv_c_tclh}/tclWinPort.h"; then
3371
result="private headers found with public headers"
3372
elif test "${TEA_PLATFORM}" = "unix" -a \
3373
-f "${ac_cv_c_tclh}/tclUnixPort.h"; then
3374
result="private headers found with public headers"
3376
TCL_GENERIC_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/generic\"
3377
if test "${TEA_PLATFORM}" = "windows"; then
3378
TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/win\"
3380
TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/unix\"
3382
# Overwrite the previous TCL_INCLUDES as this should capture both
3383
# public and private headers in the same set.
3384
# We want to ensure these are substituted so as not to require
3385
# any *_NATIVE vars be defined in the Makefile
3386
TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}"
3387
if test "`uname -s`" = "Darwin"; then
3388
# If Tcl was built as a framework, attempt to use
3389
# the framework's Headers and PrivateHeaders directories
3392
if test -d "${TCL_BIN_DIR}/Headers" -a \
3393
-d "${TCL_BIN_DIR}/PrivateHeaders"; then
3394
TCL_INCLUDES="-I\"${TCL_BIN_DIR}/Headers\" -I\"${TCL_BIN_DIR}/PrivateHeaders\" ${TCL_INCLUDES}"
3396
TCL_INCLUDES="${TCL_INCLUDES} ${TCL_INCLUDE_SPEC} `echo "${TCL_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`"
3400
result="Using ${TCL_INCLUDES}"
3402
if test ! -f "${TCL_SRC_DIR}/generic/tclInt.h" ; then
3403
AC_MSG_ERROR([Cannot find private header tclInt.h in ${TCL_SRC_DIR}])
3405
result="Using srcdir found in tclConfig.sh: ${TCL_SRC_DIR}"
3409
AC_SUBST(TCL_TOP_DIR_NATIVE)
3411
AC_SUBST(TCL_INCLUDES)
3412
AC_MSG_RESULT([${result}])
3415
#------------------------------------------------------------------------
3416
# TEA_PUBLIC_TCL_HEADERS --
3418
# Locate the installed public Tcl header files
3424
# CYGPATH must be set
3428
# Adds a --with-tclinclude switch to configure.
3431
# Substs the following vars:
3433
#------------------------------------------------------------------------
3435
AC_DEFUN([TEA_PUBLIC_TCL_HEADERS], [
3436
AC_MSG_CHECKING([for Tcl public headers])
3438
AC_ARG_WITH(tclinclude, [ --with-tclinclude directory containing the public Tcl header files], with_tclinclude=${withval})
3440
AC_CACHE_VAL(ac_cv_c_tclh, [
3441
# Use the value from --with-tclinclude, if it was given
3443
if test x"${with_tclinclude}" != x ; then
3444
if test -f "${with_tclinclude}/tcl.h" ; then
3445
ac_cv_c_tclh=${with_tclinclude}
3447
AC_MSG_ERROR([${with_tclinclude} directory does not contain tcl.h])
3451
if test "`uname -s`" = "Darwin"; then
3452
# If Tcl was built as a framework, attempt to use
3453
# the framework's Headers directory
3456
list="`ls -d ${TCL_BIN_DIR}/Headers 2>/dev/null`"
3461
# Look in the source dir only if Tcl is not installed,
3462
# and in that situation, look there before installed locations.
3463
if test -f "${TCL_BIN_DIR}/Makefile" ; then
3464
list="$list `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`"
3467
# Check order: pkg --prefix location, Tcl's --prefix location,
3468
# relative to directory of tclConfig.sh.
3470
eval "temp_includedir=${includedir}"
3472
`ls -d ${temp_includedir} 2>/dev/null` \
3473
`ls -d ${TCL_PREFIX}/include 2>/dev/null` \
3474
`ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`"
3475
if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then
3476
list="$list /usr/local/include /usr/include"
3477
if test x"${TCL_INCLUDE_SPEC}" != x ; then
3478
d=`echo "${TCL_INCLUDE_SPEC}" | sed -e 's/^-I//'`
3479
list="$list `ls -d ${d} 2>/dev/null`"
3483
if test -f "$i/tcl.h" ; then
3491
# Print a message based on how we determined the include path
3493
if test x"${ac_cv_c_tclh}" = x ; then
3494
AC_MSG_ERROR([tcl.h not found. Please specify its location with --with-tclinclude])
3496
AC_MSG_RESULT([${ac_cv_c_tclh}])
3499
# Convert to a native path and substitute into the output files.
3501
INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}`
3503
TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
3505
AC_SUBST(TCL_INCLUDES)
3508
#------------------------------------------------------------------------
3509
# TEA_PRIVATE_TK_HEADERS --
3511
# Locate the private Tk include files
3516
# TK_SRC_DIR Assumes that TEA_LOAD_TKCONFIG has
3517
# already been called.
3521
# Substs the following vars:
3523
#------------------------------------------------------------------------
3525
AC_DEFUN([TEA_PRIVATE_TK_HEADERS], [
3526
# Allow for --with-tkinclude to take effect and define ${ac_cv_c_tkh}
3527
AC_REQUIRE([TEA_PUBLIC_TK_HEADERS])
3528
AC_MSG_CHECKING([for Tk private include files])
3530
TK_SRC_DIR_NATIVE=`${CYGPATH} ${TK_SRC_DIR}`
3531
TK_TOP_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}\"
3533
# Check to see if tk<Plat>Port.h isn't already with the public headers
3534
# Don't look for tkInt.h because that resides with tk.h in the core
3535
# sources, but the <plat>Port headers are in a different directory
3536
if test "${TEA_PLATFORM}" = "windows" -a \
3537
-f "${ac_cv_c_tkh}/tkWinPort.h"; then
3538
result="private headers found with public headers"
3539
elif test "${TEA_PLATFORM}" = "unix" -a \
3540
-f "${ac_cv_c_tkh}/tkUnixPort.h"; then
3541
result="private headers found with public headers"
3543
TK_GENERIC_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/generic\"
3544
TK_XLIB_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/xlib\"
3545
if test "${TEA_PLATFORM}" = "windows"; then
3546
TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/win\"
3548
TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/unix\"
3550
# Overwrite the previous TK_INCLUDES as this should capture both
3551
# public and private headers in the same set.
3552
# We want to ensure these are substituted so as not to require
3553
# any *_NATIVE vars be defined in the Makefile
3554
TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}"
3555
# Detect and add ttk subdir
3556
if test -d "${TK_SRC_DIR}/generic/ttk"; then
3557
TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/generic/ttk\""
3559
if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then
3560
TK_INCLUDES="${TK_INCLUDES} -I\"${TK_XLIB_DIR_NATIVE}\""
3562
if test "${TEA_WINDOWINGSYSTEM}" = "aqua"; then
3563
TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/macosx\""
3565
if test "`uname -s`" = "Darwin"; then
3566
# If Tk was built as a framework, attempt to use
3567
# the framework's Headers and PrivateHeaders directories
3570
if test -d "${TK_BIN_DIR}/Headers" -a \
3571
-d "${TK_BIN_DIR}/PrivateHeaders"; then
3572
TK_INCLUDES="-I\"${TK_BIN_DIR}/Headers\" -I\"${TK_BIN_DIR}/PrivateHeaders\" ${TK_INCLUDES}"
3574
TK_INCLUDES="${TK_INCLUDES} ${TK_INCLUDE_SPEC} `echo "${TK_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`"
3578
result="Using ${TK_INCLUDES}"
3580
if test ! -f "${TK_SRC_DIR}/generic/tkInt.h" ; then
3581
AC_MSG_ERROR([Cannot find private header tkInt.h in ${TK_SRC_DIR}])
3583
result="Using srcdir found in tkConfig.sh: ${TK_SRC_DIR}"
3587
AC_SUBST(TK_TOP_DIR_NATIVE)
3588
AC_SUBST(TK_XLIB_DIR_NATIVE)
3590
AC_SUBST(TK_INCLUDES)
3591
AC_MSG_RESULT([${result}])
3594
#------------------------------------------------------------------------
3595
# TEA_PUBLIC_TK_HEADERS --
3597
# Locate the installed public Tk header files
3603
# CYGPATH must be set
3607
# Adds a --with-tkinclude switch to configure.
3610
# Substs the following vars:
3612
#------------------------------------------------------------------------
3614
AC_DEFUN([TEA_PUBLIC_TK_HEADERS], [
3615
AC_MSG_CHECKING([for Tk public headers])
3617
AC_ARG_WITH(tkinclude, [ --with-tkinclude directory containing the public Tk header files], with_tkinclude=${withval})
3619
AC_CACHE_VAL(ac_cv_c_tkh, [
3620
# Use the value from --with-tkinclude, if it was given
3622
if test x"${with_tkinclude}" != x ; then
3623
if test -f "${with_tkinclude}/tk.h" ; then
3624
ac_cv_c_tkh=${with_tkinclude}
3626
AC_MSG_ERROR([${with_tkinclude} directory does not contain tk.h])
3630
if test "`uname -s`" = "Darwin"; then
3631
# If Tk was built as a framework, attempt to use
3632
# the framework's Headers directory.
3635
list="`ls -d ${TK_BIN_DIR}/Headers 2>/dev/null`"
3640
# Look in the source dir only if Tk is not installed,
3641
# and in that situation, look there before installed locations.
3642
if test -f "${TK_BIN_DIR}/Makefile" ; then
3643
list="$list `ls -d ${TK_SRC_DIR}/generic 2>/dev/null`"
3646
# Check order: pkg --prefix location, Tk's --prefix location,
3647
# relative to directory of tkConfig.sh, Tcl's --prefix location,
3648
# relative to directory of tclConfig.sh.
3650
eval "temp_includedir=${includedir}"
3652
`ls -d ${temp_includedir} 2>/dev/null` \
3653
`ls -d ${TK_PREFIX}/include 2>/dev/null` \
3654
`ls -d ${TK_BIN_DIR}/../include 2>/dev/null` \
3655
`ls -d ${TCL_PREFIX}/include 2>/dev/null` \
3656
`ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`"
3657
if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then
3658
list="$list /usr/local/include /usr/include"
3659
if test x"${TK_INCLUDE_SPEC}" != x ; then
3660
d=`echo "${TK_INCLUDE_SPEC}" | sed -e 's/^-I//'`
3661
list="$list `ls -d ${d} 2>/dev/null`"
3665
if test -f "$i/tk.h" ; then
3673
# Print a message based on how we determined the include path
3675
if test x"${ac_cv_c_tkh}" = x ; then
3676
AC_MSG_ERROR([tk.h not found. Please specify its location with --with-tkinclude])
3678
AC_MSG_RESULT([${ac_cv_c_tkh}])
3681
# Convert to a native path and substitute into the output files.
3683
INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}`
3685
TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
3687
AC_SUBST(TK_INCLUDES)
3689
if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then
3690
# On Windows and Aqua, we need the X compat headers
3691
AC_MSG_CHECKING([for X11 header files])
3692
if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then
3693
INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`"
3694
TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
3695
AC_SUBST(TK_XINCLUDES)
3697
AC_MSG_RESULT([${INCLUDE_DIR_NATIVE}])
3701
#------------------------------------------------------------------------
3702
# TEA_PATH_CONFIG --
3704
# Locate the ${1}Config.sh file and perform a sanity check on
3705
# the ${1} compile flags. These are used by packages like
3706
# [incr Tk] that load *Config.sh files from more than Tcl and Tk.
3713
# Adds the following arguments to configure:
3716
# Defines the following vars:
3717
# $1_BIN_DIR Full path to the directory containing
3718
# the $1Config.sh file
3719
#------------------------------------------------------------------------
3721
AC_DEFUN([TEA_PATH_CONFIG], [
3723
# Ok, lets find the $1 configuration
3724
# First, look for one uninstalled.
3725
# the alternative search directory is invoked by --with-$1
3728
if test x"${no_$1}" = x ; then
3729
# we reset no_$1 in case something fails here
3731
AC_ARG_WITH($1, [ --with-$1 directory containing $1 configuration ($1Config.sh)], with_$1config=${withval})
3732
AC_MSG_CHECKING([for $1 configuration])
3733
AC_CACHE_VAL(ac_cv_c_$1config,[
3735
# First check to see if --with-$1 was specified.
3736
if test x"${with_$1config}" != x ; then
3737
case ${with_$1config} in
3739
if test -f ${with_$1config}; then
3740
AC_MSG_WARN([--with-$1 argument should refer to directory containing $1Config.sh, not to $1Config.sh itself])
3741
with_$1config=`echo ${with_$1config} | sed 's!/$1Config\.sh$!!'`
3744
if test -f "${with_$1config}/$1Config.sh" ; then
3745
ac_cv_c_$1config=`(cd ${with_$1config}; pwd)`
3747
AC_MSG_ERROR([${with_$1config} directory doesn't contain $1Config.sh])
3751
# then check for a private $1 installation
3752
if test x"${ac_cv_c_$1config}" = x ; then
3755
`ls -dr ../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
3756
`ls -dr ../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
3757
`ls -dr ../$1*[[0-9]].[[0-9]] 2>/dev/null` \
3758
`ls -dr ../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
3760
`ls -dr ../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
3761
`ls -dr ../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
3762
`ls -dr ../../$1*[[0-9]].[[0-9]] 2>/dev/null` \
3763
`ls -dr ../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
3765
`ls -dr ../../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
3766
`ls -dr ../../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
3767
`ls -dr ../../../$1*[[0-9]].[[0-9]] 2>/dev/null` \
3768
`ls -dr ../../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
3770
`ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
3771
`ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
3772
`ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]] 2>/dev/null` \
3773
`ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
3775
if test -f "$i/$1Config.sh" ; then
3776
ac_cv_c_$1config=`(cd $i; pwd)`
3779
if test -f "$i/unix/$1Config.sh" ; then
3780
ac_cv_c_$1config=`(cd $i/unix; pwd)`
3786
# check in a few common install locations
3787
if test x"${ac_cv_c_$1config}" = x ; then
3788
for i in `ls -d ${libdir} 2>/dev/null` \
3789
`ls -d ${exec_prefix}/lib 2>/dev/null` \
3790
`ls -d ${prefix}/lib 2>/dev/null` \
3791
`ls -d /usr/local/lib 2>/dev/null` \
3792
`ls -d /usr/contrib/lib 2>/dev/null` \
3793
`ls -d /usr/lib 2>/dev/null` \
3794
`ls -d /usr/lib64 2>/dev/null` \
3796
if test -f "$i/$1Config.sh" ; then
3797
ac_cv_c_$1config=`(cd $i; pwd)`
3804
if test x"${ac_cv_c_$1config}" = x ; then
3805
$1_BIN_DIR="# no $1 configs found"
3806
AC_MSG_WARN([Cannot find $1 configuration definitions])
3810
$1_BIN_DIR=${ac_cv_c_$1config}
3811
AC_MSG_RESULT([found $$1_BIN_DIR/$1Config.sh])
3816
#------------------------------------------------------------------------
3817
# TEA_LOAD_CONFIG --
3819
# Load the $1Config.sh file
3823
# Requires the following vars to be set:
3828
# Subst the following vars:
3833
#------------------------------------------------------------------------
3835
AC_DEFUN([TEA_LOAD_CONFIG], [
3836
AC_MSG_CHECKING([for existence of ${$1_BIN_DIR}/$1Config.sh])
3838
if test -f "${$1_BIN_DIR}/$1Config.sh" ; then
3839
AC_MSG_RESULT([loading])
3840
. "${$1_BIN_DIR}/$1Config.sh"
3842
AC_MSG_RESULT([file not found])
3846
# If the $1_BIN_DIR is the build directory (not the install directory),
3847
# then set the common variable name to the value of the build variables.
3848
# For example, the variable $1_LIB_SPEC will be set to the value
3849
# of $1_BUILD_LIB_SPEC. An extension should make use of $1_LIB_SPEC
3850
# instead of $1_BUILD_LIB_SPEC since it will work with both an
3851
# installed and uninstalled version of Tcl.
3854
if test -f "${$1_BIN_DIR}/Makefile" ; then
3855
AC_MSG_WARN([Found Makefile - using build library specs for $1])
3856
$1_LIB_SPEC=${$1_BUILD_LIB_SPEC}
3857
$1_STUB_LIB_SPEC=${$1_BUILD_STUB_LIB_SPEC}
3858
$1_STUB_LIB_PATH=${$1_BUILD_STUB_LIB_PATH}
3859
$1_INCLUDE_SPEC=${$1_BUILD_INCLUDE_SPEC}
3860
$1_LIBRARY_PATH=${$1_LIBRARY_PATH}
3863
AC_SUBST($1_VERSION)
3864
AC_SUBST($1_BIN_DIR)
3865
AC_SUBST($1_SRC_DIR)
3867
AC_SUBST($1_LIB_FILE)
3868
AC_SUBST($1_LIB_SPEC)
3870
AC_SUBST($1_STUB_LIB_FILE)
3871
AC_SUBST($1_STUB_LIB_SPEC)
3872
AC_SUBST($1_STUB_LIB_PATH)
3874
# Allow the caller to prevent this auto-check by specifying any 2nd arg
3875
AS_IF([test "x$2" = x], [
3876
# Check both upper and lower-case variants
3877
# If a dev wanted non-stubs libs, this function could take an option
3878
# to not use _STUB in the paths below
3879
AS_IF([test "x${$1_STUB_LIB_SPEC}" = x],
3880
[TEA_LOAD_CONFIG_LIB(translit($1,[a-z],[A-Z])_STUB)],
3881
[TEA_LOAD_CONFIG_LIB($1_STUB)])
3885
#------------------------------------------------------------------------
3886
# TEA_LOAD_CONFIG_LIB --
3888
# Helper function to load correct library from another extension's
3889
# ${PACKAGE}Config.sh.
3892
# Adds to LIBS the appropriate extension library
3894
#------------------------------------------------------------------------
3895
AC_DEFUN([TEA_LOAD_CONFIG_LIB], [
3896
AC_MSG_CHECKING([For $1 library for LIBS])
3897
# This simplifies the use of stub libraries by automatically adding
3898
# the stub lib to your path. Normally this would add to SHLIB_LD_LIBS,
3899
# but this is called before CONFIG_CFLAGS. More importantly, this adds
3900
# to PKG_LIBS, which becomes LIBS, and that is only used by SHLIB_LD.
3901
if test "x${$1_LIB_SPEC}" != "x" ; then
3902
if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes" ; then
3903
TEA_ADD_LIBS([\"`${CYGPATH} ${$1_LIB_PATH}`\"])
3904
AC_MSG_RESULT([using $1_LIB_PATH ${$1_LIB_PATH}])
3906
TEA_ADD_LIBS([${$1_LIB_SPEC}])
3907
AC_MSG_RESULT([using $1_LIB_SPEC ${$1_LIB_SPEC}])
3910
AC_MSG_RESULT([file not found])
3914
#------------------------------------------------------------------------
3915
# TEA_EXPORT_CONFIG --
3917
# Define the data to insert into the ${PACKAGE}Config.sh file
3921
# Requires the following vars to be set:
3925
# Subst the following vars:
3927
#------------------------------------------------------------------------
3929
AC_DEFUN([TEA_EXPORT_CONFIG], [
3930
#--------------------------------------------------------------------
3931
# These are for $1Config.sh
3932
#--------------------------------------------------------------------
3934
# pkglibdir must be a fully qualified path and (not ${exec_prefix}/lib)
3935
eval pkglibdir="[$]{libdir}/$1${PACKAGE_VERSION}"
3936
if test "${TCL_LIB_VERSIONS_OK}" = "ok"; then
3937
eval $1_LIB_FLAG="-l$1${PACKAGE_VERSION}${DBGX}"
3938
eval $1_STUB_LIB_FLAG="-l$1stub${PACKAGE_VERSION}${DBGX}"
3940
eval $1_LIB_FLAG="-l$1`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}"
3941
eval $1_STUB_LIB_FLAG="-l$1stub`echo ${PACKAGE_VERSION} | tr -d .`${DBGX}"
3943
$1_BUILD_LIB_SPEC="-L`pwd` ${$1_LIB_FLAG}"
3944
$1_LIB_SPEC="-L${pkglibdir} ${$1_LIB_FLAG}"
3945
$1_BUILD_STUB_LIB_SPEC="-L`pwd` [$]{$1_STUB_LIB_FLAG}"
3946
$1_STUB_LIB_SPEC="-L${pkglibdir} [$]{$1_STUB_LIB_FLAG}"
3947
$1_BUILD_STUB_LIB_PATH="`pwd`/[$]{PKG_STUB_LIB_FILE}"
3948
$1_STUB_LIB_PATH="${pkglibdir}/[$]{PKG_STUB_LIB_FILE}"
3950
AC_SUBST($1_BUILD_LIB_SPEC)
3951
AC_SUBST($1_LIB_SPEC)
3952
AC_SUBST($1_BUILD_STUB_LIB_SPEC)
3953
AC_SUBST($1_STUB_LIB_SPEC)
3954
AC_SUBST($1_BUILD_STUB_LIB_PATH)
3955
AC_SUBST($1_STUB_LIB_PATH)
3957
AC_SUBST(MAJOR_VERSION)
3958
AC_SUBST(MINOR_VERSION)
3959
AC_SUBST(PATCHLEVEL)
3963
#------------------------------------------------------------------------
3966
# Locate Keuchel's celib emulation layer for targeting Win/CE
3973
# Adds the following arguments to configure:
3976
# Defines the following vars:
3977
# CELIB_DIR Full path to the directory containing
3978
# the include and platform lib files
3979
#------------------------------------------------------------------------
3981
AC_DEFUN([TEA_PATH_CELIB], [
3982
# First, look for one uninstalled.
3983
# the alternative search directory is invoked by --with-celib
3985
if test x"${no_celib}" = x ; then
3986
# we reset no_celib in case something fails here
3988
AC_ARG_WITH(celib,[ --with-celib=DIR use Windows/CE support library from DIR], with_celibconfig=${withval})
3989
AC_MSG_CHECKING([for Windows/CE celib directory])
3990
AC_CACHE_VAL(ac_cv_c_celibconfig,[
3991
# First check to see if --with-celibconfig was specified.
3992
if test x"${with_celibconfig}" != x ; then
3993
if test -d "${with_celibconfig}/inc" ; then
3994
ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)`
3996
AC_MSG_ERROR([${with_celibconfig} directory doesn't contain inc directory])
4000
# then check for a celib library
4001
if test x"${ac_cv_c_celibconfig}" = x ; then
4005
../../celib-palm-3.0 \
4007
`ls -dr ../celib-*3.[[0-9]]* 2>/dev/null` \
4008
${srcdir}/../celib-palm-3.0 \
4009
${srcdir}/../celib \
4010
`ls -dr ${srcdir}/../celib-*3.[[0-9]]* 2>/dev/null` \
4012
if test -d "$i/inc" ; then
4013
ac_cv_c_celibconfig=`(cd $i; pwd)`
4019
if test x"${ac_cv_c_celibconfig}" = x ; then
4020
AC_MSG_ERROR([Cannot find celib support library directory])
4023
CELIB_DIR=${ac_cv_c_celibconfig}
4024
CELIB_DIR=`echo "$CELIB_DIR" | sed -e 's!\\\!/!g'`
4025
AC_MSG_RESULT([found $CELIB_DIR])