1594
#: ../jobs/keys.txt.in:142
1597
" Validate that the External Video hot key is working as expected\n"
1599
" 1. Plug in an external monitor\n"
1600
" 2. Press the display hot key to change the monitors configuration\n"
1602
" Check that the video signal can be mirrored, extended, displayed on "
1603
"external or onboard only."
1607
#: ../jobs/keys.txt.in:154
1610
" Verify touchpad hotkey toggles touchpad functionality on and off\n"
1612
" 1. Verify the touchpad is functional\n"
1613
" 2. Tap the touchpad toggle hotkey\n"
1614
" 3. Tap the touchpad toggle hotkey again\n"
1616
" Verify the touchpad has been disabled and re-enabled."
1620
#: ../jobs/keys.txt.in:167
1623
" Verify that the keyboard backlight toggle key works properly\n"
1625
" 1. Tap the keyboard backlight key\n"
1626
" 2. Confirm that the keyboard backlight was toggled to the opposite "
1628
" 3. Tap the keyboard backlight key again\n"
1629
" 4. Confirm that the keyboard backlight was toggled to the opposite "
1632
" Did the keyboard backlight state change on each press?"
1636
#: ../jobs/keys.txt.in:187
1639
" This test will test the mute key for your microphone\n"
1641
" 1. Click \"Test\" then speak: \"Imagination is more important than "
1642
"knowledge\" (or anything else) into your microphone.\n"
1643
" 2. While you are speaking, please press the mute key for the microphone "
1644
"to mute it and press it again to unmute.\n"
1645
" 3. After a few seconds, your speech will be played back to you. If the "
1646
"key works, your speech should be interrupted for a few seconds.\n"
1648
" Does the microphone mute key work as expected?"
1652
#: ../jobs/keys.txt.in:201
1655
" This test will test the hibernate key\n"
1657
" 1. Press the hibernate key on the keyboard\n"
1658
" 2. Check that the system hibernated correctly\n"
1659
" 3. Wake your system after hibernating by pressing the power button\n"
1661
" Did the system go to hibernate after pressing the hibernate key?"
1665
#: ../jobs/keys.txt.in:214
1668
" This test will test the keyboard overhead light key or switch\n"
1670
" 1. Press the keyboard overhead light key or swtich on the light\n"
1671
" 2. Check the the keyboard overhead light turn on correctly\n"
1672
" 3. Press the key or switch again to toggle off the light\n"
1674
" Did the keyboard overhead light key or switch turns on and off the light?"
1678
#: ../jobs/led.txt.in:3
1681
" Power LED verification\n"
1683
" 1. Power LED should be on while device is switched on\n"
1685
" Does the power LED light as expected?"
1689
#: ../jobs/led.txt.in:14
1692
" Power LED verification\n"
1694
" 1. The Power LED should blink or change color while the system is "
1697
" Did the Power LED blink or change color while the system was suspended "
1698
"for the previous suspend test?"
1702
#: ../jobs/led.txt.in:24
1705
" Suspend LED verification.\n"
1707
" Skip this test if your system does not have a dedicated Suspend LED.\n"
1708
" 1. The Suspend LED should blink or change color while the system is\n"
1711
" Did the Suspend LED blink or change color while the system was suspended?"
1715
#: ../jobs/led.txt.in:36
1718
" Validate that the battery light shows charging status\n"
1720
" 1. Let system run on battery for a while\n"
1721
" 2. Plug in AC plug\n"
1723
" Did the battery indicator LED turn orange?"
1727
#: ../jobs/led.txt.in:47
1730
" Validate that the battery LED properly displays charged status\n"
1732
" 1. Let system run on battery for a short time\n"
1734
" 3. Let system run on AC\n"
1736
" Does the orange battery LED shut off when system is fully charged?"
1740
#: ../jobs/led.txt.in:59
1743
" Validate that the battery LED indicated low power\n"
1745
" 1. Let system run on battery for several hours\n"
1746
" 2. Monitor battery LED carefully\n"
1748
" Does the LED light orange when battery is low?"
1752
#: ../jobs/led.txt.in:71
1755
" HDD LED verification\n"
1757
" 1. Select \"Test\" to write and read a temporary file for a few seconds\n"
1758
" 2. HDD LED should light when writing to/reading from HDD\n"
1760
" Did the HDD LED light?"
1764
#: ../jobs/led.txt.in:83
1767
" Numeric keypad LED verification\n"
1769
" 1. Press \"Block Num\" key to toggle numeric keypad LED\n"
1770
" 2. Click on the \"Test\" button to open a window to verify your typing\n"
1771
" 3. Type using the numeric keypad both when the LED is on and off\n"
1773
" 1. Numeric keypad LED status should toggle everytime the \"Block Num\" "
1775
" 2. Numbers should only be entered in the keyboard verification window "
1776
"when the LED is on"
1780
#: ../jobs/led.txt.in:96
1783
" Block cap keys LED verification\n"
1785
" 1. Press \"Block Cap Keys\" to activate/deactivate cap keys blocking\n"
1786
" 2. Cap Keys LED should be switched on/off every time the key is pressed\n"
1788
" Did the Cap Keys LED light as expected?"
1792
#: ../jobs/led.txt.in:108
1795
" WLAN LED verification\n"
1797
" 1. During the keys/wireless test you should have observed the\n"
1798
" wireless LED while turning wireless back on.\n"
1799
" 2. WLAN LED should light or change color when wireless is turned on\n"
1801
" Did the WLAN LED turn on or change color as expected?"
1805
#: ../jobs/led.txt.in:121
1808
" Validate that WLAN LED shuts off when disabled\n"
1810
" 1. During the keys/wireless test you should have observed the WLAN LED\n"
1811
" while performing that test after turning wireless off.\n"
1812
" 2. WLAN LED should turn off or change color when wireless is turned off\n"
1814
" Did the WLAN LED turn off or change color as expected?"
1818
#: ../jobs/led.txt.in:134
1821
" Validate that the Bluetooth LED turns on and off when BT is "
1822
"enabled/disabled\n"
1824
" 1. Switch bluetooth off from a hardware switch (if present)\n"
1825
" 2. Switch bluetooth back on\n"
1826
" 3. Switch bluetooth off from the panel applet\n"
1827
" 4. Switch bluetooth back on\n"
1829
" Did the bluetooth LED turn off and on twice?"
1833
#: ../jobs/led.txt.in:149
1836
" Camera LED verification\n"
1838
" 1. Select Test to activate camera\n"
1839
" 2. Camera LED should light for a few seconds\n"
1841
" Did the camera LED light?"
1845
#: ../jobs/led.txt.in:160
1848
" Touchpad LED verification\n"
1850
" 1. Click on the touchpad button or press key combination to "
1851
"enable/disable touchpad button\n"
1852
" 2. Slide your finger on the touchpad\n"
1854
" 1. Touchpad LED status should toggle everytime the button is clicked or "
1855
"the key combination is pressed\n"
1856
" 2. When the LED is on, the mouse pointer should move on touchpad usage\n"
1857
" 3. When the LED is off, the mouse pointer should not move on touchpad "
1862
#: ../jobs/led.txt.in:173
1865
" Wireless (WLAN + Bluetooth) LED verification\n"
1867
" 1. Make sure WLAN connection is established and Bluetooth is enabled.\n"
1868
" 2. WLAN/Bluetooth LED should light\n"
1869
" 3. Switch WLAN and Bluetooth off from a hardware switch (if present)\n"
1870
" 4. Switch them back on\n"
1871
" 5. Switch WLAN and Bluetooth off from the panel applet\n"
1872
" 6. Switch them back on\n"
1874
" Did the WLAN/Bluetooth LED light as expected?"
1878
#: ../jobs/led.txt.in:189
1881
" Audio Mute LED verification.\n"
1883
" Skip this test if your system does not have a special Audio Mute LED.\n"
1884
" 1. Press the Mute key twice and observe the Audio LED to determine if "
1886
" either turned off and on or changed colors.\n"
1888
" Did the Audio LED turn on and off change color as expected?"
1092
1892
#: ../jobs/local.txt.in:3
1093
1893
msgid "Audio tests"
1094
1894
msgstr "ध्वनी परीक्षण"
1129
1929
msgstr "डिस्क परीक्षण"
1932
#: ../jobs/local.txt.in:59
1933
msgid "Ethernet Device tests"
1132
1937
#: ../jobs/local.txt.in:66
1938
msgid "eSATA disk tests"
1942
#: ../jobs/local.txt.in:73
1133
1943
msgid "Fingerprint reader tests"
1134
1944
msgstr "औंठाछाप वाचक परीक्षण"
1137
#: ../jobs/local.txt.in:73
1947
#: ../jobs/local.txt.in:80
1138
1948
msgid "Firewire disk tests"
1139
1949
msgstr "फायरवायर डिस्क परीक्षण"
1142
#: ../jobs/local.txt.in:80
1952
#: ../jobs/local.txt.in:87
1953
msgid "Firmware tests"
1957
#: ../jobs/local.txt.in:94
1143
1958
msgid "Floppy disk tests"
1147
#: ../jobs/local.txt.in:87
1962
#: ../jobs/local.txt.in:101
1148
1963
msgid "Graphics tests"
1152
#: ../jobs/local.txt.in:94
1967
#: ../jobs/local.txt.in:108
1153
1968
msgid "Hibernation tests"
1157
#: ../jobs/local.txt.in:101
1972
#: ../jobs/local.txt.in:115
1158
1973
msgid "Informational tests"
1162
#: ../jobs/local.txt.in:108
1977
#: ../jobs/local.txt.in:122
1163
1978
msgid "Input Devices tests"
1167
#: ../jobs/local.txt.in:115
1982
#: ../jobs/local.txt.in:129
1168
1983
msgid "Software Installation tests"
1172
#: ../jobs/local.txt.in:122
1987
#: ../jobs/local.txt.in:136
1173
1988
msgid "Hotkey tests"
1177
#: ../jobs/local.txt.in:136
1992
#: ../jobs/local.txt.in:143
1997
#: ../jobs/local.txt.in:150
1178
1998
msgid "Media Card tests"
1182
#: ../jobs/local.txt.in:143
2002
#: ../jobs/local.txt.in:157
1183
2003
msgid "Memory tests"
1187
#: ../jobs/local.txt.in:157
2007
#: ../jobs/local.txt.in:164
2008
msgid "Rendercheck tests"
2012
#: ../jobs/local.txt.in:171
2017
#: ../jobs/local.txt.in:178
1188
2018
msgid "Miscellaneous tests"
1192
#: ../jobs/local.txt.in:164
2022
#: ../jobs/local.txt.in:185
1193
2023
msgid "Monitor tests"
1194
2024
msgstr "मोनिटर परीक्षण"
1197
#: ../jobs/local.txt.in:171
1198
msgid "Networking tests"
2027
#: ../jobs/local.txt.in:192
2028
msgid "Non-device specific networking tests"
1202
#: ../jobs/local.txt.in:178
2032
#: ../jobs/local.txt.in:199
1203
2033
msgid "Optical Drive tests"
1207
#: ../jobs/local.txt.in:185
2037
#: ../jobs/local.txt.in:206
1208
2038
msgid "Panel Clock Verification tests"
1212
#: ../jobs/local.txt.in:185
1213
msgid "PCMCIA/PCIX Card tests"
1217
#: ../jobs/local.txt.in:206
2042
#: ../jobs/local.txt.in:213
2043
msgid "Panel Reboot Verification tests"
2047
#: ../jobs/local.txt.in:220
2048
msgid "ExpressCard tests"
2052
#: ../jobs/local.txt.in:227
1218
2053
msgid "Peripheral tests"
1222
#: ../jobs/local.txt.in:220
2057
#: ../jobs/local.txt.in:234
2058
msgid "Piglit tests"
2062
#: ../jobs/local.txt.in:241
1223
2063
msgid "Power Management tests"
1227
#: ../jobs/local.txt.in:227
2067
#: ../jobs/local.txt.in:248
1228
2068
msgid "Server Services checks"
1232
#: ../jobs/local.txt.in:234
2072
#: ../jobs/local.txt.in:255
1233
2073
msgid "Suspend tests"
1237
#: ../jobs/local.txt.in:241
2077
#: ../jobs/local.txt.in:262
1238
2078
msgid "Touchpad tests"
1242
#: ../jobs/local.txt.in:255
2082
#: ../jobs/local.txt.in:269
2083
msgid "Touchscreen tests"
2087
#: ../jobs/local.txt.in:276
1243
2088
msgid "USB tests"
1247
#: ../jobs/local.txt.in:262
2092
#: ../jobs/local.txt.in:283
1248
2093
msgid "User Applications"
1252
#: ../jobs/local.txt.in:276
2097
#: ../jobs/local.txt.in:290
2098
msgid "Virtualization tests"
2102
#: ../jobs/local.txt.in:297
1253
2103
msgid "Wireless networking tests"
1257
#: ../jobs/local.txt.in:290
2107
#: ../jobs/local.txt.in:304
2108
msgid "Mobile broadband tests"
2112
#: ../jobs/local.txt.in:311
1258
2113
msgid "Stress tests"
1262
#: ../jobs/local.txt.in:297
2117
#: ../jobs/local.txt.in:318
1263
2118
msgid "Smoke tests"
1267
#: ../jobs/local.txt.in:304
2122
#: ../jobs/local.txt.in:325
1268
2123
msgid "Sniff Sniffers"
1272
#: ../jobs/mediacard.txt.in:4
2127
#: ../jobs/mediacard.txt.in:5
1275
2130
" This test will check that the systems media card reader can\n"
1276
2131
" detect the insertion of a Multimedia Card (MMC) media\n"
1278
" 1. Click \"Test\" and insert an MMC card into the reader.\n"
2133
" 1. Click \"Test\" and then insert an MMC card into the reader.\n"
2134
" If a file browser opens up, you can safely close it.\n"
1279
2135
" (Note: this test will time-out after 20 seconds.)\n"
1280
" 2. Do not unplug the device after the test.\n"
2136
" 2. Do not remove the device after this test.\n"
1281
2137
"VERIFICATION:\n"
1282
2138
" The verification of this test is automated. Do not change the\n"
1283
2139
" automatically selected result."
1287
#: ../jobs/mediacard.txt.in:22
2143
#: ../jobs/mediacard.txt.in:24
1289
2145
"This test is automated and executes after the mediacard/mmc-insert test is "
1290
2146
"run. It tests reading and writing to the MMC card."
1294
#: ../jobs/mediacard.txt.in:30
2150
#: ../jobs/mediacard.txt.in:33
1297
2153
" This test will check that the system correctly detects\n"
1298
2154
" the removal of the MMC card from the systems card reader.\n"
1300
" 1. Click \"Test\" and remove the MMC card from the reader.\n"
1301
" (Note: this test will time-out after 20 seconds.)\n"
1303
" The verification of this test is automated. Do not change the\n"
1304
" automatically selected result."
1308
#: ../jobs/mediacard.txt.in:44
1311
" This test will check that the systems media card reader can\n"
1312
" detect the insertion of an MMC card after the system has been suspended\n"
1314
" 1. Click \"Test\" and insert an MMC card into the reader.\n"
1315
" (Note: this test will time-out after 20 seconds.)\n"
1316
" 2. Do not unplug the device after the test.\n"
1318
" The verification of this test is automated. Do not change the\n"
1319
" automatically selected result."
1323
#: ../jobs/suspend.txt.in:1378
1325
"This test is automated and executes after the mediacard/mmc-insert-after-"
1326
"suspend test is run. It tests reading and writing to the MMC card after the "
1327
"system has been suspended."
1331
#: ../jobs/suspend.txt.in:1386
1334
" This test will check that the system correctly detects the removal\n"
1335
" of an MMC card from the systems card reader after the system has been "
1338
" 1. Click \"Test\" and remove the MMC card from the reader.\n"
1339
" (Note: this test will time-out after 20 seconds.)\n"
1341
" The verification of this test is automated. Do not change the\n"
1342
" automatically selected result."
1346
#: ../jobs/mediacard.txt.in:83
1349
" This test will check that the systems media card reader can\n"
1350
" detect the insertion of a Secure Digital (SD) media card\n"
1352
" 1. Click \"Test\" and insert an SD card into the reader.\n"
1353
" (Note: this test will time-out after 20 seconds.)\n"
1354
" 2. Do not unplug the device after the test.\n"
1356
" The verification of this test is automated. Do not change the\n"
1357
" automatically selected result."
1361
#: ../jobs/mediacard.txt.in:62
2156
" 1. Click \"Test\" and then remove the MMC card from the reader.\n"
2157
" (Note: this test will time-out after 20 seconds.)\n"
2159
" The verification of this test is automated. Do not change the\n"
2160
" automatically selected result."
2164
#: ../jobs/mediacard.txt.in:48
2167
" This test will check that the systems media card reader can\n"
2168
" detect the insertion of an UNLOCKED Secure Digital (SD) media card\n"
2170
" 1. Click \"Test\" and then insert an UNLOCKED SD card into the reader.\n"
2171
" If a file browser opens up, you can safely close it.\n"
2172
" (Note: this test will time-out after 20 seconds.)\n"
2173
" 2. Do not remove the device after this test.\n"
2175
" The verification of this test is automated. Do not change the\n"
2176
" automatically selected result."
2180
#: ../jobs/mediacard.txt.in:67
1363
2182
"This test is automated and executes after the mediacard/sd-insert test is "
1364
2183
"run. It tests reading and writing to the SD card."
1368
#: ../jobs/mediacard.txt.in:70
2187
#: ../jobs/mediacard.txt.in:76
1371
2190
" This test will check that the system correctly detects\n"
1372
2191
" the removal of an SD card from the systems card reader.\n"
1374
" 1. Click \"Test\" and remove the SD card from the reader.\n"
1375
" (Note: this test will time-out after 20 seconds.)\n"
1377
" The verification of this test is automated. Do not change the\n"
1378
" automatically selected result."
1382
#: ../jobs/mediacard.txt.in:123
1385
" This test will check that the systems media card reader can\n"
1386
" detect the insertion of an SD card after the system has been suspended\n"
1388
" 1. Click \"Test\" and insert an SD card into the reader.\n"
1389
" (Note: this test will time-out after 20 seconds.)\n"
1390
" 2. Do not unplug the device after the test.\n"
1392
" The verification of this test is automated. Do not change the\n"
1393
" automatically selected result."
1397
#: ../jobs/suspend.txt.in:1420
1399
"This test is automated and executes after the mediacard/sd-insert-after-"
1400
"suspend test is run. It tests reading and writing to the SD card after the "
1401
"system has been suspended."
1405
#: ../jobs/mediacard.txt.in:148
1408
" This test will check that the system correctly detects\n"
1409
" the removal of an SD card from the systems card reader after the system "
1410
"has been suspended.\n"
1412
" 1. Click \"Test\" and remove the SD card from the reader.\n"
1413
" (Note: this test will time-out after 20 seconds.)\n"
1415
" The verification of this test is automated. Do not change the\n"
1416
" automatically selected result."
1420
#: ../jobs/mediacard.txt.in:172
1423
" This test will check that the systems media card reader can\n"
1424
" detect the insertion of a Secure Digital High-Capacity (SDHC) media "
1427
" 1. Click \"Test\" and insert an SDHC card into the reader.\n"
1428
" (Note: this test will time-out after 20 seconds.)\n"
1429
" 2. Do not unplug the device after the test.\n"
1431
" The verification of this test is automated. Do not change the\n"
1432
" automatically selected result."
1436
#: ../jobs/mediacard.txt.in:113
2193
" 1. Click \"Test\" and then remove the SD card from the reader.\n"
2194
" (Note: this test will time-out after 20 seconds.)\n"
2196
" The verification of this test is automated. Do not change the\n"
2197
" automatically selected result."
2201
#: ../jobs/mediacard.txt.in:93
2203
"This is a fully automated version of mediacard/sd-automated and assumes that "
2204
"the system under test has a memory card device plugged in prior to checkbox "
2205
"execution. It is intended for SRU automated testing."
2209
#: ../jobs/mediacard.txt.in:102
2212
" This test will check that the systems media card reader can\n"
2213
" detect the insertion of a UNLOCKED Secure Digital High-Capacity\n"
2214
" (SDHC) media card\n"
2216
" 1. Click \"Test\" and then insert an UNLOCKED SDHC card into the "
2218
" If a file browser opens up, you can safely close it.\n"
2219
" (Note: this test will time-out after 20 seconds.)\n"
2220
" 2. Do not remove the device after this test.\n"
2222
" The verification of this test is automated. Do not change the\n"
2223
" automatically selected result."
2227
#: ../jobs/mediacard.txt.in:122
1438
2229
"This test is automated and executes after the mediacard/sdhc-insert test is "
1439
2230
"run. It tests reading and writing to the SDHC card."
1443
#: ../jobs/mediacard.txt.in:121
2234
#: ../jobs/mediacard.txt.in:131
1446
2237
" This test will check that the system correctly detects\n"
1447
2238
" the removal of an SDHC card from the systems card reader.\n"
1449
" 1. Click \"Test\" and remove the SDHC card from the reader.\n"
1450
" (Note: this test will time-out after 20 seconds.)\n"
1452
" The verification of this test is automated. Do not change the\n"
1453
" automatically selected result."
1457
#: ../jobs/mediacard.txt.in:212
1460
" This test will check that the systems media card reader can\n"
1461
" detect the insertion of an SDHC media card after the system has been "
1464
" 1. Click \"Test\" and insert an SDHC card into the reader.\n"
1465
" (Note: this test will time-out after 20 seconds.)\n"
1466
" 2. Do not unplug the device after the test.\n"
1468
" The verification of this test is automated. Do not change the\n"
1469
" automatically selected result."
1473
#: ../jobs/suspend.txt.in:1463
1475
"This test is automated and executes after the mediacard/sdhc-insert-after-"
1476
"suspend test is run. It tests reading and writing to the SDHC card after the "
1477
"system has been suspended."
1481
#: ../jobs/suspend.txt.in:1471
1484
" This test will check that the system correctly detects the removal\n"
1485
" of an SDHC card from the systems card reader after the system has been "
1488
" 1. Click \"Test\" and remove the SDHC card from the reader.\n"
1489
" (Note: this test will time-out after 20 seconds.)\n"
1491
" The verification of this test is automated. Do not change the\n"
1492
" automatically selected result."
1496
#: ../jobs/mediacard.txt.in:251
2240
" 1. Click \"Test\" and then remove the SDHC card from the reader.\n"
2241
" (Note: this test will time-out after 20 seconds.)\n"
2243
" The verification of this test is automated. Do not change the\n"
2244
" automatically selected result."
2248
#: ../jobs/mediacard.txt.in:146
1499
2251
" This test will check that the systems media card reader can\n"
1500
2252
" detect the insertion of a Compact Flash (CF) media card\n"
1502
" 1. Click \"Test\" and insert a CF card into the reader.\n"
2254
" 1. Click \"Test\" and then insert a CF card into the reader.\n"
2255
" If a file browser opens up, you can safely close it.\n"
1503
2256
" (Note: this test will time-out after 20 seconds.)\n"
1504
" 2. Do not unplug the device after the test.\n"
2257
" 2. Do not remove the device after this test.\n"
1505
2258
"VERIFICATION:\n"
1506
2259
" The verification of this test is automated. Do not change the\n"
1507
2260
" automatically selected result."
1511
#: ../jobs/mediacard.txt.in:153
2264
#: ../jobs/mediacard.txt.in:165
1513
2266
"This test is automated and executes after the mediacard/cf-insert test is "
1514
2267
"run. It tests reading and writing to the CF card."
1518
#: ../jobs/mediacard.txt.in:161
2271
#: ../jobs/mediacard.txt.in:174
1521
2274
" This test will check that the system correctly detects\n"
1522
2275
" the removal of a CF card from the systems card reader.\n"
1524
" 1. Click \"Test\" and remove the CF card from the reader.\n"
1525
" (Note: this test will time-out after 20 seconds.)\n"
1527
" The verification of this test is automated. Do not change the\n"
1528
" automatically selected result."
1532
#: ../jobs/mediacard.txt.in:291
1535
" This test will check that the systems media card reader can\n"
1536
" detect the insertion of a CF card after the system has been suspended\n"
1538
" 1. Click \"Test\" and insert a CF card into the reader.\n"
1539
" (Note: this test will time-out after 20 seconds.)\n"
1540
" 2. Do not unplug the device after the test.\n"
1542
" The verification of this test is automated. Do not change the\n"
1543
" automatically selected result."
1547
#: ../jobs/mediacard.txt.in:194
1549
"This test is automated and executes after the mediacard/cf-insert-after-"
1550
"suspend test is run. It tests reading and writing to the CF card after the "
1551
"system has been suspended."
1555
#: ../jobs/mediacard.txt.in:202
1558
" This test will check that the system correctly detects the removal\n"
1559
" of a CF card from the systems card reader after the system has been "
1562
" 1. Click \"Test\" and remove the CF card from the reader.\n"
1563
" (Note: this test will time-out after 20 seconds.)\n"
1565
" The verification of this test is automated. Do not change the\n"
1566
" automatically selected result."
2277
" 1. Click \"Test\" and then remove the CF card from the reader.\n"
2278
" (Note: this test will time-out after 20 seconds.)\n"
2280
" The verification of this test is automated. Do not change the\n"
2281
" automatically selected result."
2285
#: ../jobs/mediacard.txt.in:189
2288
" This test will check that the systems media card reader can\n"
2289
" detect the insertion of a Secure Digital Extended Capacity (SDXC) media "
2292
" 1. Click \"Test\" and then insert an UNLOCKED SDXC card into the "
2294
" If a file browser opens up, you can safely close it.\n"
2295
" (Note: this test will time-out after 20 seconds.)\n"
2296
" 2. Do not remove the device after this test.\n"
2298
" The verification of this test is automated. Do not change the\n"
2299
" automatically selected result."
2303
#: ../jobs/mediacard.txt.in:208
2305
"This test is automated and executes after the mediacard/sdxc-insert test is "
2306
"run. It tests reading and writing to the SDXC card."
2310
#: ../jobs/mediacard.txt.in:217
2313
" This test will check that the system correctly detects\n"
2314
" the removal of a SDXC card from the systems card reader.\n"
2316
" 1. Click \"Test\" and then remove the SDXC card from the reader.\n"
2317
" (Note: this test will time-out after 20 seconds.)\n"
2319
" The verification of this test is automated. Do not change the\n"
2320
" automatically selected result."
2324
#: ../jobs/mediacard.txt.in:232
2327
" This test will check that the systems media card reader can\n"
2328
" detect the insertion of a Memory Stick (MS) media card\n"
2330
" 1. Click \"Test\" and then insert a MS card into the reader.\n"
2331
" If a file browser opens up, you can safely close it.\n"
2332
" (Note: this test will time-out after 20 seconds.)\n"
2333
" 2. Do not remove the device after this test.\n"
2335
" The verification of this test is automated. Do not change the\n"
2336
" automatically selected result."
2340
#: ../jobs/mediacard.txt.in:251
2342
"This test is automated and executes after the mediacard/ms-insert test is "
2343
"run. It tests reading and writing to the MS card."
2347
#: ../jobs/mediacard.txt.in:260
2350
" This test will check that the system correctly detects\n"
2351
" the removal of a MS card from the systems card reader.\n"
2353
" 1. Click \"Test\" and then remove the MS card from the reader.\n"
2354
" (Note: this test will time-out after 20 seconds.)\n"
2356
" The verification of this test is automated. Do not change the\n"
2357
" automatically selected result."
2361
#: ../jobs/mediacard.txt.in:275
2364
" This test will check that the systems media card reader can\n"
2365
" detect the insertion of a Memory Stick Pro (MSP) media card\n"
2367
" 1. Click \"Test\" and then insert a MSP card into the reader.\n"
2368
" If a file browser opens up, you can safely close it.\n"
2369
" (Note: this test will time-out after 20 seconds.)\n"
2370
" 2. Do not remove the device after this test.\n"
2372
" The verification of this test is automated. Do not change the\n"
2373
" automatically selected result."
2377
#: ../jobs/mediacard.txt.in:294
2379
"This test is automated and executes after the mediacard/msp-insert test is "
2380
"run. It tests reading and writing to the MSP card."
2384
#: ../jobs/mediacard.txt.in:303
2387
" This test will check that the system correctly detects\n"
2388
" the removal of a MSP card from the systems card reader.\n"
2390
" 1. Click \"Test\" and remove the MSP card from the reader.\n"
2391
" (Note: this test will time-out after 20 seconds.)\n"
2393
" The verification of this test is automated. Do not change the\n"
2394
" automatically selected result."
2398
#: ../jobs/mediacard.txt.in:318
2401
" This test will check that the systems media card reader can\n"
2402
" detect the insertion of a Extreme Digital (xD) media card\n"
2404
" 1. Click \"Test\" and then insert a xD card into the reader.\n"
2405
" If a file browser opens up, you can safely close it.\n"
2406
" (Note: this test will time-out after 20 seconds.)\n"
2407
" 2. Do not remove the device after this test.\n"
2409
" The verification of this test is automated. Do not change the\n"
2410
" automatically selected result."
2414
#: ../jobs/mediacard.txt.in:337
2416
"This test is automated and executes after the mediacard/xd-insert test is "
2417
"run. It tests reading and writing to the xD card."
2421
#: ../jobs/mediacard.txt.in:346
2424
" This test will check that the system correctly detects\n"
2425
" the removal of a xD card from the systems card reader.\n"
2427
" 1. Click \"Test\" and then remove the xD card from the reader.\n"
2428
" (Note: this test will time-out after 20 seconds.)\n"
2430
" The verification of this test is automated. Do not change the\n"
2431
" automatically selected result."
2435
#: ../jobs/mediacard.txt.in:363
2438
" This test will check your Media Card data transfer performance.\n"
2440
" 1. Insert SD card into the reader slot on this computer.\n"
2441
" 2. Click the test button to perform the test.\n"
2443
" Did the results of the test match the expected performance of the "
2448
#: ../jobs/mediacard.txt.in:378
2451
" This test will check your Media Card data transfer performance.\n"
2453
" 1. Insert SDHC card into the reader slot on this computer.\n"
2454
" 2. Click the test button to perform the test.\n"
2456
" Did the results of the test match the expected performance of the "
2461
#: ../jobs/mediacard.txt.in:393
2464
" This test will check your Media Card data transfer performance.\n"
2466
" 1. Insert MMC card into the reader slot on this computer.\n"
2467
" 2. Click the test button to perform the test.\n"
2469
" Did the results of the test match the expected performance of the "
2474
#: ../jobs/mediacard.txt.in:408
2477
" This test will check your Media Card data transfer performance.\n"
2479
" 1. Insert CF card into the reader slot on this computer.\n"
2480
" 2. Click the test button to perform the test.\n"
2482
" Did the results of the test match the expected performance of the "
2487
#: ../jobs/mediacard.txt.in:423
2490
" This test will check your Media Card data transfer performance.\n"
2492
" 1. Insert SDXC card into the reader slot on this computer.\n"
2493
" 2. Click the test button to perform the test.\n"
2495
" Did the results of the test match the expected performance of the "
2500
#: ../jobs/mediacard.txt.in:438
2503
" This test will check your Media Card data transfer performance.\n"
2505
" 1. Insert MS card into the reader slot on this computer.\n"
2506
" 2. Click the test button to perform the test.\n"
2508
" Did the results of the test match the expected performance of the "
2513
#: ../jobs/mediacard.txt.in:453
2516
" This test will check your Media Card data transfer performance.\n"
2518
" 1. Insert MSP card into the reader slot on this computer.\n"
2519
" 2. Click the test button to perform the test.\n"
2521
" Did the results of the test match the expected performance of the "
2526
#: ../jobs/mediacard.txt.in:468
2529
" This test will check your Media Card data transfer performance.\n"
2531
" 1. Insert XD card into the reader slot on this computer.\n"
2532
" 2. Click the test button to perform the test.\n"
2534
" Did the results of the test match the expected performance of the "
2243
#: ../jobs/stress.txt.in:122
3470
#: ../jobs/stress.txt.in:127
2244
3471
msgid "Attaches the log from the 250 cycle Suspend/Resume test if it exists"
2248
#: ../jobs/stress.txt.in:139
3475
#: ../jobs/stress.txt.in:133 ../jobs/suspend.txt.in:265
3477
"Checks the sleep times to ensure that a machine suspends and resumes within "
3482
#: ../jobs/stress.txt.in:144
2249
3483
msgid "Stress reboot system (100 cycles)"
2253
#: ../jobs/stress.txt.in:155
3487
#: ../jobs/stress.txt.in:160
2254
3488
msgid "Stress poweroff system (100 cycles)"
2258
#: ../jobs/stress.txt.in:167
3492
#: ../jobs/stress.txt.in:172
2259
3493
msgid "Check logs for the stress reboot (100 cycles) test case"
2263
#: ../jobs/stress.txt.in:179
3497
#: ../jobs/stress.txt.in:184
2264
3498
msgid "Check logs for the stress poweroff (100 cycles) test case"
2268
#: ../jobs/suspend.txt.in:4
3502
#: ../jobs/stress.txt.in:199
3503
msgid "Run the graphics stress test. This test can take a few minutes."
3507
#: ../jobs/stress.txt.in:208
3508
msgid "Attaches the graphics stress results to the submission."
3512
#: ../jobs/stress.txt.in:214
3513
msgid "Runs a test that transfers 100 10MB files 3 times to usb."
3517
#: ../jobs/stress.txt.in:220
3518
msgid "Runs a test that transfers 100 10MB files 3 times to a SDHC card."
3522
#: ../jobs/stress.txt.in:227
3523
msgid "Ping ubuntu.com and restart network interfaces 100 times"
3527
#: ../jobs/stress.txt.in:237
3530
" To make sure that stressing the wifi hotkey does not cause applets to "
3531
"disappear from the panel or the system to lock up\n"
3533
" 1. Log in to desktop\n"
3534
" 2. Press wifi hotkey at a rate of 1 press per second and slowly increase "
3535
"the speed of the tap, until you are tapping as fast as possible\n"
3537
" Verify the system is not frozen and the wifi and bluetooth applets are "
3538
"still visible and functional"
3542
#: ../jobs/suspend.txt.in:5
2269
3543
msgid "Record the current network before suspending."
2273
#: ../jobs/suspend.txt.in:9
3547
#: ../jobs/suspend.txt.in:11
2274
3548
msgid "Record the current resolution before suspending."
2278
#: ../jobs/suspend.txt.in:17
3552
#: ../jobs/suspend.txt.in:20
2279
3553
msgid "Record mixer settings before suspending."
2283
#: ../jobs/suspend.txt.in:22
3557
#: ../jobs/suspend.txt.in:26
2284
3558
msgid "Verify that all the CPUs are online before suspending"
2288
#: ../jobs/suspend.txt.in:27
3562
#: ../jobs/suspend.txt.in:32
2290
3564
"Dumps memory info to a file for comparison after suspend test has been run"
2294
#: ../jobs/suspend.txt.in:37
3568
#: ../jobs/suspend.txt.in:42
2296
3570
"This test disconnects all connections and then connects to the wireless "
2297
3571
"interface. It then checks the connection to confirm it's working as expected."
2301
#: ../jobs/suspend.txt.in:171
3575
#: ../jobs/suspend.txt.in:200
3578
" This test will send the image 'JPEG_Color_Image_Ubuntu.jpg' to a "
3579
"specified device\n"
3581
" 1. Make sure Bluetooth is enabled by checking the Bluetooth indicator "
3583
" 2. Click \"Test\" and you will be prompted to enter the Bluetooth device "
3584
"name of a device that can accept file transfers (It may take a few moments "
3585
"after entering the name for the file to begin sending)\n"
3586
" 3. Accept any prompts that appear on both devices\n"
3588
" Was the data correctly transferred?"
3592
#: ../jobs/suspend.txt.in:226
2304
3595
" This test will check suspend and resume\n"
2306
3597
" 1. Click \"Test\" and your system will suspend for about 30 - 60 "
2308
" 2. If your system does not wake itself up after 60 seconds, please press "
3599
" 2. Observe the Power LED to see if it blinks or changes color during "
3601
" 3. If your system does not wake itself up after 60 seconds, please press "
2309
3602
"the power button momentarily to wake the system manually\n"
2310
" 3. If your system fails to wake at all and must be rebooted, restart "
3603
" 4. If your system fails to wake at all and must be rebooted, restart "
2311
3604
"System Testing after reboot and mark this test as Failed\n"
2312
3605
"VERIFICATION:\n"
2313
" Did your system suspend and resume correctly?"
3606
" Did your system suspend and resume correctly?\n"
3607
" (NOTE: Please only consider whether the system successfully suspended "
3608
"and resumed. Power/Suspend LED verification will occur after this test is "
2317
#: ../jobs/suspend.txt.in:195
3613
#: ../jobs/suspend.txt.in:243
2318
3614
msgid "This is the automated version of suspend/suspend_advanced."
2322
3618
#: ../jobs/suspend.txt.in:253
3620
"Automated check of the suspend log to look for errors reported by fwts"
3624
#: ../jobs/suspend.txt.in:274
3627
" Wake up by USB keyboard\n"
3629
" 1. Enable \"Wake by USB KB/Mouse\" item in BIOS\n"
3630
" 2. Press \"Test\" to enter suspend (S3) mode\n"
3631
" 3. Press any key of USB keyboard to wake system up\n"
3633
" Did the system wake up from suspend mode when you pressed a keyboard key?"
3637
#: ../jobs/suspend.txt.in:290
3640
" Wake up by USB mouse\n"
3642
" 1. Enable \"Wake by USB KB/Mouse\" item in BIOS\n"
3643
" 2. Press \"Test\" to enter suspend (S3) mode\n"
3644
" 3. Press any button of USB mouse to wake system up\n"
3646
" Did the system wake up from suspend mode when you pressed the mouse "
3651
#: ../jobs/suspend.txt.in:304
2323
3652
msgid "Test the network after resuming."
2327
#: ../jobs/suspend.txt.in:259
3656
#: ../jobs/suspend.txt.in:311
2329
3658
"Test to see that we have the same resolution after resuming as before."
2333
#: ../jobs/suspend.txt.in:278
3662
#: ../jobs/suspend.txt.in:332
2335
3664
"Verify that mixer settings after suspend are the same as before suspend."
2339
#: ../jobs/suspend.txt.in:291
3668
#: ../jobs/suspend.txt.in:347
2340
3669
msgid "Verify that all CPUs are online after resuming."
2344
#: ../jobs/suspend.txt.in:304
3673
#: ../jobs/suspend.txt.in:362
2345
3674
msgid "Verify that all memory is available after resuming from suspend."
2349
#: ../jobs/suspend.txt.in:311
3678
#: ../jobs/suspend.txt.in:370
2352
3681
" This test will check that the display is correct after suspend and "
2473
3950
" 1. Take picture using USB webcam\n"
2474
3951
"VERIFICATION:\n"
2475
" 1. Review attachment manually later"
3952
" Review attachment manually later"
2479
#: ../jobs/suspend.txt.in:415
3956
#: ../jobs/suspend.txt.in:1102
2482
" Do some challenging operations, suspend the system, do more challenging\n"
2483
" operations - then check for lockup on the GPU\n"
3959
" Do some challenging operations then check for lockup on the GPU\n"
2485
3961
" 1. Create 2 glxgears windows and move them quickly\n"
2486
" 2. Switch workspaces/viewports with wmctrl\n"
2487
" 3. Launch a Flash playback in firefox\n"
2488
" 4. Suspend/resume\n"
2490
" 1. After a 60s workload, check kern.log for reported GPU errors"
2494
#: ../jobs/touchpad.txt.in:3
2497
" 1. Touchpad verification\n"
2499
" 1. Make sure that touchpad is enabled\n"
2500
" 2. Try to move pointer using touchpad\n"
2501
" 3. Pointer should move accordingly\n"
2503
" 1. Did touchpad work as expected?"
2507
#: ../jobs/touchpad.txt.in:18
2510
" 1. Touchpad verification\n"
2512
" 1. Click on Power Indicator -> System Settings -> Mouse -> Touchpad\n"
2513
" 2. Make sure that the \"Enable horizontal scrolling\" checkbox is "
2515
" 3. Select 'Test' to open in GEdit a file with a really wide line\n"
2516
" 4. Verify that you can move the the horizontal slider by moving your "
2517
"finger side by side in the lower part of the touchpad\n"
2519
" 1. Did touchpad work as expected?"
2523
#: ../jobs/touchpad.txt.in:34
2526
" 1. Touchpad verification\n"
2528
" 1. Click on Power Indicator -> System Settings -> Mouse -> Touchpad\n"
2529
" 2. Make sure that the \"Edge scrolling\" radiobox is checked\n"
2530
" 3. Select 'Test' to open in GEdit a file with a multiple lines of text\n"
2531
" 4. Verify that you can move the the vertical slider by moving your "
2532
"finger side by side in the right part of the touchpad\n"
2534
" 1. Did touchpad work as expected?\n"
2536
" 1. Edge Scrolling option should be enabled by default"
2540
#: ../jobs/usb.txt.in:4
3962
" 2. Switch workspaces with wmctrl\n"
3963
" 3. Launch an HTML5 video playback in firefox\n"
3965
" After a 60s workload, check kern.log for reported GPU errors"
3969
#: ../jobs/suspend.txt.in:1130
3971
"Checks the length of time it takes to reconnect an existing wifi connection "
3972
"after a suspend/resume cycle."
3976
#: ../jobs/suspend.txt.in:1152
3978
"Checks the length of time it takes to reconnect an existing wired "
3980
" after a suspend/resume cycle."
3984
#: ../jobs/suspend.txt.in:1160
3987
" Validate that the power LED operated the same after resuming from "
3990
" 1. Power LED should be on while device is switched on\n"
3992
" Does the power LED remain on after resuming from suspend?"
3996
#: ../jobs/suspend.txt.in:1172
3999
" Validate that the battery light shows charging status after resuming "
4002
" 1. Let system run on battery for a while\n"
4003
" 2. Plug in AC plug\n"
4005
" Did the battery indicator LED still turn orange after resuming from "
4010
#: ../jobs/suspend.txt.in:1184
4013
" Validate that the battery LED properly displays charged status after "
4014
"resuming from suspend\n"
4016
" 1. Let system run on battery for a short time\n"
4018
" 3. Let system run on AC\n"
4020
" Does the orange battery LED still shut off when system is fully charged "
4021
"after resuming from suspend?"
4025
#: ../jobs/suspend.txt.in:1197
4028
" Validate that the battery LED indicated low power after resuming from "
4031
" 1. Let system run on battery for several hours\n"
4032
" 2. Monitor battery LED carefully\n"
4034
" Does the LED light orange when battery is low after resuming from "
4039
#: ../jobs/suspend.txt.in:1210
4042
" Validate that the HDD LED still operates as expected after resuming from "
4045
" 1. Select \"Test\" to write and read a temporary file for a few seconds\n"
4046
" 2. HDD LED should blink when writing to/reading from HDD\n"
4048
" Did the HDD LED still blink with HDD activity after resuming from "
4053
#: ../jobs/suspend.txt.in:1223
4056
" Validate that the numeric keypad LED operates the same before and after "
4057
"resuming from suspend\n"
4059
" 1. Press \"Block Num\" key to toggle numeric keypad LED\n"
4060
" 2. Click on the \"Test\" button to open a window to verify your typing\n"
4061
" 3. Type using the numeric keypad both when the LED is on and off\n"
4063
" 1. Numeric keypad LED status should toggle everytime the \"Block Num\" "
4065
" 2. Numbers should only be entered in the keyboard verification window "
4066
"when the LED is on"
4070
#: ../jobs/suspend.txt.in:1237
4073
" Validate that the Caps Lock key operates the same before and after "
4074
"resuming from suspend\n"
4076
" 1. Press \"Block Cap Keys\" to activate/deactivate cap keys blocking\n"
4077
" 2. Cap Keys LED should be switched on/off every time the key is pressed\n"
4079
" Did the Cap Keys LED light as expected after resuming from suspend?"
4083
#: ../jobs/suspend.txt.in:1249
4086
" WLAN LED verification after resuming from suspend\n"
4088
" 1. Make sure WLAN connection is established\n"
4089
" 2. WLAN LED should light\n"
4091
" Did the WLAN LED light as expected after resuming from suspend?"
4095
#: ../jobs/suspend.txt.in:1261
4098
" Validate that WLAN LED shuts off when disabled after resuming from "
4101
" 1. Connect to AP\n"
4102
" 2. Use Physical switch to disable WLAN\n"
4104
" 4. Use Network-Manager to disable WLAN\n"
4106
" Did the LED turn off then WLAN is disabled after resuming from suspend?"
4110
#: ../jobs/suspend.txt.in:1275
4113
" Validate that the Bluetooth LED turns on and off when BT is "
4114
"enabled/disabled after resuming from suspend\n"
4116
" 1. Switch bluetooth off from a hardware switch (if present)\n"
4117
" 2. Switch bluetooth back on\n"
4118
" 3. Switch bluetooth off from the panel applet\n"
4119
" 4. Switch bluetooth back on\n"
4121
" Did the bluetooth LED turn off and on twice after resuming from suspend?"
4125
#: ../jobs/suspend.txt.in:1292
4128
" Validate that the camera LED still works as expected after resuming from "
4131
" 1. Select Test to activate camera\n"
4132
" 2. Camera LED should light for a few seconds\n"
4134
" Did the camera LED still turn on and off after resuming from suspend?"
4138
#: ../jobs/suspend.txt.in:1304
4141
" Touchpad LED verification after resuming from suspend\n"
4143
" 1. Click on the touchpad button or press key combination to "
4144
"enable/disable touchpad button\n"
4145
" 2. Slide your finger on the touchpad\n"
4147
" 1. Touchpad LED status should toggle everytime the button is clicked or "
4148
"the key combination is pressed\n"
4149
" 2. When the LED is on, the mouse pointer should move on touchpad usage\n"
4150
" 3. When the LED is off, the mouse pointer should not move on touchpad "
4155
#: ../jobs/suspend.txt.in:1318
4158
" Validate Wireless (WLAN + Bluetooth) LED operated the same after "
4159
"resuming from suspend\n"
4161
" 1. Make sure WLAN connection is established and Bluetooth is enabled.\n"
4162
" 2. WLAN/Bluetooth LED should light\n"
4163
" 3. Switch WLAN and Bluetooth off from a hardware switch (if present)\n"
4164
" 4. Switch them back on\n"
4165
" 5. Switch WLAN and Bluetooth off from the panel applet\n"
4166
" 6. Switch them back on\n"
4168
" Did the WLAN/Bluetooth LED light as expected after resuming from suspend?"
4172
#: ../jobs/suspend.txt.in:1335
4175
" This test will test the brightness key after resuming from suspend\n"
4177
" 1. Press the brightness buttons on the keyboard\n"
4179
" Did the brightness change following to your key presses after resuming "
4184
#: ../jobs/suspend.txt.in:1350
4187
" This test will test the volume keys of your keyboard after resuming from "
4190
" Skip this test if your computer has no volume keys.\n"
4191
" 1. Click test to open a window on which to test the volume keys.\n"
4192
" 2. If all the keys work, the test will be marked as passed.\n"
4194
" Did the volume change following to your key presses?"
4198
#: ../jobs/suspend.txt.in:1367
4201
" This test will test the mute key of your keyboard after resuming from "
4204
" 1. Click test to open a window on which to test the mute key.\n"
4205
" 2. If the key works, the test will pass and the window will close.\n"
4207
" Did the volume mute following your key presses?"
4211
#: ../jobs/suspend.txt.in:1381
4214
" This test will test the sleep key after resuming from suspend\n"
4216
" 1. Press the sleep key on the keyboard\n"
4217
" 2. Wake your system up by pressing the power button\n"
4219
" Did the system go to sleep after pressing the sleep key after resuming "
4224
#: ../jobs/suspend.txt.in:1396
4227
" This test will test the battery information key after resuming from "
4230
" Skip this test if you do not have a Battery Button.\n"
4231
" 1. Click Test to begin\n"
4232
" 2. Press the Battery Info button (or combo like Fn+F3)\n"
4233
" 3: Close the Power Statistics tool if it opens\n"
4235
" Did the Battery Info key work as expected after resuming from suspend?"
4239
#: ../jobs/suspend.txt.in:1411
4242
" This test will test the wireless key after resuming from suspend\n"
4244
" 1. Press the wireless key on the keyboard\n"
4245
" 2. Press the same key again\n"
4247
" Did the wireless go off on the first press and on again on the second "
4248
"after resuming from suspend?"
4252
#: ../jobs/suspend.txt.in:1427
4255
" This test will test the media keys of your keyboard after resuming from "
4258
" Skip this test if your computer has no media keys.\n"
4259
" 1. Click test to open a window on which to test the media keys.\n"
4260
" 2. If all the keys work, the test will be marked as passed.\n"
4262
" Do the keys work as expected after resuming from suspend?"
4266
#: ../jobs/suspend.txt.in:1444
4269
" This test will test the super key of your keyboard after resuming from "
4272
" 1. Click test to open a window on which to test the super key.\n"
4273
" 2. If the key works, the test will pass and the window will close.\n"
4275
" Does the super key work as expected after resuming from suspend?"
4279
#: ../jobs/suspend.txt.in:1457
4282
" Validate that the External Video hot key is working as expected after "
4283
"resuming from suspend\n"
4285
" 1. Plug in an external monitor\n"
4286
" 2. Press the display hot key to change the monitors configuration\n"
4288
" Check that the video signal can be mirrored, extended, displayed on "
4289
"external or onboard only, after resuming from suspend."
4293
#: ../jobs/suspend.txt.in:1470
4296
" Verify touchpad hotkey toggles touchpad functionality on and off after "
4297
"resuming from suspend\n"
4299
" 1. Verify the touchpad is functional\n"
4300
" 2. Tap the touchpad toggle hotkey\n"
4301
" 3. Tap the touchpad toggle hotkey again\n"
4303
" Verify the touchpad has been disabled and re-enabled."
4307
#: ../jobs/suspend.txt.in:1486
4310
" This test will check that the system correctly detects the insertion of\n"
4311
" a USB storage device after suspend and resume.\n"
4313
" 1. Click \"Test\" and insert a USB storage device (pen-drive/HDD).\n"
4314
" (Note: this test will time-out after 20 seconds.)\n"
4315
" 2. Do not unplug the device after the test.\n"
4317
" The verification of this test is automated. Do not change the\n"
4318
" automatically selected result."
4322
#: ../jobs/suspend.txt.in:1506
4325
" This test will check that the system correctly detects the insertion of\n"
4326
" a USB 3.0 storage device after suspend and resume.\n"
4328
" 1. Click \"Test\" and insert a USB 3.0 storage device (pen-drive/HDD) "
4330
" a USB 3.0 port. (Note: this test will time-out after 20 seconds.)\n"
4331
" 2. Do not unplug the device after the test.\n"
4333
" The verification of this test is automated. Do not change the\n"
4334
" automatically selected result."
4338
#: ../jobs/suspend.txt.in:1524
4341
" This test will check that the system correctly detects the removal of\n"
4342
" a USB storage device after suspend.\n"
4344
" 1. Click \"Test\" and remove the USB device.\n"
4345
" (Note: this test will time-out after 20 seconds.)\n"
4347
" The verification of this test is automated. Do not change the\n"
4348
" automatically selected result."
4352
#: ../jobs/suspend.txt.in:1543
4355
" This test will check that the system correctly detects the removal of\n"
4356
" a USB 3.0 storage device after suspend\n"
4358
" 1. Click \"Test\" and remove the USB 3.0 device.\n"
4359
" (Note: this test will time-out after 20 seconds.)\n"
4361
" The verification of this test is automated. Do not change the\n"
4362
" automatically selected result."
4366
#: ../jobs/suspend.txt.in:1560
4368
"This test is automated and executes after the "
4369
"suspend/usb_insert_after_suspend test is run."
4373
#: ../jobs/suspend.txt.in:1572
4375
"This test is automated and executes after the "
4376
"suspend/usb3_insert_after_suspend test is run."
4380
#: ../jobs/suspend.txt.in:1582 ../jobs/usb.txt.in:172
4382
"This is an automated version of usb/storage-automated and assumes that the "
4383
"server has usb storage devices plugged in prior to checkbox execution. It is "
4384
"intended for servers and SRU automated testing."
4388
#: ../jobs/suspend.txt.in:1595 ../jobs/usb.txt.in:184
4390
"This is an automated version of usb3/storage-automated and assumes that the "
4391
"server has usb 3.0 storage devices plugged in prior to checkbox execution. "
4392
"It is intended for servers and SRU automated testing."
4396
#: ../jobs/suspend.txt.in:1606 ../jobs/usb.txt.in:209
4398
"This test will check that your USB 2.0 port transfers data at a minimum "
4403
#: ../jobs/suspend.txt.in:1618 ../jobs/usb.txt.in:221
4405
"This test will check that your USB 3.0 port transfers data at a minimum "
4406
"expected speed in accordance with the specification of USB 3.0 SuperSpeed "
4411
#: ../jobs/suspend.txt.in:1628
4414
" This test will check that the systems media card reader can\n"
4415
" detect the insertion of an MMC card after the system has been suspended\n"
4417
" 1. Click \"Test\" and insert an MMC card into the reader.\n"
4418
" If a file browser opens up, you can safely close it.\n"
4419
" (Note: this test will time-out after 20 seconds.)\n"
4420
" 2. Do not remove the device after this test.\n"
4422
" The verification of this test is automated. Do not change the\n"
4423
" automatically selected result."
4427
#: ../jobs/suspend.txt.in:1647
4429
"This test is automated and executes after the mediacard/mmc-insert-after-"
4430
"suspend test is run. It tests reading and writing to the MMC card after the "
4431
"system has been suspended."
4435
#: ../jobs/suspend.txt.in:1656
4438
" This test will check that the system correctly detects the removal\n"
4439
" of an MMC card from the systems card reader after the system has been "
4442
" 1. Click \"Test\" and remove the MMC card from the reader.\n"
4443
" (Note: this test will time-out after 20 seconds.)\n"
4445
" The verification of this test is automated. Do not change the\n"
4446
" automatically selected result."
4450
#: ../jobs/suspend.txt.in:1672
4453
" This test will check that the systems media card reader can\n"
4454
" detect the insertion of an UNLOCKED SD card after the system\n"
4455
" has been suspended\n"
4457
" 1. Click \"Test\" and insert an UNLOCKED SD card into the reader.\n"
4458
" If a file browser opens up, you can safely close it.\n"
4459
" (Note: this test will time-out after 20 seconds.)\n"
4460
" 2. Do not remove the device after this test.\n"
4462
" The verification of this test is automated. Do not change the\n"
4463
" automatically selected result."
4467
#: ../jobs/suspend.txt.in:1692
4469
"This test is automated and executes after the mediacard/sd-insert-after-"
4470
"suspend test is run. It tests reading and writing to the SD card after the "
4471
"system has been suspended."
4475
#: ../jobs/suspend.txt.in:1701
4478
" This test will check that the system correctly detects\n"
4479
" the removal of an SD card from the systems card reader\n"
4480
" after the system has been suspended.\n"
4482
" 1. Click \"Test\" and remove the SD card from the reader.\n"
4483
" (Note: this test will time-out after 20 seconds.)\n"
4485
" The verification of this test is automated. Do not change the\n"
4486
" automatically selected result."
4490
#: ../jobs/suspend.txt.in:1718
4493
" This test will check that the systems media card reader can\n"
4494
" detect the insertion of an UNLOCKED SDHC media card after the\n"
4495
" system has been suspended\n"
4497
" 1. Click \"Test\" and insert an UNLOCKED SDHC card into the reader.\n"
4498
" If a file browser opens up, you can safely close it.\n"
4499
" (Note: this test will time-out after 20 seconds.)\n"
4500
" 2. Do not remove the device after this test.\n"
4502
" The verification of this test is automated. Do not change the\n"
4503
" automatically selected result."
4507
#: ../jobs/suspend.txt.in:1738
4509
"This test is automated and executes after the mediacard/sdhc-insert-after-"
4510
"suspend test is run. It tests reading and writing to the SDHC card after the "
4511
"system has been suspended."
4515
#: ../jobs/suspend.txt.in:1747
4518
" This test will check that the system correctly detects the removal\n"
4519
" of an SDHC card from the systems card reader after the system has been "
4522
" 1. Click \"Test\" and remove the SDHC card from the reader.\n"
4523
" (Note: this test will time-out after 20 seconds.)\n"
4525
" The verification of this test is automated. Do not change the\n"
4526
" automatically selected result."
4530
#: ../jobs/suspend.txt.in:1763
4533
" This test will check that the systems media card reader can\n"
4534
" detect the insertion of a CF card after the system has been suspended\n"
4536
" 1. Click \"Test\" and insert a CF card into the reader.\n"
4537
" If a file browser opens up, you can safely close it.\n"
4538
" (Note: this test will time-out after 20 seconds.)\n"
4539
" 2. Do not remove the device after this test.\n"
4541
" The verification of this test is automated. Do not change the\n"
4542
" automatically selected result."
4546
#: ../jobs/suspend.txt.in:1782
4548
"This test is automated and executes after the mediacard/cf-insert-after-"
4549
"suspend test is run. It tests reading and writing to the CF card after the "
4550
"system has been suspended."
4554
#: ../jobs/suspend.txt.in:1791
4557
" This test will check that the system correctly detects the removal\n"
4558
" of a CF card from the systems card reader after the system has been "
4561
" 1. Click \"Test\" and remove the CF card from the reader.\n"
4562
" (Note: this test will time-out after 20 seconds.)\n"
4564
" The verification of this test is automated. Do not change the\n"
4565
" automatically selected result."
4569
#: ../jobs/suspend.txt.in:1808
4572
" This test will check that the systems media card reader can\n"
4573
" detect the insertion of a SDXC card after the system has been suspended\n"
4575
" 1. Click \"Test\" and insert a SDXC card into the reader.\n"
4576
" If a file browser opens up, you can safely close it.\n"
4577
" (Note: this test will time-out after 20 seconds.)\n"
4578
" 2. Do not remove the device after this test.\n"
4580
" The verification of this test is automated. Do not change the\n"
4581
" automatically selected result."
4585
#: ../jobs/suspend.txt.in:1827
4587
"This test is automated and executes after the mediacard/sdxc-insert-after-"
4588
"suspend test is run. It tests reading and writing to the SDXC card after the "
4589
"system has been suspended."
4593
#: ../jobs/suspend.txt.in:1836
4596
" This test will check that the system correctly detects the removal\n"
4597
" of a SDXC card from the systems card reader after the system has been "
4600
" 1. Click \"Test\" and remove the SDXC card from the reader.\n"
4601
" If a file browser opens up, you can safely close it.\n"
4602
" (Note: this test will time-out after 20 seconds.)\n"
4604
" The verification of this test is automated. Do not change the\n"
4605
" automatically selected result."
4609
#: ../jobs/suspend.txt.in:1853
4612
" This test will check that the systems media card reader can\n"
4613
" detect the insertion of a MS card after the system has been suspended\n"
4615
" 1. Click \"Test\" and insert a MS card into the reader.\n"
4616
" If a file browser opens up, you can safely close it.\n"
4617
" (Note: this test will time-out after 20 seconds.)\n"
4618
" 2. Do not remove the device after this test.\n"
4620
" The verification of this test is automated. Do not change the\n"
4621
" automatically selected result."
4625
#: ../jobs/suspend.txt.in:1872
4627
"This test is automated and executes after the mediacard/ms-insert-after-"
4628
"suspend test is run. It tests reading and writing to the MS card after the "
4629
"system has been suspended."
4633
#: ../jobs/suspend.txt.in:1881
4636
" This test will check that the system correctly detects the removal\n"
4637
" of a MS card from the systems card reader after the system has been "
4640
" 1. Click \"Test\" and remove the MS card from the reader.\n"
4641
" (Note: this test will time-out after 20 seconds.)\n"
4643
" The verification of this test is automated. Do not change the\n"
4644
" automatically selected result."
4648
#: ../jobs/suspend.txt.in:1897
4651
" This test will check that the systems media card reader can\n"
4652
" detect the insertion of a MSP card after the system has been suspended\n"
4654
" 1. Click \"Test\" and insert a MSP card into the reader.\n"
4655
" If a file browser opens up, you can safely close it.\n"
4656
" (Note: this test will time-out after 20 seconds.)\n"
4657
" 2. Do not remove the device after this test.\n"
4659
" The verification of this test is automated. Do not change the\n"
4660
" automatically selected result."
4664
#: ../jobs/suspend.txt.in:1916
4666
"This test is automated and executes after the mediacard/msp-insert-after-"
4667
"suspend test is run. It tests reading and writing to the MSP card after the "
4668
"system has been suspended."
4672
#: ../jobs/suspend.txt.in:1925
4675
" This test will check that the system correctly detects the removal\n"
4676
" of a MSP card from the systems card reader after the system has been "
4679
" 1. Click \"Test\" and remove the MSP card from the reader.\n"
4680
" (Note: this test will time-out after 20 seconds.)\n"
4682
" The verification of this test is automated. Do not change the\n"
4683
" automatically selected result."
4687
#: ../jobs/suspend.txt.in:1941
4690
" This test will check that the systems media card reader can\n"
4691
" detect the insertion of a xD card after the system has been suspended\n"
4693
" 1. Click \"Test\" and insert a xD card into the reader.\n"
4694
" If a file browser opens up, you can safely close it.\n"
4695
" (Note: this test will time-out after 20 seconds.)\n"
4696
" 2. Do not remove the device after this test.\n"
4698
" The verification of this test is automated. Do not change the\n"
4699
" automatically selected result."
4703
#: ../jobs/suspend.txt.in:1960
4705
"This test is automated and executes after the mediacard/xd-insert-after-"
4706
"suspend test is run. It tests reading and writing to the xD card after the "
4707
"system has been suspended."
4711
#: ../jobs/suspend.txt.in:1969
4714
" This test will check that the system correctly detects the removal\n"
4715
" of a xD card from the systems card reader after the system has been "
4718
" 1. Click \"Test\" and remove the xD card from the reader.\n"
4719
" (Note: this test will time-out after 20 seconds.)\n"
4721
" The verification of this test is automated. Do not change the\n"
4722
" automatically selected result."
4726
#: ../jobs/suspend.txt.in:1988
4727
msgid "Determine if the touchpad is still functioning after suspend/resume."
4731
#: ../jobs/suspend.txt.in:1995 ../jobs/touchscreen.txt.in:35
4734
" Check touchscreen tap recognition\n"
4736
" 1. Tap an object on the screen with finger. The cursor should jump to "
4737
"location tapped and object should highlight\n"
4739
" Does tap recognition work?"
4743
#: ../jobs/touchpad.txt.in:5
4746
" Touchpad user-verify\n"
4748
" 1. Make sure that touchpad is enabled.\n"
4749
" 2. Move cursor using the touchpad.\n"
4751
" Did the cursor move?"
4755
#: ../jobs/touchpad.txt.in:21
4758
" Touchpad horizontal scroll verification\n"
4760
" 1. Select \"Test\" when ready and place your cursor within the borders "
4761
"of the displayed test window.\n"
4762
" 2. Verify that you can move the horizontal slider by moving your finger "
4763
"right and left in the lower part of the touchpad.\n"
4765
" Could you scroll right and left?"
4769
#: ../jobs/touchpad.txt.in:37
4772
" Touchpad vertical scroll verification\n"
4774
" 1. Select \"Test\" when ready and place your cursor within the borders "
4775
"of the displayed test window.\n"
4776
" 2. Verify that you can move the vertical slider by moving your finger up "
4777
"and down in the right part of the touchpad.\n"
4779
" Could you scroll up and down?"
4783
#: ../jobs/touchpad.txt.in:53
4785
"Determine whether the touchpad is detected as a singletouch device "
4790
#: ../jobs/touchpad.txt.in:62
4792
"Determine whether the touchpad is detected as a multitouch device "
4797
#: ../jobs/touchpad.txt.in:69
4800
" Touchpad manual detection of multitouch.\n"
4802
" 1. Look at the specifications for your system.\n"
4804
" Is the touchpad supposed to be multitouch?"
4808
#: ../jobs/touchpad.txt.in:80
4811
" Determine that the hot corner feature is working as expected\n"
4813
" 1. Launch a browser.\n"
4814
" 2. Go to a website, and hover the cursor over a link.\n"
4815
" 3. Tap the upper right corner if the touchpad.\n"
4817
" Did the tap trigger a new tab to be opended?"
4821
#: ../jobs/touchpad.txt.in:93
4824
" Determine that the selection window function is working as expected.\n"
4826
" 1. Open a file folder\n"
4827
" 2. Double tap and drag the cursor across several file.\n"
4829
" Did a selection window open and were several files selected?"
4833
#: ../jobs/touchpad.txt.in:106
4836
" Determine that the right click function is working as expected.\n"
4838
" 1. Open a file folder\n"
4839
" 2. Hover cursor over file in folder\n"
4840
" 3. 2-touch tap.\n"
4842
" Did the right click pop up menu appear?"
4846
#: ../jobs/touchpad.txt.in:120
4849
" Touchpad 2-touch horizontal scroll verification\n"
4851
" 1. Select \"Test\" when ready and place your cursor within the borders "
4852
"of the displayed test window.\n"
4853
" 2. Verify that you can move the horizontal slider by moving 2 fingers "
4854
"right and left along the touchpad.\n"
4856
" Could you scroll right and left?"
4860
#: ../jobs/touchpad.txt.in:133
4863
" Touchpad 2-touch vertical scroll verification\n"
4865
" 1. Select \"Test\" when ready and place your cursor within the borders "
4866
"of the displayed test window.\n"
4867
" 2. Verify that you can move the vertical slider by moving 2 fingers up "
4868
"and down along the touchpad.\n"
4870
" Could you scroll up and down?"
4874
#: ../jobs/touchpad.txt.in:145
4877
" Determine that the drag and drop function is working as expected.\n"
4879
" 1. Browse to the examples folder in the current user's home directory\n"
4880
" 2. Double tap and hold to select the \"Ubuntu_Free_Culture_Showcase\" "
4882
" 2. Drag the selected folder to the desktop and remove finger from "
4885
" Did a selected folder move to the desktop?"
4889
#: ../jobs/touchscreen.txt.in:7
4891
"Determine whether the screen is detected as a non-touch device automatically."
4895
#: ../jobs/touchscreen.txt.in:16
4897
"Determine whether the screen is detected as a multitouch device "
4902
#: ../jobs/touchscreen.txt.in:23
4905
" Touchscreen manual detection of multitouch.\n"
4907
" 1. Look at the specifications for your system.\n"
4909
" Is the screen supposed to be multitouch?"
4913
#: ../jobs/touchscreen.txt.in:47
4916
" Check touchscreen drag & drop\n"
4918
" 1. Double tap, hold, and drag an object on the desktop\n"
4919
" 2. Drop the object in a different location\n"
4921
" Does the object select and drag and drop?"
4925
#: ../jobs/touchscreen.txt.in:60
4928
" Check touchscreen pinch gesture for zoom\n"
4930
" 1. Place two fingers on the screen and pinch them together\n"
4931
" 2. Place two fingers on the screen and move then apart\n"
4933
" Does the screen zoom in and out?"
4937
#: ../jobs/touchscreen.txt.in:73
4940
" Validate that 3-touch drag is operating as expected\n"
4942
" 1. Open a windows and bring it to the foreground\n"
4943
" 2. 3-touch the window and drag\n"
4945
" Did the window move along with the drag?"
4949
#: ../jobs/touchscreen.txt.in:86
4952
" Validate that 4-touch tap is operating as expected\n"
4954
" 1. 4-touch tap anywhere on the touchscreen\n"
4956
" Did the tap open the Dash?"
4960
#: ../jobs/usb.txt.in:5
2541
4961
msgid "Detects and shows USB devices attached to this system."
2545
#: ../jobs/usb.txt.in:10
4965
#: ../jobs/usb.txt.in:12
2548
4968
" This test will check that your system detects USB storage devices.\n"