2
<dt>Boot up the iso using a CD/DVD or USB Key to a Live Session</dt>
3
<dd>The system boots properly and loads the installer displaying Welcome dialog with language selection and 'Try FAMILY' and 'Install FAMILY' buttons</dd>
4
<dt>Click on the Install FAMILY icon</dt>
5
<dd>The 'Preparing to install FAMILY' screen is displayed</dd>
6
<dt>On the screen Preparing to install FAMILY, note the state of each check mark for the following components
8
<li>Your system have at least the amount a space indicated</li>
9
<li>(If on a 'laptop'). Is plugged to a power source</li>
10
<li>Is connected to the Internet</li>
13
<dd>Check marks represent the state of your system accurately</dd>
14
<dt>Click on the continue button</dt>
15
<dd>The 'Installation type' screen is displayed</dd>
16
<dt>Select Something Else</dt>
17
<dd>A screen showing the current hard disks and partition layouts is displayed</dd>
18
<dt>Select the drive you wish to partition and use the 'Add', 'Change', and 'Delete' buttons to create your desired scheme</dt>
19
<dd>The screen updates showing your desired partitions and mount points</dd>
20
<dt>Make sure that your scheme also has a separated /home partition included</dt>
21
<dd>You will need the separated /home partition to verify that erasing and reinstalling FAMILY will wipe it out</dd>
22
<dt>Once you have you partitioning scheme laid out and are happy click on Install Now</dt>
23
<dd>The partitions and disk layouts are created. Then, the 'Where are you?' screen is displayed</dd>
24
<dt>If your system is connected to the network, note the preselected timezone correspond with your timezone and the city indicated in the text box </dt>
25
<dd>The timezone and city displayed match your timezone and a city from your area</dd>
26
<dt>Click on the continue button</dt>
27
<dd>The 'Keyboard Layout' screen appears</dd>
28
<dd>The proposed keyboard corresponds to your keyboard</dd>
29
<dt>Click on continue</dt>
30
<dd>The 'Who are you?' screen appears</dd>
31
<dt>Input your initial user details and password (Note admin can not be used - it is a dedicated Linux User)</dt>
32
<dd>Name, username and password are accepted. Additionally, the continue button is enabled</dd>
33
<dt>Click on the continue button</dt>
34
<dd>The 'Welcome to FAMILY ' slide is displayed</dd>
35
<dt>Wait for the installer to finish</dt>
36
<dd>An 'Installation Complete' dialog appears</dd>
37
<dt>Click the Restart now button</dt>
38
<dd>GUI is shut down, a prompt to remove media and press Enter appears</dd>
39
<dt>Remove the disc and press enter</dt>
40
<dd>The machine has been rebooted</dd>
41
<dt>Allow the machine to reboot</dt>
42
<dd>The system boots properly and loads into FAMILY</dd>
43
<dt>Login as the user you created, or ensure that you are auto-logged in as the user created during setup if you checked the auto-login option</dt>
44
<dd>The new user's desktop is presented</dd>
45
<dt>Create a new folder on the desktop by right clicking on it and title it 'test', open Firefox and browse to a couple of sites</dt>
46
<dd>Now you have a test folder on the desktop and some browsing history, this will be needed to check if erasing and reinstall of FAMILY will wipe them out </dd>
47
<dt>Reboot using the iso with a CD/DVD or USB Key to a Live Session to perform a reinstall of FAMILY</dt>
48
<dd>The system boots properly and loads the installer displaying Welcome dialog with language selection and 'Try FAMILY' and 'Install FAMILY' buttons</dd>
49
<dt>Click on the Install FAMILY icon</dt>
50
<dd>The 'Preparing to install FAMILY' screen is displayed</dd>
51
<dt>On the screen Preparing to install FAMILY, note the state of each check mark for the following components
53
<li>Your system have at least the amount a space indicated</li>
54
<li>(If on a 'laptop'). Is plugged to a power source</li>
55
<li>Is connected to the Internet</li>
58
<dd>Check marks represent the state of your system accurately</dd>
59
<dt>Click on the continue button</dt>
60
<dd>The 'Installation type' screen is displayed</dd>
61
<dt>Select 'Erase FAMILY and Reinstall'</dt>
62
<dt>If your system is connected to the network, note the preselected timezone corresponds with your timezone and the city indicated in the text box </dt>
63
<dd>The timezone and city displayed match your timezone and a city from your area</dd>
64
<dt>Click on the continue button</dt>
65
<dd>The 'Keyboard Layout' screen appears</dd>
66
<dd>The proposed keyboard corresponds to your keyboard</dd>
67
<dt>Click on continue</dt>
68
<dd>The 'Who are you?' screen appears</dd>
69
<dt>Input the same user details as you did on the first install of FAMILY</dt>
70
<dd>Name, username and password are accepted. You should enter the same username as the first install so that the /home partition is re-used. The continue button is enabled</dd>
71
<dt>Click on the continue button</dt>
72
<dd>The 'Welcome to FAMILY ' slide is displayed</dd>
73
<dt>Wait for the installer to finish</dt>
74
<dd>An 'Installation Complete' dialog appears</dd>
75
<dt>Click the Restart now button</dt>
76
<dd>GUI is shut down, a prompt to remove media and press Enter appears</dd>
77
<dt>Remove the disc and press enter</dt>
78
<dd>The machine has been rebooted</dd>
79
<dt>Allow the machine to reboot</dt>
80
<dd>The system boots properly and loads into FAMILY</dd>
81
<dt>Login as the user you created, or ensure that you are auto-logged in as the user created during setup if you checked the auto-login option</dt>
82
<dd>The new user's desktop is presented</dd>
83
<dt>Check that the 'test' folder created on the first install has disappeard from the desktop, open Firefox and check that in the history tab has no browsing history, then open a Terminal typing CTRL+ALT+T and type 'df -h' in it without quotes, there should be no /home partition</dd>
84
<dd>You should verify that the /home partition has been wiped out an no previous data has been left back </dd>
87
<p><strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.<br />
88
If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong></p>
b'\\ No newline at end of file'