1
**********************************************************************
2
**********************************************************************
4
***** this is unmaintained *****
6
If you happen to find problems with autoconfiguration and building,
7
I simply cannot help you. I'm looking for a maintainer that doesn't mind
8
spending a few minutes every now and then on the next release to make sure
9
things are still in working order.
11
For the moment all autoconf stuff ahs been moved into unmaintained!!
13
**********************************************************************
14
**********************************************************************
19
Configuration from CVS
20
======================
22
If you're using source checked out from CVS, rather than a source
23
distribution tarball, please be aware that you can use ./autogen.sh in
24
place of ./configure below.
26
Because this is a cross-platform project, the source templates for
27
the autoconf scripts are sequestered in the 'makefiles' directory.
28
Running './autogen.sh' will copy them into their conventional places at
29
the lop level. If you already see the files there, you don't need to
30
worry about this step.
35
These are generic installation instructions.
37
The `configure' shell script attempts to guess correct values for
38
various system-dependent variables used during compilation. It uses
39
those values to create a `Makefile' in each directory of the package.
40
It may also create one or more `.h' files containing system-dependent
41
definitions. Finally, it creates a shell script `config.status' that
42
you can run in the future to recreate the current configuration, a file
43
`config.cache' that saves the results of its tests to speed up
44
reconfiguring, and a file `config.log' containing compiler output
45
(useful mainly for debugging `configure').
47
If you need to do unusual things to compile the package, please try
48
to figure out how `configure' could check whether to do them, and mail
49
diffs or instructions to the address given in the `README' so they can
50
be considered for the next release. If at some point `config.cache'
51
contains results you don't want to keep, you may remove or edit it.
53
The file `configure.in' is used to create `configure' by a program
54
called `autoconf'. You only need `configure.in' if you want to change
55
it or regenerate `configure' using a newer version of `autoconf'.
57
The simplest way to compile this package is:
59
1. `cd' to the directory containing the package's source code and type
60
`./configure' to configure the package for your system. If you're
61
using `csh' on an old version of System V, you might need to type
62
`sh ./configure' instead to prevent `csh' from trying to execute
65
Running `configure' takes awhile. While running, it prints some
66
messages telling which features it is checking for.
68
2. Type `make' to compile the package.
70
3. Optionally, type `make check' to run any self-tests that come with
73
4. Type `make install' to install the programs and any data files and
76
5. You can remove the program binaries and object files from the
77
source code directory by typing `make clean'. To also remove the
78
files that `configure' created (so you can compile the package for
79
a different kind of computer), type `make distclean'. There is
80
also a `make maintainer-clean' target, but that is intended mainly
81
for the package's developers. If you use it, you may have to get
82
all sorts of other programs in order to regenerate files that came
83
with the distribution.
88
Some systems require unusual options for compilation or linking that
89
the `configure' script does not know about. You can give `configure'
90
initial values for variables by setting them in the environment. Using
91
a Bourne-compatible shell, you can do that on the command line like
93
CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
95
Or on systems that have the `env' program, you can do it like this:
96
env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
98
Compiling For Multiple Architectures
99
====================================
101
You can compile the package for more than one kind of computer at the
102
same time, by placing the object files for each architecture in their
103
own directory. To do this, you must use a version of `make' that
104
supports the `VPATH' variable, such as GNU `make'. `cd' to the
105
directory where you want the object files and executables to go and run
106
the `configure' script. `configure' automatically checks for the
107
source code in the directory that `configure' is in and in `..'.
109
If you have to use a `make' that does not supports the `VPATH'
110
variable, you have to compile the package for one architecture at a time
111
in the source code directory. After you have installed the package for
112
one architecture, use `make distclean' before reconfiguring for another
118
By default, `make install' will install the package's files in
119
`/usr/local/bin', `/usr/local/man', etc. You can specify an
120
installation prefix other than `/usr/local' by giving `configure' the
121
option `--prefix=PATH'.
123
You can specify separate installation prefixes for
124
architecture-specific files and architecture-independent files. If you
125
give `configure' the option `--exec-prefix=PATH', the package will use
126
PATH as the prefix for installing programs and libraries.
127
Documentation and other data files will still use the regular prefix.
129
In addition, if you use an unusual directory layout you can give
130
options like `--bindir=PATH' to specify different values for particular
131
kinds of files. Run `configure --help' for a list of the directories
132
you can set and what kinds of files go in them.
134
If the package supports it, you can cause programs to be installed
135
with an extra prefix or suffix on their names by giving `configure' the
136
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
141
Some packages pay attention to `--enable-FEATURE' options to
142
`configure', where FEATURE indicates an optional part of the package.
143
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
144
is something like `gnu-as' or `x' (for the X Window System). The
145
`README' should mention any `--enable-' and `--with-' options that the
148
For packages that use the X Window System, `configure' can usually
149
find the X include and library files automatically, but if it doesn't,
150
you can use the `configure' options `--x-includes=DIR' and
151
`--x-libraries=DIR' to specify their locations.
153
Specifying the System Type
154
==========================
156
There may be some features `configure' can not figure out
157
automatically, but needs to determine by the type of host the package
158
will run on. Usually `configure' can figure that out, but if it prints
159
a message saying it can not guess the host type, give it the
160
`--host=TYPE' option. TYPE can either be a short name for the system
161
type, such as `sun4', or a canonical name with three fields:
164
See the file `config.sub' for the possible values of each field. If
165
`config.sub' isn't included in this package, then this package doesn't
166
need to know the host type.
168
If you are building compiler tools for cross-compiling, you can also
169
use the `--target=TYPE' option to select the type of system they will
170
produce code for and the `--build=TYPE' option to select the type of
171
system on which you are compiling the package.
176
If you want to set default values for `configure' scripts to share,
177
you can create a site shell script called `config.site' that gives
178
default values for variables like `CC', `cache_file', and `prefix'.
179
`configure' looks for `PREFIX/share/config.site' if it exists, then
180
`PREFIX/etc/config.site' if it exists. Or, you can set the
181
`CONFIG_SITE' environment variable to the location of the site script.
182
A warning: not all `configure' scripts look for a site script.
187
`configure' recognizes the following options to control how it
191
Use and save the results of the tests in FILE instead of
192
`./config.cache'. Set FILE to `/dev/null' to disable caching, for
193
debugging `configure'.
196
Print a summary of the options to `configure', and exit.
201
Do not print messages saying which checks are being made. To
202
suppress all normal output, redirect it to `/dev/null' (any error
203
messages will still be shown).
206
Look for the package's source code in directory DIR. Usually
207
`configure' can determine that directory automatically.
210
Print the version of Autoconf used to generate the `configure'
213
`configure' also accepts some other, not widely useful, options.