2
* (C) Copyright 2009 Stefan Roese <sr@denx.de>, DENX Software Engineering
4
* Original Author Guenter Gebhardt
5
* Copyright (C) 2006 Micronas GmbH
7
* This program is free software; you can redistribute it and/or
8
* modify it under the terms of the GNU General Public License as
9
* published by the Free Software Foundation; either version 2 of
10
* the License, or (at your option) any later version.
12
* This program is distributed in the hope that it will be useful,
13
* but WITHOUT ANY WARRANTY; without even the implied warranty of
14
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15
* GNU General Public License for more details.
17
* You should have received a copy of the GNU General Public License
18
* along with this program; if not, write to the Free Software
19
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
27
int vct_ehci_hcd_init(u32 *hccr, u32 *hcor)
33
dcgu_set_reset_switch(DCGU_HW_MODULE_USB_24, DCGU_SWITCH_ON);
34
dcgu_set_reset_switch(DCGU_HW_MODULE_USB_60, DCGU_SWITCH_ON);
35
dcgu_set_clk_switch(DCGU_HW_MODULE_USB_24, DCGU_SWITCH_ON);
36
dcgu_set_clk_switch(DCGU_HW_MODULE_USB_PLL, DCGU_SWITCH_ON);
37
dcgu_set_reset_switch(DCGU_HW_MODULE_USB_24, DCGU_SWITCH_OFF);
39
/* Wait until (DCGU_USBPHY_STAT == 7) */
40
addr = DCGU_USBPHY_STAT(DCGU_BASE);
45
dcgu_set_clk_switch(DCGU_HW_MODULE_USB_60, DCGU_SWITCH_ON);
46
dcgu_set_reset_switch(DCGU_HW_MODULE_USB_60, DCGU_SWITCH_OFF);
48
retval = scc_reset(SCC_USB_RW, 0);
50
printf("scc_reset(SCC_USB_RW, 0) returned: 0x%x\n", retval);
53
retval = scc_reset(SCC_CPU1_SPDMA_RW, 0);
55
printf("scc_reset(SCC_CPU1_SPDMA_RW, 0) returned: 0x%x\n",
63
* For the AGU bypass, where the SCC client provides full
66
scc_set_usb_address_generation_mode(1);
67
scc_setup_dma(SCC_USB_RW, BCU_USB_BUFFER_1, DMA_LINEAR,
68
USE_NO_FH, DMA_READ, 0);
69
scc_setup_dma(SCC_CPU1_SPDMA_RW, BCU_USB_BUFFER_1, DMA_LINEAR,
70
USE_NO_FH, DMA_WRITE, 0);
71
scc_setup_dma(SCC_USB_RW, BCU_USB_BUFFER_0, DMA_LINEAR,
72
USE_NO_FH, DMA_WRITE, 0);
73
scc_setup_dma(SCC_CPU1_SPDMA_RW, BCU_USB_BUFFER_0, DMA_LINEAR,
74
USE_NO_FH, DMA_READ, 0);
76
/* Enable memory interface */
77
scc_enable(SCC_USB_RW, 1);
79
/* Start (start_cmd=0) DMAs */
80
scc_dma_cmd(SCC_USB_RW, DMA_START, 0, DMA_READ);
81
scc_dma_cmd(SCC_USB_RW, DMA_START, 0, DMA_WRITE);
83
printf("Cannot configure USB memory channel.\n");
84
printf("USB can not access RAM. SCC configuration failed.\n");
88
/* Wait a short while */
91
reg_write(USBH_BURSTSIZE(USBH_BASE), 0x00001c1c);
93
/* Set EHCI structures and DATA in RAM */
94
reg_write(USBH_USBHMISC(USBH_BASE), 0x00840003);
95
/* Set USBMODE to bigendian and set host mode */
96
reg_write(USBH_USBMODE(USBH_BASE), 0x00000007);
99
* USBH_BURSTSIZE MUST EQUAL 0x00001c1c in order for
100
* 512 byte USB transfers on the bulk pipe to work properly.
101
* Set USBH_BURSTSIZE to 0x00001c1c
103
reg_write(USBH_BURSTSIZE(USBH_BASE), 0x00001c1c);
105
/* Insert access register addresses */
106
*hccr = REG_GLOBAL_START_ADDR + USBH_CAPLENGTH(USBH_BASE);
107
*hcor = REG_GLOBAL_START_ADDR + USBH_USBCMD(USBH_BASE);