1
2006-10-17 Kevin P. Fleming <kpfleming@digium.com>
3
* Zaptel 1.2.10 released
5
2006-10-11 17:22 +0000 [r1499] Joshua Colp <jcolp@digium.com>
7
* Makefile: Copy to both directories, not just the first one.
9
2006-10-03 04:50 +0000 [r1493-1496] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
11
* xpp/README.Astribank: Updated README.Astribank to reflect current
14
* xpp/utils/genzaptelconf: * run config function (genconf) in a
15
single pass. Bumped version to 0.5.6 . * E1 spans should not be
16
configured as "national". TODO: find a better default * Add
17
support for Sangoma A102 (Hopefully also all A10x) PRI cards: -d
18
won't work, but will configure existing spans. * Better comments
19
in genconf() * Removing update_extensions_defs: cleaning
20
temporary files is only done once.
22
* xpp/utils/genzaptelconf: * fixed a small syntax error * Hopefully
23
correct PRI setting for country=cl
25
* xpp/utils/genzaptelconf: Allow overriding the location of the
26
asterisk init.d script using the variable ASTERISK_INIT_SCRIPT
27
(from the config file or from the environment).
29
2006-09-16 07:45 +0000 [r1468] Tilghman Lesher <tilghman@mail.jeffandtilghman.com>
31
* zaptel.c: Round two of the fix for "hard-safe -> hard-unsafe lock
32
order detected" (Issue 7620) Only difference is that the fix is
33
only defined for kernel versions 2.6.11 and above; older kernels
34
keep the current (possible deadlocking) code.
36
2006-09-11 Kevin P. Fleming <kpfleming@digium.com>
38
* Zaptel 1.2.9.1 released
40
2006-09-09 19:29 +0000 [r1458] Joshua Colp <jcolp@digium.com>
42
* wct4xxp/fw2h.c: Update firmware header generation tool to support
43
paths being supplied with the filename (reported internally by
46
2006-09-09 15:24 +0000 [r1457] Tzafrir Cohen <tzafrir.cohen@xorcom.com>
48
* xpp/utils/print_modes.c (added), xpp/card_fxo.c, xpp/xpp_zap.h,
49
xpp/card_fxs.c, xpp/card_fxo.h, xpp/xproto.c, xpp/Makefile,
50
xpp/utils/Makefile, xpp/card_fxs.h, xpp/utils/FPGA_FXS.hex,
51
xpp/xproto.h, xpp/xpd.h, xpp/init_data_3_20.cmd,
52
xpp/init_data_4_20.cmd, xpp/calibrate_slics (added),
53
xpp/initialize_registers, xpp/xbus-core.c,
54
xpp/init_data_3_19.cmd, xpp/init_data_4_19.cmd,
55
xpp/utils/xpp_fxloader, xpp/utils/fpga_load.c,
56
xpp/utils/USB_8613.hex, xpp/xbus-core.h, xpp/utils/genzaptelconf,
57
xpp/xdefs.h, xpp/utils, xpp, xpp/xpp_usb.c, xpp/xpp_zap.c: Latest
58
xpp driver. Backported from trunk (r1455, Xorcom r2157)
60
2006-09-08 Kevin P. Fleming <kpfleming@digium.com>
62
* Zaptel 1.2.9 released
64
2006-09-08 23:49 +0000 [r1444] Joshua Colp <jcolp@digium.com>
66
* wct4xxp/base.c, Makefile: Move CONFIG_FW_LOADER check to Makefile
67
(reported internally by Spiceland)
69
2006-09-08 16:11 +0000 [r1436-1438] Kevin P. Fleming <kpfleming@digium.com>
71
* wct4xxp/base.c, wct4xxp/vpm450m.c: fix problem with
72
VPM450M/VPMOCT when T1 and E1 are both used on the card make
73
hardware DTMF detection default based on whether the module is a
74
VPM400M or a VPM450M/VPMOCT
76
2006-09-08 03:17 +0000 [r1431] Joshua Colp <jcolp@digium.com>
78
* pciradio.c: Include moduleparam.h like every other module for
79
certain 2.6 kernels (issue #7884 reported by iceberg13de)
81
2006-09-05 16:37 +0000 [r1400] Matt Frederickson <creslin@digium.com>
83
* Makefile: Forgot to add part of clean target to 1.2
85
2006-08-27 22:58 +0000 [r1368] Joshua Colp <jcolp@digium.com>
87
* Makefile: Copy the firmware from the new location
89
2006-08-27 02:27 +0000 [r1359-1363] Kevin P. Fleming <kpfleming@digium.com>
91
* wct4xxp/base.c, Makefile, wct4xxp/vpm450m.h, wct4xxp (added),
92
OCT6114-128D.ima (removed), octapi_llman_private.h (removed),
93
include (removed), wct4xxp/wct4xxp-diag.c, fw2h.c (removed),
94
wct4xxp/wct4xxp.h, vpm450m.c (removed), wct4xxp/Kbuild,
95
wct4xxp_base.c (removed), wcte11xp.c, vpm450m.h (removed),
96
wct4xxp/Makefile, octvpm.h (removed), /,
97
wct4xxp/OCT6114-128D.ima, octapi_bt0_private.h (removed),
98
wct4xxp-diag.c (removed), wct4xxp.h (removed), wct4xxp/fw2h.c,
99
wct4xxp/vpm450m.c: merge in new, cleaner Octasic API integration
1
101
2006-08-22 Kevin P. Fleming <kpfleming@digium.com>
3
103
* Zaptel 1.2.8 released