1
.TH TRIPPLITE 8 "Tue Oct 22 2002" "" "Network UPS Tools (NUT)"
1
.TH TRIPPLITE 8 "Sat Aug 21 2004" "" "Network UPS Tools (NUT)"
3
tripplite \- Driver for Tripp-Lite SmartPro UPS equipment
3
tripplite \- Driver for Tripp\(hyLite SmartPro UPS equipment
5
This man page only documents the hardware-specific features of the
5
This man page only documents the hardware\(hyspecific features of the
6
6
tripplite driver. For information about the core driver, see
9
9
.SH SUPPORTED HARDWARE
10
This driver should work on the SmartPro line, including the SMART 700.
10
This driver should work on the SmartPro line, including the SMART700
11
and SMART700SER. It only supports SmartPro models that communicate
12
using the serial port.
12
14
.SH EXTRA ARGUMENTS
14
This driver does not support any extra settings in the
15
This driver supports the following optional settings in the
18
.IP "offdelay=\fInum\fR"
19
Time to wait before the UPS is turned off after the kill power command is
21
The default value is 64 (in seconds).
23
.IP "rebootdelay=\fInum\fR"
24
Set the timer before the UPS is cycled after the reboot command is sent.
25
The default value is 64 (in seconds).
27
.IP "startdelay=\fInum\fR"
28
Set the time that the UPS waits before it turns itself back on after a
30
The default value is 60 (in seconds).
32
.SH KNOWN ISSUES AND BUGS
33
Battery charge information may not be correct for all UPSes. It is tuned
34
to be correct for a SMART700SER. Other models may not provide correct
35
information. Information from the manufacturer would be helpful.
18
38
Rickard E. (Rik) Faith <faith@alephnull.com>
39
Nicholas Kain <nicholas@kain.us>