1
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
4
This file is free documentation; the Free Software Foundation gives
5
unlimited permission to copy, distribute and modify it.
10
These are generic installation instructions.
12
The `configure' shell script attempts to guess correct values for
13
various system-dependent variables used during compilation. It uses
14
those values to create a `Makefile' in each directory of the package.
15
It may also create one or more `.h' files containing system-dependent
16
definitions. Finally, it creates a shell script `config.status' that
17
you can run in the future to recreate the current configuration, and a
18
file `config.log' containing compiler output (useful mainly for
19
debugging `configure').
21
It can also use an optional file (typically called `config.cache'
22
and enabled with `--cache-file=config.cache' or simply `-C') that saves
23
the results of its tests to speed up reconfiguring. (Caching is
24
disabled by default to prevent problems with accidental use of stale
27
If you need to do unusual things to compile the package, please try
28
to figure out how `configure' could check whether to do them, and mail
29
diffs or instructions to the address given in the `README' so they can
30
be considered for the next release. If you are using the cache, and at
31
some point `config.cache' contains results you don't want to keep, you
32
may remove or edit it.
34
The file `configure.ac' (or `configure.in') is used to create
35
`configure' by a program called `autoconf'. You only need
36
`configure.ac' if you want to change it or regenerate `configure' using
37
a newer version of `autoconf'.
39
The simplest way to compile this package is:
41
1. `cd' to the directory containing the package's source code and type
42
`./configure' to configure the package for your system. If you're
43
using `csh' on an old version of System V, you might need to type
44
`sh ./configure' instead to prevent `csh' from trying to execute
47
Running `configure' takes awhile. While running, it prints some
48
messages telling which features it is checking for.
50
2. Type `make' to compile the package.
52
3. Optionally, type `make check' to run any self-tests that come with
55
4. Type `make install' to install the programs and any data files and
58
5. You can remove the program binaries and object files from the
59
source code directory by typing `make clean'. To also remove the
60
files that `configure' created (so you can compile the package for
61
a different kind of computer), type `make distclean'. There is
62
also a `make maintainer-clean' target, but that is intended mainly
63
for the package's developers. If you use it, you may have to get
64
all sorts of other programs in order to regenerate files that came
65
with the distribution.
70
Some systems require unusual options for compilation or linking that
71
the `configure' script does not know about. Run `./configure --help'
72
for details on some of the pertinent environment variables.
74
You can give `configure' initial values for configuration parameters
75
by setting variables in the command line or in the environment. Here
78
./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
80
*Note Defining Variables::, for more details.
82
Compiling For Multiple Architectures
83
====================================
85
You can compile the package for more than one kind of computer at the
86
same time, by placing the object files for each architecture in their
87
own directory. To do this, you must use a version of `make' that
88
supports the `VPATH' variable, such as GNU `make'. `cd' to the
89
directory where you want the object files and executables to go and run
90
the `configure' script. `configure' automatically checks for the
91
source code in the directory that `configure' is in and in `..'.
93
If you have to use a `make' that does not support the `VPATH'
94
variable, you have to compile the package for one architecture at a
95
time in the source code directory. After you have installed the
96
package for one architecture, use `make distclean' before reconfiguring
97
for another architecture.
102
By default, `make install' will install the package's files in
103
`/usr/local/bin', `/usr/local/man', etc. You can specify an
104
installation prefix other than `/usr/local' by giving `configure' the
105
option `--prefix=PATH'.
107
You can specify separate installation prefixes for
108
architecture-specific files and architecture-independent files. If you
109
give `configure' the option `--exec-prefix=PATH', the package will use
110
PATH as the prefix for installing programs and libraries.
111
Documentation and other data files will still use the regular prefix.
113
In addition, if you use an unusual directory layout you can give
114
options like `--bindir=PATH' to specify different values for particular
115
kinds of files. Run `configure --help' for a list of the directories
116
you can set and what kinds of files go in them.
118
If the package supports it, you can cause programs to be installed
119
with an extra prefix or suffix on their names by giving `configure' the
120
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
125
Some packages pay attention to `--enable-FEATURE' options to
126
`configure', where FEATURE indicates an optional part of the package.
127
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
128
is something like `gnu-as' or `x' (for the X Window System). The
129
`README' should mention any `--enable-' and `--with-' options that the
132
For packages that use the X Window System, `configure' can usually
133
find the X include and library files automatically, but if it doesn't,
134
you can use the `configure' options `--x-includes=DIR' and
135
`--x-libraries=DIR' to specify their locations.
137
Specifying the System Type
138
==========================
140
There may be some features `configure' cannot figure out
141
automatically, but needs to determine by the type of machine the package
142
will run on. Usually, assuming the package is built to be run on the
143
_same_ architectures, `configure' can figure that out, but if it prints
144
a message saying it cannot guess the machine type, give it the
145
`--build=TYPE' option. TYPE can either be a short name for the system
146
type, such as `sun4', or a canonical name which has the form:
150
where SYSTEM can have one of these forms:
154
See the file `config.sub' for the possible values of each field. If
155
`config.sub' isn't included in this package, then this package doesn't
156
need to know the machine type.
158
If you are _building_ compiler tools for cross-compiling, you should
159
use the `--target=TYPE' option to select the type of system they will
162
If you want to _use_ a cross compiler, that generates code for a
163
platform different from the build platform, you should specify the
164
"host" platform (i.e., that on which the generated programs will
165
eventually be run) with `--host=TYPE'.
170
If you want to set default values for `configure' scripts to share,
171
you can create a site shell script called `config.site' that gives
172
default values for variables like `CC', `cache_file', and `prefix'.
173
`configure' looks for `PREFIX/share/config.site' if it exists, then
174
`PREFIX/etc/config.site' if it exists. Or, you can set the
175
`CONFIG_SITE' environment variable to the location of the site script.
176
A warning: not all `configure' scripts look for a site script.
181
Variables not defined in a site shell script can be set in the
182
environment passed to `configure'. However, some packages may run
183
configure again during the build, and the customized values of these
184
variables may be lost. In order to avoid this problem, you should set
185
them in the `configure' command line, using `VAR=value'. For example:
187
./configure CC=/usr/local2/bin/gcc
189
will cause the specified gcc to be used as the C compiler (unless it is
190
overridden in the site shell script).
192
`configure' Invocation
193
======================
195
`configure' recognizes the following options to control how it
200
Print a summary of the options to `configure', and exit.
204
Print the version of Autoconf used to generate the `configure'
208
Enable the cache: use and save the results of the tests in FILE,
209
traditionally `config.cache'. FILE defaults to `/dev/null' to
214
Alias for `--cache-file=config.cache'.
219
Do not print messages saying which checks are being made. To
220
suppress all normal output, redirect it to `/dev/null' (any error
221
messages will still be shown).
224
Look for the package's source code in directory DIR. Usually
225
`configure' can determine that directory automatically.
227
`configure' also accepts some other, not widely useful, options. Run
228
`configure --help' for more details.