3
* sep_driver.c - Security Processor Driver main group of functions
5
* Copyright(c) 2009,2010 Intel Corporation. All rights reserved.
6
* Contributions(c) 2009,2010 Discretix. All rights reserved.
8
* This program is free software; you can redistribute it and/or modify it
9
* under the terms of the GNU General Public License as published by the Free
10
* Software Foundation; version 2 of the License.
12
* This program is distributed in the hope that it will be useful, but WITHOUT
13
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17
* You should have received a copy of the GNU General Public License along with
18
* this program; if not, write to the Free Software Foundation, Inc., 59
19
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23
* Mark Allyn mark.a.allyn@intel.com
24
* Jayant Mangalampalli jayant.mangalampalli@intel.com
28
* 2009.06.26 Initial publish
29
* 2010.09.14 Upgrade to Medfield
32
#include <linux/init.h>
33
#include <linux/module.h>
34
#include <linux/miscdevice.h>
36
#include <linux/cdev.h>
37
#include <linux/kdev_t.h>
38
#include <linux/mutex.h>
39
#include <linux/sched.h>
41
#include <linux/poll.h>
42
#include <linux/wait.h>
43
#include <linux/pci.h>
44
#include <linux/firmware.h>
45
#include <linux/slab.h>
46
#include <linux/ioctl.h>
47
#include <asm/current.h>
48
#include <linux/ioport.h>
50
#include <linux/interrupt.h>
51
#include <linux/pagemap.h>
52
#include <asm/cacheflush.h>
53
#include <linux/delay.h>
54
#include <linux/jiffies.h>
55
#include <linux/rar_register.h>
57
#include "sep_driver_hw_defs.h"
58
#include "sep_driver_config.h"
59
#include "sep_driver_api.h"
62
/*----------------------------------------
64
-----------------------------------------*/
66
#define SEP_RAR_IO_MEM_REGION_SIZE 0x40000
68
/*--------------------------------------------
70
--------------------------------------------*/
72
/* Keep this a single static object for now to keep the conversion easy */
74
static struct sep_device *sep_dev;
77
* sep_dump_message - dump the message that is pending
80
static void sep_dump_message(struct sep_device *sep)
83
u32 *p = sep->shared_addr;
84
for (count = 0; count < 12 * 4; count += 4)
85
dev_dbg(&sep->pdev->dev, "Word %d of the message is %x\n",
90
* sep_map_and_alloc_shared_area - allocate shared block
91
* @sep: security processor
92
* @size: size of shared area
94
static int sep_map_and_alloc_shared_area(struct sep_device *sep)
96
sep->shared_addr = dma_alloc_coherent(&sep->pdev->dev,
98
&sep->shared_bus, GFP_KERNEL);
100
if (!sep->shared_addr) {
101
dev_warn(&sep->pdev->dev,
102
"shared memory dma_alloc_coherent failed\n");
105
dev_dbg(&sep->pdev->dev,
106
"shared_addr %zx bytes @%p (bus %llx)\n",
107
sep->shared_size, sep->shared_addr,
108
(unsigned long long)sep->shared_bus);
113
* sep_unmap_and_free_shared_area - free shared block
114
* @sep: security processor
116
static void sep_unmap_and_free_shared_area(struct sep_device *sep)
118
dma_free_coherent(&sep->pdev->dev, sep->shared_size,
119
sep->shared_addr, sep->shared_bus);
123
* sep_shared_bus_to_virt - convert bus/virt addresses
124
* @sep: pointer to struct sep_device
125
* @bus_address: address to convert
127
* Returns virtual address inside the shared area according
128
* to the bus address.
130
static void *sep_shared_bus_to_virt(struct sep_device *sep,
131
dma_addr_t bus_address)
133
return sep->shared_addr + (bus_address - sep->shared_bus);
137
* open function for the singleton driver
138
* @inode_ptr struct inode *
139
* @file_ptr struct file *
141
* Called when the user opens the singleton device interface
143
static int sep_singleton_open(struct inode *inode_ptr, struct file *file_ptr)
145
struct sep_device *sep;
148
* Get the SEP device structure and use it for the
149
* private_data field in filp for other methods
153
file_ptr->private_data = sep;
155
if (test_and_set_bit(0, &sep->singleton_access_flag))
161
* sep_open - device open method
162
* @inode: inode of SEP device
163
* @filp: file handle to SEP device
165
* Open method for the SEP device. Called when userspace opens
166
* the SEP device node.
168
* Returns zero on success otherwise an error code.
170
static int sep_open(struct inode *inode, struct file *filp)
172
struct sep_device *sep;
175
* Get the SEP device structure and use it for the
176
* private_data field in filp for other methods
179
filp->private_data = sep;
181
/* Anyone can open; locking takes place at transaction level */
186
* sep_singleton_release - close a SEP singleton device
187
* @inode: inode of SEP device
188
* @filp: file handle being closed
190
* Called on the final close of a SEP device. As the open protects against
191
* multiple simultaenous opens that means this method is called when the
192
* final reference to the open handle is dropped.
194
static int sep_singleton_release(struct inode *inode, struct file *filp)
196
struct sep_device *sep = filp->private_data;
198
clear_bit(0, &sep->singleton_access_flag);
203
* sep_request_daemon_open - request daemon open method
204
* @inode: inode of SEP device
205
* @filp: file handle to SEP device
207
* Open method for the SEP request daemon. Called when
208
* request daemon in userspace opens the SEP device node.
210
* Returns zero on success otherwise an error code.
212
static int sep_request_daemon_open(struct inode *inode, struct file *filp)
214
struct sep_device *sep = sep_dev;
217
filp->private_data = sep;
219
/* There is supposed to be only one request daemon */
220
if (test_and_set_bit(0, &sep->request_daemon_open))
226
* sep_request_daemon_release - close a SEP daemon
227
* @inode: inode of SEP device
228
* @filp: file handle being closed
230
* Called on the final close of a SEP daemon.
232
static int sep_request_daemon_release(struct inode *inode, struct file *filp)
234
struct sep_device *sep = filp->private_data;
236
dev_dbg(&sep->pdev->dev, "Request daemon release for pid %d\n",
239
/* Clear the request_daemon_open flag */
240
clear_bit(0, &sep->request_daemon_open);
245
* sep_req_daemon_send_reply_command_handler - poke the SEP
246
* @sep: struct sep_device *
248
* This function raises interrupt to SEPm that signals that is has a
249
* new command from HOST
251
static int sep_req_daemon_send_reply_command_handler(struct sep_device *sep)
253
unsigned long lck_flags;
255
sep_dump_message(sep);
257
/* Counters are lockable region */
258
spin_lock_irqsave(&sep->snd_rply_lck, lck_flags);
262
/* Send the interrupt to SEP */
263
sep_write_reg(sep, HW_HOST_HOST_SEP_GPR2_REG_ADDR, sep->send_ct);
266
spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
268
dev_dbg(&sep->pdev->dev,
269
"sep_req_daemon_send_reply send_ct %lx reply_ct %lx\n",
270
sep->send_ct, sep->reply_ct);
277
* sep_free_dma_table_data_handler - free DMA table
278
* @sep: pointere to struct sep_device
280
* Handles the request to free DMA table for synchronic actions
282
static int sep_free_dma_table_data_handler(struct sep_device *sep)
286
/* Pointer to the current dma_resource struct */
287
struct sep_dma_resource *dma;
289
for (dcb_counter = 0; dcb_counter < sep->nr_dcb_creat; dcb_counter++) {
290
dma = &sep->dma_res_arr[dcb_counter];
292
/* Unmap and free input map array */
293
if (dma->in_map_array) {
294
for (count = 0; count < dma->in_num_pages; count++) {
295
dma_unmap_page(&sep->pdev->dev,
296
dma->in_map_array[count].dma_addr,
297
dma->in_map_array[count].size,
300
kfree(dma->in_map_array);
303
/* Unmap output map array, DON'T free it yet */
304
if (dma->out_map_array) {
305
for (count = 0; count < dma->out_num_pages; count++) {
306
dma_unmap_page(&sep->pdev->dev,
307
dma->out_map_array[count].dma_addr,
308
dma->out_map_array[count].size,
311
kfree(dma->out_map_array);
314
/* Free page cache for output */
315
if (dma->in_page_array) {
316
for (count = 0; count < dma->in_num_pages; count++) {
317
flush_dcache_page(dma->in_page_array[count]);
318
page_cache_release(dma->in_page_array[count]);
320
kfree(dma->in_page_array);
323
if (dma->out_page_array) {
324
for (count = 0; count < dma->out_num_pages; count++) {
325
if (!PageReserved(dma->out_page_array[count]))
326
SetPageDirty(dma->out_page_array[count]);
327
flush_dcache_page(dma->out_page_array[count]);
328
page_cache_release(dma->out_page_array[count]);
330
kfree(dma->out_page_array);
333
/* Reset all the values */
334
dma->in_page_array = NULL;
335
dma->out_page_array = NULL;
336
dma->in_num_pages = 0;
337
dma->out_num_pages = 0;
338
dma->in_map_array = NULL;
339
dma->out_map_array = NULL;
340
dma->in_map_num_entries = 0;
341
dma->out_map_num_entries = 0;
344
sep->nr_dcb_creat = 0;
345
sep->num_lli_tables_created = 0;
351
* sep_request_daemon_mmap - maps the shared area to user space
352
* @filp: pointer to struct file
353
* @vma: pointer to vm_area_struct
355
* Called by the kernel when the daemon attempts an mmap() syscall
358
static int sep_request_daemon_mmap(struct file *filp,
359
struct vm_area_struct *vma)
361
struct sep_device *sep = filp->private_data;
362
dma_addr_t bus_address;
365
if ((vma->vm_end - vma->vm_start) > SEP_DRIVER_MMMAP_AREA_SIZE) {
370
/* Get physical address */
371
bus_address = sep->shared_bus;
373
if (remap_pfn_range(vma, vma->vm_start, bus_address >> PAGE_SHIFT,
374
vma->vm_end - vma->vm_start, vma->vm_page_prot)) {
376
dev_warn(&sep->pdev->dev, "remap_page_range failed\n");
386
* sep_request_daemon_poll - poll implementation
387
* @sep: struct sep_device * for current SEP device
388
* @filp: struct file * for open file
389
* @wait: poll_table * for poll
391
* Called when our device is part of a poll() or select() syscall
393
static unsigned int sep_request_daemon_poll(struct file *filp,
399
unsigned long lck_flags;
400
struct sep_device *sep = filp->private_data;
402
poll_wait(filp, &sep->event_request_daemon, wait);
404
dev_dbg(&sep->pdev->dev, "daemon poll: send_ct is %lx reply ct is %lx\n",
405
sep->send_ct, sep->reply_ct);
407
spin_lock_irqsave(&sep->snd_rply_lck, lck_flags);
408
/* Check if the data is ready */
409
if (sep->send_ct == sep->reply_ct) {
410
spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
412
retval2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
413
dev_dbg(&sep->pdev->dev,
414
"daemon poll: data check (GPR2) is %x\n", retval2);
416
/* Check if PRINT request */
417
if ((retval2 >> 30) & 0x1) {
418
dev_dbg(&sep->pdev->dev, "daemon poll: PRINTF request in\n");
422
/* Check if NVS request */
424
dev_dbg(&sep->pdev->dev, "daemon poll: NVS request in\n");
425
mask |= POLLPRI | POLLWRNORM;
428
spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
429
dev_dbg(&sep->pdev->dev,
430
"daemon poll: no reply received; returning 0\n");
438
* sep_release - close a SEP device
439
* @inode: inode of SEP device
440
* @filp: file handle being closed
442
* Called on the final close of a SEP device.
444
static int sep_release(struct inode *inode, struct file *filp)
446
struct sep_device *sep = filp->private_data;
448
dev_dbg(&sep->pdev->dev, "Release for pid %d\n", current->pid);
450
mutex_lock(&sep->sep_mutex);
451
/* Is this the process that has a transaction open?
452
* If so, lets reset pid_doing_transaction to 0 and
453
* clear the in use flags, and then wake up sep_event
454
* so that other processes can do transactions
456
if (sep->pid_doing_transaction == current->pid) {
457
clear_bit(SEP_MMAP_LOCK_BIT, &sep->in_use_flags);
458
clear_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags);
459
sep_free_dma_table_data_handler(sep);
460
wake_up(&sep->event);
461
sep->pid_doing_transaction = 0;
464
mutex_unlock(&sep->sep_mutex);
469
* sep_mmap - maps the shared area to user space
470
* @filp: pointer to struct file
471
* @vma: pointer to vm_area_struct
473
* Called on an mmap of our space via the normal SEP device
475
static int sep_mmap(struct file *filp, struct vm_area_struct *vma)
478
struct sep_device *sep = filp->private_data;
479
unsigned long error = 0;
481
/* Set the transaction busy (own the device) */
482
wait_event_interruptible(sep->event,
483
test_and_set_bit(SEP_MMAP_LOCK_BIT,
484
&sep->in_use_flags) == 0);
486
if (signal_pending(current)) {
488
goto end_function_with_error;
491
* The pid_doing_transaction indicates that this process
492
* now owns the facilities to performa a transaction with
493
* the SEP. While this process is performing a transaction,
494
* no other process who has the SEP device open can perform
495
* any transactions. This method allows more than one process
496
* to have the device open at any given time, which provides
497
* finer granularity for device utilization by multiple
500
mutex_lock(&sep->sep_mutex);
501
sep->pid_doing_transaction = current->pid;
502
mutex_unlock(&sep->sep_mutex);
504
/* Zero the pools and the number of data pool alocation pointers */
505
sep->data_pool_bytes_allocated = 0;
506
sep->num_of_data_allocations = 0;
509
* Check that the size of the mapped range is as the size of the message
512
if ((vma->vm_end - vma->vm_start) > SEP_DRIVER_MMMAP_AREA_SIZE) {
514
goto end_function_with_error;
517
dev_dbg(&sep->pdev->dev, "shared_addr is %p\n", sep->shared_addr);
519
/* Get bus address */
520
bus_addr = sep->shared_bus;
522
if (remap_pfn_range(vma, vma->vm_start, bus_addr >> PAGE_SHIFT,
523
vma->vm_end - vma->vm_start, vma->vm_page_prot)) {
524
dev_warn(&sep->pdev->dev, "remap_page_range failed\n");
526
goto end_function_with_error;
530
end_function_with_error:
532
clear_bit(SEP_MMAP_LOCK_BIT, &sep->in_use_flags);
533
mutex_lock(&sep->sep_mutex);
534
sep->pid_doing_transaction = 0;
535
mutex_unlock(&sep->sep_mutex);
537
/* Raise event for stuck contextes */
539
wake_up(&sep->event);
546
* sep_poll - poll handler
547
* @filp: pointer to struct file
548
* @wait: pointer to poll_table
550
* Called by the OS when the kernel is asked to do a poll on
553
static unsigned int sep_poll(struct file *filp, poll_table *wait)
558
unsigned long lck_flags;
560
struct sep_device *sep = filp->private_data;
562
/* Am I the process that owns the transaction? */
563
mutex_lock(&sep->sep_mutex);
564
if (current->pid != sep->pid_doing_transaction) {
565
dev_dbg(&sep->pdev->dev, "poll; wrong pid\n");
567
mutex_unlock(&sep->sep_mutex);
570
mutex_unlock(&sep->sep_mutex);
572
/* Check if send command or send_reply were activated previously */
573
if (!test_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags)) {
578
/* Add the event to the polling wait table */
579
dev_dbg(&sep->pdev->dev, "poll: calling wait sep_event\n");
581
poll_wait(filp, &sep->event, wait);
583
dev_dbg(&sep->pdev->dev, "poll: send_ct is %lx reply ct is %lx\n",
584
sep->send_ct, sep->reply_ct);
586
/* Check if error occurred during poll */
587
retval2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
588
if (retval2 != 0x0) {
589
dev_warn(&sep->pdev->dev, "poll; poll error %x\n", retval2);
594
spin_lock_irqsave(&sep->snd_rply_lck, lck_flags);
596
if (sep->send_ct == sep->reply_ct) {
597
spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
598
retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
599
dev_dbg(&sep->pdev->dev, "poll: data ready check (GPR2) %x\n",
602
/* Check if printf request */
603
if ((retval >> 30) & 0x1) {
604
dev_dbg(&sep->pdev->dev, "poll: SEP printf request\n");
605
wake_up(&sep->event_request_daemon);
609
/* Check if the this is SEP reply or request */
611
dev_dbg(&sep->pdev->dev, "poll: SEP request\n");
612
wake_up(&sep->event_request_daemon);
614
dev_dbg(&sep->pdev->dev, "poll: normal return\n");
615
/* In case it is again by send_reply_comand */
616
clear_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags);
617
sep_dump_message(sep);
618
dev_dbg(&sep->pdev->dev,
619
"poll; SEP reply POLLIN | POLLRDNORM\n");
620
mask |= POLLIN | POLLRDNORM;
623
spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
624
dev_dbg(&sep->pdev->dev,
625
"poll; no reply received; returning mask of 0\n");
634
* sep_time_address - address in SEP memory of time
635
* @sep: SEP device we want the address from
637
* Return the address of the two dwords in memory used for time
640
static u32 *sep_time_address(struct sep_device *sep)
642
return sep->shared_addr + SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES;
646
* sep_set_time - set the SEP time
647
* @sep: the SEP we are setting the time for
649
* Calculates time and sets it at the predefined address.
650
* Called with the SEP mutex held.
652
static unsigned long sep_set_time(struct sep_device *sep)
655
u32 *time_addr; /* Address of time as seen by the kernel */
658
do_gettimeofday(&time);
660
/* Set value in the SYSTEM MEMORY offset */
661
time_addr = sep_time_address(sep);
663
time_addr[0] = SEP_TIME_VAL_TOKEN;
664
time_addr[1] = time.tv_sec;
666
dev_dbg(&sep->pdev->dev, "time.tv_sec is %lu\n", time.tv_sec);
667
dev_dbg(&sep->pdev->dev, "time_addr is %p\n", time_addr);
668
dev_dbg(&sep->pdev->dev, "sep->shared_addr is %p\n", sep->shared_addr);
674
* sep_set_caller_id_handler - insert caller id entry
676
* @arg: pointer to struct caller_id_struct
678
* Inserts the data into the caller id table. Note that this function
679
* falls under the ioctl lock
681
static int sep_set_caller_id_handler(struct sep_device *sep, unsigned long arg)
686
struct caller_id_struct command_args;
688
for (i = 0; i < SEP_CALLER_ID_TABLE_NUM_ENTRIES; i++) {
689
if (sep->caller_id_table[i].pid == 0)
693
if (i == SEP_CALLER_ID_TABLE_NUM_ENTRIES) {
694
dev_dbg(&sep->pdev->dev, "no more caller id entries left\n");
695
dev_dbg(&sep->pdev->dev, "maximum number is %d\n",
696
SEP_CALLER_ID_TABLE_NUM_ENTRIES);
702
if (copy_from_user(&command_args, (void __user *)arg,
703
sizeof(command_args))) {
708
hash = (void __user *)(unsigned long)command_args.callerIdAddress;
710
if (!command_args.pid || !command_args.callerIdSizeInBytes) {
715
dev_dbg(&sep->pdev->dev, "pid is %x\n", command_args.pid);
716
dev_dbg(&sep->pdev->dev, "callerIdSizeInBytes is %x\n",
717
command_args.callerIdSizeInBytes);
719
if (command_args.callerIdSizeInBytes >
720
SEP_CALLER_ID_HASH_SIZE_IN_BYTES) {
725
sep->caller_id_table[i].pid = command_args.pid;
727
if (copy_from_user(sep->caller_id_table[i].callerIdHash,
728
hash, command_args.callerIdSizeInBytes))
735
* sep_set_current_caller_id - set the caller id
736
* @sep: pointer to struct_sep_device
738
* Set the caller ID (if it exists) to the SEP. Note that this
739
* function falls under the ioctl lock
741
static int sep_set_current_caller_id(struct sep_device *sep)
746
/* Zero the previous value */
747
memset(sep->shared_addr + SEP_CALLER_ID_OFFSET_BYTES,
748
0, SEP_CALLER_ID_HASH_SIZE_IN_BYTES);
750
for (i = 0; i < SEP_CALLER_ID_TABLE_NUM_ENTRIES; i++) {
751
if (sep->caller_id_table[i].pid == current->pid) {
752
dev_dbg(&sep->pdev->dev, "Caller Id found\n");
754
memcpy(sep->shared_addr + SEP_CALLER_ID_OFFSET_BYTES,
755
(void *)(sep->caller_id_table[i].callerIdHash),
756
SEP_CALLER_ID_HASH_SIZE_IN_BYTES);
760
/* Ensure data is in little endian */
761
hash_buf_ptr = (u32 *)sep->shared_addr +
762
SEP_CALLER_ID_OFFSET_BYTES;
764
for (i = 0; i < SEP_CALLER_ID_HASH_SIZE_IN_WORDS; i++)
765
hash_buf_ptr[i] = cpu_to_le32(hash_buf_ptr[i]);
771
* sep_send_command_handler - kick off a command
772
* @sep: SEP being signalled
774
* This function raises interrupt to SEP that signals that is has a new
775
* command from the host
777
* Note that this function does fall under the ioctl lock
779
static int sep_send_command_handler(struct sep_device *sep)
781
unsigned long lck_flags;
784
if (test_and_set_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags)) {
790
sep_set_current_caller_id(sep);
792
sep_dump_message(sep);
795
spin_lock_irqsave(&sep->snd_rply_lck, lck_flags);
797
spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
799
dev_dbg(&sep->pdev->dev,
800
"sep_send_command_handler send_ct %lx reply_ct %lx\n",
801
sep->send_ct, sep->reply_ct);
803
/* Send interrupt to SEP */
804
sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x2);
811
* sep_allocate_data_pool_memory_handler -allocate pool memory
812
* @sep: pointer to struct sep_device
813
* @arg: pointer to struct alloc_struct
815
* This function handles the allocate data pool memory request
816
* This function returns calculates the bus address of the
817
* allocated memory, and the offset of this area from the mapped address.
818
* Therefore, the FVOs in user space can calculate the exact virtual
819
* address of this allocated memory
821
static int sep_allocate_data_pool_memory_handler(struct sep_device *sep,
825
struct alloc_struct command_args;
827
/* Holds the allocated buffer address in the system memory pool */
830
if (copy_from_user(&command_args, (void __user *)arg,
831
sizeof(struct alloc_struct))) {
836
/* Allocate memory */
837
if ((sep->data_pool_bytes_allocated + command_args.num_bytes) >
838
SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) {
843
dev_dbg(&sep->pdev->dev,
844
"data pool bytes_allocated: %x\n", (int)sep->data_pool_bytes_allocated);
845
dev_dbg(&sep->pdev->dev,
846
"offset: %x\n", SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES);
847
/* Set the virtual and bus address */
848
command_args.offset = SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES +
849
sep->data_pool_bytes_allocated;
851
/* Place in the shared area that is known by the SEP */
852
token_addr = (u32 *)(sep->shared_addr +
853
SEP_DRIVER_DATA_POOL_ALLOCATION_OFFSET_IN_BYTES +
854
(sep->num_of_data_allocations)*2*sizeof(u32));
856
token_addr[0] = SEP_DATA_POOL_POINTERS_VAL_TOKEN;
857
token_addr[1] = (u32)sep->shared_bus +
858
SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES +
859
sep->data_pool_bytes_allocated;
861
/* Write the memory back to the user space */
862
error = copy_to_user((void *)arg, (void *)&command_args,
863
sizeof(struct alloc_struct));
869
/* Update the allocation */
870
sep->data_pool_bytes_allocated += command_args.num_bytes;
871
sep->num_of_data_allocations += 1;
878
* sep_lock_kernel_pages - map kernel pages for DMA
879
* @sep: pointer to struct sep_device
880
* @kernel_virt_addr: address of data buffer in kernel
881
* @data_size: size of data
882
* @lli_array_ptr: lli array
883
* @in_out_flag: input into device or output from device
885
* This function locks all the physical pages of the kernel virtual buffer
886
* and construct a basic lli array, where each entry holds the physical
887
* page address and the size that application data holds in this page
888
* This function is used only during kernel crypto mod calls from within
889
* the kernel (when ioctl is not used)
891
static int sep_lock_kernel_pages(struct sep_device *sep,
892
unsigned long kernel_virt_addr,
894
struct sep_lli_entry **lli_array_ptr,
900
struct sep_lli_entry *lli_array;
902
struct sep_dma_map *map_array;
904
dev_dbg(&sep->pdev->dev, "lock kernel pages kernel_virt_addr is %08lx\n",
905
(unsigned long)kernel_virt_addr);
906
dev_dbg(&sep->pdev->dev, "data_size is %x\n", data_size);
908
lli_array = kmalloc(sizeof(struct sep_lli_entry), GFP_ATOMIC);
913
map_array = kmalloc(sizeof(struct sep_dma_map), GFP_ATOMIC);
916
goto end_function_with_error;
919
map_array[0].dma_addr =
920
dma_map_single(&sep->pdev->dev, (void *)kernel_virt_addr,
921
data_size, DMA_BIDIRECTIONAL);
922
map_array[0].size = data_size;
926
* Set the start address of the first page - app data may start not at
927
* the beginning of the page
929
lli_array[0].bus_address = (u32)map_array[0].dma_addr;
930
lli_array[0].block_size = map_array[0].size;
932
dev_dbg(&sep->pdev->dev,
933
"lli_array[0].bus_address is %08lx, lli_array[0].block_size is %x\n",
934
(unsigned long)lli_array[0].bus_address,
935
lli_array[0].block_size);
937
/* Set the output parameters */
938
if (in_out_flag == SEP_DRIVER_IN_FLAG) {
939
*lli_array_ptr = lli_array;
940
sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages = 1;
941
sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = NULL;
942
sep->dma_res_arr[sep->nr_dcb_creat].in_map_array = map_array;
943
sep->dma_res_arr[sep->nr_dcb_creat].in_map_num_entries = 1;
945
*lli_array_ptr = lli_array;
946
sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages = 1;
947
sep->dma_res_arr[sep->nr_dcb_creat].out_page_array = NULL;
948
sep->dma_res_arr[sep->nr_dcb_creat].out_map_array = map_array;
949
sep->dma_res_arr[sep->nr_dcb_creat].out_map_num_entries = 1;
953
end_function_with_error:
961
* sep_lock_user_pages - lock and map user pages for DMA
962
* @sep: pointer to struct sep_device
963
* @app_virt_addr: user memory data buffer
964
* @data_size: size of data buffer
965
* @lli_array_ptr: lli array
966
* @in_out_flag: input or output to device
968
* This function locks all the physical pages of the application
969
* virtual buffer and construct a basic lli array, where each entry
970
* holds the physical page address and the size that application
971
* data holds in this physical pages
973
static int sep_lock_user_pages(struct sep_device *sep,
976
struct sep_lli_entry **lli_array_ptr,
983
/* The the page of the end address of the user space buffer */
985
/* The page of the start address of the user space buffer */
987
/* The range in pages */
989
/* Array of pointers to page */
990
struct page **page_array;
992
struct sep_lli_entry *lli_array;
994
struct sep_dma_map *map_array;
995
/* Direction of the DMA mapping for locked pages */
996
enum dma_data_direction dir;
998
/* Set start and end pages and num pages */
999
end_page = (app_virt_addr + data_size - 1) >> PAGE_SHIFT;
1000
start_page = app_virt_addr >> PAGE_SHIFT;
1001
num_pages = end_page - start_page + 1;
1003
dev_dbg(&sep->pdev->dev, "lock user pages app_virt_addr is %x\n", app_virt_addr);
1004
dev_dbg(&sep->pdev->dev, "data_size is %x\n", data_size);
1005
dev_dbg(&sep->pdev->dev, "start_page is %x\n", start_page);
1006
dev_dbg(&sep->pdev->dev, "end_page is %x\n", end_page);
1007
dev_dbg(&sep->pdev->dev, "num_pages is %x\n", num_pages);
1009
/* Allocate array of pages structure pointers */
1010
page_array = kmalloc(sizeof(struct page *) * num_pages, GFP_ATOMIC);
1015
map_array = kmalloc(sizeof(struct sep_dma_map) * num_pages, GFP_ATOMIC);
1017
dev_warn(&sep->pdev->dev, "kmalloc for map_array failed\n");
1019
goto end_function_with_error1;
1022
lli_array = kmalloc(sizeof(struct sep_lli_entry) * num_pages,
1026
dev_warn(&sep->pdev->dev, "kmalloc for lli_array failed\n");
1028
goto end_function_with_error2;
1031
/* Convert the application virtual address into a set of physical */
1032
down_read(¤t->mm->mmap_sem);
1033
result = get_user_pages(current, current->mm, app_virt_addr,
1035
((in_out_flag == SEP_DRIVER_IN_FLAG) ? 0 : 1),
1036
0, page_array, NULL);
1038
up_read(¤t->mm->mmap_sem);
1040
/* Check the number of pages locked - if not all then exit with error */
1041
if (result != num_pages) {
1042
dev_warn(&sep->pdev->dev,
1043
"not all pages locked by get_user_pages\n");
1045
goto end_function_with_error3;
1048
dev_dbg(&sep->pdev->dev, "get_user_pages succeeded\n");
1051
if (in_out_flag == SEP_DRIVER_IN_FLAG)
1052
dir = DMA_TO_DEVICE;
1054
dir = DMA_FROM_DEVICE;
1057
* Fill the array using page array data and
1058
* map the pages - this action will also flush the cache as needed
1060
for (count = 0; count < num_pages; count++) {
1061
/* Fill the map array */
1062
map_array[count].dma_addr =
1063
dma_map_page(&sep->pdev->dev, page_array[count],
1064
0, PAGE_SIZE, /*dir*/DMA_BIDIRECTIONAL);
1066
map_array[count].size = PAGE_SIZE;
1068
/* Fill the lli array entry */
1069
lli_array[count].bus_address = (u32)map_array[count].dma_addr;
1070
lli_array[count].block_size = PAGE_SIZE;
1072
dev_warn(&sep->pdev->dev, "lli_array[%x].bus_address is %08lx, lli_array[%x].block_size is %x\n",
1073
count, (unsigned long)lli_array[count].bus_address,
1074
count, lli_array[count].block_size);
1077
/* Check the offset for the first page */
1078
lli_array[0].bus_address =
1079
lli_array[0].bus_address + (app_virt_addr & (~PAGE_MASK));
1081
/* Check that not all the data is in the first page only */
1082
if ((PAGE_SIZE - (app_virt_addr & (~PAGE_MASK))) >= data_size)
1083
lli_array[0].block_size = data_size;
1085
lli_array[0].block_size =
1086
PAGE_SIZE - (app_virt_addr & (~PAGE_MASK));
1088
dev_dbg(&sep->pdev->dev,
1089
"lli_array[0].bus_address is %08lx, lli_array[0].block_size is %x\n",
1090
(unsigned long)lli_array[count].bus_address,
1091
lli_array[count].block_size);
1093
/* Check the size of the last page */
1094
if (num_pages > 1) {
1095
lli_array[num_pages - 1].block_size =
1096
(app_virt_addr + data_size) & (~PAGE_MASK);
1097
if (lli_array[num_pages - 1].block_size == 0)
1098
lli_array[num_pages - 1].block_size = PAGE_SIZE;
1100
dev_warn(&sep->pdev->dev,
1101
"lli_array[%x].bus_address is "
1102
"%08lx, lli_array[%x].block_size is %x\n",
1104
(unsigned long)lli_array[num_pages - 1].bus_address,
1106
lli_array[num_pages - 1].block_size);
1109
/* Set output params according to the in_out flag */
1110
if (in_out_flag == SEP_DRIVER_IN_FLAG) {
1111
*lli_array_ptr = lli_array;
1112
sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages = num_pages;
1113
sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = page_array;
1114
sep->dma_res_arr[sep->nr_dcb_creat].in_map_array = map_array;
1115
sep->dma_res_arr[sep->nr_dcb_creat].in_map_num_entries =
1118
*lli_array_ptr = lli_array;
1119
sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages = num_pages;
1120
sep->dma_res_arr[sep->nr_dcb_creat].out_page_array =
1122
sep->dma_res_arr[sep->nr_dcb_creat].out_map_array = map_array;
1123
sep->dma_res_arr[sep->nr_dcb_creat].out_map_num_entries =
1128
end_function_with_error3:
1129
/* Free lli array */
1132
end_function_with_error2:
1135
end_function_with_error1:
1136
/* Free page array */
1144
* u32 sep_calculate_lli_table_max_size - size the LLI table
1145
* @sep: pointer to struct sep_device
1147
* @num_array_entries
1150
* This function calculates the size of data that can be inserted into
1151
* the lli table from this array, such that either the table is full
1152
* (all entries are entered), or there are no more entries in the
1155
static u32 sep_calculate_lli_table_max_size(struct sep_device *sep,
1156
struct sep_lli_entry *lli_in_array_ptr,
1157
u32 num_array_entries,
1158
u32 *last_table_flag)
1161
/* Table data size */
1162
u32 table_data_size = 0;
1163
/* Data size for the next table */
1164
u32 next_table_data_size;
1166
*last_table_flag = 0;
1169
* Calculate the data in the out lli table till we fill the whole
1170
* table or till the data has ended
1173
(counter < (SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP - 1)) &&
1174
(counter < num_array_entries); counter++)
1175
table_data_size += lli_in_array_ptr[counter].block_size;
1178
* Check if we reached the last entry,
1179
* meaning this ia the last table to build,
1180
* and no need to check the block alignment
1182
if (counter == num_array_entries) {
1183
/* Set the last table flag */
1184
*last_table_flag = 1;
1189
* Calculate the data size of the next table.
1190
* Stop if no entries left or if data size is more the DMA restriction
1192
next_table_data_size = 0;
1193
for (; counter < num_array_entries; counter++) {
1194
next_table_data_size += lli_in_array_ptr[counter].block_size;
1195
if (next_table_data_size >= SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE)
1200
* Check if the next table data size is less then DMA rstriction.
1201
* if it is - recalculate the current table size, so that the next
1202
* table data size will be adaquete for DMA
1204
if (next_table_data_size &&
1205
next_table_data_size < SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE)
1207
table_data_size -= (SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE -
1208
next_table_data_size);
1211
return table_data_size;
1215
* sep_build_lli_table - build an lli array for the given table
1216
* @sep: pointer to struct sep_device
1217
* @lli_array_ptr: pointer to lli array
1218
* @lli_table_ptr: pointer to lli table
1219
* @num_processed_entries_ptr: pointer to number of entries
1220
* @num_table_entries_ptr: pointer to number of tables
1221
* @table_data_size: total data size
1223
* Builds ant lli table from the lli_array according to
1224
* the given size of data
1226
static void sep_build_lli_table(struct sep_device *sep,
1227
struct sep_lli_entry *lli_array_ptr,
1228
struct sep_lli_entry *lli_table_ptr,
1229
u32 *num_processed_entries_ptr,
1230
u32 *num_table_entries_ptr,
1231
u32 table_data_size)
1233
/* Current table data size */
1234
u32 curr_table_data_size;
1235
/* Counter of lli array entry */
1238
/* Init current table data size and lli array entry counter */
1239
curr_table_data_size = 0;
1241
*num_table_entries_ptr = 1;
1243
dev_dbg(&sep->pdev->dev, "build lli table table_data_size is %x\n", table_data_size);
1245
/* Fill the table till table size reaches the needed amount */
1246
while (curr_table_data_size < table_data_size) {
1247
/* Update the number of entries in table */
1248
(*num_table_entries_ptr)++;
1250
lli_table_ptr->bus_address =
1251
cpu_to_le32(lli_array_ptr[array_counter].bus_address);
1253
lli_table_ptr->block_size =
1254
cpu_to_le32(lli_array_ptr[array_counter].block_size);
1256
curr_table_data_size += lli_array_ptr[array_counter].block_size;
1258
dev_dbg(&sep->pdev->dev, "lli_table_ptr is %p\n",
1260
dev_dbg(&sep->pdev->dev, "lli_table_ptr->bus_address is %08lx\n",
1261
(unsigned long)lli_table_ptr->bus_address);
1262
dev_dbg(&sep->pdev->dev, "lli_table_ptr->block_size is %x\n",
1263
lli_table_ptr->block_size);
1265
/* Check for overflow of the table data */
1266
if (curr_table_data_size > table_data_size) {
1267
dev_dbg(&sep->pdev->dev,
1268
"curr_table_data_size too large\n");
1270
/* Update the size of block in the table */
1271
lli_table_ptr->block_size -=
1272
cpu_to_le32((curr_table_data_size - table_data_size));
1274
/* Update the physical address in the lli array */
1275
lli_array_ptr[array_counter].bus_address +=
1276
cpu_to_le32(lli_table_ptr->block_size);
1278
/* Update the block size left in the lli array */
1279
lli_array_ptr[array_counter].block_size =
1280
(curr_table_data_size - table_data_size);
1282
/* Advance to the next entry in the lli_array */
1285
dev_dbg(&sep->pdev->dev,
1286
"lli_table_ptr->bus_address is %08lx\n",
1287
(unsigned long)lli_table_ptr->bus_address);
1288
dev_dbg(&sep->pdev->dev,
1289
"lli_table_ptr->block_size is %x\n",
1290
lli_table_ptr->block_size);
1292
/* Move to the next entry in table */
1296
/* Set the info entry to default */
1297
lli_table_ptr->bus_address = 0xffffffff;
1298
lli_table_ptr->block_size = 0;
1300
/* Set the output parameter */
1301
*num_processed_entries_ptr += array_counter;
1306
* sep_shared_area_virt_to_bus - map shared area to bus address
1307
* @sep: pointer to struct sep_device
1308
* @virt_address: virtual address to convert
1310
* This functions returns the physical address inside shared area according
1311
* to the virtual address. It can be either on the externa RAM device
1312
* (ioremapped), or on the system RAM
1313
* This implementation is for the external RAM
1315
static dma_addr_t sep_shared_area_virt_to_bus(struct sep_device *sep,
1318
dev_dbg(&sep->pdev->dev, "sh virt to phys v %p\n", virt_address);
1319
dev_dbg(&sep->pdev->dev, "sh virt to phys p %08lx\n",
1321
sep->shared_bus + (virt_address - sep->shared_addr));
1323
return sep->shared_bus + (size_t)(virt_address - sep->shared_addr);
1327
* sep_shared_area_bus_to_virt - map shared area bus address to kernel
1328
* @sep: pointer to struct sep_device
1329
* @bus_address: bus address to convert
1331
* This functions returns the virtual address inside shared area
1332
* according to the physical address. It can be either on the
1333
* externa RAM device (ioremapped), or on the system RAM
1334
* This implementation is for the external RAM
1336
static void *sep_shared_area_bus_to_virt(struct sep_device *sep,
1337
dma_addr_t bus_address)
1339
dev_dbg(&sep->pdev->dev, "shared bus to virt b=%lx v=%lx\n",
1340
(unsigned long)bus_address, (unsigned long)(sep->shared_addr +
1341
(size_t)(bus_address - sep->shared_bus)));
1343
return sep->shared_addr + (size_t)(bus_address - sep->shared_bus);
1347
* sep_debug_print_lli_tables - dump LLI table
1348
* @sep: pointer to struct sep_device
1349
* @lli_table_ptr: pointer to sep_lli_entry
1350
* @num_table_entries: number of entries
1351
* @table_data_size: total data size
1353
* Walk the the list of the print created tables and print all the data
1355
static void sep_debug_print_lli_tables(struct sep_device *sep,
1356
struct sep_lli_entry *lli_table_ptr,
1357
unsigned long num_table_entries,
1358
unsigned long table_data_size)
1360
unsigned long table_count = 1;
1361
unsigned long entries_count = 0;
1363
dev_dbg(&sep->pdev->dev, "sep_debug_print_lli_tables start\n");
1365
while ((unsigned long) lli_table_ptr->bus_address != 0xffffffff) {
1366
dev_dbg(&sep->pdev->dev,
1367
"lli table %08lx, table_data_size is %lu\n",
1368
table_count, table_data_size);
1369
dev_dbg(&sep->pdev->dev, "num_table_entries is %lu\n",
1372
/* Print entries of the table (without info entry) */
1373
for (entries_count = 0; entries_count < num_table_entries;
1374
entries_count++, lli_table_ptr++) {
1376
dev_dbg(&sep->pdev->dev,
1377
"lli_table_ptr address is %08lx\n",
1378
(unsigned long) lli_table_ptr);
1380
dev_dbg(&sep->pdev->dev,
1381
"phys address is %08lx block size is %x\n",
1382
(unsigned long)lli_table_ptr->bus_address,
1383
lli_table_ptr->block_size);
1385
/* Point to the info entry */
1388
dev_dbg(&sep->pdev->dev,
1389
"phys lli_table_ptr->block_size is %x\n",
1390
lli_table_ptr->block_size);
1392
dev_dbg(&sep->pdev->dev,
1393
"phys lli_table_ptr->physical_address is %08lu\n",
1394
(unsigned long)lli_table_ptr->bus_address);
1397
table_data_size = lli_table_ptr->block_size & 0xffffff;
1398
num_table_entries = (lli_table_ptr->block_size >> 24) & 0xff;
1400
dev_dbg(&sep->pdev->dev,
1401
"phys table_data_size is %lu num_table_entries is"
1402
" %lu bus_address is%lu\n", table_data_size,
1403
num_table_entries, (unsigned long)lli_table_ptr->bus_address);
1405
if ((unsigned long)lli_table_ptr->bus_address != 0xffffffff)
1406
lli_table_ptr = (struct sep_lli_entry *)
1407
sep_shared_bus_to_virt(sep,
1408
(unsigned long)lli_table_ptr->bus_address);
1412
dev_dbg(&sep->pdev->dev, "sep_debug_print_lli_tables end\n");
1417
* sep_prepare_empty_lli_table - create a blank LLI table
1418
* @sep: pointer to struct sep_device
1419
* @lli_table_addr_ptr: pointer to lli table
1420
* @num_entries_ptr: pointer to number of entries
1421
* @table_data_size_ptr: point to table data size
1423
* This function creates empty lli tables when there is no data
1425
static void sep_prepare_empty_lli_table(struct sep_device *sep,
1426
dma_addr_t *lli_table_addr_ptr,
1427
u32 *num_entries_ptr,
1428
u32 *table_data_size_ptr)
1430
struct sep_lli_entry *lli_table_ptr;
1432
/* Find the area for new table */
1434
(struct sep_lli_entry *)(sep->shared_addr +
1435
SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES +
1436
sep->num_lli_tables_created * sizeof(struct sep_lli_entry) *
1437
SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP);
1439
lli_table_ptr->bus_address = 0;
1440
lli_table_ptr->block_size = 0;
1443
lli_table_ptr->bus_address = 0xFFFFFFFF;
1444
lli_table_ptr->block_size = 0;
1446
/* Set the output parameter value */
1447
*lli_table_addr_ptr = sep->shared_bus +
1448
SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES +
1449
sep->num_lli_tables_created *
1450
sizeof(struct sep_lli_entry) *
1451
SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP;
1453
/* Set the num of entries and table data size for empty table */
1454
*num_entries_ptr = 2;
1455
*table_data_size_ptr = 0;
1457
/* Update the number of created tables */
1458
sep->num_lli_tables_created++;
1462
* sep_prepare_input_dma_table - prepare input DMA mappings
1463
* @sep: pointer to struct sep_device
1468
* @table_data_size_ptr:
1469
* @is_kva: set for kernel data (kernel cryptio call)
1471
* This function prepares only input DMA table for synhronic symmetric
1473
* Note that all bus addresses that are passed to the SEP
1474
* are in 32 bit format; the SEP is a 32 bit device
1476
static int sep_prepare_input_dma_table(struct sep_device *sep,
1477
unsigned long app_virt_addr,
1480
dma_addr_t *lli_table_ptr,
1481
u32 *num_entries_ptr,
1482
u32 *table_data_size_ptr,
1486
/* Pointer to the info entry of the table - the last entry */
1487
struct sep_lli_entry *info_entry_ptr;
1488
/* Array of pointers to page */
1489
struct sep_lli_entry *lli_array_ptr;
1490
/* Points to the first entry to be processed in the lli_in_array */
1491
u32 current_entry = 0;
1492
/* Num entries in the virtual buffer */
1493
u32 sep_lli_entries = 0;
1494
/* Lli table pointer */
1495
struct sep_lli_entry *in_lli_table_ptr;
1496
/* The total data in one table */
1497
u32 table_data_size = 0;
1498
/* Flag for last table */
1499
u32 last_table_flag = 0;
1500
/* Number of entries in lli table */
1501
u32 num_entries_in_table = 0;
1502
/* Next table address */
1503
void *lli_table_alloc_addr = 0;
1505
dev_dbg(&sep->pdev->dev, "prepare intput dma table data_size is %x\n", data_size);
1506
dev_dbg(&sep->pdev->dev, "block_size is %x\n", block_size);
1508
/* Initialize the pages pointers */
1509
sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = NULL;
1510
sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages = 0;
1512
/* Set the kernel address for first table to be allocated */
1513
lli_table_alloc_addr = (void *)(sep->shared_addr +
1514
SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES +
1515
sep->num_lli_tables_created * sizeof(struct sep_lli_entry) *
1516
SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP);
1518
if (data_size == 0) {
1519
/* Special case - create meptu table - 2 entries, zero data */
1520
sep_prepare_empty_lli_table(sep, lli_table_ptr,
1521
num_entries_ptr, table_data_size_ptr);
1522
goto update_dcb_counter;
1525
/* Check if the pages are in Kernel Virtual Address layout */
1527
/* Lock the pages in the kernel */
1528
error = sep_lock_kernel_pages(sep, app_virt_addr,
1529
data_size, &lli_array_ptr, SEP_DRIVER_IN_FLAG);
1532
* Lock the pages of the user buffer
1533
* and translate them to pages
1535
error = sep_lock_user_pages(sep, app_virt_addr,
1536
data_size, &lli_array_ptr, SEP_DRIVER_IN_FLAG);
1541
dev_dbg(&sep->pdev->dev, "output sep_in_num_pages is %x\n",
1542
sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages);
1545
info_entry_ptr = NULL;
1547
sep_lli_entries = sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages;
1549
/* Loop till all the entries in in array are not processed */
1550
while (current_entry < sep_lli_entries) {
1552
/* Set the new input and output tables */
1554
(struct sep_lli_entry *)lli_table_alloc_addr;
1556
lli_table_alloc_addr += sizeof(struct sep_lli_entry) *
1557
SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP;
1559
if (lli_table_alloc_addr >
1560
((void *)sep->shared_addr +
1561
SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES +
1562
SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES)) {
1565
goto end_function_error;
1569
/* Update the number of created tables */
1570
sep->num_lli_tables_created++;
1572
/* Calculate the maximum size of data for input table */
1573
table_data_size = sep_calculate_lli_table_max_size(sep,
1574
&lli_array_ptr[current_entry],
1575
(sep_lli_entries - current_entry),
1579
* If this is not the last table -
1580
* then align it to the block size
1582
if (!last_table_flag)
1584
(table_data_size / block_size) * block_size;
1586
dev_dbg(&sep->pdev->dev, "output table_data_size is %x\n",
1589
/* Construct input lli table */
1590
sep_build_lli_table(sep, &lli_array_ptr[current_entry],
1592
¤t_entry, &num_entries_in_table, table_data_size);
1594
if (info_entry_ptr == NULL) {
1596
/* Set the output parameters to physical addresses */
1597
*lli_table_ptr = sep_shared_area_virt_to_bus(sep,
1599
*num_entries_ptr = num_entries_in_table;
1600
*table_data_size_ptr = table_data_size;
1602
dev_dbg(&sep->pdev->dev,
1603
"output lli_table_in_ptr is %08lx\n",
1604
(unsigned long)*lli_table_ptr);
1607
/* Update the info entry of the previous in table */
1608
info_entry_ptr->bus_address =
1609
sep_shared_area_virt_to_bus(sep,
1611
info_entry_ptr->block_size =
1612
((num_entries_in_table) << 24) |
1615
/* Save the pointer to the info entry of the current tables */
1616
info_entry_ptr = in_lli_table_ptr + num_entries_in_table - 1;
1618
/* Print input tables */
1619
sep_debug_print_lli_tables(sep, (struct sep_lli_entry *)
1620
sep_shared_area_bus_to_virt(sep, *lli_table_ptr),
1621
*num_entries_ptr, *table_data_size_ptr);
1622
/* The array of the pages */
1623
kfree(lli_array_ptr);
1626
/* Update DCB counter */
1627
sep->nr_dcb_creat++;
1631
/* Free all the allocated resources */
1632
kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_map_array);
1633
kfree(lli_array_ptr);
1634
kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_page_array);
1641
* sep_construct_dma_tables_from_lli - prepare AES/DES mappings
1642
* @sep: pointer to struct sep_device
1644
* @sep_in_lli_entries:
1646
* @sep_out_lli_entries
1649
* @lli_table_out_ptr
1650
* @in_num_entries_ptr
1651
* @out_num_entries_ptr
1652
* @table_data_size_ptr
1654
* This function creates the input and output DMA tables for
1655
* symmetric operations (AES/DES) according to the block
1656
* size from LLI arays
1657
* Note that all bus addresses that are passed to the SEP
1658
* are in 32 bit format; the SEP is a 32 bit device
1660
static int sep_construct_dma_tables_from_lli(
1661
struct sep_device *sep,
1662
struct sep_lli_entry *lli_in_array,
1663
u32 sep_in_lli_entries,
1664
struct sep_lli_entry *lli_out_array,
1665
u32 sep_out_lli_entries,
1667
dma_addr_t *lli_table_in_ptr,
1668
dma_addr_t *lli_table_out_ptr,
1669
u32 *in_num_entries_ptr,
1670
u32 *out_num_entries_ptr,
1671
u32 *table_data_size_ptr)
1673
/* Points to the area where next lli table can be allocated */
1674
void *lli_table_alloc_addr = 0;
1675
/* Input lli table */
1676
struct sep_lli_entry *in_lli_table_ptr = NULL;
1677
/* Output lli table */
1678
struct sep_lli_entry *out_lli_table_ptr = NULL;
1679
/* Pointer to the info entry of the table - the last entry */
1680
struct sep_lli_entry *info_in_entry_ptr = NULL;
1681
/* Pointer to the info entry of the table - the last entry */
1682
struct sep_lli_entry *info_out_entry_ptr = NULL;
1683
/* Points to the first entry to be processed in the lli_in_array */
1684
u32 current_in_entry = 0;
1685
/* Points to the first entry to be processed in the lli_out_array */
1686
u32 current_out_entry = 0;
1687
/* Max size of the input table */
1688
u32 in_table_data_size = 0;
1689
/* Max size of the output table */
1690
u32 out_table_data_size = 0;
1691
/* Flag te signifies if this is the last tables build */
1692
u32 last_table_flag = 0;
1693
/* The data size that should be in table */
1694
u32 table_data_size = 0;
1695
/* Number of etnries in the input table */
1696
u32 num_entries_in_table = 0;
1697
/* Number of etnries in the output table */
1698
u32 num_entries_out_table = 0;
1700
/* Initiate to point after the message area */
1701
lli_table_alloc_addr = (void *)(sep->shared_addr +
1702
SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES +
1703
(sep->num_lli_tables_created *
1704
(sizeof(struct sep_lli_entry) *
1705
SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP)));
1707
/* Loop till all the entries in in array are not processed */
1708
while (current_in_entry < sep_in_lli_entries) {
1709
/* Set the new input and output tables */
1711
(struct sep_lli_entry *)lli_table_alloc_addr;
1713
lli_table_alloc_addr += sizeof(struct sep_lli_entry) *
1714
SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP;
1716
/* Set the first output tables */
1718
(struct sep_lli_entry *)lli_table_alloc_addr;
1720
/* Check if the DMA table area limit was overrun */
1721
if ((lli_table_alloc_addr + sizeof(struct sep_lli_entry) *
1722
SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP) >
1723
((void *)sep->shared_addr +
1724
SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES +
1725
SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES)) {
1727
dev_warn(&sep->pdev->dev, "dma table limit overrun\n");
1731
/* Update the number of the lli tables created */
1732
sep->num_lli_tables_created += 2;
1734
lli_table_alloc_addr += sizeof(struct sep_lli_entry) *
1735
SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP;
1737
/* Calculate the maximum size of data for input table */
1738
in_table_data_size =
1739
sep_calculate_lli_table_max_size(sep,
1740
&lli_in_array[current_in_entry],
1741
(sep_in_lli_entries - current_in_entry),
1744
/* Calculate the maximum size of data for output table */
1745
out_table_data_size =
1746
sep_calculate_lli_table_max_size(sep,
1747
&lli_out_array[current_out_entry],
1748
(sep_out_lli_entries - current_out_entry),
1751
dev_dbg(&sep->pdev->dev,
1752
"construct tables from lli in_table_data_size is %x\n",
1753
in_table_data_size);
1755
dev_dbg(&sep->pdev->dev,
1756
"construct tables from lli out_table_data_size is %x\n",
1757
out_table_data_size);
1759
table_data_size = in_table_data_size;
1761
if (!last_table_flag) {
1763
* If this is not the last table,
1764
* then must check where the data is smallest
1765
* and then align it to the block size
1767
if (table_data_size > out_table_data_size)
1768
table_data_size = out_table_data_size;
1771
* Now calculate the table size so that
1772
* it will be module block size
1774
table_data_size = (table_data_size / block_size) *
1778
/* Construct input lli table */
1779
sep_build_lli_table(sep, &lli_in_array[current_in_entry],
1782
&num_entries_in_table,
1785
/* Construct output lli table */
1786
sep_build_lli_table(sep, &lli_out_array[current_out_entry],
1789
&num_entries_out_table,
1792
/* If info entry is null - this is the first table built */
1793
if (info_in_entry_ptr == NULL) {
1794
/* Set the output parameters to physical addresses */
1796
sep_shared_area_virt_to_bus(sep, in_lli_table_ptr);
1798
*in_num_entries_ptr = num_entries_in_table;
1800
*lli_table_out_ptr =
1801
sep_shared_area_virt_to_bus(sep,
1804
*out_num_entries_ptr = num_entries_out_table;
1805
*table_data_size_ptr = table_data_size;
1807
dev_dbg(&sep->pdev->dev,
1808
"output lli_table_in_ptr is %08lx\n",
1809
(unsigned long)*lli_table_in_ptr);
1810
dev_dbg(&sep->pdev->dev,
1811
"output lli_table_out_ptr is %08lx\n",
1812
(unsigned long)*lli_table_out_ptr);
1814
/* Update the info entry of the previous in table */
1815
info_in_entry_ptr->bus_address =
1816
sep_shared_area_virt_to_bus(sep,
1819
info_in_entry_ptr->block_size =
1820
((num_entries_in_table) << 24) |
1823
/* Update the info entry of the previous in table */
1824
info_out_entry_ptr->bus_address =
1825
sep_shared_area_virt_to_bus(sep,
1828
info_out_entry_ptr->block_size =
1829
((num_entries_out_table) << 24) |
1832
dev_dbg(&sep->pdev->dev,
1833
"output lli_table_in_ptr:%08lx %08x\n",
1834
(unsigned long)info_in_entry_ptr->bus_address,
1835
info_in_entry_ptr->block_size);
1837
dev_dbg(&sep->pdev->dev,
1838
"output lli_table_out_ptr:%08lx %08x\n",
1839
(unsigned long)info_out_entry_ptr->bus_address,
1840
info_out_entry_ptr->block_size);
1843
/* Save the pointer to the info entry of the current tables */
1844
info_in_entry_ptr = in_lli_table_ptr +
1845
num_entries_in_table - 1;
1846
info_out_entry_ptr = out_lli_table_ptr +
1847
num_entries_out_table - 1;
1849
dev_dbg(&sep->pdev->dev,
1850
"output num_entries_out_table is %x\n",
1851
(u32)num_entries_out_table);
1852
dev_dbg(&sep->pdev->dev,
1853
"output info_in_entry_ptr is %lx\n",
1854
(unsigned long)info_in_entry_ptr);
1855
dev_dbg(&sep->pdev->dev,
1856
"output info_out_entry_ptr is %lx\n",
1857
(unsigned long)info_out_entry_ptr);
1860
/* Print input tables */
1861
sep_debug_print_lli_tables(sep,
1862
(struct sep_lli_entry *)
1863
sep_shared_area_bus_to_virt(sep, *lli_table_in_ptr),
1864
*in_num_entries_ptr,
1865
*table_data_size_ptr);
1867
/* Print output tables */
1868
sep_debug_print_lli_tables(sep,
1869
(struct sep_lli_entry *)
1870
sep_shared_area_bus_to_virt(sep, *lli_table_out_ptr),
1871
*out_num_entries_ptr,
1872
*table_data_size_ptr);
1878
* sep_prepare_input_output_dma_table - prepare DMA I/O table
1879
* @app_virt_in_addr:
1880
* @app_virt_out_addr:
1883
* @lli_table_in_ptr:
1884
* @lli_table_out_ptr:
1885
* @in_num_entries_ptr:
1886
* @out_num_entries_ptr:
1887
* @table_data_size_ptr:
1888
* @is_kva: set for kernel data; used only for kernel crypto module
1890
* This function builds input and output DMA tables for synhronic
1891
* symmetric operations (AES, DES, HASH). It also checks that each table
1892
* is of the modular block size
1893
* Note that all bus addresses that are passed to the SEP
1894
* are in 32 bit format; the SEP is a 32 bit device
1896
static int sep_prepare_input_output_dma_table(struct sep_device *sep,
1897
unsigned long app_virt_in_addr,
1898
unsigned long app_virt_out_addr,
1901
dma_addr_t *lli_table_in_ptr,
1902
dma_addr_t *lli_table_out_ptr,
1903
u32 *in_num_entries_ptr,
1904
u32 *out_num_entries_ptr,
1905
u32 *table_data_size_ptr,
1910
/* Array of pointers of page */
1911
struct sep_lli_entry *lli_in_array;
1912
/* Array of pointers of page */
1913
struct sep_lli_entry *lli_out_array;
1915
if (data_size == 0) {
1916
/* Prepare empty table for input and output */
1917
sep_prepare_empty_lli_table(sep, lli_table_in_ptr,
1918
in_num_entries_ptr, table_data_size_ptr);
1920
sep_prepare_empty_lli_table(sep, lli_table_out_ptr,
1921
out_num_entries_ptr, table_data_size_ptr);
1923
goto update_dcb_counter;
1926
/* Initialize the pages pointers */
1927
sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = NULL;
1928
sep->dma_res_arr[sep->nr_dcb_creat].out_page_array = NULL;
1930
/* Lock the pages of the buffer and translate them to pages */
1931
if (is_kva == true) {
1932
error = sep_lock_kernel_pages(sep, app_virt_in_addr,
1933
data_size, &lli_in_array, SEP_DRIVER_IN_FLAG);
1936
dev_warn(&sep->pdev->dev,
1937
"lock kernel for in failed\n");
1941
error = sep_lock_kernel_pages(sep, app_virt_out_addr,
1942
data_size, &lli_out_array, SEP_DRIVER_OUT_FLAG);
1945
dev_warn(&sep->pdev->dev,
1946
"lock kernel for out failed\n");
1952
error = sep_lock_user_pages(sep, app_virt_in_addr,
1953
data_size, &lli_in_array, SEP_DRIVER_IN_FLAG);
1955
dev_warn(&sep->pdev->dev,
1956
"sep_lock_user_pages for input virtual buffer failed\n");
1960
error = sep_lock_user_pages(sep, app_virt_out_addr,
1961
data_size, &lli_out_array, SEP_DRIVER_OUT_FLAG);
1964
dev_warn(&sep->pdev->dev,
1965
"sep_lock_user_pages for output virtual buffer failed\n");
1966
goto end_function_free_lli_in;
1970
dev_dbg(&sep->pdev->dev, "prep input output dma table sep_in_num_pages is %x\n",
1971
sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages);
1972
dev_dbg(&sep->pdev->dev, "sep_out_num_pages is %x\n",
1973
sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages);
1974
dev_dbg(&sep->pdev->dev, "SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP is %x\n",
1975
SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP);
1977
/* Call the function that creates table from the lli arrays */
1978
error = sep_construct_dma_tables_from_lli(sep, lli_in_array,
1979
sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages,
1981
sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages,
1982
block_size, lli_table_in_ptr, lli_table_out_ptr,
1983
in_num_entries_ptr, out_num_entries_ptr, table_data_size_ptr);
1986
dev_warn(&sep->pdev->dev,
1987
"sep_construct_dma_tables_from_lli failed\n");
1988
goto end_function_with_error;
1991
kfree(lli_out_array);
1992
kfree(lli_in_array);
1995
/* Update DCB counter */
1996
sep->nr_dcb_creat++;
2000
end_function_with_error:
2001
kfree(sep->dma_res_arr[sep->nr_dcb_creat].out_map_array);
2002
kfree(sep->dma_res_arr[sep->nr_dcb_creat].out_page_array);
2003
kfree(lli_out_array);
2006
end_function_free_lli_in:
2007
kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_map_array);
2008
kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_page_array);
2009
kfree(lli_in_array);
2018
* sep_prepare_input_output_dma_table_in_dcb - prepare control blocks
2019
* @app_in_address: unsigned long; for data buffer in (user space)
2020
* @app_out_address: unsigned long; for data buffer out (user space)
2021
* @data_in_size: u32; for size of data
2022
* @block_size: u32; for block size
2023
* @tail_block_size: u32; for size of tail block
2024
* @isapplet: bool; to indicate external app
2025
* @is_kva: bool; kernel buffer; only used for kernel crypto module
2027
* This function prepares the linked DMA tables and puts the
2028
* address for the linked list of tables inta a DCB (data control
2029
* block) the address of which is known by the SEP hardware
2030
* Note that all bus addresses that are passed to the SEP
2031
* are in 32 bit format; the SEP is a 32 bit device
2033
static int sep_prepare_input_output_dma_table_in_dcb(struct sep_device *sep,
2034
unsigned long app_in_address,
2035
unsigned long app_out_address,
2038
u32 tail_block_size,
2045
/* Address of the created DCB table */
2046
struct sep_dcblock *dcb_table_ptr = NULL;
2047
/* The physical address of the first input DMA table */
2048
dma_addr_t in_first_mlli_address = 0;
2049
/* Number of entries in the first input DMA table */
2050
u32 in_first_num_entries = 0;
2051
/* The physical address of the first output DMA table */
2052
dma_addr_t out_first_mlli_address = 0;
2053
/* Number of entries in the first output DMA table */
2054
u32 out_first_num_entries = 0;
2055
/* Data in the first input/output table */
2056
u32 first_data_size = 0;
2058
if (sep->nr_dcb_creat == SEP_MAX_NUM_SYNC_DMA_OPS) {
2059
/* No more DCBs to allocate */
2060
dev_warn(&sep->pdev->dev, "no more DCBs available\n");
2065
/* Allocate new DCB */
2066
dcb_table_ptr = (struct sep_dcblock *)(sep->shared_addr +
2067
SEP_DRIVER_SYSTEM_DCB_MEMORY_OFFSET_IN_BYTES +
2068
(sep->nr_dcb_creat * sizeof(struct sep_dcblock)));
2070
/* Set the default values in the DCB */
2071
dcb_table_ptr->input_mlli_address = 0;
2072
dcb_table_ptr->input_mlli_num_entries = 0;
2073
dcb_table_ptr->input_mlli_data_size = 0;
2074
dcb_table_ptr->output_mlli_address = 0;
2075
dcb_table_ptr->output_mlli_num_entries = 0;
2076
dcb_table_ptr->output_mlli_data_size = 0;
2077
dcb_table_ptr->tail_data_size = 0;
2078
dcb_table_ptr->out_vr_tail_pt = 0;
2080
if (isapplet == true) {
2082
/* Check if there is enough data for DMA operation */
2083
if (data_in_size < SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE) {
2084
if (is_kva == true) {
2085
memcpy(dcb_table_ptr->tail_data,
2086
(void *)app_in_address, data_in_size);
2088
if (copy_from_user(dcb_table_ptr->tail_data,
2089
(void __user *)app_in_address,
2096
dcb_table_ptr->tail_data_size = data_in_size;
2098
/* Set the output user-space address for mem2mem op */
2099
if (app_out_address)
2100
dcb_table_ptr->out_vr_tail_pt =
2101
(aligned_u64)app_out_address;
2104
* Update both data length parameters in order to avoid
2105
* second data copy and allow building of empty mlli
2112
if (!app_out_address) {
2113
tail_size = data_in_size % block_size;
2115
if (tail_block_size == block_size)
2116
tail_size = block_size;
2123
if (tail_size > sizeof(dcb_table_ptr->tail_data))
2125
if (is_kva == true) {
2126
memcpy(dcb_table_ptr->tail_data,
2127
(void *)(app_in_address + data_in_size -
2128
tail_size), tail_size);
2130
/* We have tail data - copy it to DCB */
2131
if (copy_from_user(dcb_table_ptr->tail_data,
2132
(void *)(app_in_address +
2133
data_in_size - tail_size), tail_size)) {
2138
if (app_out_address)
2140
* Calculate the output address
2141
* according to tail data size
2143
dcb_table_ptr->out_vr_tail_pt =
2144
(aligned_u64)app_out_address + data_in_size
2147
/* Save the real tail data size */
2148
dcb_table_ptr->tail_data_size = tail_size;
2150
* Update the data size without the tail
2151
* data size AKA data for the dma
2153
data_in_size = (data_in_size - tail_size);
2156
/* Check if we need to build only input table or input/output */
2157
if (app_out_address) {
2158
/* Prepare input/output tables */
2159
error = sep_prepare_input_output_dma_table(sep,
2164
&in_first_mlli_address,
2165
&out_first_mlli_address,
2166
&in_first_num_entries,
2167
&out_first_num_entries,
2171
/* Prepare input tables */
2172
error = sep_prepare_input_dma_table(sep,
2176
&in_first_mlli_address,
2177
&in_first_num_entries,
2183
dev_warn(&sep->pdev->dev, "prepare DMA table call failed from prepare DCB call\n");
2187
/* Set the DCB values */
2188
dcb_table_ptr->input_mlli_address = in_first_mlli_address;
2189
dcb_table_ptr->input_mlli_num_entries = in_first_num_entries;
2190
dcb_table_ptr->input_mlli_data_size = first_data_size;
2191
dcb_table_ptr->output_mlli_address = out_first_mlli_address;
2192
dcb_table_ptr->output_mlli_num_entries = out_first_num_entries;
2193
dcb_table_ptr->output_mlli_data_size = first_data_size;
2201
* sep_free_dma_tables_and_dcb - free DMA tables and DCBs
2202
* @sep: pointer to struct sep_device
2203
* @isapplet: indicates external application (used for kernel access)
2204
* @is_kva: indicates kernel addresses (only used for kernel crypto)
2206
* This function frees the DMA tables and DCB
2208
static int sep_free_dma_tables_and_dcb(struct sep_device *sep, bool isapplet,
2214
struct sep_dcblock *dcb_table_ptr;
2215
unsigned long pt_hold;
2218
if (isapplet == true) {
2219
/* Set pointer to first DCB table */
2220
dcb_table_ptr = (struct sep_dcblock *)
2222
SEP_DRIVER_SYSTEM_DCB_MEMORY_OFFSET_IN_BYTES);
2224
/* Go over each DCB and see if tail pointer must be updated */
2225
for (i = 0; i < sep->nr_dcb_creat; i++, dcb_table_ptr++) {
2226
if (dcb_table_ptr->out_vr_tail_pt) {
2227
pt_hold = (unsigned long)dcb_table_ptr->out_vr_tail_pt;
2228
tail_pt = (void *)pt_hold;
2229
if (is_kva == true) {
2231
dcb_table_ptr->tail_data,
2232
dcb_table_ptr->tail_data_size);
2234
error_temp = copy_to_user(
2236
dcb_table_ptr->tail_data,
2237
dcb_table_ptr->tail_data_size);
2240
/* Release the DMA resource */
2247
/* Free the output pages, if any */
2248
sep_free_dma_table_data_handler(sep);
2254
* sep_get_static_pool_addr_handler - get static pool address
2255
* @sep: pointer to struct sep_device
2257
* This function sets the bus and virtual addresses of the static pool
2259
static int sep_get_static_pool_addr_handler(struct sep_device *sep)
2261
u32 *static_pool_addr = NULL;
2263
static_pool_addr = (u32 *)(sep->shared_addr +
2264
SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES);
2266
static_pool_addr[0] = SEP_STATIC_POOL_VAL_TOKEN;
2267
static_pool_addr[1] = (u32)sep->shared_bus +
2268
SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES;
2270
dev_dbg(&sep->pdev->dev, "static pool segment: physical %x\n",
2271
(u32)static_pool_addr[1]);
2277
* sep_end_transaction_handler - end transaction
2278
* @sep: pointer to struct sep_device
2280
* This API handles the end transaction request
2282
static int sep_end_transaction_handler(struct sep_device *sep)
2284
/* Clear the data pool pointers Token */
2285
memset((void *)(sep->shared_addr +
2286
SEP_DRIVER_DATA_POOL_ALLOCATION_OFFSET_IN_BYTES),
2287
0, sep->num_of_data_allocations*2*sizeof(u32));
2289
/* Check that all the DMA resources were freed */
2290
sep_free_dma_table_data_handler(sep);
2292
clear_bit(SEP_MMAP_LOCK_BIT, &sep->in_use_flags);
2295
* We are now through with the transaction. Let's
2296
* allow other processes who have the device open
2297
* to perform transactions
2299
mutex_lock(&sep->sep_mutex);
2300
sep->pid_doing_transaction = 0;
2301
mutex_unlock(&sep->sep_mutex);
2302
/* Raise event for stuck contextes */
2303
wake_up(&sep->event);
2309
* sep_prepare_dcb_handler - prepare a control block
2310
* @sep: pointer to struct sep_device
2311
* @arg: pointer to user parameters
2313
* This function will retrieve the RAR buffer physical addresses, type
2314
* & size corresponding to the RAR handles provided in the buffers vector.
2316
static int sep_prepare_dcb_handler(struct sep_device *sep, unsigned long arg)
2319
/* Command arguments */
2320
struct build_dcb_struct command_args;
2322
/* Get the command arguments */
2323
if (copy_from_user(&command_args, (void __user *)arg,
2324
sizeof(struct build_dcb_struct))) {
2329
dev_dbg(&sep->pdev->dev, "prep dcb handler app_in_address is %08llx\n",
2330
command_args.app_in_address);
2331
dev_dbg(&sep->pdev->dev, "app_out_address is %08llx\n",
2332
command_args.app_out_address);
2333
dev_dbg(&sep->pdev->dev, "data_size is %x\n",
2334
command_args.data_in_size);
2335
dev_dbg(&sep->pdev->dev, "block_size is %x\n",
2336
command_args.block_size);
2337
dev_dbg(&sep->pdev->dev, "tail block_size is %x\n",
2338
command_args.tail_block_size);
2340
error = sep_prepare_input_output_dma_table_in_dcb(sep,
2341
(unsigned long)command_args.app_in_address,
2342
(unsigned long)command_args.app_out_address,
2343
command_args.data_in_size, command_args.block_size,
2344
command_args.tail_block_size, true, false);
2352
* sep_free_dcb_handler - free control block resources
2353
* @sep: pointer to struct sep_device
2355
* This function frees the DCB resources and updates the needed
2356
* user-space buffers.
2358
static int sep_free_dcb_handler(struct sep_device *sep)
2360
return sep_free_dma_tables_and_dcb(sep, false, false);
2364
* sep_rar_prepare_output_msg_handler - prepare an output message
2365
* @sep: pointer to struct sep_device
2366
* @arg: pointer to user parameters
2368
* This function will retrieve the RAR buffer physical addresses, type
2369
* & size corresponding to the RAR handles provided in the buffers vector.
2371
static int sep_rar_prepare_output_msg_handler(struct sep_device *sep,
2376
struct rar_hndl_to_bus_struct command_args;
2378
dma_addr_t rar_bus = 0;
2379
/* Holds the RAR address in the system memory offset */
2383
if (copy_from_user(&command_args, (void __user *)arg,
2384
sizeof(command_args))) {
2389
/* Call to translation function only if user handle is not NULL */
2390
if (command_args.rar_handle)
2392
dev_dbg(&sep->pdev->dev, "rar msg; rar_addr_bus = %x\n", (u32)rar_bus);
2394
/* Set value in the SYSTEM MEMORY offset */
2395
rar_addr = (u32 *)(sep->shared_addr +
2396
SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES);
2398
/* Copy the physical address to the System Area for the SEP */
2399
rar_addr[0] = SEP_RAR_VAL_TOKEN;
2400
rar_addr[1] = rar_bus;
2407
* sep_ioctl - ioctl api
2408
* @filp: pointer to struct file
2410
* @arg: pointer to argument structure
2412
* Implement the ioctl methods available on the SEP device.
2414
static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
2417
struct sep_device *sep = filp->private_data;
2419
/* Make sure we own this device */
2420
mutex_lock(&sep->sep_mutex);
2421
if ((current->pid != sep->pid_doing_transaction) &&
2422
(sep->pid_doing_transaction != 0)) {
2423
dev_dbg(&sep->pdev->dev, "ioctl pid is not owner\n");
2426
mutex_unlock(&sep->sep_mutex);
2431
if (_IOC_TYPE(cmd) != SEP_IOC_MAGIC_NUMBER)
2434
/* Lock to prevent the daemon to interfere with operation */
2435
mutex_lock(&sep->ioctl_mutex);
2438
case SEP_IOCSENDSEPCOMMAND:
2439
/* Send command to SEP */
2440
error = sep_send_command_handler(sep);
2442
case SEP_IOCALLOCDATAPOLL:
2443
/* Allocate data pool */
2444
error = sep_allocate_data_pool_memory_handler(sep, arg);
2446
case SEP_IOCGETSTATICPOOLADDR:
2447
/* Inform the SEP the bus address of the static pool */
2448
error = sep_get_static_pool_addr_handler(sep);
2450
case SEP_IOCENDTRANSACTION:
2451
error = sep_end_transaction_handler(sep);
2453
case SEP_IOCRARPREPAREMESSAGE:
2454
error = sep_rar_prepare_output_msg_handler(sep, arg);
2456
case SEP_IOCPREPAREDCB:
2457
error = sep_prepare_dcb_handler(sep, arg);
2459
case SEP_IOCFREEDCB:
2460
error = sep_free_dcb_handler(sep);
2467
mutex_unlock(&sep->ioctl_mutex);
2472
* sep_singleton_ioctl - ioctl api for singleton interface
2473
* @filp: pointer to struct file
2475
* @arg: pointer to argument structure
2477
* Implement the additional ioctls for the singleton device
2479
static long sep_singleton_ioctl(struct file *filp, u32 cmd, unsigned long arg)
2482
struct sep_device *sep = filp->private_data;
2484
/* Check that the command is for the SEP device */
2485
if (_IOC_TYPE(cmd) != SEP_IOC_MAGIC_NUMBER)
2488
/* Make sure we own this device */
2489
mutex_lock(&sep->sep_mutex);
2490
if ((current->pid != sep->pid_doing_transaction) &&
2491
(sep->pid_doing_transaction != 0)) {
2492
dev_dbg(&sep->pdev->dev, "singleton ioctl pid is not owner\n");
2493
mutex_unlock(&sep->sep_mutex);
2497
mutex_unlock(&sep->sep_mutex);
2500
case SEP_IOCTLSETCALLERID:
2501
mutex_lock(&sep->ioctl_mutex);
2502
error = sep_set_caller_id_handler(sep, arg);
2503
mutex_unlock(&sep->ioctl_mutex);
2506
error = sep_ioctl(filp, cmd, arg);
2513
* sep_request_daemon_ioctl - ioctl for daemon
2514
* @filp: pointer to struct file
2516
* @arg: pointer to argument structure
2518
* Called by the request daemon to perform ioctls on the daemon device
2520
static long sep_request_daemon_ioctl(struct file *filp, u32 cmd,
2525
struct sep_device *sep = filp->private_data;
2527
/* Check that the command is for SEP device */
2528
if (_IOC_TYPE(cmd) != SEP_IOC_MAGIC_NUMBER)
2531
/* Only one process can access ioctl at any given time */
2532
mutex_lock(&sep->ioctl_mutex);
2535
case SEP_IOCSENDSEPRPLYCOMMAND:
2536
/* Send reply command to SEP */
2537
error = sep_req_daemon_send_reply_command_handler(sep);
2539
case SEP_IOCENDTRANSACTION:
2541
* End req daemon transaction, do nothing
2542
* will be removed upon update in middleware
2550
mutex_unlock(&sep->ioctl_mutex);
2555
* sep_inthandler - interrupt handler
2557
* @dev_id: device id
2559
static irqreturn_t sep_inthandler(int irq, void *dev_id)
2561
irqreturn_t int_error = IRQ_HANDLED;
2562
unsigned long lck_flags;
2563
u32 reg_val, reg_val2 = 0;
2564
struct sep_device *sep = dev_id;
2566
/* Read the IRR register to check if this is SEP interrupt */
2567
reg_val = sep_read_reg(sep, HW_HOST_IRR_REG_ADDR);
2569
if (reg_val & (0x1 << 13)) {
2570
/* Lock and update the counter of reply messages */
2571
spin_lock_irqsave(&sep->snd_rply_lck, lck_flags);
2573
spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags);
2575
dev_dbg(&sep->pdev->dev, "sep int: send_ct %lx reply_ct %lx\n",
2576
sep->send_ct, sep->reply_ct);
2578
/* Is this printf or daemon request? */
2579
reg_val2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
2580
dev_dbg(&sep->pdev->dev,
2581
"SEP Interrupt - reg2 is %08x\n", reg_val2);
2583
if ((reg_val2 >> 30) & 0x1) {
2584
dev_dbg(&sep->pdev->dev, "int: printf request\n");
2585
wake_up(&sep->event_request_daemon);
2586
} else if (reg_val2 >> 31) {
2587
dev_dbg(&sep->pdev->dev, "int: daemon request\n");
2588
wake_up(&sep->event_request_daemon);
2590
dev_dbg(&sep->pdev->dev, "int: SEP reply\n");
2591
wake_up(&sep->event);
2594
dev_dbg(&sep->pdev->dev, "int: not SEP interrupt\n");
2595
int_error = IRQ_NONE;
2597
if (int_error == IRQ_HANDLED)
2598
sep_write_reg(sep, HW_HOST_ICR_REG_ADDR, reg_val);
2604
* sep_reconfig_shared_area - reconfigure shared area
2605
* @sep: pointer to struct sep_device
2607
* Reconfig the shared area between HOST and SEP - needed in case
2608
* the DX_CC_Init function was called before OS loading.
2610
static int sep_reconfig_shared_area(struct sep_device *sep)
2614
/* use to limit waiting for SEP */
2615
unsigned long end_time;
2617
/* Send the new SHARED MESSAGE AREA to the SEP */
2618
dev_dbg(&sep->pdev->dev, "reconfig shared; sending %08llx to sep\n",
2619
(unsigned long long)sep->shared_bus);
2621
sep_write_reg(sep, HW_HOST_HOST_SEP_GPR1_REG_ADDR, sep->shared_bus);
2623
/* Poll for SEP response */
2624
ret_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR);
2626
end_time = jiffies + (WAIT_TIME * HZ);
2628
while ((time_before(jiffies, end_time)) && (ret_val != 0xffffffff) &&
2629
(ret_val != sep->shared_bus))
2630
ret_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR);
2632
/* Check the return value (register) */
2633
if (ret_val != sep->shared_bus) {
2634
dev_warn(&sep->pdev->dev, "could not reconfig shared area\n");
2635
dev_warn(&sep->pdev->dev, "result was %x\n", ret_val);
2640
dev_dbg(&sep->pdev->dev, "reconfig shared area end\n");
2644
/* File operation for singleton SEP operations */
2645
static const struct file_operations singleton_file_operations = {
2646
.owner = THIS_MODULE,
2647
.unlocked_ioctl = sep_singleton_ioctl,
2649
.open = sep_singleton_open,
2650
.release = sep_singleton_release,
2654
/* File operation for daemon operations */
2655
static const struct file_operations daemon_file_operations = {
2656
.owner = THIS_MODULE,
2657
.unlocked_ioctl = sep_request_daemon_ioctl,
2658
.poll = sep_request_daemon_poll,
2659
.open = sep_request_daemon_open,
2660
.release = sep_request_daemon_release,
2661
.mmap = sep_request_daemon_mmap,
2664
/* The files operations structure of the driver */
2665
static const struct file_operations sep_file_operations = {
2666
.owner = THIS_MODULE,
2667
.unlocked_ioctl = sep_ioctl,
2670
.release = sep_release,
2675
* sep_register_driver_with_fs - register misc devices
2676
* @sep: pointer to struct sep_device
2678
* This function registers the driver with the file system
2680
static int sep_register_driver_with_fs(struct sep_device *sep)
2684
sep->miscdev_sep.minor = MISC_DYNAMIC_MINOR;
2685
sep->miscdev_sep.name = SEP_DEV_NAME;
2686
sep->miscdev_sep.fops = &sep_file_operations;
2688
sep->miscdev_singleton.minor = MISC_DYNAMIC_MINOR;
2689
sep->miscdev_singleton.name = SEP_DEV_SINGLETON;
2690
sep->miscdev_singleton.fops = &singleton_file_operations;
2692
sep->miscdev_daemon.minor = MISC_DYNAMIC_MINOR;
2693
sep->miscdev_daemon.name = SEP_DEV_DAEMON;
2694
sep->miscdev_daemon.fops = &daemon_file_operations;
2696
ret_val = misc_register(&sep->miscdev_sep);
2698
dev_warn(&sep->pdev->dev, "misc reg fails for SEP %x\n",
2703
ret_val = misc_register(&sep->miscdev_singleton);
2705
dev_warn(&sep->pdev->dev, "misc reg fails for sing %x\n",
2707
misc_deregister(&sep->miscdev_sep);
2711
ret_val = misc_register(&sep->miscdev_daemon);
2713
dev_warn(&sep->pdev->dev, "misc reg fails for dmn %x\n",
2715
misc_deregister(&sep->miscdev_sep);
2716
misc_deregister(&sep->miscdev_singleton);
2725
* sep_probe - probe a matching PCI device
2727
* @end: pci_device_id
2729
* Attempt to set up and configure a SEP device that has been
2730
* discovered by the PCI layer.
2732
static int __devinit sep_probe(struct pci_dev *pdev,
2733
const struct pci_device_id *ent)
2736
struct sep_device *sep;
2738
if (sep_dev != NULL) {
2739
dev_warn(&pdev->dev, "only one SEP supported.\n");
2743
/* Enable the device */
2744
error = pci_enable_device(pdev);
2746
dev_warn(&pdev->dev, "error enabling pci device\n");
2750
/* Allocate the sep_device structure for this device */
2751
sep_dev = kzalloc(sizeof(struct sep_device), GFP_ATOMIC);
2752
if (sep_dev == NULL) {
2753
dev_warn(&pdev->dev,
2754
"can't kmalloc the sep_device structure\n");
2756
goto end_function_disable_device;
2760
* We're going to use another variable for actually
2761
* working with the device; this way, if we have
2762
* multiple devices in the future, it would be easier
2763
* to make appropriate changes
2767
sep->pdev = pci_dev_get(pdev);
2769
init_waitqueue_head(&sep->event);
2770
init_waitqueue_head(&sep->event_request_daemon);
2771
spin_lock_init(&sep->snd_rply_lck);
2772
mutex_init(&sep->sep_mutex);
2773
mutex_init(&sep->ioctl_mutex);
2775
dev_dbg(&sep->pdev->dev, "sep probe: PCI obtained, device being prepared\n");
2776
dev_dbg(&sep->pdev->dev, "revision is %d\n", sep->pdev->revision);
2778
/* Set up our register area */
2779
sep->reg_physical_addr = pci_resource_start(sep->pdev, 0);
2780
if (!sep->reg_physical_addr) {
2781
dev_warn(&sep->pdev->dev, "Error getting register start\n");
2783
goto end_function_free_sep_dev;
2786
sep->reg_physical_end = pci_resource_end(sep->pdev, 0);
2787
if (!sep->reg_physical_end) {
2788
dev_warn(&sep->pdev->dev, "Error getting register end\n");
2790
goto end_function_free_sep_dev;
2793
sep->reg_addr = ioremap_nocache(sep->reg_physical_addr,
2794
(size_t)(sep->reg_physical_end - sep->reg_physical_addr + 1));
2795
if (!sep->reg_addr) {
2796
dev_warn(&sep->pdev->dev, "Error getting register virtual\n");
2798
goto end_function_free_sep_dev;
2801
dev_dbg(&sep->pdev->dev,
2802
"Register area start %llx end %llx virtual %p\n",
2803
(unsigned long long)sep->reg_physical_addr,
2804
(unsigned long long)sep->reg_physical_end,
2807
/* Allocate the shared area */
2808
sep->shared_size = SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES +
2809
SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES +
2810
SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES +
2811
SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES +
2812
SEP_DRIVER_SYSTEM_DATA_MEMORY_SIZE_IN_BYTES;
2814
if (sep_map_and_alloc_shared_area(sep)) {
2816
/* Allocation failed */
2817
goto end_function_error;
2820
/* Clear ICR register */
2821
sep_write_reg(sep, HW_HOST_ICR_REG_ADDR, 0xFFFFFFFF);
2823
/* Set the IMR register - open only GPR 2 */
2824
sep_write_reg(sep, HW_HOST_IMR_REG_ADDR, (~(0x1 << 13)));
2826
/* Read send/receive counters from SEP */
2827
sep->reply_ct = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
2828
sep->reply_ct &= 0x3FFFFFFF;
2829
sep->send_ct = sep->reply_ct;
2831
/* Get the interrupt line */
2832
error = request_irq(pdev->irq, sep_inthandler, IRQF_SHARED,
2836
goto end_function_deallocate_sep_shared_area;
2838
/* The new chip requires a shared area reconfigure */
2839
if (sep->pdev->revision == 4) { /* Only for new chip */
2840
error = sep_reconfig_shared_area(sep);
2842
goto end_function_free_irq;
2844
/* Finally magic up the device nodes */
2845
/* Register driver with the fs */
2846
error = sep_register_driver_with_fs(sep);
2851
end_function_free_irq:
2852
free_irq(pdev->irq, sep);
2854
end_function_deallocate_sep_shared_area:
2855
/* De-allocate shared area */
2856
sep_unmap_and_free_shared_area(sep);
2859
iounmap(sep->reg_addr);
2861
end_function_free_sep_dev:
2862
pci_dev_put(sep_dev->pdev);
2866
end_function_disable_device:
2867
pci_disable_device(pdev);
2873
static void sep_remove(struct pci_dev *pdev)
2875
struct sep_device *sep = sep_dev;
2877
/* Unregister from fs */
2878
misc_deregister(&sep->miscdev_sep);
2879
misc_deregister(&sep->miscdev_singleton);
2880
misc_deregister(&sep->miscdev_daemon);
2883
free_irq(sep->pdev->irq, sep);
2885
/* Free the shared area */
2886
sep_unmap_and_free_shared_area(sep_dev);
2887
iounmap((void *) sep_dev->reg_addr);
2890
static DEFINE_PCI_DEVICE_TABLE(sep_pci_id_tbl) = {
2891
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MFLD_PCI_DEVICE_ID)},
2895
MODULE_DEVICE_TABLE(pci, sep_pci_id_tbl);
2897
/* Field for registering driver to PCI device */
2898
static struct pci_driver sep_pci_driver = {
2899
.name = "sep_sec_driver",
2900
.id_table = sep_pci_id_tbl,
2902
.remove = sep_remove
2907
* sep_init - init function
2909
* Module load time. Register the PCI device driver.
2911
static int __init sep_init(void)
2913
return pci_register_driver(&sep_pci_driver);
2918
* sep_exit - called to unload driver
2920
* Drop the misc devices then remove and unmap the various resources
2921
* that are not released by the driver remove method.
2923
static void __exit sep_exit(void)
2925
pci_unregister_driver(&sep_pci_driver);
2929
module_init(sep_init);
2930
module_exit(sep_exit);
2932
MODULE_LICENSE("GPL");