1
This is a short overview for the reference clocks currently supported
2
by xntp V3. (Ultimate wisdom can be obtained from xntpd/refclock_*.c
3
this file was derived from that information - unfortunately some comments
4
in the files tend to get stale - so use with caution)
7
127.127.0.x no clock (fails to configure)
8
127.127.1.x local clock - use local clock as reference
9
127.127.2.x no clock (fails to configure)
10
127.127.3.x PSTI 1010/1020 WWV Clock
11
127.127.4.x SPECTRACOM WWVB receiver 8170 and Netclock/2
12
127.127.5.x Kinimetric Truetime 468-DC GOES receiver
13
127.127.6.x IRIG audio decode (Sun & modified BSD audio driver)
14
127.127.7.x CHU Timecode (via normal receiver & Bell 103 modem)
15
127.127.8.x PARSE (generic driver for a bunch of DCF/GPS clocks
16
can be extended for other clocks too)
17
8.0-3 Meinberg PZF535/TCXO
18
8.4-7 Meinberg PZF535/OCXO
19
8.8-11 Meinberg DCF U/A 31
21
8.16-19 Walter Schmid DCF receiver (Kit)
22
8.20-23 Conrad DCF77 receiver module + level converter (Kit)
23
8.24-27 TimeBrick (limited availability ask
24
time@informatik.uni-erlangen.de)
25
8.28-31 Meinberg GPS166
26
8.32-35 Trimble SV6 GPS receiver
27
127.127.9.x MX4200 GPS receiver
28
127.127.10.x Austron 2201A GPS Timing Receiver
29
127.127.11.x Kinemetrics Truetime OM-DC OMEGA Receiver
30
127.127.12.x KSI/Odetecs TPRO-S IRIG-B / TPRO-SAT GPS
31
127.127.13.x Leitch: CSD 5300 Master Clock System Driver
33
127/127.15.x TrueTime GPS/TM-TMD
34
127.127.16.x Bancomm GPS/IRIG Ticktock
35
127.127.17.x Datum Programmable Time System