3
# OpenSSL config: determine the operating system and run ./Configure
5
# "config -h" for usage information.
7
# this is a merge of minarch and GuessOS from the Apache Group.
8
# Originally written by Tim Hudson <tjh@cryptsoft.com>.
10
# Original Apache Group comments on GuessOS
12
# Simple OS/Platform guesser. Similar to config.guess but
13
# much, much smaller. Since it was developed for use with
14
# Apache, it follows under Apache's regular licensing
15
# with one specific addition: Any changes or additions
16
# to this script should be Emailed to the Apache
17
# group (apache@apache.org) in general and to
18
# Jim Jagielski (jim@jaguNET.com) in specific.
20
# Be as similar to the output of config.guess/config.sub
28
# pick up any command line args to config
34
-h*) TEST="true"; cat <<EOF
35
Usage: config [options]
36
-d Add a debug- prefix to machine choice.
37
-t Test mode, do not run the Configure perl script.
40
Any other text will be passed to the Configure perl script.
41
See INSTALL for instructions.
45
*) options=$options" $i" ;;
49
# First get uname entries that we use below
51
[ "$MACHINE" ] || MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown"
52
[ "$RELEASE" ] || RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown"
53
[ "$SYSTEM" ] || SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown"
54
[ "$BUILD" ] || VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown"
57
# Now test for ISC and SCO, since it is has a braindamaged uname.
59
# We need to work around FreeBSD 1.1.5.1
61
XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'`
62
if [ "x$XREL" != "x" ]; then
63
if [ -f /etc/kconfig ]; then
66
echo "${MACHINE}-whatever-isc4"; exit 0
72
echo "whatever-whatever-sco3"; exit 0
75
echo "whatever-whatever-sco5"; exit 0
79
x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;;
80
x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;;
81
x2*) echo "whatever-whatever-unixware2"; exit 0 ;;
85
echo "whatever-whatever-unixware1"; exit 0
89
# We hardcode i586 in place of ${MACHINE} for the
90
# following reason. The catch is that even though Pentium
91
# is minimum requirement for platforms in question,
92
# ${MACHINE} gets always assigned to i386. Now, problem
93
# with i386 is that it makes ./config pass 386 to
94
# ./Configure, which in turn makes make generate
95
# inefficient SHA-1 (for this moment) code.
96
x[678]*) echo "i586-sco-unixware7"; exit 0 ;;
102
# Now we simply scan though... In most cases, the SYSTEM info is enough
104
case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in
106
MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'`
107
echo "parisc-hp-MPE/iX"; exit 0
110
echo "m68k-apple-aux3"; exit 0
114
echo "${MACHINE}-ibm-aix"; exit 0
118
echo "${MACHINE}-ibm-aix"; exit 0
122
echo "${MACHINE}-ibm-aix3"; exit 0
126
echo "${MACHINE}-dg-dgux"; exit 0
130
echo "${MACHINE}-hi-hiux"; exit 0
134
HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'`
136
1[0-9].*) # HPUX 10 and 11 targets are unified
137
echo "${MACHINE}-hp-hpux1x"; exit 0
140
echo "${MACHINE}-hp-hpux"; exit 0
146
echo "mips2-sgi-irix"; exit 0
150
echo "mips3-sgi-irix"; exit 0
154
echo "mips4-sgi-irix64"; exit 0
158
echo "${MACHINE}-whatever-linux2"; exit 0
162
echo "${MACHINE}-whatever-linux1"; exit 0
166
echo "hurd-x86"; exit 0;
170
echo "${MACHINE}-lynx-lynxos"; exit 0
173
BSD/OS:4.*) # BSD/OS always says 386
174
echo "i486-whatever-bsdi4"; exit 0
177
BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*)
178
case `/sbin/sysctl -n hw.model` in
180
echo "i586-whatever-bsdi"; exit 0
183
echo "i386-whatever-bsdi"; exit 0
189
echo "${MACHINE}-whatever-bsdi"; exit 0
193
VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'`
194
MACH=`sysctl -n hw.model`
197
*386* ) MACH="i386" ;;
198
*486* ) MACH="i486" ;;
199
Pentium\ II*) MACH="i686" ;;
200
Pentium* ) MACH="i586" ;;
201
* ) MACH="$MACHINE" ;;
204
i[0-9]86 ) ARCH="pc" ;;
206
echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0
210
echo "${MACHINE}-whatever-freebsd"; exit 0
214
echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0
218
echo "${MACHINE}-whatever-netbsd"; exit 0
222
echo "${MACHINE}-whatever-openbsd"; exit 0
226
echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0
230
OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'`
233
echo "${MACHINE}-dec-tru64"; exit 0
236
echo "${MACHINE}-dec-osf"; exit 0
239
echo "${MACHINE}-dec-osf"; exit 0
247
echo "${MACHINE}-whatever-qnx4"
250
echo "${MACHINE}-whatever-qnx6"
253
echo "${MACHINE}-whatever-qnx"
260
echo "i860-intel-osf1"; exit 0
264
echo "ppc-apple-rhapsody"; exit 0
270
echo "ppc-apple-darwin${VERSION}"
273
echo "i386-apple-darwin${VERSION}"
280
echo "${MACHINE}-whatever-solaris2"; exit 0
284
echo "${MACHINE}-sun-sunos4"; exit 0
288
echo "${MACHINE}-whatever-sysv4"; exit 0
292
echo "i386-stratus-vos"; exit 0
296
echo "hppa1.1-stratus-vos"; exit 0
300
echo "${MACHINE}-whatever-sysv4"; exit 0
304
echo "${MACHINE}-whatever-sysv4"; exit 0
307
*:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*)
308
echo "i486-ncr-sysv4"; exit 0
312
echo "${MACHINE}-unknown-ultrix"; exit 0
316
echo "${MACHINE}-siemens-sysv4"; exit 0
320
echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000"
324
echo "${MACHINE}-tenon-${SYSTEM}"; exit 0;
328
echo "${MACHINE}-ncr-sysv4"; exit 0
332
echo "${MACHINE}-v11-${SYSTEM}"; exit 0;
336
echo "mips-sony-newsos4"; exit 0;
340
echo "${MACHINE}-whatever-mingw"; exit 0;
345
echo "${MACHINE}-whatever-cygwin_pre1.3"
348
echo "${MACHINE}-whatever-cygwin"
355
echo "t3e-cray-unicosmk"; exit 0;
359
echo "j90-cray-unicos"; exit 0;
363
echo "nsr-tandem-nsk"; exit 0;
368
# Ugg. These are all we can determine by what we know about
369
# the output of uname. Be more creative:
372
# Do the Apollo stuff first. Here, we just simply assume
373
# that the existance of the /usr/apollo directory is proof
375
if [ -d /usr/apollo ]; then
376
echo "whatever-apollo-whatever"
381
ISNEXT=`hostinfo 2>/dev/null`
384
echo "whatever-next-nextstep3.3"; exit 0
387
echo "whatever-next-nextstep"; exit 0
391
# At this point we gone through all the one's
394
echo "${MACHINE}-whatever-${SYSTEM}"
398
# ---------------------------------------------------------------------------
399
# this is where the translation occurs into SSLeay terms
400
# ---------------------------------------------------------------------------
402
GCCVER=`(gcc -dumpversion) 2>/dev/null`
403
if [ "$GCCVER" != "" ]; then
404
# then strip off whatever prefix egcs prepends the number with...
405
# Hopefully, this will work for any future prefixes as well.
406
GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'`
407
# Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion
408
# does give us what we want though, so we use that. We just just the
409
# major and minor version numbers.
410
# peak single digit before and after first dot, e.g. 2.95.1 gives 29
411
GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'`
414
# Only set CC if not supplied already
415
if [ -z "$CC" ]; then
416
# figure out if gcc is available and if so we use it otherwise
417
# we fallback to whatever cc does on the system
418
if [ "$GCCVER" != "" ]; then
425
if [ "$SYSTEM" = "HP-UX" ];then
426
# By default gcc is a ILP32 compiler (with long long == 64).
428
if [ $GCCVER -ge 30 ]; then
429
# PA64 support only came in with gcc 3.0.x.
430
# We check if the preprocessor symbol __LP64__ is defined...
431
if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then
432
: # __LP64__ has slipped through, it therefore is not defined
438
if [ "$SYSTEM" = "SunOS" ]; then
439
if [ $GCCVER -ge 30 ]; then
440
# 64-bit ABI isn't officially supported in gcc 3.0, but it appears
441
# to be working, at the very least 'make test' passes...
442
if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then
448
# check for WorkShop C, expected output is "cc: blah-blah C x.x"
449
CCVER=`(cc -V 2>&1) 2>/dev/null | \
450
egrep -e '^cc: .* C [0-9]\.[0-9]' | \
451
sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'`
453
if [ $MACHINE != i86pc -a $CCVER -gt 40 ]; then
454
CC=cc # overrides gcc!!!
455
if [ $CCVER -eq 50 ]; then
456
echo "WARNING! Detected WorkShop C 5.0. Do make sure you have"
457
echo " patch #107357-01 or later applied."
463
if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then
464
# check for Compaq C, expected output is "blah-blah C Vx.x"
465
CCCVER=`(ccc -V 2>&1) 2>/dev/null | \
466
egrep -e '.* C V[0-9]\.[0-9]' | \
467
sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'`
469
if [ $CCCVER -gt 60 ]; then
470
CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably
471
# only on hash routines and des, otherwise gcc (2.95)
472
# keeps along rather tight...
476
if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc
477
(cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc
482
# read the output of the embedded GuessOS
485
echo Operating system: $GUESSOS
487
# now map the output into SSLeay terms ... really should hack into the
488
# script above so we end up with values in vars but that would take
489
# more time that I want to waste at the moment
492
CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
494
if [ $CPU -ge 4000 ]; then
495
options="$options -mips2"
500
#CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
502
#if [ $CPU -ge 5000 ]; then
503
# options="$options -mips4"
505
# options="$options -mips3"
510
echo "WARNING! If you wish to build 64-bit library, then you have to"
511
echo " invoke './Configure irix64-mips4-$CC' *manually*."
512
if [ "$TEST" = "false" -a -t 1 ]; then
513
echo " You have about 5 seconds to press Ctrl-C to abort."
514
(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
516
#CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'`
518
#if [ $CPU -ge 5000 ]; then
519
# options="$options -mips4"
521
# options="$options -mips3"
525
ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;;
526
ppc-apple-darwin*) OUT="darwin-ppc-cc" ;;
527
i386-apple-darwin*) OUT="darwin-i386-cc" ;;
529
ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo`
530
case ${ISA:-generic} in
531
*[678]) OUT="linux-alpha+bwx-$CC" ;;
532
*) OUT="linux-alpha-$CC" ;;
534
if [ "$CC" = "gcc" ]; then
535
case ${ISA:-generic} in
536
EV5|EV45) options="$options -mcpu=ev5";;
537
EV56|PCA56) options="$options -mcpu=ev56";;
538
*) options="$options -mcpu=ev6";;
543
echo "WARNING! If you wish to build 64-bit library, then you have to"
544
echo " invoke './Configure linux-ppc64' *manually*."
545
if [ "$TEST" = "false" -a -t 1 ]; then
546
echo " You have about 5 seconds to press Ctrl-C to abort."
547
(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
551
ppc-*-linux2) OUT="linux-ppc" ;;
552
ia64-*-linux?) OUT="linux-ia64" ;;
554
echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI"
555
echo " and wish to build 64-bit library, then you have to"
556
echo " invoke './Configure linux64-sparcv9' *manually*."
557
if [ "$TEST" = "false" -a -t 1 ]; then
558
echo " You have about 5 seconds to press Ctrl-C to abort."
559
(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
561
OUT="linux-sparcv9" ;;
563
KARCH=`awk '/^type/{print$3;exit(0);}' /proc/cpuinfo`
564
case ${KARCH:-sun4} in
565
sun4u*) OUT="linux-sparcv9" ;;
566
sun4m) OUT="linux-sparcv8" ;;
567
sun4d) OUT="linux-sparcv8" ;;
568
*) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
571
# 64-bit builds under parisc64 linux are not supported and
572
# compiler is expected to generate 32-bit objects...
573
CPUARCH=`awk '/cpu family/{print substr($5,1,3); exit(0);}' /proc/cpuinfo`
574
CPUSCHEDULE=`awk '/^cpu.[ ]*: PA/{print substr($3,3); exit(0);}' /proc/cpuinfo`
576
# ??TODO ?? Model transformations
577
# 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off
578
# assuming no further arch. identification will ever be used by GCC.
579
# 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC.
580
# 2. The variant 64-bit processors cause concern should GCC support explicit schedulers
581
# for these chips in the future.
582
# PA7300LC -> 7100LC (1.1)
583
# PA8200 -> 8000 (2.0)
584
# PA8500 -> 8000 (2.0)
585
# PA8600 -> 8000 (2.0)
587
CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8.00/8000/'`
588
# Finish Model transformations
590
options="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH"
591
OUT="linux-generic32" ;;
592
arm*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
593
arm*l-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;;
594
sh*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
595
sh*-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;;
596
m68k*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;;
597
s390-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN -DNO_ASM" ;;
598
s390x-*-linux2) OUT="linux-generic64"; options="$options -DB_ENDIAN" ;;
599
x86_64-*-linux?) OUT="linux-x86_64" ;;
600
*86-*-linux2) OUT="linux-elf"
601
if [ "$GCCVER" -gt 28 ]; then
602
if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then
603
options="$options -march=pentium"
605
if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then
606
options="$options -march=pentiumpro"
608
if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then
609
options="$options -march=k6"
612
*-*-linux1) OUT="linux-aout" ;;
613
*-*-linux2) OUT="linux-generic32" ;;
614
sun4[uv]*-*-solaris2)
615
OUT="solaris-sparcv9-$CC"
616
ISA64=`(isalist) 2>/dev/null | grep sparcv9`
617
if [ "$ISA64" != "" ]; then
618
if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then
619
echo "WARNING! If you wish to build 64-bit library, then you have to"
620
echo " invoke './Configure solaris64-sparcv9-cc' *manually*."
621
if [ "$TEST" = "false" -a -t 1 ]; then
622
echo " You have about 5 seconds to press Ctrl-C to abort."
623
(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
625
elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then
626
# $GCC_ARCH denotes default ABI chosen by compiler driver
627
# (first one found on the $PATH). I assume that user
628
# expects certain consistency with the rest of his builds
629
# and therefore switch over to 64-bit. <appro>
630
OUT="solaris64-sparcv9-gcc"
631
echo "WARNING! If you wish to build 32-bit library, then you have to"
632
echo " invoke './Configure solaris-sparcv9-gcc' *manually*."
633
if [ "$TEST" = "false" -a -t 1 ]; then
634
echo " You have about 5 seconds to press Ctrl-C to abort."
635
(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
637
elif [ "$GCC_ARCH" = "-m32" ]; then
638
echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI"
639
echo " and wish to build 64-bit library, then you have to"
640
echo " invoke './Configure solaris64-sparcv9-gcc' *manually*."
641
if [ "$TEST" = "false" -a -t 1 ]; then
642
echo " You have about 5 seconds to press Ctrl-C to abort."
643
(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
648
sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
649
sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;;
650
sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;;
652
ISA64=`(isalist) 2>/dev/null | grep amd64`
653
if [ "$ISA64" != "" ]; then
654
OUT="solaris64-x86_64-$CC"
656
OUT="solaris-x86-$CC"
657
if [ `uname -r | sed -e 's/5\.//'` -lt 10 ]; then
658
options="$options no-sse2"
662
*-*-sunos4) OUT="sunos-$CC" ;;
664
*86*-*-bsdi4) OUT="BSD-x86-elf"; options="$options no-sse2 -ldl" ;;
665
alpha*-*-*bsd*) OUT="BSD-generic64"; options="$options -DL_ENDIAN" ;;
666
powerpc64-*-*bsd*) OUT="BSD-generic64"; options="$options -DB_ENDIAN" ;;
667
sparc64-*-*bsd*) OUT="BSD-sparc64" ;;
668
ia64-*-*bsd*) OUT="BSD-ia64" ;;
669
amd64-*-*bsd*) OUT="BSD-x86_64" ;;
670
*86*-*-*bsd*) # mimic ld behaviour when it's looking for libc...
671
if [ -L /usr/lib/libc.so ]; then # [Free|Net]BSD
672
libc=/usr/lib/libc.so
674
# ld searches for highest libc.so.* and so do we
675
libc=`(ls /usr/lib/libc.so.* | tail -1) 2>/dev/null`
677
case "`(file -L $libc) 2>/dev/null`" in
678
*ELF*) OUT="BSD-x86-elf" ;;
679
*) OUT="BSD-x86"; options="$options no-sse2" ;;
681
*-*-*bsd*) OUT="BSD-generic32" ;;
683
*-*-osf) OUT="osf1-alpha-cc" ;;
684
*-*-tru64) OUT="tru64-alpha-cc" ;;
686
if [ "$CC" = "gcc" ]; then
687
OUT="unixware-7-gcc" ; options="$options no-sse2"
689
OUT="unixware-7" ; options="$options no-sse2 -D__i386__"
692
*-*-[Uu]nix[Ww]are20*) OUT="unixware-2.0"; options="$options no-sse2 no-sha512" ;;
693
*-*-[Uu]nix[Ww]are21*) OUT="unixware-2.1"; options="$options no-sse2 no-sha512" ;;
695
options="$options no-threads no-shared no-asm no-dso"
698
BS2000-siemens-sysv4) OUT="BS2000-OSD" ;;
699
RM*-siemens-sysv4) OUT="ReliantUNIX" ;;
700
*-siemens-sysv4) OUT="SINIX" ;;
702
if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then
703
OUT="hpux64-parisc2-gcc"
705
KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null`
706
KERNEL_BITS=${KERNEL_BITS:-32}
707
CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null`
708
CPU_VERSION=${CPU_VERSION:-0}
709
# See <sys/unistd.h> for further info on CPU_VERSION.
710
if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU
711
echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi."
712
echo " If you wish to build 32-bit library, the you have to"
713
echo " invoke './Configure hpux-ia64-cc' *manually*."
714
if [ "$TEST" = "false" -a -t 1 ]; then
715
echo " You have about 5 seconds to press Ctrl-C to abort."
716
(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
719
elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU
720
OUT=${OUT:-"hpux-parisc2-${CC}"}
721
if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then
722
echo "WARNING! If you wish to build 64-bit library then you have to"
723
echo " invoke './Configure hpux64-parisc2-cc' *manually*."
724
if [ "$TEST" = "false" -a -t 1 ]; then
725
echo " You have about 5 seconds to press Ctrl-C to abort."
726
(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
729
elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU
730
OUT="hpux-parisc-${CC}"
731
elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU
732
OUT="hpux-parisc-${CC}"
733
else # Motorola(?) CPU
736
options="$options -D_REENTRANT" ;;
737
*-hpux) OUT="hpux-parisc-$CC" ;;
739
KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null`
740
KERNEL_BITS=${KERNEL_BITS:-32}
741
OBJECT_MODE=${OBJECT_MODE:-32}
742
if [ "$CC" = "gcc" ]; then
744
if [ $OBJECT_MODE -eq 64 ]; then
745
echo 'Your $OBJECT_MODE was found to be set to 64'
748
elif [ $OBJECT_MODE -eq 64 ]; then
749
echo 'Your $OBJECT_MODE was found to be set to 64'
753
if [ $KERNEL_BITS -eq 64 ]; then
754
echo "WARNING! If you wish to build 64-bit kit, then you have to"
755
echo " invoke './Configure aix64-cc' *manually*."
756
if [ "$TEST" = "false" -a -t 1 ]; then
757
echo " You have ~5 seconds to press Ctrl-C to abort."
758
(trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1
762
if (lsattr -E -O -l `lsdev -c processor|awk '{print$1;exit}'` | grep -i powerpc) >/dev/null 2>&1; then
763
: # this applies even to Power3 and later, as they return PowerPC_POWER[345]
765
options="$options no-asm"
768
# these are all covered by the catchall below
769
# *-dgux) OUT="dgux" ;;
770
mips-sony-newsos4) OUT="newsos4-gcc" ;;
771
*-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;;
772
*-*-cygwin) OUT="Cygwin" ;;
773
t3e-cray-unicosmk) OUT="cray-t3e" ;;
774
j90-cray-unicos) OUT="cray-j90" ;;
775
nsr-tandem-nsk) OUT="tandem-c89" ;;
776
x86pc-*-qnx6) OUT="QNX6-i386" ;;
777
*-*-qnx6) OUT="QNX6" ;;
778
*) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;;
781
# NB: This atalla support has been superceded by the ENGINE support
782
# That contains its own header and definitions anyway. Support can
783
# be enabled or disabled on any supported platform without external
784
# headers, eg. by adding the "hw-atalla" switch to ./config or
787
# See whether we can compile Atalla support
788
#if [ -f /usr/include/atasi.h ]
790
# options="$options -DATALLA"
793
# gcc < 2.8 does not support -march=ultrasparc
794
if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ]
796
echo "WARNING! Falling down to 'solaris-sparcv8-gcc'."
797
echo " Upgrade to gcc-2.8 or later."
799
OUT=solaris-sparcv8-gcc
801
if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ]
803
echo "WARNING! Falling down to 'linux-sparcv8'."
804
echo " Upgrade to gcc-2.8 or later."
810
i386-*) options="$options 386" ;;
813
for i in aes bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa seed sha
815
if [ ! -d crypto/$i ]
817
options="$options no-$i"
821
# Discover Kerberos 5 (since it's still a prototype, we don't
822
# do any guesses yet, that's why this section is commented away.
823
#if [ -d /usr/kerberos ]; then
824
# krb5_dir=/usr/kerberos
825
# if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\
826
# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
827
# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
828
# -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\
829
# -a \( -f $krb5_dir/include/krb5.h \) ]; then
830
# options="$options --with-krb5-flavor=MIT"
832
#elif [ -d /usr/heimdal ]; then
833
# krb5_dir=/usr/heimdal
834
# if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\
835
# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\
836
# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\
837
# -a \( -f $krb5_dir/include/krb5.h \) ]; then
838
# options="$options --with-krb5-flavor=Heimdal"
842
if [ -z "$OUT" ]; then
846
if [ ".$PERL" = . ] ; then
847
for i in . `echo $PATH | sed 's/:/ /g'`; do
848
if [ -f "$i/perl5$EXE" ] ; then
855
if [ ".$PERL" = . ] ; then
856
for i in . `echo $PATH | sed 's/:/ /g'`; do
857
if [ -f "$i/perl$EXE" ] ; then
858
if "$i/perl$EXE" -e 'exit($]<5.0)'; then
866
if [ ".$PERL" = . ] ; then
867
echo "You need Perl 5."
871
# run Configure to check to see if we need to specify the
872
# compiler for the platform ... in which case we add it on
873
# the end ... otherwise we leave it off
875
$PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null
876
if [ $? = "0" ]; then
882
$PERL ./Configure LIST | grep "$OUT" > /dev/null
883
if [ $? = "0" ]; then
884
echo Configuring for $OUT
886
if [ "$TEST" = "true" ]; then
887
echo $PERL ./Configure $OUT $options
889
$PERL ./Configure $OUT $options
892
echo "This system ($OUT) is not supported. See file INSTALL for details."