1
.TH bcmxcp 8 "Tue Oct 15 2002" "" "Network UPS Tools (NUT)"
1
.TH BCMXCP 8 "Sun Sep 19 2004" "" "Network UPS Tools (NUT)"
3
bcmxcp \- Driver for Powerware BCM/XCP UPS equipment
3
bcmxcp \- Driver for UPS'es supporting the BCM/XCP protocol
5
This man page only documents the hardware-specific features of the
5
This man page only documents the hardware\(hyspecific features of the
6
6
bcmxcp driver. For information about the core driver, see
9
9
.SH SUPPORTED HARDWARE
10
Powerware 9120, perhaps others that use the BCM/XCP protocol too.
10
This driver should recognize all BCM/XCP-compatible UPS'es. It has
11
been developed and tested on Powerware PW5115 and PW9120 hardware.
12
13
.SH EXTRA ARGUMENTS
14
This driver does not support any extra settings in the
15
This driver supports the following optional settings in the
18
.IP "shutdown_delay=\fIdelay\fR"
19
The number of seconds that the UPS should wait between receiving the
20
shutdown command and actually shutting off.
22
.SH DEFAULT VALUES FOR THE EXTRA ARGUMENTS
23
.IP "shutdown_delay = \fI180\fR"
26
This driver supports the following Instant Commands:
29
Turn off the load and return when power is back.
31
.IP "shutdown.stayoff"
32
Turn off the load and remain off.
34
.IP "test.battery.start"
39
.IP "Report UPS alarm status"
40
BCM/XCP supports reporting a wide range of UPS alarm conditions.
42
.IP "Report UPS statistics informations"
43
BCM/XCP supports reporting of UPS statistics data.
50
Tore �rpetveit <tore@orpetveit.net>
added
removed
man/bcmxcp.8
