1
# You may now use double quotes around pathnames, in case
2
# your pathname includes spaces.
4
#=======================================================================
7
# The configuration interface is a series of menus or dialog boxes that
8
# allows you to change all the settings that control Bochs's behavior.
9
# There are two choices of configuration interface: a text mode version
10
# called "textconfig" and a graphical version called "wx". The text
11
# mode version uses stdin/stdout and is always compiled in. The graphical
12
# version is only available when you use "--with-wx" on the configure
13
# command. If you do not write a config_interface line, Bochs will
14
# choose a default for you.
16
# NOTE: if you use the "wx" configuration interface, you must also use
17
# the "wx" display library.
18
#=======================================================================
19
#config_interface: textconfig
22
#=======================================================================
25
# The display library is the code that displays the Bochs VGA screen. Bochs
26
# has a selection of about 10 different display library implementations for
27
# different platforms. If you run configure with multiple --with-* options,
28
# the display_library command lets you choose which one you want to run with.
29
# If you do not write a display_library line, Bochs will choose a default for
33
# x use X windows interface, cross platform
34
# win32 use native win32 libraries
35
# carbon use Carbon library (for MacOS X)
36
# beos use native BeOS libraries
37
# macintosh use MacOS pre-10
38
# amigaos use native AmigaOS libraries
39
# sdl use SDL library, cross platform
40
# svga use SVGALIB library for Linux, allows graphics without X11
41
# term text only, uses curses/ncurses library, cross platform
42
# rfb provides an interface to AT&T's VNC viewer, cross platform
43
# wx use wxWidgets library, cross platform
44
# nogui no display at all
46
# NOTE: if you use the "wx" configuration interface, you must also use
47
# the "wx" display library.
50
# Some display libraries now support specific option to control their
51
# behaviour. See the examples below for currently supported options.
52
#=======================================================================
53
#display_library: amigaos
54
#display_library: beos
55
#display_library: carbon
56
#display_library: macintosh
57
#display_library: nogui
58
#display_library: rfb, options="timeout=60" # time to wait for client
59
#display_library: sdl, options="fullscreen" # startup in fullscreen mode
60
#display_library: term
61
#display_library: win32, options="legacyF12" # use F12 to toggle mouse
65
#=======================================================================
67
# The ROM BIOS controls what the PC does when it first powers on.
68
# Normally, you can use a precompiled BIOS in the source or binary
69
# distribution called BIOS-bochs-latest. The ROM BIOS is usually loaded
70
# starting at address 0xf0000, and it is exactly 64k long.
71
# You can also use the environment variable $BXSHARE to specify the
72
# location of the BIOS.
73
# The usage of external large BIOS images (up to 512k) at memory top is
74
# now supported, but we still recommend to use the BIOS distributed with
75
# Bochs. Now the start address can be calculated from image size.
76
#=======================================================================
77
romimage: file=bochs/bios/BIOS-bochs-latest, address=0xe0000
78
#romimage: file=mybios.bin, address=0xfff80000 # 512k at memory top
79
#romimage: file=mybios.bin # calculate start address from image size
81
#=======================================================================
83
# This defines cpu-related parameters inside Bochs:
86
# Set the number of processors:cores per processor:threads per core
87
# when Bochs is compiled for SMP emulation.
88
# Bochs currently supports up to 8 threads running simultaniosly.
89
# If Bochs is compiled without SMP support, it won't accept values
92
# RESET_ON_TRIPLE_FAULT:
93
# Reset the CPU when triple fault occur (highly recommended) rather than
94
# PANIC. Remember that if you trying to continue after triple fault the
95
# simulation will be completely bogus !
98
# Emulated Instructions Per Second. This is the number of IPS that bochs
99
# is capable of running on your machine. You can recompile Bochs with
100
# --enable-show-ips option enabled, to find your workstation's capability.
101
# Measured IPS value will then be logged into your log file or status bar
102
# (if supported by the gui).
104
# IPS is used to calibrate many time-dependent events within the bochs
105
# simulation. For example, changing IPS affects the frequency of VGA
106
# updates, the duration of time before a key starts to autorepeat, and
107
# the measurement of BogoMips and other benchmarks.
111
# ________________________________________________________________
112
# 2.1Ghz Athlon XP with Linux 2.6/g++ 3.4 12 to 15 Mips
113
# 1.6Ghz Intel P4 with Win2000/g++ 3.3 5 to 7 Mips
114
# 650Mhz Athlon K-7 with Linux 2.4.4/egcs-2.91.66 2 to 2.5 Mips
115
# 400Mhz Pentium II with Linux 2.0.36/egcs-1.0.3 1 to 1.8 Mips
116
#=======================================================================
117
cpu: count=1, ips=10000000, reset_on_triple_fault=1
119
#=======================================================================
121
# Set the number of Megabytes of physical memory you want to emulate.
122
# The default is 32MB, most OS's won't need more than that.
123
# The maximum amount of memory supported is 2048Mb.
124
#=======================================================================
132
#=======================================================================
134
# You may now load up to 4 optional ROM images. Be sure to use a
135
# read-only area, typically between C8000 and EFFFF. These optional
136
# ROM images should not overwrite the rombios (located at
137
# F0000-FFFFF) and the videobios (located at C0000-C7FFF).
138
# Those ROM images will be initialized by the bios if they contain
139
# the right signature (0x55AA) and a valid checksum.
140
# It can also be a convenient way to upload some arbitrary code/data
141
# in the simulation, that can be retrieved by the boot loader
142
#=======================================================================
143
#optromimage1: file=optionalrom.bin, address=0xd0000
144
#optromimage2: file=optionalrom.bin, address=0xd1000
145
#optromimage3: file=optionalrom.bin, address=0xd2000
146
#optromimage4: file=optionalrom.bin, address=0xd3000
147
optromimage1: file=../../src/bin/pnic.rom, address=0xd0000
148
#optromimage1: file=../../src/bin/rtl8029.rom, address=0xd0000
150
#optramimage1: file=/path/file1.img, address=0x0010000
151
#optramimage2: file=/path/file2.img, address=0x0020000
152
#optramimage3: file=/path/file3.img, address=0x0030000
153
#optramimage4: file=/path/file4.img, address=0x0040000
155
#=======================================================================
157
# You now need to load a VGA ROM BIOS into C0000.
158
#=======================================================================
159
#vgaromimage: file=bios/VGABIOS-elpin-2.40
160
vgaromimage: file=bochs/bios/VGABIOS-lgpl-latest
161
#vgaromimage: file=bios/VGABIOS-lgpl-latest-cirrus
163
#=======================================================================
165
# Here you can specify the display extension to be used. With the value
166
# 'none' you can use standard VGA with no extension. Other supported
167
# values are 'vbe' for Bochs VBE and 'cirrus' for Cirrus SVGA support.
168
#=======================================================================
169
#vga: extension=cirrus
173
#=======================================================================
175
# Point this to pathname of floppy image file or device
176
# This should be of a bootable floppy(image/device) if you're
177
# booting from 'a' (or 'floppy').
179
# You can set the initial status of the media to 'ejected' or 'inserted'.
180
# floppya: 2_88=path, status=ejected (2.88M 3.5" floppy)
181
# floppya: 1_44=path, status=inserted (1.44M 3.5" floppy)
182
# floppya: 1_2=path, status=ejected (1.2M 5.25" floppy)
183
# floppya: 720k=path, status=inserted (720K 3.5" floppy)
184
# floppya: 360k=path, status=inserted (360K 5.25" floppy)
185
# floppya: 320k=path, status=inserted (320K 5.25" floppy)
186
# floppya: 180k=path, status=inserted (180K 5.25" floppy)
187
# floppya: 160k=path, status=inserted (160K 5.25" floppy)
188
# floppya: image=path, status=inserted (guess type from image size)
190
# The path should be the name of a disk image file. On Unix, you can use a raw
191
# device name such as /dev/fd0 on Linux. On win32 platforms, use drive letters
192
# such as a: or b: as the path. The parameter 'image' works with image files
193
# only. In that case the size must match one of the supported types.
194
#=======================================================================
195
#floppya: 1_44=/dev/fd0, status=inserted
196
#floppya: image=../1.44, status=inserted
197
#floppya: 1_44=/dev/fd0H1440, status=inserted
198
#floppya: 1_2=../1_2, status=inserted
199
#floppya: 1_44=a:, status=inserted
200
#floppya: 1_44=a.img, status=inserted
201
#floppya: 1_44=/dev/rfd0a, status=inserted
202
floppya: 1_44=../../src/bin/pnic.dsk, status=inserted
204
#=======================================================================
206
# See FLOPPYA above for syntax
207
#=======================================================================
208
#floppyb: 1_44=b:, status=inserted
209
floppyb: 1_44=b.img, status=inserted
211
#=======================================================================
212
# ATA0, ATA1, ATA2, ATA3
213
# ATA controller for hard disks and cdroms
215
# ata[0-3]: enabled=[0|1], ioaddr1=addr, ioaddr2=addr, irq=number
217
# These options enables up to 4 ata channels. For each channel
218
# the two base io addresses and the irq must be specified.
220
# ata0 and ata1 are enabled by default with the values shown below
223
# ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
224
# ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
225
# ata2: enabled=1, ioaddr1=0x1e8, ioaddr2=0x3e0, irq=11
226
# ata3: enabled=1, ioaddr1=0x168, ioaddr2=0x360, irq=9
227
#=======================================================================
228
ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
229
ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
230
ata2: enabled=0, ioaddr1=0x1e8, ioaddr2=0x3e0, irq=11
231
ata3: enabled=0, ioaddr1=0x168, ioaddr2=0x360, irq=9
233
#=======================================================================
234
# ATA[0-3]-MASTER, ATA[0-3]-SLAVE
236
# This defines the type and characteristics of all attached ata devices:
237
# type= type of attached device [disk|cdrom]
238
# mode= only valid for disks [flat|concat|external|dll|sparse|vmware3]
239
# mode= only valid for disks [undoable|growing|volatile]
240
# path= path of the image
241
# cylinders= only valid for disks
242
# heads= only valid for disks
243
# spt= only valid for disks
244
# status= only valid for cdroms [inserted|ejected]
245
# biosdetect= type of biosdetection [none|auto], only for disks on ata0 [cmos]
246
# translation=type of translation of the bios, only for disks [none|lba|large|rechs|auto]
247
# model= string returned by identify device command
248
# journal= optional filename of the redolog for undoable and volatile disks
250
# Point this at a hard disk image file, cdrom iso file, or physical cdrom
251
# device. To create a hard disk image, try running bximage. It will help you
252
# choose the size and then suggest a line that works with it.
254
# In UNIX it may be possible to use a raw device as a Bochs hard disk,
255
# but WE DON'T RECOMMEND IT. In Windows there is no easy way.
257
# In windows, the drive letter + colon notation should be used for cdroms.
258
# Depending on versions of windows and drivers, you may only be able to
259
# access the "first" cdrom in the system. On MacOSX, use path="drive"
260
# to access the physical drive.
262
# The path is always mandatory. For flat hard disk images created with
263
# bximage geometry autodetection can be used (cylinders=0 -> cylinders are
264
# calculated using heads=16 and spt=63). For other hard disk images and modes
265
# the cylinders, heads, and spt are mandatory.
267
# Default values are:
268
# mode=flat, biosdetect=auto, translation=auto, model="Generic 1234"
270
# The biosdetect option has currently no effect on the bios
273
# ata0-master: type=disk, mode=flat, path=10M.sample, cylinders=306, heads=4, spt=17
274
# ata0-slave: type=disk, mode=flat, path=20M.sample, cylinders=615, heads=4, spt=17
275
# ata1-master: type=disk, mode=flat, path=30M.sample, cylinders=615, heads=6, spt=17
276
# ata1-slave: type=disk, mode=flat, path=46M.sample, cylinders=940, heads=6, spt=17
277
# ata2-master: type=disk, mode=flat, path=62M.sample, cylinders=940, heads=8, spt=17
278
# ata2-slave: type=disk, mode=flat, path=112M.sample, cylinders=900, heads=15, spt=17
279
# ata3-master: type=disk, mode=flat, path=483M.sample, cylinders=1024, heads=15, spt=63
280
# ata3-slave: type=cdrom, path=iso.sample, status=inserted
281
#=======================================================================
282
#ata0-master: type=disk, mode=flat, path="30M.sample", cylinders=615, heads=6, spt=17
283
#ata0-slave: type=cdrom, path=D:, status=inserted
284
#ata0-slave: type=cdrom, path=/dev/cdrom, status=inserted
285
#ata0-slave: type=cdrom, path="drive", status=inserted
286
#ata0-slave: type=cdrom, path=/dev/rcd0d, status=inserted
288
#=======================================================================
290
# This defines the boot sequence. Now you can specify up to 3 boot drives.
291
# You can either boot from 'floppy', 'disk' or 'cdrom'
292
# legacy 'a' and 'c' are also supported
299
# boot: cdrom, floppy, disk
300
#=======================================================================
303
boot: network, floppy
305
#=======================================================================
307
# This defines the parameters of the clock inside Bochs:
310
# TO BE COMPLETED (see Greg explanation in feature request #536329)
313
# Specifies the start (boot) time of the virtual machine. Use a time
314
# value as returned by the time(2) system call. If no time0 value is
315
# set or if time0 equal to 1 (special case) or if time0 equal 'local',
316
# the simulation will be started at the current local host time.
317
# If time0 equal to 2 (special case) or if time0 equal 'utc',
318
# the simulation will be started at the current utc time.
321
# clock: sync=[none|slowdown|realtime|both], time0=[timeValue|local|utc]
324
# clock: sync=none, time0=local # Now (localtime)
325
# clock: sync=slowdown, time0=315529200 # Tue Jan 1 00:00:00 1980
326
# clock: sync=none, time0=631148400 # Mon Jan 1 00:00:00 1990
327
# clock: sync=realtime, time0=938581955 # Wed Sep 29 07:12:35 1999
328
# clock: sync=realtime, time0=946681200 # Sat Jan 1 00:00:00 2000
329
# clock: sync=none, time0=1 # Now (localtime)
330
# clock: sync=none, time0=utc # Now (utc/gmt)
332
# Default value are sync=none, time0=local
333
#=======================================================================
334
#clock: sync=none, time0=local
337
#=======================================================================
338
# FLOPPY_BOOTSIG_CHECK: disabled=[0|1]
339
# Enables or disables the 0xaa55 signature check on boot floppies
340
# Defaults to disabled=0
342
# floppy_bootsig_check: disabled=0
343
# floppy_bootsig_check: disabled=1
344
#=======================================================================
345
#floppy_bootsig_check: disabled=1
346
floppy_bootsig_check: disabled=0
348
#=======================================================================
350
# Give the path of the log file you'd like Bochs debug and misc. verbiage
351
# to be written to. If you don't use this option or set the filename to
352
# '-' the output is written to the console. If you really don't want it,
353
# make it "/dev/null" (Unix) or "nul" (win32). :^(
358
#=======================================================================
362
#=======================================================================
364
# This handles the format of the string prepended to each log line.
365
# You may use those special tokens :
366
# %t : 11 decimal digits timer tick
367
# %i : 8 hexadecimal digits of cpu current eip (ignored in SMP configuration)
368
# %e : 1 character event type ('i'nfo, 'd'ebug, 'p'anic, 'e'rror)
369
# %d : 5 characters string of the device, between brackets
373
# logprefix: %t-%e-@%i-%d
375
#=======================================================================
378
#=======================================================================
381
# Bochs now has four severity levels for event logging.
382
# panic: cannot proceed. If you choose to continue after a panic,
383
# don't be surprised if you get strange behavior or crashes.
384
# error: something went wrong, but it is probably safe to continue the
386
# info: interesting or useful messages.
387
# debug: messages useful only when debugging the code. This may
388
# spit out thousands per second.
390
# For events of each level, you can choose to crash, report, or ignore.
391
# TODO: allow choice based on the facility: e.g. crash on panics from
392
# everything except the cdrom, and only report those.
394
# If you are experiencing many panics, it can be helpful to change
395
# the panic action to report instead of fatal. However, be aware
396
# that anything executed after a panic is uncharted territory and can
397
# cause bochs to become unstable. The panic is a "graceful exit," so
398
# if you disable it you may get a spectacular disaster instead.
399
#=======================================================================
406
#=======================================================================
408
# Give the path of the log file you'd like Bochs to log debugger output.
409
# If you really don't want it, make it /dev/null or '-'. :^(
412
# debugger_log: ./debugger.out
413
#=======================================================================
414
#debugger_log: /dev/null
415
#debugger_log: debugger.out
418
#=======================================================================
419
# COM1, COM2, COM3, COM4:
420
# This defines a serial port (UART type 16550A). In the 'term' you can specify
421
# a device to use as com1. This can be a real serial line, or a pty. To use
422
# a pty (under X/Unix), create two windows (xterms, usually). One of them will
423
# run bochs, and the other will act as com1. Find out the tty the com1
424
# window using the `tty' command, and use that as the `dev' parameter.
425
# Then do `sleep 1000000' in the com1 window to keep the shell from
426
# messing with things, and run bochs in the other window. Serial I/O to
427
# com1 (port 0x3f8) will all go to the other window.
428
# Other serial modes are 'null' (no input/output), 'file' (output to a file
429
# specified as the 'dev' parameter), 'raw' (use the real serial port - under
430
# construction for win32), 'mouse' (standard serial mouse - requires
431
# mouse option setting 'type=serial' or 'type=serial_wheel') and 'socket'
432
# (connect a networking socket).
435
# com1: enabled=1, mode=null
436
# com1: enabled=1, mode=mouse
437
# com2: enabled=1, mode=file, dev=serial.out
438
# com3: enabled=1, mode=raw, dev=com1
439
# com3: enabled=1, mode=socket, dev=localhost:8888
440
#=======================================================================
441
#com1: enabled=1, mode=term, dev=/dev/ttyp9
444
#=======================================================================
445
# PARPORT1, PARPORT2:
446
# This defines a parallel (printer) port. When turned on and an output file is
447
# defined the emulated printer port sends characters printed by the guest OS
448
# into the output file. On some platforms a device filename can be used to
449
# send the data to the real parallel port (e.g. "/dev/lp0" on Linux, "lpt1" on
453
# parport1: enabled=1, file="parport.out"
454
# parport2: enabled=1, file="/dev/lp0"
455
# parport1: enabled=0
456
#=======================================================================
457
parport1: enabled=1, file="parport.out"
459
#=======================================================================
461
# This defines the SB16 sound emulation. It can have several of the
462
# following properties.
463
# All properties are in the format sb16: property=value
464
# midi: The filename is where the midi data is sent. This can be a
465
# device or just a file if you want to record the midi data.
468
# 1=output to device (system dependent. midi denotes the device driver)
469
# 2=SMF file output, including headers
470
# 3=output the midi data stream to the file (no midi headers and no
471
# delta times, just command and data bytes)
472
# wave: This is the device/file where wave output is stored
475
# 1=output to device (system dependent. wave denotes the device driver)
476
# 2=VOC file output, incl. headers
477
# 3=output the raw wave stream to the file
478
# log: The file to write the sb16 emulator messages to.
481
# 1=resource changes, midi program and bank changes
484
# 4=all errors plus all port accesses
485
# 5=all errors and port accesses plus a lot of extra info
487
# microseconds per second for a DMA cycle. Make it smaller to fix
488
# non-continuous sound. 750000 is usually a good value. This needs a
489
# reasonably correct setting for the IPS parameter of the CPU option.
491
# For an example look at the next line:
492
#=======================================================================
494
#sb16: midimode=1, midi=/dev/midi00, wavemode=1, wave=/dev/dsp, loglevel=2, log=sb16.log, dmatimer=600000
496
#=======================================================================
497
# VGA_UPDATE_INTERVAL:
498
# Video memory is scanned for updates and screen updated every so many
499
# virtual seconds. The default is 40000, about 25Hz. Keep in mind that
500
# you must tweak the 'cpu: ips=N' directive to be as close to the number
501
# of emulated instructions-per-second your workstation can do, for this
505
# vga_update_interval: 250000
506
#=======================================================================
507
vga_update_interval: 300000
509
# using for Winstone '98 tests
510
#vga_update_interval: 100000
512
#=======================================================================
513
# KEYBOARD_SERIAL_DELAY:
514
# Approximate time in microseconds that it takes one character to
515
# be transfered from the keyboard to controller over the serial path.
517
# keyboard_serial_delay: 200
518
#=======================================================================
519
keyboard_serial_delay: 250
521
#=======================================================================
522
# KEYBOARD_PASTE_DELAY:
523
# Approximate time in microseconds between attempts to paste
524
# characters to the keyboard controller. This leaves time for the
525
# guest os to deal with the flow of characters. The ideal setting
526
# depends on how your operating system processes characters. The
527
# default of 100000 usec (.1 seconds) was chosen because it works
528
# consistently in Windows.
530
# If your OS is losing characters during a paste, increase the paste
531
# delay until it stops losing characters.
534
# keyboard_paste_delay: 100000
535
#=======================================================================
536
keyboard_paste_delay: 100000
538
#=======================================================================
540
# This option prevents Bochs from creating mouse "events" unless a mouse
541
# is enabled. The hardware emulation itself is not disabled by this.
542
# You can turn the mouse on by setting enabled to 1, or turn it off by
543
# setting enabled to 0. Unless you have a particular reason for enabling
544
# the mouse by default, it is recommended that you leave it off.
545
# You can also toggle the mouse usage at runtime (control key + middle
546
# mouse button on X11, SDL, wxWidgets and Win32).
547
# With the mouse type option you can select the type of mouse to emulate.
548
# The default value is 'ps2'. The other choices are 'imps2' (wheel mouse
549
# on PS/2), 'serial', 'serial_wheel' (one com port requires setting
550
# 'mode=mouse') and 'usb' (3-button mouse - one of the USB ports must be
551
# connected with the 'mouse' device - requires PCI and USB support).
555
# mouse: enabled=1, type=imps2
556
# mouse: enabled=1, type=serial
558
#=======================================================================
561
#=======================================================================
562
# private_colormap: Request that the GUI create and use it's own
563
# non-shared colormap. This colormap will be used
564
# when in the bochs window. If not enabled, a
565
# shared colormap scheme may be used. Not implemented
569
# private_colormap: enabled=1
570
# private_colormap: enabled=0
571
#=======================================================================
572
private_colormap: enabled=0
574
#=======================================================================
575
# fullscreen: ONLY IMPLEMENTED ON AMIGA
576
# Request that Bochs occupy the entire screen instead of a
580
# fullscreen: enabled=0
581
# fullscreen: enabled=1
582
#=======================================================================
583
#fullscreen: enabled=0
584
#screenmode: name="sample"
586
#=======================================================================
587
# ne2k: NE2000 compatible ethernet adapter
590
# ne2k: ioaddr=IOADDR, irq=IRQ, mac=MACADDR, ethmod=MODULE, ethdev=DEVICE, script=SCRIPT
592
# ioaddr, irq: You probably won't need to change ioaddr and irq, unless there
595
# mac: The MAC address MUST NOT match the address of any machine on the net.
596
# Also, the first byte must be an even number (bit 0 set means a multicast
597
# address), and you cannot use ff:ff:ff:ff:ff:ff because that's the broadcast
598
# address. For the ethertap module, you must use fe:fd:00:00:00:01. There may
599
# be other restrictions too. To be safe, just use the b0:c4... address.
601
# ethdev: The ethdev value is the name of the network interface on your host
602
# platform. On UNIX machines, you can get the name by running ifconfig. On
603
# Windows machines, you must run niclist to get the name of the ethdev.
604
# Niclist source code is in misc/niclist.c and it is included in Windows
607
# script: The script value is optional, and is the name of a script that
608
# is executed after bochs initialize the network interface. You can use
609
# this script to configure this network interface, or enable masquerading.
610
# This is mainly useful for the tun/tap devices that only exist during
611
# Bochs execution. The network interface name is supplied to the script
614
# If you don't want to make connections to any physical networks,
615
# you can use the following 'ethmod's to simulate a virtual network.
616
# null: All packets are discarded, but logged to a few files.
617
# arpback: ARP is simulated. Disabled by default.
618
# vde: Virtual Distributed Ethernet
619
# vnet: ARP, ICMP-echo(ping), DHCP and read/write TFTP are simulated.
620
# The virtual host uses 192.168.10.1.
621
# DHCP assigns 192.168.10.2 to the guest.
622
# TFTP uses the ethdev value for the root directory and doesn't
625
#=======================================================================
626
# ne2k: ioaddr=0x240, irq=9, mac=fe:fd:00:00:00:01, ethmod=fbsd, ethdev=en0 #macosx
627
# ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:00, ethmod=fbsd, ethdev=xl0
628
# ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:00, ethmod=linux, ethdev=eth0
629
# ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:01, ethmod=win32, ethdev=MYCARD
630
# ne2k: ioaddr=0x240, irq=9, mac=fe:fd:00:00:00:01, ethmod=tap, ethdev=tap0
631
# ne2k: ioaddr=0x240, irq=9, mac=fe:fd:00:00:00:01, ethmod=tuntap, ethdev=/dev/net/tun0, script=./tunconfig
632
# ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:01, ethmod=null, ethdev=eth0
633
# ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:01, ethmod=vde, ethdev="/tmp/vde.ctl"
634
# ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:01, ethmod=vnet, ethdev="c:/temp"
635
pnic: mac=fe:fd:00:00:00:01, ethmod=tuntap, ethdev=/dev/net/tun:tap0
636
#ne2k: ioaddr=0x240, irq=9, mac=fe:fd:00:00:00:01, ethmod=tuntap, ethdev=/dev/net/tun:tap0
638
#=======================================================================
640
# This enables a remap of a physical localized keyboard to a
641
# virtualized us keyboard, as the PC architecture expects.
642
# If enabled, the keymap file must be specified.
645
# keyboard_mapping: enabled=1, map=gui/keymaps/x11-pc-de.map
646
#=======================================================================
647
keyboard_mapping: enabled=0, map=
649
#=======================================================================
651
# Type of keyboard return by a "identify keyboard" command to the
652
# keyboard controler. It must be one of "xt", "at" or "mf".
653
# Defaults to "mf". It should be ok for almost everybody. A known
654
# exception is french macs, that do have a "at"-like keyboard.
658
#=======================================================================
661
#=======================================================================
663
# This defines the keyboard shortcut to be sent when you press the "user"
664
# button in the headerbar. The shortcut string is a combination of maximum
665
# 3 key names (listed below) separated with a '-' character. The old-style
666
# syntax (without the '-') still works for the key combinations supported
669
# "alt", "bksl", "bksp", "ctrl", "del", "down", "end", "enter", "esc",
670
# "f1", ... "f12", "home", "ins", "left", "menu", "minus", "pgdwn", "pgup",
671
# "plus", "right", "shift", "space", "tab", "up", and "win".
674
# user_shortcut: keys=ctrl-alt-del
675
#=======================================================================
676
user_shortcut: keys=ctrl-alt-del
678
#=======================================================================
680
# This option controls the presence of the i440FX PCI chipset. You can
681
# also specify the devices connected to PCI slots. Up to 5 slots are
682
# available now. These devices are currently supported: ne2k, pcivga,
683
# pcidev and pcipnic. If Bochs is compiled with Cirrus SVGA support
684
# you'll have the additional choice 'cirrus'.
687
# i440fxsupport: enabled=1, slot1=pcivga, slot2=ne2k
688
#=======================================================================
689
i440fxsupport: enabled=1, slot1=pcipnic
690
#i440fxsupport: enabled=1, slot1=ne2k
692
#=======================================================================
694
# This option controls the presence of the USB root hub which is a part
695
# of the i440FX PCI chipset. With the portX option you can connect devices
696
# to the hub (currently supported: 'mouse' and 'keypad'). If you connect
697
# the mouse to one of the ports and use the mouse option 'type=usb' you'll
698
# have a 3-button USB mouse.
701
# usb1: enabled=1, port1=mouse, port2=keypad
702
#=======================================================================
705
#=======================================================================
707
# This defines image file that can be loaded into the CMOS RAM at startup.
708
# The rtc_init parameter controls whether initialize the RTC with values stored
709
# in the image. By default the time0 argument given to the clock option is used.
710
# With 'rtc_init=image' the image is the source for the initial time.
713
# cmosimage: file=cmos.img, rtc_init=image
714
#=======================================================================
715
#cmosimage: file=cmos.img, rtc_init=time0
717
#=======================================================================
719
#=======================================================================
720
magic_break: enabled=1
721
#load32bitOSImage: os=nullkernel, path=../kernel.img, iolog=../vga_io.log
722
#load32bitOSImage: os=linux, path=../linux.img, iolog=../vga_io.log, initrd=../initrd.img
723
#text_snapshot_check: enable
725
#-------------------------
726
# PCI host device mapping
727
#-------------------------
728
#pcidev: vendor=0x1234, device=0x5678
730
#=======================================================================
732
# Enable GDB stub. See user documentation for details.
733
# Default value is enabled=0.
734
#=======================================================================
735
#gdbstub: enabled=0, port=1234, text_base=0, data_base=0, bss_base=0
737
#=======================================================================
739
# The IPS directive is DEPRECATED. Use the parameter IPS of the CPU
741
#=======================================================================
744
#=======================================================================
745
# for Macintosh, use the style of pathnames in the following
748
# vgaromimage: :bios:VGABIOS-elpin-2.40
749
# romimage: file=:bios:BIOS-bochs-latest, address=0xf0000
750
# floppya: 1_44=[fd:], status=inserted
751
#=======================================================================