1
<!-- XML EXCHANGE TABLE MODEL DECLARATION MODULE -->
3
<!-- This set of declarations defines the XML version of the Exchange
4
Table Model as of the date shown in the Formal Public Identifier
7
This set of declarations may be referred to using a public external
8
entity declaration and reference as shown in the following three
12
PUBLIC "-//OASIS//DTD XML Exchange Table Model 19990315//EN">
15
If various parameter entities used within this set of declarations
16
are to be given non-default values, the appropriate declarations
17
should be given before calling in this package (i.e., before the
18
"%calstblx;" reference).
21
<!-- The motivation for this XML version of the Exchange Table Model
22
is simply to create an XML version of the SGML Exchange Table
23
Model. By design, no effort has been made to "improve" the model.
25
This XML version incorporates the logical bare minimum changes
26
necessary to make the Exchange Table Model a valid XML DTD.
29
<!-- The XML version of the Exchange Table Model differs from
30
the SGML version in the following ways:
32
The following parameter entities have been removed:
34
- tbl.table.excep, tbl.hdft.excep, tbl.row.excep, tbl.entry.excep
35
There are no exceptions in XML. The following normative statement
36
is made in lieu of exceptions: the exchange table model explicitly
37
forbids a table from occurring within another table. If the
38
content model of an entry includes a table element, then this
39
cannot be enforced by the DTD, but it is a deviation from the
40
exchange table model to include a table within a table.
42
- tbl.hdft.name, tbl.hdft.mdl, tbl.hdft.excep, tbl.hdft.att
43
The motivation for these elements was to change the table
44
header/footer elements. Since XML does not allow element declarations
45
to contain name groups, and the exchange table model does not
46
allow a table to contain footers, the continued presence of these
47
attributes seems unnecessary.
49
The following parameter entity has been added:
52
This entity parameterizes the attributes on thead. It replaces
53
the tbl.hdft.att parameter entity.
55
Other miscellaneous changes:
57
- Tag ommission indicators have been removed
58
- Comments have been removed from declarations
59
- NUMBER attributes have been changed to NMTOKEN
60
- NUTOKEN attributes have been to changed to NMTOKEN
61
- Removed the grouping characters around the content model
62
parameter entry for the 'entry' element. This is necessary
63
so that an entry can contain #PCDATA and be defined as an
64
optional, repeatable OR group beginning with #PCDATA.
67
<!-- This entity includes a set of element and attribute declarations
68
that partially defines the Exchange table model. However, the model
69
is not well-defined without the accompanying natural language
70
description of the semantics (meanings) of these various elements,
71
attributes, and attribute values. The semantic writeup, also available
72
from SGML Open, should be used in conjunction with this entity.
75
<!-- In order to use the Exchange table model, various parameter entity
76
declarations are required. A brief description is as follows:
78
ENTITY NAME WHERE USED WHAT IT IS
80
%yesorno In ATTLIST of: An attribute declared value
81
almost all elements for a "boolean" attribute
83
%paracon In content model of: The "text" (logical content)
84
<entry> of the model group for <entry>
86
%titles In content model of: The "title" part of the model
87
table element group for the table element
89
%tbl.table.name In declaration of: The name of the "table"
92
%tbl.table-titles.mdl In content model of: The model group for the title
93
table elements part of the content model for
96
%tbl.table.mdl In content model of: The model group for the content
97
table elements model for table element,
98
often (and by default) defined
99
in terms of %tbl.table-titles.mdl
102
%tbl.table.att In ATTLIST of: Additional attributes on the
103
table element table element
105
%bodyatt In ATTLIST of: Additional attributes on the
106
table element table element (for backward
107
compatibility with the SGML
110
%tbl.tgroup.mdl In content model of: The model group for the content
111
<tgroup> model for <tgroup>
113
%tbl.tgroup.att In ATTLIST of: Additional attributes on the
114
<tgroup> <tgroup> element
116
%tbl.thead.att In ATTLIST of: Additional attributes on the
117
<thead> <thead> element
119
%tbl.tbody.att In ATTLIST of: Additional attributes on the
120
<tbody> <tbody> element
122
%tbl.colspec.att In ATTLIST of: Additional attributes on the
123
<colspec> <colspec> element
125
%tbl.row.mdl In content model of: The model group for the content
126
<row> model for <row>
128
%tbl.row.att In ATTLIST of: Additional attributes on the
131
%tbl.entry.mdl In content model of: The model group for the content
132
<entry> model for <entry>
134
%tbl.entry.att In ATTLIST of: Additional attributes on the
135
<entry> <entry> element
137
This set of declarations will use the default definitions shown below
138
for any of these parameter entities that are not declared before this
139
set of declarations is referenced.
142
<!-- These definitions are not directly related to the table model, but are
143
used in the default CALS table model and may be defined elsewhere (and
144
prior to the inclusion of this table module) in the referencing DTD. -->
146
<!ENTITY % yesorno 'NMTOKEN'> <!-- no if zero(s), yes if any other value -->
147
<!ENTITY % titles 'title?'>
148
<!ENTITY % pcd "#PCDATA">
149
<!ENTITY % paracon '%pcd;'> <!-- default for use in entry content -->
152
The parameter entities as defined below change and simplify the CALS table
153
model as published (as part of the Example DTD) in MIL-HDBK-28001. The
154
resulting simplified DTD has support from the SGML Open vendors and is
155
therefore more interoperable among different systems.
157
These following declarations provide the Exchange default definitions
158
for these entities. However, these entities can be redefined (by giving
159
the appropriate parameter entity declaration(s) prior to the reference
160
to this Table Model declaration set entity) to fit the needs of the
163
Note, however, that changes may have significant effect on the ability to
164
interchange table information. These changes may manifest themselves
165
in useability, presentation, and possible structure information degradation.
168
<!ENTITY % tbl.table.name "table">
169
<!ENTITY % tbl.table-titles.mdl "%titles;,">
170
<!ENTITY % tbl.table-main.mdl "tgroup+">
171
<!ENTITY % tbl.table.mdl "%tbl.table-titles.mdl; %tbl.table-main.mdl;">
172
<!ENTITY % tbl.table.att "
173
pgwide %yesorno; #IMPLIED ">
174
<!ENTITY % bodyatt "">
175
<!ENTITY % tbl.tgroup.mdl "colspec*,thead?,tbody">
176
<!ENTITY % tbl.tgroup.att "">
177
<!ENTITY % tbl.thead.att "">
178
<!ENTITY % tbl.tbody.att "">
179
<!ENTITY % tbl.colspec.att "">
180
<!ENTITY % tbl.row.mdl "entry+">
181
<!ENTITY % tbl.row.att "">
182
<!ENTITY % tbl.entry.mdl "(%paracon;)*">
183
<!ENTITY % tbl.entry.att "">
185
<!-- ===== Element and attribute declarations follow. ===== -->
188
Default declarations previously defined in this entity and
189
referenced below include:
190
ENTITY % tbl.table.name "table"
191
ENTITY % tbl.table-titles.mdl "%titles;,"
192
ENTITY % tbl.table.mdl "%tbl.table-titles; tgroup+"
193
ENTITY % tbl.table.att "
194
pgwide %yesorno; #IMPLIED "
197
<!ELEMENT %tbl.table.name; (%tbl.table.mdl;)>
199
<!ATTLIST %tbl.table.name;
200
frame (top|bottom|topbot|all|sides|none) #IMPLIED
201
colsep %yesorno; #IMPLIED
202
rowsep %yesorno; #IMPLIED
208
Default declarations previously defined in this entity and
209
referenced below include:
210
ENTITY % tbl.tgroup.mdl "colspec*,thead?,tbody"
211
ENTITY % tbl.tgroup.att ""
214
<!ELEMENT tgroup (%tbl.tgroup.mdl;) >
217
cols NMTOKEN #REQUIRED
218
colsep %yesorno; #IMPLIED
219
rowsep %yesorno; #IMPLIED
220
align (left|right|center|justify|char) #IMPLIED
225
Default declarations previously defined in this entity and
226
referenced below include:
227
ENTITY % tbl.colspec.att ""
230
<!ELEMENT colspec EMPTY >
233
colnum NMTOKEN #IMPLIED
234
colname NMTOKEN #IMPLIED
235
colwidth CDATA #IMPLIED
236
colsep %yesorno; #IMPLIED
237
rowsep %yesorno; #IMPLIED
238
align (left|right|center|justify|char) #IMPLIED
240
charoff NMTOKEN #IMPLIED
245
Default declarations previously defined in this entity and
246
referenced below include:
247
ENTITY % tbl.thead.att ""
250
<!ELEMENT thead (row+)>
253
valign (top|middle|bottom) #IMPLIED
258
Default declarations previously defined in this entity and
259
referenced below include:
260
ENTITY % tbl.tbody.att ""
263
<!ELEMENT tbody (row+)>
266
valign (top|middle|bottom) #IMPLIED
271
Default declarations previously defined in this entity and
272
referenced below include:
273
ENTITY % tbl.row.mdl "entry+"
274
ENTITY % tbl.row.att ""
277
<!ELEMENT row (%tbl.row.mdl;)>
280
rowsep %yesorno; #IMPLIED
281
valign (top|middle|bottom) #IMPLIED
287
Default declarations previously defined in this entity and
288
referenced below include:
289
ENTITY % paracon "#PCDATA"
290
ENTITY % tbl.entry.mdl "(%paracon;)*"
291
ENTITY % tbl.entry.att ""
294
<!ELEMENT entry %tbl.entry.mdl;>
297
colname NMTOKEN #IMPLIED
298
namest NMTOKEN #IMPLIED
299
nameend NMTOKEN #IMPLIED
300
morerows NMTOKEN #IMPLIED
301
colsep %yesorno; #IMPLIED
302
rowsep %yesorno; #IMPLIED
303
align (left|right|center|justify|char) #IMPLIED
305
charoff NMTOKEN #IMPLIED
306
valign (top|middle|bottom) #IMPLIED
added
removed
doc/tools/dtd/docbook41/soextblx.dtd
