← Back to branch summary

~toykeeper/flashlight-firmware/fsm

« back to all changes in this revision

Viewing changes to ToyKeeper/spaghetti-monster/anduril/cfg-fw3x-lume1.h

  • Committer: Selene ToyKeeper
  • Date: 2023-11-04 15:09:10 UTC
  • mfrom: (483.1.175 anduril2)
  • Revision ID: bzr@toykeeper.net-20231104150910-ddd3afw4nhfvof2l
merged anduril2 branch -> fsm, with *years* of changes
(this also means this code is now Anduril 2 instead of Anduril 1)

Show diffs side-by-side

added added

removed removed

Lines of Context:
ToyKeeper/spaghetti-monster/anduril/cfg-fw3x-lume1.h
1
 
/* lume1 for FW3x config options for Anduril
 
1
// lume1 for FW3x config options for Anduril
 
2
// Copyright (C) 2020-2023 LoneOceans, Selene ToyKeeper
 
3
// SPDX-License-Identifier: GPL-3.0-or-later
 
4
#pragma once
 
5
 
 
6
/*
2
7
 * Constant current Buck-Boost + FET driver
3
8
 * For more information: www.loneoceans.com/labs/
4
9
 * Datasheets:
6
11
 * - 85: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2586-AVR-8-bit-Microcontroller-ATtiny25-ATtiny45-ATtiny85_Datasheet.pdf
7
12
 */
8
13
 
 
14
#define MODEL_NUMBER "0314"
9
15
#include "hwdef-fw3x-lume1.h"
10
16
// ATTINY: 1634
11
17
 
23
29
#ifdef USE_INDICATOR_LED_WHILE_RAMPING
24
30
#undef USE_INDICATOR_LED_WHILE_RAMPING
25
31
#endif
26
 
#define RGB_LED_OFF_DEFAULT 0x18  // low, voltage
27
 
#define RGB_LED_LOCKOUT_DEFAULT 0x37  // blinking, rainbow
28
 
 
29
 
// enable blinking aux LEDs
30
 
#define TICK_DURING_STANDBY
31
 
#define STANDBY_TICK_SPEED 3  // every 0.128 s
32
 
//#define STANDBY_TICK_SPEED 4  // every 0.256 s
33
 
//#define STANDBY_TICK_SPEED 5  // every 0.512 s
34
32
 
35
33
// ../../bin/level_calc.py cube 1 149 7135 0 0.5 1000, with 0 appended to the end.
36
34
// for FET PWM (PWM2), all values are 0, except for last value of 1023
37
35
// (with max_pwm set to 1023)
38
 
#define RAMP_LENGTH 150
 
36
#define RAMP_SIZE 150
39
37
//#define PWM1_LEVELS 0,0,0,0,1,1,1,1,2,2,2,3,3,4,4,5,5,6,7,7,8,9,10,11,12,13,14,15,16,17,19,20,22,23,25,26,28,30,32,34,36,38,40,42,45,47,49,52,55,58,60,63,66,70,73,76,80,83,87,91,94,98,102,107,111,115,120,124,129,134,139,144,150,155,160,166,172,178,184,190,196,203,209,216,223,230,237,244,252,259,267,275,283,291,299,308,316,325,334,343,353,362,372,382,392,402,412,423,433,444,455,466,478,489,501,513,525,538,550,563,576,589,602,616,630,644,658,672,687,701,716,731,747,762,778,794,810,827,844,861,878,895,913,930,948,967,985,1004,1023,0
40
38
#define PWM1_LEVELS 1,1,1,1,2,2,2,2,3,3,3,4,4,5,5,6,6,7,8,8,9,10,11,12,13,14,15,16,17,18,20,21,23,24,26,27,29,31,33,35,37,39,41,43,45,48,50,53,56,58,61,64,67,70,74,77,80,84,88,91,95,99,103,108,112,116,121,125,130,135,140,145,150,156,161,167,173,178,184,191,197,203,210,217,223,230,238,245,252,260,268,275,283,292,300,308,317,326,335,344,353,363,372,382,392,402,413,423,434,445,456,467,478,490,502,514,526,538,551,563,576,589,603,616,630,644,658,672,687,702,717,732,747,763,778,794,811,827,844,861,878,895,913,931,949,967,985,1004,1023,0
41
39
#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1023
66
64
#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL
67
65
#define RAMP_DISCRETE_STEPS 7
68
66
 
69
 
// Muggle mode: Goal from about ~10 lumens to about ~300+ lumens
70
 
// In this case, ramp number 99 is about 1A to the driver
71
 
#define MUGGLE_FLOOR RAMP_DISCRETE_FLOOR
72
 
#define MUGGLE_CEILING 99
 
67
#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
 
68
#define SIMPLE_UI_CEIL 120
 
69
#define SIMPLE_UI_STEPS 5
73
70
 
74
71
// slow down party strobe; this driver can't pulse for too short a time
75
72
#define PARTY_STROBE_ONTIME 4
76
73
 
77
 
// optional, makes initial turbo step-down faster so first peak isn't as hot
78
 
// FET mode can run very very hot, so be extra careful
79
 
//#define THERM_HARD_TURBO_DROP
80
 
 
81
74
// stop panicking at ~85% regulated power or ~750 lm
82
75
#define THERM_FASTER_LEVEL 140
83
76
 
84
77
#define THERM_CAL_OFFSET 0  // not needed due to external sensor
85
78
 
86
 
// easier access to thermal config mode, similar to Emisar, Noctigon
87
 
#define USE_TENCLICK_THERMAL_CONFIG
88
 
 
89
79
// can't reset the normal way because power is connected before the button
90
80
#define USE_SOFT_FACTORY_RESET
 
81