1
# This is the original manually generated Makefile. It may still be used
2
# to build the collector.
5
# gc.a - builds basic library
6
# c++ - adds C++ interface to library
7
# cords - adds cords (heavyweight strings) to library
8
# test - prints porting information, then builds basic version of gc.a,
9
# and runs some tests of collector and cords. Does not add cords or
10
# c++ interface to gc.a
11
# cord/de - builds dumb editor based on cords.
13
# ABI_FLAG should be the cc flag that specifies the ABI. On most
14
# platforms this will be the empty string. Possible values:
15
# +DD64 for 64-bit executable on HP/UX.
16
# -n32, -n64, -o32 for SGI/MIPS ABIs.
18
AS_ABI_FLAG=$(ABI_FLAG)
19
# ABI flag for assembler. On HP/UX this is +A64 for 64 bit
25
# The above doesn't work with gas, which doesn't run cpp.
26
# Define AS as `gcc -c -x assembler-with-cpp' instead.
28
# Redefining srcdir allows object code for the nonPCR version of the collector
29
# to be generated in different directories.
33
CFLAGS= -O -I$(srcdir)/include -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DNO_EXECUTE_PERMISSION -DSILENT -DALL_INTERIOR_POINTERS
35
# To build the parallel collector on Linux, add to the above:
36
# -DGC_LINUX_THREADS -DPARALLEL_MARK -DTHREAD_LOCAL_ALLOC
37
# To build the parallel collector in a static library on HP/UX,
39
# -DGC_HPUX_THREADS -DPARALLEL_MARK -DTHREAD_LOCAL_ALLOC -D_POSIX_C_SOURCE=199506L -mt
40
# To build the thread-safe collector on Tru64, add to the above:
41
# -pthread -DGC_OSF1_THREADS
43
# HOSTCC and HOSTCFLAGS are used to build executables that will be run as
44
# part of the build process, i.e. on the build machine. These will usually
45
# be the same as CC and CFLAGS, except in a cross-compilation environment.
46
# Note that HOSTCFLAGS should include any -D flags that affect thread support.
50
# For dynamic library builds, it may be necessary to add flags to generate
51
# PIC code, e.g. -fPIC on Linux.
53
# Setjmp_test may yield overly optimistic results when compiled
54
# without optimization.
56
# These define arguments influence the collector configuration:
57
# -DSILENT disables statistics printing, and improves performance.
58
# -DFIND_LEAK causes GC_find_leak to be initially set.
59
# This causes the collector to assume that all inaccessible
60
# objects should have been explicitly deallocated, and reports exceptions.
61
# Finalization and the test program are not usable in this mode.
62
# -DGC_SOLARIS_THREADS enables support for Solaris (thr_) threads.
63
# (Clients should also define GC_SOLARIS_THREADS and then include
64
# gc.h before performing thr_ or dl* or GC_ operations.)
65
# Must also define -D_REENTRANT.
66
# -DGC_SOLARIS_PTHREADS enables support for Solaris pthreads.
67
# (Internally this define GC_SOLARIS_THREADS as well.)
68
# -DGC_IRIX_THREADS enables support for Irix pthreads. See README.irix.
69
# -DGC_HPUX_THREADS enables support for HP/UX 11 pthreads.
70
# Also requires -D_REENTRANT or -D_POSIX_C_SOURCE=199506L. See README.hp.
71
# -DGC_LINUX_THREADS enables support for Xavier Leroy's Linux threads.
72
# see README.linux. -D_REENTRANT may also be required.
73
# -DGC_OSF1_THREADS enables support for Tru64 pthreads.
74
# -DGC_FREEBSD_THREADS enables support for FreeBSD pthreads.
75
# Appeared to run into some underlying thread problems.
76
# -DGC_DARWIN_THREADS enables support for Mac OS X pthreads.
77
# -DGC_AIX_THREADS enables support for IBM AIX threads.
78
# -DGC_DGUX386_THREADS enables support for DB/UX on I386 threads.
80
# -DGC_WIN32_THREADS enables support for win32 threads. That makes sense
81
# for this Makefile only under Cygwin.
82
# -DGC_THREADS should set the appropriate one of the above macros.
83
# It assumes pthreads for Solaris.
84
# -DALL_INTERIOR_POINTERS allows all pointers to the interior
85
# of objects to be recognized. (See gc_priv.h for consequences.)
86
# Alternatively, GC_all_interior_pointers can be set at process
87
# initialization time.
88
# -DSMALL_CONFIG tries to tune the collector for small heap sizes,
89
# usually causing it to use less space in such situations.
90
# Incremental collection no longer works in this case.
91
# -DLARGE_CONFIG tunes the collector for unusually large heaps.
92
# Necessary for heaps larger than about 500 MB on most machines.
93
# Recommended for heaps larger than about 64 MB.
94
# -DDONT_ADD_BYTE_AT_END is meaningful only with -DALL_INTERIOR_POINTERS or
95
# GC_all_interior_pointers = 1. Normally -DALL_INTERIOR_POINTERS
96
# causes all objects to be padded so that pointers just past the end of
97
# an object can be recognized. This can be expensive. (The padding
98
# is normally more than one byte due to alignment constraints.)
99
# -DDONT_ADD_BYTE_AT_END disables the padding.
100
# -DNO_SIGNALS does not disable signals during critical parts of
101
# the GC process. This is no less correct than many malloc
102
# implementations, and it sometimes has a significant performance
103
# impact. However, it is dangerous for many not-quite-ANSI C
104
# programs that call things like printf in asynchronous signal handlers.
105
# This is on by default. Turning it off has not been extensively tested with
106
# compilers that reorder stores. It should have been.
107
# -DNO_EXECUTE_PERMISSION may cause some or all of the heap to not
108
# have execute permission, i.e. it may be impossible to execute
109
# code from the heap. Currently this only affects the incremental
110
# collector on UNIX machines. It may greatly improve its performance,
111
# since this may avoid some expensive cache synchronization.
112
# -DGC_NO_OPERATOR_NEW_ARRAY declares that the C++ compiler does not support
113
# the new syntax "operator new[]" for allocating and deleting arrays.
114
# See gc_cpp.h for details. No effect on the C part of the collector.
115
# This is defined implicitly in a few environments. Must also be defined
116
# by clients that use gc_cpp.h.
117
# -DREDIRECT_MALLOC=X causes malloc to be defined as alias for X.
118
# Unless the following macros are defined, realloc is also redirected
119
# to GC_realloc, and free is redirected to GC_free.
120
# Calloc and strdup are redefined in terms of the new malloc. X should
121
# be either GC_malloc or GC_malloc_uncollectable, or
122
# GC_debug_malloc_replacement. (The latter invokes GC_debug_malloc
123
# with dummy source location information, but still results in
124
# properly remembered call stacks on Linux/X86 and Solaris/SPARC.
125
# It requires that the following two macros also be used.)
126
# The former is occasionally useful for working around leaks in code
127
# you don't want to (or can't) look at. It may not work for
128
# existing code, but it often does. Neither works on all platforms,
129
# since some ports use malloc or calloc to obtain system memory.
130
# (Probably works for UNIX, and win32.) If you build with DBG_HDRS_ALL,
131
# you should only use GC_debug_malloc_replacement as a malloc
133
# -DREDIRECT_REALLOC=X causes GC_realloc to be redirected to X.
134
# The canonical use is -DREDIRECT_REALLOC=GC_debug_realloc_replacement,
135
# together with -DREDIRECT_MALLOC=GC_debug_malloc_replacement to
136
# generate leak reports with call stacks for both malloc and realloc.
137
# This also requires the following:
138
# -DREDIRECT_FREE=X causes free to be redirected to X. The
139
# canonical use is -DREDIRECT_FREE=GC_debug_free.
140
# -DIGNORE_FREE turns calls to free into a noop. Only useful with
142
# -DNO_DEBUGGING removes GC_dump and the debugging routines it calls.
143
# Reduces code size slightly at the expense of debuggability.
144
# -DJAVA_FINALIZATION makes it somewhat safer to finalize objects out of
145
# order by specifying a nonstandard finalization mark procedure (see
146
# finalize.c). Objects reachable from finalizable objects will be marked
147
# in a sepearte postpass, and hence their memory won't be reclaimed.
148
# Not recommended unless you are implementing a language that specifies
149
# these semantics. Since 5.0, determines only only the initial value
150
# of GC_java_finalization variable.
151
# -DFINALIZE_ON_DEMAND causes finalizers to be run only in response
152
# to explicit GC_invoke_finalizers() calls.
153
# In 5.0 this became runtime adjustable, and this only determines the
154
# initial value of GC_finalize_on_demand.
155
# -DATOMIC_UNCOLLECTABLE includes code for GC_malloc_atomic_uncollectable.
156
# This is useful if either the vendor malloc implementation is poor,
157
# or if REDIRECT_MALLOC is used.
158
# -DHBLKSIZE=ddd, where ddd is a power of 2 between 512 and 16384, explicitly
159
# sets the heap block size. Each heap block is devoted to a single size and
160
# kind of object. For the incremental collector it makes sense to match
161
# the most likely page size. Otherwise large values result in more
162
# fragmentation, but generally better performance for large heaps.
163
# -DUSE_MMAP use MMAP instead of sbrk to get new memory.
164
# Works for Solaris and Irix.
165
# -DUSE_MUNMAP causes memory to be returned to the OS under the right
166
# circumstances. This currently disables VM-based incremental collection.
167
# This is currently experimental, and works only under some Unix,
168
# Linux and Windows versions.
169
# -DMMAP_STACKS (for Solaris threads) Use mmap from /dev/zero rather than
170
# GC_scratch_alloc() to get stack memory.
171
# -DPRINT_BLACK_LIST Whenever a black list entry is added, i.e. whenever
172
# the garbage collector detects a value that looks almost, but not quite,
173
# like a pointer, print both the address containing the value, and the
174
# value of the near-bogus-pointer. Can be used to identifiy regions of
175
# memory that are likely to contribute misidentified pointers.
176
# -DKEEP_BACK_PTRS Add code to save back pointers in debugging headers
177
# for objects allocated with the debugging allocator. If all objects
178
# through GC_MALLOC with GC_DEBUG defined, this allows the client
179
# to determine how particular or randomly chosen objects are reachable
180
# for debugging/profiling purposes. The gc_backptr.h interface is
181
# implemented only if this is defined.
182
# -DGC_ASSERTIONS Enable some internal GC assertion checking. Currently
183
# this facility is only used in a few places. It is intended primarily
184
# for debugging of the garbage collector itself, but could also
185
# -DDBG_HDRS_ALL Make sure that all objects have debug headers. Increases
186
# the reliability (from 99.9999% to 100% mod. bugs) of some of the debugging
187
# code (especially KEEP_BACK_PTRS). Makes -DSHORT_DBG_HDRS possible.
188
# Assumes that all client allocation is done through debugging
190
# -DSHORT_DBG_HDRS Assume that all objects have debug headers. Shorten
191
# the headers to minimize object size, at the expense of checking for
192
# writes past the end of an object. This is intended for environments
193
# in which most client code is written in a "safe" language, such as
194
# Scheme or Java. Assumes that all client allocation is done using
195
# the GC_debug_ functions, or through the macros that expand to these,
196
# or by redirecting malloc to GC_debug_malloc_replacement.
197
# (Also eliminates the field for the requested object size.)
198
# occasionally be useful for debugging of client code. Slows down the
199
# collector somewhat, but not drastically.
200
# -DSAVE_CALL_COUNT=<n> Set the number of call frames saved with objects
201
# allocated through the debugging interface. Affects the amount of
202
# information generated in leak reports. Only matters on platforms
203
# on which we can quickly generate call stacks, currently Linux/(X86 & SPARC)
204
# and Solaris/SPARC and platforms that provide execinfo.h.
205
# Default is zero. On X86, client
206
# code should NOT be compiled with -fomit-frame-pointer.
207
# -DSAVE_CALL_NARGS=<n> Set the number of functions arguments to be
208
# saved with each call frame. Default is zero. Ignored if we
209
# don't know how to retrieve arguments on the platform.
210
# -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly
211
# altered stubborn objects, at substantial performance cost.
212
# Use only for debugging of the incremental collector.
213
# -DGC_GCJ_SUPPORT includes support for gcj (and possibly other systems
214
# that include a pointer to a type descriptor in each allocated object).
215
# Building this way requires an ANSI C compiler.
216
# -DUSE_I686_PREFETCH causes the collector to issue Pentium III style
217
# prefetch instructions. No effect except on X86 Linux platforms.
218
# Assumes a very recent gcc-compatible compiler and assembler.
219
# (Gas prefetcht0 support was added around May 1999.)
220
# Empirically the code appears to still run correctly on Pentium II
221
# processors, though with no performance benefit. May not run on other
222
# X86 processors? In some cases this improves performance by
224
# -DUSE_3DNOW_PREFETCH causes the collector to issue AMD 3DNow style
225
# prefetch instructions. Same restrictions as USE_I686_PREFETCH.
226
# Minimally tested. Didn't appear to be an obvious win on a K6-2/500.
227
# -DUSE_PPC_PREFETCH causes the collector to issue PowerPC style
228
# prefetch instructions. No effect except on PowerPC OS X platforms.
229
# Performance impact untested.
230
# -DGC_USE_LD_WRAP in combination with the old flags listed in README.linux
231
# causes the collector some system and pthread calls in a more transparent
232
# fashion than the usual macro-based approach. Requires GNU ld, and
233
# currently probably works only with Linux.
234
# -DTHREAD_LOCAL_ALLOC defines GC_local_malloc(), GC_local_malloc_atomic()
235
# and GC_local_gcj_malloc(). Needed for gc_gcj.h interface. These allocate
236
# in a way that usually does not involve acquisition of a global lock.
237
# Currently works only on platforms such as Linux which use pthread_support.c.
238
# Recommended for multiprocessors.
239
# -DUSE_COMPILER_TLS causes thread local allocation to use compiler-supported
240
# "__thread" thread-local variables. This is the default in HP/UX. It
241
# may help performance on recent Linux installations. (It failed for
242
# me on RedHat 8, but appears to work on RedHat 9.)
243
# -DPARALLEL_MARK allows the marker to run in multiple threads. Recommended
244
# for multiprocessors. Currently requires Linux on X86 or IA64, though
245
# support for other Posix platforms should be fairly easy to add,
246
# if the thread implementation is otherwise supported.
247
# -DNO_GETENV prevents the collector from looking at environment variables.
248
# These may otherwise alter its configuration, or turn off GC altogether.
249
# I don't know of a reason to disable this, except possibly if the
250
# resulting process runs as a privileged user?
251
# -DUSE_GLOBAL_ALLOC. Win32 only. Use GlobalAlloc instead of
252
# VirtualAlloc to allocate the heap. May be needed to work around
253
# a Windows NT/2000 issue. Incompatible with USE_MUNMAP.
254
# See README.win32 for details.
255
# -DMAKE_BACK_GRAPH. Enable GC_PRINT_BACK_HEIGHT environment variable.
256
# See README.environment for details. Experimental. Limited platform
257
# support. Implies DBG_HDRS_ALL. All allocation should be done using
258
# the debug interface.
259
# -DSTUBBORN_ALLOC allows allocation of "hard to change" objects, and thus
260
# makes incremental collection easier. Was enabled by default until 6.0.
261
# Rarely used, to my knowledge.
262
# -DHANDLE_FORK attempts to make GC_malloc() work in a child process fork()ed
263
# from a multithreaded parent. Currently only supported by pthread_support.c.
264
# (Similar code should work on Solaris or Irix, but it hasn't been tried.)
265
# -DTEST_WITH_SYSTEM_MALLOC causes gctest to allocate (and leak) large chunks
266
# of memory with the standard system malloc. This will cause the root
267
# set and collected heap to grow significantly if malloced memory is
268
# somehow getting traced by the collector. This has no impact on the
269
# generated library; it only affects the test.
270
# -DPOINTER_MASK=0x... causes candidate pointers to be ANDed with the
271
# given mask before being considered. If either this or the following
272
# macro is defined, it will be assumed that all pointers stored in
273
# the heap need to be processed this way. Stack and register pointers
274
# will be considered both with and without processing.
275
# These macros are normally needed only to support systems that use
276
# high-order pointer tags. EXPERIMENTAL.
277
# -DPOINTER_SHIFT=n causes the collector to left shift candidate pointers
278
# by the indicated amount before trying to interpret them. Applied
279
# after POINTER_MASK. EXPERIMENTAL. See also the preceding macro.
280
# -DDARWIN_DONT_PARSE_STACK Causes the Darwin port to discover thread
281
# stack bounds in the same way as other pthread ports, without trying to
282
# walk the frames onthe stack. This is recommended only as a fallback
283
# for applications that don't support proper stack unwinding.
291
OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o pthread_support.o pthread_stop_world.o darwin_stop_world.o typd_mlc.o ptr_chck.o mallocx.o solaris_pthreads.o gcj_mlc.o specific.o gc_dlopen.o backgraph.o win32_threads.o
293
CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c pthread_support.c pthread_stop_world.c darwin_stop_world.c typd_mlc.c ptr_chck.c mallocx.c solaris_pthreads.c gcj_mlc.c specific.c gc_dlopen.c backgraph.c win32_threads.c
295
CORD_SRCS= cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordtest.c include/cord.h include/ec.h include/private/cord_pos.h cord/de_win.c cord/de_win.h cord/de_cmds.h cord/de_win.ICO cord/de_win.RC
297
CORD_OBJS= cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o
299
SRCS= $(CSRCS) mips_sgi_mach_dep.s rs6000_mach_dep.s alpha_mach_dep.S \
300
sparc_mach_dep.S include/gc.h include/gc_typed.h \
301
include/private/gc_hdrs.h include/private/gc_priv.h \
302
include/private/gcconfig.h include/private/gc_pmark.h \
303
include/gc_inl.h include/gc_inline.h include/gc_mark.h \
304
threadlibs.c if_mach.c if_not_there.c gc_cpp.cc include/gc_cpp.h \
305
gcname.c include/weakpointer.h include/private/gc_locks.h \
306
gcc_support.c mips_ultrix_mach_dep.s include/gc_alloc.h \
307
include/new_gc_alloc.h include/gc_allocator.h \
308
include/javaxfc.h sparc_sunos4_mach_dep.s sparc_netbsd_mach_dep.s \
309
include/private/solaris_threads.h include/gc_backptr.h \
310
hpux_test_and_clear.s include/gc_gcj.h \
311
include/gc_local_alloc.h include/private/dbg_mlc.h \
312
include/private/specific.h powerpc_darwin_mach_dep.s \
313
include/leak_detector.h include/gc_amiga_redirects.h \
314
include/gc_pthread_redirects.h ia64_save_regs_in_stack.s \
315
include/gc_config_macros.h include/private/pthread_support.h \
316
include/private/pthread_stop_world.h include/private/darwin_semaphore.h \
317
include/private/darwin_stop_world.h $(CORD_SRCS)
319
DOC_FILES= README.QUICK doc/README.Mac doc/README.MacOSX doc/README.OS2 \
320
doc/README.amiga doc/README.cords doc/debugging.html \
321
doc/README.dj doc/README.hp doc/README.linux doc/README.rs6000 \
322
doc/README.sgi doc/README.solaris2 doc/README.uts \
323
doc/README.win32 doc/barrett_diagram doc/README \
324
doc/README.contributors doc/README.changes doc/gc.man \
325
doc/README.environment doc/tree.html doc/gcdescr.html \
326
doc/README.autoconf doc/README.macros doc/README.ews4800 \
327
doc/README.DGUX386 doc/README.arm.cross doc/leak.html \
328
doc/scale.html doc/gcinterface.html doc/README.darwin \
329
doc/simple_example.html
331
TESTS= tests/test.c tests/test_cpp.cc tests/trace_test.c \
332
tests/leak_test.c tests/thread_leak_test.c tests/middle.c
334
GNU_BUILD_FILES= configure.in Makefile.am configure acinclude.m4 \
335
libtool.m4 install-sh configure.host Makefile.in \
336
aclocal.m4 config.sub config.guess \
337
include/Makefile.am include/Makefile.in \
338
doc/Makefile.am doc/Makefile.in \
339
ltmain.sh mkinstalldirs depcomp missing
341
OTHER_MAKEFILES= OS2_MAKEFILE NT_MAKEFILE NT_THREADS_MAKEFILE gc.mak \
342
BCC_MAKEFILE EMX_MAKEFILE WCC_MAKEFILE Makefile.dj \
343
PCR-Makefile SMakefile.amiga Makefile.DLLs \
344
digimars.mak Makefile.direct NT_STATIC_THREADS_MAKEFILE
345
# Makefile and Makefile.direct are copies of each other.
347
OTHER_FILES= Makefile setjmp_t.c callprocs pc_excludes \
348
MacProjects.sit.hqx MacOS.c \
349
Mac_files/datastart.c Mac_files/dataend.c \
350
Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h \
351
add_gc_prefix.c gc_cpp.cpp \
352
version.h AmigaOS.c \
353
$(TESTS) $(GNU_BUILD_FILES) $(OTHER_MAKEFILES)
355
CORD_INCLUDE_FILES= $(srcdir)/include/gc.h $(srcdir)/include/cord.h \
356
$(srcdir)/include/ec.h $(srcdir)/include/private/cord_pos.h
358
UTILS= if_mach if_not_there threadlibs
360
# Libraries needed for curses applications. Only needed for de.
361
CURSES= -lcurses -ltermlib
363
# The following is irrelevant on most systems. But a few
364
# versions of make otherwise fork the shell specified in
365
# the SHELL environment variable.
368
SPECIALCFLAGS = -I$(srcdir)/include
369
# Alternative flags to the C compiler for mach_dep.c.
370
# Mach_dep.c often doesn't like optimization, and it's
371
# not time-critical anyway.
372
# Set SPECIALCFLAGS to -q nodirect_code on Encore.
376
LEAKFLAGS=$(CFLAGS) -DFIND_LEAK
378
BSD-pkg-all: bsd-libgc.a bsd-libleak.a
381
$(MAKE) CFLAGS="$(CFLAGS)" clean c++-t
385
$(MAKE) -f Makefile.direct CFLAGS="$(LEAKFLAGS)" clean c++-nt
386
mv gc.a bsd-libleak.a
388
BSD-pkg-install: BSD-pkg-all
389
${CP} bsd-libgc.a libgc.a
390
${INSTALL_DATA} libgc.a ${PREFIX}/lib
391
${INSTALL_DATA} gc.h gc_cpp.h ${PREFIX}/include
392
${INSTALL_MAN} doc/gc.man ${PREFIX}/man/man3/gc.3
394
pcr: PCR-Makefile include/private/gc_private.h include/private/gc_hdrs.h \
395
include/private/gc_locks.h include/gc.h include/private/gcconfig.h \
397
$(MAKE) -f PCR-Makefile depend
398
$(MAKE) -f PCR-Makefile
400
$(OBJS) tests/test.o dyn_load.o dyn_load_sunos53.o: \
401
$(srcdir)/include/private/gc_priv.h \
402
$(srcdir)/include/private/gc_hdrs.h $(srcdir)/include/private/gc_locks.h \
403
$(srcdir)/include/gc.h $(srcdir)/include/gc_pthread_redirects.h \
404
$(srcdir)/include/private/gcconfig.h $(srcdir)/include/gc_typed.h \
405
$(srcdir)/include/gc_config_macros.h Makefile
406
# The dependency on Makefile is needed. Changing
407
# options such as -DSILENT affects the size of GC_arrays,
408
# invalidating all .o files that rely on gc_priv.h
410
mark.o typd_mlc.o finalize.o ptr_chck.o: $(srcdir)/include/gc_mark.h $(srcdir)/include/private/gc_pmark.h
412
specific.o pthread_support.o: $(srcdir)/include/private/specific.h
414
solaris_threads.o solaris_pthreads.o: $(srcdir)/include/private/solaris_threads.h
416
dbg_mlc.o gcj_mlc.o: $(srcdir)/include/private/dbg_mlc.h
418
tests/test.o: tests $(srcdir)/tests/test.c
419
$(CC) $(CFLAGS) -c $(srcdir)/tests/test.c
420
mv test.o tests/test.o
425
base_lib gc.a: $(OBJS) dyn_load.o $(UTILS)
428
./if_mach SPARC SUNOS5 touch dont_ar_1
429
./if_mach SPARC SUNOS5 $(AR) rus gc.a $(OBJS) dyn_load.o
430
./if_mach M68K AMIGA touch dont_ar_1
431
./if_mach M68K AMIGA $(AR) -vrus gc.a $(OBJS) dyn_load.o
432
./if_not_there dont_ar_1 $(AR) ru gc.a $(OBJS) dyn_load.o
433
./if_not_there dont_ar_1 $(RANLIB) gc.a || cat /dev/null
434
# ignore ranlib failure; that usually means it doesn't exist, and isn't needed
436
cords: $(CORD_OBJS) cord/cordtest $(UTILS)
438
./if_mach SPARC SUNOS5 touch dont_ar_3
439
./if_mach SPARC SUNOS5 $(AR) rus gc.a $(CORD_OBJS)
440
./if_mach M68K AMIGA touch dont_ar_3
441
./if_mach M68K AMIGA $(AR) -vrus gc.a $(CORD_OBJS)
442
./if_not_there dont_ar_3 $(AR) ru gc.a $(CORD_OBJS)
443
./if_not_there dont_ar_3 $(RANLIB) gc.a || cat /dev/null
445
gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/include/gc_cpp.h $(srcdir)/include/gc.h Makefile
446
$(CXX) -c $(CXXFLAGS) $(srcdir)/gc_cpp.cc
448
test_cpp: $(srcdir)/tests/test_cpp.cc $(srcdir)/include/gc_cpp.h gc_cpp.o $(srcdir)/include/gc.h \
451
./if_mach HP_PA HPUX $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc_cpp.o gc.a -ldld `./threadlibs`
452
./if_not_there test_cpp $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc_cpp.o gc.a `./threadlibs`
458
@echo "Use ./test_cpp 1 to test the leak library"
460
c++: gc_cpp.o $(srcdir)/include/gc_cpp.h test_cpp
462
./if_mach SPARC SUNOS5 touch dont_ar_4
463
./if_mach SPARC SUNOS5 $(AR) rus gc.a gc_cpp.o
464
./if_mach M68K AMIGA touch dont_ar_4
465
./if_mach M68K AMIGA $(AR) -vrus gc.a gc_cpp.o
466
./if_not_there dont_ar_4 $(AR) ru gc.a gc_cpp.o
467
./if_not_there dont_ar_4 $(RANLIB) gc.a || cat /dev/null
471
dyn_load_sunos53.o: dyn_load.c
472
$(CC) $(CFLAGS) -DSUNOS53_SHARED_LIB -c $(srcdir)/dyn_load.c -o $@
474
# SunOS5 shared library version of the collector
475
sunos5gc.so: $(OBJS) dyn_load_sunos53.o
476
$(CC) -G -o sunos5gc.so $(OBJS) dyn_load_sunos53.o -ldl
477
ln sunos5gc.so libgc.so
479
# Alpha/OSF shared library version of the collector
480
libalphagc.so: $(OBJS)
481
ld -shared -o libalphagc.so $(OBJS) dyn_load.o -lc
482
ln libalphagc.so libgc.so
484
# IRIX shared library version of the collector
485
libirixgc.so: $(OBJS) dyn_load.o
486
ld -shared $(ABI_FLAG) -o libirixgc.so $(OBJS) dyn_load.o -lc
487
ln libirixgc.so libgc.so
489
# Linux shared library version of the collector
490
liblinuxgc.so: $(OBJS) dyn_load.o
491
gcc -shared -o liblinuxgc.so $(OBJS) dyn_load.o
492
ln liblinuxgc.so libgc.so
494
# Alternative Linux rule. This is preferable, but is likely to break the
495
# Makefile for some non-linux platforms.
496
# LIBOBJS= $(patsubst %.o, %.lo, $(OBJS))
498
#.SUFFIXES: .lo $(SUFFIXES)
501
# $(CC) $(CFLAGS) $(CPPFLAGS) -fPIC -c $< -o $@
503
# liblinuxgc.so: $(LIBOBJS) dyn_load.lo
504
# gcc -shared -Wl,-soname=libgc.so.0 -o libgc.so.0 $(LIBOBJS) dyn_load.lo
505
# touch liblinuxgc.so
507
mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.s \
508
$(srcdir)/mips_ultrix_mach_dep.s \
509
$(srcdir)/rs6000_mach_dep.s $(srcdir)/powerpc_darwin_mach_dep.s \
510
$(srcdir)/sparc_mach_dep.S $(srcdir)/sparc_sunos4_mach_dep.s \
511
$(srcdir)/ia64_save_regs_in_stack.s \
512
$(srcdir)/sparc_netbsd_mach_dep.s $(UTILS)
514
./if_mach MIPS IRIX5 $(CC) -c -o mach_dep.o $(srcdir)/mips_sgi_mach_dep.s
515
./if_mach MIPS RISCOS $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
516
./if_mach MIPS ULTRIX $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
517
./if_mach POWERPC DARWIN $(AS) -o mach_dep.o $(srcdir)/powerpc_darwin_mach_dep.s
518
./if_mach ALPHA LINUX $(CC) -c -o mach_dep.o $(srcdir)/alpha_mach_dep.S
519
./if_mach SPARC SUNOS5 $(CC) -c -o mach_dep.o $(srcdir)/sparc_mach_dep.S
520
./if_mach SPARC SUNOS4 $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s
521
./if_mach SPARC OPENBSD $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s
522
./if_mach SPARC NETBSD $(AS) -o mach_dep.o $(srcdir)/sparc_netbsd_mach_dep.s
523
./if_mach IA64 "" as $(AS_ABI_FLAG) -o ia64_save_regs_in_stack.o $(srcdir)/ia64_save_regs_in_stack.s
524
./if_mach IA64 "" $(CC) -c -o mach_dep1.o $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
525
./if_mach IA64 "" ld -r -o mach_dep.o mach_dep1.o ia64_save_regs_in_stack.o
526
./if_not_there mach_dep.o $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
528
mark_rts.o: $(srcdir)/mark_rts.c $(UTILS)
530
-./if_mach ALPHA OSF1 $(CC) -c $(CFLAGS) -Wo,-notail $(srcdir)/mark_rts.c
531
./if_not_there mark_rts.o $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c
532
# Work-around for DEC optimizer tail recursion elimination bug.
533
# The ALPHA-specific line should be removed if gcc is used.
540
cord/cordbscs.o: cord $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES)
541
$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordbscs.c
542
mv cordbscs.o cord/cordbscs.o
543
# not all compilers understand -o filename
545
cord/cordxtra.o: cord $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES)
546
$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordxtra.c
547
mv cordxtra.o cord/cordxtra.o
549
cord/cordprnt.o: cord $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES)
550
$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordprnt.c
551
mv cordprnt.o cord/cordprnt.o
553
cord/cordtest: $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a $(UTILS)
555
./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -lucb
556
./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -ldld `./threadlibs`
557
./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`
558
./if_not_there cord/cordtest $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`
560
cord/de: $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(UTILS)
562
./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -lucb `./threadlibs`
563
./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld `./threadlibs`
564
./if_mach RS6000 "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
565
./if_mach POWERPC DARWIN $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a
566
./if_mach I386 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
567
./if_mach ALPHA LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
568
./if_mach IA64 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
569
./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
570
./if_not_there cord/de $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) `./threadlibs`
572
if_mach: $(srcdir)/if_mach.c $(srcdir)/include/private/gcconfig.h
573
$(HOSTCC) $(HOSTCFLAGS) -o if_mach $(srcdir)/if_mach.c
575
threadlibs: $(srcdir)/threadlibs.c $(srcdir)/include/private/gcconfig.h Makefile
576
$(HOSTCC) $(HOSTCFLAGS) -o threadlibs $(srcdir)/threadlibs.c
578
if_not_there: $(srcdir)/if_not_there.c
579
$(HOSTCC) $(HOSTCFLAGS) -o if_not_there $(srcdir)/if_not_there.c
582
rm -f gc.a *.o *.exe tests/*.o gctest gctest_dyn_link test_cpp \
583
setjmp_test mon.out gmon.out a.out core if_not_there if_mach \
584
threadlibs $(CORD_OBJS) cord/cordtest cord/de
587
gctest: tests/test.o gc.a $(UTILS)
589
./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o gctest tests/test.o gc.a -lucb
590
./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o gctest tests/test.o gc.a -ldld `./threadlibs`
591
./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o gctest tests/test.o gc.a `./threadlibs`
592
./if_not_there gctest $(CC) $(CFLAGS) -o gctest tests/test.o gc.a `./threadlibs`
594
# If an optimized setjmp_test generates a segmentation fault,
595
# odds are your compiler is broken. Gctest may still work.
596
# Try compiling setjmp_t.c unoptimized.
597
setjmp_test: $(srcdir)/setjmp_t.c $(srcdir)/include/gc.h $(UTILS)
598
$(CC) $(CFLAGS) -o setjmp_test $(srcdir)/setjmp_t.c
600
test: KandRtest cord/cordtest
603
# Those tests that work even with a K&R C compiler:
604
KandRtest: setjmp_test gctest
608
add_gc_prefix: $(srcdir)/add_gc_prefix.c $(srcdir)/version.h
609
$(CC) -o add_gc_prefix $(srcdir)/add_gc_prefix.c
611
gcname: $(srcdir)/gcname.c $(srcdir)/version.h
612
$(CC) -o gcname $(srcdir)/gcname.c
614
gc.tar: $(SRCS) $(DOC_FILES) $(OTHER_FILES) add_gc_prefix gcname
615
cp Makefile Makefile.old
616
cp Makefile.direct Makefile
619
./add_gc_prefix $(SRCS) $(DOC_FILES) $(OTHER_FILES) > /tmp/gc.tar-files
620
tar cvfh gc.tar `cat /tmp/gc.tar-files`
621
cp gc.tar `./gcname`.tar
625
pc_gc.tar: $(SRCS) $(OTHER_FILES)
626
tar cvfX pc_gc.tar pc_excludes $(SRCS) $(OTHER_FILES)
632
-mmd a:/include/private
634
cat pc_gc.tar | (cd /tmp/pc_gc; tar xvf -)
635
-mcopy -tmn /tmp/pc_gc/* a:
636
-mcopy -tmn /tmp/pc_gc/cord/* a:/cord
637
-mcopy -mn /tmp/pc_gc/cord/de_win.ICO a:/cord
638
-mcopy -tmn /tmp/pc_gc/cord/private/* a:/cord/private
639
-mcopy -tmn /tmp/pc_gc/include/* a:/include
640
-mcopy -tmn /tmp/pc_gc/include/private/* a:/include/private
649
lint: $(CSRCS) tests/test.c
650
lint -DLINT $(CSRCS) tests/test.c | egrep -v "possible pointer alignment problem|abort|exit|sbrk|mprotect|syscall|change in ANSI|improper alignment"
652
# BTL: added to test shared library version of collector.
653
# Currently works only under SunOS5. Requires GC_INIT call from statically
654
# loaded client code.
656
gctest_dyn_link: tests/test.o libgc.so
657
$(CC) -L$(ABSDIR) -R$(ABSDIR) -o gctest_dyn_link tests/test.o -lgc -ldl -lthread
659
gctest_irix_dyn_link: tests/test.o libirixgc.so
660
$(CC) -L$(ABSDIR) -o gctest_irix_dyn_link tests/test.o -lirixgc
662
# The following appear to be dead, especially since libgc_globals.h
663
# is apparently lost.
664
test_dll.o: tests/test.c libgc_globals.h
665
$(CC) $(CFLAGS) -DGC_USE_DLL -c tests/test.c -o test_dll.o
667
test_dll: test_dll.o libgc_dll.a libgc.dll
668
$(CC) test_dll.o -L$(ABSDIR) -lgc_dll -o test_dll
672
# Uncomment the following line to build a GNU win32 DLL
673
# include Makefile.DLLs
675
reserved_namespace: $(SRCS)
676
for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
677
sed s/GC_/_GC_/g < $$file > tmp; \
681
user_namespace: $(SRCS)
682
for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
683
sed s/_GC_/GC_/g < $$file > tmp; \
added
removed
src/gc/Makefile.direct
