1
# Makefile.in generated by automake 1.9.6 from Makefile.am.
4
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5
# 2003, 2004, 2005 Free Software Foundation, Inc.
6
# This Makefile.in is free software; the Free Software Foundation
7
# gives unlimited permission to copy and/or distribute it,
8
# with or without modifications, as long as this notice is preserved.
10
# This program is distributed in the hope that it will be useful,
11
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
19
# THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
20
# OR IMPLIED. ANY USE IS AT YOUR OWN RISK.
22
# Permission is hereby granted to use or copy this program
23
# for any purpose, provided the above notices are retained on all copies.
24
# Permission to modify the code and to distribute modified code is granted,
25
# provided the above notices are retained, and a notice that the code was
26
# modified is included with the above copyright notice.
28
# Modified by: Grzegorz Jakacki <jakacki at acm dot org>
31
top_srcdir = @top_srcdir@
33
pkgdatadir = $(datadir)/@PACKAGE@
34
pkglibdir = $(libdir)/@PACKAGE@
35
pkgincludedir = $(includedir)/@PACKAGE@
37
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
39
install_sh_DATA = $(install_sh) -c -m 644
40
install_sh_PROGRAM = $(install_sh) -c
41
install_sh_SCRIPT = $(install_sh) -c
42
INSTALL_HEADER = $(INSTALL_DATA)
43
transform = $(program_transform_name)
50
build_triplet = @build@
52
target_triplet = @target@
54
DIST_COMMON = README $(dist_man3_MANS) $(dist_pkgdata_DATA) \
55
$(srcdir)/Makefile.am $(srcdir)/Makefile.in
56
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
57
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
58
$(top_srcdir)/configure.in
59
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
61
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
65
man3dir = $(mandir)/man3
66
am__installdirs = "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(pkgdatadir)"
68
MANS = $(dist_man3_MANS)
69
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
70
am__vpath_adj = case $$p in \
71
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
74
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
75
dist_pkgdataDATA_INSTALL = $(INSTALL_DATA)
76
DATA = $(dist_pkgdata_DATA)
77
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
79
AMDEP_FALSE = @AMDEP_FALSE@
80
AMDEP_TRUE = @AMDEP_TRUE@
84
AUTOHEADER = @AUTOHEADER@
89
CCASFLAGS = @CCASFLAGS@
90
CCDEPMODE = @CCDEPMODE@
92
COMPILER_XLC_FALSE = @COMPILER_XLC_FALSE@
93
COMPILER_XLC_TRUE = @COMPILER_XLC_TRUE@
94
CPLUSPLUS_FALSE = @CPLUSPLUS_FALSE@
95
CPLUSPLUS_TRUE = @CPLUSPLUS_TRUE@
100
CXXDEPMODE = @CXXDEPMODE@
101
CXXFLAGS = @CXXFLAGS@
102
CXXINCLUDES = @CXXINCLUDES@
103
CYGPATH_W = @CYGPATH_W@
112
EXTRA_TEST_LIBS = @EXTRA_TEST_LIBS@
115
GC_CFLAGS = @GC_CFLAGS@
116
GC_VERSION = @GC_VERSION@
118
INCLUDES = @INCLUDES@
119
INSTALL_DATA = @INSTALL_DATA@
120
INSTALL_PROGRAM = @INSTALL_PROGRAM@
121
INSTALL_SCRIPT = @INSTALL_SCRIPT@
122
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
128
LTLIBOBJS = @LTLIBOBJS@
130
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
131
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
132
MAKEINFO = @MAKEINFO@
133
MY_CFLAGS = @MY_CFLAGS@
136
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
137
PACKAGE_NAME = @PACKAGE_NAME@
138
PACKAGE_STRING = @PACKAGE_STRING@
139
PACKAGE_TARNAME = @PACKAGE_TARNAME@
140
PACKAGE_VERSION = @PACKAGE_VERSION@
141
PATH_SEPARATOR = @PATH_SEPARATOR@
142
POWERPC_DARWIN_FALSE = @POWERPC_DARWIN_FALSE@
143
POWERPC_DARWIN_TRUE = @POWERPC_DARWIN_TRUE@
145
SET_MAKE = @SET_MAKE@
148
THREADDLLIBS = @THREADDLLIBS@
149
UNWINDLIBS = @UNWINDLIBS@
150
USE_LIBDIR_FALSE = @USE_LIBDIR_FALSE@
151
USE_LIBDIR_TRUE = @USE_LIBDIR_TRUE@
153
ac_ct_CC = @ac_ct_CC@
154
ac_ct_CXX = @ac_ct_CXX@
155
ac_ct_F77 = @ac_ct_F77@
156
addincludes = @addincludes@
159
addtests = @addtests@
160
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
161
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
162
am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
163
am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
164
am__include = @am__include@
165
am__leading_dot = @am__leading_dot@
166
am__quote = @am__quote@
168
am__untar = @am__untar@
171
build_alias = @build_alias@
172
build_cpu = @build_cpu@
173
build_os = @build_os@
174
build_vendor = @build_vendor@
176
datarootdir = @datarootdir@
179
exec_prefix = @exec_prefix@
181
host_alias = @host_alias@
182
host_cpu = @host_cpu@
184
host_vendor = @host_vendor@
186
includedir = @includedir@
188
install_sh = @install_sh@
190
libexecdir = @libexecdir@
191
localedir = @localedir@
192
localstatedir = @localstatedir@
195
oldincludedir = @oldincludedir@
198
program_transform_name = @program_transform_name@
201
sharedstatedir = @sharedstatedir@
202
sysconfdir = @sysconfdir@
204
target_alias = @target_alias@
205
target_all = @target_all@
206
target_cpu = @target_cpu@
207
target_os = @target_os@
208
target_vendor = @target_vendor@
210
# installed documentation
212
dist_man3_MANS = gc.man
213
dist_pkgdata_DATA = barrett_diagram debugging.html \
214
gcdescr.html README README.amiga README.arm.cross \
215
README.autoconf README.changes README.contributors \
216
README.cords README.DGUX386 README.dj README.environment \
217
README.ews4800 README.hp README.linux README.Mac \
218
README.MacOSX README.macros README.OS2 README.rs6000 \
219
README.sgi README.solaris2 README.uts README.win32 \
220
tree.html leak.html gcinterface.html scale.html \
221
README.darwin simple_example.html
226
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
228
case '$(am__configure_deps)' in \
230
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
235
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
236
cd $(top_srcdir) && \
237
$(AUTOMAKE) --gnu doc/Makefile
239
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
242
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
244
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
245
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
248
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
249
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
251
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
252
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
253
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
254
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
265
install-man3: $(man3_MANS) $(man_MANS)
267
test -z "$(man3dir)" || $(mkdir_p) "$(DESTDIR)$(man3dir)"
268
@list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
269
l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
272
*.3*) list="$$list $$i" ;; \
275
for i in $$list; do \
276
if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
278
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
283
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
284
inst=`echo $$inst | sed -e 's/^.*\///'`; \
285
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
286
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
287
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst"; \
291
@list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
292
l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
295
*.3*) list="$$list $$i" ;; \
298
for i in $$list; do \
299
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
304
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
305
inst=`echo $$inst | sed -e 's/^.*\///'`; \
306
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
307
echo " rm -f '$(DESTDIR)$(man3dir)/$$inst'"; \
308
rm -f "$(DESTDIR)$(man3dir)/$$inst"; \
310
install-dist_pkgdataDATA: $(dist_pkgdata_DATA)
312
test -z "$(pkgdatadir)" || $(mkdir_p) "$(DESTDIR)$(pkgdatadir)"
313
@list='$(dist_pkgdata_DATA)'; for p in $$list; do \
314
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
316
echo " $(dist_pkgdataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgdatadir)/$$f'"; \
317
$(dist_pkgdataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgdatadir)/$$f"; \
320
uninstall-dist_pkgdataDATA:
322
@list='$(dist_pkgdata_DATA)'; for p in $$list; do \
324
echo " rm -f '$(DESTDIR)$(pkgdatadir)/$$f'"; \
325
rm -f "$(DESTDIR)$(pkgdatadir)/$$f"; \
334
distdir: $(DISTFILES)
335
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
336
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
337
list='$(DISTFILES)'; for file in $$list; do \
339
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
340
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
342
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
343
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
344
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
346
$(mkdir_p) "$(distdir)$$dir"; \
350
if test -d $$d/$$file; then \
351
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
352
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
354
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
356
test -f $(distdir)/$$file \
357
|| cp -p $$d/$$file $(distdir)/$$file \
363
all-am: Makefile $(MANS) $(DATA)
365
for dir in "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(pkgdatadir)"; do \
366
test -z "$$dir" || $(mkdir_p) "$$dir"; \
369
install-exec: install-exec-am
370
install-data: install-data-am
371
uninstall: uninstall-am
374
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
376
installcheck: installcheck-am
378
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
379
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
380
`test -z '$(STRIP)' || \
381
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
387
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
389
maintainer-clean-generic:
390
@echo "This command is intended for maintainers to use"
391
@echo "it deletes files that may require special tools to rebuild."
394
clean-am: clean-generic clean-libtool mostlyclean-am
396
distclean: distclean-am
398
distclean-am: clean-am distclean-generic distclean-libtool
410
install-data-am: install-dist_pkgdataDATA install-man
414
install-info: install-info-am
416
install-man: install-man3
420
maintainer-clean: maintainer-clean-am
422
maintainer-clean-am: distclean-am maintainer-clean-generic
424
mostlyclean: mostlyclean-am
426
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
436
uninstall-am: uninstall-dist_pkgdataDATA uninstall-info-am \
439
uninstall-man: uninstall-man3
441
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
442
distclean distclean-generic distclean-libtool distdir dvi \
443
dvi-am html html-am info info-am install install-am \
444
install-data install-data-am install-dist_pkgdataDATA \
445
install-exec install-exec-am install-info install-info-am \
446
install-man install-man3 install-strip installcheck \
447
installcheck-am installdirs maintainer-clean \
448
maintainer-clean-generic mostlyclean mostlyclean-generic \
449
mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
450
uninstall-dist_pkgdataDATA uninstall-info-am uninstall-man \
453
# Tell versions [3.59,3.63) of GNU make to not export all variables.
454
# Otherwise a system limit (for SysV at least) may be exceeded.
added
removed
doc/Makefile.in
