1
# ltmain.sh - Provide generalized library-building support services.
2
# NOTE: Changing this file will not affect anything until you rerun configure.
4
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003
5
# Free Software Foundation, Inc.
6
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
8
# This program is free software; you can redistribute it and/or modify
9
# it under the terms of the GNU General Public License as published by
10
# the Free Software Foundation; either version 2 of the License, or
11
# (at your option) any later version.
13
# This program is distributed in the hope that it will be useful, but
14
# WITHOUT ANY WARRANTY; without even the implied warranty of
15
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16
# General Public License for more details.
18
# You should have received a copy of the GNU General Public License
19
# along with this program; if not, write to the Free Software
20
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
22
# As a special exception to the GNU General Public License, if you
23
# distribute this file as part of a program that contains a
24
# configuration script generated by Autoconf, you may include it under
25
# the same distribution terms that you use for the rest of that program.
27
# Check that we have a working $echo.
28
if test "X$1" = X--no-reexec; then
29
# Discard the --no-reexec flag, and continue.
31
elif test "X$1" = X--fallback-echo; then
32
# Avoid inline document here, it may be left over
34
elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
35
# Yippee, $echo works!
38
# Restart under the correct shell, and then maybe $echo will work.
39
exec $SHELL "$0" --no-reexec ${1+"$@"}
42
if test "X$1" = X--fallback-echo; then
43
# used as fallback echo
51
# The name of this program.
52
progname=`$echo "$0" | ${SED} 's%^.*/%%'`
59
TIMESTAMP=" (1.1220.2.60 2004/01/25 12:25:08) Debian$Rev: 192 $"
62
help="Try \`$progname --help' for more information."
63
magic="%%%MAGIC variable%%%"
68
# Sed substitution that helps us do robust quoting. It backslashifies
69
# metacharacters that are still active within double-quoted strings.
70
Xsed="${SED}"' -e 1s/^X//'
71
sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
72
# test EBCDIC or ASCII
73
case `echo A|tr A '\301'` in
74
A) # EBCDIC based system
75
SP2NL="tr '\100' '\n'"
76
NL2SP="tr '\r\n' '\100\100'"
78
*) # Assume ASCII based system
79
SP2NL="tr '\040' '\012'"
80
NL2SP="tr '\015\012' '\040\040'"
85
# Only set LANG and LC_ALL to C if already set.
86
# These must not be set unconditionally because not all systems understand
87
# e.g. LANG=C (notably SCO).
88
# We save the old values to restore during execute mode.
89
if test "${LC_ALL+set}" = set; then
90
save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
92
if test "${LANG+set}" = set; then
93
save_LANG="$LANG"; LANG=C; export LANG
96
# Make sure IFS has a sensible default
100
if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
101
$echo "$modename: not configured to build any kind of library" 1>&2
102
$echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
115
lo2o="s/\\.lo\$/.${objext}/"
116
o2lo="s/\\.${objext}\$/.lo/"
118
#####################################
119
# Shell function definitions:
120
# This seems to be the best place for them
122
# Need a lot of goo to handle *both* DLLs and import libs
123
# Has to be a shell function in order to 'eat' the argument
124
# that is supplied when $file_magic_command is called.
126
win32_libid_type="unknown"
127
win32_fileres=`file -L $1 2>/dev/null`
128
case $win32_fileres in
129
*ar\ archive\ import\ library*) # definitely import
130
win32_libid_type="x86 archive import"
132
*ar\ archive*) # could be an import, or static
133
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
134
grep -E 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
135
win32_nmres=`eval $NM -f posix -A $1 | \
136
sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'`
137
if test "X$win32_nmres" = "Ximport" ; then
138
win32_libid_type="x86 archive import"
140
win32_libid_type="x86 archive static"
145
win32_libid_type="x86 DLL"
147
*executable*) # but shell scripts are "executable" too...
148
case $win32_fileres in
149
*MS\ Windows\ PE\ Intel*)
150
win32_libid_type="x86 DLL"
155
$echo $win32_libid_type
158
# End of Shell function definitions
159
#####################################
161
# Parse our command line options once, thoroughly.
162
while test "$#" -gt 0
168
-*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
172
# If the previous option needs an argument, assign it.
173
if test -n "$prev"; then
176
execute_dlfiles="$execute_dlfiles $arg"
180
preserve_args="${preserve_args}=$arg"
182
# Check whether tagname contains only valid characters
185
$echo "$progname: invalid tag name: $tagname" 1>&2
192
# Don't test for the "default" C tag, as we know, it's there, but
193
# not specially marked.
196
if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then
197
taglist="$taglist $tagname"
198
# Evaluate the configuration.
199
eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`"
201
$echo "$progname: ignoring unknown tag $tagname" 1>&2
216
# Have we seen a non-optional argument yet?
223
$echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
225
$echo "Copyright (C) 2003 Free Software Foundation, Inc."
226
$echo "This is free software; see the source for copying conditions. There is NO"
227
$echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
232
${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
233
# Now print the configurations for the tags.
234
for tagname in $taglist; do
235
${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0"
241
$echo "$progname: enabling shell trace mode"
243
preserve_args="$preserve_args $arg"
252
if test "$build_libtool_libs" = yes; then
253
$echo "enable shared libraries"
255
$echo "disable shared libraries"
257
if test "$build_old_libs" = yes; then
258
$echo "enable static libraries"
260
$echo "disable static libraries"
265
--finish) mode="finish" ;;
267
--mode) prevopt="--mode" prev=mode ;;
268
--mode=*) mode="$optarg" ;;
270
--preserve-dup-deps) duplicate_deps="yes" ;;
274
preserve_args="$preserve_args $arg"
277
--tag) prevopt="--tag" prev=tag ;;
279
set tag "$optarg" ${1+"$@"}
282
preserve_args="$preserve_args --tag"
291
$echo "$modename: unrecognized option \`$arg'" 1>&2
303
if test -n "$prevopt"; then
304
$echo "$modename: option \`$prevopt' requires an argument" 1>&2
309
# If this variable is set in any of the actions, the command in it
310
# will be execed at the end. This prevents here-documents from being
311
# left over by shells.
314
if test -z "$show_help"; then
316
# Infer the operation mode.
317
if test -z "$mode"; then
318
$echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
319
$echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2
321
*cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
333
*db | *dbx | *strace | *truss)
343
# If we have no mode, but dlfiles were specified, then do execute mode.
344
test -n "$execute_dlfiles" && mode=execute
346
# Just use the default operation mode.
347
if test -z "$mode"; then
348
if test -n "$nonopt"; then
349
$echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
351
$echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
358
# Only execute mode is allowed to have -dlopen flags.
359
if test -n "$execute_dlfiles" && test "$mode" != execute; then
360
$echo "$modename: unrecognized option \`-dlopen'" 1>&2
365
# Change the help message to a mode-specific one.
367
help="Try \`$modename --help --mode=$mode' for more information."
369
# These modes are in order of execution frequency so that they run quickly.
371
# libtool compile mode
373
modename="$modename: compile"
374
# Get the compilation command and the source file.
376
srcfile="$nonopt" # always keep a non-empty value in "srcfile"
387
# do not "continue". Instead, add this to base_compile
399
# Accept any command-line options.
402
if test -n "$libobj" ; then
403
$echo "$modename: you cannot specify \`-o' more than once" 1>&2
410
-static | -prefer-pic | -prefer-non-pic)
421
arg_mode=arg # the next one goes into the "base_compile" arg list
422
continue # The current "srcfile" will either be retained or
423
;; # replaced later. I would guess that would be a bug.
426
args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
428
save_ifs="$IFS"; IFS=','
432
# Double-quote args containing other shell metacharacters.
433
# Many Bourne shells cannot handle close brackets correctly
434
# in scan sets, so we specify it separately.
436
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
440
lastarg="$lastarg $arg"
443
lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
445
# Add the arguments to base_compile.
446
base_compile="$base_compile $lastarg"
451
# Accept the current argument as the source file.
452
# The previous "srcfile" becomes the current argument.
459
esac # case $arg_mode
461
# Aesthetically quote the previous argument.
462
lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
465
# Double-quote args containing other shell metacharacters.
466
# Many Bourne shells cannot handle close brackets correctly
467
# in scan sets, so we specify it separately.
468
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
469
lastarg="\"$lastarg\""
473
base_compile="$base_compile $lastarg"
478
$echo "$modename: you must specify an argument for -Xcompile"
482
$echo "$modename: you must specify a target with \`-o'" 1>&2
486
# Get the name of the library object.
487
[ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
491
# Recognize several different file suffixes.
492
# If the user specifies -o file.o, it is replaced with file.lo
502
*.class) xform=class ;;
507
*.java) xform=java ;;
510
libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
513
*.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
515
$echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
520
# Infer tagged configuration to use if any are available and
521
# if one wasn't chosen via the "--tag" command line option.
522
# Only attempt this if the compiler in the base compile
523
# command doesn't match the default compiler.
524
if test -n "$available_tags" && test -z "$tagname"; then
525
case $base_compile in
526
# Blanks in the command may have been stripped by the calling shell,
527
# but not from the CC environment variable when configure was run.
528
" $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "*) ;;
529
# Blanks at the start of $base_compile will cause this to fail
530
# if we don't check for them as well.
532
for z in $available_tags; do
533
if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
534
# Evaluate the configuration.
535
eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
536
case "$base_compile " in
537
"$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*)
538
# The compiler in the base compile command matches
539
# the one in the tagged configuration.
540
# Assume this is the tagged configuration we want.
547
# If $tagname still isn't set, then no tagged configuration
548
# was found and let the user know that the "--tag" command
549
# line option must be used.
550
if test -z "$tagname"; then
551
$echo "$modename: unable to infer tagged configuration"
552
$echo "$modename: specify a tag with \`--tag'" 1>&2
555
# $echo "$modename: using $tagname tagged configuration"
561
for arg in $later; do
580
objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
581
xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
582
if test "X$xdir" = "X$obj"; then
587
lobj=${xdir}$objdir/$objname
589
if test -z "$base_compile"; then
590
$echo "$modename: you must specify a compilation command" 1>&2
595
# Delete any leftover library objects.
596
if test "$build_old_libs" = yes; then
597
removelist="$obj $lobj $libobj ${libobj}T"
599
removelist="$lobj $libobj ${libobj}T"
603
trap "$run $rm $removelist; exit 1" 1 2 15
605
# On Cygwin there's no "real" PIC flag so we must build both object types
607
cygwin* | mingw* | pw32* | os2*)
611
if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
612
# non-PIC code in shared libraries is not supported
616
# Calculate the filename of the output object if compiler does
617
# not support -o with -c
618
if test "$compiler_c_o" = no; then
619
output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
620
lockfile="$output_obj.lock"
621
removelist="$removelist $output_obj $lockfile"
622
trap "$run $rm $removelist; exit 1" 1 2 15
629
# Lock this critical section if it is needed
630
# We use this script file to make the link, it avoids creating a new file
631
if test "$need_locks" = yes; then
632
until $run ln "$0" "$lockfile" 2>/dev/null; do
633
$show "Waiting for $lockfile to be removed"
636
elif test "$need_locks" = warn; then
637
if test -f "$lockfile"; then
639
*** ERROR, $lockfile exists and contains:
640
`cat $lockfile 2>/dev/null`
642
This indicates that another process is trying to use the same
643
temporary object file, and libtool could not work around it because
644
your compiler does not support \`-c' and \`-o' together. If you
645
repeat this compilation, it may succeed, by chance, but you had better
646
avoid parallel builds (make -j) in this platform, or get a better
652
$echo $srcfile > "$lockfile"
655
if test -n "$fix_srcfile_path"; then
656
eval srcfile=\"$fix_srcfile_path\"
659
$run $rm "$libobj" "${libobj}T"
661
# Create a libtool object file (analogous to a ".la" file),
662
# but don't create it if we're doing a dry run.
663
test -z "$run" && cat > ${libobj}T <<EOF
664
# $libobj - a libtool object file
665
# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
667
# Please DO NOT delete this file!
668
# It is necessary for linking the library.
670
# Name of the PIC object.
673
# Only build a PIC object if we are building libtool libraries.
674
if test "$build_libtool_libs" = yes; then
675
# Without this assignment, base_compile gets emptied.
676
fbsd_hideous_sh_bug=$base_compile
678
if test "$pic_mode" != no; then
679
command="$base_compile $srcfile $pic_flag"
681
# Don't build PIC code
682
command="$base_compile $srcfile"
685
if test ! -d "${xdir}$objdir"; then
686
$show "$mkdir ${xdir}$objdir"
687
$run $mkdir ${xdir}$objdir
689
if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then
694
if test -z "$output_obj"; then
695
# Place PIC objects in $objdir
696
command="$command -o $lobj"
699
$run $rm "$lobj" "$output_obj"
702
if $run eval "$command"; then :
704
test -n "$output_obj" && $run $rm $removelist
708
if test "$need_locks" = warn &&
709
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
711
*** ERROR, $lockfile contains:
712
`cat $lockfile 2>/dev/null`
714
but it should contain:
717
This indicates that another process is trying to use the same
718
temporary object file, and libtool could not work around it because
719
your compiler does not support \`-c' and \`-o' together. If you
720
repeat this compilation, it may succeed, by chance, but you had better
721
avoid parallel builds (make -j) in this platform, or get a better
728
# Just move the object if needed, then go on to compile the next one
729
if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
730
$show "$mv $output_obj $lobj"
731
if $run $mv $output_obj $lobj; then :
739
# Append the name of the PIC object to the libtool object file.
740
test -z "$run" && cat >> ${libobj}T <<EOF
741
pic_object='$objdir/$objname'
745
# Allow error messages only from the first compilation.
746
if test "$suppress_opt" = yes; then
747
suppress_output=' >/dev/null 2>&1'
750
# No PIC object so indicate it doesn't exist in the libtool
752
test -z "$run" && cat >> ${libobj}T <<EOF
758
# Only build a position-dependent object if we build old libraries.
759
if test "$build_old_libs" = yes; then
760
if test "$pic_mode" != yes; then
761
# Don't build PIC code
762
command="$base_compile $srcfile"
764
command="$base_compile $srcfile $pic_flag"
766
if test "$compiler_c_o" = yes; then
767
command="$command -o $obj"
770
# Suppress compiler output if we already did a PIC compilation.
771
command="$command$suppress_output"
772
$run $rm "$obj" "$output_obj"
774
if $run eval "$command"; then :
780
if test "$need_locks" = warn &&
781
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
783
*** ERROR, $lockfile contains:
784
`cat $lockfile 2>/dev/null`
786
but it should contain:
789
This indicates that another process is trying to use the same
790
temporary object file, and libtool could not work around it because
791
your compiler does not support \`-c' and \`-o' together. If you
792
repeat this compilation, it may succeed, by chance, but you had better
793
avoid parallel builds (make -j) in this platform, or get a better
800
# Just move the object if needed
801
if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
802
$show "$mv $output_obj $obj"
803
if $run $mv $output_obj $obj; then :
811
# Append the name of the non-PIC object the libtool object file.
812
# Only append if the libtool object file exists.
813
test -z "$run" && cat >> ${libobj}T <<EOF
814
# Name of the non-PIC object.
815
non_pic_object='$objname'
819
# Append the name of the non-PIC object the libtool object file.
820
# Only append if the libtool object file exists.
821
test -z "$run" && cat >> ${libobj}T <<EOF
822
# Name of the non-PIC object.
828
$run $mv "${libobj}T" "${libobj}"
830
# Unlock the critical section if it was locked
831
if test "$need_locks" != no; then
840
modename="$modename: link"
842
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
843
# It is impossible to link a dll without this setting, and
844
# we shouldn't force the makefile maintainer to figure out
845
# which system we are compiling for in order to pass an extra
846
# flag for every libtool invocation.
849
# FIXME: Unfortunately, there are problems with the above when trying
850
# to make a dll which has undefined symbols, in which case not
851
# even a static library is built. For now, we need to specify
852
# -no-undefined on the libtool link line when we can be certain
853
# that all symbols are satisfied, otherwise we get a static library.
860
libtool_args="$nonopt"
861
base_compile="$nonopt $@"
862
compile_command="$nonopt"
863
finalize_command="$nonopt"
876
lib_search_path=`pwd`
885
export_symbols_regex=
893
precious_files_regex=
894
prefer_static_libs=no
907
# Infer tagged configuration to use if any are available and
908
# if one wasn't chosen via the "--tag" command line option.
909
# Only attempt this if the compiler in the base link
910
# command doesn't match the default compiler.
911
if test -n "$available_tags" && test -z "$tagname"; then
912
case $base_compile in
913
# Blanks in the command may have been stripped by the calling shell,
914
# but not from the CC environment variable when configure was run.
915
"$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*) ;;
916
# Blanks at the start of $base_compile will cause this to fail
917
# if we don't check for them as well.
919
for z in $available_tags; do
920
if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
921
# Evaluate the configuration.
922
eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
923
case $base_compile in
924
"$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*)
925
# The compiler in $compile_command matches
926
# the one in the tagged configuration.
927
# Assume this is the tagged configuration we want.
934
# If $tagname still isn't set, then no tagged configuration
935
# was found and let the user know that the "--tag" command
936
# line option must be used.
937
if test -z "$tagname"; then
938
$echo "$modename: unable to infer tagged configuration"
939
$echo "$modename: specify a tag with \`--tag'" 1>&2
942
# $echo "$modename: using $tagname tagged configuration"
948
# We need to know -static, to get the right output filenames.
952
-all-static | -static)
953
if test "X$arg" = "X-all-static"; then
954
if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
955
$echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
957
if test -n "$link_static_flag"; then
958
dlopen_self=$dlopen_self_static
961
if test -z "$pic_flag" && test -n "$link_static_flag"; then
962
dlopen_self=$dlopen_self_static
965
build_libtool_libs=no
967
prefer_static_libs=yes
973
# See if our shared archives depend on static archives.
974
test -n "$old_archive_from_new_cmds" && build_old_libs=yes
976
# Go through the arguments, transforming them on the way.
977
while test "$#" -gt 0; do
981
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
982
qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
986
libtool_args="$libtool_args $qarg"
988
# If the previous option needs an argument, assign it.
989
if test -n "$prev"; then
992
compile_command="$compile_command @OUTPUT@"
993
finalize_command="$finalize_command @OUTPUT@"
999
if test "$preload" = no; then
1000
# Add the symbol object into the linking commands.
1001
compile_command="$compile_command @SYMFILE@"
1002
finalize_command="$finalize_command @SYMFILE@"
1006
*.la | *.lo) ;; # We handle these cases below.
1008
if test "$dlself" = no; then
1016
if test "$prev" = dlprefiles; then
1018
elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
1028
if test "$prev" = dlfiles; then
1029
dlfiles="$dlfiles $arg"
1031
dlprefiles="$dlprefiles $arg"
1039
export_symbols="$arg"
1040
if test ! -f "$arg"; then
1041
$echo "$modename: symbol file \`$arg' does not exist"
1048
export_symbols_regex="$arg"
1053
inst_prefix_dir="$arg"
1058
precious_files_regex="$arg"
1068
if test -f "$arg"; then
1071
for fil in `cat $save_arg`
1073
# moreargs="$moreargs $fil"
1075
# A libtool-controlled object.
1077
# Check to see that this really is a libtool object.
1078
if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
1083
# If there is no directory component, then add one.
1085
*/* | *\\*) . $arg ;;
1089
if test -z "$pic_object" || \
1090
test -z "$non_pic_object" ||
1091
test "$pic_object" = none && \
1092
test "$non_pic_object" = none; then
1093
$echo "$modename: cannot find name of object for \`$arg'" 1>&2
1097
# Extract subdirectory from the argument.
1098
xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
1099
if test "X$xdir" = "X$arg"; then
1105
if test "$pic_object" != none; then
1106
# Prepend the subdirectory the object is found in.
1107
pic_object="$xdir$pic_object"
1109
if test "$prev" = dlfiles; then
1110
if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
1111
dlfiles="$dlfiles $pic_object"
1115
# If libtool objects are unsupported, then we need to preload.
1120
# CHECK ME: I think I busted this. -Ossama
1121
if test "$prev" = dlprefiles; then
1122
# Preload the old-style object.
1123
dlprefiles="$dlprefiles $pic_object"
1128
libobjs="$libobjs $pic_object"
1133
if test "$non_pic_object" != none; then
1134
# Prepend the subdirectory the object is found in.
1135
non_pic_object="$xdir$non_pic_object"
1137
# A standard non-PIC object
1138
non_pic_objects="$non_pic_objects $non_pic_object"
1139
if test -z "$pic_object" || test "$pic_object" = none ; then
1140
arg="$non_pic_object"
1144
# Only an error if not doing a dry-run.
1145
if test -z "$run"; then
1146
$echo "$modename: \`$arg' is not a valid libtool object" 1>&2
1151
# Extract subdirectory from the argument.
1152
xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
1153
if test "X$xdir" = "X$arg"; then
1159
pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
1160
non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
1161
libobjs="$libobjs $pic_object"
1162
non_pic_objects="$non_pic_objects $non_pic_object"
1167
$echo "$modename: link input file \`$save_arg' does not exist"
1175
# We need an absolute path.
1177
[\\/]* | [A-Za-z]:[\\/]*) ;;
1179
$echo "$modename: only absolute run-paths are allowed" 1>&2
1183
if test "$prev" = rpath; then
1186
*) rpath="$rpath $arg" ;;
1191
*) xrpath="$xrpath $arg" ;;
1198
compiler_flags="$compiler_flags $qarg"
1200
compile_command="$compile_command $qarg"
1201
finalize_command="$finalize_command $qarg"
1205
linker_flags="$linker_flags $qarg"
1206
compiler_flags="$compiler_flags $wl$qarg"
1208
compile_command="$compile_command $wl$qarg"
1209
finalize_command="$finalize_command $wl$qarg"
1213
linker_flags="$linker_flags $qarg"
1214
compiler_flags="$compiler_flags $qarg"
1216
compile_command="$compile_command $qarg"
1217
finalize_command="$finalize_command $qarg"
1221
eval "$prev=\"\$arg\""
1226
fi # test -n "$prev"
1232
if test -n "$link_static_flag"; then
1233
compile_command="$compile_command $link_static_flag"
1234
finalize_command="$finalize_command $link_static_flag"
1240
# FIXME: remove this flag sometime in the future.
1241
$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
1265
-export-symbols | -export-symbols-regex)
1266
if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
1267
$echo "$modename: more than one -exported-symbols argument is not allowed"
1270
if test "X$arg" = "X-export-symbols"; then
1283
# The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
1284
# so, if we see these flags be careful not to treat them like -L
1286
case $with_gcc/$host in
1287
no/*-*-irix* | /*-*-irix*)
1288
compile_command="$compile_command $arg"
1289
finalize_command="$finalize_command $arg"
1296
dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
1297
# We need an absolute path.
1299
[\\/]* | [A-Za-z]:[\\/]*) ;;
1301
absdir=`cd "$dir" && pwd`
1302
if test -z "$absdir"; then
1303
$echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
1312
deplibs="$deplibs -L$dir"
1313
lib_search_path="$lib_search_path $dir"
1317
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
1318
case :$dllsearchpath: in
1320
*) dllsearchpath="$dllsearchpath:$dir";;
1328
if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
1330
*-*-cygwin* | *-*-pw32* | *-*-beos*)
1331
# These systems don't actually have a C or math library (as such)
1334
*-*-mingw* | *-*-os2*)
1335
# These systems don't actually have a C library (as such)
1336
test "X$arg" = "X-lc" && continue
1338
*-*-openbsd* | *-*-freebsd*)
1339
# Do not include libc due to us having libc/libc_r.
1340
test "X$arg" = "X-lc" && continue
1342
*-*-rhapsody* | *-*-darwin1.[012])
1343
# Rhapsody C and math libraries are in the System framework
1344
deplibs="$deplibs -framework System"
1347
elif test "X$arg" = "X-lc_r"; then
1349
*-*-openbsd* | *-*-freebsd*)
1350
# Do not include libc_r directly, use -pthread flag.
1355
deplibs="$deplibs $arg"
1359
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
1360
deplibs="$deplibs $arg"
1369
# gcc -m* arguments should be passed to the linker via $compiler_flags
1370
# in order to pass architecture information to the linker
1371
# (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo
1372
# but this is not reliable with gcc because gcc may use -mfoo to
1373
# select a different linker, different libraries, etc, while
1374
# -Wl,-mfoo simply passes -mfoo to the linker.
1376
# Unknown arguments in both finalize_command and compile_command need
1377
# to be aesthetically quoted because they are evaled later.
1378
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
1380
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
1384
compile_command="$compile_command $arg"
1385
finalize_command="$finalize_command $arg"
1386
if test "$with_gcc" = "yes" ; then
1387
compiler_flags="$compiler_flags $arg"
1404
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
1405
# The PATH hackery in wrapper scripts is required on Windows
1406
# in order for the loader to find any dlls it needs.
1407
$echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
1408
$echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
1411
*) no_install=yes ;;
1428
-precious-files-regex)
1449
dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
1450
# We need an absolute path.
1452
[\\/]* | [A-Za-z]:[\\/]*) ;;
1454
$echo "$modename: only absolute run-paths are allowed" 1>&2
1460
*) xrpath="$xrpath $dir" ;;
1466
# The effects of -static are defined in a previous loop.
1467
# We used to do the same as -all-static on platforms that
1468
# didn't have a PIC flag, but the assumption that the effects
1469
# would be equivalent was wrong. It would break on at least
1470
# Digital Unix and AIX.
1490
args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
1492
save_ifs="$IFS"; IFS=','
1493
for flag in $args; do
1496
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
1501
compiler_flags="$compiler_flags $flag"
1504
arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
1508
args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
1510
save_ifs="$IFS"; IFS=','
1511
for flag in $args; do
1514
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
1519
compiler_flags="$compiler_flags $wl$flag"
1520
linker_flags="$linker_flags $flag"
1523
arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
1541
# Some other compiler flag.
1543
# Unknown arguments in both finalize_command and compile_command need
1544
# to be aesthetically quoted because they are evaled later.
1545
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
1547
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
1554
# A standard object.
1559
# A libtool-controlled object.
1561
# Check to see that this really is a libtool object.
1562
if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
1567
# If there is no directory component, then add one.
1569
*/* | *\\*) . $arg ;;
1573
if test -z "$pic_object" || \
1574
test -z "$non_pic_object" ||
1575
test "$pic_object" = none && \
1576
test "$non_pic_object" = none; then
1577
$echo "$modename: cannot find name of object for \`$arg'" 1>&2
1581
# Extract subdirectory from the argument.
1582
xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
1583
if test "X$xdir" = "X$arg"; then
1589
if test "$pic_object" != none; then
1590
# Prepend the subdirectory the object is found in.
1591
pic_object="$xdir$pic_object"
1593
if test "$prev" = dlfiles; then
1594
if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
1595
dlfiles="$dlfiles $pic_object"
1599
# If libtool objects are unsupported, then we need to preload.
1604
# CHECK ME: I think I busted this. -Ossama
1605
if test "$prev" = dlprefiles; then
1606
# Preload the old-style object.
1607
dlprefiles="$dlprefiles $pic_object"
1612
libobjs="$libobjs $pic_object"
1617
if test "$non_pic_object" != none; then
1618
# Prepend the subdirectory the object is found in.
1619
non_pic_object="$xdir$non_pic_object"
1621
# A standard non-PIC object
1622
non_pic_objects="$non_pic_objects $non_pic_object"
1623
if test -z "$pic_object" || test "$pic_object" = none ; then
1624
arg="$non_pic_object"
1628
# Only an error if not doing a dry-run.
1629
if test -z "$run"; then
1630
$echo "$modename: \`$arg' is not a valid libtool object" 1>&2
1635
# Extract subdirectory from the argument.
1636
xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
1637
if test "X$xdir" = "X$arg"; then
1643
pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
1644
non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
1645
libobjs="$libobjs $pic_object"
1646
non_pic_objects="$non_pic_objects $non_pic_object"
1653
deplibs="$deplibs $arg"
1654
old_deplibs="$old_deplibs $arg"
1659
# A libtool-controlled library.
1661
if test "$prev" = dlfiles; then
1662
# This library was specified with -dlopen.
1663
dlfiles="$dlfiles $arg"
1665
elif test "$prev" = dlprefiles; then
1666
# The library was specified with -dlpreopen.
1667
dlprefiles="$dlprefiles $arg"
1670
deplibs="$deplibs $arg"
1675
# Some other compiler argument.
1677
# Unknown arguments in both finalize_command and compile_command need
1678
# to be aesthetically quoted because they are evaled later.
1679
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
1681
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
1688
# Now actually substitute the argument into the commands.
1689
if test -n "$arg"; then
1690
compile_command="$compile_command $arg"
1691
finalize_command="$finalize_command $arg"
1693
done # argument parsing loop
1695
if test -n "$prev"; then
1696
$echo "$modename: the \`$prevarg' option requires an argument" 1>&2
1701
if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
1702
eval arg=\"$export_dynamic_flag_spec\"
1703
compile_command="$compile_command $arg"
1704
finalize_command="$finalize_command $arg"
1708
# calculate the name of the file, without its directory
1709
outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
1710
libobjs_save="$libobjs"
1712
if test -n "$shlibpath_var"; then
1713
# get the directories listed in $shlibpath_var
1714
eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
1718
eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
1719
eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
1721
output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
1722
if test "X$output_objdir" = "X$output"; then
1723
output_objdir="$objdir"
1725
output_objdir="$output_objdir/$objdir"
1727
# Create the object directory.
1728
if test ! -d "$output_objdir"; then
1729
$show "$mkdir $output_objdir"
1730
$run $mkdir $output_objdir
1732
if test "$status" -ne 0 && test ! -d "$output_objdir"; then
1737
# Determine the type of output
1740
$echo "$modename: you must specify an output file" 1>&2
1744
*.$libext) linkmode=oldlib ;;
1745
*.lo | *.$objext) linkmode=obj ;;
1746
*.la) linkmode=lib ;;
1747
*) linkmode=prog ;; # Anything else should be a program.
1751
*cygwin* | *mingw* | *pw32*)
1752
# don't eliminate duplcations in $postdeps and $predeps
1753
duplicate_compiler_generated_deps=yes
1756
duplicate_compiler_generated_deps=$duplicate_deps
1762
# Find all interdependent deplibs by searching for libraries
1763
# that are linked more than once (e.g. -la -lb -la)
1764
for deplib in $deplibs; do
1765
if test "X$duplicate_deps" = "Xyes" ; then
1767
*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
1770
libs="$libs $deplib"
1773
if test "$linkmode" = lib; then
1774
libs="$predeps $libs $compiler_lib_search_path $postdeps"
1776
# Compute libraries that are listed more than once in $predeps
1777
# $postdeps and mark them as special (i.e., whose duplicates are
1778
# not to be eliminated).
1780
if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
1781
for pre_post_dep in $predeps $postdeps; do
1782
case "$pre_post_deps " in
1783
*" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
1785
pre_post_deps="$pre_post_deps $pre_post_dep"
1794
need_relink=no # whether we're linking any uninstalled libtool libraries
1795
notinst_deplibs= # not-installed libtool libraries
1796
notinst_path= # paths that contain not-installed libtool libraries
1800
for file in $dlfiles $dlprefiles; do
1804
$echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
1816
passes="conv scan dlopen dlpreopen link"
1821
for pass in $passes; do
1822
if test "$linkmode,$pass" = "lib,link" ||
1823
test "$linkmode,$pass" = "prog,scan"; then
1827
if test "$linkmode" = prog; then
1829
dlopen) libs="$dlfiles" ;;
1830
dlpreopen) libs="$dlprefiles" ;;
1831
link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
1834
if test "$pass" = dlopen; then
1835
# Collect dlpreopened libraries
1836
save_deplibs="$deplibs"
1839
for deplib in $libs; do
1843
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
1844
if test "$linkmode,$pass" = "prog,link"; then
1845
compile_deplibs="$deplib $compile_deplibs"
1846
finalize_deplibs="$deplib $finalize_deplibs"
1848
deplibs="$deplib $deplibs"
1853
if test "$linkmode" != lib && test "$linkmode" != prog; then
1854
$echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
1857
if test "$pass" = conv; then
1858
deplibs="$deplib $deplibs"
1861
name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
1862
for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
1863
for search_ext in .la $shrext .so .a; do
1864
# Search the libtool library
1865
lib="$searchdir/lib${name}${search_ext}"
1866
if test -f "$lib"; then
1867
if test "$search_ext" = ".la"; then
1876
if test "$found" != yes; then
1877
# deplib doesn't seem to be a libtool library
1878
if test "$linkmode,$pass" = "prog,link"; then
1879
compile_deplibs="$deplib $compile_deplibs"
1880
finalize_deplibs="$deplib $finalize_deplibs"
1882
deplibs="$deplib $deplibs"
1883
test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
1886
else # deplib is a libtool library
1887
# If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
1888
# We need to do some special things here, and not later.
1889
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
1890
case " $predeps $postdeps " in
1892
if (${SED} -e '2q' $lib |
1893
grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
1897
*/* | *\\*) . $lib ;;
1900
for l in $old_library $library_names; do
1903
if test "X$ll" = "X$old_library" ; then # only static version available
1905
ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
1906
test "X$ladir" = "X$lib" && ladir="."
1907
lib=$ladir/$old_library
1908
if test "$linkmode,$pass" = "prog,link"; then
1909
compile_deplibs="$deplib $compile_deplibs"
1910
finalize_deplibs="$deplib $finalize_deplibs"
1912
deplibs="$deplib $deplibs"
1913
test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
1927
deplibs="$deplib $deplibs"
1928
test "$pass" = conv && continue
1929
newdependency_libs="$deplib $newdependency_libs"
1930
newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
1933
if test "$pass" = conv; then
1934
deplibs="$deplib $deplibs"
1937
if test "$pass" = scan; then
1938
deplibs="$deplib $deplibs"
1939
newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
1941
compile_deplibs="$deplib $compile_deplibs"
1942
finalize_deplibs="$deplib $finalize_deplibs"
1946
$echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
1952
if test "$pass" = link; then
1953
dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
1954
# Make sure the xrpath contains only unique directories.
1957
*) xrpath="$xrpath $dir" ;;
1960
deplibs="$deplib $deplibs"
1963
*.la) lib="$deplib" ;;
1965
if test "$pass" = conv; then
1966
deplibs="$deplib $deplibs"
1971
if test "$deplibs_check_method" != pass_all; then
1973
$echo "*** Warning: Trying to link with static lib archive $deplib."
1974
$echo "*** I have the capability to make that library automatically link in when"
1975
$echo "*** you link to this library. But I can only do this if you have a"
1976
$echo "*** shared version of the library, which you do not appear to have"
1977
$echo "*** because the file extensions .$libext of this argument makes me believe"
1978
$echo "*** that it is just a static archive that I should not used here."
1981
$echo "*** Warning: Linking the shared library $output against the"
1982
$echo "*** static library $deplib is not portable!"
1983
deplibs="$deplib $deplibs"
1988
if test "$pass" != link; then
1989
deplibs="$deplib $deplibs"
1991
compile_deplibs="$deplib $compile_deplibs"
1992
finalize_deplibs="$deplib $finalize_deplibs"
1999
if test "$pass" = conv; then
2000
deplibs="$deplib $deplibs"
2001
elif test "$linkmode" = prog; then
2002
if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
2003
# If there is no dlopen support or we're linking statically,
2004
# we need to preload.
2005
newdlprefiles="$newdlprefiles $deplib"
2006
compile_deplibs="$deplib $compile_deplibs"
2007
finalize_deplibs="$deplib $finalize_deplibs"
2009
newdlfiles="$newdlfiles $deplib"
2019
if test "$found" = yes || test -f "$lib"; then :
2021
$echo "$modename: cannot find the library \`$lib'" 1>&2
2025
# Check to see that this really is a libtool archive.
2026
if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
2028
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
2032
ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
2033
test "X$ladir" = "X$lib" && ladir="."
2041
# If the library was installed with an old release of libtool,
2042
# it will not redefine variables installed, or shouldnotlink
2048
*/* | *\\*) . $lib ;;
2052
if test "$linkmode,$pass" = "lib,link" ||
2053
test "$linkmode,$pass" = "prog,scan" ||
2054
{ test "$linkmode" != prog && test "$linkmode" != lib; }; then
2055
test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
2056
test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
2059
if test "$pass" = conv; then
2060
# Only check for convenience libraries
2061
deplibs="$lib $deplibs"
2062
if test -z "$libdir"; then
2063
if test -z "$old_library"; then
2064
$echo "$modename: cannot find name of link library for \`$lib'" 1>&2
2067
# It is a libtool convenience library, so add in its objects.
2068
convenience="$convenience $ladir/$objdir/$old_library"
2069
old_convenience="$old_convenience $ladir/$objdir/$old_library"
2071
for deplib in $dependency_libs; do
2072
deplibs="$deplib $deplibs"
2073
if test "X$duplicate_deps" = "Xyes" ; then
2074
case "$tmp_libs " in
2075
*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
2078
tmp_libs="$tmp_libs $deplib"
2080
elif test "$linkmode" != prog && test "$linkmode" != lib; then
2081
$echo "$modename: \`$lib' is not a convenience library" 1>&2
2088
# Get the name of the library we link against.
2090
for l in $old_library $library_names; do
2093
if test -z "$linklib"; then
2094
$echo "$modename: cannot find name of link library for \`$lib'" 1>&2
2098
# This library was specified with -dlopen.
2099
if test "$pass" = dlopen; then
2100
if test -z "$libdir"; then
2101
$echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
2104
if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
2105
# If there is no dlname, no dlopen support or we're linking
2106
# statically, we need to preload. We also need to preload any
2107
# dependent libraries so libltdl's deplib preloader doesn't
2108
# bomb out in the load deplibs phase.
2109
dlprefiles="$dlprefiles $lib $dependency_libs"
2111
newdlfiles="$newdlfiles $lib"
2116
# We need an absolute path.
2118
[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
2120
abs_ladir=`cd "$ladir" && pwd`
2121
if test -z "$abs_ladir"; then
2122
$echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
2123
$echo "$modename: passing it literally to the linker, although it might fail" 1>&2
2128
laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
2130
# Find the relevant object directory and library name.
2131
if test "X$installed" = Xyes; then
2132
if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
2133
$echo "$modename: warning: library \`$lib' was moved." 1>&2
2142
dir="$ladir/$objdir"
2143
absdir="$abs_ladir/$objdir"
2144
# Remove this search path later
2145
notinst_path="$notinst_path $abs_ladir"
2146
fi # $installed = yes
2147
name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
2149
# This library was specified with -dlpreopen.
2150
if test "$pass" = dlpreopen; then
2151
if test -z "$libdir"; then
2152
$echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
2155
# Prefer using a static library (so that no silly _DYNAMIC symbols
2156
# are required to link).
2157
if test -n "$old_library"; then
2158
newdlprefiles="$newdlprefiles $dir/$old_library"
2159
# Otherwise, use the dlname, so that lt_dlopen finds it.
2160
elif test -n "$dlname"; then
2161
newdlprefiles="$newdlprefiles $dir/$dlname"
2163
newdlprefiles="$newdlprefiles $dir/$linklib"
2165
fi # $pass = dlpreopen
2167
if test -z "$libdir"; then
2168
# Link the convenience library
2169
if test "$linkmode" = lib; then
2170
deplibs="$dir/$old_library $deplibs"
2171
elif test "$linkmode,$pass" = "prog,link"; then
2172
compile_deplibs="$dir/$old_library $compile_deplibs"
2173
finalize_deplibs="$dir/$old_library $finalize_deplibs"
2175
deplibs="$lib $deplibs" # used for prog,scan pass
2181
if test "$linkmode" = prog && test "$pass" != link; then
2182
newlib_search_path="$newlib_search_path $ladir"
2183
deplibs="$lib $deplibs"
2186
if test "$link_all_deplibs" != no || test -z "$library_names" ||
2187
test "$build_libtool_libs" = no; then
2192
for deplib in $dependency_libs; do
2194
-L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
2196
# Need to link against all dependency_libs?
2197
if test "$linkalldeplibs" = yes; then
2198
deplibs="$deplib $deplibs"
2200
# Need to hardcode shared library paths
2201
# or/and link against static libraries
2202
newdependency_libs="$deplib $newdependency_libs"
2204
if test "X$duplicate_deps" = "Xyes" ; then
2205
case "$tmp_libs " in
2206
*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
2209
tmp_libs="$tmp_libs $deplib"
2212
fi # $linkmode = prog...
2214
if test "$linkmode,$pass" = "prog,link"; then
2215
if test -n "$library_names" &&
2216
{ test "$prefer_static_libs" = no || test -z "$old_library"; }; then
2217
# We need to hardcode the library path
2218
if test -n "$shlibpath_var"; then
2219
# Make sure the rpath contains only unique directories.
2220
case "$temp_rpath " in
2223
*) temp_rpath="$temp_rpath $dir" ;;
2227
# Hardcode the library path.
2228
# Skip directories that are in the system default run-time
2230
case " $sys_lib_dlsearch_path " in
2233
case "$compile_rpath " in
2235
*) compile_rpath="$compile_rpath $absdir"
2239
case " $sys_lib_dlsearch_path " in
2242
case "$finalize_rpath " in
2244
*) finalize_rpath="$finalize_rpath $libdir"
2248
fi # $linkmode,$pass = prog,link...
2250
if test "$alldeplibs" = yes &&
2251
{ test "$deplibs_check_method" = pass_all ||
2252
{ test "$build_libtool_libs" = yes &&
2253
test -n "$library_names"; }; }; then
2254
# We only need to search for static libraries
2259
link_static=no # Whether the deplib will be linked statically
2260
if test -n "$library_names" &&
2261
{ test "$prefer_static_libs" = no || test -z "$old_library"; }; then
2262
if test "$installed" = no; then
2263
notinst_deplibs="$notinst_deplibs $lib"
2266
# This is a shared library
2268
# Warn about portability, can't link against -module's on some systems (darwin)
2269
if test "$shouldnotlink" = yes && test "$pass" = link ; then
2271
if test "$linkmode" = prog; then
2272
$echo "*** Warning: Linking the executable $output against the loadable module"
2274
$echo "*** Warning: Linking the shared library $output against the loadable module"
2276
$echo "*** $linklib is not portable!"
2278
if test "$linkmode" = lib &&
2279
test "$hardcode_into_libs" = yes; then
2280
# Hardcode the library path.
2281
# Skip directories that are in the system default run-time
2283
case " $sys_lib_dlsearch_path " in
2286
case "$compile_rpath " in
2288
*) compile_rpath="$compile_rpath $absdir"
2292
case " $sys_lib_dlsearch_path " in
2295
case "$finalize_rpath " in
2297
*) finalize_rpath="$finalize_rpath $libdir"
2303
if test -n "$old_archive_from_expsyms_cmds"; then
2304
# figure out the soname
2305
set dummy $library_names
2308
libname=`eval \\$echo \"$libname_spec\"`
2309
# use dlname if we got it. it's perfectly good, no?
2310
if test -n "$dlname"; then
2312
elif test -n "$soname_spec"; then
2316
major=`expr $current - $age`
2320
eval soname=\"$soname_spec\"
2325
# Make a new name for the extract_expsyms_cmds to use
2327
soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
2328
newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
2330
# If the library has no export list, then create one now
2331
if test -f "$output_objdir/$soname-def"; then :
2333
$show "extracting exported symbol list from \`$soname'"
2334
save_ifs="$IFS"; IFS='~'
2335
cmds=$extract_expsyms_cmds
2336
for cmd in $cmds; do
2340
$run eval "$cmd" || exit $?
2346
if test -f "$output_objdir/$newlib"; then :; else
2347
$show "generating import library for \`$soname'"
2348
save_ifs="$IFS"; IFS='~'
2349
cmds=$old_archive_from_expsyms_cmds
2350
for cmd in $cmds; do
2354
$run eval "$cmd" || exit $?
2358
# make sure the library variables are pointing to the new library
2361
fi # test -n "$old_archive_from_expsyms_cmds"
2363
if test "$linkmode" = prog || test "$mode" != relink; then
2368
case $hardcode_action in
2369
immediate | unsupported)
2370
if test "$hardcode_direct" = no; then
2373
*-*-sco3.2v5* ) add_dir="-L$dir" ;;
2375
# if the lib is a module then we can not link against it, someone
2376
# is ignoring the new warnings I added
2377
if /usr/bin/file -L $add 2> /dev/null | grep "bundle" >/dev/null ; then
2378
$echo "** Warning, lib $linklib is a module, not a shared library"
2379
if test -z "$old_library" ; then
2381
$echo "** And there doesn't seem to be a static archive available"
2382
$echo "** The link will probably fail, sorry"
2384
add="$dir/$old_library"
2388
elif test "$hardcode_minus_L" = no; then
2390
*-*-sunos*) add_shlibpath="$dir" ;;
2394
elif test "$hardcode_shlibpath_var" = no; then
2395
add_shlibpath="$dir"
2402
if test "$hardcode_direct" = yes; then
2404
elif test "$hardcode_minus_L" = yes; then
2406
# Try looking first in the location we're being installed to.
2407
if test -n "$inst_prefix_dir"; then
2410
add_dir="$add_dir -L$inst_prefix_dir$libdir"
2415
elif test "$hardcode_shlibpath_var" = yes; then
2416
add_shlibpath="$dir"
2425
if test "$lib_linked" != yes; then
2426
$echo "$modename: configuration error: unsupported hardcode properties"
2430
if test -n "$add_shlibpath"; then
2431
case :$compile_shlibpath: in
2432
*":$add_shlibpath:"*) ;;
2433
*) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
2436
if test "$linkmode" = prog; then
2437
test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
2438
test -n "$add" && compile_deplibs="$add $compile_deplibs"
2440
test -n "$add_dir" && deplibs="$add_dir $deplibs"
2441
test -n "$add" && deplibs="$add $deplibs"
2442
if test "$hardcode_direct" != yes && \
2443
test "$hardcode_minus_L" != yes && \
2444
test "$hardcode_shlibpath_var" = yes; then
2445
case :$finalize_shlibpath: in
2447
*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
2453
if test "$linkmode" = prog || test "$mode" = relink; then
2457
# Finalize command for both is simple: just hardcode it.
2458
if test "$hardcode_direct" = yes; then
2459
add="$libdir/$linklib"
2460
elif test "$hardcode_minus_L" = yes; then
2463
elif test "$hardcode_shlibpath_var" = yes; then
2464
case :$finalize_shlibpath: in
2466
*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
2469
elif test "$hardcode_automatic" = yes; then
2470
if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then
2471
add="$inst_prefix_dir$libdir/$linklib"
2473
add="$libdir/$linklib"
2476
# We cannot seem to hardcode it, guess we'll fake it.
2478
# Try looking first in the location we're being installed to.
2479
if test -n "$inst_prefix_dir"; then
2482
add_dir="$add_dir -L$inst_prefix_dir$libdir"
2489
if test "$linkmode" = prog; then
2490
test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
2491
test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
2493
test -n "$add_dir" && deplibs="$add_dir $deplibs"
2494
test -n "$add" && deplibs="$add $deplibs"
2497
elif test "$linkmode" = prog; then
2498
# Here we assume that one of hardcode_direct or hardcode_minus_L
2499
# is not unsupported. This is valid on all known static and
2501
if test "$hardcode_direct" != unsupported; then
2502
test -n "$old_library" && linklib="$old_library"
2503
compile_deplibs="$dir/$linklib $compile_deplibs"
2504
finalize_deplibs="$dir/$linklib $finalize_deplibs"
2506
compile_deplibs="-l$name -L$dir $compile_deplibs"
2507
finalize_deplibs="-l$name -L$dir $finalize_deplibs"
2509
elif test "$build_libtool_libs" = yes; then
2510
# Not a shared library
2511
if test "$deplibs_check_method" != pass_all; then
2512
# We're trying link a shared library against a static one
2513
# but the system doesn't support it.
2515
# Just print a warning and add the library to dependency_libs so
2516
# that the program can be linked against the static library.
2518
$echo "*** Warning: This system can not link to static lib archive $lib."
2519
$echo "*** I have the capability to make that library automatically link in when"
2520
$echo "*** you link to this library. But I can only do this if you have a"
2521
$echo "*** shared version of the library, which you do not appear to have."
2522
if test "$module" = yes; then
2523
$echo "*** But as you try to build a module library, libtool will still create "
2524
$echo "*** a static module, that should work as long as the dlopening application"
2525
$echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
2526
if test -z "$global_symbol_pipe"; then
2528
$echo "*** However, this would only work if libtool was able to extract symbol"
2529
$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
2530
$echo "*** not find such a program. So, this module is probably useless."
2531
$echo "*** \`nm' from GNU binutils and a full rebuild may help."
2533
if test "$build_old_libs" = no; then
2534
build_libtool_libs=module
2537
build_libtool_libs=no
2541
convenience="$convenience $dir/$old_library"
2542
old_convenience="$old_convenience $dir/$old_library"
2543
deplibs="$dir/$old_library $deplibs"
2546
fi # link shared/static library?
2548
if test "$linkmode" = lib; then
2549
if test -n "$dependency_libs" &&
2550
{ test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes ||
2551
test "$link_static" = yes; }; then
2552
# Extract -R from dependency_libs
2554
for libdir in $dependency_libs; do
2556
-R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
2558
*" $temp_xrpath "*) ;;
2559
*) xrpath="$xrpath $temp_xrpath";;
2561
*) temp_deplibs="$temp_deplibs $libdir";;
2564
dependency_libs="$temp_deplibs"
2567
newlib_search_path="$newlib_search_path $absdir"
2568
# Link against this library
2569
test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
2570
# ... and its dependency_libs
2572
for deplib in $dependency_libs; do
2573
newdependency_libs="$deplib $newdependency_libs"
2574
if test "X$duplicate_deps" = "Xyes" ; then
2575
case "$tmp_libs " in
2576
*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
2579
tmp_libs="$tmp_libs $deplib"
2582
if test "$link_all_deplibs" != no; then
2583
# Add the search paths of all dependency libraries
2584
for deplib in $dependency_libs; do
2586
-L*) path="$deplib" ;;
2588
dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
2589
test "X$dir" = "X$deplib" && dir="."
2590
# We need an absolute path.
2592
[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
2594
absdir=`cd "$dir" && pwd`
2595
if test -z "$absdir"; then
2596
$echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
2601
if grep "^installed=no" $deplib > /dev/null; then
2602
path="$absdir/$objdir"
2604
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
2605
if test -z "$libdir"; then
2606
$echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
2609
if test "$absdir" != "$libdir"; then
2610
$echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
2617
# we do not want to link against static libs, but need to link against shared
2618
eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
2619
if test -n "$deplibrary_names" ; then
2620
for tmp in $deplibrary_names ; do
2623
if test -f "$path/$depdepl" ; then
2624
depdepl="$path/$depdepl"
2626
# do not add paths which are already there
2627
case " $newlib_search_path " in
2629
*) newlib_search_path="$newlib_search_path $path";;
2643
# Again, we only want to link against shared libraries
2644
eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
2645
for tmp in $newlib_search_path ; do
2646
if test -f "$tmp/lib$tmp_libs.dylib" ; then
2647
eval depdepl="$tmp/lib$tmp_libs.dylib"
2658
case " $deplibs " in
2660
*) deplibs="$deplibs $depdepl" ;;
2662
case " $deplibs " in
2664
*) deplibs="$deplibs $path" ;;
2667
fi # link_all_deplibs != no
2669
done # for deplib in $libs
2670
dependency_libs="$newdependency_libs"
2671
if test "$pass" = dlpreopen; then
2672
# Link the dlpreopened libraries before other libraries
2673
for deplib in $save_deplibs; do
2674
deplibs="$deplib $deplibs"
2677
if test "$pass" != dlopen; then
2678
if test "$pass" != conv; then
2679
# Make sure lib_search_path contains only unique directories.
2681
for dir in $newlib_search_path; do
2682
case "$lib_search_path " in
2684
*) lib_search_path="$lib_search_path $dir" ;;
2690
if test "$linkmode,$pass" != "prog,link"; then
2693
vars="compile_deplibs finalize_deplibs"
2695
for var in $vars dependency_libs; do
2696
# Add libraries to $var in reverse order
2697
eval tmp_libs=\"\$$var\"
2699
for deplib in $tmp_libs; do
2700
# FIXME: Pedantically, this is the right thing to do, so
2701
# that some nasty dependency loop isn't accidentally
2703
#new_libs="$deplib $new_libs"
2704
# Pragmatically, this seems to cause very few problems in
2707
-L*) new_libs="$deplib $new_libs" ;;
2710
# And here is the reason: when a library appears more
2711
# than once as an explicit dependence of a library, or
2712
# is implicitly linked in more than once by the
2713
# compiler, it is considered special, and multiple
2714
# occurrences thereof are not removed. Compare this
2715
# with having the same library being listed as a
2716
# dependency of multiple other libraries: in this case,
2717
# we know (pedantically, we assume) the library does not
2718
# need to be listed more than once, so we keep only the
2719
# last copy. This is not always right, but it is rare
2720
# enough that we require users that really mean to play
2721
# such unportable linking tricks to link the library
2722
# using -Wl,-lname, so that libtool does not consider it
2723
# for duplicate removal.
2724
case " $specialdeplibs " in
2725
*" $deplib "*) new_libs="$deplib $new_libs" ;;
2727
case " $new_libs " in
2729
*) new_libs="$deplib $new_libs" ;;
2737
for deplib in $new_libs; do
2740
case " $tmp_libs " in
2742
*) tmp_libs="$tmp_libs $deplib" ;;
2745
*) tmp_libs="$tmp_libs $deplib" ;;
2748
eval $var=\"$tmp_libs\"
2751
# Last step: remove runtime libs from dependency_libs (they stay in deplibs)
2753
for i in $dependency_libs ; do
2754
case " $predeps $postdeps $compiler_lib_search_path " in
2759
if test -n "$i" ; then
2760
tmp_libs="$tmp_libs $i"
2763
dependency_libs=$tmp_libs
2765
if test "$linkmode" = prog; then
2766
dlfiles="$newdlfiles"
2767
dlprefiles="$newdlprefiles"
2772
if test -n "$deplibs"; then
2773
$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
2776
if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
2777
$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
2780
if test -n "$rpath"; then
2781
$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
2784
if test -n "$xrpath"; then
2785
$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
2788
if test -n "$vinfo"; then
2789
$echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
2792
if test -n "$release"; then
2793
$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
2796
if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
2797
$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
2800
# Now set the variables for building old libraries.
2801
build_libtool_libs=no
2803
objs="$objs$old_deplibs"
2807
# Make sure we only generate libraries of the form `libNAME.la'.
2810
name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
2811
eval shared_ext=\"$shrext\"
2812
eval libname=\"$libname_spec\"
2815
if test "$module" = no; then
2816
$echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
2820
if test "$need_lib_prefix" != no; then
2821
# Add the "lib" prefix for modules if required
2822
name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
2823
eval shared_ext=\"$shrext\"
2824
eval libname=\"$libname_spec\"
2826
libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
2831
if test -n "$objs"; then
2832
if test "$deplibs_check_method" != pass_all; then
2833
$echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
2837
$echo "*** Warning: Linking the shared library $output against the non-libtool"
2838
$echo "*** objects $objs is not portable!"
2839
libobjs="$libobjs $objs"
2843
if test "$dlself" != no; then
2844
$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
2848
if test "$#" -gt 2; then
2849
$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
2854
if test -z "$rpath"; then
2855
if test "$build_libtool_libs" = yes; then
2856
# Building a libtool convenience library.
2857
# Some compilers have problems with a `.al' extension so
2858
# convenience libraries should have the same extension an
2859
# archive normally would.
2860
oldlibs="$output_objdir/$libname.$libext $oldlibs"
2861
build_libtool_libs=convenience
2865
if test -n "$vinfo"; then
2866
$echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
2869
if test -n "$release"; then
2870
$echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
2874
# Parse the version information argument.
2875
save_ifs="$IFS"; IFS=':'
2876
set dummy $vinfo 0 0 0
2879
if test -n "$8"; then
2880
$echo "$modename: too many parameters to \`-version-info'" 1>&2
2885
# convert absolute version numbers to libtool ages
2886
# this retains compatibility with .la files and attempts
2887
# to make the code below a bit more comprehensible
2889
case $vinfo_number in
2893
number_revision="$4"
2895
# There are really only two kinds -- those that
2896
# use the current revision as the major version
2897
# and those that subtract age and use age as
2898
# a minor version. But, then there is irix
2899
# which has an extra 1 added just for fun
2901
case $version_type in
2902
darwin|linux|osf|windows)
2903
current=`expr $number_major + $number_minor`
2905
revision="$number_revision"
2907
freebsd-aout|freebsd-elf|sunos)
2908
current="$number_major"
2909
revision="$number_minor"
2913
current=`expr $number_major + $number_minor - 1`
2915
revision="$number_minor"
2926
# Check that each of the things are valid numbers.
2928
0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
2930
$echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
2931
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
2937
0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
2939
$echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
2940
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
2946
0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
2948
$echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
2949
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
2954
if test "$age" -gt "$current"; then
2955
$echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
2956
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
2960
# Calculate the version variables.
2964
case $version_type in
2968
# Like Linux, but with the current version available in
2969
# verstring for coding it into the library header
2970
major=.`expr $current - $age`
2971
versuffix="$major.$age.$revision"
2972
# Darwin ld doesn't like 0 for these options...
2973
minor_current=`expr $current + 1`
2974
verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
2979
versuffix=".$current.$revision";
2984
versuffix=".$current";
2988
major=`expr $current - $age + 1`
2990
case $version_type in
2991
nonstopux) verstring_prefix=nonstopux ;;
2992
*) verstring_prefix=sgi ;;
2994
verstring="$verstring_prefix$major.$revision"
2996
# Add in all the interfaces that we are compatible with.
2998
while test "$loop" -ne 0; do
2999
iface=`expr $revision - $loop`
3000
loop=`expr $loop - 1`
3001
verstring="$verstring_prefix$major.$iface:$verstring"
3004
# Before this point, $major must not contain `.'.
3006
versuffix="$major.$revision"
3010
major=.`expr $current - $age`
3011
versuffix="$major.$age.$revision"
3015
major=.`expr $current - $age`
3016
versuffix=".$current.$age.$revision"
3017
verstring="$current.$age.$revision"
3019
# Add in all the interfaces that we are compatible with.
3021
while test "$loop" -ne 0; do
3022
iface=`expr $current - $loop`
3023
loop=`expr $loop - 1`
3024
verstring="$verstring:${iface}.0"
3027
# Make executables depend on our current version.
3028
verstring="$verstring:${current}.0"
3033
versuffix=".$current.$revision"
3037
# Use '-' rather than '.', since we only want one
3038
# extension on DOS 8.3 filesystems.
3039
major=`expr $current - $age`
3044
$echo "$modename: unknown library version type \`$version_type'" 1>&2
3045
$echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
3050
# Clear the version info if we defaulted, and they specified a release.
3051
if test -z "$vinfo" && test -n "$release"; then
3053
case $version_type in
3055
# we can't check for "0.0" in archive_cmds due to quoting
3056
# problems, so we reset it completely
3063
if test "$need_version" = no; then
3070
# Remove version info from name if versioning should be avoided
3071
if test "$avoid_version" = yes && test "$need_version" = no; then
3077
# Check to see if the archive will have undefined symbols.
3078
if test "$allow_undefined" = yes; then
3079
if test "$allow_undefined_flag" = unsupported; then
3080
$echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
3081
build_libtool_libs=no
3085
# Don't allow undefined symbols.
3086
allow_undefined_flag="$no_undefined_flag"
3090
if test "$mode" != relink; then
3091
# Remove our outputs, but don't remove object files since they
3092
# may have been created when compiling PIC objects.
3094
tempremovelist=`$echo "$output_objdir/*"`
3095
for p in $tempremovelist; do
3099
$output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
3100
if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
3104
removelist="$removelist $p"
3109
if test -n "$removelist"; then
3110
$show "${rm}r $removelist"
3111
$run ${rm}r $removelist
3115
# Now set the variables for building old libraries.
3116
if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
3117
oldlibs="$oldlibs $output_objdir/$libname.$libext"
3119
# Transform .lo files to .o files.
3120
oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
3123
# Eliminate all temporary directories.
3124
for path in $notinst_path; do
3125
lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
3126
deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
3127
dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
3130
if test -n "$xrpath"; then
3131
# If the user specified any rpath flags, then add them.
3133
for libdir in $xrpath; do
3134
temp_xrpath="$temp_xrpath -R$libdir"
3135
case "$finalize_rpath " in
3137
*) finalize_rpath="$finalize_rpath $libdir" ;;
3140
if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
3141
dependency_libs="$temp_xrpath $dependency_libs"
3145
# Make sure dlfiles contains only unique files that won't be dlpreopened
3146
old_dlfiles="$dlfiles"
3148
for lib in $old_dlfiles; do
3149
case " $dlprefiles $dlfiles " in
3151
*) dlfiles="$dlfiles $lib" ;;
3155
# Make sure dlprefiles contains only unique files
3156
old_dlprefiles="$dlprefiles"
3158
for lib in $old_dlprefiles; do
3159
case "$dlprefiles " in
3161
*) dlprefiles="$dlprefiles $lib" ;;
3165
if test "$build_libtool_libs" = yes; then
3166
if test -n "$rpath"; then
3168
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
3169
# these systems don't actually have a c library (as such)!
3171
*-*-rhapsody* | *-*-darwin1.[012])
3172
# Rhapsody C library is in the System framework
3173
deplibs="$deplibs -framework System"
3176
# Don't link with libc until the a.out ld.so is fixed.
3178
*-*-openbsd* | *-*-freebsd*)
3179
# Do not include libc due to us having libc/libc_r.
3180
test "X$arg" = "X-lc" && continue
3183
# Add libc to deplibs on all other systems if necessary.
3184
if test "$build_libtool_need_lc" = "yes"; then
3185
deplibs="$deplibs -lc"
3191
# Transform deplibs into only deplibs that can be linked in shared.
3193
libname_save=$libname
3194
release_save=$release
3195
versuffix_save=$versuffix
3197
# I'm not sure if I'm treating the release correctly. I think
3198
# release should show up in the -l (ie -lgmp5) so we don't want to
3199
# add it in twice. Is that correct?
3205
case $deplibs_check_method in
3207
# Don't check for shared/static. Everything works.
3208
# This might be a little naive. We might want to check
3209
# whether the library exists or not. But this is on
3210
# osf3 & osf4 and I'm not really sure... Just
3211
# implementing what was already the behavior.
3215
# This code stresses the "libraries are programs" paradigm to its
3216
# limits. Maybe even breaks it. We compile a program, linking it
3217
# against the deplibs as a proxy for the library. Then we can check
3218
# whether they linked in statically or dynamically with ldd.
3220
cat > conftest.c <<EOF
3221
int main() { return 0; }
3224
$LTCC -o conftest conftest.c $deplibs
3225
if test "$?" -eq 0 ; then
3226
ldd_output=`ldd conftest`
3227
for i in $deplibs; do
3228
name="`expr $i : '-l\(.*\)'`"
3229
# If $name is empty we are operating on a -L argument.
3230
if test "$name" != "" && test "$name" -ne "0"; then
3231
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
3232
case " $predeps $postdeps " in
3234
newdeplibs="$newdeplibs $i"
3239
if test -n "$i" ; then
3240
libname=`eval \\$echo \"$libname_spec\"`
3241
deplib_matches=`eval \\$echo \"$library_names_spec\"`
3242
set dummy $deplib_matches
3244
if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
3245
newdeplibs="$newdeplibs $i"
3249
$echo "*** Warning: dynamic linker does not accept needed library $i."
3250
$echo "*** I have the capability to make that library automatically link in when"
3251
$echo "*** you link to this library. But I can only do this if you have a"
3252
$echo "*** shared version of the library, which I believe you do not have"
3253
$echo "*** because a test_compile did reveal that the linker did not use it for"
3254
$echo "*** its dynamic dependency list that programs get resolved with at runtime."
3258
newdeplibs="$newdeplibs $i"
3262
# Error occurred in the first compile. Let's try to salvage
3263
# the situation: Compile a separate program for each library.
3264
for i in $deplibs; do
3265
name="`expr $i : '-l\(.*\)'`"
3266
# If $name is empty we are operating on a -L argument.
3267
if test "$name" != "" && test "$name" != "0"; then
3269
$LTCC -o conftest conftest.c $i
3271
if test "$?" -eq 0 ; then
3272
ldd_output=`ldd conftest`
3273
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
3274
case " $predeps $postdeps " in
3276
newdeplibs="$newdeplibs $i"
3281
if test -n "$i" ; then
3282
libname=`eval \\$echo \"$libname_spec\"`
3283
deplib_matches=`eval \\$echo \"$library_names_spec\"`
3284
set dummy $deplib_matches
3286
if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
3287
newdeplibs="$newdeplibs $i"
3291
$echo "*** Warning: dynamic linker does not accept needed library $i."
3292
$echo "*** I have the capability to make that library automatically link in when"
3293
$echo "*** you link to this library. But I can only do this if you have a"
3294
$echo "*** shared version of the library, which you do not appear to have"
3295
$echo "*** because a test_compile did reveal that the linker did not use this one"
3296
$echo "*** as a dynamic dependency that programs can get resolved with at runtime."
3302
$echo "*** Warning! Library $i is needed by this library but I was not able to"
3303
$echo "*** make it link in! You will probably need to install it or some"
3304
$echo "*** library that it depends on before this library will be fully"
3305
$echo "*** functional. Installing it before continuing would be even better."
3308
newdeplibs="$newdeplibs $i"
3314
set dummy $deplibs_check_method
3315
file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
3316
for a_deplib in $deplibs; do
3317
name="`expr $a_deplib : '-l\(.*\)'`"
3318
# If $name is empty we are operating on a -L argument.
3319
if test "$name" != "" && test "$name" != "0"; then
3320
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
3321
case " $predeps $postdeps " in
3323
newdeplibs="$newdeplibs $a_deplib"
3328
if test -n "$a_deplib" ; then
3329
libname=`eval \\$echo \"$libname_spec\"`
3330
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
3331
potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
3332
for potent_lib in $potential_libs; do
3333
# Follow soft links.
3334
if ls -lLd "$potent_lib" 2>/dev/null \
3335
| grep " -> " >/dev/null; then
3338
# The statement above tries to avoid entering an
3339
# endless loop below, in case of cyclic links.
3340
# We might still enter an endless loop, since a link
3341
# loop can be closed while we follow links,
3343
potlib="$potent_lib"
3344
while test -h "$potlib" 2>/dev/null; do
3345
potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
3347
[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
3348
*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
3351
if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
3353
| $EGREP "$file_magic_regex" > /dev/null; then
3354
newdeplibs="$newdeplibs $a_deplib"
3361
if test -n "$a_deplib" ; then
3364
$echo "*** Warning: linker path does not have real file for library $a_deplib."
3365
$echo "*** I have the capability to make that library automatically link in when"
3366
$echo "*** you link to this library. But I can only do this if you have a"
3367
$echo "*** shared version of the library, which you do not appear to have"
3368
$echo "*** because I did check the linker path looking for a file starting"
3369
if test -z "$potlib" ; then
3370
$echo "*** with $libname but no candidates were found. (...for file magic test)"
3372
$echo "*** with $libname and none of the candidates passed a file format test"
3373
$echo "*** using a file magic. Last file checked: $potlib"
3377
# Add a -L argument.
3378
newdeplibs="$newdeplibs $a_deplib"
3380
done # Gone through all deplibs.
3383
set dummy $deplibs_check_method
3384
match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
3385
for a_deplib in $deplibs; do
3386
name="`expr $a_deplib : '-l\(.*\)'`"
3387
# If $name is empty we are operating on a -L argument.
3388
if test -n "$name" && test "$name" != "0"; then
3389
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
3390
case " $predeps $postdeps " in
3392
newdeplibs="$newdeplibs $a_deplib"
3397
if test -n "$a_deplib" ; then
3398
libname=`eval \\$echo \"$libname_spec\"`
3399
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
3400
potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
3401
for potent_lib in $potential_libs; do
3402
potlib="$potent_lib" # see symlink-check above in file_magic test
3403
if eval $echo \"$potent_lib\" 2>/dev/null \
3405
| $EGREP "$match_pattern_regex" > /dev/null; then
3406
newdeplibs="$newdeplibs $a_deplib"
3413
if test -n "$a_deplib" ; then
3416
$echo "*** Warning: linker path does not have real file for library $a_deplib."
3417
$echo "*** I have the capability to make that library automatically link in when"
3418
$echo "*** you link to this library. But I can only do this if you have a"
3419
$echo "*** shared version of the library, which you do not appear to have"
3420
$echo "*** because I did check the linker path looking for a file starting"
3421
if test -z "$potlib" ; then
3422
$echo "*** with $libname but no candidates were found. (...for regex pattern test)"
3424
$echo "*** with $libname and none of the candidates passed a file format test"
3425
$echo "*** using a regex pattern. Last file checked: $potlib"
3429
# Add a -L argument.
3430
newdeplibs="$newdeplibs $a_deplib"
3432
done # Gone through all deplibs.
3436
tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
3437
-e 's/ -[LR][^ ]*//g'`
3438
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
3439
for i in $predeps $postdeps ; do
3440
# can't use Xsed below, because $i might contain '/'
3441
tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
3444
if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \
3445
| grep . >/dev/null; then
3447
if test "X$deplibs_check_method" = "Xnone"; then
3448
$echo "*** Warning: inter-library dependencies are not supported in this platform."
3450
$echo "*** Warning: inter-library dependencies are not known to be supported."
3452
$echo "*** All declared inter-library dependencies are being dropped."
3457
versuffix=$versuffix_save
3459
release=$release_save
3460
libname=$libname_save
3464
*-*-rhapsody* | *-*-darwin1.[012])
3465
# On Rhapsody replace the C library is the System framework
3466
newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
3470
if test "$droppeddeps" = yes; then
3471
if test "$module" = yes; then
3473
$echo "*** Warning: libtool could not satisfy all declared inter-library"
3474
$echo "*** dependencies of module $libname. Therefore, libtool will create"
3475
$echo "*** a static module, that should work as long as the dlopening"
3476
$echo "*** application is linked with the -dlopen flag."
3477
if test -z "$global_symbol_pipe"; then
3479
$echo "*** However, this would only work if libtool was able to extract symbol"
3480
$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
3481
$echo "*** not find such a program. So, this module is probably useless."
3482
$echo "*** \`nm' from GNU binutils and a full rebuild may help."
3484
if test "$build_old_libs" = no; then
3485
oldlibs="$output_objdir/$libname.$libext"
3486
build_libtool_libs=module
3489
build_libtool_libs=no
3492
$echo "*** The inter-library dependencies that have been dropped here will be"
3493
$echo "*** automatically added whenever a program is linked with this library"
3494
$echo "*** or is declared to -dlopen it."
3496
if test "$allow_undefined" = no; then
3498
$echo "*** Since this library must not contain undefined symbols,"
3499
$echo "*** because either the platform does not support them or"
3500
$echo "*** it was explicitly requested with -no-undefined,"
3501
$echo "*** libtool will only create a static version of it."
3502
if test "$build_old_libs" = no; then
3503
oldlibs="$output_objdir/$libname.$libext"
3504
build_libtool_libs=module
3507
build_libtool_libs=no
3512
# Done checking deplibs!
3516
# All the library-specific variables (install_libdir is set above).
3521
# Test again, we may have decided not to build it any more
3522
if test "$build_libtool_libs" = yes; then
3523
if test "$hardcode_into_libs" = yes; then
3524
# Hardcode the library paths
3527
rpath="$finalize_rpath"
3528
test "$mode" != relink && rpath="$compile_rpath$rpath"
3529
for libdir in $rpath; do
3530
if test -n "$hardcode_libdir_flag_spec"; then
3531
if test -n "$hardcode_libdir_separator"; then
3532
if test -z "$hardcode_libdirs"; then
3533
hardcode_libdirs="$libdir"
3535
# Just accumulate the unique libdirs.
3536
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
3537
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
3540
hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
3545
eval flag=\"$hardcode_libdir_flag_spec\"
3546
dep_rpath="$dep_rpath $flag"
3548
elif test -n "$runpath_var"; then
3549
case "$perm_rpath " in
3551
*) perm_rpath="$perm_rpath $libdir" ;;
3555
# Substitute the hardcoded libdirs into the rpath.
3556
if test -n "$hardcode_libdir_separator" &&
3557
test -n "$hardcode_libdirs"; then
3558
libdir="$hardcode_libdirs"
3559
if test -n "$hardcode_libdir_flag_spec_ld"; then
3560
eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
3562
eval dep_rpath=\"$hardcode_libdir_flag_spec\"
3565
if test -n "$runpath_var" && test -n "$perm_rpath"; then
3566
# We should set the runpath_var.
3568
for dir in $perm_rpath; do
3571
eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
3573
test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
3576
shlibpath="$finalize_shlibpath"
3577
test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
3578
if test -n "$shlibpath"; then
3579
eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
3582
# Get the real and link names of the library.
3583
eval shared_ext=\"$shrext\"
3584
eval library_names=\"$library_names_spec\"
3585
set dummy $library_names
3589
if test -n "$soname_spec"; then
3590
eval soname=\"$soname_spec\"
3594
if test -z "$dlname"; then
3598
lib="$output_objdir/$realname"
3601
linknames="$linknames $link"
3604
# Use standard objects if they are pic
3605
test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
3607
# Prepare the list of exported symbols
3608
if test -z "$export_symbols"; then
3609
if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
3610
$show "generating symbol list for \`$libname.la'"
3611
export_symbols="$output_objdir/$libname.exp"
3612
$run $rm $export_symbols
3613
cmds=$export_symbols_cmds
3614
save_ifs="$IFS"; IFS='~'
3615
for cmd in $cmds; do
3618
if len=`expr "X$cmd" : ".*"` &&
3619
test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
3621
$run eval "$cmd" || exit $?
3622
skipped_export=false
3624
# The command line is too long to execute in one step.
3625
$show "using reloadable object file for export list..."
3630
if test -n "$export_symbols_regex"; then
3631
$show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
3632
$run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
3633
$show "$mv \"${export_symbols}T\" \"$export_symbols\""
3634
$run eval '$mv "${export_symbols}T" "$export_symbols"'
3639
if test -n "$export_symbols" && test -n "$include_expsyms"; then
3640
$run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
3644
for test_deplib in $deplibs; do
3645
case " $convenience " in
3646
*" $test_deplib "*) ;;
3648
tmp_deplibs="$tmp_deplibs $test_deplib"
3652
deplibs="$tmp_deplibs"
3654
if test -n "$convenience"; then
3655
if test -n "$whole_archive_flag_spec"; then
3656
save_libobjs=$libobjs
3657
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
3659
gentop="$output_objdir/${outputname}x"
3660
$show "${rm}r $gentop"
3661
$run ${rm}r "$gentop"
3662
$show "$mkdir $gentop"
3663
$run $mkdir "$gentop"
3665
if test "$status" -ne 0 && test ! -d "$gentop"; then
3668
generated="$generated $gentop"
3670
for xlib in $convenience; do
3671
# Extract the objects.
3673
[\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
3674
*) xabs=`pwd`"/$xlib" ;;
3676
xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
3677
xdir="$gentop/$xlib"
3679
$show "${rm}r $xdir"
3681
$show "$mkdir $xdir"
3684
if test "$status" -ne 0 && test ! -d "$xdir"; then
3687
# We will extract separately just the conflicting names and we will no
3688
# longer touch any unique names. It is faster to leave these extract
3689
# automatically by $AR in one run.
3690
$show "(cd $xdir && $AR x $xabs)"
3691
$run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
3692
if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
3695
$echo "$modename: warning: object name conflicts; renaming object files" 1>&2
3696
$echo "$modename: warning: to ensure that they will not overwrite" 1>&2
3697
$AR t "$xabs" | sort | uniq -cd | while read -r count name
3700
while test "$i" -le "$count"
3702
# Put our $i before any first dot (extension)
3703
# Never overwrite any file
3705
while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
3707
name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
3709
$show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
3710
$run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
3716
libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
3721
if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
3722
eval flag=\"$thread_safe_flag_spec\"
3723
linker_flags="$linker_flags $flag"
3726
# Make a backup of the uninstalled library when relinking
3727
if test "$mode" = relink; then
3728
$run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
3731
# Do each of the archive commands.
3732
if test "$module" = yes && test -n "$module_cmds" ; then
3733
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
3734
eval test_cmds=\"$module_expsym_cmds\"
3735
cmds=$module_expsym_cmds
3737
eval test_cmds=\"$module_cmds\"
3741
if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
3742
eval test_cmds=\"$archive_expsym_cmds\"
3743
cmds=$archive_expsym_cmds
3745
eval test_cmds=\"$archive_cmds\"
3750
if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` &&
3751
test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
3754
# The command line is too long to link in one step, link piecewise.
3755
$echo "creating reloadable object files..."
3757
# Save the value of $output and $libobjs because we want to
3758
# use them later. If we have whole_archive_flag_spec, we
3759
# want to use save_libobjs as it was before
3760
# whole_archive_flag_spec was expanded, because we can't
3761
# assume the linker understands whole_archive_flag_spec.
3762
# This may have to be revisited, in case too many
3763
# convenience libraries get linked in and end up exceeding
3765
if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
3766
save_libobjs=$libobjs
3770
# Clear the reloadable object creation command queue and
3771
# initialize k to one.
3778
output=$output_objdir/$save_output-${k}.$objext
3779
# Loop over the list of objects to be linked.
3780
for obj in $save_libobjs
3782
eval test_cmds=\"$reload_cmds $objlist $last_robj\"
3783
if test "X$objlist" = X ||
3784
{ len=`expr "X$test_cmds" : ".*"` &&
3785
test "$len" -le "$max_cmd_len"; }; then
3786
objlist="$objlist $obj"
3788
# The command $test_cmds is almost too long, add a
3789
# command to the queue.
3790
if test "$k" -eq 1 ; then
3791
# The first file doesn't have a previous command to add.
3792
eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
3794
# All subsequent reloadable object files will link in
3795
# the last one created.
3796
eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
3798
last_robj=$output_objdir/$save_output-${k}.$objext
3800
output=$output_objdir/$save_output-${k}.$objext
3805
# Handle the remaining objects by creating one last
3806
# reloadable object file. All subsequent reloadable object
3807
# files will link in the last one created.
3808
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
3809
eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
3811
if ${skipped_export-false}; then
3812
$show "generating symbol list for \`$libname.la'"
3813
export_symbols="$output_objdir/$libname.exp"
3814
$run $rm $export_symbols
3816
# Append the command to create the export file.
3817
eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
3820
# Set up a command to remove the reloadale object files
3821
# after they are used.
3823
while test "$i" -lt "$k"
3826
delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"
3829
$echo "creating a temporary reloadable object file: $output"
3831
# Loop through the commands generated above and execute them.
3832
save_ifs="$IFS"; IFS='~'
3833
for cmd in $concat_cmds; do
3837
$run eval "$cmd" || exit $?
3842
# Restore the value of output.
3845
if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
3846
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
3848
# Expand the library linking commands again to reset the
3849
# value of $libobjs for piecewise linking.
3851
# Do each of the archive commands.
3852
if test "$module" = yes && test -n "$module_cmds" ; then
3853
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
3854
cmds=$module_expsym_cmds
3859
if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
3860
cmds=$archive_expsym_cmds
3866
# Append the command to remove the reloadable object files
3867
# to the just-reset $cmds.
3868
eval cmds=\"\$cmds~\$rm $delfiles\"
3870
save_ifs="$IFS"; IFS='~'
3871
for cmd in $cmds; do
3875
$run eval "$cmd" || exit $?
3879
# Restore the uninstalled library and exit
3880
if test "$mode" = relink; then
3881
$run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
3885
# Create links to the real library.
3886
for linkname in $linknames; do
3887
if test "$realname" != "$linkname"; then
3888
$show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
3889
$run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
3893
# If -module or -export-dynamic was specified, set the dlname.
3894
if test "$module" = yes || test "$export_dynamic" = yes; then
3895
# On all known operating systems, these are identical.
3902
if test -n "$deplibs"; then
3903
$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
3906
if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
3907
$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
3910
if test -n "$rpath"; then
3911
$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
3914
if test -n "$xrpath"; then
3915
$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
3918
if test -n "$vinfo"; then
3919
$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
3922
if test -n "$release"; then
3923
$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
3928
if test -n "$objs$old_deplibs"; then
3929
$echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
3933
obj=`$echo "X$output" | $Xsed -e "$lo2o"`
3941
# Delete the old objects.
3942
$run $rm $obj $libobj
3944
# Objects from convenience libraries. This assumes
3945
# single-version convenience libraries. Whenever we create
3946
# different ones for PIC/non-PIC, this we'll have to duplicate
3950
# reload_cmds runs $LD directly, so let us get rid of
3951
# -Wl from whole_archive_flag_spec
3954
if test -n "$convenience"; then
3955
if test -n "$whole_archive_flag_spec"; then
3956
eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
3958
gentop="$output_objdir/${obj}x"
3959
$show "${rm}r $gentop"
3960
$run ${rm}r "$gentop"
3961
$show "$mkdir $gentop"
3962
$run $mkdir "$gentop"
3964
if test "$status" -ne 0 && test ! -d "$gentop"; then
3967
generated="$generated $gentop"
3969
for xlib in $convenience; do
3970
# Extract the objects.
3972
[\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
3973
*) xabs=`pwd`"/$xlib" ;;
3975
xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
3976
xdir="$gentop/$xlib"
3978
$show "${rm}r $xdir"
3980
$show "$mkdir $xdir"
3983
if test "$status" -ne 0 && test ! -d "$xdir"; then
3986
# We will extract separately just the conflicting names and we will no
3987
# longer touch any unique names. It is faster to leave these extract
3988
# automatically by $AR in one run.
3989
$show "(cd $xdir && $AR x $xabs)"
3990
$run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
3991
if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
3994
$echo "$modename: warning: object name conflicts; renaming object files" 1>&2
3995
$echo "$modename: warning: to ensure that they will not overwrite" 1>&2
3996
$AR t "$xabs" | sort | uniq -cd | while read -r count name
3999
while test "$i" -le "$count"
4001
# Put our $i before any first dot (extension)
4002
# Never overwrite any file
4004
while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
4006
name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
4008
$show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
4009
$run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
4015
reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
4020
# Create the old-style object.
4021
reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
4025
save_ifs="$IFS"; IFS='~'
4026
for cmd in $cmds; do
4030
$run eval "$cmd" || exit $?
4034
# Exit if we aren't doing a library object file.
4035
if test -z "$libobj"; then
4036
if test -n "$gentop"; then
4037
$show "${rm}r $gentop"
4044
if test "$build_libtool_libs" != yes; then
4045
if test -n "$gentop"; then
4046
$show "${rm}r $gentop"
4050
# Create an invalid libtool object if no PIC, so that we don't
4051
# accidentally link it into a program.
4052
# $show "echo timestamp > $libobj"
4053
# $run eval "echo timestamp > $libobj" || exit $?
4057
if test -n "$pic_flag" || test "$pic_mode" != default; then
4058
# Only do commands if we really have different PIC objects.
4059
reload_objs="$libobjs $reload_conv_objs"
4062
save_ifs="$IFS"; IFS='~'
4063
for cmd in $cmds; do
4067
$run eval "$cmd" || exit $?
4072
if test -n "$gentop"; then
4073
$show "${rm}r $gentop"
4082
*cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
4084
if test -n "$vinfo"; then
4085
$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
4088
if test -n "$release"; then
4089
$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
4092
if test "$preload" = yes; then
4093
if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
4094
test "$dlopen_self_static" = unknown; then
4095
$echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
4100
*-*-rhapsody* | *-*-darwin1.[012])
4101
# On Rhapsody replace the C library is the System framework
4102
compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
4103
finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
4109
# Don't allow lazy linking, it breaks C++ global constructors
4110
if test "$tagname" = CXX ; then
4111
compile_command="$compile_command ${wl}-bind_at_load"
4112
finalize_command="$finalize_command ${wl}-bind_at_load"
4117
compile_command="$compile_command $compile_deplibs"
4118
finalize_command="$finalize_command $finalize_deplibs"
4120
if test -n "$rpath$xrpath"; then
4121
# If the user specified any rpath flags, then add them.
4122
for libdir in $rpath $xrpath; do
4123
# This is the magic to use -rpath.
4124
case "$finalize_rpath " in
4126
*) finalize_rpath="$finalize_rpath $libdir" ;;
4131
# Now hardcode the library paths
4134
for libdir in $compile_rpath $finalize_rpath; do
4135
if test -n "$hardcode_libdir_flag_spec"; then
4136
if test -n "$hardcode_libdir_separator"; then
4137
if test -z "$hardcode_libdirs"; then
4138
hardcode_libdirs="$libdir"
4140
# Just accumulate the unique libdirs.
4141
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
4142
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
4145
hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
4150
eval flag=\"$hardcode_libdir_flag_spec\"
4151
rpath="$rpath $flag"
4153
elif test -n "$runpath_var"; then
4154
case "$perm_rpath " in
4156
*) perm_rpath="$perm_rpath $libdir" ;;
4160
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
4161
case :$dllsearchpath: in
4163
*) dllsearchpath="$dllsearchpath:$libdir";;
4168
# Substitute the hardcoded libdirs into the rpath.
4169
if test -n "$hardcode_libdir_separator" &&
4170
test -n "$hardcode_libdirs"; then
4171
libdir="$hardcode_libdirs"
4172
eval rpath=\" $hardcode_libdir_flag_spec\"
4174
compile_rpath="$rpath"
4178
for libdir in $finalize_rpath; do
4179
if test -n "$hardcode_libdir_flag_spec"; then
4180
if test -n "$hardcode_libdir_separator"; then
4181
if test -z "$hardcode_libdirs"; then
4182
hardcode_libdirs="$libdir"
4184
# Just accumulate the unique libdirs.
4185
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
4186
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
4189
hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
4194
eval flag=\"$hardcode_libdir_flag_spec\"
4195
rpath="$rpath $flag"
4197
elif test -n "$runpath_var"; then
4198
case "$finalize_perm_rpath " in
4200
*) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
4204
# Substitute the hardcoded libdirs into the rpath.
4205
if test -n "$hardcode_libdir_separator" &&
4206
test -n "$hardcode_libdirs"; then
4207
libdir="$hardcode_libdirs"
4208
eval rpath=\" $hardcode_libdir_flag_spec\"
4210
finalize_rpath="$rpath"
4212
if test -n "$libobjs" && test "$build_old_libs" = yes; then
4213
# Transform all the library objects into standard objects.
4214
compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
4215
finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
4219
if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
4220
if test -n "$NM" && test -n "$global_symbol_pipe"; then
4221
dlsyms="${outputname}S.c"
4223
$echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
4227
if test -n "$dlsyms"; then
4231
# Discover the nlist of each of the dlfiles.
4232
nlist="$output_objdir/${outputname}.nm"
4234
$show "$rm $nlist ${nlist}S ${nlist}T"
4235
$run $rm "$nlist" "${nlist}S" "${nlist}T"
4237
# Parse the name list into a source file.
4238
$show "creating $output_objdir/$dlsyms"
4240
test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
4241
/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
4242
/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
4248
/* Prevent the only kind of declaration conflicts we can make. */
4249
#define lt_preloaded_symbols some_other_symbol
4251
/* External symbol declarations for the compiler. */\
4254
if test "$dlself" = yes; then
4255
$show "generating symbol list for \`$output'"
4257
test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
4259
# Add our own program objects to the symbol list.
4260
progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
4261
for arg in $progfiles; do
4262
$show "extracting global C symbols from \`$arg'"
4263
$run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
4266
if test -n "$exclude_expsyms"; then
4267
$run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
4268
$run eval '$mv "$nlist"T "$nlist"'
4271
if test -n "$export_symbols_regex"; then
4272
$run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
4273
$run eval '$mv "$nlist"T "$nlist"'
4276
# Prepare the list of exported symbols
4277
if test -z "$export_symbols"; then
4278
export_symbols="$output_objdir/$output.exp"
4279
$run $rm $export_symbols
4280
$run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
4282
$run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
4283
$run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
4284
$run eval 'mv "$nlist"T "$nlist"'
4288
for arg in $dlprefiles; do
4289
$show "extracting global C symbols from \`$arg'"
4290
name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
4291
$run eval '$echo ": $name " >> "$nlist"'
4292
$run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
4295
if test -z "$run"; then
4296
# Make sure we have at least an empty file.
4297
test -f "$nlist" || : > "$nlist"
4299
if test -n "$exclude_expsyms"; then
4300
$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
4301
$mv "$nlist"T "$nlist"
4304
# Try sorting and uniquifying the output.
4305
if grep -v "^: " < "$nlist" |
4306
if sort -k 3 </dev/null >/dev/null 2>&1; then
4311
uniq > "$nlist"S; then
4314
grep -v "^: " < "$nlist" > "$nlist"S
4317
if test -f "$nlist"S; then
4318
eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
4320
$echo '/* NONE */' >> "$output_objdir/$dlsyms"
4323
$echo >> "$output_objdir/$dlsyms" "\
4325
#undef lt_preloaded_symbols
4327
#if defined (__STDC__) && __STDC__
4328
# define lt_ptr void *
4330
# define lt_ptr char *
4334
/* The mapping between symbol names and symbols. */
4339
lt_preloaded_symbols[] =
4343
eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
4345
$echo >> "$output_objdir/$dlsyms" "\
4349
/* This works around a problem in FreeBSD linker */
4350
#ifdef FREEBSD_WORKAROUND
4351
static const void *lt_preloaded_setup() {
4352
return lt_preloaded_symbols;
4362
pic_flag_for_symtable=
4364
# compiling the symbol table file with pic_flag works around
4365
# a FreeBSD bug that causes programs to crash when -lm is
4366
# linked before any other PIC object. But we must not use
4367
# pic_flag when linking with -static. The problem exists in
4368
# FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
4369
*-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
4370
case "$compile_command " in
4372
*) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
4375
case "$compile_command " in
4377
*) pic_flag_for_symtable=" $pic_flag";;
4381
# Now compile the dynamic symbol file.
4382
$show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
4383
$run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
4385
# Clean up the generated files.
4386
$show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
4387
$run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
4389
# Transform the symbol file into the correct name.
4390
compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
4391
finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
4394
$echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
4399
# We keep going just in case the user didn't refer to
4400
# lt_preloaded_symbols. The linker will fail if global_symbol_pipe
4401
# really was required.
4403
# Nullify the symbol file.
4404
compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
4405
finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
4408
if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
4409
# Replace the output file specification.
4410
compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
4411
link_command="$compile_command$compile_rpath"
4413
# We have no uninstalled library dependencies, so finalize right now.
4414
$show "$link_command"
4415
$run eval "$link_command"
4418
# Delete the generated files.
4419
if test -n "$dlsyms"; then
4420
$show "$rm $output_objdir/${outputname}S.${objext}"
4421
$run $rm "$output_objdir/${outputname}S.${objext}"
4427
if test -n "$shlibpath_var"; then
4428
# We should set the shlibpath_var
4430
for dir in $temp_rpath; do
4432
[\\/]* | [A-Za-z]:[\\/]*)
4437
# Relative path: add a thisdir entry.
4438
rpath="$rpath\$thisdir/$dir:"
4445
if test -n "$compile_shlibpath$finalize_shlibpath"; then
4446
compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
4448
if test -n "$finalize_shlibpath"; then
4449
finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
4454
if test -n "$runpath_var"; then
4455
if test -n "$perm_rpath"; then
4456
# We should set the runpath_var.
4458
for dir in $perm_rpath; do
4461
compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
4463
if test -n "$finalize_perm_rpath"; then
4464
# We should set the runpath_var.
4466
for dir in $finalize_perm_rpath; do
4469
finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
4473
if test "$no_install" = yes; then
4474
# We don't need to create a wrapper script.
4475
link_command="$compile_var$compile_command$compile_rpath"
4476
# Replace the output file specification.
4477
link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
4478
# Delete the old output file.
4480
# Link the executable and exit
4481
$show "$link_command"
4482
$run eval "$link_command" || exit $?
4486
if test "$hardcode_action" = relink; then
4487
# Fast installation is not supported
4488
link_command="$compile_var$compile_command$compile_rpath"
4489
relink_command="$finalize_var$finalize_command$finalize_rpath"
4491
$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
4492
$echo "$modename: \`$output' will be relinked during installation" 1>&2
4494
if test "$fast_install" != no; then
4495
link_command="$finalize_var$compile_command$finalize_rpath"
4496
if test "$fast_install" = yes; then
4497
relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
4499
# fast_install is set to needless
4503
link_command="$compile_var$compile_command$compile_rpath"
4504
relink_command="$finalize_var$finalize_command$finalize_rpath"
4508
# Replace the output file specification.
4509
link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
4511
# Delete the old output files.
4512
$run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
4514
$show "$link_command"
4515
$run eval "$link_command" || exit $?
4517
# Now create the wrapper script.
4518
$show "creating $output"
4520
# Quote the relink command for shipping.
4521
if test -n "$relink_command"; then
4522
# Preserve any variables that may affect compiler behavior
4523
for var in $variables_saved_for_relink; do
4524
if eval test -z \"\${$var+set}\"; then
4525
relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
4526
elif eval var_value=\$$var; test -z "$var_value"; then
4527
relink_command="$var=; export $var; $relink_command"
4529
var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
4530
relink_command="$var=\"$var_value\"; export $var; $relink_command"
4533
relink_command="(cd `pwd`; $relink_command)"
4534
relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
4537
# Quote $echo for shipping.
4538
if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
4540
[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
4541
*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
4543
qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
4545
qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
4548
# Only actually do things if our run command is non-null.
4549
if test -z "$run"; then
4550
# win32 will think the script is a binary if it has
4551
# a .exe suffix, so we strip it off here.
4553
*.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
4555
# test for cygwin because mv fails w/o .exe extensions
4559
outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
4563
*cygwin* | *mingw* )
4564
cwrappersource=`$echo ${objdir}/lt-${output}.c`
4565
cwrapper=`$echo ${output}.exe`
4566
$rm $cwrappersource $cwrapper
4567
trap "$rm $cwrappersource $cwrapper; exit 1" 1 2 15
4569
cat > $cwrappersource <<EOF
4571
/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
4572
Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
4574
The $output program cannot be directly executed until all the libtool
4575
libraries that it depends on are installed.
4577
This wrapper executable should never be moved out of the build directory.
4578
If it is, it will not operate correctly.
4580
Currently, it simply execs the wrapper *script* "/bin/sh $output",
4581
but could eventually absorb all of the scripts functionality and
4582
exec $objdir/$outputname directly.
4585
cat >> $cwrappersource<<"EOF"
4593
#if defined(PATH_MAX)
4594
# define LT_PATHMAX PATH_MAX
4595
#elif defined(MAXPATHLEN)
4596
# define LT_PATHMAX MAXPATHLEN
4598
# define LT_PATHMAX 1024
4601
#ifndef DIR_SEPARATOR
4602
#define DIR_SEPARATOR '/'
4605
#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
4607
#define HAVE_DOS_BASED_FILE_SYSTEM
4608
#ifndef DIR_SEPARATOR_2
4609
#define DIR_SEPARATOR_2 '\\'
4613
#ifndef DIR_SEPARATOR_2
4614
# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
4615
#else /* DIR_SEPARATOR_2 */
4616
# define IS_DIR_SEPARATOR(ch) \
4617
(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
4618
#endif /* DIR_SEPARATOR_2 */
4620
#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
4621
#define XFREE(stale) do { \
4622
if (stale) { free ((void *) stale); stale = 0; } \
4625
const char *program_name = NULL;
4627
void * xmalloc (size_t num);
4628
char * xstrdup (const char *string);
4629
char * basename (const char *name);
4630
char * fnqualify(const char *path);
4631
char * strendzap(char *str, const char *pat);
4632
void lt_fatal (const char *message, ...);
4635
main (int argc, char *argv[])
4640
program_name = (char *) xstrdup ((char *) basename (argv[0]));
4641
newargz = XMALLOC(char *, argc+2);
4644
cat >> $cwrappersource <<EOF
4645
newargz[0] = "$SHELL";
4648
cat >> $cwrappersource <<"EOF"
4649
newargz[1] = fnqualify(argv[0]);
4650
/* we know the script has the same name, without the .exe */
4651
/* so make sure newargz[1] doesn't end in .exe */
4652
strendzap(newargz[1],".exe");
4653
for (i = 1; i < argc; i++)
4654
newargz[i+1] = xstrdup(argv[i]);
4655
newargz[argc+1] = NULL;
4658
cat >> $cwrappersource <<EOF
4659
execv("$SHELL",newargz);
4662
cat >> $cwrappersource <<"EOF"
4666
xmalloc (size_t num)
4668
void * p = (void *) malloc (num);
4670
lt_fatal ("Memory exhausted");
4676
xstrdup (const char *string)
4678
return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
4683
basename (const char *name)
4687
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
4688
/* Skip over the disk name in MSDOS pathnames. */
4689
if (isalpha (name[0]) && name[1] == ':')
4693
for (base = name; *name; name++)
4694
if (IS_DIR_SEPARATOR (*name))
4696
return (char *) base;
4700
fnqualify(const char *path)
4704
char tmp[LT_PATHMAX + 1];
4706
assert(path != NULL);
4708
/* Is it qualified already? */
4709
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
4710
if (isalpha (path[0]) && path[1] == ':')
4711
return xstrdup (path);
4713
if (IS_DIR_SEPARATOR (path[0]))
4714
return xstrdup (path);
4716
/* prepend the current directory */
4717
/* doesn't handle '~' */
4718
if (getcwd (tmp, LT_PATHMAX) == NULL)
4719
lt_fatal ("getcwd failed");
4720
size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */
4721
p = XMALLOC(char, size);
4722
sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path);
4727
strendzap(char *str, const char *pat)
4731
assert(str != NULL);
4732
assert(pat != NULL);
4735
patlen = strlen(pat);
4739
str += len - patlen;
4740
if (strcmp(str, pat) == 0)
4747
lt_error_core (int exit_status, const char * mode,
4748
const char * message, va_list ap)
4750
fprintf (stderr, "%s: %s: ", program_name, mode);
4751
vfprintf (stderr, message, ap);
4752
fprintf (stderr, ".\n");
4754
if (exit_status >= 0)
4759
lt_fatal (const char *message, ...)
4762
va_start (ap, message);
4763
lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
4767
# we should really use a build-platform specific compiler
4768
# here, but OTOH, the wrappers (shell script and this C one)
4769
# are only useful if you want to execute the "real" binary.
4770
# Since the "real" binary is built for $host, then this
4771
# wrapper might as well be built for $host, too.
4772
$run $LTCC -s -o $cwrapper $cwrappersource
4776
trap "$rm $output; exit 1" 1 2 15
4781
# $output - temporary wrapper script for $objdir/$outputname
4782
# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
4784
# The $output program cannot be directly executed until all the libtool
4785
# libraries that it depends on are installed.
4787
# This wrapper script should never be moved out of the build directory.
4788
# If it is, it will not operate correctly.
4790
# Sed substitution that helps us do robust quoting. It backslashifies
4791
# metacharacters that are still active within double-quoted strings.
4792
Xsed='${SED} -e 1s/^X//'
4793
sed_quote_subst='$sed_quote_subst'
4795
# The HP-UX ksh and POSIX shell print the target directory to stdout
4797
if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
4799
relink_command=\"$relink_command\"
4801
# This environment variable determines our operation mode.
4802
if test \"\$libtool_install_magic\" = \"$magic\"; then
4803
# install mode needs the following variable:
4804
notinst_deplibs='$notinst_deplibs'
4806
# When we are sourced in execute mode, \$file and \$echo are already set.
4807
if test \"\$libtool_execute_magic\" != \"$magic\"; then
4810
# Make sure echo works.
4811
if test \"X\$1\" = X--no-reexec; then
4812
# Discard the --no-reexec flag, and continue.
4814
elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
4815
# Yippee, \$echo works!
4818
# Restart under the correct shell, and then maybe \$echo will work.
4819
exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
4825
# Find the directory that this script lives in.
4826
thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
4827
test \"x\$thisdir\" = \"x\$file\" && thisdir=.
4829
# Follow symbolic links until we get to the real thisdir.
4830
file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
4831
while test -n \"\$file\"; do
4832
destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
4834
# If there was a directory component, then change thisdir.
4835
if test \"x\$destdir\" != \"x\$file\"; then
4836
case \"\$destdir\" in
4837
[\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
4838
*) thisdir=\"\$thisdir/\$destdir\" ;;
4842
file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
4843
file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
4846
# Try to get the absolute directory name.
4847
absdir=\`cd \"\$thisdir\" && pwd\`
4848
test -n \"\$absdir\" && thisdir=\"\$absdir\"
4851
if test "$fast_install" = yes; then
4853
program=lt-'$outputname'$exeext
4854
progdir=\"\$thisdir/$objdir\"
4856
if test ! -f \"\$progdir/\$program\" || \\
4857
{ file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
4858
test \"X\$file\" != \"X\$progdir/\$program\"; }; then
4860
file=\"\$\$-\$program\"
4862
if test ! -d \"\$progdir\"; then
4863
$mkdir \"\$progdir\"
4865
$rm \"\$progdir/\$file\"
4870
# relink executable if necessary
4871
if test -n \"\$relink_command\"; then
4872
if relink_command_output=\`eval \$relink_command 2>&1\`; then :
4874
$echo \"\$relink_command_output\" >&2
4875
$rm \"\$progdir/\$file\"
4880
$mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
4881
{ $rm \"\$progdir/\$program\";
4882
$mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
4883
$rm \"\$progdir/\$file\"
4887
program='$outputname'
4888
progdir=\"\$thisdir/$objdir\"
4894
if test -f \"\$progdir/\$program\"; then"
4896
# Export our shlibpath_var if we have one.
4897
if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
4899
# Add our own library path to $shlibpath_var
4900
$shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
4902
# Some systems cannot cope with colon-terminated $shlibpath_var
4903
# The second colon is a workaround for a bug in BeOS R4 sed
4904
$shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
4906
export $shlibpath_var
4910
# fixup the dll searchpath if we need to.
4911
if test -n "$dllsearchpath"; then
4913
# Add the dll search path components to the executable PATH
4914
PATH=$dllsearchpath:\$PATH
4919
if test \"\$libtool_execute_magic\" != \"$magic\"; then
4920
# Run the actual program with our arguments.
4923
# Backslashes separate directories on plain windows
4924
*-*-mingw | *-*-os2*)
4926
exec \$progdir\\\\\$program \${1+\"\$@\"}
4932
exec \$progdir/\$program \${1+\"\$@\"}
4937
\$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
4941
# The program doesn't exist.
4942
\$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
4943
\$echo \"This script is just a wrapper for \$program.\" 1>&2
4944
$echo \"See the $PACKAGE documentation for more information.\" 1>&2
4955
# See if we need to build an old-fashioned archive.
4956
for oldlib in $oldlibs; do
4958
if test "$build_libtool_libs" = convenience; then
4959
oldobjs="$libobjs_save"
4960
addlibs="$convenience"
4961
build_libtool_libs=no
4963
if test "$build_libtool_libs" = module; then
4964
oldobjs="$libobjs_save"
4965
build_libtool_libs=no
4967
oldobjs="$old_deplibs $non_pic_objects"
4969
addlibs="$old_convenience"
4972
if test -n "$addlibs"; then
4973
gentop="$output_objdir/${outputname}x"
4974
$show "${rm}r $gentop"
4975
$run ${rm}r "$gentop"
4976
$show "$mkdir $gentop"
4977
$run $mkdir "$gentop"
4979
if test "$status" -ne 0 && test ! -d "$gentop"; then
4982
generated="$generated $gentop"
4984
# Add in members from convenience archives.
4985
for xlib in $addlibs; do
4986
# Extract the objects.
4988
[\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
4989
*) xabs=`pwd`"/$xlib" ;;
4991
xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
4992
xdir="$gentop/$xlib"
4994
$show "${rm}r $xdir"
4996
$show "$mkdir $xdir"
4999
if test "$status" -ne 0 && test ! -d "$xdir"; then
5002
# We will extract separately just the conflicting names and we will no
5003
# longer touch any unique names. It is faster to leave these extract
5004
# automatically by $AR in one run.
5005
$show "(cd $xdir && $AR x $xabs)"
5006
$run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
5007
if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
5010
$echo "$modename: warning: object name conflicts; renaming object files" 1>&2
5011
$echo "$modename: warning: to ensure that they will not overwrite" 1>&2
5012
$AR t "$xabs" | sort | uniq -cd | while read -r count name
5015
while test "$i" -le "$count"
5017
# Put our $i before any first dot (extension)
5018
# Never overwrite any file
5020
while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
5022
name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
5024
$show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
5025
$run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
5031
oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
5035
# Do each command in the archive commands.
5036
if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
5037
cmds=$old_archive_from_new_cmds
5039
eval cmds=\"$old_archive_cmds\"
5041
if len=`expr "X$cmds" : ".*"` &&
5042
test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
5043
cmds=$old_archive_cmds
5045
# the command line is too long to link in one step, link in parts
5046
$echo "using piecewise archive linking..."
5051
save_oldobjs=$oldobjs
5052
# GNU ar 2.10+ was changed to match POSIX; thus no paths are
5053
# encoded into archives. This makes 'ar r' malfunction in
5054
# this piecewise linking case whenever conflicting object
5055
# names appear in distinct ar calls; check, warn and compensate.
5056
if (for obj in $save_oldobjs
5058
$echo "X$obj" | $Xsed -e 's%^.*/%%'
5059
done | sort | sort -uc >/dev/null 2>&1); then
5062
$echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2
5063
$echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2
5066
# Is there a better way of finding the last object in the list?
5067
for obj in $save_oldobjs
5071
for obj in $save_oldobjs
5073
oldobjs="$objlist $obj"
5074
objlist="$objlist $obj"
5075
eval test_cmds=\"$old_archive_cmds\"
5076
if len=`expr "X$test_cmds" : ".*"` &&
5077
test "$len" -le "$max_cmd_len"; then
5080
# the above command should be used before it gets too long
5082
if test "$obj" = "$last_oldobj" ; then
5085
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
5086
eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
5092
if test "X$oldobjs" = "X" ; then
5093
eval cmds=\"\$concat_cmds\"
5095
eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
5099
save_ifs="$IFS"; IFS='~'
5100
for cmd in $cmds; do
5104
$run eval "$cmd" || exit $?
5109
if test -n "$generated"; then
5110
$show "${rm}r$generated"
5111
$run ${rm}r$generated
5114
# Now create the libtool archive.
5118
test "$build_old_libs" = yes && old_library="$libname.$libext"
5119
$show "creating $output"
5121
# Preserve any variables that may affect compiler behavior
5122
for var in $variables_saved_for_relink; do
5123
if eval test -z \"\${$var+set}\"; then
5124
relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
5125
elif eval var_value=\$$var; test -z "$var_value"; then
5126
relink_command="$var=; export $var; $relink_command"
5128
var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
5129
relink_command="$var=\"$var_value\"; export $var; $relink_command"
5132
# Quote the link command for shipping.
5133
relink_command="(cd `pwd`; $SHELL $0 $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
5134
relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
5135
if test "$hardcode_automatic" = yes ; then
5138
# Only create the output if not a dry run.
5139
if test -z "$run"; then
5140
for installed in no yes; do
5141
if test "$installed" = yes; then
5142
if test -z "$install_libdir"; then
5145
output="$output_objdir/$outputname"i
5146
# Replace all uninstalled libtool libraries with the installed ones
5148
for deplib in $dependency_libs; do
5151
name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
5152
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
5153
if test -z "$libdir"; then
5154
$echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
5157
newdependency_libs="$newdependency_libs $libdir/$name"
5159
*) newdependency_libs="$newdependency_libs $deplib" ;;
5162
dependency_libs="$newdependency_libs"
5164
for lib in $dlfiles; do
5165
name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
5166
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
5167
if test -z "$libdir"; then
5168
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
5171
newdlfiles="$newdlfiles $libdir/$name"
5173
dlfiles="$newdlfiles"
5175
for lib in $dlprefiles; do
5176
name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
5177
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
5178
if test -z "$libdir"; then
5179
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
5182
newdlprefiles="$newdlprefiles $libdir/$name"
5184
dlprefiles="$newdlprefiles"
5187
for lib in $dlfiles; do
5189
[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
5190
*) abs=`pwd`"/$lib" ;;
5192
newdlfiles="$newdlfiles $abs"
5194
dlfiles="$newdlfiles"
5196
for lib in $dlprefiles; do
5198
[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
5199
*) abs=`pwd`"/$lib" ;;
5201
newdlprefiles="$newdlprefiles $abs"
5203
dlprefiles="$newdlprefiles"
5206
# place dlname in correct position for cygwin
5208
case $host,$output,$installed,$module,$dlname in
5209
*cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
5212
# $outputname - a libtool library file
5213
# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
5215
# Please DO NOT delete this file!
5216
# It is necessary for linking the library.
5218
# The name that we can dlopen(3).
5221
# Names of this library.
5222
library_names='$library_names'
5224
# The name of the static archive.
5225
old_library='$old_library'
5227
# Libraries that this one depends upon.
5228
dependency_libs='$dependency_libs'
5230
# Version information for $libname.
5235
# Is this an already installed library?
5236
installed=$installed
5238
# Should we warn about portability when linking against -modules?
5239
shouldnotlink=$module
5241
# Files to dlopen/dlpreopen
5243
dlpreopen='$dlprefiles'
5245
# Directory that this library needs to be installed in:
5246
libdir='$install_libdir'"
5247
if test "$installed" = no && test "$need_relink" = yes; then
5249
relink_command=\"$relink_command\""
5254
# Do a symbolic link so that the libtool archive can be found in
5255
# LD_LIBRARY_PATH before the program is installed.
5256
$show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
5257
$run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
5263
# libtool install mode
5265
modename="$modename: install"
5267
# There may be an optional sh(1) argument at the beginning of
5268
# install_prog (especially on Windows NT).
5269
if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
5270
# Allow the use of GNU shtool's install command.
5271
$echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
5272
# Aesthetically quote it.
5273
arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
5275
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
5279
install_prog="$arg "
5287
# The real first argument should be the name of the installation program.
5288
# Aesthetically quote it.
5289
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
5291
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
5295
install_prog="$install_prog$arg"
5297
# We need to accept at least all the BSD install flags.
5307
if test -n "$dest"; then
5308
files="$files $dest"
5326
# If the previous option needed an argument, then skip it.
5327
if test -n "$prev"; then
5336
# Aesthetically quote the argument.
5337
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
5339
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
5343
install_prog="$install_prog $arg"
5346
if test -z "$install_prog"; then
5347
$echo "$modename: you must specify an install program" 1>&2
5352
if test -n "$prev"; then
5353
$echo "$modename: the \`$prev' option requires an argument" 1>&2
5358
if test -z "$files"; then
5359
if test -z "$dest"; then
5360
$echo "$modename: no file or destination specified" 1>&2
5362
$echo "$modename: you must specify a destination" 1>&2
5368
# Strip any trailing slash from the destination.
5369
dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
5371
# Check to see that the destination is a directory.
5372
test -d "$dest" && isdir=yes
5373
if test "$isdir" = yes; then
5377
destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
5378
test "X$destdir" = "X$dest" && destdir=.
5379
destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
5381
# Not a directory, so check to see that there is only one file specified.
5383
if test "$#" -gt 2; then
5384
$echo "$modename: \`$dest' is not a directory" 1>&2
5390
[\\/]* | [A-Za-z]:[\\/]*) ;;
5392
for file in $files; do
5396
$echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
5405
# This variable tells wrapper scripts just to set variables rather
5406
# than running their programs.
5407
libtool_install_magic="$magic"
5412
for file in $files; do
5414
# Do each installation.
5417
# Do the static libraries later.
5418
staticlibs="$staticlibs $file"
5422
# Check to see that this really is a libtool archive.
5423
if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
5425
$echo "$modename: \`$file' is not a valid libtool archive" 1>&2
5433
# If there is no directory component, then add one.
5435
*/* | *\\*) . $file ;;
5439
# Add the libdir to current_libdirs if it is the destination.
5440
if test "X$destdir" = "X$libdir"; then
5441
case "$current_libdirs " in
5443
*) current_libdirs="$current_libdirs $libdir" ;;
5446
# Note the libdir as a future libdir.
5447
case "$future_libdirs " in
5449
*) future_libdirs="$future_libdirs $libdir" ;;
5453
dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
5454
test "X$dir" = "X$file/" && dir=
5457
if test -n "$relink_command"; then
5458
# Determine the prefix the user has applied to our future dir.
5459
inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
5461
# Don't allow the user to place us outside of our expected
5462
# location b/c this prevents finding dependent libraries that
5463
# are installed to the same prefix.
5464
# At present, this check doesn't affect windows .dll's that
5465
# are installed into $libdir/../bin (currently, that works fine)
5466
# but it's something to keep an eye on.
5467
if test "$inst_prefix_dir" = "$destdir"; then
5468
$echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
5472
if test -n "$inst_prefix_dir"; then
5473
# Stick the inst_prefix_dir data into the link command.
5474
relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
5476
relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
5479
$echo "$modename: warning: relinking \`$file'" 1>&2
5480
$show "$relink_command"
5481
if $run eval "$relink_command"; then :
5483
$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
5488
# See the names of the shared library.
5489
set dummy $library_names
5490
if test -n "$2"; then
5496
test -n "$relink_command" && srcname="$realname"T
5498
# Install the shared library and build the symlinks.
5499
$show "$install_prog $dir/$srcname $destdir/$realname"
5500
$run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
5501
if test -n "$stripme" && test -n "$striplib"; then
5502
$show "$striplib $destdir/$realname"
5503
$run eval "$striplib $destdir/$realname" || exit $?
5506
if test "$#" -gt 0; then
5507
# Delete the old symlinks, and create new ones.
5510
if test "$linkname" != "$realname"; then
5511
$show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
5512
$run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
5517
# Do each command in the postinstall commands.
5518
lib="$destdir/$realname"
5519
cmds=$postinstall_cmds
5520
save_ifs="$IFS"; IFS='~'
5521
for cmd in $cmds; do
5525
$run eval "$cmd" || exit $?
5530
# Install the pseudo-library for information purposes.
5531
name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
5532
instname="$dir/$name"i
5533
$show "$install_prog $instname $destdir/$name"
5534
$run eval "$install_prog $instname $destdir/$name" || exit $?
5536
# Maybe install the static library, too.
5537
test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
5541
# Install (i.e. copy) a libtool object.
5543
# Figure out destination file name, if it wasn't already specified.
5544
if test -n "$destname"; then
5545
destfile="$destdir/$destname"
5547
destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
5548
destfile="$destdir/$destfile"
5551
# Deduce the name of the destination old-style object file.
5554
staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
5557
staticdest="$destfile"
5561
$echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
5567
# Install the libtool object if requested.
5568
if test -n "$destfile"; then
5569
$show "$install_prog $file $destfile"
5570
$run eval "$install_prog $file $destfile" || exit $?
5573
# Install the old object if enabled.
5574
if test "$build_old_libs" = yes; then
5575
# Deduce the name of the old-style object file.
5576
staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
5578
$show "$install_prog $staticobj $staticdest"
5579
$run eval "$install_prog \$staticobj \$staticdest" || exit $?
5585
# Figure out destination file name, if it wasn't already specified.
5586
if test -n "$destname"; then
5587
destfile="$destdir/$destname"
5589
destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
5590
destfile="$destdir/$destfile"
5593
# If the file is missing, and there is a .exe on the end, strip it
5594
# because it is most likely a libtool script we actually want to
5599
if test ! -f "$file"; then
5600
file=`$echo $file|${SED} 's,.exe$,,'`
5606
# Do a test to see if this is really a libtool program.
5609
wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
5615
if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
5619
# To insure that "foo" is sourced, and not "foo.exe",
5620
# finese the cygwin/MSYS system by explicitly sourcing "foo."
5621
# which disallows the automatic-append-.exe behavior.
5623
*cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
5624
*) wrapperdot=${wrapper} ;;
5626
# If there is no directory component, then add one.
5628
*/* | *\\*) . ${wrapperdot} ;;
5629
*) . ./${wrapperdot} ;;
5632
# Check the variables that should have been set.
5633
if test -z "$notinst_deplibs"; then
5634
$echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
5639
for lib in $notinst_deplibs; do
5640
# Check to see that each library is installed.
5642
if test -f "$lib"; then
5643
# If there is no directory component, then add one.
5645
*/* | *\\*) . $lib ;;
5649
libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
5650
if test -n "$libdir" && test ! -f "$libfile"; then
5651
$echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
5657
# To insure that "foo" is sourced, and not "foo.exe",
5658
# finese the cygwin/MSYS system by explicitly sourcing "foo."
5659
# which disallows the automatic-append-.exe behavior.
5661
*cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
5662
*) wrapperdot=${wrapper} ;;
5664
# If there is no directory component, then add one.
5666
*/* | *\\*) . ${wrapperdot} ;;
5667
*) . ./${wrapperdot} ;;
5671
if test "$fast_install" = no && test -n "$relink_command"; then
5672
if test "$finalize" = yes && test -z "$run"; then
5674
test -n "$TMPDIR" && tmpdir="$TMPDIR"
5675
tmpdir="$tmpdir/libtool-$$"
5676
if $mkdir "$tmpdir" && chmod 700 "$tmpdir"; then :
5678
$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
5681
file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
5682
outputname="$tmpdir/$file"
5683
# Replace the output file specification.
5684
relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
5686
$show "$relink_command"
5687
if $run eval "$relink_command"; then :
5689
$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
5695
$echo "$modename: warning: cannot relink \`$file'" 1>&2
5698
# Install the binary that we compiled earlier.
5699
file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
5703
# remove .exe since cygwin /usr/bin/install will append another
5705
case $install_prog,$host in
5706
*/usr/bin/install*,*cygwin*)
5707
case $file:$destfile in
5712
destfile=$destfile.exe
5715
destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
5720
$show "$install_prog$stripme $file $destfile"
5721
$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
5722
test -n "$outputname" && ${rm}r "$tmpdir"
5727
for file in $staticlibs; do
5728
name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
5730
# Set up the ranlib parameters.
5731
oldlib="$destdir/$name"
5733
$show "$install_prog $file $oldlib"
5734
$run eval "$install_prog \$file \$oldlib" || exit $?
5736
if test -n "$stripme" && test -n "$old_striplib"; then
5737
$show "$old_striplib $oldlib"
5738
$run eval "$old_striplib $oldlib" || exit $?
5741
# Do each command in the postinstall commands.
5742
cmds=$old_postinstall_cmds
5743
save_ifs="$IFS"; IFS='~'
5744
for cmd in $cmds; do
5748
$run eval "$cmd" || exit $?
5753
if test -n "$future_libdirs"; then
5754
$echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
5757
if test -n "$current_libdirs"; then
5758
# Maybe just do a dry run.
5759
test -n "$run" && current_libdirs=" -n$current_libdirs"
5760
exec_cmd='$SHELL $0 $preserve_args --finish$current_libdirs'
5766
# libtool finish mode
5768
modename="$modename: finish"
5772
if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
5775
libdirs="$libdirs $dir"
5778
for libdir in $libdirs; do
5779
if test -n "$finish_cmds"; then
5780
# Do each command in the finish commands.
5782
save_ifs="$IFS"; IFS='~'
5783
for cmd in $cmds; do
5787
$run eval "$cmd" || admincmds="$admincmds
5792
if test -n "$finish_eval"; then
5793
# Do the single finish_eval.
5794
eval cmds=\"$finish_eval\"
5795
$run eval "$cmds" || admincmds="$admincmds
5801
# Exit here if they wanted silent mode.
5802
test "$show" = : && exit 0
5804
$echo "----------------------------------------------------------------------"
5805
$echo "Libraries have been installed in:"
5806
for libdir in $libdirs; do
5810
$echo "If you ever happen to want to link against installed libraries"
5811
$echo "in a given directory, LIBDIR, you must either use libtool, and"
5812
$echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
5813
$echo "flag during linking and do at least one of the following:"
5814
if test -n "$shlibpath_var"; then
5815
$echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
5816
$echo " during execution"
5818
if test -n "$runpath_var"; then
5819
$echo " - add LIBDIR to the \`$runpath_var' environment variable"
5820
$echo " during linking"
5822
if test -n "$hardcode_libdir_flag_spec"; then
5824
eval flag=\"$hardcode_libdir_flag_spec\"
5826
$echo " - use the \`$flag' linker flag"
5828
if test -n "$admincmds"; then
5829
$echo " - have your system administrator run these commands:$admincmds"
5831
if test -f /etc/ld.so.conf; then
5832
$echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
5835
$echo "See any operating system documentation about shared libraries for"
5836
$echo "more information, such as the ld(1) and ld.so(8) manual pages."
5837
$echo "----------------------------------------------------------------------"
5841
# libtool execute mode
5843
modename="$modename: execute"
5845
# The first argument is the command name.
5847
if test -z "$cmd"; then
5848
$echo "$modename: you must specify a COMMAND" 1>&2
5853
# Handle -dlopen flags immediately.
5854
for file in $execute_dlfiles; do
5855
if test ! -f "$file"; then
5856
$echo "$modename: \`$file' is not a file" 1>&2
5864
# Check to see that this really is a libtool archive.
5865
if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
5867
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
5872
# Read the libtool library.
5876
# If there is no directory component, then add one.
5878
*/* | *\\*) . $file ;;
5882
# Skip this library if it cannot be dlopened.
5883
if test -z "$dlname"; then
5884
# Warn if it was a shared library.
5885
test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
5889
dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
5890
test "X$dir" = "X$file" && dir=.
5892
if test -f "$dir/$objdir/$dlname"; then
5895
$echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
5901
# Just add the directory containing the .lo file.
5902
dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
5903
test "X$dir" = "X$file" && dir=.
5907
$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
5912
# Get the absolute pathname.
5913
absdir=`cd "$dir" && pwd`
5914
test -n "$absdir" && dir="$absdir"
5916
# Now add the directory to shlibpath_var.
5917
if eval "test -z \"\$$shlibpath_var\""; then
5918
eval "$shlibpath_var=\"\$dir\""
5920
eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
5924
# This variable tells wrapper scripts just to set shlibpath_var
5925
# rather than running their programs.
5926
libtool_execute_magic="$magic"
5928
# Check if any of the arguments is a wrapper script.
5935
# Do a test to see if this is really a libtool program.
5936
if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
5937
# If there is no directory component, then add one.
5939
*/* | *\\*) . $file ;;
5943
# Transform arg to wrapped name.
5944
file="$progdir/$program"
5948
# Quote arguments (to preserve shell metacharacters).
5949
file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
5950
args="$args \"$file\""
5953
if test -z "$run"; then
5954
if test -n "$shlibpath_var"; then
5955
# Export the shlibpath_var.
5956
eval "export $shlibpath_var"
5959
# Restore saved environment variables
5960
if test "${save_LC_ALL+set}" = set; then
5961
LC_ALL="$save_LC_ALL"; export LC_ALL
5963
if test "${save_LANG+set}" = set; then
5964
LANG="$save_LANG"; export LANG
5967
# Now prepare to actually exec the command.
5968
exec_cmd="\$cmd$args"
5970
# Display what would be done.
5971
if test -n "$shlibpath_var"; then
5972
eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
5973
$echo "export $shlibpath_var"
5980
# libtool clean and uninstall mode
5982
modename="$modename: $mode"
5988
# This variable tells wrapper scripts just to set variables rather
5989
# than running their programs.
5990
libtool_install_magic="$magic"
5995
-f) rm="$rm $arg"; rmforce=yes ;;
5996
-*) rm="$rm $arg" ;;
5997
*) files="$files $arg" ;;
6001
if test -z "$rm"; then
6002
$echo "$modename: you must specify an RM program" 1>&2
6009
origobjdir="$objdir"
6010
for file in $files; do
6011
dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
6012
if test "X$dir" = "X$file"; then
6014
objdir="$origobjdir"
6016
objdir="$dir/$origobjdir"
6018
name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
6019
test "$mode" = uninstall && objdir="$dir"
6021
# Remember objdir for removal later, being careful to avoid duplicates
6022
if test "$mode" = clean; then
6025
*) rmdirs="$rmdirs $objdir" ;;
6029
# Don't error if the file doesn't exist and rm -f was used.
6030
if (test -L "$file") >/dev/null 2>&1 \
6031
|| (test -h "$file") >/dev/null 2>&1 \
6032
|| test -f "$file"; then
6034
elif test -d "$file"; then
6037
elif test "$rmforce" = yes; then
6045
# Possibly a libtool archive, so verify it.
6046
if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
6049
# Delete the libtool libraries and symlinks.
6050
for n in $library_names; do
6051
rmfiles="$rmfiles $objdir/$n"
6053
test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
6054
test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
6056
if test "$mode" = uninstall; then
6057
if test -n "$library_names"; then
6058
# Do each command in the postuninstall commands.
6059
cmds=$postuninstall_cmds
6060
save_ifs="$IFS"; IFS='~'
6061
for cmd in $cmds; do
6066
if test "$?" -ne 0 && test "$rmforce" != yes; then
6073
if test -n "$old_library"; then
6074
# Do each command in the old_postuninstall commands.
6075
cmds=$old_postuninstall_cmds
6076
save_ifs="$IFS"; IFS='~'
6077
for cmd in $cmds; do
6082
if test "$?" -ne 0 && test "$rmforce" != yes; then
6088
# FIXME: should reinstall the best remaining shared library.
6094
# Possibly a libtool object, so verify it.
6095
if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
6100
# Add PIC object to the list of files to remove.
6101
if test -n "$pic_object" \
6102
&& test "$pic_object" != none; then
6103
rmfiles="$rmfiles $dir/$pic_object"
6106
# Add non-PIC object to the list of files to remove.
6107
if test -n "$non_pic_object" \
6108
&& test "$non_pic_object" != none; then
6109
rmfiles="$rmfiles $dir/$non_pic_object"
6115
if test "$mode" = clean ; then
6119
file=`$echo $file|${SED} 's,.exe$,,'`
6120
noexename=`$echo $name|${SED} 's,.exe$,,'`
6121
# $file with .exe has already been added to rmfiles,
6122
# add $file without .exe
6123
rmfiles="$rmfiles $file"
6126
# Do a test to see if this is a libtool program.
6127
if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
6131
# note $name still contains .exe if it was in $file originally
6132
# as does the version of $file that was added into $rmfiles
6133
rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
6134
if test "$fast_install" = yes && test -n "$relink_command"; then
6135
rmfiles="$rmfiles $objdir/lt-$name"
6137
if test "X$noexename" != "X$name" ; then
6138
rmfiles="$rmfiles $objdir/lt-${noexename}.c"
6144
$show "$rm $rmfiles"
6145
$run $rm $rmfiles || exit_status=1
6147
objdir="$origobjdir"
6149
# Try to remove the ${objdir}s in the directories where we deleted files
6150
for dir in $rmdirs; do
6151
if test -d "$dir"; then
6153
$run rmdir $dir >/dev/null 2>&1
6161
$echo "$modename: you must specify a MODE" 1>&2
6162
$echo "$generic_help" 1>&2
6167
if test -z "$exec_cmd"; then
6168
$echo "$modename: invalid operation mode \`$mode'" 1>&2
6169
$echo "$generic_help" 1>&2
6172
fi # test -z "$show_help"
6174
if test -n "$exec_cmd"; then
6179
# We need to display help for each of the modes.
6182
"Usage: $modename [OPTION]... [MODE-ARG]...
6184
Provide generalized library-building support services.
6186
--config show all configuration variables
6187
--debug enable verbose shell tracing
6188
-n, --dry-run display commands without modifying any files
6189
--features display basic configuration information and exit
6190
--finish same as \`--mode=finish'
6191
--help display this help message and exit
6192
--mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
6193
--quiet same as \`--silent'
6194
--silent don't print informational messages
6195
--tag=TAG use configuration variables from tag TAG
6196
--version print version information
6198
MODE must be one of the following:
6200
clean remove files from the build directory
6201
compile compile a source file into a libtool object
6202
execute automatically set library path, then run a program
6203
finish complete the installation of libtool libraries
6204
install install libraries or executables
6205
link create a library or an executable
6206
uninstall remove libraries from an installed directory
6208
MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
6209
a more detailed description of MODE.
6211
Report bugs to <bug-libtool@gnu.org>."
6217
"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
6219
Remove files from the build directory.
6221
RM is the name of the program to use to delete files associated with each FILE
6222
(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
6225
If FILE is a libtool library, object or program, all the files associated
6226
with it are deleted. Otherwise, only FILE itself is deleted using RM."
6231
"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
6233
Compile a source file into a libtool library object.
6235
This mode accepts the following additional options:
6237
-o OUTPUT-FILE set the output file name to OUTPUT-FILE
6238
-prefer-pic try to building PIC objects only
6239
-prefer-non-pic try to building non-PIC objects only
6240
-static always build a \`.o' file suitable for static linking
6242
COMPILE-COMMAND is a command to be used in creating a \`standard' object file
6243
from the given SOURCEFILE.
6245
The output file name is determined by removing the directory component from
6246
SOURCEFILE, then substituting the C source code suffix \`.c' with the
6247
library object suffix, \`.lo'."
6252
"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
6254
Automatically set library path, then run a program.
6256
This mode accepts the following additional options:
6258
-dlopen FILE add the directory containing FILE to the library path
6260
This mode sets the library path environment variable according to \`-dlopen'
6263
If any of the ARGS are libtool executable wrappers, then they are translated
6264
into their corresponding uninstalled binary, and any of their required library
6265
directories are added to the library path.
6267
Then, COMMAND is executed, with ARGS as arguments."
6272
"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
6274
Complete the installation of libtool libraries.
6276
Each LIBDIR is a directory that contains libtool libraries.
6278
The commands that this mode executes may require superuser privileges. Use
6279
the \`--dry-run' option if you just want to see what would be executed."
6284
"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
6286
Install executables or libraries.
6288
INSTALL-COMMAND is the installation command. The first component should be
6289
either the \`install' or \`cp' program.
6291
The rest of the components are interpreted as arguments to that command (only
6292
BSD-compatible install options are recognized)."
6297
"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
6299
Link object files or libraries together to form another library, or to
6300
create an executable program.
6302
LINK-COMMAND is a command using the C compiler that you would use to create
6303
a program from several object files.
6305
The following components of LINK-COMMAND are treated specially:
6307
-all-static do not do any dynamic linking at all
6308
-avoid-version do not add a version suffix if possible
6309
-dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
6310
-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
6311
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
6312
-export-symbols SYMFILE
6313
try to export only the symbols listed in SYMFILE
6314
-export-symbols-regex REGEX
6315
try to export only the symbols matching REGEX
6316
-LLIBDIR search LIBDIR for required installed libraries
6317
-lNAME OUTPUT-FILE requires the installed library libNAME
6318
-module build a library that can dlopened
6319
-no-fast-install disable the fast-install mode
6320
-no-install link a not-installable executable
6321
-no-undefined declare that a library does not refer to external symbols
6322
-o OUTPUT-FILE create OUTPUT-FILE from the specified objects
6323
-objectlist FILE Use a list of object files found in FILE to specify objects
6324
-precious-files-regex REGEX
6325
don't remove output files matching REGEX
6326
-release RELEASE specify package release information
6327
-rpath LIBDIR the created library will eventually be installed in LIBDIR
6328
-R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
6329
-static do not do any dynamic linking of libtool libraries
6330
-version-info CURRENT[:REVISION[:AGE]]
6331
specify library version info [each variable defaults to 0]
6333
All other options (arguments beginning with \`-') are ignored.
6335
Every other argument is treated as a filename. Files ending in \`.la' are
6336
treated as uninstalled libtool libraries, other files are standard or library
6339
If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
6340
only library objects (\`.lo' files) may be specified, and \`-rpath' is
6341
required, except when creating a convenience library.
6343
If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
6344
using \`ar' and \`ranlib', or on Windows using \`lib'.
6346
If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
6347
is created, otherwise an executable program is created."
6352
"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
6354
Remove libraries from an installation directory.
6356
RM is the name of the program to use to delete files associated with each FILE
6357
(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
6360
If FILE is a libtool library, all the files associated with it are deleted.
6361
Otherwise, only FILE itself is deleted using RM."
6365
$echo "$modename: invalid operation mode \`$mode'" 1>&2
6372
$echo "Try \`$modename --help' for more information about other modes."
6376
# The TAGs below are defined such that we never get into a situation
6377
# in which we disable both kinds of libraries. Given conflicting
6378
# choices, we go for a static library, that is the most portable,
6379
# since we can't tell whether shared libraries were disabled because
6380
# the user asked for that or because the platform doesn't support
6381
# them. This is particularly important on AIX, because we don't
6382
# support having both static and shared libraries enabled at the same
6383
# time on that platform, so we default to a shared-only configuration.
6384
# If a disable-shared tag is given, we'll fallback to a static-only
6385
# configuration. But we'll never go from static-only to shared-only.
6387
# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
6388
build_libtool_libs=no
6390
# ### END LIBTOOL TAG CONFIG: disable-shared
6392
# ### BEGIN LIBTOOL TAG CONFIG: disable-static
6393
build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac`
6394
# ### END LIBTOOL TAG CONFIG: disable-static