6
; This is the default settings file for new PHP installations.
7
; By default, PHP installs itself with a configuration suitable for
8
; development purposes, and *NOT* for production purposes.
9
; For several security-oriented considerations that should be taken
10
; before going online with your site, please consult php.ini-recommended
11
; and http://php.net/manual/en/security.php.
17
; This file controls many aspects of PHP's behavior. In order for PHP to
18
; read it, it must be named 'php.ini'. PHP looks for it in the current
19
; working directory, in the path designated by the environment variable
20
; PHPRC, and in the path that was defined in compile time (in that order).
21
; Under Windows, the compile-time path is the Windows directory. The
22
; path in which the php.ini file is looked for can be overridden using
23
; the -c argument in command line mode.
25
; The syntax of the file is extremely simple. Whitespace and Lines
26
; beginning with a semicolon are silently ignored (as you probably guessed).
27
; Section headers (e.g. [Foo]) are also silently ignored, even though
28
; they might mean something in the future.
30
; Directives are specified using the following syntax:
32
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
34
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
35
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
36
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
38
; Expressions in the INI file are limited to bitwise operators and parentheses:
44
; Boolean flags can be turned on using the values 1, On, True or Yes.
45
; They can be turned off using the values 0, Off, False or No.
47
; An empty string can be denoted by simply not writing anything after the equal
48
; sign, or by using the None keyword:
50
; foo = ; sets foo to an empty string
51
; foo = none ; sets foo to an empty string
52
; foo = "none" ; sets foo to the string 'none'
54
; If you use constants in your value, and these constants belong to a
55
; dynamically loaded extension (either a PHP extension or a Zend extension),
56
; you may only use these constants *after* the line that loads the extension.
62
; All the values in the php.ini-dist file correspond to the builtin
63
; defaults (that is, if no php.ini is used, or if you delete these lines,
64
; the builtin defaults will be identical).
71
; Enable the PHP scripting language engine under Apache.
74
; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
75
zend.ze1_compatibility_mode = Off
77
; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
78
; NOTE: Using short tags should be avoided when developing applications or
79
; libraries that are meant for redistribution, or deployment on PHP
80
; servers which are not under your control, because short tags may not
81
; be supported on the target server. For portable, redistributable code,
82
; be sure not to use short tags.
85
; Allow ASP-style <% %> tags.
88
; The number of significant digits displayed in floating point numbers.
91
; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
94
; Output buffering allows you to send header lines (including cookies) even
95
; after you send body content, at the price of slowing PHP's output layer a
96
; bit. You can enable output buffering during runtime by calling the output
97
; buffering functions. You can also enable output buffering for all files by
98
; setting this directive to On. If you wish to limit the size of the buffer
99
; to a certain size - you can use a maximum number of bytes instead of 'On', as
100
; a value for this directive (e.g., output_buffering=4096).
101
output_buffering = Off
103
; You can redirect all of the output of your scripts to a function. For
104
; example, if you set output_handler to "mb_output_handler", character
105
; encoding will be transparently converted to the specified encoding.
106
; Setting any output handler automatically turns on output buffering.
107
; Note: People who wrote portable scripts should not depend on this ini
108
; directive. Instead, explicitly set the output handler using ob_start().
109
; Using this ini directive may cause problems unless you know what script
111
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
112
; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
113
; Note: output_handler must be empty if this is set 'On' !!!!
114
; Instead you must use zlib.output_handler.
117
; Transparent output compression using the zlib library
118
; Valid values for this option are 'off', 'on', or a specific buffer size
119
; to be used for compression (default is 4KB)
120
; Note: Resulting chunk size may vary due to nature of compression. PHP
121
; outputs chunks that are few hundreds bytes each as a result of
122
; compression. If you prefer a larger chunk size for better
123
; performance, enable output_buffering in addition.
124
; Note: You need to use zlib.output_handler instead of the standard
125
; output_handler, or otherwise the output will be corrupted.
126
zlib.output_compression = Off
127
;zlib.output_compression_level = -1
129
; You cannot specify additional output handlers if zlib.output_compression
130
; is activated here. This setting does the same as output_handler but in
132
;zlib.output_handler =
134
; Implicit flush tells PHP to tell the output layer to flush itself
135
; automatically after every output block. This is equivalent to calling the
136
; PHP function flush() after each and every call to print() or echo() and each
137
; and every HTML block. Turning this option on has serious performance
138
; implications and is generally recommended for debugging purposes only.
141
; The unserialize callback function will be called (with the undefined class'
142
; name as parameter), if the unserializer finds an undefined class
143
; which should be instantiated.
144
; A warning appears if the specified function is not defined, or if the
145
; function doesn't include/implement the missing class.
146
; So only set this entry, if you really want to implement such a
148
unserialize_callback_func=
150
; When floats & doubles are serialized store serialize_precision significant
151
; digits after the floating point. The default value ensures that when floats
152
; are decoded with unserialize, the data will remain the same.
153
serialize_precision = 100
155
; Whether to enable the ability to force arguments to be passed by reference
156
; at function call time. This method is deprecated and is likely to be
157
; unsupported in future versions of PHP/Zend. The encouraged method of
158
; specifying which arguments should be passed by reference is in the function
159
; declaration. You're encouraged to try and turn this option Off and make
160
; sure your scripts work properly with it in order to ensure they will work
161
; with future versions of the language (you will receive a warning each time
162
; you use this feature, and the argument will be passed by value instead of by
164
allow_call_time_pass_reference = On
171
; By default, Safe Mode does a UID compare check when
172
; opening files. If you want to relax this to a GID compare,
173
; then turn on safe_mode_gid.
176
; When safe_mode is on, UID/GID checks are bypassed when
177
; including files from this directory and its subdirectories.
178
; (directory must also be in include_path or full path must
179
; be used when including)
180
safe_mode_include_dir =
182
; When safe_mode is on, only executables located in the safe_mode_exec_dir
183
; will be allowed to be executed via the exec family of functions.
186
; Setting certain environment variables may be a potential security breach.
187
; This directive contains a comma-delimited list of prefixes. In Safe Mode,
188
; the user may only alter environment variables whose names begin with the
189
; prefixes supplied here. By default, users will only be able to set
190
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
192
; Note: If this directive is empty, PHP will let the user modify ANY
193
; environment variable!
194
safe_mode_allowed_env_vars = PHP_
196
; This directive contains a comma-delimited list of environment variables that
197
; the end user won't be able to change using putenv(). These variables will be
198
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
199
safe_mode_protected_env_vars = LD_LIBRARY_PATH
201
; open_basedir, if set, limits all file operations to the defined directory
202
; and below. This directive makes most sense if used in a per-directory
203
; or per-virtualhost web server configuration file. This directive is
204
; *NOT* affected by whether Safe Mode is turned On or Off.
207
; This directive allows you to disable certain functions for security reasons.
208
; It receives a comma-delimited list of function names. This directive is
209
; *NOT* affected by whether Safe Mode is turned On or Off.
212
; This directive allows you to disable certain classes for security reasons.
213
; It receives a comma-delimited list of class names. This directive is
214
; *NOT* affected by whether Safe Mode is turned On or Off.
217
; Colors for Syntax Highlighting mode. Anything that's acceptable in
218
; <span style="color: ???????"> would work.
219
;highlight.string = #DD0000
220
;highlight.comment = #FF9900
221
;highlight.keyword = #007700
222
;highlight.bg = #FFFFFF
223
;highlight.default = #0000BB
224
;highlight.html = #000000
226
; If enabled, the request will be allowed to complete even if the user aborts
227
; the request. Consider enabling it if executing long request, which may end up
228
; being interrupted by the user or a browser timing out.
229
; ignore_user_abort = On
231
; Determines the size of the realpath cache to be used by PHP. This value should
232
; be increased on systems where PHP opens many files to reflect the quantity of
233
; the file operations performed.
234
; realpath_cache_size=16k
236
; Duration of time, in seconds for which to cache realpath information for a given
237
; file or directory. For systems with rarely changing files, consider increasing this
239
; realpath_cache_ttl=120
244
; Decides whether PHP may expose the fact that it is installed on the server
245
; (e.g. by adding its signature to the Web server header). It is no security
246
; threat in any way, but it makes it possible to determine whether you use PHP
247
; on your server or not.
255
max_execution_time = 30 ; Maximum execution time of each script, in seconds
256
max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
257
;max_input_nesting_level = 64 ; Maximum input variable nesting level
258
memory_limit = 128M ; Maximum amount of memory a script may consume (128MB)
261
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
262
; Error handling and logging ;
263
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
265
; error_reporting is a bit-field. Or each number up to get desired error
267
; E_ALL - All errors and warnings (doesn't include E_STRICT)
268
; E_ERROR - fatal run-time errors
269
; E_RECOVERABLE_ERROR - almost fatal run-time errors
270
; E_WARNING - run-time warnings (non-fatal errors)
271
; E_PARSE - compile-time parse errors
272
; E_NOTICE - run-time notices (these are warnings which often result
273
; from a bug in your code, but it's possible that it was
274
; intentional (e.g., using an uninitialized variable and
275
; relying on the fact it's automatically initialized to an
277
; E_STRICT - run-time notices, enable to have PHP suggest changes
278
; to your code which will ensure the best interoperability
279
; and forward compatibility of your code
280
; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
281
; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
283
; E_COMPILE_ERROR - fatal compile-time errors
284
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
285
; E_USER_ERROR - user-generated error message
286
; E_USER_WARNING - user-generated warning message
287
; E_USER_NOTICE - user-generated notice message
291
; - Show all errors, except for notices and coding standards warnings
293
;error_reporting = E_ALL & ~E_NOTICE
295
; - Show all errors, except for notices
297
;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
301
;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
303
; - Show all errors except for notices and coding standards warnings
305
error_reporting = E_ALL & ~E_NOTICE
307
; Print out errors (as a part of the output). For production web sites,
308
; you're strongly encouraged to turn this feature off, and use error logging
309
; instead (see below). Keeping display_errors enabled on a production web site
310
; may reveal security information to end users, such as file paths on your Web
311
; server, your database schema or other information.
313
; possible values for display_errors:
315
; Off - Do not display any errors
316
; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
318
;display_errors = "stderr"
320
; stdout (On) - Display errors to STDOUT
324
; Even when display_errors is on, errors that occur during PHP's startup
325
; sequence are not displayed. It's strongly recommended to keep
326
; display_startup_errors off, except for when debugging.
327
display_startup_errors = Off
329
; Log errors into a log file (server-specific log, stderr, or error_log (below))
330
; As stated above, you're strongly advised to use error logging in place of
331
; error displaying on production web sites.
334
; Set maximum length of log_errors. In error_log information about the source is
335
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
336
log_errors_max_len = 1024
338
; Do not log repeated messages. Repeated errors must occur in same file on same
339
; line until ignore_repeated_source is set true.
340
ignore_repeated_errors = Off
342
; Ignore source of message when ignoring repeated messages. When this setting
343
; is On you will not log errors with repeated messages from different files or
345
ignore_repeated_source = Off
347
; If this parameter is set to Off, then memory leaks will not be shown (on
348
; stdout or in the log). This has only effect in a debug compile, and if
349
; error reporting includes E_WARNING in the allowed list
352
;report_zend_debug = 0
354
; Store the last error/warning message in $php_errormsg (boolean).
357
; Disable the inclusion of HTML tags in error messages.
358
; Note: Never use this feature for production boxes.
361
; If html_errors is set On PHP produces clickable error messages that direct
362
; to a page describing the error or function causing the error in detail.
363
; You can download a copy of the PHP manual from http://www.php.net/docs.php
364
; and change docref_root to the base URL of your local copy including the
365
; leading '/'. You must also specify the file extension being used including
367
; Note: Never use this feature for production boxes.
368
;docref_root = "/phpmanual/"
371
; String to output before an error message.
372
;error_prepend_string = "<font color=ff0000>"
374
; String to output after an error message.
375
;error_append_string = "</font>"
377
; Log errors to specified file.
378
;error_log = filename
380
; Log errors to syslog (Event Log on NT, not valid in Windows 95).
388
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
390
; The separator used in PHP generated URLs to separate arguments.
392
;arg_separator.output = "&"
394
; List of separator(s) used by PHP to parse input URLs into variables.
396
; NOTE: Every character in this directive is considered as separator!
397
;arg_separator.input = ";&"
399
; This directive describes the order in which PHP registers GET, POST, Cookie,
400
; Environment and Built-in variables (G, P, C, E & S respectively, often
401
; referred to as EGPCS or GPC). Registration is done from left to right, newer
402
; values override older values.
403
variables_order = "EGPCS"
405
; Whether or not to register the EGPCS variables as global variables. You may
406
; want to turn this off if you don't want to clutter your scripts' global scope
407
; with user data. This makes most sense when coupled with track_vars - in which
408
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
411
; You should do your best to write your scripts so that they do not require
412
; register_globals to be on; Using form variables as globals can easily lead
413
; to possible security problems, if the code is not very well thought of.
414
register_globals = Off
416
; Whether or not to register the old-style input arrays, HTTP_GET_VARS
417
; and friends. If you're not using them, it's recommended to turn them off,
418
; for performance reasons.
419
register_long_arrays = On
421
; This directive tells PHP whether to declare the argv&argc variables (that
422
; would contain the GET information). If you don't use these variables, you
423
; should turn it off for increased performance.
424
register_argc_argv = On
426
; When enabled, the SERVER and ENV variables are created when they're first
427
; used (Just In Time) instead of when the script starts. If these variables
428
; are not used within a script, having this directive on will result in a
429
; performance gain. The PHP directives register_globals, register_long_arrays,
430
; and register_argc_argv must be disabled for this directive to have any affect.
431
auto_globals_jit = On
433
; Maximum size of POST data that PHP will accept.
439
; Magic quotes for incoming GET/POST/Cookie data.
440
magic_quotes_gpc = On
442
; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
443
magic_quotes_runtime = Off
445
; Use Sybase-style magic quotes (escape ' with '' instead of \').
446
magic_quotes_sybase = Off
448
; Automatically add files before or after any PHP document.
452
; As of 4.0b4, PHP always outputs a character encoding by default in
453
; the Content-type: header. To disable sending of the charset, simply
454
; set it to be empty.
456
; PHP's built-in default is text/html
457
default_mimetype = "text/html"
458
;default_charset = "iso-8859-1"
460
; Always populate the $HTTP_RAW_POST_DATA variable.
461
;always_populate_raw_post_data = On
464
;;;;;;;;;;;;;;;;;;;;;;;;;
465
; Paths and Directories ;
466
;;;;;;;;;;;;;;;;;;;;;;;;;
468
; UNIX: "/path1:/path2"
469
;include_path = ".:/php/includes"
471
; Windows: "\path1;\path2"
472
;include_path = ".;c:\php\includes"
474
; The root of the PHP pages, used only if nonempty.
475
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
476
; if you are running php as a CGI under any web server (other than IIS)
477
; see documentation for security issues. The alternate is to use the
478
; cgi.force_redirect configuration below
481
; The directory under which PHP opens the script using /~username used only
485
; Directory in which the loadable extensions (modules) reside.
488
; Whether or not to enable the dl() function. The dl() function does NOT work
489
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
493
; cgi.force_redirect is necessary to provide security running PHP as a CGI under
494
; most web servers. Left undefined, PHP turns this on by default. You can
495
; turn it off here AT YOUR OWN RISK
496
; **You CAN safely turn this off for IIS, in fact, you MUST.**
497
; cgi.force_redirect = 1
499
; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
503
; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
504
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
505
; will look for to know it is OK to continue execution. Setting this variable MAY
506
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
507
; cgi.redirect_status_env = ;
509
; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
510
; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
511
; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
512
; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
513
; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
514
; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
517
; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
518
; security tokens of the calling client. This allows IIS to define the
519
; security context that the request runs under. mod_fastcgi under Apache
520
; does not currently support this feature (03/17/2002)
521
; Set to 1 if running under IIS. Default is zero.
522
; fastcgi.impersonate = 1;
524
; Disable logging through FastCGI connection
525
; fastcgi.logging = 0
527
; cgi.rfc2616_headers configuration option tells PHP what type of headers to
528
; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
529
; is supported by Apache. When this option is set to 1 PHP will send
530
; RFC2616 compliant header.
532
;cgi.rfc2616_headers = 0
539
; Whether to allow HTTP file uploads.
542
; Temporary directory for HTTP uploaded files (will use system default if not
546
; Maximum allowed size for uploaded files.
547
upload_max_filesize = 2M
554
; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
557
; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
558
allow_url_include = Off
560
; Define the anonymous ftp password (your email address)
563
; Define the User-Agent string
566
; Default timeout for socket based streams (seconds)
567
default_socket_timeout = 60
569
; If your scripts have to deal with files from Macintosh systems,
570
; or you are running on a Mac and need to deal with files from
571
; unix or win32 systems, setting this flag will cause PHP to
572
; automatically detect the EOL character in those files so that
573
; fgets() and file() will work regardless of the source of the file.
574
; auto_detect_line_endings = Off
577
;;;;;;;;;;;;;;;;;;;;;;
578
; Dynamic Extensions ;
579
;;;;;;;;;;;;;;;;;;;;;;
581
; If you wish to have an extension loaded automatically, use the following
584
; extension=modulename.extension
586
; For example, on Windows:
594
; Note that it should be the name of the module only; no directory information
595
; needs to go here. Specify the location of the extension with the
596
; extension_dir directive above.
600
; Note that ODBC support is built in, so no dll is needed for it.
601
; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
602
; extension folders as well as the separate PECL DLL download (PHP 5).
603
; Be sure to appropriately set the extension_dir directive.
605
;extension=php_bz2.dll
606
;extension=php_curl.dll
607
;extension=php_dba.dll
608
;extension=php_dbase.dll
609
;extension=php_exif.dll
610
;extension=php_fdf.dll
611
;extension=php_gd2.dll
612
;extension=php_gettext.dll
613
;extension=php_gmp.dll
614
;extension=php_ifx.dll
615
;extension=php_imap.dll
616
;extension=php_interbase.dll
617
;extension=php_ldap.dll
618
;extension=php_mbstring.dll
619
;extension=php_mcrypt.dll
620
;extension=php_mhash.dll
621
;extension=php_mime_magic.dll
622
;extension=php_ming.dll
623
;extension=php_msql.dll
624
;extension=php_mssql.dll
625
;extension=php_mysql.dll
626
;extension=php_mysqli.dll
627
;extension=php_oci8.dll
628
;extension=php_openssl.dll
629
;extension=php_pdo.dll
630
;extension=php_pdo_firebird.dll
631
;extension=php_pdo_mssql.dll
632
;extension=php_pdo_mysql.dll
633
;extension=php_pdo_oci.dll
634
;extension=php_pdo_oci8.dll
635
;extension=php_pdo_odbc.dll
636
;extension=php_pdo_pgsql.dll
637
;extension=php_pdo_sqlite.dll
638
;extension=php_pgsql.dll
639
;extension=php_pspell.dll
640
;extension=php_shmop.dll
641
;extension=php_snmp.dll
642
;extension=php_soap.dll
643
;extension=php_sockets.dll
644
;extension=php_sqlite.dll
645
;extension=php_sybase_ct.dll
646
;extension=php_tidy.dll
647
;extension=php_xmlrpc.dll
648
;extension=php_xsl.dll
649
;extension=php_zip.dll
656
; Defines the default timezone used by the date functions
659
;date.default_latitude = 31.7667
660
;date.default_longitude = 35.2333
662
;date.sunrise_zenith = 90.583333
663
;date.sunset_zenith = 90.583333
666
;filter.default = unsafe_raw
667
;filter.default_flags =
670
;iconv.input_encoding = ISO-8859-1
671
;iconv.internal_encoding = ISO-8859-1
672
;iconv.output_encoding = ISO-8859-1
675
;sqlite.assoc_case = 0
678
;xmlrpc_error_number = 0
682
;PCRE library backtracking limit.
683
;pcre.backtrack_limit=100000
685
;PCRE library recursion limit.
686
;Please note that if you set this value to a high number you may consume all
687
;the available process stack and eventually crash PHP (due to reaching the
688
;stack size limit imposed by the Operating System).
689
;pcre.recursion_limit=100000
692
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
693
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
694
; runtime, you can define these variables by calling define_syslog_variables().
695
define_syslog_variables = Off
703
;sendmail_from = me@example.com
705
; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
708
; Force the addition of the specified parameters to be passed as extra parameters
709
; to the sendmail binary. These parameters will always replace the value of
710
; the 5th parameter to mail(), even in safe mode.
711
;mail.force_extra_parameters =
717
;odbc.default_db = Not yet implemented
718
;odbc.default_user = Not yet implemented
719
;odbc.default_pw = Not yet implemented
721
; Allow or prevent persistent links.
722
odbc.allow_persistent = On
724
; Check that a connection is still valid before reuse.
725
odbc.check_persistent = On
727
; Maximum number of persistent links. -1 means no limit.
728
odbc.max_persistent = -1
730
; Maximum number of links (persistent + non-persistent). -1 means no limit.
733
; Handling of LONG fields. Returns number of bytes to variables. 0 means
735
odbc.defaultlrl = 4096
737
; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
738
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
739
; of uodbc.defaultlrl and uodbc.defaultbinmode
740
odbc.defaultbinmode = 1
743
; Allow or prevent persistent links.
744
mysql.allow_persistent = On
746
; Maximum number of persistent links. -1 means no limit.
747
mysql.max_persistent = -1
749
; Maximum number of links (persistent + non-persistent). -1 means no limit.
752
; Default port number for mysql_connect(). If unset, mysql_connect() will use
753
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
754
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
758
; Default socket name for local MySQL connects. If empty, uses the built-in
760
mysql.default_socket =
762
; Default host for mysql_connect() (doesn't apply in safe mode).
765
; Default user for mysql_connect() (doesn't apply in safe mode).
768
; Default password for mysql_connect() (doesn't apply in safe mode).
769
; Note that this is generally a *bad* idea to store passwords in this file.
770
; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
771
; and reveal this password! And of course, any users with read access to this
772
; file will be able to reveal the password as well.
773
mysql.default_password =
775
; Maximum time (in seconds) for connect timeout. -1 means no limit
776
mysql.connect_timeout = 60
778
; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
779
; SQL-Errors will be displayed.
780
mysql.trace_mode = Off
784
; Maximum number of links. -1 means no limit.
785
mysqli.max_links = -1
787
; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
788
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
789
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
791
mysqli.default_port = 3306
793
; Default socket name for local MySQL connects. If empty, uses the built-in
795
mysqli.default_socket =
797
; Default host for mysql_connect() (doesn't apply in safe mode).
798
mysqli.default_host =
800
; Default user for mysql_connect() (doesn't apply in safe mode).
801
mysqli.default_user =
803
; Default password for mysqli_connect() (doesn't apply in safe mode).
804
; Note that this is generally a *bad* idea to store passwords in this file.
805
; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
806
; and reveal this password! And of course, any users with read access to this
807
; file will be able to reveal the password as well.
810
; Allow or prevent reconnect
811
mysqli.reconnect = Off
814
; Allow or prevent persistent links.
815
msql.allow_persistent = On
817
; Maximum number of persistent links. -1 means no limit.
818
msql.max_persistent = -1
820
; Maximum number of links (persistent+non persistent). -1 means no limit.
824
; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
825
;oci8.privileged_connect = Off
827
; Connection: The maximum number of persistent OCI8 connections per
828
; process. Using -1 means no limit.
829
;oci8.max_persistent = -1
831
; Connection: The maximum number of seconds a process is allowed to
832
; maintain an idle persistent connection. Using -1 means idle
833
; persistent connections will be maintained forever.
834
;oci8.persistent_timeout = -1
836
; Connection: The number of seconds that must pass before issuing a
837
; ping during oci_pconnect() to check the connection validity. When
838
; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
840
;oci8.ping_interval = 60
842
; Tuning: This option enables statement caching, and specifies how
843
; many statements to cache. Using 0 disables statement caching.
844
;oci8.statement_cache_size = 20
846
; Tuning: Enables statement prefetching and sets the default number of
847
; rows that will be fetched automatically after statement execution.
848
;oci8.default_prefetch = 10
850
; Compatibility. Using On means oci_close() will not close
851
; oci_connect() and oci_new_connect() connections.
852
;oci8.old_oci_close_semantics = Off
855
; Allow or prevent persistent links.
856
pgsql.allow_persistent = On
858
; Detect broken persistent links always with pg_pconnect().
859
; Auto reset feature requires a little overheads.
860
pgsql.auto_reset_persistent = Off
862
; Maximum number of persistent links. -1 means no limit.
863
pgsql.max_persistent = -1
865
; Maximum number of links (persistent+non persistent). -1 means no limit.
868
; Ignore PostgreSQL backends Notice message or not.
869
; Notice message logging require a little overheads.
870
pgsql.ignore_notice = 0
872
; Log PostgreSQL backends Noitce message or not.
873
; Unless pgsql.ignore_notice=0, module cannot log notice message.
877
; Allow or prevent persistent links.
878
sybase.allow_persistent = On
880
; Maximum number of persistent links. -1 means no limit.
881
sybase.max_persistent = -1
883
; Maximum number of links (persistent + non-persistent). -1 means no limit.
884
sybase.max_links = -1
886
;sybase.interface_file = "/usr/sybase/interfaces"
888
; Minimum error severity to display.
889
sybase.min_error_severity = 10
891
; Minimum message severity to display.
892
sybase.min_message_severity = 10
894
; Compatibility mode with old versions of PHP 3.0.
895
; If on, this will cause PHP to automatically assign types to results according
896
; to their Sybase type, instead of treating them all as strings. This
897
; compatibility mode will probably not stay around forever, so try applying
898
; whatever necessary changes to your code, and turn it off.
899
sybase.compatability_mode = Off
902
; Allow or prevent persistent links.
903
sybct.allow_persistent = On
905
; Maximum number of persistent links. -1 means no limit.
906
sybct.max_persistent = -1
908
; Maximum number of links (persistent + non-persistent). -1 means no limit.
911
; Minimum server message severity to display.
912
sybct.min_server_severity = 10
914
; Minimum client message severity to display.
915
sybct.min_client_severity = 10
918
; Number of decimal digits for all bcmath functions.
922
;browscap = extra/browscap.ini
925
; Default host for ifx_connect() (doesn't apply in safe mode).
928
; Default user for ifx_connect() (doesn't apply in safe mode).
931
; Default password for ifx_connect() (doesn't apply in safe mode).
932
ifx.default_password =
934
; Allow or prevent persistent links.
935
ifx.allow_persistent = On
937
; Maximum number of persistent links. -1 means no limit.
938
ifx.max_persistent = -1
940
; Maximum number of links (persistent + non-persistent). -1 means no limit.
943
; If on, select statements return the contents of a text blob instead of its id.
944
ifx.textasvarchar = 0
946
; If on, select statements return the contents of a byte blob instead of its id.
947
ifx.byteasvarchar = 0
949
; Trailing blanks are stripped from fixed-length char columns. May help the
950
; life of Informix SE users.
951
ifx.charasvarchar = 0
953
; If on, the contents of text and byte blobs are dumped to a file instead of
954
; keeping them in memory.
957
; NULL's are returned as empty strings, unless this is set to 1. In that case,
958
; NULL's are returned as string 'NULL'.
962
; Handler used to store/retrieve data.
963
session.save_handler = files
965
; Argument passed to save_handler. In the case of files, this is the path
966
; where data files are stored. Note: Windows users have to change this
967
; variable in order to use PHP's session functions.
969
; As of PHP 4.0.1, you can define the path as:
971
; session.save_path = "N;/path"
973
; where N is an integer. Instead of storing all the session files in
974
; /path, what this will do is use subdirectories N-levels deep, and
975
; store the session data in those directories. This is useful if you
976
; or your OS have problems with lots of files in one directory, and is
977
; a more efficient layout for servers that handle lots of sessions.
979
; NOTE 1: PHP will not create this directory structure automatically.
980
; You can use the script in the ext/session dir for that purpose.
981
; NOTE 2: See the section on garbage collection below if you choose to
982
; use subdirectories for session storage
984
; The file storage module creates files using mode 600 by default.
985
; You can change that by using
987
; session.save_path = "N;MODE;/path"
989
; where MODE is the octal representation of the mode. Note that this
990
; does not overwrite the process's umask.
991
;session.save_path = "/tmp"
993
; Whether to use cookies.
994
session.use_cookies = 1
996
;session.cookie_secure =
998
; This option enables administrators to make their users invulnerable to
999
; attacks which involve passing session ids in URLs; defaults to 0.
1000
; session.use_only_cookies = 1
1002
; Name of the session (used as cookie name).
1003
session.name = PHPSESSID
1005
; Initialize session on request startup.
1006
session.auto_start = 0
1008
; Lifetime in seconds of cookie or, if 0, until browser is restarted.
1009
session.cookie_lifetime = 0
1011
; The path for which the cookie is valid.
1012
session.cookie_path = /
1014
; The domain for which the cookie is valid.
1015
session.cookie_domain =
1017
; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
1018
session.cookie_httponly =
1020
; Handler used to serialize data. php is the standard serializer of PHP.
1021
session.serialize_handler = php
1023
; Define the probability that the 'garbage collection' process is started
1024
; on every session initialization.
1025
; The probability is calculated by using gc_probability/gc_divisor,
1026
; e.g. 1/100 means there is a 1% chance that the GC process starts
1029
session.gc_probability = 1
1030
session.gc_divisor = 100
1032
; After this number of seconds, stored data will be seen as 'garbage' and
1033
; cleaned up by the garbage collection process.
1034
session.gc_maxlifetime = 1440
1036
; NOTE: If you are using the subdirectory option for storing session files
1037
; (see session.save_path above), then garbage collection does *not*
1038
; happen automatically. You will need to do your own garbage
1039
; collection through a shell script, cron entry, or some other method.
1040
; For example, the following script would is the equivalent of
1041
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
1042
; cd /path/to/sessions; find -cmin +24 | xargs rm
1044
; PHP 4.2 and less have an undocumented feature/bug that allows you to
1045
; to initialize a session variable in the global scope, albeit register_globals
1046
; is disabled. PHP 4.3 and later will warn you, if this feature is used.
1047
; You can disable the feature and the warning separately. At this time,
1048
; the warning is only displayed, if bug_compat_42 is enabled.
1050
session.bug_compat_42 = 1
1051
session.bug_compat_warn = 1
1053
; Check HTTP Referer to invalidate externally stored URLs containing ids.
1054
; HTTP_REFERER has to contain this substring for the session to be
1055
; considered as valid.
1056
session.referer_check =
1058
; How many bytes to read from the file.
1059
session.entropy_length = 0
1061
; Specified here to create the session id.
1062
session.entropy_file =
1064
;session.entropy_length = 16
1066
;session.entropy_file = /dev/urandom
1068
; Set to {nocache,private,public,} to determine HTTP caching aspects
1069
; or leave this empty to avoid sending anti-caching headers.
1070
session.cache_limiter = nocache
1072
; Document expires after n minutes.
1073
session.cache_expire = 180
1075
; trans sid support is disabled by default.
1076
; Use of trans sid may risk your users security.
1077
; Use this option with caution.
1078
; - User may send URL contains active session ID
1079
; to other person via. email/irc/etc.
1080
; - URL that contains active session ID may be stored
1081
; in publically accessible computer.
1082
; - User may access your site with the same session ID
1083
; always using URL stored in browser's history or bookmarks.
1084
session.use_trans_sid = 0
1086
; Select a hash function
1088
; 1: SHA-1 (160 bits)
1089
session.hash_function = 0
1091
; Define how many bits are stored in each character when converting
1092
; the binary hash data to something readable.
1096
; 6 bits: 0-9, a-z, A-Z, "-", ","
1097
session.hash_bits_per_character = 4
1099
; The URL rewriter will look for URLs in a defined set of HTML tags.
1100
; form/fieldset are special; if you include them here, the rewriter will
1101
; add a hidden <input> field with the info which is otherwise appended
1102
; to URLs. If you want XHTML conformity, remove the form entry.
1103
; Note that all valid entries require a "=", even if no value follows.
1104
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=,fieldset="
1107
; Allow or prevent persistent links.
1108
mssql.allow_persistent = On
1110
; Maximum number of persistent links. -1 means no limit.
1111
mssql.max_persistent = -1
1113
; Maximum number of links (persistent+non persistent). -1 means no limit.
1114
mssql.max_links = -1
1116
; Minimum error severity to display.
1117
mssql.min_error_severity = 10
1119
; Minimum message severity to display.
1120
mssql.min_message_severity = 10
1122
; Compatibility mode with old versions of PHP 3.0.
1123
mssql.compatability_mode = Off
1126
;mssql.connect_timeout = 5
1131
; Valid range 0 - 2147483647. Default = 4096.
1132
;mssql.textlimit = 4096
1134
; Valid range 0 - 2147483647. Default = 4096.
1135
;mssql.textsize = 4096
1137
; Limits the number of records in each batch. 0 = all records in one batch.
1138
;mssql.batchsize = 0
1140
; Specify how datetime and datetim4 columns are returned
1141
; On => Returns data converted to SQL server settings
1142
; Off => Returns values as YYYY-MM-DD hh:mm:ss
1143
;mssql.datetimeconvert = On
1145
; Use NT authentication when connecting to the server
1146
mssql.secure_connection = Off
1148
; Specify max number of processes. -1 = library default
1149
; msdlib defaults to 25
1150
; FreeTDS defaults to 4096
1151
;mssql.max_procs = -1
1153
; Specify client character set.
1154
; If empty or not set the client charset from freetds.comf is used
1155
; This is only used when compiled with FreeTDS
1156
;mssql.charset = "ISO-8859-1"
1159
; Assert(expr); active by default.
1162
; Issue a PHP warning for each failed assertion.
1163
;assert.warning = On
1165
; Don't bail out by default.
1168
; User-function to be called if an assertion fails.
1169
;assert.callback = 0
1171
; Eval the expression with current error_reporting(). Set to true if you want
1172
; error_reporting(0) around the eval().
1173
;assert.quiet_eval = 0
1176
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
1178
; allow Distributed-COM calls
1179
;com.allow_dcom = true
1180
; autoregister constants of a components typlib on com_load()
1181
;com.autoregister_typelib = true
1182
; register constants casesensitive
1183
;com.autoregister_casesensitive = false
1184
; show warnings on duplicate constant registrations
1185
;com.autoregister_verbose = true
1188
; language for internal character representation.
1189
;mbstring.language = Japanese
1191
; internal/script encoding.
1192
; Some encoding cannot work as internal encoding.
1193
; (e.g. SJIS, BIG5, ISO-2022-*)
1194
;mbstring.internal_encoding = EUC-JP
1196
; http input encoding.
1197
;mbstring.http_input = auto
1199
; http output encoding. mb_output_handler must be
1200
; registered as output buffer to function
1201
;mbstring.http_output = SJIS
1203
; enable automatic encoding translation according to
1204
; mbstring.internal_encoding setting. Input chars are
1205
; converted to internal encoding by setting this to On.
1206
; Note: Do _not_ use automatic encoding translation for
1207
; portable libs/applications.
1208
;mbstring.encoding_translation = Off
1210
; automatic encoding detection order.
1212
;mbstring.detect_order = auto
1214
; substitute_character used when character cannot be converted
1216
;mbstring.substitute_character = none;
1218
; overload(replace) single byte functions by mbstring functions.
1219
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
1220
; etc. Possible values are 0,1,2,4 or combination of them.
1221
; For example, 7 for overload everything.
1223
; 1: Overload mail() function
1224
; 2: Overload str*() functions
1225
; 4: Overload ereg*() functions
1226
;mbstring.func_overload = 0
1229
;fbsql.allow_persistent = On
1230
;fbsql.autocommit = On
1231
;fbsql.show_timestamp_decimals = Off
1232
;fbsql.default_database =
1233
;fbsql.default_database_password =
1234
;fbsql.default_host =
1235
;fbsql.default_password =
1236
;fbsql.default_user = "_SYSTEM"
1237
;fbsql.generate_warnings = Off
1238
;fbsql.max_connections = 128
1239
;fbsql.max_links = 128
1240
;fbsql.max_persistent = -1
1241
;fbsql.max_results = 128
1244
; Tell the jpeg decode to libjpeg warnings and try to create
1245
; a gd image. The warning will then be displayed as notices
1246
; disabled by default
1247
;gd.jpeg_ignore_warning = 0
1250
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
1251
; With mbstring support this will automatically be converted into the encoding
1252
; given by corresponding encode setting. When empty mbstring.internal_encoding
1253
; is used. For the decode settings you can distinguish between motorola and
1254
; intel byte order. A decode setting cannot be empty.
1255
;exif.encode_unicode = ISO-8859-15
1256
;exif.decode_unicode_motorola = UCS-2BE
1257
;exif.decode_unicode_intel = UCS-2LE
1259
;exif.decode_jis_motorola = JIS
1260
;exif.decode_jis_intel = JIS
1263
; The path to a default tidy configuration file to use when using tidy
1264
;tidy.default_config = /usr/local/lib/php/default.tcfg
1266
; Should tidy clean and repair output automatically?
1267
; WARNING: Do not use this option if you are generating non-html content
1268
; such as dynamic images
1269
tidy.clean_output = Off
1272
; Enables or disables WSDL caching feature.
1273
soap.wsdl_cache_enabled=1
1274
; Sets the directory name where SOAP extension will put cache files.
1275
soap.wsdl_cache_dir="/tmp"
1276
; (time to live) Sets the number of second while cached file will be used
1277
; instead of original one.
1278
soap.wsdl_cache_ttl=86400
added
removed
install-files/bin/php/php5.2.5/php.ini-dist
