4
Instalation Instructions for a '.RPM' or a '.SRPM':
5
==============================================
8
Instalation Instructions for a 'tar.gz' file :
9
==============================================
11
These are generic installation instructions.
13
The `configure' shell script attempts to guess correct values for
14
various system-dependent variables used during compilation. It uses
15
those values to create a `Makefile' in each directory of the package.
16
It may also create one or more `.h' files containing system-dependent
17
definitions. Finally, it creates a shell script `config.status' that
18
you can run in the future to recreate the current configuration, a file
19
`config.cache' that saves the results of its tests to speed up
20
reconfiguring, and a file `config.log' containing compiler output
21
(useful mainly for debugging `configure').
23
If you need to do unusual things to compile the package, please try
24
to figure out how `configure' could check whether to do them, and mail
25
diffs or instructions to the address given in the `README' so they can
26
be considered for the next release. If at some point `config.cache'
27
contains results you don't want to keep, you may remove or edit it.
29
The file `configure.in' is used to create `configure' by a program
30
called `autoconf'. You only need `configure.in' if you want to change
31
it or regenerate `configure' using a newer version of `autoconf'.
33
The simplest way to compile this package is:
35
1. `cd' to the directory containing the package's source code and type
36
`./configure' to configure the package for your system. If you're
37
using `csh' on an old version of System V, you might need to type
38
`sh ./configure' instead to prevent `csh' from trying to execute
41
Running `configure' takes awhile. While running, it prints some
42
messages telling which features it is checking for.
44
2. Type `make' to compile the package.
46
3. Optionally, type `make check' to run any self-tests that come with
49
4. Type `make install' to install the programs and any data files and
52
5. You can remove the program binaries and object files from the
53
source code directory by typing `make clean'. To also remove the
54
files that `configure' created (so you can compile the package for
55
a different kind of computer), type `make distclean'. There is
56
also a `make maintainer-clean' target, but that is intended mainly
57
for the package's developers. If you use it, you may have to get
58
all sorts of other programs in order to regenerate files that came
59
with the distribution.
64
Some systems require unusual options for compilation or linking that
65
the `configure' script does not know about. You can give `configure'
66
initial values for variables by setting them in the environment. Using
67
a Bourne-compatible shell, you can do that on the command line like
69
CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
71
Or on systems that have the `env' program, you can do it like this:
72
env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
74
Compiling For Multiple Architectures
75
====================================
77
You can compile the package for more than one kind of computer at the
78
same time, by placing the object files for each architecture in their
79
own directory. To do this, you must use a version of `make' that
80
supports the `VPATH' variable, such as GNU `make'. `cd' to the
81
directory where you want the object files and executables to go and run
82
the `configure' script. `configure' automatically checks for the
83
source code in the directory that `configure' is in and in `..'.
85
If you have to use a `make' that does not supports the `VPATH'
86
variable, you have to compile the package for one architecture at a time
87
in the source code directory. After you have installed the package for
88
one architecture, use `make distclean' before reconfiguring for another
94
By default, `make install' will install the package's files in
95
`/usr/local/bin', `/usr/local/man', etc. You can specify an
96
installation prefix other than `/usr/local' by giving `configure' the
97
option `--prefix=PATH'.
99
You can specify separate installation prefixes for
100
architecture-specific files and architecture-independent files. If you
101
give `configure' the option `--exec-prefix=PATH', the package will use
102
PATH as the prefix for installing programs and libraries.
103
Documentation and other data files will still use the regular prefix.
105
In addition, if you use an unusual directory layout you can give
106
options like `--bindir=PATH' to specify different values for particular
107
kinds of files. Run `configure --help' for a list of the directories
108
you can set and what kinds of files go in them.
110
If the package supports it, you can cause programs to be installed
111
with an extra prefix or suffix on their names by giving `configure' the
112
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
117
Some packages pay attention to `--enable-FEATURE' options to
118
`configure', where FEATURE indicates an optional part of the package.
119
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
120
is something like `gnu-as' or `x' (for the X Window System). The
121
`README' should mention any `--enable-' and `--with-' options that the
124
For packages that use the X Window System, `configure' can usually
125
find the X include and library files automatically, but if it doesn't,
126
you can use the `configure' options `--x-includes=DIR' and
127
`--x-libraries=DIR' to specify their locations.
129
Specifying the System Type
130
==========================
132
There may be some features `configure' can not figure out
133
automatically, but needs to determine by the type of host the package
134
will run on. Usually `configure' can figure that out, but if it prints
135
a message saying it can not guess the host type, give it the
136
`--host=TYPE' option. TYPE can either be a short name for the system
137
type, such as `sun4', or a canonical name with three fields:
140
See the file `config.sub' for the possible values of each field. If
141
`config.sub' isn't included in this package, then this package doesn't
142
need to know the host type.
144
If you are building compiler tools for cross-compiling, you can also
145
use the `--target=TYPE' option to select the type of system they will
146
produce code for and the `--build=TYPE' option to select the type of
147
system on which you are compiling the package.
152
If you want to set default values for `configure' scripts to share,
153
you can create a site shell script called `config.site' that gives
154
default values for variables like `CC', `cache_file', and `prefix'.
155
`configure' looks for `PREFIX/share/config.site' if it exists, then
156
`PREFIX/etc/config.site' if it exists. Or, you can set the
157
`CONFIG_SITE' environment variable to the location of the site script.
158
A warning: not all `configure' scripts look for a site script.
163
`configure' recognizes the following options to control how it
167
Use and save the results of the tests in FILE instead of
168
`./config.cache'. Set FILE to `/dev/null' to disable caching, for
169
debugging `configure'.
172
Print a summary of the options to `configure', and exit.
177
Do not print messages saying which checks are being made. To
178
suppress all normal output, redirect it to `/dev/null' (any error
179
messages will still be shown).
182
Look for the package's source code in directory DIR. Usually
183
`configure' can determine that directory automatically.
186
Print the version of Autoconf used to generate the `configure'
189
`configure' also accepts some other, not widely useful, options.