1
% texinfo.tex -- TeX macros to handle Texinfo files.
3
% Load plain if necessary, i.e., if running under initex.
4
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
6
\def\texinfoversion{2000-11-09.08}
8
% Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 2000
9
% Free Software Foundation, Inc.
11
% This texinfo.tex file is free software; you can redistribute it and/or
12
% modify it under the terms of the GNU General Public License as
13
% published by the Free Software Foundation; either version 2, or (at
14
% your option) any later version.
16
% This texinfo.tex file is distributed in the hope that it will be
17
% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
18
% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
19
% General Public License for more details.
21
% You should have received a copy of the GNU General Public License
22
% along with this texinfo.tex file; see the file COPYING. If not, write
23
% to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
24
% Boston, MA 02111-1307, USA.
26
% In other words, you are welcome to use, share and improve this program.
27
% You are forbidden to forbid anyone else to use, share and improve
28
% what you give them. Help stamp out software-hoarding!
30
% Please try the latest version of texinfo.tex before submitting bug
31
% reports; you can get the latest version from:
32
% ftp://ftp.gnu.org/gnu/texinfo.tex
33
% (and all GNU mirrors, see http://www.gnu.org/order/ftp.html)
34
% ftp://texinfo.org/tex/texinfo.tex
35
% ftp://us.ctan.org/macros/texinfo/texinfo.tex
36
% (and all CTAN mirrors, finger ctan@us.ctan.org for a list).
37
% /home/gd/gnu/doc/texinfo.tex on the GNU machines.
38
% The texinfo.tex in any given Texinfo distribution could well be out
39
% of date, so if that's what you're using, please check.
40
% Texinfo has a small home page at http://texinfo.org/.
42
% Send bug reports to bug-texinfo@gnu.org. Please include including a
43
% complete document in each bug report with which we can reproduce the
44
% problem. Patches are, of course, greatly appreciated.
46
% To process a Texinfo manual with TeX, it's most reliable to use the
47
% texi2dvi shell script that comes with the distribution. For a simple
48
% manual foo.texi, however, you can get away with this:
53
% dvips foo.dvi -o # or whatever, to process the dvi file; this makes foo.ps.
54
% The extra runs of TeX get the cross-reference information correct.
55
% Sometimes one run after texindex suffices, and sometimes you need more
56
% than two; texi2dvi does it as many times as necessary.
58
% It is possible to adapt texinfo.tex for other languages. You can get
59
% the existing language-specific files from ftp://ftp.gnu.org/gnu/texinfo/.
61
\message{Loading texinfo [version \texinfoversion]:}
63
% If in a .fmt file, print the version number
64
% and turn on active characters that we couldn't do earlier because
65
% they might have appeared in the input file name.
66
\everyjob{\message{[Texinfo version \texinfoversion]}%
67
\catcode`+=\active \catcode`\_=\active}
69
% Save some parts of plain tex whose names we will redefine.
71
\let\ptexbullet=\bullet
85
% We never want plain's outer \+ definition in Texinfo.
86
% For @tex, we can use \tabalign.
92
% If this character appears in an error message or help string, it
93
% starts a new line in the output.
96
% Set up fixed words for English if not already set.
97
\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
98
\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi
99
\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi
100
\ifx\putwordin\undefined \gdef\putwordin{in}\fi
101
\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
102
\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
103
\ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi
104
\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
105
\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi
106
\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi
107
\ifx\putwordof\undefined \gdef\putwordof{of}\fi
108
\ifx\putwordon\undefined \gdef\putwordon{on}\fi
109
\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi
110
\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi
111
\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi
112
\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi
113
\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi
114
\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi
115
\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi
117
\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
118
\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
119
\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
120
\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
121
\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
122
\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
123
\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
124
\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
125
\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
126
\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
127
\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
128
\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
130
\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi
131
\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi
132
\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi
133
\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi
134
\ifx\putwordDeftypevar\undefined\gdef\putwordDeftypevar{Variable}\fi
135
\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi
136
\ifx\putwordDeftypefun\undefined\gdef\putwordDeftypefun{Function}\fi
142
\hyphenation{ap-pen-dix}
143
\hyphenation{mini-buf-fer mini-buf-fers}
145
\hyphenation{white-space}
147
% Margin to add to right of even pages, to left of odd pages.
148
\newdimen \bindingoffset
149
\newdimen \normaloffset
150
\newdimen\pagewidth \newdimen\pageheight
152
% Sometimes it is convenient to have everything in the transcript file
153
% and nothing on the terminal. We don't just call \tracingall here,
154
% since that produces some useless output on the terminal.
156
\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
157
\ifx\eTeXversion\undefined
158
\def\loggingall{\tracingcommands2 \tracingstats2
159
\tracingpages1 \tracingoutput1 \tracinglostchars1
160
\tracingmacros2 \tracingparagraphs1 \tracingrestores1
161
\showboxbreadth\maxdimen\showboxdepth\maxdimen
164
\def\loggingall{\tracingcommands3 \tracingstats2
165
\tracingpages1 \tracingoutput1 \tracinglostchars1
166
\tracingmacros2 \tracingparagraphs1 \tracingrestores1
167
\tracingscantokens1 \tracingassigns1 \tracingifs1
168
\tracinggroups1 \tracingnesting2
169
\showboxbreadth\maxdimen\showboxdepth\maxdimen
173
% For @cropmarks command.
174
% Do @cropmarks to get crop marks.
177
\let\cropmarks = \cropmarkstrue
179
% Dimensions to add cropmarks at corners.
180
% Added by P. A. MacKay, 12 Nov. 1986
182
\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
183
\newdimen\cornerlong \cornerlong=1pc
184
\newdimen\cornerthick \cornerthick=.3pt
185
\newdimen\topandbottommargin \topandbottommargin=.75in
187
% Main output routine.
189
\output = {\onepageout{\pagecontents\PAGE}}
194
% \onepageout takes a vbox as an argument. Note that \pagecontents
195
% does insertions, but you have to call it yourself.
197
\ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
199
\ifodd\pageno \advance\hoffset by \bindingoffset
200
\else \advance\hoffset by -\bindingoffset\fi
202
% Do this outside of the \shipout so @code etc. will be expanded in
203
% the headline as they should be, not taken literally (outputting ''code).
204
\setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
205
\setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
208
% Have to do this stuff outside the \shipout because we want it to
209
% take effect in \write's, yet the group defined by the \vbox ends
210
% before the \shipout runs.
212
\escapechar = `\\ % use backslash in output files.
213
\indexdummies % don't expand commands in the output.
214
\normalturnoffactive % \ in index entries must not stay \, e.g., if
215
% the page break happens to be in the middle of an example.
217
% Do this early so pdf references go to the beginning of the page.
218
\ifpdfmakepagedest \pdfmkdest{\the\pageno} \fi
220
\ifcropmarks \vbox to \outervsize\bgroup
222
\vskip-\topandbottommargin
224
\line{\ewtop\hfil\ewtop}%
227
\vbox{\moveleft\cornerthick\nstop}%
229
\vbox{\moveright\cornerthick\nstop}%
232
\vskip\topandbottommargin
234
\hfil % center the page within the outer (page) hsize.
235
\ifodd\pageno\hskip\bindingoffset\fi
241
\ifdim\ht\footlinebox > 0pt
242
% Only leave this space if the footline is nonempty.
243
% (We lessened \vsize for it in \oddfootingxxx.)
244
% The \baselineskip=24pt in plain's \makefootline has no effect.
245
\vskip 2\baselineskip
250
\egroup % end of \vbox\bgroup
251
\hfil\egroup % end of (centering) \line\bgroup
252
\vskip\topandbottommargin plus1fill minus1fill
253
\boxmaxdepth = \cornerthick
256
\vbox{\moveleft\cornerthick\nsbot}%
258
\vbox{\moveright\cornerthick\nsbot}%
261
\line{\ewbot\hfil\ewbot}%
263
\egroup % \vbox from first cropmarks clause
265
}% end of \shipout\vbox
266
}% end of group with \turnoffactive
268
\ifnum\outputpenalty>-20000 \else\dosupereject\fi
271
\newinsert\margin \dimen\margin=\maxdimen
273
\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
275
\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
276
% marginal hacks, juha@viisa.uucp (Juha Takala)
277
\ifvoid\margin\else % marginal info is present
278
\rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
279
\dimen@=\dp#1 \unvbox#1
280
\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
281
\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
284
% Here are the rules for the cropmarks. Note that they are
285
% offset so that the space between them is truly \outerhsize or \outervsize
286
% (P. A. MacKay, 12 November, 1986)
288
\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
290
{\hrule height\cornerthick depth\cornerlong width\cornerthick}}
291
\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
293
{\hrule height\cornerlong depth\cornerthick width\cornerthick}}
295
% Parse an argument, then pass it to #1. The argument is the rest of
296
% the input line (except we remove a trailing comment). #1 should be a
297
% macro which expects an ordinary undelimited TeX argument.
303
\futurelet\temp\parseargx
306
% If the next token is an obeyed space (from an @example environment or
307
% the like), remove it and recurse. Otherwise, we're done.
309
% \obeyedspace is defined far below, after the definition of \sepspaces.
310
\ifx\obeyedspace\temp
311
\expandafter\parseargdiscardspace
313
\expandafter\parseargline
317
% Remove a single space (as the delimiter token to the macro call).
319
\gdef\parseargdiscardspace {\futurelet\temp\parseargx}}
322
\gdef\parseargline#1^^M{%
323
\endgroup % End of the group started in \parsearg.
325
% First remove any @c comment, then any @comment.
326
% Result of each macro is put in \toks0.
327
\argremovec #1\c\relax %
328
\expandafter\argremovecomment \the\toks0 \comment\relax %
330
% Call the caller's macro, saved as \next in \parsearg.
331
\expandafter\next\expandafter{\the\toks0}%
335
% Since all \c{,omment} does is throw away the argument, we can let TeX
336
% do that for us. The \relax here is matched by the \relax in the call
337
% in \parseargline; it could be more or less anything, its purpose is
338
% just to delimit the argument to the \c.
339
\def\argremovec#1\c#2\relax{\toks0 = {#1}}
340
\def\argremovecomment#1\comment#2\relax{\toks0 = {#1}}
342
% \argremovec{,omment} might leave us with trailing spaces, though; e.g.,
343
% @end itemize @c foo
344
% will have two active spaces as part of the argument with the
345
% `itemize'. Here we remove all active spaces from #1, and assign the
348
% This loses if there are any *other* active characters besides spaces
349
% in the argument -- _ ^ +, for example -- since they get expanded.
350
% Fortunately, Texinfo does not define any such commands. (If it ever
351
% does, the catcode of the characters in questionwill have to be changed
352
% here.) But this means we cannot call \removeactivespaces as part of
353
% \argremovec{,omment}, since @c uses \parsearg, and thus the argument
354
% that \parsearg gets might well have any character at all in it.
356
\def\removeactivespaces#1{%
360
\global\toks0 = \expandafter{\temp}%
364
% Change the active space to expand to nothing.
368
\gdef\ignoreactivespaces{\obeyspaces\let =\empty}
372
\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
374
%% These are used to keep @begin/@end levels from running away
375
%% Call \inENV within environments (after a \begingroup)
376
\newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi}
378
\ifENV\errmessage{Still within an environment; press RETURN to continue}
379
\endgroup\fi} % This is not perfect, but it should reduce lossage
381
% @begin foo is the same as @foo, for now.
382
\newhelp\EMsimple{Press RETURN to continue.}
384
\outer\def\begin{\parsearg\beginxxx}
387
\expandafter\ifx\csname #1\endcsname\relax
388
{\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else
389
\csname #1\endcsname\fi}
391
% @end foo executes the definition of \Efoo.
393
\def\end{\parsearg\endxxx}
395
\removeactivespaces{#1}%
396
\edef\endthing{\the\toks0}%
398
\expandafter\ifx\csname E\endthing\endcsname\relax
399
\expandafter\ifx\csname \endthing\endcsname\relax
400
% There's no \foo, i.e., no ``environment'' foo.
402
\errmessage{Undefined command `@end \endthing'}%
404
\unmatchedenderror\endthing
407
% Everything's ok; the right environment has been started.
408
\csname E\endthing\endcsname
412
% There is an environment #1, but it hasn't been started. Give an error.
414
\def\unmatchedenderror#1{%
416
\errmessage{This `@end #1' doesn't have a matching `@#1'}%
419
% Define the control sequence \E#1 to give an unmatched @end error.
421
\def\defineunmatchedend#1{%
422
\expandafter\def\csname E#1\endcsname{\unmatchedenderror{#1}}%
426
% Single-spacing is done by various environments (specifically, in
427
% \nonfillstart and \quotations).
428
\newskip\singlespaceskip \singlespaceskip = 12.5pt
430
% Why was this kern here? It messes up equalizing space above and below
431
% environments. --karl, 6may93
432
%{\advance \baselineskip by -\singlespaceskip
433
%\kern \baselineskip}%
434
\setleading \singlespaceskip
437
%% Simple single-character @ commands
440
% Kludge this until the fonts are right (grr).
443
% This is turned off because it was never documented
444
% and you can use @w{...} around a quote to suppress ligatures.
445
%% Define @` and @' to be the same as ` and '
446
%% but suppressing ligatures.
450
% Used to generate quoted braces.
451
\def\mylbrace {{\tt\char123}}
452
\def\myrbrace {{\tt\char125}}
456
% Definitions to produce actual \{ & \} command in an index.
457
\catcode`\{ = 12 \catcode`\} = 12
458
\catcode`\[ = 1 \catcode`\] = 2
459
\catcode`\@ = 0 \catcode`\\ = 12
464
% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
465
% Others are defined by plain TeX: @` @' @" @^ @~ @= @v @H.
468
\def\ringaccent#1{{\accent23 #1}}
473
% Other special characters: @questiondown @exclamdown
474
% Plain TeX defines: @AA @AE @O @OE @L (and lowercase versions) @ss.
475
\def\questiondown{?`}
478
% Dotless i and dotless j, used for accents.
483
\ifx\temp\imacro \ptexi
484
\else\ifx\temp\jmacro \j
485
\else \errmessage{@dotless can be used only with i or j}%
489
% Be sure we're in horizontal mode when doing a tie, since we make space
490
% equivalent to this in @example-like environments. Otherwise, a space
491
% at the beginning of a line will start with \penalty -- and
492
% since \penalty is valid in vertical mode, we'd end up putting the
493
% penalty on the vertical list instead of in the new paragraph.
495
% Avoid using \@M directly, because that causes trouble
496
% if the definition is written into an index file.
497
\global\let\tiepenalty = \@M
498
\gdef\tie{\leavevmode\penalty\tiepenalty\ }
501
% @: forces normal size whitespace following.
502
\def\:{\spacefactor=1000 }
504
% @* forces a line break.
505
\def\*{\hfil\break\hbox{}\ignorespaces}
507
% @. is an end-of-sentence period.
508
\def\.{.\spacefactor=3000 }
510
% @! is an end-of-sentence bang.
511
\def\!{!\spacefactor=3000 }
513
% @? is an end-of-sentence query.
514
\def\?{?\spacefactor=3000 }
516
% @w prevents a word break. Without the \leavevmode, @w at the
517
% beginning of a paragraph, when TeX is still in vertical mode, would
518
% produce a whole line of output instead of starting the paragraph.
519
\def\w#1{\leavevmode\hbox{#1}}
521
% @group ... @end group forces ... to be all on one page, by enclosing
522
% it in a TeX vbox. We use \vtop instead of \vbox to construct the box
523
% to keep its height that of a normal line. According to the rules for
524
% \topskip (p.114 of the TeXbook), the glue inserted is
525
% max (\topskip - \ht (first item), 0). If that height is large,
526
% therefore, no glue is inserted, and the space between the headline and
527
% the text is small, which looks bad.
529
\def\group{\begingroup
530
\ifnum\catcode13=\active \else
531
\errhelp = \groupinvalidhelp
532
\errmessage{@group invalid in context where filling is enabled}%
535
% The \vtop we start below produces a box with normal height and large
536
% depth; thus, TeX puts \baselineskip glue before it, and (when the
537
% next line of text is done) \lineskip glue after it. (See p.82 of
538
% the TeXbook.) Thus, space below is not quite equal to space
539
% above. But it's pretty close.
541
\egroup % End the \vtop.
542
\endgroup % End the \group.
546
% We have to put a strut on the last line in case the @group is in
547
% the midst of an example, rather than completely enclosing it.
548
% Otherwise, the interline space between the last line of the group
549
% and the first line afterwards is too small. But we can't put the
550
% strut in \Egroup, since there it would be on a line by itself.
551
% Hence this just inserts a strut at the beginning of each line.
552
\everypar = {\strut}%
554
% Since we have a strut on every line, we don't need any of TeX's
555
% normal interline spacing.
558
% OK, but now we have to do something about blank
559
% lines in the input in @example-like environments, which normally
560
% just turn into \lisppar, which will insert no space now that we've
561
% turned off the interline space. Simplest is to make them be an
564
\edef\par{\leavevmode \par}%
566
% Reset ^^M's definition to new definition of \par.
570
% Do @comment since we are called inside an environment such as
571
% @example, where each end-of-line in the input causes an
572
% end-of-line in the output. We don't want the end-of-line after
573
% the `@group' to put extra space in the output. Since @group
574
% should appear on a line by itself (according to the Texinfo
575
% manual), we don't worry about eating any user text.
579
% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
580
% message, so this ends up printing `@group can only ...'.
582
\newhelp\groupinvalidhelp{%
583
group can only be used in environments such as @example,^^J%
584
where each line of input produces a line of output.}
586
% @need space-in-mils
587
% forces a page break if there is not space-in-mils remaining.
589
\newdimen\mil \mil=0.001in
591
\def\need{\parsearg\needx}
593
% Old definition--didn't work.
594
%\def\needx #1{\par %
595
%% This method tries to make TeX break the page naturally
596
%% if the depth of the box does not fit.
598
%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak
603
% Ensure vertical mode, so we don't make a big box in the middle of a
607
% If the @need value is less than one line space, it's useless.
609
\dimen2 = \ht\strutbox
610
\advance\dimen2 by \dp\strutbox
611
\ifdim\dimen0 > \dimen2
613
% Do a \strut just to make the height of this box be normal, so the
614
% normal leading is inserted relative to the preceding line.
615
% And a page break here is fine.
616
\vtop to #1\mil{\strut\vfil}%
618
% TeX does not even consider page breaks if a penalty added to the
619
% main vertical list is 10000 or more. But in order to see if the
620
% empty box we just added fits on the page, we must make it consider
621
% page breaks. On the other hand, we don't want to actually break the
622
% page after the empty box. So we use a penalty of 9999.
624
% There is an extremely small chance that TeX will actually break the
625
% page at this \penalty, if there are no other feasible breakpoints in
626
% sight. (If the user is using lots of big @group commands, which
627
% almost-but-not-quite fill up a page, TeX will have a hard time doing
628
% good page breaking, for example.) However, I could not construct an
629
% example where a page broke at this \penalty; if it happens in a real
630
% document, then we can reconsider our strategy.
633
% Back up by the size of the box, whether we did a page break or not.
636
% Do not allow a page break right after this kern.
641
% @br forces paragraph break
645
% @dots{} output an ellipsis using the current font.
646
% We do .5em per period so that it has the same spacing in a typewriter
647
% font as three actual period characters.
652
\hskip 0pt plus 0.25fil minus 0.25fil
654
\hskip 0pt plus 0.5fil minus 0.5fil
658
% @enddots{} is an end-of-sentence ellipsis.
663
\hskip 0pt plus 0.25fil minus 0.25fil
665
\hskip 0pt plus 0.5fil minus 0.5fil
671
% @page forces the start of a new page
673
\def\page{\par\vfill\supereject}
676
% outputs text on separate line in roman font, starting at standard page margin
678
% This records the amount of indent in the innermost environment.
679
% That's how much \exdent should take out.
680
\newskip\exdentamount
682
% This defn is used inside fill environments such as @defun.
683
\def\exdent{\parsearg\exdentyyy}
684
\def\exdentyyy #1{{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}}
686
% This defn is used inside nofill environments such as @example.
687
\def\nofillexdent{\parsearg\nofillexdentyyy}
688
\def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount
689
\leftline{\hskip\leftskip{\rm#1}}}}
691
% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
692
% paragraph. For more general purposes, use the \margin insertion
693
% class. WHICH is `l' or `r'.
695
\newskip\inmarginspacing \inmarginspacing=1cm
696
\def\strutdepth{\dp\strutbox}
698
\def\doinmargin#1#2{\strut\vadjust{%
701
\vtop to \strutdepth{%
702
\baselineskip=\strutdepth
704
% if you have multiple lines of stuff to put here, you'll need to
705
% make the vbox yourself of the appropriate size.
707
\llap{#2\hskip\inmarginspacing}%
709
\rlap{\hskip\hsize\hskip\inmarginspacing#2}%
714
\def\inleftmargin{\doinmargin l}
715
\def\inrightmargin{\doinmargin r}
716
\def\inmargin{% not perfect, but better than nothing.
718
\let\temp=\inleftmargin
720
\let\temp=\inrightmargin
725
% @include file insert text of that file as input.
726
% Allow normal characters that we make active in the argument (a file name).
727
\def\include{\begingroup
736
\parsearg\includezzz}
737
% Restore active chars for included file.
738
\def\includezzz#1{\endgroup\begingroup
739
% Read the included file in a group so nested @include's work.
746
% @center line outputs that line, centered
748
\def\center{\parsearg\centerzzz}
749
\def\centerzzz #1{{\advance\hsize by -\leftskip
750
\advance\hsize by -\rightskip
753
% @sp n outputs n lines of vertical space
755
\def\sp{\parsearg\spxxx}
756
\def\spxxx #1{\vskip #1\baselineskip}
758
% @comment ...line which is ignored...
759
% @c is the same as @comment
760
% @ignore ... @end ignore is another way to write a comment
762
\def\comment{\begingroup \catcode`\^^M=\other%
763
\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
765
{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
769
% @paragraphindent NCHARS
770
% We'll use ems for NCHARS, close enough.
771
% We cannot implement @paragraphindent asis, though.
773
\def\asisword{asis} % no translation, these are keywords
776
\def\paragraphindent{\parsearg\doparagraphindent}
777
\def\doparagraphindent#1{%
782
\defaultparindent = 0pt
784
\defaultparindent = #1em
787
\parindent = \defaultparindent
790
% @exampleindent NCHARS
791
% We'll use ems for NCHARS like @paragraphindent.
792
% It seems @exampleindent asis isn't necessary, but
793
% I preserve it to make it similar to @paragraphindent.
794
\def\exampleindent{\parsearg\doexampleindent}
795
\def\doexampleindent#1{%
802
\lispnarrowing = #1em
807
% @asis just yields its argument. Used with @table, for example.
811
% @math means output in math mode.
812
% We don't use $'s directly in the definition of \math because control
813
% sequences like \math are expanded when the toc file is written. Then,
814
% we read the toc file back, the $'s will be normal characters (as they
815
% should be, according to the definition of Texinfo). So we must use a
816
% control sequence to switch into and out of math mode.
818
% This isn't quite enough for @math to work properly in indices, but it
819
% seems unlikely it will ever be needed there.
821
\let\implicitmath = $
822
\def\math#1{\implicitmath #1\implicitmath}
824
% @bullet and @minus need the same treatment as @math, just above.
825
\def\bullet{\implicitmath\ptexbullet\implicitmath}
826
\def\minus{\implicitmath-\implicitmath}
828
% @refill is a no-op.
831
% If working on a large document in chapters, it is convenient to
832
% be able to disable indexing, cross-referencing, and contents, for test runs.
833
% This is done with @novalidate (before @setfilename).
835
\newif\iflinks \linkstrue % by default we want the aux files.
836
\let\novalidate = \linksfalse
838
% @setfilename is done at the beginning of every texinfo file.
839
% So open here the files we need to have open while reading the input.
840
% This makes it possible to make a .fmt file for texinfo.
844
\fi % \openindices needs to do some work in any case.
846
\fixbackslash % Turn off hack to swallow `\input texinfo'.
847
\global\let\setfilename=\comment % Ignore extra @setfilename cmds.
849
% If texinfo.cnf is present on the system, read it.
850
% Useful for site-wide @afourpaper, etc.
851
% Just to be on the safe side, close the input stream before the \input.
852
\openin 1 texinfo.cnf
853
\ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi
857
\comment % Ignore the actual filename.
860
% Called from \setfilename.
872
\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
876
% adobe `portable' document format
880
\newcount\filenamelength
889
\newif\ifpdfmakepagedest
891
\ifx\pdfoutput\undefined
893
\let\pdfmkdest = \gobble
894
\let\pdfurl = \gobble
895
\let\endlink = \relax
896
\let\linkcolor = \relax
897
\let\pdfmakeoutlines = \relax
902
\def\dopdfimage#1#2#3{%
904
\def\imageheight{#3}%
905
\ifnum\pdftexversion < 14
910
\ifx\empty\imagewidth\else width \imagewidth \fi
911
\ifx\empty\imageheight\else height \imageheight \fi
913
\ifnum\pdftexversion < 14 \else
914
\pdfrefximage \pdflastximage
916
\def\pdfmkdest#1{\pdfdest name{#1@} xyz}
918
\let\linkcolor = \Blue % was Cyan, but that seems light?
919
\def\endlink{\Black\pdfendlink}
920
% Adding outlines to PDF; macros for calculating structure of outlines
921
% come from Petr Olsak
922
\def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
923
\else \csname#1\endcsname \fi}
924
\def\advancenumber#1{\tempnum=\expnumber{#1}\relax
926
\expandafter\xdef\csname#1\endcsname{\the\tempnum}}
927
\def\pdfmakeoutlines{{%
928
\openin 1 \jobname.toc
933
\let\_ = \normalunderscore
934
% Thanh's hack / proper braces in bookmarks
935
\edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
936
\edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
938
\def\chapentry ##1##2##3{}
939
\def\unnumbchapentry ##1##2{}
940
\def\secentry ##1##2##3##4{\advancenumber{chap##2}}
941
\def\unnumbsecentry ##1##2{}
942
\def\subsecentry ##1##2##3##4##5{\advancenumber{sec##2.##3}}
943
\def\unnumbsubsecentry ##1##2{}
944
\def\subsubsecentry ##1##2##3##4##5##6{\advancenumber{subsec##2.##3.##4}}
945
\def\unnumbsubsubsecentry ##1##2{}
947
\def\chapentry ##1##2##3{%
948
\pdfoutline goto name{\pdfmkpgn{##3}}count-\expnumber{chap##2}{##1}}
949
\def\unnumbchapentry ##1##2{%
950
\pdfoutline goto name{\pdfmkpgn{##2}}{##1}}
951
\def\secentry ##1##2##3##4{%
952
\pdfoutline goto name{\pdfmkpgn{##4}}count-\expnumber{sec##2.##3}{##1}}
953
\def\unnumbsecentry ##1##2{%
954
\pdfoutline goto name{\pdfmkpgn{##2}}{##1}}
955
\def\subsecentry ##1##2##3##4##5{%
956
\pdfoutline goto name{\pdfmkpgn{##5}}count-\expnumber{subsec##2.##3.##4}{##1}}
957
\def\unnumbsubsecentry ##1##2{%
958
\pdfoutline goto name{\pdfmkpgn{##2}}{##1}}
959
\def\subsubsecentry ##1##2##3##4##5##6{%
960
\pdfoutline goto name{\pdfmkpgn{##6}}{##1}}
961
\def\unnumbsubsubsecentry ##1##2{%
962
\pdfoutline goto name{\pdfmkpgn{##2}}{##1}}
967
\def\params{#1}\def\E{END}%
969
\let\nextmakelinks=\relax
971
\let\nextmakelinks=\makelinks
972
\ifnum\lnkcount>0,\fi
974
\startlink attr{/Border [0 0 0]}
975
goto name{\pdfmkpgn{\the\pgn}}%
977
\advance\lnkcount by 1%
982
\def\picknum#1{\expandafter\pn#1}
993
\def\ppn#1{\pgn=#1\gobble}
994
\def\ppnn{\pgn=\first}
995
\def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,}
996
\def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
997
\def\skipspaces#1{\def\PP{#1}\def\D{|}%
998
\ifx\PP\D\let\nextsp\relax
999
\else\let\nextsp\skipspaces
1000
\ifx\p\space\else\addtokens{\filename}{\PP}%
1001
\advance\filenamelength by 1
1005
\def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
1006
\ifnum\pdftexversion < 14
1007
\let \startlink \pdfannotlink
1009
\let \startlink \pdfstartlink
1013
\normalturnoffactive\def\@{@}%
1015
\startlink attr{/Border [0 0 0]}%
1016
user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
1019
\def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
1020
\def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
1021
\def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
1022
\def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
1024
\expandafter\poptoks\the\toksA|ENDTOKS|
1026
\else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
1027
\else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
1028
\else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
1030
\ifnum0=\countA\else\makelink\fi
1031
\ifx\first.\let\next=\done\else
1033
\addtokens{\toksB}{\the\toksD}
1034
\ifx\first,\addtokens{\toksB}{\space}\fi
1036
\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
1038
\def\makelink{\addtokens{\toksB}%
1039
{\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
1041
\startlink attr{/Border [0 0 0]} goto name{\mkpgn{#1}}
1042
\linkcolor #1\endlink}
1044
\def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
1045
\fi % \ifx\pdfoutput
1049
% Font-change commands.
1051
% Texinfo sort of supports the sans serif font style, which plain TeX does not.
1052
% So we set up a \sf analogous to plain's \rm, etc.
1054
\def\sf{\fam=\sffam \tensf}
1055
\let\li = \sf % Sometimes we call it \li, not \sf.
1057
% We don't need math for this one.
1060
% Use Computer Modern fonts at \magstephalf (11pt).
1061
\newcount\mainmagstep
1062
\mainmagstep=\magstephalf
1064
% Set the font macro #1 to the font named #2, adding on the
1065
% specified font prefix (normally `cm').
1066
% #3 is the font's design size, #4 is a scale factor
1067
\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
1069
% Use cm as the default font prefix.
1070
% To specify the font prefix, you must define \fontprefix
1071
% before you read in texinfo.tex.
1072
\ifx\fontprefix\undefined
1075
% Support font families that don't use the same naming scheme as CM.
1077
\def\rmbshape{bx} %where the normal face is bold
1082
\def\ttslshape{sltt}
1093
\let\mainmagstep=\magstep1
1094
\setfont\textrm\rmshape{12}{1000}
1095
\setfont\texttt\ttshape{12}{1000}
1097
\setfont\textrm\rmshape{10}{\mainmagstep}
1098
\setfont\texttt\ttshape{10}{\mainmagstep}
1100
% Instead of cmb10, you many want to use cmbx10.
1101
% cmbx10 is a prettier font on its own, but cmb10
1102
% looks better when embedded in a line with cmr10.
1103
\setfont\textbf\bfshape{10}{\mainmagstep}
1104
\setfont\textit\itshape{10}{\mainmagstep}
1105
\setfont\textsl\slshape{10}{\mainmagstep}
1106
\setfont\textsf\sfshape{10}{\mainmagstep}
1107
\setfont\textsc\scshape{10}{\mainmagstep}
1108
\setfont\textttsl\ttslshape{10}{\mainmagstep}
1109
\font\texti=cmmi10 scaled \mainmagstep
1110
\font\textsy=cmsy10 scaled \mainmagstep
1112
% A few fonts for @defun, etc.
1113
\setfont\defbf\bxshape{10}{\magstep1} %was 1314
1114
\setfont\deftt\ttshape{10}{\magstep1}
1115
\def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf}
1117
% Fonts for indices, footnotes, small examples (9pt).
1118
\setfont\smallrm\rmshape{9}{1000}
1119
\setfont\smalltt\ttshape{9}{1000}
1120
\setfont\smallbf\bfshape{10}{900}
1121
\setfont\smallit\itshape{9}{1000}
1122
\setfont\smallsl\slshape{9}{1000}
1123
\setfont\smallsf\sfshape{9}{1000}
1124
\setfont\smallsc\scshape{10}{900}
1125
\setfont\smallttsl\ttslshape{10}{900}
1129
% Fonts for title page:
1130
\setfont\titlerm\rmbshape{12}{\magstep3}
1131
\setfont\titleit\itbshape{10}{\magstep4}
1132
\setfont\titlesl\slbshape{10}{\magstep4}
1133
\setfont\titlett\ttbshape{12}{\magstep3}
1134
\setfont\titlettsl\ttslshape{10}{\magstep4}
1135
\setfont\titlesf\sfbshape{17}{\magstep1}
1136
\let\titlebf=\titlerm
1137
\setfont\titlesc\scbshape{10}{\magstep4}
1138
\font\titlei=cmmi12 scaled \magstep3
1139
\font\titlesy=cmsy10 scaled \magstep4
1140
\def\authorrm{\secrm}
1142
% Chapter (and unnumbered) fonts (17.28pt).
1143
\setfont\chaprm\rmbshape{12}{\magstep2}
1144
\setfont\chapit\itbshape{10}{\magstep3}
1145
\setfont\chapsl\slbshape{10}{\magstep3}
1146
\setfont\chaptt\ttbshape{12}{\magstep2}
1147
\setfont\chapttsl\ttslshape{10}{\magstep3}
1148
\setfont\chapsf\sfbshape{17}{1000}
1150
\setfont\chapsc\scbshape{10}{\magstep3}
1151
\font\chapi=cmmi12 scaled \magstep2
1152
\font\chapsy=cmsy10 scaled \magstep3
1154
% Section fonts (14.4pt).
1155
\setfont\secrm\rmbshape{12}{\magstep1}
1156
\setfont\secit\itbshape{10}{\magstep2}
1157
\setfont\secsl\slbshape{10}{\magstep2}
1158
\setfont\sectt\ttbshape{12}{\magstep1}
1159
\setfont\secttsl\ttslshape{10}{\magstep2}
1160
\setfont\secsf\sfbshape{12}{\magstep1}
1162
\setfont\secsc\scbshape{10}{\magstep2}
1163
\font\seci=cmmi12 scaled \magstep1
1164
\font\secsy=cmsy10 scaled \magstep2
1166
% \setfont\ssecrm\bxshape{10}{\magstep1} % This size an font looked bad.
1167
% \setfont\ssecit\itshape{10}{\magstep1} % The letters were too crowded.
1168
% \setfont\ssecsl\slshape{10}{\magstep1}
1169
% \setfont\ssectt\ttshape{10}{\magstep1}
1170
% \setfont\ssecsf\sfshape{10}{\magstep1}
1172
%\setfont\ssecrm\bfshape{10}{1315} % Note the use of cmb rather than cmbx.
1173
%\setfont\ssecit\itshape{10}{1315} % Also, the size is a little larger than
1174
%\setfont\ssecsl\slshape{10}{1315} % being scaled magstep1.
1175
%\setfont\ssectt\ttshape{10}{1315}
1176
%\setfont\ssecsf\sfshape{10}{1315}
1178
%\let\ssecbf=\ssecrm
1180
% Subsection fonts (13.15pt).
1181
\setfont\ssecrm\rmbshape{12}{\magstephalf}
1182
\setfont\ssecit\itbshape{10}{1315}
1183
\setfont\ssecsl\slbshape{10}{1315}
1184
\setfont\ssectt\ttbshape{12}{\magstephalf}
1185
\setfont\ssecttsl\ttslshape{10}{1315}
1186
\setfont\ssecsf\sfbshape{12}{\magstephalf}
1188
\setfont\ssecsc\scbshape{10}{\magstep1}
1189
\font\sseci=cmmi12 scaled \magstephalf
1190
\font\ssecsy=cmsy10 scaled 1315
1191
% The smallcaps and symbol fonts should actually be scaled \magstep1.5,
1192
% but that is not a standard magnification.
1194
% In order for the font changes to affect most math symbols and letters,
1195
% we have to define the \textfont of the standard families. Since
1196
% texinfo doesn't allow for producing subscripts and superscripts, we
1197
% don't bother to reset \scriptfont and \scriptscriptfont (which would
1198
% also require loading a lot more fonts).
1200
\def\resetmathfonts{%
1201
\textfont0 = \tenrm \textfont1 = \teni \textfont2 = \tensy
1202
\textfont\itfam = \tenit \textfont\slfam = \tensl \textfont\bffam = \tenbf
1203
\textfont\ttfam = \tentt \textfont\sffam = \tensf
1207
% The font-changing commands redefine the meanings of \tenSTYLE, instead
1208
% of just \STYLE. We do this so that font changes will continue to work
1209
% in math mode, where it is the current \fam that is relevant in most
1210
% cases, not the current font. Plain TeX does \def\bf{\fam=\bffam
1211
% \tenbf}, for example. By redefining \tenbf, we obviate the need to
1212
% redefine \bf itself.
1214
\let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
1215
\let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
1216
\let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl
1219
\let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
1220
\let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
1221
\let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
1222
\let\tenttsl=\titlettsl
1223
\resetmathfonts \setleading{25pt}}
1224
\def\titlefont#1{{\titlefonts\rm #1}}
1226
\let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
1227
\let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
1228
\let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl
1229
\resetmathfonts \setleading{19pt}}
1231
\let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
1232
\let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
1233
\let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl
1234
\resetmathfonts \setleading{16pt}}
1236
\let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
1237
\let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
1238
\let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl
1239
\resetmathfonts \setleading{15pt}}
1240
\let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf?
1242
\let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
1243
\let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
1244
\let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
1245
\let\tenttsl=\smallttsl
1246
\resetmathfonts \setleading{11pt}}
1248
% Set up the default fonts, so we can use them for creating boxes.
1252
% Define these so they can be easily changed for other fonts.
1253
\def\angleleft{$\langle$}
1254
\def\angleright{$\rangle$}
1256
% Count depth in font-changes, for error checks
1257
\newcount\fontdepth \fontdepth=0
1259
% Fonts for short table of contents.
1260
\setfont\shortcontrm\rmshape{12}{1000}
1261
\setfont\shortcontbf\bxshape{12}{1000}
1262
\setfont\shortcontsl\slshape{12}{1000}
1264
%% Add scribe-like font environments, plus @l for inline lisp (usually sans
1265
%% serif) and @ii for TeX italic
1267
% \smartitalic{ARG} outputs arg in italics, followed by an italic correction
1268
% unless the following character is such as not to need one.
1269
\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else\/\fi\fi\fi}
1270
\def\smartslanted#1{{\sl #1}\futurelet\next\smartitalicx}
1271
\def\smartitalic#1{{\it #1}\futurelet\next\smartitalicx}
1274
\let\var=\smartslanted
1275
\let\dfn=\smartslanted
1276
\let\emph=\smartitalic
1277
\let\cite=\smartslanted
1282
% We can't just use \exhyphenpenalty, because that only has effect at
1283
% the end of a paragraph. Restore normal hyphenation at the end of the
1284
% group within which \nohyphenation is presumably called.
1286
\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation}
1287
\def\restorehyphenation{\hyphenchar\font = `- }
1290
{\tt \rawbackslash \frenchspacing #1}%
1294
\def\samp#1{`\tclose{#1}'\null}
1295
\setfont\keyrm\rmshape{8}{1000}
1297
\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
1298
\raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
1299
\vbox{\hrule\kern-0.4pt
1300
\hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
1302
\kern-.06em\raise0.4pt\hbox{\angleright}}}}
1303
% The old definition, with no lozenge:
1304
%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
1305
\def\ctrl #1{{\tt \rawbackslash \hat}#1}
1307
% @file, @option are the same as @samp.
1311
% @code is a modification of @t,
1312
% which makes spaces the same size as normal in the surrounding text.
1315
% Change normal interword space to be same as for the current font.
1316
\spaceskip = \fontdimen2\font
1318
% Switch to typewriter.
1321
% But `\ ' produces the large typewriter interword space.
1322
\def\ {{\spaceskip = 0pt{} }}%
1324
% Turn off hyphenation.
1334
% We *must* turn on hyphenation at `-' and `_' in \code.
1335
% Otherwise, it is too hard to avoid overfull hboxes
1336
% in the Emacs manual, the Library manual, etc.
1338
% Unfortunately, TeX uses one parameter (\hyphenchar) to control
1339
% both hyphenation at - and hyphenation within words.
1340
% We must therefore turn them both off (\tclose does that)
1341
% and arrange explicitly to hyphenate at a dash.
1347
\global\def\code{\begingroup
1348
\catcode`\-=\active \let-\codedash
1349
\catcode`\_=\active \let_\codeunder
1353
% If we end up with any active - characters when handling the index,
1354
% just treat them as a normal -.
1355
\global\def\indexbreaks{\catcode`\-=\active \let-\realdash}
1359
\def\codedash{-\discretionary{}{}{}}
1360
\def\codeunder{\ifusingtt{\normalunderscore\discretionary{}{}{}}{\_}}
1361
\def\codex #1{\tclose{#1}\endgroup}
1363
%\let\exp=\tclose %Was temporary
1365
% @kbd is like @code, except that if the argument is just one @key command,
1366
% then @kbd has no effect.
1368
% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
1369
% `example' (@kbd uses ttsl only inside of @example and friends),
1370
% or `code' (@kbd uses normal tty font always).
1371
\def\kbdinputstyle{\parsearg\kbdinputstylexxx}
1372
\def\kbdinputstylexxx#1{%
1374
\ifx\arg\worddistinct
1375
\gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
1376
\else\ifx\arg\wordexample
1377
\gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
1378
\else\ifx\arg\wordcode
1379
\gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
1382
\def\worddistinct{distinct}
1383
\def\wordexample{example}
1386
% Default is kbdinputdistinct. (Too much of a hassle to call the macro,
1387
% the catcodes are wrong for parsearg to work.)
1388
\gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}
1391
\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
1392
\ifx\one\xkey\ifx\threex\three \key{#2}%
1393
\else{\tclose{\kbdfont\look}}\fi
1394
\else{\tclose{\kbdfont\look}}\fi}
1396
% For @url, @env, @command quotes seem unnecessary, so use \code.
1401
% @uref (abbreviation for `urlref') takes an optional (comma-separated)
1402
% second argument specifying the text to display and an optional third
1403
% arg as text to display instead of (rather than in addition to) the url
1404
% itself. First (mandatory) arg is the url. Perhaps eventually put in
1405
% a hypertex \special here.
1407
\def\uref#1{\douref #1,,,\finish}
1408
\def\douref#1,#2,#3,#4\finish{\begingroup
1411
\setbox0 = \hbox{\ignorespaces #3}%
1413
\unhbox0 % third arg given, show only that
1415
\setbox0 = \hbox{\ignorespaces #2}%
1418
\unhbox0 % PDF: 2nd arg given, show only it
1420
\unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url
1423
\code{#1}% only url given, so show it
1429
% rms does not like angle brackets --karl, 17may97.
1430
% So now @email is just like @uref, unless we are pdf.
1432
%\def\email#1{\angleleft{\tt #1}\angleright}
1434
\def\email#1{\doemail#1,,\finish}
1435
\def\doemail#1,#2,#3\finish{\begingroup
1438
\setbox0 = \hbox{\ignorespaces #2}%
1439
\ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
1446
% Check if we are currently using a typewriter font. Since all the
1447
% Computer Modern typewriter fonts have zero interword stretch (and
1448
% shrink), and it is reasonable to expect all typewriter fonts to have
1449
% this property, we can check that font parameter.
1451
\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
1453
% Typeset a dimension, e.g., `in' or `pt'. The only reason for the
1454
% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
1456
\def\dmn#1{\thinspace #1}
1458
\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
1460
% @l was never documented to mean ``switch to the Lisp font'',
1461
% and it is not used as such in any manual I can find. We need it for
1462
% Polish suppressed-l. --karl, 22sep96.
1463
%\def\l#1{{\li #1}\null}
1465
% Explicit font changes: @r, @sc, undocumented @ii.
1466
\def\r#1{{\rm #1}} % roman font
1467
\def\sc#1{{\smallcaps#1}} % smallcaps font
1468
\def\ii#1{{\it #1}} % italic font
1470
% @acronym downcases the argument and prints in smallcaps.
1471
\def\acronym#1{{\smallcaps \lowercase{#1}}}
1473
% @pounds{} is a sterling sign.
1474
\def\pounds{{\it\$}}
1477
\message{page headings,}
1479
\newskip\titlepagetopglue \titlepagetopglue = 1.5in
1480
\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
1482
% First the title page. Must do @settitle before @titlepage.
1484
\newif\iffinishedtitlepage
1486
% Do an implicit @contents or @shortcontents after @end titlepage if the
1487
% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage.
1489
\newif\ifsetcontentsaftertitlepage
1490
\let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
1491
\newif\ifsetshortcontentsaftertitlepage
1492
\let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
1494
\def\shorttitlepage{\parsearg\shorttitlepagezzz}
1495
\def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
1496
\endgroup\page\hbox{}\page}
1498
\def\titlepage{\begingroup \parindent=0pt \textfonts
1499
\let\subtitlerm=\tenrm
1500
\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}%
1502
\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines}%
1504
% Leave some space at the very top of the page.
1505
\vglue\titlepagetopglue
1507
% Now you can print the title using @title.
1508
\def\title{\parsearg\titlezzz}%
1509
\def\titlezzz##1{\leftline{\titlefonts\rm ##1}
1510
% print a rule at the page bottom also.
1511
\finishedtitlepagefalse
1512
\vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
1513
% No rule at page bottom unless we print one at the top with @title.
1514
\finishedtitlepagetrue
1516
% Now you can put text using @subtitle.
1517
\def\subtitle{\parsearg\subtitlezzz}%
1518
\def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}%
1520
% @author should come last, but may come many times.
1521
\def\author{\parsearg\authorzzz}%
1522
\def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi
1523
{\authorfont \leftline{##1}}}%
1525
% Most title ``pages'' are actually two pages long, with space
1526
% at the top of the second. We don't want the ragged left on the second.
1527
\let\oldpage = \page
1529
\iffinishedtitlepage\else
1533
\let\page = \oldpage
1535
% \def\page{\oldpage \hbox{}}
1539
\iffinishedtitlepage\else
1542
% It is important to do the page break before ending the group,
1543
% because the headline and footline are only empty inside the group.
1544
% If we use the new definition of \page, we always get a blank page
1545
% after the title page, which we certainly don't want.
1549
% If they want short, they certainly want long too.
1550
\ifsetshortcontentsaftertitlepage
1553
\global\let\shortcontents = \relax
1554
\global\let\contents = \relax
1557
\ifsetcontentsaftertitlepage
1559
\global\let\contents = \relax
1560
\global\let\shortcontents = \relax
1563
\ifpdf \pdfmakepagedesttrue \fi
1568
\def\finishtitlepage{%
1569
\vskip4pt \hrule height 2pt width \hsize
1570
\vskip\titlepagebottomglue
1571
\finishedtitlepagetrue
1574
%%% Set up page headings and footings.
1576
\let\thispage=\folio
1578
\newtoks\evenheadline % headline on even pages
1579
\newtoks\oddheadline % headline on odd pages
1580
\newtoks\evenfootline % footline on even pages
1581
\newtoks\oddfootline % footline on odd pages
1583
% Now make Tex use those variables
1584
\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
1585
\else \the\evenheadline \fi}}
1586
\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
1587
\else \the\evenfootline \fi}\HEADINGShook}
1588
\let\HEADINGShook=\relax
1590
% Commands to set those variables.
1591
% For example, this is what @headings on does
1592
% @evenheading @thistitle|@thispage|@thischapter
1593
% @oddheading @thischapter|@thispage|@thistitle
1594
% @evenfooting @thisfile||
1595
% @oddfooting ||@thisfile
1597
\def\evenheading{\parsearg\evenheadingxxx}
1598
\def\oddheading{\parsearg\oddheadingxxx}
1599
\def\everyheading{\parsearg\everyheadingxxx}
1601
\def\evenfooting{\parsearg\evenfootingxxx}
1602
\def\oddfooting{\parsearg\oddfootingxxx}
1603
\def\everyfooting{\parsearg\everyfootingxxx}
1607
\gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish}
1608
\gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{%
1609
\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1611
\gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish}
1612
\gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{%
1613
\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1615
\gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
1617
\gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish}
1618
\gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{%
1619
\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1621
\gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish}
1622
\gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{%
1623
\global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
1625
% Leave some space for the footline. Hopefully ok to assume
1626
% @evenfooting will not be used by itself.
1627
\global\advance\pageheight by -\baselineskip
1628
\global\advance\vsize by -\baselineskip
1631
\gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}}
1633
}% unbind the catcode of @.
1635
% @headings double turns headings on for double-sided printing.
1636
% @headings single turns headings on for single-sided printing.
1637
% @headings off turns them off.
1638
% @headings on same as @headings double, retained for compatibility.
1639
% @headings after turns on double-sided headings after this page.
1640
% @headings doubleafter turns on double-sided headings after this page.
1641
% @headings singleafter turns on single-sided headings after this page.
1642
% By default, they are off at the start of a document,
1643
% and turned `on' after @end titlepage.
1645
\def\headings #1 {\csname HEADINGS#1\endcsname}
1648
\global\evenheadline={\hfil} \global\evenfootline={\hfil}
1649
\global\oddheadline={\hfil} \global\oddfootline={\hfil}}
1651
% When we turn headings on, set the page number to 1.
1652
% For double-sided printing, put current file name in lower left corner,
1653
% chapter name on inside top of right hand pages, document
1654
% title on inside top of left hand pages, and page numbers on outside top
1655
% edge of all pages.
1656
\def\HEADINGSdouble{
1658
\global\evenfootline={\hfil}
1659
\global\oddfootline={\hfil}
1660
\global\evenheadline={\line{\folio\hfil\thistitle}}
1661
\global\oddheadline={\line{\thischapter\hfil\folio}}
1662
\global\let\contentsalignmacro = \chapoddpage
1664
\let\contentsalignmacro = \chappager
1666
% For single-sided printing, chapter title goes across top left of page,
1667
% page number on top right.
1668
\def\HEADINGSsingle{
1670
\global\evenfootline={\hfil}
1671
\global\oddfootline={\hfil}
1672
\global\evenheadline={\line{\thischapter\hfil\folio}}
1673
\global\oddheadline={\line{\thischapter\hfil\folio}}
1674
\global\let\contentsalignmacro = \chappager
1676
\def\HEADINGSon{\HEADINGSdouble}
1678
\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
1679
\let\HEADINGSdoubleafter=\HEADINGSafter
1680
\def\HEADINGSdoublex{%
1681
\global\evenfootline={\hfil}
1682
\global\oddfootline={\hfil}
1683
\global\evenheadline={\line{\folio\hfil\thistitle}}
1684
\global\oddheadline={\line{\thischapter\hfil\folio}}
1685
\global\let\contentsalignmacro = \chapoddpage
1688
\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
1689
\def\HEADINGSsinglex{%
1690
\global\evenfootline={\hfil}
1691
\global\oddfootline={\hfil}
1692
\global\evenheadline={\line{\thischapter\hfil\folio}}
1693
\global\oddheadline={\line{\thischapter\hfil\folio}}
1694
\global\let\contentsalignmacro = \chappager
1697
% Subroutines used in generating headings
1698
% This produces Day Month Year style of output.
1699
% Only define if not already defined, in case a txi-??.tex file has set
1700
% up a different format (e.g., txi-cs.tex does this).
1701
\ifx\today\undefined
1705
\or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
1706
\or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
1707
\or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
1712
% @settitle line... specifies the title of the document, for headings.
1713
% It generates no output of its own.
1714
\def\thistitle{\putwordNoTitle}
1715
\def\settitle{\parsearg\settitlezzz}
1716
\def\settitlezzz #1{\gdef\thistitle{#1}}
1720
% Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x).
1722
% default indentation of table text
1723
\newdimen\tableindent \tableindent=.8in
1724
% default indentation of @itemize and @enumerate text
1725
\newdimen\itemindent \itemindent=.3in
1726
% margin between end of table item and start of table text.
1727
\newdimen\itemmargin \itemmargin=.1in
1729
% used internally for \itemindent minus \itemmargin
1732
% Note @table, @vtable, and @vtable define @item, @itemx, etc., with
1734
% They also define \itemindex
1735
% to index the item name in whatever manner is desired (perhaps none).
1737
\newif\ifitemxneedsnegativevskip
1739
\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
1741
\def\internalBitem{\smallbreak \parsearg\itemzzz}
1742
\def\internalBitemx{\itemxpar \parsearg\itemzzz}
1744
\def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz}
1745
\def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \itemxpar \parsearg\xitemzzz}
1747
\def\internalBkitem{\smallbreak \parsearg\kitemzzz}
1748
\def\internalBkitemx{\itemxpar \parsearg\kitemzzz}
1750
\def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}%
1753
\def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}%
1756
\def\itemzzz #1{\begingroup %
1757
\advance\hsize by -\rightskip
1758
\advance\hsize by -\tableindent
1759
\setbox0=\hbox{\itemfont{#1}}%
1761
\nobreak % This prevents a break before @itemx.
1763
% If the item text does not fit in the space we have, put it on a line
1764
% by itself, and do not allow a page break either before or after that
1765
% line. We do not start a paragraph here because then if the next
1766
% command is, e.g., @kindex, the whatsit would get put into the
1767
% horizontal list on a line by itself, resulting in extra blank space.
1768
\ifdim \wd0>\itemmax
1770
% Make this a paragraph so we get the \parskip glue and wrapping,
1771
% but leave it ragged-right.
1773
\advance\leftskip by-\tableindent
1774
\advance\hsize by\tableindent
1775
\advance\rightskip by0pt plus1fil
1776
\leavevmode\unhbox0\par
1779
% We're going to be starting a paragraph, but we don't want the
1780
% \parskip glue -- logically it's part of the @item we just started.
1781
\nobreak \vskip-\parskip
1783
% Stop a page break at the \parskip glue coming up. Unfortunately
1784
% we can't prevent a possible page break at the following
1785
% \baselineskip glue.
1788
\itemxneedsnegativevskipfalse
1790
% The item text fits into the space. Start a paragraph, so that the
1791
% following text (if any) will end up on the same line.
1793
% Do this with kerns and \unhbox so that if there is a footnote in
1794
% the item text, it can migrate to the main vertical list and
1795
% eventually be printed.
1796
\nobreak\kern-\tableindent
1797
\dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
1799
\nobreak\kern\dimen0
1801
\itemxneedsnegativevskiptrue
1805
\def\item{\errmessage{@item while not in a table}}
1806
\def\itemx{\errmessage{@itemx while not in a table}}
1807
\def\kitem{\errmessage{@kitem while not in a table}}
1808
\def\kitemx{\errmessage{@kitemx while not in a table}}
1809
\def\xitem{\errmessage{@xitem while not in a table}}
1810
\def\xitemx{\errmessage{@xitemx while not in a table}}
1812
% Contains a kludge to get @end[description] to work.
1813
\def\description{\tablez{\dontindex}{1}{}{}{}{}}
1815
% @table, @ftable, @vtable.
1816
\def\table{\begingroup\inENV\obeylines\obeyspaces\tablex}
1817
{\obeylines\obeyspaces%
1818
\gdef\tablex #1^^M{%
1819
\tabley\dontindex#1 \endtabley}}
1821
\def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex}
1822
{\obeylines\obeyspaces%
1823
\gdef\ftablex #1^^M{%
1824
\tabley\fnitemindex#1 \endtabley
1825
\def\Eftable{\endgraf\afterenvbreak\endgroup}%
1826
\let\Etable=\relax}}
1828
\def\vtable{\begingroup\inENV\obeylines\obeyspaces\vtablex}
1829
{\obeylines\obeyspaces%
1830
\gdef\vtablex #1^^M{%
1831
\tabley\vritemindex#1 \endtabley
1832
\def\Evtable{\endgraf\afterenvbreak\endgroup}%
1833
\let\Etable=\relax}}
1836
\def\fnitemindex #1{\doind {fn}{\code{#1}}}%
1837
\def\vritemindex #1{\doind {vr}{\code{#1}}}%
1840
\gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup%
1841
\tablez{#1}{#2}{#3}{#4}{#5}{#6}}}
1843
\def\tablez #1#2#3#4#5#6{%
1846
\def\Edescription{\Etable}% Necessary kludge.
1848
\ifnum 0#3>0 \advance \leftskip by #3\mil \fi %
1849
\ifnum 0#4>0 \tableindent=#4\mil \fi %
1850
\ifnum 0#5>0 \advance \rightskip by #5\mil \fi %
1852
\itemmax=\tableindent %
1853
\advance \itemmax by -\itemmargin %
1854
\advance \leftskip by \tableindent %
1855
\exdentamount=\tableindent
1857
\parskip = \smallskipamount
1858
\ifdim \parskip=0pt \parskip=2pt \fi%
1859
\def\Etable{\endgraf\afterenvbreak\endgroup}%
1860
\let\item = \internalBitem %
1861
\let\itemx = \internalBitemx %
1862
\let\kitem = \internalBkitem %
1863
\let\kitemx = \internalBkitemx %
1864
\let\xitem = \internalBxitem %
1865
\let\xitemx = \internalBxitemx %
1868
% This is the counter used by @enumerate, which is really @itemize
1872
\def\itemize{\parsearg\itemizezzz}
1874
\def\itemizezzz #1{%
1875
\begingroup % ended by the @end itemize
1876
\itemizey {#1}{\Eitemize}
1879
\def\itemizey #1#2{%
1881
\itemmax=\itemindent %
1882
\advance \itemmax by -\itemmargin %
1883
\advance \leftskip by \itemindent %
1884
\exdentamount=\itemindent
1886
\parskip = \smallskipamount %
1887
\ifdim \parskip=0pt \parskip=2pt \fi%
1888
\def#2{\endgraf\afterenvbreak\endgroup}%
1889
\def\itemcontents{#1}%
1890
\let\item=\itemizeitem}
1892
% Set sfcode to normal for the chars that usually have another value.
1893
% These are `.?!:;,'
1894
\def\frenchspacing{\sfcode46=1000 \sfcode63=1000 \sfcode33=1000
1895
\sfcode58=1000 \sfcode59=1000 \sfcode44=1000 }
1897
% \splitoff TOKENS\endmark defines \first to be the first token in
1898
% TOKENS, and \rest to be the remainder.
1900
\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
1902
% Allow an optional argument of an uppercase letter, lowercase letter,
1903
% or number, to specify the first label in the enumerated list. No
1904
% argument is the same as `1'.
1906
\def\enumerate{\parsearg\enumeratezzz}
1907
\def\enumeratezzz #1{\enumeratey #1 \endenumeratey}
1908
\def\enumeratey #1 #2\endenumeratey{%
1909
\begingroup % ended by the @end enumerate
1911
% If we were given no argument, pretend we were given `1'.
1913
\ifx\thearg\empty \def\thearg{1}\fi
1915
% Detect if the argument is a single token. If so, it might be a
1916
% letter. Otherwise, the only valid thing it can be is a number.
1917
% (We will always have one token, because of the test we just made.
1918
% This is a good thing, since \splitoff doesn't work given nothing at
1919
% all -- the first parameter is undelimited.)
1920
\expandafter\splitoff\thearg\endmark
1922
% Only one token in the argument. It could still be anything.
1923
% A ``lowercase letter'' is one whose \lccode is nonzero.
1924
% An ``uppercase letter'' is one whose \lccode is both nonzero, and
1925
% not equal to itself.
1926
% Otherwise, we assume it's a number.
1928
% We need the \relax at the end of the \ifnum lines to stop TeX from
1929
% continuing to look for a <number>.
1931
\ifnum\lccode\expandafter`\thearg=0\relax
1932
\numericenumerate % a number (we hope)
1935
\ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
1936
\lowercaseenumerate % lowercase letter
1938
\uppercaseenumerate % uppercase letter
1942
% Multiple tokens in the argument. We hope it's a number.
1947
% An @enumerate whose labels are integers. The starting integer is
1950
\def\numericenumerate{%
1952
\startenumeration{\the\itemno}%
1955
% The starting (lowercase) letter is in \thearg.
1956
\def\lowercaseenumerate{%
1957
\itemno = \expandafter`\thearg
1959
% Be sure we're not beyond the end of the alphabet.
1961
\errmessage{No more lowercase letters in @enumerate; get a bigger
1968
% The starting (uppercase) letter is in \thearg.
1969
\def\uppercaseenumerate{%
1970
\itemno = \expandafter`\thearg
1972
% Be sure we're not beyond the end of the alphabet.
1974
\errmessage{No more uppercase letters in @enumerate; get a bigger
1981
% Call itemizey, adding a period to the first argument and supplying the
1982
% common last two arguments. Also subtract one from the initial value in
1983
% \itemno, since @item increments \itemno.
1985
\def\startenumeration#1{%
1986
\advance\itemno by -1
1987
\itemizey{#1.}\Eenumerate\flushcr
1990
% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
1993
\def\alphaenumerate{\enumerate{a}}
1994
\def\capsenumerate{\enumerate{A}}
1995
\def\Ealphaenumerate{\Eenumerate}
1996
\def\Ecapsenumerate{\Eenumerate}
1998
% Definition of @item while inside @itemize.
2001
\advance\itemno by 1
2002
{\let\par=\endgraf \smallbreak}%
2003
\ifhmode \errmessage{In hmode at itemizeitem}\fi
2004
{\parskip=0in \hskip 0pt
2005
\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}%
2006
\vadjust{\penalty 1200}}%
2009
% @multitable macros
2010
% Amy Hendrickson, 8/18/94, 3/6/96
2012
% @multitable ... @end multitable will make as many columns as desired.
2013
% Contents of each column will wrap at width given in preamble. Width
2014
% can be specified either with sample text given in a template line,
2015
% or in percent of \hsize, the current width of text on page.
2017
% Table can continue over pages but will only break between lines.
2021
% Either define widths of columns in terms of percent of \hsize:
2022
% @multitable @columnfractions .25 .3 .45
2025
% Numbers following @columnfractions are the percent of the total
2026
% current hsize to be used for each column. You may use as many
2027
% columns as desired.
2030
% Or use a template:
2031
% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
2033
% using the widest term desired in each column.
2035
% For those who want to use more than one line's worth of words in
2036
% the preamble, break the line within one argument and it
2037
% will parse correctly, i.e.,
2039
% @multitable {Column 1 template} {Column 2 template} {Column 3
2042
% @multitable {Column 1 template} {Column 2 template}
2043
% {Column 3 template}
2045
% Each new table line starts with @item, each subsequent new column
2046
% starts with @tab. Empty columns may be produced by supplying @tab's
2047
% with nothing between them for as many times as empty columns are needed,
2048
% ie, @tab@tab@tab will produce two empty columns.
2050
% @item, @tab, @multitable or @end multitable do not need to be on their
2051
% own lines, but it will not hurt if they are.
2053
% Sample multitable:
2055
% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
2056
% @item first col stuff @tab second col stuff @tab third col
2063
% @item first col stuff @tab second col stuff
2064
% @tab Many paragraphs of text may be used in any column.
2066
% They will wrap at the width determined by the template.
2067
% @item@tab@tab This will be in third column.
2070
% Default dimensions may be reset by user.
2071
% @multitableparskip is vertical space between paragraphs in table.
2072
% @multitableparindent is paragraph indent in table.
2073
% @multitablecolmargin is horizontal space to be left between columns.
2074
% @multitablelinespace is space to leave between table items, baseline
2076
% 0pt means it depends on current normal line spacing.
2078
\newskip\multitableparskip
2079
\newskip\multitableparindent
2080
\newdimen\multitablecolspace
2081
\newskip\multitablelinespace
2082
\multitableparskip=0pt
2083
\multitableparindent=6pt
2084
\multitablecolspace=12pt
2085
\multitablelinespace=0pt
2087
% Macros used to set up halign preamble:
2089
\let\endsetuptable\relax
2090
\def\xendsetuptable{\endsetuptable}
2091
\let\columnfractions\relax
2092
\def\xcolumnfractions{\columnfractions}
2095
% #1 is the part of the @columnfraction before the decimal point, which
2096
% is presumably either 0 or the empty string (but we don't check, we
2097
% just throw it away). #2 is the decimal part, which we use as the
2098
% percent of \hsize for this column.
2099
\def\pickupwholefraction#1.#2 {%
2100
\global\advance\colcount by 1
2101
\expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}%
2108
\ifx\firstarg\xendsetuptable
2111
\ifx\firstarg\xcolumnfractions
2112
\global\setpercenttrue
2115
\let\go\pickupwholefraction
2117
\global\advance\colcount by 1
2118
\setbox0=\hbox{#1\unskip }% Add a normal word space as a separator;
2119
% typically that is always in the input, anyway.
2120
\expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
2123
\ifx\go\pickupwholefraction
2124
% Put the argument back for the \pickupwholefraction call, so
2125
% we'll always have a period there to be parsed.
2126
\def\go{\pickupwholefraction#1}%
2128
\let\go = \setuptable
2134
% This used to have \hskip1sp. But then the space in a template line is
2135
% not enough. That is bad. So let's go back to just & until we
2136
% encounter the problem it was intended to solve again.
2137
% --karl, nathan@acm.org, 20apr99.
2140
% @multitable ... @end multitable definitions:
2142
\def\multitable{\parsearg\dotable}
2143
\def\dotable#1{\bgroup
2148
\setmultitablespacing
2149
\parskip=\multitableparskip
2150
\parindent=\multitableparindent
2153
\def\Emultitable{\global\setpercentfalse\cr\egroup\egroup}%
2155
% To parse everything between @multitable and @item:
2156
\setuptable#1 \endsetuptable
2158
% \everycr will reset column counter, \colcount, at the end of
2159
% each line. Every column entry will cause \colcount to advance by one.
2160
% The table preamble
2161
% looks at the current \colcount to find the correct column width.
2164
% \filbreak%% keeps underfull box messages off when table breaks over pages.
2165
% Maybe so, but it also creates really weird page breaks when the table
2166
% breaks over pages. Wouldn't \vfil be better? Wait until the problem
2167
% manifests itself, so it can be fixed for real --karl.
2168
\global\colcount=0\relax}}%
2170
% This preamble sets up a generic column definition, which will
2171
% be used as many times as user calls for columns.
2172
% \vtop will set a single line and will also let text wrap and
2173
% continue for many paragraphs if desired.
2174
\halign\bgroup&\global\advance\colcount by 1\relax
2175
\multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
2177
% In order to keep entries from bumping into each other
2178
% we will add a \leftskip of \multitablecolspace to all columns after
2181
% If a template has been used, we will add \multitablecolspace
2182
% to the width of each template entry.
2184
% If the user has set preamble in terms of percent of \hsize we will
2185
% use that dimension as the width of the column, and the \leftskip
2186
% will keep entries from bumping into each other. Table will start at
2187
% left margin and final column will justify at right margin.
2189
% Make sure we don't inherit \rightskip from the outer environment.
2192
% The first column will be indented with the surrounding text.
2193
\advance\hsize by\leftskip
2196
% If user has not set preamble in terms of percent of \hsize
2197
% we will advance \hsize by \multitablecolspace.
2198
\advance\hsize by \multitablecolspace
2200
% In either case we will make \leftskip=\multitablecolspace:
2201
\leftskip=\multitablecolspace
2203
% Ignoring space at the beginning and end avoids an occasional spurious
2204
% blank line, when TeX decides to break the line at the space before the
2205
% box from the multistrut, so the strut ends up on a line by itself.
2207
% @multitable @columnfractions .11 .89
2209
% @tab Legal holiday which is valid in major parts of the whole country.
2210
% Is automatically provided with highlighting sequences respectively marking
2212
\noindent\ignorespaces##\unskip\multistrut}\cr
2215
\def\setmultitablespacing{% test to see if user has set \multitablelinespace.
2216
% If so, do nothing. If not, give it an appropriate dimension based on
2217
% current baselineskip.
2218
\ifdim\multitablelinespace=0pt
2219
\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
2220
\global\advance\multitablelinespace by-\ht0
2221
%% strut to put in table in case some entry doesn't have descenders,
2222
%% to keep lines equally spaced
2223
\let\multistrut = \strut
2225
%% FIXME: what is \box0 supposed to be?
2226
\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
2228
%% Test to see if parskip is larger than space between lines of
2229
%% table. If not, do nothing.
2230
%% If so, set to same dimension as multitablelinespace.
2231
\ifdim\multitableparskip>\multitablelinespace
2232
\global\multitableparskip=\multitablelinespace
2233
\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
2234
%% than skip between lines in the table.
2236
\ifdim\multitableparskip=0pt
2237
\global\multitableparskip=\multitablelinespace
2238
\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
2239
%% than skip between lines in the table.
2243
\message{conditionals,}
2244
% Prevent errors for section commands.
2245
% Used in @ignore and in failing conditionals.
2246
\def\ignoresections{%
2248
\let\unnumbered=\relax
2250
\let\unnumberedsec=\relax
2251
\let\unnumberedsection=\relax
2252
\let\unnumberedsubsec=\relax
2253
\let\unnumberedsubsection=\relax
2254
\let\unnumberedsubsubsec=\relax
2255
\let\unnumberedsubsubsection=\relax
2258
\let\subsubsec=\relax
2259
\let\subsection=\relax
2260
\let\subsubsection=\relax
2261
\let\appendix=\relax
2262
\let\appendixsec=\relax
2263
\let\appendixsection=\relax
2264
\let\appendixsubsec=\relax
2265
\let\appendixsubsection=\relax
2266
\let\appendixsubsubsec=\relax
2267
\let\appendixsubsubsection=\relax
2268
\let\contents=\relax
2269
\let\smallbook=\relax
2270
\let\titlepage=\relax
2273
% Used in nested conditionals, where we have to parse the Texinfo source
2274
% and so want to turn off most commands, in case they are used
2277
\def\ignoremorecommands{%
2278
\let\defcodeindex = \relax
2281
\let\deffnx = \relax
2282
\let\defindex = \relax
2283
\let\defivar = \relax
2284
\let\defmac = \relax
2285
\let\defmethod = \relax
2287
\let\defopt = \relax
2288
\let\defspec = \relax
2290
\let\deftypefn = \relax
2291
\let\deftypefun = \relax
2292
\let\deftypeivar = \relax
2293
\let\deftypeop = \relax
2294
\let\deftypevar = \relax
2295
\let\deftypevr = \relax
2297
\let\defvar = \relax
2301
\let\printindex = \relax
2303
\let\settitle = \relax
2304
\let\setchapternewpage = \relax
2305
\let\setchapterstyle = \relax
2306
\let\everyheading = \relax
2307
\let\evenheading = \relax
2308
\let\oddheading = \relax
2309
\let\everyfooting = \relax
2310
\let\evenfooting = \relax
2311
\let\oddfooting = \relax
2312
\let\headings = \relax
2313
\let\include = \relax
2314
\let\lowersections = \relax
2316
\let\raisesections = \relax
2323
% Ignore @ignore ... @end ignore.
2325
\def\ignore{\doignore{ignore}}
2327
% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text.
2329
\def\ifinfo{\doignore{ifinfo}}
2330
\def\ifhtml{\doignore{ifhtml}}
2331
\def\ifnottex{\doignore{ifnottex}}
2332
\def\html{\doignore{html}}
2333
\def\menu{\doignore{menu}}
2334
\def\direntry{\doignore{direntry}}
2336
% @dircategory CATEGORY -- specify a category of the dir file
2337
% which this file should belong to. Ignore this in TeX.
2338
\let\dircategory = \comment
2340
% Ignore text until a line `@end #1'.
2342
\def\doignore#1{\begingroup
2343
% Don't complain about control sequences we have declared \outer.
2346
% Define a command to swallow text until we reach `@end #1'.
2347
% This @ is a catcode 12 token (that is the normal catcode of @ in
2348
% this texinfo.tex file). We change the catcode of @ below to match.
2349
\long\def\doignoretext##1@end #1{\enddoignore}%
2351
% Make sure that spaces turn into tokens that match what \doignoretext wants.
2354
% Ignore braces, too, so mismatched braces don't cause trouble.
2358
% We must not have @c interpreted as a control sequence.
2361
% Make the letter c a comment character so that the rest of the line
2362
% will be ignored. This way, the document can have (for example)
2364
% and the @end ifinfo will be properly ignored.
2365
% (We've just changed @ to catcode 12.)
2368
% And now expand that command.
2372
% What we do to finish off ignored text.
2374
\def\enddoignore{\endgroup\ignorespaces}%
2376
\newif\ifwarnedobs\warnedobsfalse
2378
\ifwarnedobs\relax\else
2379
% We need to warn folks that they may have trouble with TeX 3.0.
2380
% This uses \immediate\write16 rather than \message to get newlines.
2381
\immediate\write16{}
2382
\immediate\write16{WARNING: for users of Unix TeX 3.0!}
2383
\immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).}
2384
\immediate\write16{If you are running another version of TeX, relax.}
2385
\immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.}
2386
\immediate\write16{ Then upgrade your TeX installation if you can.}
2387
\immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)}
2388
\immediate\write16{If you are stuck with version 3.0, run the}
2389
\immediate\write16{ script ``tex3patch'' from the Texinfo distribution}
2390
\immediate\write16{ to use a workaround.}
2391
\immediate\write16{}
2392
\global\warnedobstrue
2396
% **In TeX 3.0, setting text in \nullfont hangs tex. For a
2397
% workaround (which requires the file ``dummy.tfm'' to be installed),
2398
% uncomment the following line:
2399
%%%%%\font\nullfont=dummy\let\obstexwarn=\relax
2401
% Ignore text, except that we keep track of conditional commands for
2402
% purposes of nesting, up to an `@end #1' command.
2404
\def\nestedignore#1{%
2406
% We must actually expand the ignored text to look for the @end
2407
% command, so that nested ignore constructs work. Thus, we put the
2408
% text into a \vbox and then do nothing with the result. To minimize
2409
% the change of memory overflow, we follow the approach outlined on
2410
% page 401 of the TeXbook: make the current font be a dummy font.
2412
\setbox0 = \vbox\bgroup
2413
% Don't complain about control sequences we have declared \outer.
2416
% Define `@end #1' to end the box, which will in turn undefine the
2417
% @end command again.
2418
\expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}%
2420
% We are going to be parsing Texinfo commands. Most cause no
2421
% trouble when they are used incorrectly, but some commands do
2422
% complicated argument parsing or otherwise get confused, so we
2425
% We can't do anything about stray @-signs, unfortunately;
2426
% they'll produce `undefined control sequence' errors.
2429
% Set the current font to be \nullfont, a TeX primitive, and define
2430
% all the font commands to also use \nullfont. We don't use
2431
% dummy.tfm, as suggested in the TeXbook, because not all sites
2432
% might have that installed. Therefore, math mode will still
2433
% produce output, but that should be an extremely small amount of
2434
% stuff compared to the main input.
2437
\let\tenrm=\nullfont \let\tenit=\nullfont \let\tensl=\nullfont
2438
\let\tenbf=\nullfont \let\tentt=\nullfont \let\smallcaps=\nullfont
2439
\let\tensf=\nullfont
2440
% Similarly for index fonts (mostly for their use in smallexample).
2441
\let\smallrm=\nullfont \let\smallit=\nullfont \let\smallsl=\nullfont
2442
\let\smallbf=\nullfont \let\smalltt=\nullfont \let\smallsc=\nullfont
2443
\let\smallsf=\nullfont
2445
% Don't complain when characters are missing from the fonts.
2446
\tracinglostchars = 0
2448
% Don't bother to do space factor calculations.
2451
% Don't report underfull hboxes.
2454
% Do minimal line-breaking.
2455
\pretolerance = 10000
2457
% Do not execute instructions in @tex
2458
\def\tex{\doignore{tex}}%
2459
% Do not execute macro definitions.
2460
% `c' is a comment character, so the word `macro' will get cut off.
2461
\def\macro{\doignore{ma}}%
2464
% @set VAR sets the variable VAR to an empty value.
2465
% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
2467
% Since we want to separate VAR from REST-OF-LINE (which might be
2468
% empty), we can't just use \parsearg; we have to insert a space of our
2469
% own to delimit the rest of the line, and then take it out again if we
2470
% didn't need it. Make sure the catcode of space is correct to avoid
2471
% losing inside @example, for instance.
2473
\def\set{\begingroup\catcode` =10
2474
\catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
2476
\def\setxxx#1{\setyyy#1 \endsetyyy}
2477
\def\setyyy#1 #2\endsetyyy{%
2479
\ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
2480
\else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
2484
% Can't use \xdef to pre-expand #2 and save some time, since \temp or
2485
% \next or other control sequences that we've defined might get us into
2486
% an infinite loop. Consider `@set foo @cite{bar}'.
2487
\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
2489
% @clear VAR clears (i.e., unsets) the variable VAR.
2491
\def\clear{\parsearg\clearxxx}
2492
\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
2494
% @value{foo} gets the text saved in variable foo.
2496
\catcode`\_ = \active
2498
% We might end up with active _ or - characters in the argument if
2499
% we're called from @code, as @code{@value{foo-bar_}}. So \let any
2500
% such active characters to their normal equivalents.
2501
\gdef\value{\begingroup
2502
\catcode`\-=12 \catcode`\_=12
2503
\indexbreaks \let_\normalunderscore
2506
\def\valuexxx#1{\expandablevalue{#1}\endgroup}
2508
% We have this subroutine so that we can handle at least some @value's
2509
% properly in indexes (we \let\value to this in \indexdummies). Ones
2510
% whose names contain - or _ still won't work, but we can't do anything
2511
% about that. The command has to be fully expandable, since the result
2512
% winds up in the index file. This means that if the variable's value
2513
% contains other Texinfo commands, it's almost certain it will fail
2514
% (although perhaps we could fix that with sufficient work to do a
2515
% one-level expansion on the result, instead of complete).
2517
\def\expandablevalue#1{%
2518
\expandafter\ifx\csname SET#1\endcsname\relax
2519
{[No value for ``#1'']}%
2521
\csname SET#1\endcsname
2525
% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
2528
\def\ifset{\parsearg\ifsetxxx}
2530
\expandafter\ifx\csname SET#1\endcsname\relax
2531
\expandafter\ifsetfail
2533
\expandafter\ifsetsucceed
2536
\def\ifsetsucceed{\conditionalsucceed{ifset}}
2537
\def\ifsetfail{\nestedignore{ifset}}
2538
\defineunmatchedend{ifset}
2540
% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
2541
% defined with @set, or has been undefined with @clear.
2543
\def\ifclear{\parsearg\ifclearxxx}
2544
\def\ifclearxxx #1{%
2545
\expandafter\ifx\csname SET#1\endcsname\relax
2546
\expandafter\ifclearsucceed
2548
\expandafter\ifclearfail
2551
\def\ifclearsucceed{\conditionalsucceed{ifclear}}
2552
\def\ifclearfail{\nestedignore{ifclear}}
2553
\defineunmatchedend{ifclear}
2555
% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text
2556
% following, through the first @end iftex (etc.). Make `@end iftex'
2557
% (etc.) valid only after an @iftex.
2559
\def\iftex{\conditionalsucceed{iftex}}
2560
\def\ifnothtml{\conditionalsucceed{ifnothtml}}
2561
\def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
2562
\defineunmatchedend{iftex}
2563
\defineunmatchedend{ifnothtml}
2564
\defineunmatchedend{ifnotinfo}
2566
% We can't just want to start a group at @iftex (for example) and end it
2567
% at @end iftex, since then @set commands inside the conditional have no
2568
% effect (they'd get reverted at the end of the group). So we must
2569
% define \Eiftex to redefine itself to be its previous value. (We can't
2570
% just define it to fail again with an ``unmatched end'' error, since
2571
% the @ifset might be nested.)
2573
\def\conditionalsucceed#1{%
2575
% Remember the current value of \E#1.
2576
\let\nece{prevE#1} = \nece{E#1}%
2578
% At the `@end #1', redefine \E#1 to be its previous value.
2579
\def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}%
2584
% We need to expand lots of \csname's, but we don't want to expand the
2585
% control sequences after we've constructed them.
2587
\def\nece#1{\expandafter\noexpand\csname#1\endcsname}
2589
% @defininfoenclose.
2590
\let\definfoenclose=\comment
2594
% Index generation facilities
2596
% Define \newwrite to be identical to plain tex's \newwrite
2597
% except not \outer, so it can be used within \newindex.
2599
\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}}
2601
% \newindex {foo} defines an index named foo.
2602
% It automatically defines \fooindex such that
2603
% \fooindex ...rest of line... puts an entry in the index foo.
2604
% It also defines \fooindfile to be the number of the output channel for
2605
% the file that accumulates this index. The file's extension is foo.
2606
% The name of an index should be no more than 2 characters long
2607
% for the sake of vms.
2611
\expandafter\newwrite \csname#1indfile\endcsname
2612
\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
2614
\expandafter\xdef\csname#1index\endcsname{% % Define @#1index
2615
\noexpand\doindex{#1}}
2618
% @defindex foo == \newindex{foo}
2620
\def\defindex{\parsearg\newindex}
2622
% Define @defcodeindex, like @defindex except put all entries in @code.
2624
\def\defcodeindex{\parsearg\newcodeindex}
2626
\def\newcodeindex#1{%
2628
\expandafter\newwrite \csname#1indfile\endcsname
2629
\openout \csname#1indfile\endcsname \jobname.#1
2631
\expandafter\xdef\csname#1index\endcsname{%
2632
\noexpand\docodeindex{#1}}%
2636
% @synindex foo bar makes index foo feed into index bar.
2637
% Do this instead of @defindex foo if you don't want it as a separate index.
2639
% @syncodeindex foo bar similar, but put all entries made for index foo
2642
\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
2643
\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
2645
% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
2646
% #3 the target index (bar).
2647
\def\dosynindex#1#2#3{%
2648
% Only do \closeout if we haven't already done it, else we'll end up
2649
% closing the target index.
2650
\expandafter \ifx\csname donesynindex#2\endcsname \undefined
2651
% The \closeout helps reduce unnecessary open files; the limit on the
2652
% Acorn RISC OS is a mere 16 files.
2653
\expandafter\closeout\csname#2indfile\endcsname
2654
\expandafter\let\csname\donesynindex#2\endcsname = 1
2656
% redefine \fooindfile:
2657
\expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
2658
\expandafter\let\csname#2indfile\endcsname=\temp
2659
% redefine \fooindex:
2660
\expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
2663
% Define \doindex, the driver for all \fooindex macros.
2664
% Argument #1 is generated by the calling \fooindex macro,
2665
% and it is "foo", the name of the index.
2667
% \doindex just uses \parsearg; it calls \doind for the actual work.
2668
% This is because \doind is more useful to call from other macros.
2670
% There is also \dosubind {index}{topic}{subtopic}
2671
% which makes an entry in a two-level index such as the operation index.
2673
\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
2674
\def\singleindexer #1{\doind{\indexname}{#1}}
2676
% like the previous two, but they put @code around the argument.
2677
\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
2678
\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
2682
% Take care of the plain tex accent commands.
2683
\def\"{\realbackslash "}%
2684
\def\`{\realbackslash `}%
2685
\def\'{\realbackslash '}%
2686
\def\^{\realbackslash ^}%
2687
\def\~{\realbackslash ~}%
2688
\def\={\realbackslash =}%
2689
\def\b{\realbackslash b}%
2690
\def\c{\realbackslash c}%
2691
\def\d{\realbackslash d}%
2692
\def\u{\realbackslash u}%
2693
\def\v{\realbackslash v}%
2694
\def\H{\realbackslash H}%
2695
% Take care of the plain tex special European modified letters.
2696
\def\oe{\realbackslash oe}%
2697
\def\ae{\realbackslash ae}%
2698
\def\aa{\realbackslash aa}%
2699
\def\OE{\realbackslash OE}%
2700
\def\AE{\realbackslash AE}%
2701
\def\AA{\realbackslash AA}%
2702
\def\o{\realbackslash o}%
2703
\def\O{\realbackslash O}%
2704
\def\l{\realbackslash l}%
2705
\def\L{\realbackslash L}%
2706
\def\ss{\realbackslash ss}%
2707
% Take care of texinfo commands likely to appear in an index entry.
2708
% (Must be a way to avoid doing expansion at all, and thus not have to
2709
% laboriously list every single command here.)
2710
\def\@{@}% will be @@ when we switch to @ as escape char.
2711
% Need these in case \tex is in effect and \{ is a \delimiter again.
2712
% But can't use \lbracecmd and \rbracecmd because texindex assumes
2713
% braces and backslashes are used only as delimiters.
2716
\def\_{{\realbackslash _}}%
2717
\def\w{\realbackslash w }%
2718
\def\bf{\realbackslash bf }%
2719
%\def\rm{\realbackslash rm }%
2720
\def\sl{\realbackslash sl }%
2721
\def\sf{\realbackslash sf}%
2722
\def\tt{\realbackslash tt}%
2723
\def\gtr{\realbackslash gtr}%
2724
\def\less{\realbackslash less}%
2725
\def\hat{\realbackslash hat}%
2726
\def\TeX{\realbackslash TeX}%
2727
\def\dots{\realbackslash dots }%
2728
\def\result{\realbackslash result}%
2729
\def\equiv{\realbackslash equiv}%
2730
\def\expansion{\realbackslash expansion}%
2731
\def\print{\realbackslash print}%
2732
\def\error{\realbackslash error}%
2733
\def\point{\realbackslash point}%
2734
\def\copyright{\realbackslash copyright}%
2735
\def\tclose##1{\realbackslash tclose {##1}}%
2736
\def\code##1{\realbackslash code {##1}}%
2737
\def\uref##1{\realbackslash uref {##1}}%
2738
\def\url##1{\realbackslash url {##1}}%
2739
\def\env##1{\realbackslash env {##1}}%
2740
\def\command##1{\realbackslash command {##1}}%
2741
\def\option##1{\realbackslash option {##1}}%
2742
\def\dotless##1{\realbackslash dotless {##1}}%
2743
\def\samp##1{\realbackslash samp {##1}}%
2744
\def\,##1{\realbackslash ,{##1}}%
2745
\def\t##1{\realbackslash t {##1}}%
2746
\def\r##1{\realbackslash r {##1}}%
2747
\def\i##1{\realbackslash i {##1}}%
2748
\def\b##1{\realbackslash b {##1}}%
2749
\def\sc##1{\realbackslash sc {##1}}%
2750
\def\cite##1{\realbackslash cite {##1}}%
2751
\def\key##1{\realbackslash key {##1}}%
2752
\def\file##1{\realbackslash file {##1}}%
2753
\def\var##1{\realbackslash var {##1}}%
2754
\def\kbd##1{\realbackslash kbd {##1}}%
2755
\def\dfn##1{\realbackslash dfn {##1}}%
2756
\def\emph##1{\realbackslash emph {##1}}%
2757
\def\acronym##1{\realbackslash acronym {##1}}%
2759
% Handle some cases of @value -- where the variable name does not
2760
% contain - or _, and the value does not contain any
2761
% (non-fully-expandable) commands.
2762
\let\value = \expandablevalue
2765
% Turn off macro expansion
2769
% If an index command is used in an @example environment, any spaces
2770
% therein should become regular spaces in the raw index file, not the
2771
% expansion of \tie (\\leavevmode \penalty \@M \ ).
2773
\gdef\unsepspaces{\obeyspaces\let =\space}}
2775
% \indexnofonts no-ops all font-change commands.
2776
% This is used when outputting the strings to sort the index by.
2777
\def\indexdummyfont#1{#1}
2778
\def\indexdummytex{TeX}
2779
\def\indexdummydots{...}
2782
% Just ignore accents.
2783
\let\,=\indexdummyfont
2784
\let\"=\indexdummyfont
2785
\let\`=\indexdummyfont
2786
\let\'=\indexdummyfont
2787
\let\^=\indexdummyfont
2788
\let\~=\indexdummyfont
2789
\let\==\indexdummyfont
2790
\let\b=\indexdummyfont
2791
\let\c=\indexdummyfont
2792
\let\d=\indexdummyfont
2793
\let\u=\indexdummyfont
2794
\let\v=\indexdummyfont
2795
\let\H=\indexdummyfont
2796
\let\dotless=\indexdummyfont
2797
% Take care of the plain tex special European modified letters.
2809
\let\w=\indexdummyfont
2810
\let\t=\indexdummyfont
2811
\let\r=\indexdummyfont
2812
\let\i=\indexdummyfont
2813
\let\b=\indexdummyfont
2814
\let\emph=\indexdummyfont
2815
\let\strong=\indexdummyfont
2816
\let\cite=\indexdummyfont
2817
\let\sc=\indexdummyfont
2818
%Don't no-op \tt, since it isn't a user-level command
2819
% and is used in the definitions of the active chars like <, >, |...
2820
%\let\tt=\indexdummyfont
2821
\let\tclose=\indexdummyfont
2822
\let\code=\indexdummyfont
2823
\let\url=\indexdummyfont
2824
\let\uref=\indexdummyfont
2825
\let\env=\indexdummyfont
2826
\let\acronym=\indexdummyfont
2827
\let\command=\indexdummyfont
2828
\let\option=\indexdummyfont
2829
\let\file=\indexdummyfont
2830
\let\samp=\indexdummyfont
2831
\let\kbd=\indexdummyfont
2832
\let\key=\indexdummyfont
2833
\let\var=\indexdummyfont
2834
\let\TeX=\indexdummytex
2835
\let\dots=\indexdummydots
2839
% To define \realbackslash, we must make \ not be an escape.
2840
% We must first make another character (@) an escape
2841
% so we do not become unable to do a definition.
2843
{\catcode`\@=0 \catcode`\\=\other
2844
@gdef@realbackslash{\}}
2846
\let\indexbackslash=0 %overridden during \printindex.
2847
\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
2849
% For \ifx comparisons.
2850
\def\emptymacro{\empty}
2852
% Most index entries go through here, but \dosubind is the general case.
2854
\def\doind#1#2{\dosubind{#1}{#2}\empty}
2856
% Workhorse for all \fooindexes.
2857
% #1 is name of index, #2 is stuff to put there, #3 is subentry --
2858
% \empty if called from \doind, as we usually are. The main exception
2859
% is with defuns, which call us directly.
2861
\def\dosubind#1#2#3{%
2862
% Put the index entry in the margin if desired.
2863
\ifx\SETmarginindex\relax\else
2864
\insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}%
2867
\count255=\lastpenalty
2869
\indexdummies % Must do this here, since \bf, etc expand at this stage
2872
\let\folio = 0% We will expand all macros now EXCEPT \folio.
2873
\def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
2874
% so it will be output as is; and it will print as backslash.
2878
% If third arg is present, precede it with space in sort key.
2879
\ifx\thirdarg\emptymacro
2880
\let\subentry = \empty
2885
% First process the index entry with all font commands turned
2886
% off to get the string to sort by.
2887
{\indexnofonts \xdef\indexsorttmp{#2\subentry}}%
2889
% Now the real index entry with the fonts.
2892
% If third (subentry) arg is present, add it to the index
2893
% string. And include a space.
2894
\ifx\thirdarg\emptymacro \else
2895
\toks0 = \expandafter{\the\toks0 \space #3}%
2898
% Set up the complete index entry, with both the sort key
2899
% and the original text, including any font commands. We write
2900
% three arguments to \entry to the .?? file, texindex reduces to
2901
% two when writing the .??s sorted result.
2903
\write\csname#1indfile\endcsname{%
2904
\realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}%
2907
% If a skip is the last thing on the list now, preserve it
2908
% by backing up by \lastskip, doing the \write, then inserting
2909
% the skip again. Otherwise, the whatsit generated by the
2910
% \write will make \lastskip zero. The result is that sequences
2915
% will have extra space inserted, because the \medbreak in the
2916
% start of the @defun won't see the skip inserted by the @end of
2917
% the previous defun.
2919
% But don't do any of this if we're not in vertical mode. We
2920
% don't want to do a \vskip and prematurely end a paragraph.
2922
% Avoid page breaks due to these extra skips, too.
2927
\ifdim\lastskip = 0pt \else \nobreak\vskip-\lastskip \fi
2930
\temp % do the write
2933
\ifvmode \ifdim\skip0 = 0pt \else \nobreak\vskip\skip0 \fi \fi
2941
% The index entry written in the file actually looks like
2942
% \entry {sortstring}{page}{topic}
2944
% \entry {sortstring}{page}{topic}{subtopic}
2945
% The texindex program reads in these files and writes files
2946
% containing these kinds of lines:
2948
% before the first topic whose initial is c
2949
% \entry {topic}{pagelist}
2950
% for a topic that is used without subtopics
2952
% for the beginning of a topic that is used with subtopics
2953
% \secondary {subtopic}{pagelist}
2954
% for each subtopic.
2956
% Define the user-accessible indexing commands
2957
% @findex, @vindex, @kindex, @cindex.
2959
\def\findex {\fnindex}
2960
\def\kindex {\kyindex}
2961
\def\cindex {\cpindex}
2962
\def\vindex {\vrindex}
2963
\def\tindex {\tpindex}
2964
\def\pindex {\pgindex}
2966
\def\cindexsub {\begingroup\obeylines\cindexsub}
2968
\gdef\cindexsub "#1" #2^^M{\endgroup %
2969
\dosubind{cp}{#2}{#1}}}
2971
% Define the macros used in formatting output of the sorted index material.
2973
% @printindex causes a particular index (the ??s file) to get printed.
2974
% It does not print any chapter heading (usually an @unnumbered).
2976
\def\printindex{\parsearg\doprintindex}
2977
\def\doprintindex#1{\begingroup
2978
\dobreak \chapheadingskip{10000}%
2984
% See if the index file exists and is nonempty.
2985
% Change catcode of @ here so that if the index file contains
2987
% as its first line, TeX doesn't complain about mismatched braces
2988
% (because it thinks @} is a control sequence).
2990
\openin 1 \jobname.#1s
2992
% \enddoublecolumns gets confused if there is no text in the index,
2993
% and it loses the chapter title and the aux file entries for the
2994
% index. The easiest way to prevent this problem is to make sure
2995
% there is some text.
2996
\putwordIndexNonexistent
2999
% If the index file exists but is empty, then \openin leaves \ifeof
3000
% false. We have to make TeX try to read something from the file, so
3001
% it can discover if there is anything in it.
3004
\putwordIndexIsEmpty
3006
% Index files are almost Texinfo source, but we use \ as the escape
3007
% character. It would be better to use @, but that's too big a change
3008
% to make right now.
3009
\def\indexbackslash{\rawbackslashxx}%
3020
% These macros are used by the sorted index file itself.
3021
% Change them to control the appearance of the index.
3024
% Some minor font changes for the special characters.
3025
\let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
3027
% Remove any glue we may have, we'll be inserting our own.
3030
% We like breaks before the index initials, so insert a bonus.
3033
% Typeset the initial. Making this add up to a whole number of
3034
% baselineskips increases the chance of the dots lining up from column
3035
% to column. It still won't often be perfect, because of the stretch
3036
% we need before each entry, but it's better.
3038
% No shrink because it confuses \balancecolumns.
3039
\vskip 1.67\baselineskip plus .5\baselineskip
3040
\leftline{\secbf #1}%
3041
\vskip .33\baselineskip plus .1\baselineskip
3043
% Do our best not to break after the initial.
3047
% This typesets a paragraph consisting of #1, dot leaders, and then #2
3048
% flush to the right margin. It is used for index and table of contents
3049
% entries. The paragraph is indented by \leftskip.
3051
\def\entry#1#2{\begingroup
3053
% Start a new paragraph if necessary, so our assignments below can't
3054
% affect previous text.
3057
% Do not fill out the last line with white space.
3060
% No extra space above this paragraph.
3063
% Do not prefer a separate line ending with a hyphen to fewer lines.
3064
\finalhyphendemerits = 0
3066
% \hangindent is only relevant when the entry text and page number
3067
% don't both fit on one line. In that case, bob suggests starting the
3068
% dots pretty far over on the line. Unfortunately, a large
3069
% indentation looks wrong when the entry text itself is broken across
3070
% lines. So we use a small indentation and put up with long leaders.
3072
% \hangafter is reset to 1 (which is the value we want) at the start
3073
% of each paragraph, so we need not do anything with that.
3076
% When the entry text needs to be broken, just fill out the first line
3078
\rightskip = 0pt plus1fil
3080
% A bit of stretch before each entry for the benefit of balancing columns.
3083
% Start a ``paragraph'' for the index entry so the line breaking
3084
% parameters we've set above will have an effect.
3087
% Insert the text of the index entry. TeX will do line-breaking on it.
3089
% The following is kludged to not output a line of dots in the index if
3090
% there are no page numbers. The next person who breaks this will be
3091
% cursed by a Unix daemon.
3094
\edef\tempc{\tempa}%
3095
\edef\tempd{\tempb}%
3096
\ifx\tempc\tempd\ \else%
3098
% If we must, put the page number on a line of its own, and fill out
3099
% this line with blank space. (The \hfil is overwhelmed with the
3100
% fill leaders glue in \indexdotfill if the page number does fit.)
3102
\null\nobreak\indexdotfill % Have leaders before the page number.
3104
% The `\ ' here is removed by the implicit \unskip that TeX does as
3105
% part of (the primitive) \par. Without it, a spurious underfull
3108
\pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
3110
\ #2% The page number ends the paragraph.
3116
% Like \dotfill except takes at least 1 em.
3117
\def\indexdotfill{\cleaders
3118
\hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill}
3120
\def\primary #1{\line{#1\hfil}}
3122
\newskip\secondaryindent \secondaryindent=0.5cm
3124
\def\secondary #1#2{
3125
{\parfillskip=0in \parskip=0in
3126
\hangindent =1in \hangafter=1
3127
\noindent\hskip\secondaryindent\hbox{#1}\indexdotfill #2\par
3130
% Define two-column mode, which we use to typeset indexes.
3131
% Adapted from the TeXbook, page 416, which is to say,
3132
% the manmac.tex format used to print the TeXbook itself.
3136
\newdimen\doublecolumnhsize
3138
\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
3139
% Grab any single-column material above us.
3142
% Here is a possibility not foreseen in manmac: if we accumulate a
3143
% whole lot of material, we might end up calling this \output
3144
% routine twice in a row (see the doublecol-lose test, which is
3145
% essentially a couple of indexes with @setchapternewpage off). In
3146
% that case we just ship out what is in \partialpage with the normal
3147
% output routine. Generally, \partialpage will be empty when this
3148
% runs and this will be a no-op. See the indexspread.tex test case.
3149
\ifvoid\partialpage \else
3150
\onepageout{\pagecontents\partialpage}%
3153
\global\setbox\partialpage = \vbox{%
3154
% Unvbox the main output page.
3156
\kern-\topskip \kern\baselineskip
3159
\eject % run that output routine to set \partialpage
3161
% Use the double-column output routine for subsequent pages.
3162
\output = {\doublecolumnout}%
3164
% Change the page size parameters. We could do this once outside this
3165
% routine, in each of @smallbook, @afourpaper, and the default 8.5x11
3166
% format, but then we repeat the same computation. Repeating a couple
3167
% of assignments once per index is clearly meaningless for the
3168
% execution time, so we may as well do it in one place.
3170
% First we halve the line length, less a little for the gutter between
3171
% the columns. We compute the gutter based on the line length, so it
3172
% changes automatically with the paper format. The magic constant
3173
% below is chosen so that the gutter has the same value (well, +-<1pt)
3174
% as it did when we hard-coded it.
3176
% We put the result in a separate register, \doublecolumhsize, so we
3177
% can restore it in \pagesofar, after \hsize itself has (potentially)
3180
\doublecolumnhsize = \hsize
3181
\advance\doublecolumnhsize by -.04154\hsize
3182
\divide\doublecolumnhsize by 2
3183
\hsize = \doublecolumnhsize
3185
% Double the \vsize as well. (We don't need a separate register here,
3186
% since nobody clobbers \vsize.)
3190
% The double-column output routine for all double-column pages except
3193
\def\doublecolumnout{%
3194
\splittopskip=\topskip \splitmaxdepth=\maxdepth
3195
% Get the available space for the double columns -- the normal
3196
% (undoubled) page height minus any material left over from the
3200
\advance\dimen@ by -\ht\partialpage
3202
% box0 will be the left-hand column, box2 the right.
3203
\setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
3204
\onepageout\pagesofar
3206
\penalty\outputpenalty
3209
% Re-output the contents of the output page -- any previous material,
3210
% followed by the two boxes we just split, in box0 and box2.
3214
\hsize = \doublecolumnhsize
3215
\wd0=\hsize \wd2=\hsize
3216
\hbox to\pagewidth{\box0\hfil\box2}%
3219
% All done with double columns.
3220
\def\enddoublecolumns{%
3222
% Split the last of the double-column material. Leave it on the
3223
% current page, no automatic page break.
3226
% If we end up splitting too much material for the current page,
3227
% though, there will be another page break right after this \output
3228
% invocation ends. Having called \balancecolumns once, we do not
3229
% want to call it again. Therefore, reset \output to its normal
3230
% definition right away. (We hope \balancecolumns will never be
3231
% called on to balance too much material, but if it is, this makes
3232
% the output somewhat more palatable.)
3233
\global\output = {\onepageout{\pagecontents\PAGE}}%
3236
\endgroup % started in \begindoublecolumns
3238
% \pagegoal was set to the doubled \vsize above, since we restarted
3239
% the current page. We're now back to normal single-column
3240
% typesetting, so reset \pagegoal to the normal \vsize (after the
3241
% \endgroup where \vsize got restored).
3245
% Called at the end of the double column material.
3246
\def\balancecolumns{%
3247
\setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
3249
\advance\dimen@ by \topskip
3250
\advance\dimen@ by-\baselineskip
3251
\divide\dimen@ by 2 % target to split to
3252
%debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}%
3253
\splittopskip = \topskip
3254
% Loop until we get a decent breakpoint.
3258
\global\setbox3 = \copy0
3259
\global\setbox1 = \vsplit3 to \dimen@
3261
\global\advance\dimen@ by 1pt
3264
%debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
3265
\setbox0=\vbox to\dimen@{\unvbox1}%
3266
\setbox2=\vbox to\dimen@{\unvbox3}%
3270
\catcode`\@ = \other
3273
\message{sectioning,}
3274
% Chapters, sections, etc.
3277
\newcount\secno \secno=0
3278
\newcount\subsecno \subsecno=0
3279
\newcount\subsubsecno \subsubsecno=0
3281
% This counter is funny since it counts through charcodes of letters A, B, ...
3282
\newcount\appendixno \appendixno = `\@
3283
% \def\appendixletter{\char\the\appendixno}
3284
% We do the following for the sake of pdftex, which needs the actual
3285
% letter in the expansion, not just typeset.
3286
\def\appendixletter{%
3287
\ifnum\appendixno=`A A%
3288
\else\ifnum\appendixno=`B B%
3289
\else\ifnum\appendixno=`C C%
3290
\else\ifnum\appendixno=`D D%
3291
\else\ifnum\appendixno=`E E%
3292
\else\ifnum\appendixno=`F F%
3293
\else\ifnum\appendixno=`G G%
3294
\else\ifnum\appendixno=`H H%
3295
\else\ifnum\appendixno=`I I%
3296
\else\ifnum\appendixno=`J J%
3297
\else\ifnum\appendixno=`K K%
3298
\else\ifnum\appendixno=`L L%
3299
\else\ifnum\appendixno=`M M%
3300
\else\ifnum\appendixno=`N N%
3301
\else\ifnum\appendixno=`O O%
3302
\else\ifnum\appendixno=`P P%
3303
\else\ifnum\appendixno=`Q Q%
3304
\else\ifnum\appendixno=`R R%
3305
\else\ifnum\appendixno=`S S%
3306
\else\ifnum\appendixno=`T T%
3307
\else\ifnum\appendixno=`U U%
3308
\else\ifnum\appendixno=`V V%
3309
\else\ifnum\appendixno=`W W%
3310
\else\ifnum\appendixno=`X X%
3311
\else\ifnum\appendixno=`Y Y%
3312
\else\ifnum\appendixno=`Z Z%
3313
% The \the is necessary, despite appearances, because \appendixletter is
3314
% expanded while writing the .toc file. \char\appendixno is not
3315
% expandable, thus it is written literally, thus all appendixes come out
3316
% with the same letter (or @) in the toc without it.
3317
\else\char\the\appendixno
3318
\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
3319
\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
3321
% Each @chapter defines this as the name of the chapter.
3322
% page headings and footings can use it. @section does likewise.
3326
\newcount\absseclevel % used to calculate proper heading level
3327
\newcount\secbase\secbase=0 % @raise/lowersections modify this count
3329
% @raisesections: treat @section as chapter, @subsection as section, etc.
3330
\def\raisesections{\global\advance\secbase by -1}
3331
\let\up=\raisesections % original BFox name
3333
% @lowersections: treat @chapter as section, @section as subsection, etc.
3334
\def\lowersections{\global\advance\secbase by 1}
3335
\let\down=\lowersections % original BFox name
3337
% Choose a numbered-heading macro
3338
% #1 is heading level if unmodified by @raisesections or @lowersections
3339
% #2 is text for heading
3340
\def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
3346
\numberedsubseczzz{#2}
3348
\numberedsubsubseczzz{#2}
3350
\ifnum \absseclevel<0
3353
\numberedsubsubseczzz{#2}
3358
% like \numhead, but chooses appendix heading levels
3359
\def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
3363
\appendixsectionzzz{#2}
3365
\appendixsubseczzz{#2}
3367
\appendixsubsubseczzz{#2}
3369
\ifnum \absseclevel<0
3372
\appendixsubsubseczzz{#2}
3377
% like \numhead, but chooses numberless heading levels
3378
\def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
3382
\unnumberedseczzz{#2}
3384
\unnumberedsubseczzz{#2}
3386
\unnumberedsubsubseczzz{#2}
3388
\ifnum \absseclevel<0
3391
\unnumberedsubsubseczzz{#2}
3396
% @chapter, @appendix, @unnumbered.
3397
\def\thischaptername{No Chapter Title}
3398
\outer\def\chapter{\parsearg\chapteryyy}
3399
\def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz
3400
\def\chapterzzz #1{%
3401
\secno=0 \subsecno=0 \subsubsecno=0
3402
\global\advance \chapno by 1 \message{\putwordChapter\space \the\chapno}%
3403
\chapmacro {#1}{\the\chapno}%
3404
\gdef\thissection{#1}%
3405
\gdef\thischaptername{#1}%
3406
% We don't substitute the actual chapter name into \thischapter
3407
% because we don't want its macros evaluated now.
3408
\xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}%
3410
\edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}%
3414
\global\let\section = \numberedsec
3415
\global\let\subsection = \numberedsubsec
3416
\global\let\subsubsection = \numberedsubsubsec
3419
\outer\def\appendix{\parsearg\appendixyyy}
3420
\def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz
3421
\def\appendixzzz #1{%
3422
\secno=0 \subsecno=0 \subsubsecno=0
3423
\global\advance \appendixno by 1
3424
\message{\putwordAppendix\space \appendixletter}%
3425
\chapmacro {#1}{\putwordAppendix{} \appendixletter}%
3426
\gdef\thissection{#1}%
3427
\gdef\thischaptername{#1}%
3428
\xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}%
3430
\edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}%
3431
{\putwordAppendix{} \appendixletter}}}%
3434
\global\let\section = \appendixsec
3435
\global\let\subsection = \appendixsubsec
3436
\global\let\subsubsection = \appendixsubsubsec
3439
% @centerchap is like @unnumbered, but the heading is centered.
3440
\outer\def\centerchap{\parsearg\centerchapyyy}
3441
\def\centerchapyyy #1{{\let\unnumbchapmacro=\centerchapmacro \unnumberedyyy{#1}}}
3443
% @top is like @unnumbered.
3444
\outer\def\top{\parsearg\unnumberedyyy}
3446
\outer\def\unnumbered{\parsearg\unnumberedyyy}
3447
\def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
3448
\def\unnumberedzzz #1{%
3449
\secno=0 \subsecno=0 \subsubsecno=0
3451
% This used to be simply \message{#1}, but TeX fully expands the
3452
% argument to \message. Therefore, if #1 contained @-commands, TeX
3453
% expanded them. For example, in `@unnumbered The @cite{Book}', TeX
3454
% expanded @cite (which turns out to cause errors because \cite is meant
3455
% to be executed, not expanded).
3457
% Anyway, we don't want the fully-expanded definition of @cite to appear
3458
% as a result of the \message, we just want `@cite' itself. We use
3459
% \the<toks register> to achieve this: TeX expands \the<toks> only once,
3460
% simply yielding the contents of <toks register>. (We also do this for
3462
\toks0 = {#1}\message{(\the\toks0)}%
3464
\unnumbchapmacro {#1}%
3465
\gdef\thischapter{#1}\gdef\thissection{#1}%
3467
\edef\temp{\noexpand\writetocentry{\realbackslash unnumbchapentry{\the\toks0}}}%
3470
\global\let\section = \unnumberedsec
3471
\global\let\subsection = \unnumberedsubsec
3472
\global\let\subsubsection = \unnumberedsubsubsec
3476
\outer\def\numberedsec{\parsearg\secyyy}
3477
\def\secyyy #1{\numhead1{#1}} % normally calls seczzz
3479
\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
3480
\gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}%
3482
\edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}%
3483
{\the\chapno}{\the\secno}}}%
3489
\outer\def\appendixsection{\parsearg\appendixsecyyy}
3490
\outer\def\appendixsec{\parsearg\appendixsecyyy}
3491
\def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz
3492
\def\appendixsectionzzz #1{%
3493
\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
3494
\gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}%
3496
\edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}%
3497
{\appendixletter}{\the\secno}}}%
3503
\outer\def\unnumberedsec{\parsearg\unnumberedsecyyy}
3504
\def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz
3505
\def\unnumberedseczzz #1{%
3506
\plainsecheading {#1}\gdef\thissection{#1}%
3508
\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsecentry{\the\toks0}}}%
3515
\outer\def\numberedsubsec{\parsearg\numberedsubsecyyy}
3516
\def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz
3517
\def\numberedsubseczzz #1{%
3518
\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
3519
\subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}%
3521
\edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}%
3522
{\the\chapno}{\the\secno}{\the\subsecno}}}%
3528
\outer\def\appendixsubsec{\parsearg\appendixsubsecyyy}
3529
\def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz
3530
\def\appendixsubseczzz #1{%
3531
\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
3532
\subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}%
3534
\edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}%
3535
{\appendixletter}{\the\secno}{\the\subsecno}}}%
3541
\outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy}
3542
\def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
3543
\def\unnumberedsubseczzz #1{%
3544
\plainsubsecheading {#1}\gdef\thissection{#1}%
3546
\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsecentry%
3554
\outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy}
3555
\def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz
3556
\def\numberedsubsubseczzz #1{%
3557
\gdef\thissection{#1}\global\advance \subsubsecno by 1 %
3558
\subsubsecheading {#1}
3559
{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
3561
\edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}%
3562
{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}%
3568
\outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy}
3569
\def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz
3570
\def\appendixsubsubseczzz #1{%
3571
\gdef\thissection{#1}\global\advance \subsubsecno by 1 %
3572
\subsubsecheading {#1}
3573
{\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
3575
\edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}%
3576
{\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}%
3582
\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy}
3583
\def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
3584
\def\unnumberedsubsubseczzz #1{%
3585
\plainsubsubsecheading {#1}\gdef\thissection{#1}%
3587
\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsubsecentry%
3594
% These are variants which are not "outer", so they can appear in @ifinfo.
3595
% Actually, they should now be obsolete; ordinary section commands should work.
3596
\def\infotop{\parsearg\unnumberedzzz}
3597
\def\infounnumbered{\parsearg\unnumberedzzz}
3598
\def\infounnumberedsec{\parsearg\unnumberedseczzz}
3599
\def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz}
3600
\def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz}
3602
\def\infoappendix{\parsearg\appendixzzz}
3603
\def\infoappendixsec{\parsearg\appendixseczzz}
3604
\def\infoappendixsubsec{\parsearg\appendixsubseczzz}
3605
\def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz}
3607
\def\infochapter{\parsearg\chapterzzz}
3608
\def\infosection{\parsearg\sectionzzz}
3609
\def\infosubsection{\parsearg\subsectionzzz}
3610
\def\infosubsubsection{\parsearg\subsubsectionzzz}
3612
% These macros control what the section commands do, according
3613
% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
3614
% Define them by default for a numbered chapter.
3615
\global\let\section = \numberedsec
3616
\global\let\subsection = \numberedsubsec
3617
\global\let\subsubsection = \numberedsubsubsec
3619
% Define @majorheading, @heading and @subheading
3621
% NOTE on use of \vbox for chapter headings, section headings, and such:
3622
% 1) We use \vbox rather than the earlier \line to permit
3623
% overlong headings to fold.
3624
% 2) \hyphenpenalty is set to 10000 because hyphenation in a
3625
% heading is obnoxious; this forbids it.
3626
% 3) Likewise, headings look best if no \parindent is used, and
3627
% if justification is not attempted. Hence \raggedright.
3630
\def\majorheading{\parsearg\majorheadingzzz}
3631
\def\majorheadingzzz #1{%
3632
{\advance\chapheadingskip by 10pt \chapbreak }%
3633
{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3634
\parindent=0pt\raggedright
3635
\rm #1\hfill}}\bigskip \par\penalty 200}
3637
\def\chapheading{\parsearg\chapheadingzzz}
3638
\def\chapheadingzzz #1{\chapbreak %
3639
{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3640
\parindent=0pt\raggedright
3641
\rm #1\hfill}}\bigskip \par\penalty 200}
3643
% @heading, @subheading, @subsubheading.
3644
\def\heading{\parsearg\plainsecheading}
3645
\def\subheading{\parsearg\plainsubsecheading}
3646
\def\subsubheading{\parsearg\plainsubsubsecheading}
3648
% These macros generate a chapter, section, etc. heading only
3649
% (including whitespace, linebreaking, etc. around it),
3650
% given all the information in convenient, parsed form.
3652
%%% Args are the skip and penalty (usually negative)
3653
\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
3655
\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
3657
%%% Define plain chapter starts, and page on/off switching for it
3658
% Parameter controlling skip before chapter headings (if needed)
3660
\newskip\chapheadingskip
3662
\def\chapbreak{\dobreak \chapheadingskip {-4000}}
3663
\def\chappager{\par\vfill\supereject}
3664
\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi}
3666
\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
3669
\global\let\contentsalignmacro = \chappager
3670
\global\let\pchapsepmacro=\chapbreak
3671
\global\let\pagealignmacro=\chappager}
3674
\global\let\contentsalignmacro = \chappager
3675
\global\let\pchapsepmacro=\chappager
3676
\global\let\pagealignmacro=\chappager
3677
\global\def\HEADINGSon{\HEADINGSsingle}}
3680
\global\let\contentsalignmacro = \chapoddpage
3681
\global\let\pchapsepmacro=\chapoddpage
3682
\global\let\pagealignmacro=\chapoddpage
3683
\global\def\HEADINGSon{\HEADINGSdouble}}
3688
\global\let\chapmacro=\chfplain
3689
\global\let\unnumbchapmacro=\unnchfplain
3690
\global\let\centerchapmacro=\centerchfplain}
3692
% Plain chapter opening.
3693
% #1 is the text, #2 the chapter number or empty if unnumbered.
3699
\setbox0 = \hbox{#2\ifx\chapnum\empty\else\enspace\fi}%
3700
\vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
3701
\hangindent = \wd0 \centerparametersmaybe
3704
\nobreak\bigskip % no page break after a chapter title
3708
% Plain opening for unnumbered.
3709
\def\unnchfplain#1{\chfplain{#1}{}}
3711
% @centerchap -- centered and unnumbered.
3712
\let\centerparametersmaybe = \relax
3713
\def\centerchfplain#1{{%
3714
\def\centerparametersmaybe{%
3715
\advance\rightskip by 3\rightskip
3716
\leftskip = \rightskip
3722
\CHAPFplain % The default
3724
\def\unnchfopen #1{%
3725
\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3726
\parindent=0pt\raggedright
3727
\rm #1\hfill}}\bigskip \par\nobreak
3730
\def\chfopen #1#2{\chapoddpage {\chapfonts
3731
\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
3735
\def\centerchfopen #1{%
3736
\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3738
\hfill {\rm #1}\hfill}}\bigskip \par\nobreak
3742
\global\let\chapmacro=\chfopen
3743
\global\let\unnumbchapmacro=\unnchfopen
3744
\global\let\centerchapmacro=\centerchfopen}
3748
\newskip\secheadingskip
3749
\def\secheadingbreak{\dobreak \secheadingskip {-1000}}
3750
\def\secheading#1#2#3{\sectionheading{sec}{#2.#3}{#1}}
3751
\def\plainsecheading#1{\sectionheading{sec}{}{#1}}
3753
% Subsection titles.
3754
\newskip \subsecheadingskip
3755
\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}}
3756
\def\subsecheading#1#2#3#4{\sectionheading{subsec}{#2.#3.#4}{#1}}
3757
\def\plainsubsecheading#1{\sectionheading{subsec}{}{#1}}
3759
% Subsubsection titles.
3760
\let\subsubsecheadingskip = \subsecheadingskip
3761
\let\subsubsecheadingbreak = \subsecheadingbreak
3762
\def\subsubsecheading#1#2#3#4#5{\sectionheading{subsubsec}{#2.#3.#4.#5}{#1}}
3763
\def\plainsubsubsecheading#1{\sectionheading{subsubsec}{}{#1}}
3766
% Print any size section title.
3768
% #1 is the section type (sec/subsec/subsubsec), #2 is the section
3769
% number (maybe empty), #3 the text.
3770
\def\sectionheading#1#2#3{%
3772
\expandafter\advance\csname #1headingskip\endcsname by \parskip
3773
\csname #1headingbreak\endcsname
3776
% Switch to the right set of fonts.
3777
\csname #1fonts\endcsname \rm
3779
% Only insert the separating space if we have a section number.
3781
\setbox0 = \hbox{#2\ifx\secnum\empty\else\enspace\fi}%
3783
\vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
3784
\hangindent = \wd0 % zero if no section number
3787
\ifdim\parskip<10pt \nobreak\kern10pt\nobreak\kern-\parskip\fi \nobreak
3792
% Table of contents.
3795
% Write an entry to the toc file, opening it if necessary.
3796
% Called from @chapter, etc. We supply {\folio} at the end of the
3797
% argument, which will end up as the last argument to the \...entry macro.
3799
% We open the .toc file here instead of at @setfilename or any other
3800
% given time so that @contents can be put in the document anywhere.
3802
\newif\iftocfileopened
3803
\def\writetocentry#1{%
3804
\iftocfileopened\else
3805
\immediate\openout\tocfile = \jobname.toc
3806
\global\tocfileopenedtrue
3808
\iflinks \write\tocfile{#1{\folio}}\fi
3811
\newskip\contentsrightmargin \contentsrightmargin=1in
3812
\newcount\savepageno
3813
\newcount\lastnegativepageno \lastnegativepageno = -1
3815
% Finish up the main text and prepare to read what we've written
3818
\def\startcontents#1{%
3819
% If @setchapternewpage on, and @headings double, the contents should
3820
% start on an odd page, unlike chapters. Thus, we maintain
3821
% \contentsalignmacro in parallel with \pagealignmacro.
3822
% From: Torbjorn Granlund <tege@matematik.su.se>
3824
\immediate\closeout\tocfile
3826
% Don't need to put `Contents' or `Short Contents' in the headline.
3827
% It is abundantly clear what they are.
3828
\unnumbchapmacro{#1}\def\thischapter{}%
3829
\savepageno = \pageno
3830
\begingroup % Set up to handle contents files properly.
3831
\catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11
3832
% We can't do this, because then an actual ^ in a section
3833
% title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97.
3834
%\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
3835
\raggedbottom % Worry more about breakpoints than the bottom.
3836
\advance\hsize by -\contentsrightmargin % Don't use the full line length.
3838
% Roman numerals for page numbers.
3839
\ifnum \pageno>0 \pageno = \lastnegativepageno \fi
3843
% Normal (long) toc.
3845
\startcontents{\putwordTOC}%
3846
\openin 1 \jobname.toc
3852
\contentsalignmacro % in case @setchapternewpage odd is in effect
3855
\lastnegativepageno = \pageno
3856
\pageno = \savepageno
3859
% And just the chapters.
3860
\def\summarycontents{%
3861
\startcontents{\putwordShortTOC}%
3863
\let\chapentry = \shortchapentry
3864
\let\unnumbchapentry = \shortunnumberedentry
3865
% We want a true roman here for the page numbers.
3867
\let\rm=\shortcontrm \let\bf=\shortcontbf \let\sl=\shortcontsl
3869
\hyphenpenalty = 10000
3870
\advance\baselineskip by 1pt % Open it up a little.
3871
\def\secentry ##1##2##3##4{}
3872
\def\unnumbsecentry ##1##2{}
3873
\def\subsecentry ##1##2##3##4##5{}
3874
\def\unnumbsubsecentry ##1##2{}
3875
\def\subsubsecentry ##1##2##3##4##5##6{}
3876
\def\unnumbsubsubsecentry ##1##2{}
3877
\openin 1 \jobname.toc
3883
\contentsalignmacro % in case @setchapternewpage odd is in effect
3885
\lastnegativepageno = \pageno
3886
\pageno = \savepageno
3888
\let\shortcontents = \summarycontents
3891
\pdfcatalog{/PageMode /UseOutlines}%
3894
% These macros generate individual entries in the table of contents.
3895
% The first argument is the chapter or section name.
3896
% The last argument is the page number.
3897
% The arguments in between are the chapter number, section number, ...
3899
% Chapter-level things, for both the long and short contents.
3900
\def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}}
3902
% See comments in \dochapentry re vbox and related settings
3903
\def\shortchapentry#1#2#3{%
3904
\tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#3\egroup}%
3907
% Typeset the label for a chapter or appendix for the short contents.
3908
% The arg is, e.g. `Appendix A' for an appendix, or `3' for a chapter.
3909
% We could simplify the code here by writing out an \appendixentry
3910
% command in the toc file for appendices, instead of using \chapentry
3911
% for both, but it doesn't seem worth it.
3913
\newdimen\shortappendixwidth
3915
\def\shortchaplabel#1{%
3916
% Compute width of word "Appendix", may change with language.
3917
\setbox0 = \hbox{\shortcontrm \putwordAppendix}%
3918
\shortappendixwidth = \wd0
3920
% We typeset #1 in a box of constant width, regardless of the text of
3921
% #1, so the chapter titles will come out aligned.
3922
\setbox0 = \hbox{#1}%
3923
\dimen0 = \ifdim\wd0 > \shortappendixwidth \shortappendixwidth \else 0pt \fi
3925
% This space should be plenty, since a single number is .5em, and the
3926
% widest letter (M) is 1em, at least in the Computer Modern fonts.
3927
% (This space doesn't include the extra space that gets added after
3928
% the label; that gets put in by \shortchapentry above.)
3929
\advance\dimen0 by 1.1em
3930
\hbox to \dimen0{#1\hfil}%
3933
\def\unnumbchapentry#1#2{\dochapentry{#1}{#2}}
3934
\def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno\bgroup#2\egroup}}
3937
\def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}}
3938
\def\unnumbsecentry#1#2{\dosecentry{#1}{#2}}
3941
\def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}}
3942
\def\unnumbsubsecentry#1#2{\dosubsecentry{#1}{#2}}
3944
% And subsubsections.
3945
\def\subsubsecentry#1#2#3#4#5#6{%
3946
\dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}}
3947
\def\unnumbsubsubsecentry#1#2{\dosubsubsecentry{#1}{#2}}
3949
% This parameter controls the indentation of the various levels.
3950
\newdimen\tocindent \tocindent = 3pc
3952
% Now for the actual typesetting. In all these, #1 is the text and #2 is the
3955
% If the toc has to be broken over pages, we want it to be at chapters
3956
% if at all possible; hence the \penalty.
3957
\def\dochapentry#1#2{%
3958
\penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
3961
\tocentry{#1}{\dopageno\bgroup#2\egroup}%
3963
\nobreak\vskip .25\baselineskip plus.1\baselineskip
3966
\def\dosecentry#1#2{\begingroup
3967
\secentryfonts \leftskip=\tocindent
3968
\tocentry{#1}{\dopageno\bgroup#2\egroup}%
3971
\def\dosubsecentry#1#2{\begingroup
3972
\subsecentryfonts \leftskip=2\tocindent
3973
\tocentry{#1}{\dopageno\bgroup#2\egroup}%
3976
\def\dosubsubsecentry#1#2{\begingroup
3977
\subsubsecentryfonts \leftskip=3\tocindent
3978
\tocentry{#1}{\dopageno\bgroup#2\egroup}%
3981
% Final typesetting of a toc entry; we use the same \entry macro as for
3982
% the index entries, but we want to suppress hyphenation here. (We
3983
% can't do that in the \entry macro, since index entries might consist
3984
% of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.)
3985
\def\tocentry#1#2{\begingroup
3986
\vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks
3987
% Do not use \turnoffactive in these arguments. Since the toc is
3988
% typeset in cmr, so characters such as _ would come out wrong; we
3989
% have to do the usual translation tricks.
3993
% Space between chapter (or whatever) number and the title.
3994
\def\labelspace{\hskip1em \relax}
3996
\def\dopageno#1{{\rm #1}}
3997
\def\doshortpageno#1{{\rm #1}}
3999
\def\chapentryfonts{\secfonts \rm}
4000
\def\secentryfonts{\textfonts}
4001
\let\subsecentryfonts = \textfonts
4002
\let\subsubsecentryfonts = \textfonts
4005
\message{environments,}
4006
% @foo ... @end foo.
4008
% Since these characters are used in examples, it should be an even number of
4009
% \tt widths. Each \tt character is 1en, so two makes it 1em.
4010
% Furthermore, these definitions must come after we define our fonts.
4011
\newbox\dblarrowbox \newbox\longdblarrowbox
4012
\newbox\pushcharbox \newbox\bullbox
4013
\newbox\equivbox \newbox\errorbox
4016
%\global\setbox\dblarrowbox = \hbox to 1em{\hfil$\Rightarrow$\hfil}
4017
%\global\setbox\longdblarrowbox = \hbox to 1em{\hfil$\mapsto$\hfil}
4018
%\global\setbox\pushcharbox = \hbox to 1em{\hfil$\dashv$\hfil}
4019
%\global\setbox\equivbox = \hbox to 1em{\hfil$\ptexequiv$\hfil}
4020
% Adapted from the manmac format (p.420 of TeXbook)
4021
%\global\setbox\bullbox = \hbox to 1em{\kern.15em\vrule height .75ex width .85ex
4025
% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
4027
\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
4028
\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
4029
\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
4030
\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
4032
% Adapted from the TeXbook's \boxit.
4033
{\tentt \global\dimen0 = 3em}% Width of the box.
4034
\dimen2 = .55pt % Thickness of rules
4035
% The text. (`r' is open on the right, `e' somewhat less so on the left.)
4036
\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
4038
\global\setbox\errorbox=\hbox to \dimen0{\hfil
4039
\hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
4040
\advance\hsize by -2\dimen2 % Rules.
4042
\hrule height\dimen2
4043
\hbox{\vrule width\dimen2 \kern3pt % Space to left of text.
4044
\vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
4045
\kern3pt\vrule width\dimen2}% Space to right.
4046
\hrule height\dimen2}
4049
% The @error{} command.
4050
\def\error{\leavevmode\lower.7ex\copy\errorbox}
4052
% @tex ... @end tex escapes into raw Tex temporarily.
4053
% One exception: @ is still an escape character, so that @end tex works.
4054
% But \@ or @@ will get a plain tex @ character.
4056
\def\tex{\begingroup
4057
\catcode `\\=0 \catcode `\{=1 \catcode `\}=2
4058
\catcode `\$=3 \catcode `\&=4 \catcode `\#=6
4059
\catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie
4061
\catcode 43=12 % plus
4070
\let\bullet=\ptexbullet
4075
\let\equiv=\ptexequiv
4084
\def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
4085
\def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
4087
\let\Etex=\endgroup}
4089
% Define @lisp ... @endlisp.
4090
% @lisp does a \begingroup so it can rebind things,
4091
% including the definition of @endlisp (which normally is erroneous).
4093
% Amount to narrow the margins by for @lisp.
4094
\newskip\lispnarrowing \lispnarrowing=0.4in
4096
% This is the definition that ^^M gets inside @lisp, @example, and other
4097
% such environments. \null is better than a space, since it doesn't
4099
\def\lisppar{\null\endgraf}
4101
% Make each space character in the input produce a normal interword
4102
% space in the output. Don't allow a line break at this space, as this
4103
% is used only in environments like @example, where each line of input
4104
% should produce a line of output anyway.
4107
\gdef\sepspaces{\obeyspaces\let =\tie}}
4109
% Define \obeyedspace to be our active space, whatever it is. This is
4110
% for use in \parsearg.
4112
\global\let\obeyedspace= }
4114
% This space is always present above and below environments.
4115
\newskip\envskipamount \envskipamount = 0pt
4117
% Make spacing and below environment symmetrical. We use \parskip here
4118
% to help in doing that, since in @example-like environments \parskip
4119
% is reset to zero; thus the \afterenvbreak inserts no space -- but the
4120
% start of the next paragraph will insert \parskip
4122
\def\aboveenvbreak{{\advance\envskipamount by \parskip
4123
\endgraf \ifdim\lastskip<\envskipamount
4124
\removelastskip \penalty-50 \vskip\envskipamount \fi}}
4126
\let\afterenvbreak = \aboveenvbreak
4128
% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins.
4129
\let\nonarrowing=\relax
4131
% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
4132
% environment contents.
4133
\font\circle=lcircle10
4135
\newdimen\cartouter\newdimen\cartinner
4136
\newskip\normbskip\newskip\normpskip\newskip\normlskip
4137
\circthick=\fontdimen8\circle
4139
\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
4140
\def\ctr{{\hskip 6pt\circle\char'010}}
4141
\def\cbl{{\circle\char'012\hskip -6pt}}
4142
\def\cbr{{\hskip 6pt\circle\char'011}}
4143
\def\carttop{\hbox to \cartouter{\hskip\lskip
4144
\ctl\leaders\hrule height\circthick\hfil\ctr
4146
\def\cartbot{\hbox to \cartouter{\hskip\lskip
4147
\cbl\leaders\hrule height\circthick\hfil\cbr
4150
\newskip\lskip\newskip\rskip
4152
\long\def\cartouche{%
4154
\lskip=\leftskip \rskip=\rightskip
4155
\leftskip=0pt\rightskip=0pt %we want these *outside*.
4156
\cartinner=\hsize \advance\cartinner by-\lskip
4157
\advance\cartinner by-\rskip
4159
\advance\cartouter by 18.4pt % allow for 3pt kerns on either
4160
% side, and for 6pt waste from
4161
% each corner char, and rule thickness
4162
\normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
4163
% Flag to tell @lisp, etc., not to narrow margin.
4164
\let\nonarrowing=\comment
4166
\baselineskip=0pt\parskip=0pt\lineskip=0pt
4175
\baselineskip=\normbskip
4176
\lineskip=\normlskip
4192
% This macro is called at the beginning of all the @example variants,
4196
\inENV % This group ends at the end of the body
4197
\hfuzz = 12pt % Don't be fussy
4198
\sepspaces % Make spaces be word-separators rather than space tokens.
4200
\let\par = \lisppar % don't ignore blank lines
4201
\obeylines % each line of input is a line of output
4204
\emergencystretch = 0pt % don't try to avoid overfull boxes
4205
% @cartouche defines \nonarrowing to inhibit narrowing
4206
% at next level down.
4207
\ifx\nonarrowing\relax
4208
\advance \leftskip by \lispnarrowing
4209
\exdentamount=\lispnarrowing
4210
\let\exdent=\nofillexdent
4211
\let\nonarrowing=\relax
4215
% Define the \E... control sequence only if we are inside the particular
4216
% environment, so the error checking in \end will work.
4218
% To end an @example-like environment, we first end the paragraph (via
4219
% \afterenvbreak's vertical glue), and then the group. That way we keep
4220
% the zero \parskip that the environments set -- \parskip glue will be
4221
% inserted at the beginning of the next paragraph in the document, after
4224
\def\nonfillfinish{\afterenvbreak\endgroup}
4226
% @lisp: indented, narrowed, typewriter font.
4227
\def\lisp{\begingroup
4229
\let\Elisp = \nonfillfinish
4231
\let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
4232
\gobble % eat return
4235
% @example: Same as @lisp.
4236
\def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp}
4238
% @small... is usually equivalent to the non-small (@smallbook
4239
% redefines). We must call \example (or whatever) last in the
4240
% definition, since it reads the return following the @example (or
4241
% whatever) command.
4243
% This actually allows (for example) @end display inside an
4244
% @smalldisplay. Too bad, but makeinfo will catch the error anyway.
4246
\def\smalldisplay{\begingroup\def\Esmalldisplay{\nonfillfinish\endgroup}\display}
4247
\def\smallexample{\begingroup\def\Esmallexample{\nonfillfinish\endgroup}\lisp}
4248
\def\smallformat{\begingroup\def\Esmallformat{\nonfillfinish\endgroup}\format}
4249
\def\smalllisp{\begingroup\def\Esmalllisp{\nonfillfinish\endgroup}\lisp}
4251
% Real @smallexample and @smalllisp (when @smallbook): use smaller fonts.
4252
% Originally contributed by Pavel@xerox.
4253
\def\smalllispx{\begingroup
4254
\def\Esmalllisp{\nonfillfinish\endgroup}%
4255
\def\Esmallexample{\nonfillfinish\endgroup}%
4260
% @display: same as @lisp except keep current font.
4262
\def\display{\begingroup
4264
\let\Edisplay = \nonfillfinish
4268
% @smalldisplay (when @smallbook): @display plus smaller fonts.
4270
\def\smalldisplayx{\begingroup
4271
\def\Esmalldisplay{\nonfillfinish\endgroup}%
4276
% @format: same as @display except don't narrow margins.
4278
\def\format{\begingroup
4279
\let\nonarrowing = t
4281
\let\Eformat = \nonfillfinish
4285
% @smallformat (when @smallbook): @format plus smaller fonts.
4287
\def\smallformatx{\begingroup
4288
\def\Esmallformat{\nonfillfinish\endgroup}%
4293
% @flushleft (same as @format).
4295
\def\flushleft{\begingroup \def\Eflushleft{\nonfillfinish\endgroup}\format}
4299
\def\flushright{\begingroup
4300
\let\nonarrowing = t
4302
\let\Eflushright = \nonfillfinish
4303
\advance\leftskip by 0pt plus 1fill
4307
% @quotation does normal linebreaking (hence we can't use \nonfillstart)
4308
% and narrows the margins.
4311
\begingroup\inENV %This group ends at the end of the @quotation body
4312
{\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
4315
% We have retained a nonzero parskip for the environment, since we're
4316
% doing normal filling. So to avoid extra space below the environment...
4317
\def\Equotation{\parskip = 0pt \nonfillfinish}%
4319
% @cartouche defines \nonarrowing to inhibit narrowing at next level down.
4320
\ifx\nonarrowing\relax
4321
\advance\leftskip by \lispnarrowing
4322
\advance\rightskip by \lispnarrowing
4323
\exdentamount = \lispnarrowing
4324
\let\nonarrowing = \relax
4332
% Allow user to change definition object font (\df) internally
4333
\def\setdeffont #1 {\csname DEF#1\endcsname}
4335
\newskip\defbodyindent \defbodyindent=.4in
4336
\newskip\defargsindent \defargsindent=50pt
4337
\newskip\deftypemargin \deftypemargin=12pt
4338
\newskip\deflastargmargin \deflastargmargin=18pt
4340
\newcount\parencount
4341
% define \functionparens, which makes ( and ) and & do special things.
4342
% \functionparens affects the group it is contained in.
4344
\catcode`\(=\active \catcode`\)=\active \catcode`\&=\active
4345
\catcode`\[=\active \catcode`\]=\active}
4347
% Make control sequences which act like normal parenthesis chars.
4348
\let\lparen = ( \let\rparen = )
4350
{\activeparens % Now, smart parens don't turn on until &foo (see \amprm)
4352
% Be sure that we always have a definition for `(', etc. For example,
4353
% if the fn name has parens in it, \boldbrax will not be in effect yet,
4354
% so TeX would otherwise complain about undefined control sequence.
4355
\global\let(=\lparen \global\let)=\rparen
4356
\global\let[=\lbrack \global\let]=\rbrack
4358
\gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 }
4359
\gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
4360
% This is used to turn on special parens
4361
% but make & act ordinary (given that it's active).
4362
\gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr}
4364
% Definitions of (, ) and & used in args for functions.
4365
% This is the definition of ( outside of all parentheses.
4366
\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested
4367
\global\advance\parencount by 1
4370
% This is the definition of ( when already inside a level of parens.
4371
\gdef\opnested{\char`\(\global\advance\parencount by 1 }
4373
\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0.
4374
% also in that case restore the outer-level definition of (.
4375
\ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
4376
\global\advance \parencount by -1 }
4377
% If we encounter &foo, then turn on ()-hacking afterwards
4378
\gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ }
4380
\gdef\normalparens{\boldbrax\let&=\ampnr}
4381
} % End of definition inside \activeparens
4382
%% These parens (in \boldbrax) actually are a little bolder than the
4383
%% contained text. This is especially needed for [ and ]
4384
\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 }
4385
\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 }
4387
\def\lbrb{{\bf\char`\[}}
4388
\def\rbrb{{\bf\char`\]}}
4390
% Active &'s sneak into the index arguments, so make sure it's defined.
4393
\global\let& = \ampnr
4396
% First, defname, which formats the header line itself.
4397
% #1 should be the function name.
4398
% #2 should be the type of definition, such as "Function".
4401
% Get the values of \leftskip and \rightskip as they were
4402
% outside the @def...
4404
\advance\dimen2 by -\defbodyindent
4406
\setbox0=\hbox{\hskip \deflastargmargin{\rm #2}\hskip \deftypemargin}%
4407
\dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line
4408
\dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations
4409
\parshape 2 0in \dimen0 \defargsindent \dimen1
4410
% Now output arg 2 ("Function" or some such)
4411
% ending at \deftypemargin from the right margin,
4412
% but stuck inside a box of width 0 so it does not interfere with linebreaking
4413
{% Adjust \hsize to exclude the ambient margins,
4414
% so that \rightline will obey them.
4415
\advance \hsize by -\dimen2
4416
\rlap{\rightline{{\rm #2}\hskip -1.25pc }}}%
4417
% Make all lines underfull and no complaints:
4418
\tolerance=10000 \hbadness=10000
4419
\advance\leftskip by -\defbodyindent
4420
\exdentamount=\defbodyindent
4421
{\df #1}\enskip % Generate function name
4424
% Actually process the body of a definition
4425
% #1 should be the terminating control sequence, such as \Edefun.
4426
% #2 should be the "another name" control sequence, such as \defunx.
4427
% #3 should be the control sequence that actually processes the header,
4428
% such as \defunheader.
4430
\def\defparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody
4432
% Define the end token that this defining construct specifies
4433
% so that it will exit this group.
4434
\def#1{\endgraf\endgroup\medbreak}%
4435
\def#2{\begingroup\obeylines\activeparens\spacesplit#3}%
4437
\advance\leftskip by \defbodyindent
4438
\exdentamount=\defbodyindent
4440
\catcode 61=\active % 61 is `='
4441
\obeylines\activeparens\spacesplit#3}
4443
% #1 is the \E... control sequence to end the definition (which we define).
4444
% #2 is the \...x control sequence for consecutive fns (which we define).
4445
% #3 is the control sequence to call to resume processing.
4446
% #4, delimited by the space, is the class name.
4448
\def\defmethparsebody#1#2#3#4 {\begingroup\inENV %
4450
% Define the end token that this defining construct specifies
4451
% so that it will exit this group.
4452
\def#1{\endgraf\endgroup\medbreak}%
4453
\def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}%
4455
\advance\leftskip by \defbodyindent
4456
\exdentamount=\defbodyindent
4457
\begingroup\obeylines\activeparens\spacesplit{#3{#4}}}
4459
% Used for @deftypemethod and @deftypeivar.
4460
% #1 is the \E... control sequence to end the definition (which we define).
4461
% #2 is the \...x control sequence for consecutive fns (which we define).
4462
% #3 is the control sequence to call to resume processing.
4463
% #4, delimited by a space, is the class name.
4464
% #5 is the method's return type.
4466
\def\deftypemethparsebody#1#2#3#4 #5 {\begingroup\inENV
4468
\def#1{\endgraf\endgroup\medbreak}%
4469
\def#2##1 ##2 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}{##2}}}%
4471
\advance\leftskip by \defbodyindent
4472
\exdentamount=\defbodyindent
4473
\begingroup\obeylines\activeparens\spacesplit{#3{#4}{#5}}}
4475
% Used for @deftypeop. The change from \deftypemethparsebody is an
4476
% extra argument at the beginning which is the `category', instead of it
4477
% being the hardwired string `Method' or `Instance Variable'. We have
4478
% to account for this both in the \...x definition and in parsing the
4479
% input at hand. Thus also need a control sequence (passed as #5) for
4480
% the \E... definition to assign the category name to.
4482
\def\deftypeopparsebody#1#2#3#4#5 #6 {\begingroup\inENV
4484
\def#1{\endgraf\endgroup\medbreak}%
4485
\def#2##1 ##2 ##3 {%
4487
\begingroup\obeylines\activeparens\spacesplit{#3{##2}{##3}}}%
4489
\advance\leftskip by \defbodyindent
4490
\exdentamount=\defbodyindent
4491
\begingroup\obeylines\activeparens\spacesplit{#3{#5}{#6}}}
4493
\def\defopparsebody #1#2#3#4#5 {\begingroup\inENV %
4495
% Define the end token that this defining construct specifies
4496
% so that it will exit this group.
4497
\def#1{\endgraf\endgroup\medbreak}%
4498
\def#2##1 ##2 {\def#4{##1}%
4499
\begingroup\obeylines\activeparens\spacesplit{#3{##2}}}%
4501
\advance\leftskip by \defbodyindent
4502
\exdentamount=\defbodyindent
4503
\begingroup\obeylines\activeparens\spacesplit{#3{#5}}}
4505
% These parsing functions are similar to the preceding ones
4506
% except that they do not make parens into active characters.
4507
% These are used for "variables" since they have no arguments.
4509
\def\defvarparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody
4511
% Define the end token that this defining construct specifies
4512
% so that it will exit this group.
4513
\def#1{\endgraf\endgroup\medbreak}%
4514
\def#2{\begingroup\obeylines\spacesplit#3}%
4516
\advance\leftskip by \defbodyindent
4517
\exdentamount=\defbodyindent
4519
\catcode 61=\active %
4520
\obeylines\spacesplit#3}
4522
% This is used for \def{tp,vr}parsebody. It could probably be used for
4523
% some of the others, too, with some judicious conditionals.
4525
\def\parsebodycommon#1#2#3{%
4528
% Define the end token that this defining construct specifies
4529
% so that it will exit this group.
4530
\def#1{\endgraf\endgroup\medbreak}%
4531
\def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}%
4533
\advance\leftskip by \defbodyindent
4534
\exdentamount=\defbodyindent
4535
\begingroup\obeylines
4538
\def\defvrparsebody#1#2#3#4 {%
4539
\parsebodycommon{#1}{#2}{#3}%
4540
\spacesplit{#3{#4}}%
4543
% This loses on `@deftp {Data Type} {struct termios}' -- it thinks the
4544
% type is just `struct', because we lose the braces in `{struct
4545
% termios}' when \spacesplit reads its undelimited argument. Sigh.
4546
% \let\deftpparsebody=\defvrparsebody
4548
% So, to get around this, we put \empty in with the type name. That
4549
% way, TeX won't find exactly `{...}' as an undelimited argument, and
4550
% won't strip off the braces.
4552
\def\deftpparsebody #1#2#3#4 {%
4553
\parsebodycommon{#1}{#2}{#3}%
4554
\spacesplit{\parsetpheaderline{#3{#4}}}\empty
4557
% Fine, but then we have to eventually remove the \empty *and* the
4558
% braces (if any). That's what this does.
4560
\def\removeemptybraces\empty#1\relax{#1}
4562
% After \spacesplit has done its work, this is called -- #1 is the final
4563
% thing to call, #2 the type name (which starts with \empty), and #3
4564
% (which might be empty) the arguments.
4566
\def\parsetpheaderline#1#2#3{%
4567
#1{\removeemptybraces#2\relax}{#3}%
4570
\def\defopvarparsebody #1#2#3#4#5 {\begingroup\inENV %
4572
% Define the end token that this defining construct specifies
4573
% so that it will exit this group.
4574
\def#1{\endgraf\endgroup\medbreak}%
4575
\def#2##1 ##2 {\def#4{##1}%
4576
\begingroup\obeylines\spacesplit{#3{##2}}}%
4578
\advance\leftskip by \defbodyindent
4579
\exdentamount=\defbodyindent
4580
\begingroup\obeylines\spacesplit{#3{#5}}}
4582
% Split up #2 at the first space token.
4583
% call #1 with two arguments:
4584
% the first is all of #2 before the space token,
4585
% the second is all of #2 after that space token.
4586
% If #2 contains no space token, all of it is passed as the first arg
4587
% and the second is passed as empty.
4590
\gdef\spacesplit#1#2^^M{\endgroup\spacesplitfoo{#1}#2 \relax\spacesplitfoo}%
4591
\long\gdef\spacesplitfoo#1#2 #3#4\spacesplitfoo{%
4593
#1{#2}{}\else #1{#2}{#3#4}\fi}}
4595
% So much for the things common to all kinds of definitions.
4599
% First, define the processing that is wanted for arguments of \defun
4600
% Use this to expand the args and terminate the paragraph they make up
4602
\def\defunargs#1{\functionparens \sl
4603
% Expand, preventing hyphenation at `-' chars.
4604
% Note that groups don't affect changes in \hyphenchar.
4605
% Set the font temporarily and use \font in case \setfont made \tensl a macro.
4606
{\tensl\hyphenchar\font=0}%
4608
{\tensl\hyphenchar\font=45}%
4609
\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi%
4610
\interlinepenalty=10000
4611
\advance\rightskip by 0pt plus 1fil
4612
\endgraf\nobreak\vskip -\parskip\nobreak
4615
\def\deftypefunargs #1{%
4616
% Expand, preventing hyphenation at `-' chars.
4617
% Note that groups don't affect changes in \hyphenchar.
4618
% Use \boldbraxnoamp, not \functionparens, so that & is not special.
4620
\tclose{#1}% avoid \code because of side effects on active chars
4621
\interlinepenalty=10000
4622
\advance\rightskip by 0pt plus 1fil
4623
\endgraf\nobreak\vskip -\parskip\nobreak
4626
% Do complete processing of one @defun or @defunx line already parsed.
4628
% @deffn Command forward-char nchars
4630
\def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader}
4632
\def\deffnheader #1#2#3{\doind {fn}{\code{#2}}%
4633
\begingroup\defname {#2}{#1}\defunargs{#3}\endgroup %
4634
\catcode 61=\other % Turn off change made in \defparsebody
4637
% @defun == @deffn Function
4639
\def\defun{\defparsebody\Edefun\defunx\defunheader}
4641
\def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
4642
\begingroup\defname {#1}{\putwordDeffunc}%
4643
\defunargs {#2}\endgroup %
4644
\catcode 61=\other % Turn off change made in \defparsebody
4647
% @deftypefun int foobar (int @var{foo}, float @var{bar})
4649
\def\deftypefun{\defparsebody\Edeftypefun\deftypefunx\deftypefunheader}
4651
% #1 is the data type. #2 is the name and args.
4652
\def\deftypefunheader #1#2{\deftypefunheaderx{#1}#2 \relax}
4653
% #1 is the data type, #2 the name, #3 the args.
4654
\def\deftypefunheaderx #1#2 #3\relax{%
4655
\doind {fn}{\code{#2}}% Make entry in function index
4656
\begingroup\defname {\defheaderxcond#1\relax$$$#2}{\putwordDeftypefun}%
4657
\deftypefunargs {#3}\endgroup %
4658
\catcode 61=\other % Turn off change made in \defparsebody
4661
% @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar})
4663
\def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader}
4665
% \defheaderxcond#1\relax$$$
4666
% puts #1 in @code, followed by a space, but does nothing if #1 is null.
4667
\def\defheaderxcond#1#2$$${\ifx#1\relax\else\code{#1#2} \fi}
4669
% #1 is the classification. #2 is the data type. #3 is the name and args.
4670
\def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax}
4671
% #1 is the classification, #2 the data type, #3 the name, #4 the args.
4672
\def\deftypefnheaderx #1#2#3 #4\relax{%
4673
\doind {fn}{\code{#3}}% Make entry in function index
4675
\normalparens % notably, turn off `&' magic, which prevents
4676
% at least some C++ text from working
4677
\defname {\defheaderxcond#2\relax$$$#3}{#1}%
4678
\deftypefunargs {#4}\endgroup %
4679
\catcode 61=\other % Turn off change made in \defparsebody
4682
% @defmac == @deffn Macro
4684
\def\defmac{\defparsebody\Edefmac\defmacx\defmacheader}
4686
\def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
4687
\begingroup\defname {#1}{\putwordDefmac}%
4688
\defunargs {#2}\endgroup %
4689
\catcode 61=\other % Turn off change made in \defparsebody
4692
% @defspec == @deffn Special Form
4694
\def\defspec{\defparsebody\Edefspec\defspecx\defspecheader}
4696
\def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
4697
\begingroup\defname {#1}{\putwordDefspec}%
4698
\defunargs {#2}\endgroup %
4699
\catcode 61=\other % Turn off change made in \defparsebody
4702
% @defop CATEGORY CLASS OPERATION ARG...
4704
\def\defop #1 {\def\defoptype{#1}%
4705
\defopparsebody\Edefop\defopx\defopheader\defoptype}
4707
\def\defopheader#1#2#3{%
4708
\dosubind {fn}{\code{#2}}{\putwordon\ #1}% Make entry in function index
4709
\begingroup\defname {#2}{\defoptype\ \putwordon\ #1}%
4710
\defunargs {#3}\endgroup %
4713
% @deftypeop CATEGORY CLASS TYPE OPERATION ARG...
4715
\def\deftypeop #1 {\def\deftypeopcategory{#1}%
4716
\deftypeopparsebody\Edeftypeop\deftypeopx\deftypeopheader
4719
% #1 is the class name, #2 the data type, #3 the operation name, #4 the args.
4720
\def\deftypeopheader#1#2#3#4{%
4721
\dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
4723
\defname{\defheaderxcond#2\relax$$$#3}
4724
{\deftypeopcategory\ \putwordon\ \code{#1}}%
4725
\deftypefunargs{#4}%
4729
% @deftypemethod CLASS TYPE METHOD ARG...
4731
\def\deftypemethod{%
4732
\deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
4734
% #1 is the class name, #2 the data type, #3 the method name, #4 the args.
4735
\def\deftypemethodheader#1#2#3#4{%
4736
\dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
4738
\defname{\defheaderxcond#2\relax$$$#3}{\putwordMethodon\ \code{#1}}%
4739
\deftypefunargs{#4}%
4743
% @deftypeivar CLASS TYPE VARNAME
4746
\deftypemethparsebody\Edeftypeivar\deftypeivarx\deftypeivarheader}
4748
% #1 is the class name, #2 the data type, #3 the variable name.
4749
\def\deftypeivarheader#1#2#3{%
4750
\dosubind{vr}{\code{#3}}{\putwordof\ \code{#1}}% entry in variable index
4752
\defname{\defheaderxcond#2\relax$$$#3}
4753
{\putwordInstanceVariableof\ \code{#1}}%
4758
% @defmethod == @defop Method
4760
\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
4762
% #1 is the class name, #2 the method name, #3 the args.
4763
\def\defmethodheader#1#2#3{%
4764
\dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% entry in function index
4766
\defname{#2}{\putwordMethodon\ \code{#1}}%
4771
% @defcv {Class Option} foo-class foo-flag
4773
\def\defcv #1 {\def\defcvtype{#1}%
4774
\defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype}
4776
\def\defcvarheader #1#2#3{%
4777
\dosubind {vr}{\code{#2}}{\putwordof\ #1}% Make entry in var index
4778
\begingroup\defname {#2}{\defcvtype\ \putwordof\ #1}%
4779
\defvarargs {#3}\endgroup %
4782
% @defivar CLASS VARNAME == @defcv {Instance Variable} CLASS VARNAME
4784
\def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader}
4786
\def\defivarheader#1#2#3{%
4787
\dosubind {vr}{\code{#2}}{\putwordof\ #1}% entry in var index
4789
\defname{#2}{\putwordInstanceVariableof\ #1}%
4795
% First, define the processing that is wanted for arguments of @defvar.
4796
% This is actually simple: just print them in roman.
4797
% This must expand the args and terminate the paragraph they make up
4798
\def\defvarargs #1{\normalparens #1%
4799
\interlinepenalty=10000
4800
\endgraf\nobreak\vskip -\parskip\nobreak}
4802
% @defvr Counter foo-count
4804
\def\defvr{\defvrparsebody\Edefvr\defvrx\defvrheader}
4806
\def\defvrheader #1#2#3{\doind {vr}{\code{#2}}%
4807
\begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup}
4809
% @defvar == @defvr Variable
4811
\def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader}
4813
\def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
4814
\begingroup\defname {#1}{\putwordDefvar}%
4815
\defvarargs {#2}\endgroup %
4818
% @defopt == @defvr {User Option}
4820
\def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader}
4822
\def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
4823
\begingroup\defname {#1}{\putwordDefopt}%
4824
\defvarargs {#2}\endgroup %
4827
% @deftypevar int foobar
4829
\def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader}
4831
% #1 is the data type. #2 is the name, perhaps followed by text that
4832
% is actually part of the data type, which should not be put into the index.
4833
\def\deftypevarheader #1#2{%
4834
\dovarind#2 \relax% Make entry in variables index
4835
\begingroup\defname {\defheaderxcond#1\relax$$$#2}{\putwordDeftypevar}%
4836
\interlinepenalty=10000
4837
\endgraf\nobreak\vskip -\parskip\nobreak
4839
\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}}
4841
% @deftypevr {Global Flag} int enable
4843
\def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader}
4845
\def\deftypevrheader #1#2#3{\dovarind#3 \relax%
4846
\begingroup\defname {\defheaderxcond#2\relax$$$#3}{#1}
4847
\interlinepenalty=10000
4848
\endgraf\nobreak\vskip -\parskip\nobreak
4852
% Args are printed in bold, a slight difference from @defvar.
4854
\def\deftpargs #1{\bf \defvarargs{#1}}
4856
% @deftp Class window height width ...
4858
\def\deftp{\deftpparsebody\Edeftp\deftpx\deftpheader}
4860
\def\deftpheader #1#2#3{\doind {tp}{\code{#2}}%
4861
\begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup}
4863
% These definitions are used if you use @defunx (etc.)
4864
% anywhere other than immediately after a @defun or @defunx.
4866
\def\defcvx#1 {\errmessage{@defcvx in invalid context}}
4867
\def\deffnx#1 {\errmessage{@deffnx in invalid context}}
4868
\def\defivarx#1 {\errmessage{@defivarx in invalid context}}
4869
\def\defmacx#1 {\errmessage{@defmacx in invalid context}}
4870
\def\defmethodx#1 {\errmessage{@defmethodx in invalid context}}
4871
\def\defoptx #1 {\errmessage{@defoptx in invalid context}}
4872
\def\defopx#1 {\errmessage{@defopx in invalid context}}
4873
\def\defspecx#1 {\errmessage{@defspecx in invalid context}}
4874
\def\deftpx#1 {\errmessage{@deftpx in invalid context}}
4875
\def\deftypefnx#1 {\errmessage{@deftypefnx in invalid context}}
4876
\def\deftypefunx#1 {\errmessage{@deftypefunx in invalid context}}
4877
\def\deftypeivarx#1 {\errmessage{@deftypeivarx in invalid context}}
4878
\def\deftypemethodx#1 {\errmessage{@deftypemethodx in invalid context}}
4879
\def\deftypeopx#1 {\errmessage{@deftypeopx in invalid context}}
4880
\def\deftypevarx#1 {\errmessage{@deftypevarx in invalid context}}
4881
\def\deftypevrx#1 {\errmessage{@deftypevrx in invalid context}}
4882
\def\defunx#1 {\errmessage{@defunx in invalid context}}
4883
\def\defvarx#1 {\errmessage{@defvarx in invalid context}}
4884
\def\defvrx#1 {\errmessage{@defvrx in invalid context}}
4890
% To do this right we need a feature of e-TeX, \scantokens,
4891
% which we arrange to emulate with a temporary file in ordinary TeX.
4892
\ifx\eTeXversion\undefined
4893
\newwrite\macscribble
4895
\begingroup \newlinechar`\^^M
4896
% Undo catcode changes of \startcontents and \doprintindex
4897
\catcode`\@=0 \catcode`\\=12 \escapechar=`\@
4898
% Append \endinput to make sure that TeX does not see the ending newline.
4899
\toks0={#1\endinput}%
4900
\immediate\openout\macscribble=\jobname.tmp
4901
\immediate\write\macscribble{\the\toks0}%
4902
\immediate\closeout\macscribble
4903
\let\xeatspaces\eatspaces
4909
\begingroup \newlinechar`\^^M
4910
% Undo catcode changes of \startcontents and \doprintindex
4911
\catcode`\@=0 \catcode`\\=12 \escapechar=`\@
4912
\let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup}
4915
\newcount\paramno % Count of parameters
4916
\newtoks\macname % Macro name
4917
\newif\ifrecursive % Is it recursive?
4918
\def\macrolist{} % List of all defined macros in the form
4919
% \do\macro1\do\macro2...
4922
% Thisdoes \let #1 = #2, except with \csnames.
4924
\expandafter\expandafter
4926
\expandafter\expandafter
4928
\csname#2\endcsname}
4930
% Trim leading and trailing spaces off a string.
4931
% Concepts from aro-bend problem 15 (see CTAN).
4933
\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
4934
\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
4935
\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
4937
\unbrace{\gdef\trim@@@ #1 } #2@{#1}
4940
% Trim a single trailing ^^M off a string.
4941
{\catcode`\^^M=12\catcode`\Q=3%
4942
\gdef\eatcr #1{\eatcra #1Q^^MQ}%
4943
\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
4944
\gdef\eatcrb#1Q#2Q{#1}%
4947
% Macro bodies are absorbed as an argument in a context where
4948
% all characters are catcode 10, 11 or 12, except \ which is active
4949
% (as in normal texinfo). It is necessary to change the definition of \.
4951
% It's necessary to have hard CRs when the macro is executed. This is
4952
% done by making ^^M (\endlinechar) catcode 12 when reading the macro
4953
% body, and then making it the \newlinechar in \scanmacro.
4955
\def\macrobodyctxt{%
4980
% \mbodybackslash is the definition of \ in @macro bodies.
4981
% It maps \foo\ => \csname macarg.foo\endcsname => #N
4982
% where N is the macro parameter number.
4983
% We define \csname macarg.\endcsname to be \realbackslash, so
4984
% \\ in macro replacement text gets you a backslash.
4986
{\catcode`@=0 @catcode`@\=@active
4987
@gdef@usembodybackslash{@let\=@mbodybackslash}
4988
@gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
4990
\expandafter\def\csname macarg.\endcsname{\realbackslash}
4992
\def\macro{\recursivefalse\parsearg\macroxxx}
4993
\def\rmacro{\recursivetrue\parsearg\macroxxx}
4996
\getargs{#1}% now \macname is the macname and \argl the arglist
4997
\ifx\argl\empty % no arguments
5000
\expandafter\parsemargdef \argl;%
5002
\if1\csname ismacro.\the\macname\endcsname
5003
\message{Warning: redefining \the\macname}%
5005
\expandafter\ifx\csname \the\macname\endcsname \relax
5006
\else \errmessage{The name \the\macname\space is reserved}\fi
5007
\global\cslet{macsave.\the\macname}{\the\macname}%
5008
\global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
5009
% Add the macroname to \macrolist
5010
\toks0 = \expandafter{\macrolist\do}%
5011
\xdef\macrolist{\the\toks0
5012
\expandafter\noexpand\csname\the\macname\endcsname}%
5014
\begingroup \macrobodyctxt
5015
\ifrecursive \expandafter\parsermacbody
5016
\else \expandafter\parsemacbody
5019
\def\unmacro{\parsearg\unmacroxxx}
5021
\if1\csname ismacro.#1\endcsname
5022
\global\cslet{#1}{macsave.#1}%
5023
\global\expandafter\let \csname ismacro.#1\endcsname=0%
5024
% Remove the macro name from \macrolist
5026
\edef\tempa{\expandafter\noexpand\csname#1\endcsname}%
5032
\toks0 = \expandafter{\newmacrolist\do}%
5033
\edef\newmacrolist{\the\toks0\expandafter\noexpand\tempa}%
5035
\def\newmacrolist{}%
5036
% Execute macro list to define \newmacrolist
5038
\global\let\macrolist\newmacrolist
5041
\errmessage{Macro #1 not defined}%
5045
% This makes use of the obscure feature that if the last token of a
5046
% <parameter list> is #, then the preceding argument is delimited by
5047
% an opening brace, and that opening brace is not consumed.
5048
\def\getargs#1{\getargsxxx#1{}}
5049
\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
5050
\def\getmacname #1 #2\relax{\macname={#1}}
5051
\def\getmacargs#1{\def\argl{#1}}
5053
% Parse the optional {params} list. Set up \paramno and \paramlist
5054
% so \defmacro knows what to do. Define \macarg.blah for each blah
5055
% in the params list, to be ##N where N is the position in that list.
5056
% That gets used by \mbodybackslash (above).
5058
% We need to get `macro parameter char #' into several definitions.
5059
% The technique used is stolen from LaTeX: let \hash be something
5060
% unexpandable, insert that wherever you need a #, and then redefine
5061
% it to # just before using the token list produced.
5063
% The same technique is used to protect \eatspaces till just before
5064
% the macro is used.
5066
\def\parsemargdef#1;{\paramno=0\def\paramlist{}%
5067
\let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,}
5068
\def\parsemargdefxxx#1,{%
5069
\if#1;\let\next=\relax
5070
\else \let\next=\parsemargdefxxx
5071
\advance\paramno by 1%
5072
\expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
5073
{\xeatspaces{\hash\the\paramno}}%
5074
\edef\paramlist{\paramlist\hash\the\paramno,}%
5077
% These two commands read recursive and nonrecursive macro bodies.
5078
% (They're different since rec and nonrec macros end differently.)
5080
\long\def\parsemacbody#1@end macro%
5081
{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
5082
\long\def\parsermacbody#1@end rmacro%
5083
{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
5085
% This defines the macro itself. There are six cases: recursive and
5086
% nonrecursive macros of zero, one, and many arguments.
5087
% Much magic with \expandafter here.
5088
% \xdef is used so that macro definitions will survive the file
5089
% they're defined in; @include reads the file inside a group.
5091
\let\hash=##% convert placeholders to macro parameter chars
5095
\expandafter\xdef\csname\the\macname\endcsname{%
5096
\noexpand\scanmacro{\temp}}%
5098
\expandafter\xdef\csname\the\macname\endcsname{%
5099
\bgroup\noexpand\macroargctxt
5100
\noexpand\braceorline
5101
\expandafter\noexpand\csname\the\macname xxx\endcsname}%
5102
\expandafter\xdef\csname\the\macname xxx\endcsname##1{%
5103
\egroup\noexpand\scanmacro{\temp}}%
5105
\expandafter\xdef\csname\the\macname\endcsname{%
5106
\bgroup\noexpand\macroargctxt
5107
\noexpand\csname\the\macname xx\endcsname}%
5108
\expandafter\xdef\csname\the\macname xx\endcsname##1{%
5109
\expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
5110
\expandafter\expandafter
5112
\expandafter\expandafter
5113
\csname\the\macname xxx\endcsname
5114
\paramlist{\egroup\noexpand\scanmacro{\temp}}%
5119
\expandafter\xdef\csname\the\macname\endcsname{%
5120
\noexpand\norecurse{\the\macname}%
5121
\noexpand\scanmacro{\temp}\egroup}%
5123
\expandafter\xdef\csname\the\macname\endcsname{%
5124
\bgroup\noexpand\macroargctxt
5125
\noexpand\braceorline
5126
\expandafter\noexpand\csname\the\macname xxx\endcsname}%
5127
\expandafter\xdef\csname\the\macname xxx\endcsname##1{%
5129
\noexpand\norecurse{\the\macname}%
5130
\noexpand\scanmacro{\temp}\egroup}%
5132
\expandafter\xdef\csname\the\macname\endcsname{%
5133
\bgroup\noexpand\macroargctxt
5134
\expandafter\noexpand\csname\the\macname xx\endcsname}%
5135
\expandafter\xdef\csname\the\macname xx\endcsname##1{%
5136
\expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
5137
\expandafter\expandafter
5139
\expandafter\expandafter
5140
\csname\the\macname xxx\endcsname
5143
\noexpand\norecurse{\the\macname}%
5144
\noexpand\scanmacro{\temp}\egroup}%
5148
\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
5150
% \braceorline decides whether the next nonwhitespace character is a
5151
% {. If so it reads up to the closing }, if not, it reads the whole
5152
% line. Whatever was read is then fed to the next control sequence
5153
% as an argument (by \parsebrace or \parsearg)
5154
\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
5155
\def\braceorlinexxx{%
5156
\ifx\nchar\bgroup\else
5157
\expandafter\parsearg
5160
% We mant to disable all macros during \shipout so that they are not
5161
% expanded by \write.
5162
\def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}%
5163
\edef\next{\macrolist}\expandafter\endgroup\next}
5167
% We need some trickery to remove the optional spaces around the equal
5168
% sign. Just make them active and then expand them all to nothing.
5169
\def\alias{\begingroup\obeyspaces\parsearg\aliasxxx}
5170
\def\aliasxxx #1{\aliasyyy#1\relax}
5171
\def\aliasyyy #1=#2\relax{\ignoreactivespaces
5172
\edef\next{\global\let\expandafter\noexpand\csname#1\endcsname=%
5173
\expandafter\noexpand\csname#2\endcsname}%
5174
\expandafter\endgroup\next}
5177
\message{cross references,}
5182
\newif\ifhavexrefs % True if xref values are known.
5183
\newif\ifwarnedxrefs % True if we warned once that they aren't known.
5185
% @inforef is relatively simple.
5186
\def\inforef #1{\inforefzzz #1,,,,**}
5187
\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
5188
node \samp{\ignorespaces#1{}}}
5190
% @node's job is to define \lastnode.
5191
\def\node{\ENVcheck\parsearg\nodezzz}
5192
\def\nodezzz#1{\nodexxx [#1,]}
5193
\def\nodexxx[#1,#2]{\gdef\lastnode{#1}}
5195
\let\lastnode=\relax
5197
% The sectioning commands (@chapter, etc.) call these.
5199
\ifx\lastnode\relax\else
5200
\expandafter\expandafter\expandafter\setref{\lastnode}%
5201
{Ysectionnumberandtype}%
5202
\global\let\lastnode=\relax
5205
\def\unnumbnoderef{%
5206
\ifx\lastnode\relax\else
5207
\expandafter\expandafter\expandafter\setref{\lastnode}{Ynothing}%
5208
\global\let\lastnode=\relax
5211
\def\appendixnoderef{%
5212
\ifx\lastnode\relax\else
5213
\expandafter\expandafter\expandafter\setref{\lastnode}%
5214
{Yappendixletterandtype}%
5215
\global\let\lastnode=\relax
5220
% @anchor{NAME} -- define xref target at arbitrary point.
5222
\newcount\savesfregister
5223
\gdef\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
5224
\gdef\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
5225
\gdef\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
5227
% \setref{NAME}{SNT} defines a cross-reference point NAME, namely
5228
% NAME-title, NAME-pg, and NAME-SNT. Called from \foonoderef. We have
5229
% to set \indexdummies so commands such as @code in a section title
5230
% aren't expanded. It would be nicer not to expand the titles in the
5231
% first place, but there's so many layers that that is hard to do.
5236
\dosetq{#1-title}{Ytitle}%
5237
\dosetq{#1-pg}{Ypagenumber}%
5238
\dosetq{#1-snt}{#2}%
5241
% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
5242
% the node name, #2 the name of the Info cross-reference, #3 the printed
5243
% node name, #4 the name of the Info file, #5 the name of the printed
5244
% manual. All but the node name can be omitted.
5246
\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
5247
\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
5248
\def\ref#1{\xrefX[#1,,,,,,,]}
5249
\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
5251
\def\printedmanual{\ignorespaces #5}%
5252
\def\printednodename{\ignorespaces #3}%
5253
\setbox1=\hbox{\printedmanual}%
5254
\setbox0=\hbox{\printednodename}%
5256
% No printed node name was explicitly given.
5257
\expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
5258
% Use the node name inside the square brackets.
5259
\def\printednodename{\ignorespaces #1}%
5261
% Use the actual chapter/section title appear inside
5262
% the square brackets. Use the real section title if we have it.
5264
% It is in another manual, so we don't have it.
5265
\def\printednodename{\ignorespaces #1}%
5268
% We know the real title if we have the xref values.
5269
\def\printednodename{\refx{#1-title}{}}%
5271
% Otherwise just copy the Info node name.
5272
\def\printednodename{\ignorespaces #1}%
5278
% If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
5279
% insert empty discretionaries after hyphens, which means that it will
5280
% not find a line break at a hyphen in a node names. Since some manuals
5281
% are best written with fairly long node names, containing hyphens, this
5282
% is a loss. Therefore, we give the text of the node name again, so it
5283
% is as if TeX is seeing it for the first time.
5287
\ifnum\filenamelength>0
5288
\startlink attr{/Border [0 0 0]}%
5289
goto file{\the\filename.pdf} name{#1@}%
5291
\startlink attr{/Border [0 0 0]}%
5298
\putwordsection{} ``\printednodename'' \putwordin{} \cite{\printedmanual}%
5300
% _ (for example) has to be the character _ for the purposes of the
5301
% control sequence corresponding to the node, but it has to expand
5302
% into the usual \leavevmode...\vrule stuff for purposes of
5303
% printing. So we \turnoffactive for the \refx-snt, back on for the
5304
% printing, back off for the \refx-pg.
5305
{\normalturnoffactive
5306
% Only output a following space if the -snt ref is nonempty; for
5307
% @unnumbered and @anchor, it won't be.
5308
\setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
5309
\ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
5312
[\printednodename],\space
5314
\turnoffactive \putwordpage\tie\refx{#1-pg}{}%
5319
% \dosetq is the interface for calls from other macros
5321
% Use \normalturnoffactive so that punctuation chars such as underscore
5322
% and backslash work in node names. (\turnoffactive doesn't do \.)
5325
\normalturnoffactive
5326
\edef\next{\write\auxfile{\internalsetq{#1}{#2}}}%
5333
% \internalsetq {foo}{page} expands into
5334
% CHARACTERS 'xrdef {foo}{...expansion of \Ypage...}
5335
% When the aux file is read, ' is the escape character
5337
\def\internalsetq #1#2{'xrdef {#1}{\csname #2\endcsname}}
5339
% Things to be expanded by \internalsetq
5341
\def\Ypagenumber{\folio}
5343
\def\Ytitle{\thissection}
5347
\def\Ysectionnumberandtype{%
5348
\ifnum\secno=0 \putwordChapter\xreftie\the\chapno %
5349
\else \ifnum \subsecno=0 \putwordSection\xreftie\the\chapno.\the\secno %
5350
\else \ifnum \subsubsecno=0 %
5351
\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno %
5353
\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno %
5356
\def\Yappendixletterandtype{%
5357
\ifnum\secno=0 \putwordAppendix\xreftie'char\the\appendixno{}%
5358
\else \ifnum \subsecno=0 \putwordSection\xreftie'char\the\appendixno.\the\secno %
5359
\else \ifnum \subsubsecno=0 %
5360
\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno %
5362
\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno %
5367
% Use TeX 3.0's \inputlineno to get the line number, for better error
5368
% messages, but if we're using an old version of TeX, don't do anything.
5370
\ifx\inputlineno\thisisundefined
5371
\let\linenumber = \empty % Non-3.0.
5373
\def\linenumber{\the\inputlineno:\space}
5376
% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
5377
% If its value is nonempty, SUFFIX is output afterward.
5380
\expandafter\ifx\csname X#1\endcsname\relax
5381
% If not defined, say something at least.
5382
\angleleft un\-de\-fined\angleright
5385
\message{\linenumber Undefined cross reference `#1'.}%
5388
\global\warnedxrefstrue
5389
\message{Cross reference values unknown; you must run TeX again.}%
5394
% It's defined, so just use it.
5395
\csname X#1\endcsname
5397
#2% Output the suffix in any case.
5400
% This is the macro invoked by entries in the aux file.
5402
\def\xrdef#1{\begingroup
5403
% Reenable \ as an escape while reading the second argument.
5405
\afterassignment\endgroup
5406
\expandafter\gdef\csname X#1\endcsname
5409
% Read the last existing aux file, if any. No error if none exists.
5410
\def\readauxfile{\begingroup
5411
\catcode`\^^@=\other
5412
\catcode`\^^A=\other
5413
\catcode`\^^B=\other
5414
\catcode`\^^C=\other
5415
\catcode`\^^D=\other
5416
\catcode`\^^E=\other
5417
\catcode`\^^F=\other
5418
\catcode`\^^G=\other
5419
\catcode`\^^H=\other
5420
\catcode`\^^K=\other
5421
\catcode`\^^L=\other
5422
\catcode`\^^N=\other
5423
\catcode`\^^P=\other
5424
\catcode`\^^Q=\other
5425
\catcode`\^^R=\other
5426
\catcode`\^^S=\other
5427
\catcode`\^^T=\other
5428
\catcode`\^^U=\other
5429
\catcode`\^^V=\other
5430
\catcode`\^^W=\other
5431
\catcode`\^^X=\other
5432
\catcode`\^^Z=\other
5433
\catcode`\^^[=\other
5434
\catcode`\^^\=\other
5435
\catcode`\^^]=\other
5436
\catcode`\^^^=\other
5437
\catcode`\^^_=\other
5440
% It was suggested to define this as 7, which would allow ^^e4 etc.
5441
% in xref tags, i.e., node names. But since ^^e4 notation isn't
5442
% supported in the main text, it doesn't seem desirable. Furthermore,
5443
% that is not enough: for node names that actually contain a ^
5444
% character, we would end up writing a line like this: 'xrdef {'hat
5445
% b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
5446
% argument, and \hat is not an expandable control sequence. It could
5447
% all be worked out, but why? Either we support ^^ or we don't.
5449
% The other change necessary for this was to define \auxhat:
5450
% \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
5451
% and then to call \auxhat in \setq.
5464
\catcode`+=\other % avoid \+ for paranoia even though we've turned it off
5465
% Make the characters 128-255 be printing characters
5469
\catcode\count 1=\other
5470
\advance\count 1 by 1
5471
\ifnum \count 1<256 \loop \fi
5474
% The aux file uses ' as the escape (for now).
5475
% Turn off \ as an escape so we do not lose on
5476
% entries which were dumped with control sequences in their names.
5477
% For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^
5478
% Reference to such entries still does not work the way one would wish,
5479
% but at least they do not bomb out when the aux file is read in.
5486
\openin 1 \jobname.aux
5490
\global\havexrefstrue
5491
\global\warnedobstrue
5493
% Open the new aux file. TeX will close it automatically at exit.
5494
\openout\auxfile=\jobname.aux
5500
\newcount \footnoteno
5502
% The trailing space in the following definition for supereject is
5503
% vital for proper filling; pages come out unaligned when you do a
5504
% pagealignmacro call if that space before the closing brace is
5505
% removed. (Generally, numeric constants should always be followed by a
5506
% space to prevent strange expansion errors.)
5507
\def\supereject{\par\penalty -20000\footnoteno =0 }
5509
% @footnotestyle is meaningful for info output only.
5510
\let\footnotestyle=\comment
5512
\let\ptexfootnote=\footnote
5516
% Auto-number footnotes. Otherwise like plain.
5518
\global\advance\footnoteno by \@ne
5519
\edef\thisfootno{$^{\the\footnoteno}$}%
5521
% In case the footnote comes at the end of a sentence, preserve the
5522
% extra spacing after we do the footnote number.
5524
\ifhmode\edef\@sf{\spacefactor\the\spacefactor}\/\fi
5526
% Remove inadvertent blank space before typesetting the footnote number.
5532
% Don't bother with the trickery in plain.tex to not require the
5533
% footnote text as a parameter. Our footnotes don't need to be so general.
5535
% Oh yes, they do; otherwise, @ifset and anything else that uses
5536
% \parseargline fail inside footnotes because the tokens are fixed when
5537
% the footnote is read. --karl, 16nov96.
5539
\long\gdef\footnotezzz{\insert\footins\bgroup
5540
% We want to typeset this text as a normal paragraph, even if the
5541
% footnote reference occurs in (for example) a display environment.
5542
% So reset some parameters.
5543
\interlinepenalty\interfootnotelinepenalty
5544
\splittopskip\ht\strutbox % top baseline for broken footnotes
5545
\splitmaxdepth\dp\strutbox
5546
\floatingpenalty\@MM
5551
\parindent\defaultparindent
5555
% Hang the footnote text off the number.
5557
\textindent{\thisfootno}%
5559
% Don't crash into the line above the footnote text. Since this
5560
% expands into a box, it must come within the paragraph, lest it
5561
% provide a place where TeX can split the footnote.
5563
\futurelet\next\fo@t
5565
\def\fo@t{\ifcat\bgroup\noexpand\next \let\next\f@@t
5566
\else\let\next\f@t\fi \next}
5567
\def\f@@t{\bgroup\aftergroup\@foot\let\next}
5568
\def\f@t#1{#1\@foot}
5569
\def\@foot{\strut\par\egroup}
5571
}%end \catcode `\@=11
5573
% Set the baselineskip to #1, and the lineskip and strut size
5574
% correspondingly. There is no deep meaning behind these magic numbers
5575
% used as factors; they just match (closely enough) what Knuth defined.
5577
\def\lineskipfactor{.08333}
5578
\def\strutheightpercent{.70833}
5579
\def\strutdepthpercent {.29167}
5582
\normalbaselineskip = #1\relax
5583
\normallineskip = \lineskipfactor\normalbaselineskip
5585
\setbox\strutbox =\hbox{%
5586
\vrule width0pt height\strutheightpercent\baselineskip
5587
depth \strutdepthpercent \baselineskip
5591
% @| inserts a changebar to the left of the current line. It should
5592
% surround any changed text. This approach does *not* work if the
5593
% change spans more than two lines of output. To handle that, we would
5594
% have adopt a much more difficult approach (putting marks into the main
5595
% vertical list for the beginning and end of each change).
5598
% \vadjust can only be used in horizontal mode.
5601
% Append this vertical mode material after the current line in the output.
5603
% We want to insert a rule with the height and depth of the current
5604
% leading; that is exactly what \strutbox is supposed to record.
5605
\vskip-\baselineskip
5607
% \vadjust-items are inserted at the left edge of the type. So
5608
% the \llap here moves out into the left-hand margin.
5611
% For a thicker or thinner bar, change the `1pt'.
5612
\vrule height\baselineskip width1pt
5614
% This is the space between the bar and the text.
5620
% For a final copy, take out the rectangles
5621
% that mark overfull boxes (in case you have decided
5622
% that the text looks ok even though it passes the margin).
5624
\def\finalout{\overfullrule=0pt}
5626
% @image. We use the macros from epsf.tex to support this.
5627
% If epsf.tex is not installed and @image is used, we complain.
5629
% Check for and read epsf.tex up front. If we read it only at @image
5630
% time, we might be inside a group, and then its definitions would get
5631
% undone and the next image would fail.
5632
\openin 1 = epsf.tex
5635
% Do not bother showing banner with post-v2.7 epsf.tex (available in
5636
% doc/epsf.tex until it shows up on ctan).
5637
\def\epsfannounce{\toks0 = }%
5641
% We will only complain once about lack of epsf.tex.
5642
\newif\ifwarnednoepsf
5643
\newhelp\noepsfhelp{epsf.tex must be installed for images to
5644
work. It is also included in the Texinfo distribution, or you can get
5645
it from ftp://tug.org/tex/epsf.tex.}
5648
\ifx\epsfbox\undefined
5649
\ifwarnednoepsf \else
5650
\errhelp = \noepsfhelp
5651
\errmessage{epsf.tex not found, images will be ignored}%
5652
\global\warnednoepsftrue
5655
\imagexxx #1,,,\finish
5659
% Arguments to @image:
5660
% #1 is (mandatory) image filename; we tack on .eps extension.
5661
% #2 is (optional) width, #3 is (optional) height.
5662
% #4 is just the usual extra ignored arg for parsing this stuff.
5663
\def\imagexxx#1,#2,#3,#4\finish{%
5665
\centerline{\dopdfimage{#1}{#2}{#3}}%
5667
% \epsfbox itself resets \epsf?size at each figure.
5668
\setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
5669
\setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
5671
\catcode`\^^M = 5 % in case we're inside an example
5672
% If the image is by itself, center it.
5675
% Usually we'll have text after the image which will insert
5676
% \parskip glue, so insert it here too to equalize the space
5678
\nobreak\vskip\parskip
5680
\centerline{\epsfbox{#1.eps}}%
5683
% In the middle of a paragraph, no extra space.
5691
\message{localization,}
5694
% @documentlanguage is usually given very early, just after
5695
% @setfilename. If done too late, it may not override everything
5696
% properly. Single argument is the language abbreviation.
5697
% It would be nice if we could set up a hyphenation file here.
5699
\def\documentlanguage{\parsearg\dodocumentlanguage}
5700
\def\dodocumentlanguage#1{%
5701
\tex % read txi-??.tex file in plain TeX.
5702
% Read the file if it exists.
5703
\openin 1 txi-#1.tex
5705
\errhelp = \nolanghelp
5706
\errmessage{Cannot read language file txi-#1.tex}%
5709
\def\temp{\input txi-#1.tex }%
5714
\newhelp\nolanghelp{The given language definition file cannot be found or
5715
is empty. Maybe you need to install it? In the current directory
5716
should work if nowhere else does.}
5719
% @documentencoding should change something in TeX eventually, most
5720
% likely, but for now just recognize it.
5721
\let\documentencoding = \comment
5724
% Page size parameters.
5726
\newdimen\defaultparindent \defaultparindent = 15pt
5728
\chapheadingskip = 15pt plus 4pt minus 2pt
5729
\secheadingskip = 12pt plus 3pt minus 2pt
5730
\subsecheadingskip = 9pt plus 2pt minus 2pt
5732
% Prevent underfull vbox error messages.
5735
% Don't be so finicky about underfull hboxes, either.
5738
% Following George Bush, just get rid of widows and orphans.
5742
% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
5743
% using an old version of TeX, don't do anything. We want the amount of
5744
% stretch added to depend on the line length, hence the dependence on
5745
% \hsize. We call this whenever the paper size is set.
5747
\def\setemergencystretch{%
5748
\ifx\emergencystretch\thisisundefined
5749
% Allow us to assign to \emergencystretch anyway.
5750
\def\emergencystretch{\dimen0}%
5752
\emergencystretch = .15\hsize
5756
% Parameters in order: 1) textheight; 2) textwidth; 3) voffset;
5757
% 4) hoffset; 5) binding offset; 6) topskip. Then whoever calls us can
5758
% set \parskip and call \setleading for \baselineskip.
5760
\def\internalpagesizes#1#2#3#4#5#6{%
5763
\splittopskip = \topskip
5766
\advance\vsize by \topskip
5767
\outervsize = \vsize
5768
\advance\outervsize by 2\topandbottommargin
5769
\pageheight = \vsize
5772
\outerhsize = \hsize
5773
\advance\outerhsize by 0.5in
5776
\normaloffset = #4\relax
5777
\bindingoffset = #5\relax
5779
\parindent = \defaultparindent
5780
\setemergencystretch
5783
% @letterpaper (the default).
5784
\def\letterpaper{{\globaldefs = 1
5785
\parskip = 3pt plus 2pt minus 1pt
5786
\setleading{13.2pt}%
5788
% If page is nothing but text, make it come out even.
5789
\internalpagesizes{46\baselineskip}{6in}{\voffset}{.25in}{\bindingoffset}{36pt}%
5792
% Use @smallbook to reset parameters for 7x9.5 (or so) format.
5793
\def\smallbook{{\globaldefs = 1
5794
\parskip = 2pt plus 1pt
5797
\internalpagesizes{7.5in}{5.in}{\voffset}{.25in}{\bindingoffset}{16pt}%
5799
\lispnarrowing = 0.3in
5802
\contentsrightmargin = 0pt
5803
\deftypemargin = 0pt
5804
\defbodyindent = .5cm
5806
\let\smalldisplay = \smalldisplayx
5807
\let\smallexample = \smalllispx
5808
\let\smallformat = \smallformatx
5809
\let\smalllisp = \smalllispx
5812
% Use @afourpaper to print on European A4 paper.
5813
\def\afourpaper{{\globaldefs = 1
5815
\parskip = 3pt plus 2pt minus 1pt
5817
\internalpagesizes{53\baselineskip}{160mm}{\voffset}{4mm}{\bindingoffset}{44pt}%
5823
% A specific text layout, 24x15cm overall, intended for A4 paper. Top margin
5824
% 29mm, hence bottom margin 28mm, nominal side margin 3cm.
5825
\def\afourlatex{{\globaldefs = 1
5826
\setleading{13.6pt}%
5829
\internalpagesizes{237mm}{150mm}{3.6mm}{3.6mm}{3mm}{7mm}%
5834
% Use @afourwide to print on European A4 paper in wide format.
5837
\internalpagesizes{6.5in}{9.5in}{\hoffset}{\normaloffset}{\bindingoffset}{7mm}%
5842
% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
5843
% Perhaps we should allow setting the margins, \topskip, \parskip,
5844
% and/or leading, also. Or perhaps we should compute them somehow.
5846
\def\pagesizes{\parsearg\pagesizesxxx}
5847
\def\pagesizesxxx#1{\pagesizesyyy #1,,\finish}
5848
\def\pagesizesyyy#1,#2,#3\finish{{%
5849
\setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
5852
\parskip = 3pt plus 2pt minus 1pt
5853
\setleading{13.2pt}%
5855
\internalpagesizes{#1}{\hsize}{\voffset}{\normaloffset}{\bindingoffset}{44pt}%
5858
% Set default to letter.
5863
\message{and turning on texinfo input format.}
5865
% Define macros to output various characters with catcode for normal text.
5875
\def\normaldoublequote{"}
5878
\def\normalunderscore{_}
5879
\def\normalverticalbar{|}
5881
\def\normalgreater{>}
5883
\def\normaldollar{$}
5885
% This macro is used to make a character print one way in ttfont
5886
% where it can probably just be output, and another way in other fonts,
5887
% where something hairier probably needs to be done.
5889
% #1 is what to print if we are indeed using \tt; #2 is what to print
5890
% otherwise. Since all the Computer Modern typewriter fonts have zero
5891
% interword stretch (and shrink), and it is reasonable to expect all
5892
% typewriter fonts to have this, we can check that font parameter.
5894
\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
5896
% Same as above, but check for italic font. Actually this also catches
5897
% non-italic slanted fonts since it is impossible to distinguish them from
5898
% italic fonts. But since this is only used by $ and it uses \sl anyway
5899
% this is not a problem.
5900
\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
5902
% Turn off all special characters except @
5903
% (and those which the user can use as if they were ordinary).
5904
% Most of these we simply print from the \tt font, but for some, we can
5905
% use math or other variants that look better in normal text.
5908
\def\activedoublequote{{\tt\char34}}
5909
\let"=\activedoublequote
5911
\def~{{\tt\char126}}
5917
\def_{\ifusingtt\normalunderscore\_}
5918
% Subroutine for the previous macro.
5919
\def\_{\leavevmode \kern.06em \vbox{\hrule width.3em height.1ex}}
5922
\def|{{\tt\char124}}
5930
\def+{{\tt \char 43}}
5932
\def${\ifusingit{{\sl\$}}\normaldollar}
5933
%\catcode 27=\active
5934
%\def^^[{$\diamondsuit$}
5936
% Set up an active definition for =, but don't enable it most of the time.
5937
{\catcode`\==\active
5938
\global\def={{\tt \char 61}}}
5943
% If a .fmt file is being used, characters that might appear in a file
5944
% name cannot be active until we have parsed the command line.
5945
% So turn them off again, and have \everyjob (or @setfilename) turn them on.
5946
% \otherifyactive is called near the end of this file.
5947
\def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
5951
% \rawbackslashxx output one backslash character in current font
5952
\global\chardef\rawbackslashxx=`\\
5953
%{\catcode`\\=\other
5954
%@gdef@rawbackslashxx{\}}
5956
% \rawbackslash redefines \ as input to do \rawbackslashxx.
5957
{\catcode`\\=\active
5958
@gdef@rawbackslash{@let\=@rawbackslashxx }}
5960
% \normalbackslash outputs one backslash in fixed width font.
5961
\def\normalbackslash{{\tt\rawbackslashxx}}
5963
% \catcode 17=0 % Define control-q
5966
% Used sometimes to turn off (effectively) the active characters
5967
% even after parsing them.
5968
@def@turnoffactive{@let"=@normaldoublequote
5969
@let\=@realbackslash
5972
@let_=@normalunderscore
5973
@let|=@normalverticalbar
5975
@let>=@normalgreater
5977
@let$=@normaldollar}
5979
@def@normalturnoffactive{@let"=@normaldoublequote
5980
@let\=@normalbackslash
5983
@let_=@normalunderscore
5984
@let|=@normalverticalbar
5986
@let>=@normalgreater
5988
@let$=@normaldollar}
5990
% Make _ and + \other characters, temporarily.
5991
% This is canceled by @fixbackslash.
5994
% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
5995
% That is what \eatinput is for; after that, the `\' should revert to printing
5998
@gdef@eatinput input texinfo{@fixbackslash}
5999
@global@let\ = @eatinput
6001
% On the other hand, perhaps the file did not have a `\input texinfo'. Then
6002
% the first `\{ in the file would cause an error. This macro tries to fix
6003
% that, assuming it is called before the first `\' could plausibly occur.
6004
% Also back turn on active characters that might appear in the input
6005
% file name, in case not using a pre-dumped format.
6007
@gdef@fixbackslash{%
6008
@ifx\@eatinput @let\ = @normalbackslash @fi
6013
% Say @foo, not \foo, in error messages.
6016
% These look ok in all fonts, so just make them not special.
6017
@catcode`@& = @other
6018
@catcode`@# = @other
6019
@catcode`@% = @other
6021
@c Set initial fonts.
6027
@c eval: (add-hook 'write-file-hooks 'time-stamp)
6028
@c page-delimiter: "^\\\\message"
6029
@c time-stamp-start: "def\\\\texinfoversion{"
6030
@c time-stamp-format: "%:y-%02m-%02d.%02H"
6031
@c time-stamp-end: "}"