2
* Device Tree Souce for Buffalo KuroboxHG
4
* Choose CONFIG_LINKSTATION to build a kernel for KuroboxHG, or use
5
* the default configuration linkstation_defconfig.
7
* Based on sandpoint.dts
9
* 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
10
* Copyright 2008 Freescale Semiconductor, Inc.
12
* This file is licensed under
13
* the terms of the GNU General Public License version 2. This program
14
* is licensed "as is" without any warranty of any kind, whether express
17
XXXX add flash parts, rtc, ??
25
compatible = "linkstation";
39
PowerPC,603e { /* Really 8241 */
42
clock-frequency = <266000000>; /* Fixed by bootloader */
43
timebase-frequency = <32522240>; /* Fixed by bootloader */
44
bus-frequency = <0>; /* Fixed by bootloader */
45
/* Following required by dtc but not used */
46
i-cache-size = <0x4000>;
47
d-cache-size = <0x4000>;
52
device_type = "memory";
53
reg = <0x0 0x8000000>;
56
soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
60
compatible = "mpc10x";
61
store-gathering = <0>; /* 0 == off, !0 == on */
62
reg = <0x80000000 0x100000>;
63
ranges = <0x80000000 0x80000000 0x70000000 /* pci mem space */
64
0xfc000000 0xfc000000 0x100000 /* EUMB */
65
0xfe000000 0xfe000000 0xc00000 /* pci i/o space */
66
0xfec00000 0xfec00000 0x300000 /* pci cfg regs */
67
0xfef00000 0xfef00000 0x100000>; /* pci iack */
73
compatible = "fsl-i2c";
74
reg = <0x80003000 0x1000>;
76
interrupt-parent = <&mpic>;
79
compatible = "ricoh,rs5c372a";
84
serial0: serial@80004500 {
86
device_type = "serial";
87
compatible = "ns16550";
88
reg = <0x80004500 0x8>;
89
clock-frequency = <130041000>;
90
current-speed = <9600>;
92
interrupt-parent = <&mpic>;
95
serial1: serial@80004600 {
97
device_type = "serial";
98
compatible = "ns16550";
99
reg = <0x80004600 0x8>;
100
clock-frequency = <130041000>;
101
current-speed = <57600>;
103
interrupt-parent = <&mpic>;
106
mpic: interrupt-controller@80040000 {
107
#interrupt-cells = <2>;
108
#address-cells = <0>;
109
device_type = "open-pic";
110
compatible = "chrp,open-pic";
111
interrupt-controller;
112
reg = <0x80040000 0x40000>;
116
#address-cells = <3>;
118
#interrupt-cells = <1>;
120
compatible = "mpc10x-pci";
121
reg = <0xfec00000 0x400000>;
122
ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0xc00000
123
0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
125
clock-frequency = <133333333>;
126
interrupt-parent = <&mpic>;
127
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
129
/* IDSEL 11 - IRQ0 ETH */
130
0x5800 0x0 0x0 0x1 &mpic 0x0 0x1
131
0x5800 0x0 0x0 0x2 &mpic 0x1 0x1
132
0x5800 0x0 0x0 0x3 &mpic 0x2 0x1
133
0x5800 0x0 0x0 0x4 &mpic 0x3 0x1
134
/* IDSEL 12 - IRQ1 IDE0 */
135
0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
136
0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
137
0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
138
0x6000 0x0 0x0 0x4 &mpic 0x0 0x1
139
/* IDSEL 14 - IRQ3 USB2.0 */
140
0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
141
0x7000 0x0 0x0 0x2 &mpic 0x3 0x1
142
0x7000 0x0 0x0 0x3 &mpic 0x3 0x1
143
0x7000 0x0 0x0 0x4 &mpic 0x3 0x1