2
* Copyright (C) 2004 by Thomas Rathbone, HP Labs
3
* Copyright (C) 2005 by Ivan Kokshaysky
4
* Copyright (C) 2006 by SAN People
6
* This program is free software; you can redistribute it and/or modify
7
* it under the terms of the GNU General Public License as published by
8
* the Free Software Foundation; either version 2 of the License, or
9
* (at your option) any later version.
11
* This program is distributed in the hope that it will be useful,
12
* but WITHOUT ANY WARRANTY; without even the implied warranty of
13
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14
* GNU General Public License for more details.
16
* You should have received a copy of the GNU General Public License
17
* along with this program; if not, write to the
18
* Free Software Foundation, Inc.,
19
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
26
* USB Device Port (UDP) registers.
27
* Based on AT91RM9200 datasheet revision E.
30
#define AT91_UDP_FRM_NUM 0x00 /* Frame Number Register */
31
#define AT91_UDP_NUM (0x7ff << 0) /* Frame Number */
32
#define AT91_UDP_FRM_ERR (1 << 16) /* Frame Error */
33
#define AT91_UDP_FRM_OK (1 << 17) /* Frame OK */
35
#define AT91_UDP_GLB_STAT 0x04 /* Global State Register */
36
#define AT91_UDP_FADDEN (1 << 0) /* Function Address Enable */
37
#define AT91_UDP_CONFG (1 << 1) /* Configured */
38
#define AT91_UDP_ESR (1 << 2) /* Enable Send Resume */
39
#define AT91_UDP_RSMINPR (1 << 3) /* Resume has been sent */
40
#define AT91_UDP_RMWUPE (1 << 4) /* Remote Wake Up Enable */
42
#define AT91_UDP_FADDR 0x08 /* Function Address Register */
43
#define AT91_UDP_FADD (0x7f << 0) /* Function Address Value */
44
#define AT91_UDP_FEN (1 << 8) /* Function Enable */
46
#define AT91_UDP_IER 0x10 /* Interrupt Enable Register */
47
#define AT91_UDP_IDR 0x14 /* Interrupt Disable Register */
48
#define AT91_UDP_IMR 0x18 /* Interrupt Mask Register */
50
#define AT91_UDP_ISR 0x1c /* Interrupt Status Register */
51
#define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */
52
#define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */
53
#define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */
54
#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status [AT91RM9200 only] */
55
#define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */
56
#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrupt Status */
57
#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status [AT91RM9200 only] */
59
#define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */
60
#define AT91_UDP_RST_EP 0x28 /* Reset Endpoint Register */
62
#define AT91_UDP_CSR(n) (0x30+((n)*4)) /* Endpoint Control/Status Registers 0-7 */
63
#define AT91_UDP_TXCOMP (1 << 0) /* Generates IN packet with data previously written in DPR */
64
#define AT91_UDP_RX_DATA_BK0 (1 << 1) /* Receive Data Bank 0 */
65
#define AT91_UDP_RXSETUP (1 << 2) /* Send STALL to the host */
66
#define AT91_UDP_STALLSENT (1 << 3) /* Stall Sent / Isochronous error (Isochronous endpoints) */
67
#define AT91_UDP_TXPKTRDY (1 << 4) /* Transmit Packet Ready */
68
#define AT91_UDP_FORCESTALL (1 << 5) /* Force Stall */
69
#define AT91_UDP_RX_DATA_BK1 (1 << 6) /* Receive Data Bank 1 */
70
#define AT91_UDP_DIR (1 << 7) /* Transfer Direction */
71
#define AT91_UDP_EPTYPE (7 << 8) /* Endpoint Type */
72
#define AT91_UDP_EPTYPE_CTRL (0 << 8)
73
#define AT91_UDP_EPTYPE_ISO_OUT (1 << 8)
74
#define AT91_UDP_EPTYPE_BULK_OUT (2 << 8)
75
#define AT91_UDP_EPTYPE_INT_OUT (3 << 8)
76
#define AT91_UDP_EPTYPE_ISO_IN (5 << 8)
77
#define AT91_UDP_EPTYPE_BULK_IN (6 << 8)
78
#define AT91_UDP_EPTYPE_INT_IN (7 << 8)
79
#define AT91_UDP_DTGLE (1 << 11) /* Data Toggle */
80
#define AT91_UDP_EPEDS (1 << 15) /* Endpoint Enable/Disable */
81
#define AT91_UDP_RXBYTECNT (0x7ff << 16) /* Number of bytes in FIFO */
83
#define AT91_UDP_FDR(n) (0x50+((n)*4)) /* Endpoint FIFO Data Registers 0-7 */
85
#define AT91_UDP_TXVC 0x74 /* Transceiver Control Register */
86
#define AT91_UDP_TXVC_TXVDIS (1 << 8) /* Transceiver Disable */
87
#define AT91_UDP_TXVC_PUON (1 << 9) /* PullUp On [AT91SAM9260 only] */
89
/*-------------------------------------------------------------------------*/
92
* controller driver data structures
95
#define NUM_ENDPOINTS 6
98
* hardware won't disable bus reset, or resume while the controller
99
* is suspended ... watching suspend helps keep the logic symmetric.
101
#define MINIMUS_INTERRUPTUS \
102
(AT91_UDP_ENDBUSRES | AT91_UDP_RXRSM | AT91_UDP_RXSUSP)
106
struct list_head queue;
107
struct at91_udc *udc;
110
unsigned maxpacket:16;
112
unsigned is_pingpong:1;
117
unsigned fifo_bank:1;
119
const struct usb_endpoint_descriptor
124
* driver is non-SMP, and just blocks IRQs whenever it needs
125
* access protection for chip registers or driver state
128
struct usb_gadget gadget;
129
struct at91_ep ep[NUM_ENDPOINTS];
130
struct usb_gadget_driver *driver;
134
unsigned suspended:1;
135
unsigned req_pending:1;
136
unsigned wait_for_addr_ack:1;
137
unsigned wait_for_config_ack:1;
138
unsigned selfpowered:1;
139
unsigned active_suspend:1;
141
struct at91_udc_data board;
142
struct clk *iclk, *fclk;
143
struct platform_device *pdev;
144
struct proc_dir_entry *pde;
145
void __iomem *udp_baseaddr;
149
static inline struct at91_udc *to_udc(struct usb_gadget *g)
151
return container_of(g, struct at91_udc, gadget);
154
struct at91_request {
155
struct usb_request req;
156
struct list_head queue;
159
/*-------------------------------------------------------------------------*/
164
# define VDBG(stuff...) do{}while(0)
170
# define PACKET(stuff...) do{}while(0)
173
#define ERR(stuff...) pr_err("udc: " stuff)
174
#define WARNING(stuff...) pr_warning("udc: " stuff)
175
#define INFO(stuff...) pr_info("udc: " stuff)
176
#define DBG(stuff...) pr_debug("udc: " stuff)