3
# This file describes the settings to be used by the documentation system
4
# doxygen (www.doxygen.org) for a project
6
# All text after a hash (#) is considered a comment and will be ignored
8
# TAG = value [value, ...]
9
# For lists items can also be appended using:
10
# TAG += value [value, ...]
11
# Values that contain spaces should be placed between quotes (" ")
13
#---------------------------------------------------------------------------
14
# Project related configuration options
15
#---------------------------------------------------------------------------
17
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
18
# by quotes) that should identify the project.
22
# The PROJECT_NUMBER tag can be used to enter a project or revision number.
23
# This could be handy for archiving the generated documentation or
24
# if some version control system is used.
28
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
29
# base path where the generated documentation will be put.
30
# If a relative path is entered, it will be relative to the location
31
# where doxygen was started. If left blank the current directory will be used.
33
OUTPUT_DIRECTORY = $(MAUS_ROOT_DIR)/doc/doxygen_backend/
35
# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
36
# 4096 sub-directories (in 2 levels) under the output directory of each output
37
# format and will distribute the generated files over these directories.
38
# Enabling this option can be useful when feeding doxygen a huge amount of source
39
# files, where putting all generated files in the same directory would otherwise
40
# cause performance problems for the file system.
44
# The OUTPUT_LANGUAGE tag is used to specify the language in which all
45
# documentation generated by doxygen is written. Doxygen will use this
46
# information to generate all constant output in the proper language.
47
# The default language is English, other supported languages are:
48
# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish,
49
# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese,
50
# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian,
51
# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish,
52
# Swedish, and Ukrainian.
54
OUTPUT_LANGUAGE = English
56
# This tag can be used to specify the encoding used in the generated output.
57
# The encoding is not always determined by the language that is chosen,
58
# but also whether or not the output is meant for Windows or non-Windows users.
59
# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
60
# forces the Windows encoding (this is the default for the Windows binary),
61
# whereas setting the tag to NO uses a Unix-style encoding (the default for
62
# all platforms other than Windows).
64
USE_WINDOWS_ENCODING = NO
66
# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
67
# include brief member descriptions after the members that are listed in
68
# the file and class documentation (similar to JavaDoc).
69
# Set to NO to disable this.
71
BRIEF_MEMBER_DESC = YES
73
# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
74
# the brief description of a member or function before the detailed description.
75
# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
76
# brief descriptions will be completely suppressed.
80
# This tag implements a quasi-intelligent brief description abbreviator
81
# that is used to form the text in various listings. Each string
82
# in this list, if found as the leading text of the brief description, will be
83
# stripped from the text and the result after processing the whole list, is used
84
# as the annotated text. Otherwise, the brief description is used as-is. If left
85
# blank, the following values are used ("$name" is automatically replaced with the
86
# name of the entity): "The $name class" "The $name widget" "The $name file"
87
# "is" "provides" "specifies" "contains" "represents" "a" "an" "the"
91
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
92
# Doxygen will generate a detailed section even if there is only a brief
95
ALWAYS_DETAILED_SEC = NO
97
# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited
98
# members of a class in the documentation of that class as if those members were
99
# ordinary class members. Constructors, destructors and assignment operators of
100
# the base classes will not be shown.
102
INLINE_INHERITED_MEMB = NO
104
# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
105
# path before files name in the file list and in the header files. If set
106
# to NO the shortest path that makes the file name unique will be used.
108
FULL_PATH_NAMES = YES
110
# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
111
# can be used to strip a user-defined part of the path. Stripping is
112
# only done if one of the specified strings matches the left-hand part of
113
# the path. The tag can be used to show relative paths in the file list.
114
# If left blank the directory from which doxygen is run is used as the
119
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
120
# the path mentioned in the documentation of a class, which tells
121
# the reader which header file to include in order to use a class.
122
# If left blank only the name of the header file containing the class
123
# definition is used. Otherwise one should specify the include paths that
124
# are normally passed to the compiler using the -I flag.
126
STRIP_FROM_INC_PATH =
128
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
129
# (but less readable) file names. This can be useful is your file systems
130
# doesn't support long names like on DOS, Mac, or CD-ROM.
134
# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
135
# will interpret the first line (until the first dot) of a JavaDoc-style
136
# comment as the brief description. If set to NO, the JavaDoc
137
# comments will behave just like the Qt-style comments (thus requiring an
138
# explicit @brief command for a brief description.
140
JAVADOC_AUTOBRIEF = YES
142
# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
143
# treat a multi-line C++ special comment block (i.e. a block of //! or ///
144
# comments) as a brief description. This used to be the default behaviour.
145
# The new default is to treat a multi-line C++ comment block as a detailed
146
# description. Set this tag to YES if you prefer the old behaviour instead.
148
MULTILINE_CPP_IS_BRIEF = YES
150
# If the DETAILS_AT_TOP tag is set to YES then Doxygen
151
# will output the detailed description near the top, like JavaDoc.
152
# If set to NO, the detailed description appears after the member
157
# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
158
# member inherits the documentation from any documented member that it
163
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
164
# tag is set to YES, then doxygen will reuse the documentation of the first
165
# member in the group (if any) for the other members of the group. By default
166
# all members of a group must be documented explicitly.
168
DISTRIBUTE_GROUP_DOC = NO
170
# The TAB_SIZE tag can be used to set the number of spaces in a tab.
171
# Doxygen uses this value to replace tabs by spaces in code fragments.
175
# This tag can be used to specify a number of aliases that acts
176
# as commands in the documentation. An alias has the form "name=value".
177
# For example adding "sideeffect=\par Side Effects:\n" will allow you to
178
# put the command \sideeffect (or @sideeffect) in the documentation, which
179
# will result in a user-defined paragraph with heading "Side Effects:".
180
# You can put \n's in the value part of an alias to insert newlines.
184
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
185
# only. Doxygen will then generate output that is more tailored for C.
186
# For instance, some of the names that are used will be different. The list
187
# of all members will be omitted, etc.
189
OPTIMIZE_OUTPUT_FOR_C = NO
191
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources
192
# only. Doxygen will then generate output that is more tailored for Java.
193
# For instance, namespaces will be presented as packages, qualified scopes
194
# will look different, etc.
196
OPTIMIZE_OUTPUT_JAVA = NO
198
# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
199
# the same type (for instance a group of public functions) to be put as a
200
# subgroup of that type (e.g. under the Public Functions section). Set it to
201
# NO to prevent subgrouping. Alternatively, this can be done per class using
202
# the \nosubgrouping command.
206
#---------------------------------------------------------------------------
207
# Build related configuration options
208
#---------------------------------------------------------------------------
210
# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
211
# documentation are documented, even if no documentation was available.
212
# Private class members and static file members will be hidden unless
213
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
217
# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
218
# will be included in the documentation.
220
EXTRACT_PRIVATE = YES
222
# If the EXTRACT_STATIC tag is set to YES all static members of a file
223
# will be included in the documentation.
227
# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
228
# defined locally in source files will be included in the documentation.
229
# If set to NO only classes defined in header files are included.
231
EXTRACT_LOCAL_CLASSES = NO
233
# This flag is only useful for Objective-C code. When set to YES local
234
# methods, which are defined in the implementation section but not in
235
# the interface are included in the documentation.
236
# If set to NO (the default) only methods in the interface are included.
238
EXTRACT_LOCAL_METHODS = NO
240
# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
241
# undocumented members of documented classes, files or namespaces.
242
# If set to NO (the default) these members will be included in the
243
# various overviews, but no documentation section is generated.
244
# This option has no effect if EXTRACT_ALL is enabled.
246
HIDE_UNDOC_MEMBERS = NO
248
# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
249
# undocumented classes that are normally visible in the class hierarchy.
250
# If set to NO (the default) these classes will be included in the various
251
# overviews. This option has no effect if EXTRACT_ALL is enabled.
253
HIDE_UNDOC_CLASSES = YES
255
# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
256
# friend (class|struct|union) declarations.
257
# If set to NO (the default) these declarations will be included in the
260
HIDE_FRIEND_COMPOUNDS = NO
262
# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
263
# documentation blocks found inside the body of a function.
264
# If set to NO (the default) these blocks will be appended to the
265
# function's detailed documentation block.
267
HIDE_IN_BODY_DOCS = NO
269
# The INTERNAL_DOCS tag determines if documentation
270
# that is typed after a \internal command is included. If the tag is set
271
# to NO (the default) then the documentation will be excluded.
272
# Set it to YES to include the internal documentation.
276
# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
277
# file names in lower-case letters. If set to YES upper-case letters are also
278
# allowed. This is useful if you have classes or files whose names only differ
279
# in case and if your file system supports case sensitive file names. Windows
280
# and Mac users are advised to set this option to NO.
282
CASE_SENSE_NAMES = YES
284
# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
285
# will show members with their full class and namespace scopes in the
286
# documentation. If set to YES the scope will be hidden.
288
HIDE_SCOPE_NAMES = YES
290
# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
291
# will put a list of the files that are included by a file in the documentation
294
SHOW_INCLUDE_FILES = YES
300
# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
301
# is inserted in the documentation for inline members.
305
# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
306
# will sort the (detailed) documentation of file and class members
307
# alphabetically by member name. If set to NO the members will appear in
310
SORT_MEMBER_DOCS = YES
312
# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
313
# brief documentation of file, namespace and class members alphabetically
314
# by member name. If set to NO (the default) the members will appear in
317
SORT_BRIEF_DOCS = YES
319
# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
320
# sorted by fully-qualified names, including namespaces. If set to
321
# NO (the default), the class list will be sorted only by class name,
322
# not including the namespace part.
323
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
324
# Note: This option applies only to the class list, not to the
327
SORT_BY_SCOPE_NAME = YES
329
# The GENERATE_TODOLIST tag can be used to enable (YES) or
330
# disable (NO) the todo list. This list is created by putting \todo
331
# commands in the documentation.
333
GENERATE_TODOLIST = YES
335
# The GENERATE_TESTLIST tag can be used to enable (YES) or
336
# disable (NO) the test list. This list is created by putting \test
337
# commands in the documentation.
339
GENERATE_TESTLIST = YES
341
# The GENERATE_BUGLIST tag can be used to enable (YES) or
342
# disable (NO) the bug list. This list is created by putting \bug
343
# commands in the documentation.
345
GENERATE_BUGLIST = YES
347
# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
348
# disable (NO) the deprecated list. This list is created by putting
349
# \deprecated commands in the documentation.
351
GENERATE_DEPRECATEDLIST= YES
353
# The ENABLED_SECTIONS tag can be used to enable conditional
354
# documentation sections, marked by \if sectionname ... \endif.
358
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
359
# the initial value of a variable or define consists of for it to appear in
360
# the documentation. If the initializer consists of more lines than specified
361
# here it will be hidden. Use a value of 0 to hide initializers completely.
362
# The appearance of the initializer of individual variables and defines in the
363
# documentation can be controlled using \showinitializer or \hideinitializer
364
# command in the documentation regardless of this setting.
366
MAX_INITIALIZER_LINES = 30
368
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
369
# at the bottom of the documentation of classes and structs. If set to YES the
370
# list will mention the files that were used to generate the documentation.
372
SHOW_USED_FILES = YES
374
# If the sources in your project are distributed over multiple directories
375
# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
376
# in the documentation.
378
SHOW_DIRECTORIES = YES
380
#---------------------------------------------------------------------------
381
# configuration options related to warning and progress messages
382
#---------------------------------------------------------------------------
384
# The QUIET tag can be used to turn on/off the messages that are generated
385
# by doxygen. Possible values are YES and NO. If left blank NO is used.
389
# The WARNINGS tag can be used to turn on/off the warning messages that are
390
# generated by doxygen. Possible values are YES and NO. If left blank
395
# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
396
# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
397
# automatically be disabled.
399
WARN_IF_UNDOCUMENTED = YES
401
# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
402
# potential errors in the documentation, such as not documenting some
403
# parameters in a documented function, or documenting parameters that
404
# don't exist or using markup commands wrongly.
406
WARN_IF_DOC_ERROR = YES
408
# The WARN_FORMAT tag determines the format of the warning messages that
409
# doxygen can produce. The string should contain the $file, $line, and $text
410
# tags, which will be replaced by the file and line number from which the
411
# warning originated and the warning text.
413
WARN_FORMAT = "$file:$line: $text"
415
# The WARN_LOGFILE tag can be used to specify a file to which warning
416
# and error messages should be written. If left blank the output is written
421
#---------------------------------------------------------------------------
422
# configuration options related to the input files
423
#---------------------------------------------------------------------------
425
# The INPUT tag can be used to specify the files and/or directories that contain
426
# documented source files. You may enter file names like "myfile.cpp" or
427
# directories like "/usr/src/myproject". Separate the files or directories
430
INPUT = $(MAUS_ROOT_DIR)/doc/doc_tools/backend.hh $(MAUS_ROOT_DIR)/src/legacy
432
# If the value of the INPUT tag contains directories, you can use the
433
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
434
# and *.h) to filter out the source-files in the directories. If left
435
# blank the following patterns are tested:
436
# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp
437
# *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
439
FILE_PATTERNS = *.py *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
441
# The RECURSIVE tag can be used to turn specify whether or not subdirectories
442
# should be searched for input files as well. Possible values are YES and NO.
443
# If left blank NO is used.
447
# The EXCLUDE tag can be used to specify files and/or directories that should
448
# excluded from the INPUT source files. This way you can easily exclude a
449
# subdirectory from a directory tree whose root is specified with the INPUT tag.
453
# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories
454
# that are symbolic links (a Unix filesystem feature) are excluded from the input.
456
EXCLUDE_SYMLINKS = NO
458
# If the value of the INPUT tag contains directories, you can use the
459
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
460
# certain files from those directories.
462
EXCLUDE_PATTERNS = */build/* */test_*.py
464
# The EXAMPLE_PATH tag can be used to specify one or more files or
465
# directories that contain example code fragments that are included (see
466
# the \include command).
470
# If the value of the EXAMPLE_PATH tag contains directories, you can use the
471
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
472
# and *.h) to filter out the source-files in the directories. If left
473
# blank all files are included.
477
# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
478
# searched for input files to be used with the \include or \dontinclude
479
# commands irrespective of the value of the RECURSIVE tag.
480
# Possible values are YES and NO. If left blank NO is used.
482
EXAMPLE_RECURSIVE = NO
484
# The IMAGE_PATH tag can be used to specify one or more files or
485
# directories that contain image that are included in the documentation (see
486
# the \image command).
490
# The INPUT_FILTER tag can be used to specify a program that doxygen should
491
# invoke to filter for each input file. Doxygen will invoke the filter program
492
# by executing (via popen()) the command <filter> <input-file>, where <filter>
493
# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
494
# input file. Doxygen will then use the output that the filter program writes
495
# to standard output. If FILTER_PATTERNS is specified, this tag will be
500
# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
501
# basis. Doxygen will compare the file name with each pattern and apply the
502
# filter if there is a match. The filters are a list of the form:
503
# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
504
# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
505
# is applied to all files.
509
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
510
# INPUT_FILTER) will be used to filter the input files when producing source
511
# files to browse (i.e. when SOURCE_BROWSER is set to YES).
513
FILTER_SOURCE_FILES = NO
515
#---------------------------------------------------------------------------
516
# configuration options related to source browsing
517
#---------------------------------------------------------------------------
519
# If the SOURCE_BROWSER tag is set to YES then a list of source files will
520
# be generated. Documented entities will be cross-referenced with these sources.
521
# Note: To get rid of all source code in the generated output, make sure also
522
# VERBATIM_HEADERS is set to NO.
526
# Setting the INLINE_SOURCES tag to YES will include the body
527
# of functions and classes directly in the documentation.
531
# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
532
# doxygen to hide any special comment blocks from generated source code
533
# fragments. Normal C and C++ comments will always remain visible.
535
STRIP_CODE_COMMENTS = NO
537
# If the REFERENCED_BY_RELATION tag is set to YES (the default)
538
# then for each documented function all documented
539
# functions referencing it will be listed.
541
REFERENCED_BY_RELATION = YES
543
# If the REFERENCES_RELATION tag is set to YES (the default)
544
# then for each documented function all documented entities
545
# called/used by that function will be listed.
547
REFERENCES_RELATION = YES
549
# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
550
# will generate a verbatim copy of the header file for each class for
551
# which an include is specified. Set to NO to disable this.
553
VERBATIM_HEADERS = YES
555
#---------------------------------------------------------------------------
556
# configuration options related to the alphabetical class index
557
#---------------------------------------------------------------------------
559
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
560
# of all compounds will be generated. Enable this if the project
561
# contains a lot of classes, structs, unions or interfaces.
563
ALPHABETICAL_INDEX = YES
565
# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
566
# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
567
# in which this list will be split (can be a number in the range [1..20])
569
COLS_IN_ALPHA_INDEX = 5
571
# In case all classes in a project start with a common prefix, all
572
# classes will be put under the same header in the alphabetical index.
573
# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
574
# should be ignored while generating the index headers.
576
IGNORE_PREFIX = cheprep HEPREP unittest
578
#---------------------------------------------------------------------------
579
# configuration options related to the HTML output
580
#---------------------------------------------------------------------------
582
# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
583
# generate HTML output.
587
# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
588
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
589
# put in front of it. If left blank `html' will be used as the default path.
593
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
594
# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
595
# doxygen will generate files with .html extension.
597
HTML_FILE_EXTENSION = .html
599
# The HTML_HEADER tag can be used to specify a personal HTML header for
600
# each generated HTML page. If it is left blank doxygen will generate a
605
# The HTML_FOOTER tag can be used to specify a personal HTML footer for
606
# each generated HTML page. If it is left blank doxygen will generate a
611
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
612
# style sheet that is used by each HTML page. It can be used to
613
# fine-tune the look of the HTML output. If the tag is left blank doxygen
614
# will generate a default style sheet. Note that doxygen will try to copy
615
# the style sheet file to the HTML output directory, so don't put your own
616
# stylesheet in the HTML output directory as well, or it will be erased!
620
# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
621
# files or namespaces will be aligned in HTML using tables. If set to
622
# NO a bullet list will be used.
624
HTML_ALIGN_MEMBERS = YES
626
# If the GENERATE_HTMLHELP tag is set to YES, additional index files
627
# will be generated that can be used as input for tools like the
628
# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
629
# of the generated HTML documentation.
631
GENERATE_HTMLHELP = NO
633
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
634
# be used to specify the file name of the resulting .chm file. You
635
# can add a path in front of the file if the result should not be
636
# written to the html output directory.
640
# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
641
# be used to specify the location (absolute path including file name) of
642
# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
643
# the HTML help compiler on the generated index.hhp.
647
# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
648
# controls if a separate .chi index file is generated (YES) or that
649
# it should be included in the master .chm file (NO).
653
# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
654
# controls whether a binary table of contents is generated (YES) or a
655
# normal table of contents (NO) in the .chm file.
659
# The TOC_EXPAND flag can be set to YES to add extra items for group members
660
# to the contents of the HTML help documentation and to the tree view.
664
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
665
# top of each HTML page. The value NO (the default) enables the index and
666
# the value YES disables it.
670
# This tag can be used to set the number of enum values (range [1..20])
671
# that doxygen will group on one line in the generated HTML documentation.
673
ENUM_VALUES_PER_LINE = 4
675
# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
676
# generated containing a tree-like index structure (just like the one that
677
# is generated for HTML Help). For this to work a browser that supports
678
# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
679
# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
680
# probably better off using the HTML help feature.
682
GENERATE_TREEVIEW = NO
684
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
685
# used to set the initial width (in pixels) of the frame in which the tree
690
#---------------------------------------------------------------------------
691
# configuration options related to the LaTeX output
692
#---------------------------------------------------------------------------
694
# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
695
# generate Latex output.
699
# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
700
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
701
# put in front of it. If left blank `latex' will be used as the default path.
705
# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
706
# invoked. If left blank `latex' will be used as the default command name.
708
LATEX_CMD_NAME = latex
710
# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
711
# generate index for LaTeX. If left blank `makeindex' will be used as the
712
# default command name.
714
MAKEINDEX_CMD_NAME = makeindex
716
# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
717
# LaTeX documents. This may be useful for small projects and may help to
718
# save some trees in general.
722
# The PAPER_TYPE tag can be used to set the paper type that is used
723
# by the printer. Possible values are: a4, a4wide, letter, legal and
724
# executive. If left blank a4wide will be used.
728
# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
729
# packages that should be included in the LaTeX output.
733
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
734
# the generated latex document. The header should contain everything until
735
# the first chapter. If it is left blank doxygen will generate a
736
# standard header. Notice: only use this tag if you know what you are doing!
740
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
741
# is prepared for conversion to pdf (using ps2pdf). The pdf file will
742
# contain links (just like the HTML output) instead of page references
743
# This makes the output suitable for online browsing using a pdf viewer.
747
# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
748
# plain latex in the generated Makefile. Set this option to YES to get a
749
# higher quality PDF documentation.
753
# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
754
# command to the generated LaTeX files. This will instruct LaTeX to keep
755
# running if errors occur, instead of asking the user for help.
756
# This option is also used when generating formulas in HTML.
760
# If LATEX_HIDE_INDICES is set to YES then doxygen will not
761
# include the index chapters (such as File Index, Compound Index, etc.)
764
LATEX_HIDE_INDICES = NO
766
#---------------------------------------------------------------------------
767
# configuration options related to the RTF output
768
#---------------------------------------------------------------------------
770
# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
771
# The RTF output is optimized for Word 97 and may not look very pretty with
772
# other RTF readers or editors.
776
# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
777
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
778
# put in front of it. If left blank `rtf' will be used as the default path.
782
# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
783
# RTF documents. This may be useful for small projects and may help to
784
# save some trees in general.
788
# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
789
# will contain hyperlink fields. The RTF file will
790
# contain links (just like the HTML output) instead of page references.
791
# This makes the output suitable for online browsing using WORD or other
792
# programs which support those fields.
793
# Note: wordpad (write) and others do not support links.
797
# Load stylesheet definitions from file. Syntax is similar to doxygen's
798
# config file, i.e. a series of assignments. You only have to provide
799
# replacements, missing definitions are set to their default value.
801
RTF_STYLESHEET_FILE =
803
# Set optional variables used in the generation of an rtf document.
804
# Syntax is similar to doxygen's config file.
806
RTF_EXTENSIONS_FILE =
808
#---------------------------------------------------------------------------
809
# configuration options related to the man page output
810
#---------------------------------------------------------------------------
812
# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
817
# The MAN_OUTPUT tag is used to specify where the man pages will be put.
818
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
819
# put in front of it. If left blank `man' will be used as the default path.
823
# The MAN_EXTENSION tag determines the extension that is added to
824
# the generated man pages (default is the subroutine's section .3)
828
# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
829
# then it will generate one additional man file for each entity
830
# documented in the real man page(s). These additional files
831
# only source the real man page, but without them the man command
832
# would be unable to find the correct page. The default is NO.
836
#---------------------------------------------------------------------------
837
# configuration options related to the XML output
838
#---------------------------------------------------------------------------
840
# If the GENERATE_XML tag is set to YES Doxygen will
841
# generate an XML file that captures the structure of
842
# the code including all documentation.
846
# The XML_OUTPUT tag is used to specify where the XML pages will be put.
847
# If a relative path is entered the value of OUTPUT_DIRECTORY will be
848
# put in front of it. If left blank `xml' will be used as the default path.
852
# The XML_SCHEMA tag can be used to specify an XML schema,
853
# which can be used by a validating XML parser to check the
854
# syntax of the XML files.
858
# The XML_DTD tag can be used to specify an XML DTD,
859
# which can be used by a validating XML parser to check the
860
# syntax of the XML files.
864
# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
865
# dump the program listings (including syntax highlighting
866
# and cross-referencing information) to the XML output. Note that
867
# enabling this will significantly increase the size of the XML output.
869
XML_PROGRAMLISTING = YES
871
#---------------------------------------------------------------------------
872
# configuration options for the AutoGen Definitions output
873
#---------------------------------------------------------------------------
875
# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
876
# generate an AutoGen Definitions (see autogen.sf.net) file
877
# that captures the structure of the code including all
878
# documentation. Note that this feature is still experimental
879
# and incomplete at the moment.
881
GENERATE_AUTOGEN_DEF = NO
883
#---------------------------------------------------------------------------
884
# configuration options related to the Perl module output
885
#---------------------------------------------------------------------------
887
# If the GENERATE_PERLMOD tag is set to YES Doxygen will
888
# generate a Perl module file that captures the structure of
889
# the code including all documentation. Note that this
890
# feature is still experimental and incomplete at the
893
GENERATE_PERLMOD = NO
895
# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
896
# the necessary Makefile rules, Perl scripts and LaTeX code to be able
897
# to generate PDF and DVI output from the Perl module output.
901
# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
902
# nicely formatted so it can be parsed by a human reader. This is useful
903
# if you want to understand what is going on. On the other hand, if this
904
# tag is set to NO the size of the Perl module output will be much smaller
905
# and Perl will parse it just the same.
909
# The names of the make variables in the generated doxyrules.make file
910
# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
911
# This is useful so different doxyrules.make files included by the same
912
# Makefile don't overwrite each other's variables.
914
PERLMOD_MAKEVAR_PREFIX =
916
#---------------------------------------------------------------------------
917
# Configuration options related to the preprocessor
918
#---------------------------------------------------------------------------
920
# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
921
# evaluate all C-preprocessor directives found in the sources and include
924
ENABLE_PREPROCESSING = YES
926
# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
927
# names in the source code. If set to NO (the default) only conditional
928
# compilation will be performed. Macro expansion can be done in a controlled
929
# way by setting EXPAND_ONLY_PREDEF to YES.
933
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
934
# then the macro expansion is limited to the macros specified with the
935
# PREDEFINED and EXPAND_AS_PREDEFINED tags.
937
EXPAND_ONLY_PREDEF = NO
939
# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
940
# in the INCLUDE_PATH (see below) will be search if a #include is found.
942
SEARCH_INCLUDES = YES
944
# The INCLUDE_PATH tag can be used to specify one or more directories that
945
# contain include files that are not input files but should be processed by
950
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
951
# patterns (like *.h and *.hpp) to filter out the header-files in the
952
# directories. If left blank, the patterns specified with FILE_PATTERNS will
955
INCLUDE_FILE_PATTERNS =
957
# The PREDEFINED tag can be used to specify one or more macro names that
958
# are defined before the preprocessor is started (similar to the -D option of
959
# gcc). The argument of the tag is a list of macros of the form: name
960
# or name=definition (no spaces). If the definition and the = are
961
# omitted =1 is assumed. To prevent a macro definition from being
962
# undefined via #undef or recursively expanded use the := operator
963
# instead of the = operator.
967
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
968
# this tag can be used to specify a list of macro names that should be expanded.
969
# The macro definition that is found in the sources will be used.
970
# Use the PREDEFINED tag if you want to use a different macro definition.
974
# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
975
# doxygen's preprocessor will remove all function-like macros that are alone
976
# on a line, have an all uppercase name, and do not end with a semicolon. Such
977
# function macros are typically used for boiler-plate code, and will confuse the
978
# parser if not removed.
980
SKIP_FUNCTION_MACROS = YES
982
#---------------------------------------------------------------------------
983
# Configuration::additions related to external references
984
#---------------------------------------------------------------------------
986
# The TAGFILES option can be used to specify one or more tagfiles.
987
# Optionally an initial location of the external documentation
988
# can be added for each tagfile. The format of a tag file without
989
# this location is as follows:
990
# TAGFILES = file1 file2 ...
991
# Adding location for the tag files is done as follows:
992
# TAGFILES = file1=loc1 "file2 = loc2" ...
993
# where "loc1" and "loc2" can be relative or absolute paths or
994
# URLs. If a location is present for each tag, the installdox tool
995
# does not have to be run to correct the links.
996
# Note that each tag file must have a unique name
997
# (where the name does NOT include the path)
998
# If a tag file is not located in the directory in which doxygen
999
# is run, you must also specify the path to the tagfile here.
1003
# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1004
# a tag file that is based on the input files it reads.
1006
GENERATE_TAGFILE = $(MAUS_ROOT_DIR)/doc/doxygen_backend/commonCpp.tag
1008
# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1009
# in the class index. If set to NO only the inherited external classes
1014
# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1015
# in the modules index. If set to NO, only the current project's groups will
1018
EXTERNAL_GROUPS = NO
1020
# The PERL_PATH should be the absolute path and name of the perl script
1021
# interpreter (i.e. the result of `which perl').
1023
PERL_PATH = /usr/bin/perl
1025
#---------------------------------------------------------------------------
1026
# Configuration options related to the dot tool
1027
#---------------------------------------------------------------------------
1029
# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1030
# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or
1031
# super classes. Setting the tag to NO turns the diagrams off. Note that this
1032
# option is superseded by the HAVE_DOT option below. This is only a fallback. It is
1033
# recommended to install and use dot, since it yields more powerful graphs.
1035
CLASS_DIAGRAMS = YES
1037
# If set to YES, the inheritance and collaboration graphs will hide
1038
# inheritance and usage relations if the target is undocumented
1039
# or is not a class.
1041
HIDE_UNDOC_RELATIONS = NO
1043
# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1044
# available from the path. This tool is part of Graphviz, a graph visualization
1045
# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1046
# have no effect if this option is set to NO (the default)
1050
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1051
# will generate a graph for each documented class showing the direct and
1052
# indirect inheritance relations. Setting this tag to YES will force the
1053
# the CLASS_DIAGRAMS tag to NO.
1057
# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1058
# will generate a graph for each documented class showing the direct and
1059
# indirect implementation dependencies (inheritance, containment, and
1060
# class references variables) of the class with other documented classes.
1062
COLLABORATION_GRAPH = YES
1064
# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1065
# collaboration diagrams in a style similar to the OMG's Unified Modeling
1070
# If set to YES, the inheritance and collaboration graphs will show the
1071
# relations between templates and their instances.
1073
TEMPLATE_RELATIONS = NO
1075
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1076
# tags are set to YES then doxygen will generate a graph for each documented
1077
# file showing the direct and indirect include dependencies of the file with
1078
# other documented files.
1082
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1083
# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1084
# documented header file showing the documented files that directly or
1085
# indirectly include this file.
1087
INCLUDED_BY_GRAPH = YES
1089
# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
1090
# generate a call dependency graph for every global function or class method.
1091
# Note that enabling this option will significantly increase the time of a run.
1092
# So in most cases it will be better to enable call graphs for selected
1093
# functions only using the \callgraph command.
1098
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1099
# will graphical hierarchy of all classes instead of a textual one.
1101
GRAPHICAL_HIERARCHY = YES
1103
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1104
# generated by dot. Possible values are png, jpg, or gif
1105
# If left blank png will be used.
1107
DOT_IMAGE_FORMAT = png
1109
# The tag DOT_PATH can be used to specify the path where the dot tool can be
1110
# found. If left blank, it is assumed the dot tool can be found on the path.
1114
# The DOTFILE_DIRS tag can be used to specify one or more directories that
1115
# contain dot files that are included in the documentation (see the
1116
# \dotfile command).
1120
# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
1121
# (in pixels) of the graphs generated by dot. If a graph becomes larger than
1122
# this value, doxygen will try to truncate the graph, so that it fits within
1123
# the specified constraint. Beware that most browsers cannot cope with very
1126
MAX_DOT_GRAPH_WIDTH = 1024
1128
# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
1129
# (in pixels) of the graphs generated by dot. If a graph becomes larger than
1130
# this value, doxygen will try to truncate the graph, so that it fits within
1131
# the specified constraint. Beware that most browsers cannot cope with very
1134
MAX_DOT_GRAPH_HEIGHT = 1024
1136
# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1137
# graphs generated by dot. A depth value of 3 means that only nodes reachable
1138
# from the root by following a path via at most 3 edges will be shown. Nodes that
1139
# lay further from the root node will be omitted. Note that setting this option to
1140
# 1 or 2 may greatly reduce the computation time needed for large code bases. Also
1141
# note that a graph may be further truncated if the graph's image dimensions are
1142
# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT).
1143
# If 0 is used for the depth value (the default), the graph is not depth-constrained.
1145
MAX_DOT_GRAPH_DEPTH = 0
1147
# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1148
# generate a legend page explaining the meaning of the various boxes and
1149
# arrows in the dot generated graphs.
1151
GENERATE_LEGEND = YES
1153
# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1154
# remove the intermediate dot files that are used to generate
1155
# the various graphs.
1159
#---------------------------------------------------------------------------
1160
# Configuration::additions related to the search engine
1161
#---------------------------------------------------------------------------
1163
# The SEARCHENGINE tag specifies whether or not a search engine should be
1164
# used. If set to NO the values of all tags below this one will be ignored.