1
/* example.c -- usage example of the zlib compression library
2
* Copyright (C) 1995-2002 Jean-loup Gailly.
3
* For conditions of distribution and use, see copyright notice in zlib.h
15
extern void exit OF((int));
18
#if defined(VMS) || defined(RISCOS)
19
# define TESTFILE "foo-gz"
21
# define TESTFILE "foo.gz"
24
#define CHECK_ERR(err, msg) { \
26
fprintf(stderr, "%s error: %d\n", msg, err); \
31
const char hello[] = "hello, hello!";
32
/* "hello world" would be more standard, but the repeated "hello"
33
* stresses the compression code better, sorry...
36
const char dictionary[] = "hello";
37
uLong dictId; /* Adler32 value of the dictionary */
39
void test_compress OF((Byte *compr, uLong comprLen,
40
Byte *uncompr, uLong uncomprLen));
41
void test_gzio OF((const char *out, const char *in,
42
Byte *uncompr, int uncomprLen));
43
void test_deflate OF((Byte *compr, uLong comprLen));
44
void test_inflate OF((Byte *compr, uLong comprLen,
45
Byte *uncompr, uLong uncomprLen));
46
void test_large_deflate OF((Byte *compr, uLong comprLen,
47
Byte *uncompr, uLong uncomprLen));
48
void test_large_inflate OF((Byte *compr, uLong comprLen,
49
Byte *uncompr, uLong uncomprLen));
50
void test_flush OF((Byte *compr, uLong *comprLen));
51
void test_sync OF((Byte *compr, uLong comprLen,
52
Byte *uncompr, uLong uncomprLen));
53
void test_dict_deflate OF((Byte *compr, uLong comprLen));
54
void test_dict_inflate OF((Byte *compr, uLong comprLen,
55
Byte *uncompr, uLong uncomprLen));
56
int main OF((int argc, char *argv[]));
58
/* ===========================================================================
59
* Test compress() and uncompress()
61
void test_compress(compr, comprLen, uncompr, uncomprLen)
62
Byte *compr, *uncompr;
63
uLong comprLen, uncomprLen;
66
uLong len = strlen(hello)+1;
68
err = compress(compr, &comprLen, (const Bytef*)hello, len);
69
CHECK_ERR(err, "compress");
71
strcpy((char*)uncompr, "garbage");
73
err = uncompress(uncompr, &uncomprLen, compr, comprLen);
74
CHECK_ERR(err, "uncompress");
76
if (strcmp((char*)uncompr, hello)) {
77
fprintf(stderr, "bad uncompress\n");
80
printf("uncompress(): %s\n", (char *)uncompr);
84
/* ===========================================================================
85
* Test read/write of .gz files
87
void test_gzio(out, in, uncompr, uncomprLen)
88
const char *out; /* compressed output file */
89
const char *in; /* compressed input file */
94
int len = strlen(hello)+1;
98
file = gzopen(out, "wb");
100
fprintf(stderr, "gzopen error\n");
104
if (gzputs(file, "ello") != 4) {
105
fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err));
108
if (gzprintf(file, ", %s!", "hello") != 8) {
109
fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err));
112
gzseek(file, 1L, SEEK_CUR); /* add one zero byte */
115
file = gzopen(in, "rb");
117
fprintf(stderr, "gzopen error\n");
119
strcpy((char*)uncompr, "garbage");
121
uncomprLen = gzread(file, uncompr, (unsigned)uncomprLen);
122
if (uncomprLen != len) {
123
fprintf(stderr, "gzread err: %s\n", gzerror(file, &err));
126
if (strcmp((char*)uncompr, hello)) {
127
fprintf(stderr, "bad gzread: %s\n", (char*)uncompr);
130
printf("gzread(): %s\n", (char *)uncompr);
133
pos = gzseek(file, -8L, SEEK_CUR);
134
if (pos != 6 || gztell(file) != pos) {
135
fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n",
136
(long)pos, (long)gztell(file));
140
if (gzgetc(file) != ' ') {
141
fprintf(stderr, "gzgetc error\n");
145
gzgets(file, (char*)uncompr, uncomprLen);
146
uncomprLen = strlen((char*)uncompr);
147
if (uncomprLen != 6) { /* "hello!" */
148
fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err));
151
if (strcmp((char*)uncompr, hello+7)) {
152
fprintf(stderr, "bad gzgets after gzseek\n");
155
printf("gzgets() after gzseek: %s\n", (char *)uncompr);
161
/* ===========================================================================
162
* Test deflate() with small buffers
164
void test_deflate(compr, comprLen)
168
z_stream c_stream; /* compression stream */
170
int len = strlen(hello)+1;
172
c_stream.zalloc = (alloc_func)0;
173
c_stream.zfree = (free_func)0;
174
c_stream.opaque = (voidpf)0;
176
err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
177
CHECK_ERR(err, "deflateInit");
179
c_stream.next_in = (Bytef*)hello;
180
c_stream.next_out = compr;
182
while (c_stream.total_in != (uLong)len && c_stream.total_out < comprLen) {
183
c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */
184
err = deflate(&c_stream, Z_NO_FLUSH);
185
CHECK_ERR(err, "deflate");
187
/* Finish the stream, still forcing small buffers: */
189
c_stream.avail_out = 1;
190
err = deflate(&c_stream, Z_FINISH);
191
if (err == Z_STREAM_END) break;
192
CHECK_ERR(err, "deflate");
195
err = deflateEnd(&c_stream);
196
CHECK_ERR(err, "deflateEnd");
199
/* ===========================================================================
200
* Test inflate() with small buffers
202
void test_inflate(compr, comprLen, uncompr, uncomprLen)
203
Byte *compr, *uncompr;
204
uLong comprLen, uncomprLen;
207
z_stream d_stream; /* decompression stream */
209
strcpy((char*)uncompr, "garbage");
211
d_stream.zalloc = (alloc_func)0;
212
d_stream.zfree = (free_func)0;
213
d_stream.opaque = (voidpf)0;
215
d_stream.next_in = compr;
216
d_stream.avail_in = 0;
217
d_stream.next_out = uncompr;
219
err = inflateInit(&d_stream);
220
CHECK_ERR(err, "inflateInit");
222
while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) {
223
d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */
224
err = inflate(&d_stream, Z_NO_FLUSH);
225
if (err == Z_STREAM_END) break;
226
CHECK_ERR(err, "inflate");
229
err = inflateEnd(&d_stream);
230
CHECK_ERR(err, "inflateEnd");
232
if (strcmp((char*)uncompr, hello)) {
233
fprintf(stderr, "bad inflate\n");
236
printf("inflate(): %s\n", (char *)uncompr);
240
/* ===========================================================================
241
* Test deflate() with large buffers and dynamic change of compression level
243
void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
244
Byte *compr, *uncompr;
245
uLong comprLen, uncomprLen;
247
z_stream c_stream; /* compression stream */
250
c_stream.zalloc = (alloc_func)0;
251
c_stream.zfree = (free_func)0;
252
c_stream.opaque = (voidpf)0;
254
err = deflateInit(&c_stream, Z_BEST_SPEED);
255
CHECK_ERR(err, "deflateInit");
257
c_stream.next_out = compr;
258
c_stream.avail_out = (uInt)comprLen;
260
/* At this point, uncompr is still mostly zeroes, so it should compress
263
c_stream.next_in = uncompr;
264
c_stream.avail_in = (uInt)uncomprLen;
265
err = deflate(&c_stream, Z_NO_FLUSH);
266
CHECK_ERR(err, "deflate");
267
if (c_stream.avail_in != 0) {
268
fprintf(stderr, "deflate not greedy\n");
272
/* Feed in already compressed data and switch to no compression: */
273
deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY);
274
c_stream.next_in = compr;
275
c_stream.avail_in = (uInt)comprLen/2;
276
err = deflate(&c_stream, Z_NO_FLUSH);
277
CHECK_ERR(err, "deflate");
279
/* Switch back to compressing mode: */
280
deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED);
281
c_stream.next_in = uncompr;
282
c_stream.avail_in = (uInt)uncomprLen;
283
err = deflate(&c_stream, Z_NO_FLUSH);
284
CHECK_ERR(err, "deflate");
286
err = deflate(&c_stream, Z_FINISH);
287
if (err != Z_STREAM_END) {
288
fprintf(stderr, "deflate should report Z_STREAM_END\n");
291
err = deflateEnd(&c_stream);
292
CHECK_ERR(err, "deflateEnd");
295
/* ===========================================================================
296
* Test inflate() with large buffers
298
void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
299
Byte *compr, *uncompr;
300
uLong comprLen, uncomprLen;
303
z_stream d_stream; /* decompression stream */
305
strcpy((char*)uncompr, "garbage");
307
d_stream.zalloc = (alloc_func)0;
308
d_stream.zfree = (free_func)0;
309
d_stream.opaque = (voidpf)0;
311
d_stream.next_in = compr;
312
d_stream.avail_in = (uInt)comprLen;
314
err = inflateInit(&d_stream);
315
CHECK_ERR(err, "inflateInit");
318
d_stream.next_out = uncompr; /* discard the output */
319
d_stream.avail_out = (uInt)uncomprLen;
320
err = inflate(&d_stream, Z_NO_FLUSH);
321
if (err == Z_STREAM_END) break;
322
CHECK_ERR(err, "large inflate");
325
err = inflateEnd(&d_stream);
326
CHECK_ERR(err, "inflateEnd");
328
if (d_stream.total_out != 2*uncomprLen + comprLen/2) {
329
fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out);
332
printf("large_inflate(): OK\n");
336
/* ===========================================================================
337
* Test deflate() with full flush
339
void test_flush(compr, comprLen)
343
z_stream c_stream; /* compression stream */
345
int len = strlen(hello)+1;
347
c_stream.zalloc = (alloc_func)0;
348
c_stream.zfree = (free_func)0;
349
c_stream.opaque = (voidpf)0;
351
err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
352
CHECK_ERR(err, "deflateInit");
354
c_stream.next_in = (Bytef*)hello;
355
c_stream.next_out = compr;
356
c_stream.avail_in = 3;
357
c_stream.avail_out = (uInt)*comprLen;
358
err = deflate(&c_stream, Z_FULL_FLUSH);
359
CHECK_ERR(err, "deflate");
361
compr[3]++; /* force an error in first compressed block */
362
c_stream.avail_in = len - 3;
364
err = deflate(&c_stream, Z_FINISH);
365
if (err != Z_STREAM_END) {
366
CHECK_ERR(err, "deflate");
368
err = deflateEnd(&c_stream);
369
CHECK_ERR(err, "deflateEnd");
371
*comprLen = c_stream.total_out;
374
/* ===========================================================================
377
void test_sync(compr, comprLen, uncompr, uncomprLen)
378
Byte *compr, *uncompr;
379
uLong comprLen, uncomprLen;
382
z_stream d_stream; /* decompression stream */
384
strcpy((char*)uncompr, "garbage");
386
d_stream.zalloc = (alloc_func)0;
387
d_stream.zfree = (free_func)0;
388
d_stream.opaque = (voidpf)0;
390
d_stream.next_in = compr;
391
d_stream.avail_in = 2; /* just read the zlib header */
393
err = inflateInit(&d_stream);
394
CHECK_ERR(err, "inflateInit");
396
d_stream.next_out = uncompr;
397
d_stream.avail_out = (uInt)uncomprLen;
399
inflate(&d_stream, Z_NO_FLUSH);
400
CHECK_ERR(err, "inflate");
402
d_stream.avail_in = (uInt)comprLen-2; /* read all compressed data */
403
err = inflateSync(&d_stream); /* but skip the damaged part */
404
CHECK_ERR(err, "inflateSync");
406
err = inflate(&d_stream, Z_FINISH);
407
if (err != Z_DATA_ERROR) {
408
fprintf(stderr, "inflate should report DATA_ERROR\n");
409
/* Because of incorrect adler32 */
412
err = inflateEnd(&d_stream);
413
CHECK_ERR(err, "inflateEnd");
415
printf("after inflateSync(): hel%s\n", (char *)uncompr);
418
/* ===========================================================================
419
* Test deflate() with preset dictionary
421
void test_dict_deflate(compr, comprLen)
425
z_stream c_stream; /* compression stream */
428
c_stream.zalloc = (alloc_func)0;
429
c_stream.zfree = (free_func)0;
430
c_stream.opaque = (voidpf)0;
432
err = deflateInit(&c_stream, Z_BEST_COMPRESSION);
433
CHECK_ERR(err, "deflateInit");
435
err = deflateSetDictionary(&c_stream,
436
(const Bytef*)dictionary, sizeof(dictionary));
437
CHECK_ERR(err, "deflateSetDictionary");
439
dictId = c_stream.adler;
440
c_stream.next_out = compr;
441
c_stream.avail_out = (uInt)comprLen;
443
c_stream.next_in = (Bytef*)hello;
444
c_stream.avail_in = (uInt)strlen(hello)+1;
446
err = deflate(&c_stream, Z_FINISH);
447
if (err != Z_STREAM_END) {
448
fprintf(stderr, "deflate should report Z_STREAM_END\n");
451
err = deflateEnd(&c_stream);
452
CHECK_ERR(err, "deflateEnd");
455
/* ===========================================================================
456
* Test inflate() with a preset dictionary
458
void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
459
Byte *compr, *uncompr;
460
uLong comprLen, uncomprLen;
463
z_stream d_stream; /* decompression stream */
465
strcpy((char*)uncompr, "garbage");
467
d_stream.zalloc = (alloc_func)0;
468
d_stream.zfree = (free_func)0;
469
d_stream.opaque = (voidpf)0;
471
d_stream.next_in = compr;
472
d_stream.avail_in = (uInt)comprLen;
474
err = inflateInit(&d_stream);
475
CHECK_ERR(err, "inflateInit");
477
d_stream.next_out = uncompr;
478
d_stream.avail_out = (uInt)uncomprLen;
481
err = inflate(&d_stream, Z_NO_FLUSH);
482
if (err == Z_STREAM_END) break;
483
if (err == Z_NEED_DICT) {
484
if (d_stream.adler != dictId) {
485
fprintf(stderr, "unexpected dictionary");
488
err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary,
491
CHECK_ERR(err, "inflate with dict");
494
err = inflateEnd(&d_stream);
495
CHECK_ERR(err, "inflateEnd");
497
if (strcmp((char*)uncompr, hello)) {
498
fprintf(stderr, "bad inflate with dict\n");
501
printf("inflate with dictionary: %s\n", (char *)uncompr);
505
/* ===========================================================================
506
* Usage: example [output.gz [input.gz]]
513
Byte *compr, *uncompr;
514
uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */
515
uLong uncomprLen = comprLen;
516
static const char* myVersion = ZLIB_VERSION;
518
if (zlibVersion()[0] != myVersion[0]) {
519
fprintf(stderr, "incompatible zlib version\n");
522
} else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) {
523
fprintf(stderr, "warning: different zlib version\n");
526
compr = (Byte*)calloc((uInt)comprLen, 1);
527
uncompr = (Byte*)calloc((uInt)uncomprLen, 1);
528
/* compr and uncompr are cleared to avoid reading uninitialized
529
* data and to ensure that uncompr compresses well.
531
if (compr == Z_NULL || uncompr == Z_NULL) {
532
printf("out of memory\n");
535
test_compress(compr, comprLen, uncompr, uncomprLen);
537
test_gzio((argc > 1 ? argv[1] : TESTFILE),
538
(argc > 2 ? argv[2] : TESTFILE),
539
uncompr, (int)uncomprLen);
541
test_deflate(compr, comprLen);
542
test_inflate(compr, comprLen, uncompr, uncomprLen);
544
test_large_deflate(compr, comprLen, uncompr, uncomprLen);
545
test_large_inflate(compr, comprLen, uncompr, uncomprLen);
547
test_flush(compr, &comprLen);
548
test_sync(compr, comprLen, uncompr, uncomprLen);
549
comprLen = uncomprLen;
551
test_dict_deflate(compr, comprLen);
552
test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
555
return 0; /* to avoid warning */