4
* Copyright (C) 1995-1998, Thomas G. Lane.
5
* This file is part of the Independent JPEG Group's software.
6
* For conditions of distribution and use, see the accompanying README file.
8
* This file contains library routines for transcoding compression,
9
* that is, writing raw DCT coefficient arrays to an output JPEG file.
10
* The routines in jcapimin.c will also be needed by a transcoder.
13
#define JPEG_INTERNALS
18
/* Forward declarations */
19
LOCAL(void) transencode_master_selection
20
JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays));
21
LOCAL(void) transencode_coef_controller
22
JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays));
24
#if defined(__VISAGECPP__)
25
/* Visual Age fixups for multiple declarations */
26
# define start_pass_coef start_pass_coef2 /* already in jccoeft.c */
27
# define compress_output compress_output2 /* already in jccoeft.c */
32
* Compression initialization for writing raw-coefficient data.
33
* Before calling this, all parameters and a data destination must be set up.
34
* Call jpeg_finish_compress() to actually write the data.
36
* The number of passed virtual arrays must match cinfo->num_components.
37
* Note that the virtual arrays need not be filled or even realized at
38
* the time write_coefficients is called; indeed, if the virtual arrays
39
* were requested from this compression object's memory manager, they
40
* typically will be realized during this routine and filled afterwards.
44
jpeg_write_coefficients (j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays)
46
if (cinfo->global_state != CSTATE_START)
47
ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
48
/* Mark all tables to be written */
49
jpeg_suppress_tables(cinfo, FALSE);
50
/* (Re)initialize error mgr and destination modules */
51
(*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
52
(*cinfo->dest->init_destination) (cinfo);
53
/* Perform master selection of active modules */
54
transencode_master_selection(cinfo, coef_arrays);
55
/* Wait for jpeg_finish_compress() call */
56
cinfo->next_scanline = 0; /* so jpeg_write_marker works */
57
cinfo->global_state = CSTATE_WRCOEFS;
62
* Initialize the compression object with default parameters,
63
* then copy from the source object all parameters needed for lossless
64
* transcoding. Parameters that can be varied without loss (such as
65
* scan script and Huffman optimization) are left in their default states.
69
jpeg_copy_critical_parameters (j_decompress_ptr srcinfo,
70
j_compress_ptr dstinfo)
72
JQUANT_TBL ** qtblptr;
73
jpeg_component_info *incomp, *outcomp;
74
JQUANT_TBL *c_quant, *slot_quant;
77
/* Safety check to ensure start_compress not called yet. */
78
if (dstinfo->global_state != CSTATE_START)
79
ERREXIT1(dstinfo, JERR_BAD_STATE, dstinfo->global_state);
80
/* Copy fundamental image dimensions */
81
dstinfo->image_width = srcinfo->image_width;
82
dstinfo->image_height = srcinfo->image_height;
83
dstinfo->input_components = srcinfo->num_components;
84
dstinfo->in_color_space = srcinfo->jpeg_color_space;
85
/* Initialize all parameters to default values */
86
jpeg_set_defaults(dstinfo);
87
/* jpeg_set_defaults may choose wrong colorspace, eg YCbCr if input is RGB.
88
* Fix it to get the right header markers for the image colorspace.
90
jpeg_set_colorspace(dstinfo, srcinfo->jpeg_color_space);
91
dstinfo->data_precision = srcinfo->data_precision;
92
dstinfo->CCIR601_sampling = srcinfo->CCIR601_sampling;
93
/* Copy the source's quantization tables. */
94
for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) {
95
if (srcinfo->quant_tbl_ptrs[tblno] != NULL) {
96
qtblptr = & dstinfo->quant_tbl_ptrs[tblno];
98
*qtblptr = jpeg_alloc_quant_table((j_common_ptr) dstinfo);
99
MEMCOPY((*qtblptr)->quantval,
100
srcinfo->quant_tbl_ptrs[tblno]->quantval,
101
SIZEOF((*qtblptr)->quantval));
102
(*qtblptr)->sent_table = FALSE;
105
/* Copy the source's per-component info.
106
* Note we assume jpeg_set_defaults has allocated the dest comp_info array.
108
dstinfo->num_components = srcinfo->num_components;
109
if (dstinfo->num_components < 1 || dstinfo->num_components > MAX_COMPONENTS)
110
ERREXIT2(dstinfo, JERR_COMPONENT_COUNT, dstinfo->num_components,
112
for (ci = 0, incomp = srcinfo->comp_info, outcomp = dstinfo->comp_info;
113
ci < dstinfo->num_components; ci++, incomp++, outcomp++) {
114
outcomp->component_id = incomp->component_id;
115
outcomp->h_samp_factor = incomp->h_samp_factor;
116
outcomp->v_samp_factor = incomp->v_samp_factor;
117
outcomp->quant_tbl_no = incomp->quant_tbl_no;
118
/* Make sure saved quantization table for component matches the qtable
119
* slot. If not, the input file re-used this qtable slot.
120
* IJG encoder currently cannot duplicate this.
122
tblno = outcomp->quant_tbl_no;
123
if (tblno < 0 || tblno >= NUM_QUANT_TBLS ||
124
srcinfo->quant_tbl_ptrs[tblno] == NULL)
125
ERREXIT1(dstinfo, JERR_NO_QUANT_TABLE, tblno);
126
slot_quant = srcinfo->quant_tbl_ptrs[tblno];
127
c_quant = incomp->quant_table;
128
if (c_quant != NULL) {
129
for (coefi = 0; coefi < DCTSIZE2; coefi++) {
130
if (c_quant->quantval[coefi] != slot_quant->quantval[coefi])
131
ERREXIT1(dstinfo, JERR_MISMATCHED_QUANT_TABLE, tblno);
134
/* Note: we do not copy the source's Huffman table assignments;
135
* instead we rely on jpeg_set_colorspace to have made a suitable choice.
138
/* Also copy JFIF version and resolution information, if available.
139
* Strictly speaking this isn't "critical" info, but it's nearly
140
* always appropriate to copy it if available. In particular,
141
* if the application chooses to copy JFIF 1.02 extension markers from
142
* the source file, we need to copy the version to make sure we don't
143
* emit a file that has 1.02 extensions but a claimed version of 1.01.
144
* We will *not*, however, copy version info from mislabeled "2.01" files.
146
if (srcinfo->saw_JFIF_marker) {
147
if (srcinfo->JFIF_major_version == 1) {
148
dstinfo->JFIF_major_version = srcinfo->JFIF_major_version;
149
dstinfo->JFIF_minor_version = srcinfo->JFIF_minor_version;
151
dstinfo->density_unit = srcinfo->density_unit;
152
dstinfo->X_density = srcinfo->X_density;
153
dstinfo->Y_density = srcinfo->Y_density;
159
* Master selection of compression modules for transcoding.
160
* This substitutes for jcinit.c's initialization of the full compressor.
164
transencode_master_selection (j_compress_ptr cinfo,
165
jvirt_barray_ptr * coef_arrays)
167
/* Although we don't actually use input_components for transcoding,
168
* jcmaster.c's initial_setup will complain if input_components is 0.
170
cinfo->input_components = 1;
171
/* Initialize master control (includes parameter checking/processing) */
172
jinit_c_master_control(cinfo, TRUE /* transcode only */);
174
/* Entropy encoding: either Huffman or arithmetic coding. */
175
if (cinfo->arith_code) {
176
ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
178
if (cinfo->progressive_mode) {
179
#ifdef C_PROGRESSIVE_SUPPORTED
180
jinit_phuff_encoder(cinfo);
182
ERREXIT(cinfo, JERR_NOT_COMPILED);
185
jinit_huff_encoder(cinfo);
188
/* We need a special coefficient buffer controller. */
189
transencode_coef_controller(cinfo, coef_arrays);
191
jinit_marker_writer(cinfo);
193
/* We can now tell the memory manager to allocate virtual arrays. */
194
(*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo);
196
/* Write the datastream header (SOI, JFIF) immediately.
197
* Frame and scan headers are postponed till later.
198
* This lets application insert special markers after the SOI.
200
(*cinfo->marker->write_file_header) (cinfo);
205
* The rest of this file is a special implementation of the coefficient
206
* buffer controller. This is similar to jccoefct.c, but it handles only
207
* output from presupplied virtual arrays. Furthermore, we generate any
208
* dummy padding blocks on-the-fly rather than expecting them to be present
212
/* Private buffer controller object */
215
struct jpeg_c_coef_controller pub; /* public fields */
217
JDIMENSION iMCU_row_num; /* iMCU row # within image */
218
JDIMENSION mcu_ctr; /* counts MCUs processed in current row */
219
int MCU_vert_offset; /* counts MCU rows within iMCU row */
220
int MCU_rows_per_iMCU_row; /* number of such rows needed */
222
/* Virtual block array for each component. */
223
jvirt_barray_ptr * whole_image;
225
/* Workspace for constructing dummy blocks at right/bottom edges. */
226
JBLOCKROW dummy_buffer[C_MAX_BLOCKS_IN_MCU];
227
} my_coef_controller;
229
typedef my_coef_controller * my_coef_ptr;
233
start_iMCU_row (j_compress_ptr cinfo)
234
/* Reset within-iMCU-row counters for a new row */
236
my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
238
/* In an interleaved scan, an MCU row is the same as an iMCU row.
239
* In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows.
240
* But at the bottom of the image, process only what's left.
242
if (cinfo->comps_in_scan > 1) {
243
coef->MCU_rows_per_iMCU_row = 1;
245
if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1))
246
coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor;
248
coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height;
252
coef->MCU_vert_offset = 0;
256
* Initialize for a processing pass.
260
start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
262
my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
264
if (pass_mode != JBUF_CRANK_DEST)
265
ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
267
coef->iMCU_row_num = 0;
268
start_iMCU_row(cinfo);
274
* We process the equivalent of one fully interleaved MCU row ("iMCU" row)
275
* per call, ie, v_samp_factor block rows for each component in the scan.
276
* The data is obtained from the virtual arrays and fed to the entropy coder.
277
* Returns TRUE if the iMCU row is completed, FALSE if suspended.
279
* NB: input_buf is ignored; it is likely to be a NULL pointer.
282
METHODDEF(wxjpeg_boolean)
283
compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
285
my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
286
JDIMENSION MCU_col_num; /* index of current MCU within row */
287
JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1;
288
JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
289
int blkn, ci, xindex, yindex, yoffset, blockcnt;
290
JDIMENSION start_col;
291
JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN];
292
JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU];
293
JBLOCKROW buffer_ptr;
294
jpeg_component_info *compptr;
296
/* Align the virtual buffers for the components used in this scan. */
297
for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
298
compptr = cinfo->cur_comp_info[ci];
299
buffer[ci] = (*cinfo->mem->access_virt_barray)
300
((j_common_ptr) cinfo, coef->whole_image[compptr->component_index],
301
coef->iMCU_row_num * compptr->v_samp_factor,
302
(JDIMENSION) compptr->v_samp_factor, FALSE);
305
/* Loop to process one whole iMCU row */
306
for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
308
for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row;
310
/* Construct list of pointers to DCT blocks belonging to this MCU */
311
blkn = 0; /* index of current DCT block within MCU */
312
for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
313
compptr = cinfo->cur_comp_info[ci];
314
start_col = MCU_col_num * compptr->MCU_width;
315
blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
316
: compptr->last_col_width;
317
for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
318
if (coef->iMCU_row_num < last_iMCU_row ||
319
yindex+yoffset < compptr->last_row_height) {
320
/* Fill in pointers to real blocks in this row */
321
buffer_ptr = buffer[ci][yindex+yoffset] + start_col;
322
for (xindex = 0; xindex < blockcnt; xindex++)
323
MCU_buffer[blkn++] = buffer_ptr++;
325
/* At bottom of image, need a whole row of dummy blocks */
328
/* Fill in any dummy blocks needed in this row.
329
* Dummy blocks are filled in the same way as in jccoefct.c:
330
* all zeroes in the AC entries, DC entries equal to previous
331
* block's DC value. The init routine has already zeroed the
332
* AC entries, so we need only set the DC entries correctly.
334
for (; xindex < compptr->MCU_width; xindex++) {
335
MCU_buffer[blkn] = coef->dummy_buffer[blkn];
336
MCU_buffer[blkn][0][0] = MCU_buffer[blkn-1][0][0];
341
/* Try to write the MCU. */
342
if (! (*cinfo->entropy->encode_mcu) (cinfo, MCU_buffer)) {
343
/* Suspension forced; update state counters and exit */
344
coef->MCU_vert_offset = yoffset;
345
coef->mcu_ctr = MCU_col_num;
349
/* Completed an MCU row, but perhaps not an iMCU row */
352
/* Completed the iMCU row, advance counters for next one */
353
coef->iMCU_row_num++;
354
start_iMCU_row(cinfo);
360
* Initialize coefficient buffer controller.
362
* Each passed coefficient array must be the right size for that
363
* coefficient: width_in_blocks wide and height_in_blocks high,
364
* with unitheight at least v_samp_factor.
368
transencode_coef_controller (j_compress_ptr cinfo,
369
jvirt_barray_ptr * coef_arrays)
376
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
377
SIZEOF(my_coef_controller));
378
cinfo->coef = (struct jpeg_c_coef_controller *) coef;
379
coef->pub.start_pass = start_pass_coef;
380
coef->pub.compress_data = compress_output;
382
/* Save pointer to virtual arrays */
383
coef->whole_image = coef_arrays;
385
/* Allocate and pre-zero space for dummy DCT blocks. */
387
(*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
388
C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
389
jzero_far((void FAR *) buffer, C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
390
for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) {
391
coef->dummy_buffer[i] = buffer + i;
395
#if defined(__VISAGECPP__)
396
# ifdef start_pass_coef2
397
# undef start_pass_coef2
399
# ifdef compress_output2
400
# undef compress_output2
added
removed
src/jpeg/jctrans.c
