4
* Copyright (C) 1994-1996, Thomas G. Lane.
5
* This file is part of the Independent JPEG Group's software.
6
* For conditions of distribution and use, see the accompanying README file.
8
* This file contains code for merged upsampling/color conversion.
10
* This file combines functions from jdsample.c and jdcolor.c;
11
* read those files first to understand what's going on.
13
* When the chroma components are to be upsampled by simple replication
14
* (ie, box filtering), we can save some work in color conversion by
15
* calculating all the output pixels corresponding to a pair of chroma
16
* samples at one time. In the conversion equations
18
* G = Y + K2 * Cb + K3 * Cr
20
* only the Y term varies among the group of pixels corresponding to a pair
21
* of chroma samples, so the rest of the terms can be calculated just once.
22
* At typical sampling ratios, this eliminates half or three-quarters of the
23
* multiplications needed for color conversion.
25
* This file currently provides implementations for the following cases:
26
* YCbCr => RGB color conversion only.
27
* Sampling ratios of 2h1v or 2h2v.
28
* No scaling needed at upsample time.
29
* Corner-aligned (non-CCIR601) sampling alignment.
30
* Other special cases could be added, but in most applications these are
31
* the only common cases. (For uncommon cases we fall back on the more
32
* general code in jdsample.c and jdcolor.c.)
35
#define JPEG_INTERNALS
39
#ifdef UPSAMPLE_MERGING_SUPPORTED
42
/* Private subobject */
45
struct jpeg_upsampler pub; /* public fields */
47
/* Pointer to routine to do actual upsampling/conversion of one row group */
48
JMETHOD(void, upmethod, (j_decompress_ptr cinfo,
49
JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
50
JSAMPARRAY output_buf));
52
/* Private state for YCC->RGB conversion */
53
int * Cr_r_tab; /* => table for Cr to R conversion */
54
int * Cb_b_tab; /* => table for Cb to B conversion */
55
JPEG_INT32 * Cr_g_tab; /* => table for Cr to G conversion */
56
JPEG_INT32 * Cb_g_tab; /* => table for Cb to G conversion */
58
/* For 2:1 vertical sampling, we produce two output rows at a time.
59
* We need a "spare" row buffer to hold the second output row if the
60
* application provides just a one-row buffer; we also use the spare
61
* to discard the dummy last row if the image height is odd.
64
wxjpeg_boolean spare_full; /* T if spare buffer is occupied */
66
JDIMENSION out_row_width; /* samples per output row */
67
JDIMENSION rows_to_go; /* counts rows remaining in image */
70
typedef my_upsampler * my_upsample_ptr;
72
#define SCALEBITS 16 /* speediest right-shift on some machines */
73
#define ONE_HALF ((JPEG_INT32) 1 << (SCALEBITS-1))
74
#define FIX(x) ((JPEG_INT32) ((x) * (1L<<SCALEBITS) + 0.5))
78
* Initialize tables for YCC->RGB colorspace conversion.
79
* This is taken directly from jdcolor.c; see that file for more info.
83
build_ycc_rgb_table (j_decompress_ptr cinfo)
85
my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
90
upsample->Cr_r_tab = (int *)
91
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
92
(MAXJSAMPLE+1) * SIZEOF(int));
93
upsample->Cb_b_tab = (int *)
94
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
95
(MAXJSAMPLE+1) * SIZEOF(int));
96
upsample->Cr_g_tab = (JPEG_INT32 *)
97
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
98
(MAXJSAMPLE+1) * SIZEOF(JPEG_INT32));
99
upsample->Cb_g_tab = (JPEG_INT32 *)
100
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
101
(MAXJSAMPLE+1) * SIZEOF(JPEG_INT32));
103
for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
104
/* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
105
/* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
106
/* Cr=>R value is nearest int to 1.40200 * x */
107
upsample->Cr_r_tab[i] = (int)
108
RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS);
109
/* Cb=>B value is nearest int to 1.77200 * x */
110
upsample->Cb_b_tab[i] = (int)
111
RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS);
112
/* Cr=>G value is scaled-up -0.71414 * x */
113
upsample->Cr_g_tab[i] = (- FIX(0.71414)) * x;
114
/* Cb=>G value is scaled-up -0.34414 * x */
115
/* We also add in ONE_HALF so that need not do it in inner loop */
116
upsample->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF;
122
* Initialize for an upsampling pass.
126
start_pass_merged_upsample (j_decompress_ptr cinfo)
128
my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
130
/* Mark the spare buffer empty */
131
upsample->spare_full = FALSE;
132
/* Initialize total-height counter for detecting bottom of image */
133
upsample->rows_to_go = cinfo->output_height;
138
* Control routine to do upsampling (and color conversion).
140
* The control routine just handles the row buffering considerations.
144
merged_2v_upsample (j_decompress_ptr cinfo,
145
JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
146
JDIMENSION in_row_groups_avail,
147
JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
148
JDIMENSION out_rows_avail)
149
/* 2:1 vertical sampling case: may need a spare row. */
151
my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
152
JSAMPROW work_ptrs[2];
153
JDIMENSION num_rows; /* number of rows returned to caller */
155
if (upsample->spare_full) {
156
/* If we have a spare row saved from a previous cycle, just return it. */
157
jcopy_sample_rows(& upsample->spare_row, 0, output_buf + *out_row_ctr, 0,
158
1, upsample->out_row_width);
160
upsample->spare_full = FALSE;
162
/* Figure number of rows to return to caller. */
164
/* Not more than the distance to the end of the image. */
165
if (num_rows > upsample->rows_to_go)
166
num_rows = upsample->rows_to_go;
167
/* And not more than what the client can accept: */
168
out_rows_avail -= *out_row_ctr;
169
if (num_rows > out_rows_avail)
170
num_rows = out_rows_avail;
171
/* Create output pointer array for upsampler. */
172
work_ptrs[0] = output_buf[*out_row_ctr];
174
work_ptrs[1] = output_buf[*out_row_ctr + 1];
176
work_ptrs[1] = upsample->spare_row;
177
upsample->spare_full = TRUE;
179
/* Now do the upsampling. */
180
(*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, work_ptrs);
184
*out_row_ctr += num_rows;
185
upsample->rows_to_go -= num_rows;
186
/* When the buffer is emptied, declare this input row group consumed */
187
if (! upsample->spare_full)
188
(*in_row_group_ctr)++;
193
merged_1v_upsample (j_decompress_ptr cinfo,
194
JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
195
JDIMENSION in_row_groups_avail,
196
JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
197
JDIMENSION out_rows_avail)
198
/* 1:1 vertical sampling case: much easier, never need a spare row. */
200
my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
202
/* Just do the upsampling. */
203
(*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr,
204
output_buf + *out_row_ctr);
207
(*in_row_group_ctr)++;
212
* These are the routines invoked by the control routines to do
213
* the actual upsampling/conversion. One row group is processed per call.
215
* Note: since we may be writing directly into application-supplied buffers,
216
* we have to be honest about the output width; we can't assume the buffer
217
* has been rounded up to an even width.
222
* Upsample and color convert for the case of 2:1 horizontal and 1:1 vertical.
226
h2v1_merged_upsample (j_decompress_ptr cinfo,
227
JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
228
JSAMPARRAY output_buf)
230
my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
231
register int y, cred, cgreen, cblue;
233
register JSAMPROW outptr;
234
JSAMPROW inptr0, inptr1, inptr2;
236
/* copy these pointers into registers if possible */
237
register JSAMPLE * range_limit = cinfo->sample_range_limit;
238
int * Crrtab = upsample->Cr_r_tab;
239
int * Cbbtab = upsample->Cb_b_tab;
240
JPEG_INT32 * Crgtab = upsample->Cr_g_tab;
241
JPEG_INT32 * Cbgtab = upsample->Cb_g_tab;
244
inptr0 = input_buf[0][in_row_group_ctr];
245
inptr1 = input_buf[1][in_row_group_ctr];
246
inptr2 = input_buf[2][in_row_group_ctr];
247
outptr = output_buf[0];
248
/* Loop for each pair of output pixels */
249
for (col = cinfo->output_width >> 1; col > 0; col--) {
250
/* Do the chroma part of the calculation */
251
cb = GETJSAMPLE(*inptr1++);
252
cr = GETJSAMPLE(*inptr2++);
254
cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
256
/* Fetch 2 Y values and emit 2 pixels */
257
y = GETJSAMPLE(*inptr0++);
258
outptr[RGB_RED] = range_limit[y + cred];
259
outptr[RGB_GREEN] = range_limit[y + cgreen];
260
outptr[RGB_BLUE] = range_limit[y + cblue];
261
outptr += RGB_PIXELSIZE;
262
y = GETJSAMPLE(*inptr0++);
263
outptr[RGB_RED] = range_limit[y + cred];
264
outptr[RGB_GREEN] = range_limit[y + cgreen];
265
outptr[RGB_BLUE] = range_limit[y + cblue];
266
outptr += RGB_PIXELSIZE;
268
/* If image width is odd, do the last output column separately */
269
if (cinfo->output_width & 1) {
270
cb = GETJSAMPLE(*inptr1);
271
cr = GETJSAMPLE(*inptr2);
273
cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
275
y = GETJSAMPLE(*inptr0);
276
outptr[RGB_RED] = range_limit[y + cred];
277
outptr[RGB_GREEN] = range_limit[y + cgreen];
278
outptr[RGB_BLUE] = range_limit[y + cblue];
283
* Upsample and color convert for the case of 2:1 horizontal and 2:1 vertical.
287
h2v2_merged_upsample (j_decompress_ptr cinfo,
288
JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
289
JSAMPARRAY output_buf)
291
my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
292
register int y, cred, cgreen, cblue;
294
register JSAMPROW outptr0, outptr1;
295
JSAMPROW inptr00, inptr01, inptr1, inptr2;
297
/* copy these pointers into registers if possible */
298
register JSAMPLE * range_limit = cinfo->sample_range_limit;
299
int * Crrtab = upsample->Cr_r_tab;
300
int * Cbbtab = upsample->Cb_b_tab;
301
JPEG_INT32 * Crgtab = upsample->Cr_g_tab;
302
JPEG_INT32 * Cbgtab = upsample->Cb_g_tab;
305
inptr00 = input_buf[0][in_row_group_ctr*2];
306
inptr01 = input_buf[0][in_row_group_ctr*2 + 1];
307
inptr1 = input_buf[1][in_row_group_ctr];
308
inptr2 = input_buf[2][in_row_group_ctr];
309
outptr0 = output_buf[0];
310
outptr1 = output_buf[1];
311
/* Loop for each group of output pixels */
312
for (col = cinfo->output_width >> 1; col > 0; col--) {
313
/* Do the chroma part of the calculation */
314
cb = GETJSAMPLE(*inptr1++);
315
cr = GETJSAMPLE(*inptr2++);
317
cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
319
/* Fetch 4 Y values and emit 4 pixels */
320
y = GETJSAMPLE(*inptr00++);
321
outptr0[RGB_RED] = range_limit[y + cred];
322
outptr0[RGB_GREEN] = range_limit[y + cgreen];
323
outptr0[RGB_BLUE] = range_limit[y + cblue];
324
outptr0 += RGB_PIXELSIZE;
325
y = GETJSAMPLE(*inptr00++);
326
outptr0[RGB_RED] = range_limit[y + cred];
327
outptr0[RGB_GREEN] = range_limit[y + cgreen];
328
outptr0[RGB_BLUE] = range_limit[y + cblue];
329
outptr0 += RGB_PIXELSIZE;
330
y = GETJSAMPLE(*inptr01++);
331
outptr1[RGB_RED] = range_limit[y + cred];
332
outptr1[RGB_GREEN] = range_limit[y + cgreen];
333
outptr1[RGB_BLUE] = range_limit[y + cblue];
334
outptr1 += RGB_PIXELSIZE;
335
y = GETJSAMPLE(*inptr01++);
336
outptr1[RGB_RED] = range_limit[y + cred];
337
outptr1[RGB_GREEN] = range_limit[y + cgreen];
338
outptr1[RGB_BLUE] = range_limit[y + cblue];
339
outptr1 += RGB_PIXELSIZE;
341
/* If image width is odd, do the last output column separately */
342
if (cinfo->output_width & 1) {
343
cb = GETJSAMPLE(*inptr1);
344
cr = GETJSAMPLE(*inptr2);
346
cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
348
y = GETJSAMPLE(*inptr00);
349
outptr0[RGB_RED] = range_limit[y + cred];
350
outptr0[RGB_GREEN] = range_limit[y + cgreen];
351
outptr0[RGB_BLUE] = range_limit[y + cblue];
352
y = GETJSAMPLE(*inptr01);
353
outptr1[RGB_RED] = range_limit[y + cred];
354
outptr1[RGB_GREEN] = range_limit[y + cgreen];
355
outptr1[RGB_BLUE] = range_limit[y + cblue];
361
* Module initialization routine for merged upsampling/color conversion.
363
* NB: this is called under the conditions determined by use_merged_upsample()
364
* in jdmaster.c. That routine MUST correspond to the actual capabilities
365
* of this module; no safety checks are made here.
369
jinit_merged_upsampler (j_decompress_ptr cinfo)
371
my_upsample_ptr upsample;
373
upsample = (my_upsample_ptr)
374
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
375
SIZEOF(my_upsampler));
376
cinfo->upsample = (struct jpeg_upsampler *) upsample;
377
upsample->pub.start_pass = start_pass_merged_upsample;
378
upsample->pub.need_context_rows = FALSE;
380
upsample->out_row_width = cinfo->output_width * cinfo->out_color_components;
382
if (cinfo->max_v_samp_factor == 2) {
383
upsample->pub.upsample = merged_2v_upsample;
384
upsample->upmethod = h2v2_merged_upsample;
385
/* Allocate a spare row buffer */
386
upsample->spare_row = (JSAMPROW)
387
(*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
388
(size_t) (upsample->out_row_width * SIZEOF(JSAMPLE)));
390
upsample->pub.upsample = merged_1v_upsample;
391
upsample->upmethod = h2v1_merged_upsample;
392
/* No spare row needed */
393
upsample->spare_row = NULL;
396
build_ycc_rgb_table(cinfo);
399
#endif /* UPSAMPLE_MERGING_SUPPORTED */
added
removed
src/jpeg/jdmerge.c
