2
* pm.h - Power management interface
4
* Copyright (C) 2000 Andrew Henroid
6
* This program is free software; you can redistribute it and/or modify
7
* it under the terms of the GNU General Public License as published by
8
* the Free Software Foundation; either version 2 of the License, or
9
* (at your option) any later version.
11
* This program is distributed in the hope that it will be useful,
12
* but WITHOUT ANY WARRANTY; without even the implied warranty of
13
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14
* GNU General Public License for more details.
16
* You should have received a copy of the GNU General Public License
17
* along with this program; if not, write to the Free Software
18
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
26
#include <linux/list.h>
27
#include <asm/atomic.h>
30
* Power management requests... these are passed to pm_send_all() and friends.
32
* these functions are old and deprecated, see below.
34
typedef int __bitwise pm_request_t;
36
#define PM_SUSPEND ((__force pm_request_t) 1) /* enter D1-D3 */
37
#define PM_RESUME ((__force pm_request_t) 2) /* enter D0 */
41
* Device types... these are passed to pm_register
43
typedef int __bitwise pm_dev_t;
45
#define PM_UNKNOWN_DEV ((__force pm_dev_t) 0) /* generic */
46
#define PM_SYS_DEV ((__force pm_dev_t) 1) /* system device (fan, KB controller, ...) */
47
#define PM_PCI_DEV ((__force pm_dev_t) 2) /* PCI device */
48
#define PM_USB_DEV ((__force pm_dev_t) 3) /* USB device */
49
#define PM_SCSI_DEV ((__force pm_dev_t) 4) /* SCSI device */
50
#define PM_ISA_DEV ((__force pm_dev_t) 5) /* ISA device */
51
#define PM_MTD_DEV ((__force pm_dev_t) 6) /* Memory Technology Device */
54
* System device hardware ID (PnP) values
58
PM_SYS_UNKNOWN = 0x00000000, /* generic */
59
PM_SYS_KBC = 0x41d00303, /* keyboard controller */
60
PM_SYS_COM = 0x41d00500, /* serial port */
61
PM_SYS_IRDA = 0x41d00510, /* IRDA controller */
62
PM_SYS_FDC = 0x41d00700, /* floppy controller */
63
PM_SYS_VGA = 0x41d00900, /* VGA controller */
64
PM_SYS_PCMCIA = 0x41d00e00, /* PCMCIA controller */
70
#define PM_PCI_ID(dev) ((dev)->bus->number << 16 | (dev)->devfn)
73
* Request handler callback
77
typedef int (*pm_callback)(struct pm_dev *dev, pm_request_t rqst, void *data);
80
* Dynamic device information
91
unsigned long prev_state;
93
struct list_head entry;
96
/* Functions above this comment are list-based old-style power
97
* managment. Please avoid using them. */
100
* Callbacks for platform drivers to implement.
102
extern void (*pm_idle)(void);
103
extern void (*pm_power_off)(void);
105
typedef int __bitwise suspend_state_t;
107
#define PM_SUSPEND_ON ((__force suspend_state_t) 0)
108
#define PM_SUSPEND_STANDBY ((__force suspend_state_t) 1)
109
#define PM_SUSPEND_MEM ((__force suspend_state_t) 3)
110
#define PM_SUSPEND_DISK ((__force suspend_state_t) 4)
111
#define PM_SUSPEND_MAX ((__force suspend_state_t) 5)
113
typedef int __bitwise suspend_disk_method_t;
115
#define PM_DISK_FIRMWARE ((__force suspend_disk_method_t) 1)
116
#define PM_DISK_PLATFORM ((__force suspend_disk_method_t) 2)
117
#define PM_DISK_SHUTDOWN ((__force suspend_disk_method_t) 3)
118
#define PM_DISK_REBOOT ((__force suspend_disk_method_t) 4)
119
#define PM_DISK_TEST ((__force suspend_disk_method_t) 5)
120
#define PM_DISK_TESTPROC ((__force suspend_disk_method_t) 6)
121
#define PM_DISK_MAX ((__force suspend_disk_method_t) 7)
124
suspend_disk_method_t pm_disk_mode;
125
int (*valid)(suspend_state_t state);
126
int (*prepare)(suspend_state_t state);
127
int (*enter)(suspend_state_t state);
128
int (*finish)(suspend_state_t state);
131
extern void pm_set_ops(struct pm_ops *);
132
extern struct pm_ops *pm_ops;
133
extern int pm_suspend(suspend_state_t state);
137
* Device power management
142
typedef struct pm_message {
147
* Several driver power state transitions are externally visible, affecting
148
* the state of pending I/O queues and (for drivers that touch hardware)
149
* interrupts, wakeups, DMA, and other hardware state. There may also be
150
* internal transitions to various low power modes, which are transparent
151
* to the rest of the driver stack (such as a driver that's ON gating off
152
* clocks which are not in active use).
154
* One transition is triggered by resume(), after a suspend() call; the
155
* message is implicit:
157
* ON Driver starts working again, responding to hardware events
158
* and software requests. The hardware may have gone through
159
* a power-off reset, or it may have maintained state from the
160
* previous suspend() which the driver will rely on while
161
* resuming. On most platforms, there are no restrictions on
162
* availability of resources like clocks during resume().
164
* Other transitions are triggered by messages sent using suspend(). All
165
* these transitions quiesce the driver, so that I/O queues are inactive.
166
* That commonly entails turning off IRQs and DMA; there may be rules
167
* about how to quiesce that are specific to the bus or the device's type.
168
* (For example, network drivers mark the link state.) Other details may
169
* differ according to the message:
171
* SUSPEND Quiesce, enter a low power device state appropriate for
172
* the upcoming system state (such as PCI_D3hot), and enable
173
* wakeup events as appropriate.
175
* FREEZE Quiesce operations so that a consistent image can be saved;
176
* but do NOT otherwise enter a low power device state, and do
177
* NOT emit system wakeup events.
179
* PRETHAW Quiesce as if for FREEZE; additionally, prepare for restoring
180
* the system from a snapshot taken after an earlier FREEZE.
181
* Some drivers will need to reset their hardware state instead
182
* of preserving it, to ensure that it's never mistaken for the
183
* state which that earlier snapshot had set up.
185
* A minimally power-aware driver treats all messages as SUSPEND, fully
186
* reinitializes its device during resume() -- whether or not it was reset
187
* during the suspend/resume cycle -- and can't issue wakeup events.
189
* More power-aware drivers may also use low power states at runtime as
190
* well as during system sleep states like PM_SUSPEND_STANDBY. They may
191
* be able to use wakeup events to exit from runtime low-power states,
192
* or from system low-power states such as standby or suspend-to-RAM.
195
#define PM_EVENT_ON 0
196
#define PM_EVENT_FREEZE 1
197
#define PM_EVENT_SUSPEND 2
198
#define PM_EVENT_PRETHAW 3
200
#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, })
201
#define PMSG_PRETHAW ((struct pm_message){ .event = PM_EVENT_PRETHAW, })
202
#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, })
203
#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, })
206
pm_message_t power_state;
207
unsigned can_wakeup:1;
209
unsigned should_wakeup:1;
210
pm_message_t prev_state;
212
struct device * pm_parent;
213
struct list_head entry;
217
extern void device_pm_set_parent(struct device * dev, struct device * parent);
219
extern int device_power_down(pm_message_t state);
220
extern void device_power_up(void);
221
extern void device_resume(void);
224
extern suspend_disk_method_t pm_disk_mode;
226
extern int device_suspend(pm_message_t state);
227
extern int device_prepare_suspend(pm_message_t state);
229
#define device_set_wakeup_enable(dev,val) \
230
((dev)->power.should_wakeup = !!(val))
231
#define device_may_wakeup(dev) \
232
(device_can_wakeup(dev) && (dev)->power.should_wakeup)
234
extern int dpm_runtime_suspend(struct device *, pm_message_t);
235
extern void dpm_runtime_resume(struct device *);
236
extern void __suspend_report_result(const char *function, void *fn, int ret);
238
#define suspend_report_result(fn, ret) \
240
__suspend_report_result(__FUNCTION__, fn, ret); \
243
#else /* !CONFIG_PM */
245
static inline int device_suspend(pm_message_t state)
250
#define device_set_wakeup_enable(dev,val) do{}while(0)
251
#define device_may_wakeup(dev) (0)
253
static inline int dpm_runtime_suspend(struct device * dev, pm_message_t state)
258
static inline void dpm_runtime_resume(struct device * dev)
262
#define suspend_report_result(fn, ret) do { } while (0)
266
/* changes to device_may_wakeup take effect on the next pm state change.
267
* by default, devices should wakeup if they can.
269
#define device_can_wakeup(dev) \
270
((dev)->power.can_wakeup)
271
#define device_init_wakeup(dev,val) \
273
device_can_wakeup(dev) = !!(val); \
274
device_set_wakeup_enable(dev,val); \
277
#endif /* __KERNEL__ */
279
#endif /* _LINUX_PM_H */