1
//===-- LegalizeTypes.h - Definition of the DAG Type Legalizer class ------===//
3
// The LLVM Compiler Infrastructure
5
// This file is distributed under the University of Illinois Open Source
6
// License. See LICENSE.TXT for details.
8
//===----------------------------------------------------------------------===//
10
// This file defines the DAGTypeLegalizer class. This is a private interface
11
// shared between the code that implements the SelectionDAG::LegalizeTypes
14
//===----------------------------------------------------------------------===//
16
#ifndef SELECTIONDAG_LEGALIZETYPES_H
17
#define SELECTIONDAG_LEGALIZETYPES_H
19
#define DEBUG_TYPE "legalize-types"
20
#include "llvm/CodeGen/SelectionDAG.h"
21
#include "llvm/Target/TargetLowering.h"
22
#include "llvm/ADT/DenseMap.h"
23
#include "llvm/ADT/DenseSet.h"
24
#include "llvm/Support/Compiler.h"
25
#include "llvm/Support/Debug.h"
29
//===----------------------------------------------------------------------===//
30
/// DAGTypeLegalizer - This takes an arbitrary SelectionDAG as input and hacks
31
/// on it until only value types the target machine can handle are left. This
32
/// involves promoting small sizes to large sizes or splitting up large values
33
/// into small values.
35
class VISIBILITY_HIDDEN DAGTypeLegalizer {
39
// NodeIdFlags - This pass uses the NodeId on the SDNodes to hold information
40
// about the state of the node. The enum has all the values.
42
/// ReadyToProcess - All operands have been processed, so this node is ready
46
/// NewNode - This is a new node, not before seen, that was created in the
47
/// process of legalizing some other node.
50
/// Unanalyzed - This node's ID needs to be set to the number of its
51
/// unprocessed operands.
54
/// Processed - This is a node that has already been processed.
57
// 1+ - This is a node which has this many unprocessed operands.
61
Legal, // The target natively supports this type.
62
PromoteInteger, // Replace this integer type with a larger one.
63
ExpandInteger, // Split this integer type into two of half the size.
64
SoftenFloat, // Convert this float type to a same size integer type.
65
ExpandFloat, // Split this float type into two of half the size.
66
ScalarizeVector, // Replace this one-element vector with its element type.
67
SplitVector, // Split this vector type into two of half the size.
68
WidenVector // This vector type should be widened into a larger vector.
71
/// ValueTypeActions - This is a bitvector that contains two bits for each
72
/// simple value type, where the two bits correspond to the LegalizeAction
73
/// enum from TargetLowering. This can be queried with "getTypeAction(VT)".
74
TargetLowering::ValueTypeActionImpl ValueTypeActions;
76
/// getTypeAction - Return how we should legalize values of this type.
77
LegalizeAction getTypeAction(EVT VT) const {
78
switch (ValueTypeActions.getTypeAction(*DAG.getContext(), VT)) {
80
assert(false && "Unknown legalize action!");
81
case TargetLowering::Legal:
83
case TargetLowering::Promote:
85
// 1) For integers, use a larger integer type (e.g. i8 -> i32).
86
// 2) For vectors, use a wider vector type (e.g. v3i32 -> v4i32).
88
return PromoteInteger;
91
case TargetLowering::Expand:
93
// 1) split scalar in half, 2) convert a float to an integer,
94
// 3) scalarize a single-element vector, 4) split a vector in two.
98
else if (VT.getSizeInBits() ==
99
TLI.getTypeToTransformTo(*DAG.getContext(), VT).getSizeInBits())
103
} else if (VT.getVectorNumElements() == 1) {
104
return ScalarizeVector;
111
/// isTypeLegal - Return true if this type is legal on this target.
112
bool isTypeLegal(EVT VT) const {
113
return (ValueTypeActions.getTypeAction(*DAG.getContext(), VT) ==
114
TargetLowering::Legal);
117
/// IgnoreNodeResults - Pretend all of this node's results are legal.
118
bool IgnoreNodeResults(SDNode *N) const {
119
return N->getOpcode() == ISD::TargetConstant;
122
/// PromotedIntegers - For integer nodes that are below legal width, this map
123
/// indicates what promoted value to use.
124
DenseMap<SDValue, SDValue> PromotedIntegers;
126
/// ExpandedIntegers - For integer nodes that need to be expanded this map
127
/// indicates which operands are the expanded version of the input.
128
DenseMap<SDValue, std::pair<SDValue, SDValue> > ExpandedIntegers;
130
/// SoftenedFloats - For floating point nodes converted to integers of
131
/// the same size, this map indicates the converted value to use.
132
DenseMap<SDValue, SDValue> SoftenedFloats;
134
/// ExpandedFloats - For float nodes that need to be expanded this map
135
/// indicates which operands are the expanded version of the input.
136
DenseMap<SDValue, std::pair<SDValue, SDValue> > ExpandedFloats;
138
/// ScalarizedVectors - For nodes that are <1 x ty>, this map indicates the
139
/// scalar value of type 'ty' to use.
140
DenseMap<SDValue, SDValue> ScalarizedVectors;
142
/// SplitVectors - For nodes that need to be split this map indicates
143
/// which operands are the expanded version of the input.
144
DenseMap<SDValue, std::pair<SDValue, SDValue> > SplitVectors;
146
/// WidenedVectors - For vector nodes that need to be widened, indicates
147
/// the widened value to use.
148
DenseMap<SDValue, SDValue> WidenedVectors;
150
/// ReplacedValues - For values that have been replaced with another,
151
/// indicates the replacement value to use.
152
DenseMap<SDValue, SDValue> ReplacedValues;
154
/// Worklist - This defines a worklist of nodes to process. In order to be
155
/// pushed onto this worklist, all operands of a node must have already been
157
SmallVector<SDNode*, 128> Worklist;
160
explicit DAGTypeLegalizer(SelectionDAG &dag)
161
: TLI(dag.getTargetLoweringInfo()), DAG(dag),
162
ValueTypeActions(TLI.getValueTypeActions()) {
163
assert(MVT::LAST_VALUETYPE <= MVT::MAX_ALLOWED_VALUETYPE &&
164
"Too many value types for ValueTypeActions to hold!");
167
/// run - This is the main entry point for the type legalizer. This does a
168
/// top-down traversal of the dag, legalizing types as it goes. Returns
169
/// "true" if it made any changes.
172
void NoteDeletion(SDNode *Old, SDNode *New) {
175
for (unsigned i = 0, e = Old->getNumValues(); i != e; ++i)
176
ReplacedValues[SDValue(Old, i)] = SDValue(New, i);
180
SDNode *AnalyzeNewNode(SDNode *N);
181
void AnalyzeNewValue(SDValue &Val);
182
void ExpungeNode(SDNode *N);
183
void PerformExpensiveChecks();
184
void RemapValue(SDValue &N);
187
SDValue BitConvertToInteger(SDValue Op);
188
SDValue BitConvertVectorToIntegerVector(SDValue Op);
189
SDValue CreateStackStoreLoad(SDValue Op, EVT DestVT);
190
bool CustomLowerNode(SDNode *N, EVT VT, bool LegalizeResult);
191
bool CustomWidenLowerNode(SDNode *N, EVT VT);
192
SDValue GetVectorElementPointer(SDValue VecPtr, EVT EltVT, SDValue Index);
193
SDValue JoinIntegers(SDValue Lo, SDValue Hi);
194
SDValue LibCallify(RTLIB::Libcall LC, SDNode *N, bool isSigned);
195
SDValue MakeLibCall(RTLIB::Libcall LC, EVT RetVT,
196
const SDValue *Ops, unsigned NumOps, bool isSigned,
198
SDValue PromoteTargetBoolean(SDValue Bool, EVT VT);
199
void ReplaceValueWith(SDValue From, SDValue To);
200
void SplitInteger(SDValue Op, SDValue &Lo, SDValue &Hi);
201
void SplitInteger(SDValue Op, EVT LoVT, EVT HiVT,
202
SDValue &Lo, SDValue &Hi);
204
//===--------------------------------------------------------------------===//
205
// Integer Promotion Support: LegalizeIntegerTypes.cpp
206
//===--------------------------------------------------------------------===//
208
/// GetPromotedInteger - Given a processed operand Op which was promoted to a
209
/// larger integer type, this returns the promoted value. The low bits of the
210
/// promoted value corresponding to the original type are exactly equal to Op.
211
/// The extra bits contain rubbish, so the promoted value may need to be zero-
212
/// or sign-extended from the original type before it is usable (the helpers
213
/// SExtPromotedInteger and ZExtPromotedInteger can do this for you).
214
/// For example, if Op is an i16 and was promoted to an i32, then this method
215
/// returns an i32, the lower 16 bits of which coincide with Op, and the upper
216
/// 16 bits of which contain rubbish.
217
SDValue GetPromotedInteger(SDValue Op) {
218
SDValue &PromotedOp = PromotedIntegers[Op];
219
RemapValue(PromotedOp);
220
assert(PromotedOp.getNode() && "Operand wasn't promoted?");
223
void SetPromotedInteger(SDValue Op, SDValue Result);
225
/// SExtPromotedInteger - Get a promoted operand and sign extend it to the
227
SDValue SExtPromotedInteger(SDValue Op) {
228
EVT OldVT = Op.getValueType();
229
DebugLoc dl = Op.getDebugLoc();
230
Op = GetPromotedInteger(Op);
231
return DAG.getNode(ISD::SIGN_EXTEND_INREG, dl, Op.getValueType(), Op,
232
DAG.getValueType(OldVT));
235
/// ZExtPromotedInteger - Get a promoted operand and zero extend it to the
237
SDValue ZExtPromotedInteger(SDValue Op) {
238
EVT OldVT = Op.getValueType();
239
DebugLoc dl = Op.getDebugLoc();
240
Op = GetPromotedInteger(Op);
241
return DAG.getZeroExtendInReg(Op, dl, OldVT);
244
// Integer Result Promotion.
245
void PromoteIntegerResult(SDNode *N, unsigned ResNo);
246
SDValue PromoteIntRes_AssertSext(SDNode *N);
247
SDValue PromoteIntRes_AssertZext(SDNode *N);
248
SDValue PromoteIntRes_Atomic1(AtomicSDNode *N);
249
SDValue PromoteIntRes_Atomic2(AtomicSDNode *N);
250
SDValue PromoteIntRes_BIT_CONVERT(SDNode *N);
251
SDValue PromoteIntRes_BSWAP(SDNode *N);
252
SDValue PromoteIntRes_BUILD_PAIR(SDNode *N);
253
SDValue PromoteIntRes_Constant(SDNode *N);
254
SDValue PromoteIntRes_CONVERT_RNDSAT(SDNode *N);
255
SDValue PromoteIntRes_CTLZ(SDNode *N);
256
SDValue PromoteIntRes_CTPOP(SDNode *N);
257
SDValue PromoteIntRes_CTTZ(SDNode *N);
258
SDValue PromoteIntRes_EXTRACT_VECTOR_ELT(SDNode *N);
259
SDValue PromoteIntRes_FP_TO_XINT(SDNode *N);
260
SDValue PromoteIntRes_INT_EXTEND(SDNode *N);
261
SDValue PromoteIntRes_LOAD(LoadSDNode *N);
262
SDValue PromoteIntRes_Overflow(SDNode *N);
263
SDValue PromoteIntRes_SADDSUBO(SDNode *N, unsigned ResNo);
264
SDValue PromoteIntRes_SDIV(SDNode *N);
265
SDValue PromoteIntRes_SELECT(SDNode *N);
266
SDValue PromoteIntRes_SELECT_CC(SDNode *N);
267
SDValue PromoteIntRes_SETCC(SDNode *N);
268
SDValue PromoteIntRes_SHL(SDNode *N);
269
SDValue PromoteIntRes_SimpleIntBinOp(SDNode *N);
270
SDValue PromoteIntRes_SIGN_EXTEND_INREG(SDNode *N);
271
SDValue PromoteIntRes_SRA(SDNode *N);
272
SDValue PromoteIntRes_SRL(SDNode *N);
273
SDValue PromoteIntRes_TRUNCATE(SDNode *N);
274
SDValue PromoteIntRes_UADDSUBO(SDNode *N, unsigned ResNo);
275
SDValue PromoteIntRes_UDIV(SDNode *N);
276
SDValue PromoteIntRes_UNDEF(SDNode *N);
277
SDValue PromoteIntRes_VAARG(SDNode *N);
278
SDValue PromoteIntRes_XMULO(SDNode *N, unsigned ResNo);
280
// Integer Operand Promotion.
281
bool PromoteIntegerOperand(SDNode *N, unsigned OperandNo);
282
SDValue PromoteIntOp_ANY_EXTEND(SDNode *N);
283
SDValue PromoteIntOp_BIT_CONVERT(SDNode *N);
284
SDValue PromoteIntOp_BUILD_PAIR(SDNode *N);
285
SDValue PromoteIntOp_BR_CC(SDNode *N, unsigned OpNo);
286
SDValue PromoteIntOp_BRCOND(SDNode *N, unsigned OpNo);
287
SDValue PromoteIntOp_BUILD_VECTOR(SDNode *N);
288
SDValue PromoteIntOp_CONVERT_RNDSAT(SDNode *N);
289
SDValue PromoteIntOp_INSERT_VECTOR_ELT(SDNode *N, unsigned OpNo);
290
SDValue PromoteIntOp_MEMBARRIER(SDNode *N);
291
SDValue PromoteIntOp_SCALAR_TO_VECTOR(SDNode *N);
292
SDValue PromoteIntOp_SELECT(SDNode *N, unsigned OpNo);
293
SDValue PromoteIntOp_SELECT_CC(SDNode *N, unsigned OpNo);
294
SDValue PromoteIntOp_SETCC(SDNode *N, unsigned OpNo);
295
SDValue PromoteIntOp_Shift(SDNode *N);
296
SDValue PromoteIntOp_SIGN_EXTEND(SDNode *N);
297
SDValue PromoteIntOp_SINT_TO_FP(SDNode *N);
298
SDValue PromoteIntOp_STORE(StoreSDNode *N, unsigned OpNo);
299
SDValue PromoteIntOp_TRUNCATE(SDNode *N);
300
SDValue PromoteIntOp_UINT_TO_FP(SDNode *N);
301
SDValue PromoteIntOp_ZERO_EXTEND(SDNode *N);
303
void PromoteSetCCOperands(SDValue &LHS,SDValue &RHS, ISD::CondCode Code);
305
//===--------------------------------------------------------------------===//
306
// Integer Expansion Support: LegalizeIntegerTypes.cpp
307
//===--------------------------------------------------------------------===//
309
/// GetExpandedInteger - Given a processed operand Op which was expanded into
310
/// two integers of half the size, this returns the two halves. The low bits
311
/// of Op are exactly equal to the bits of Lo; the high bits exactly equal Hi.
312
/// For example, if Op is an i64 which was expanded into two i32's, then this
313
/// method returns the two i32's, with Lo being equal to the lower 32 bits of
314
/// Op, and Hi being equal to the upper 32 bits.
315
void GetExpandedInteger(SDValue Op, SDValue &Lo, SDValue &Hi);
316
void SetExpandedInteger(SDValue Op, SDValue Lo, SDValue Hi);
318
// Integer Result Expansion.
319
void ExpandIntegerResult(SDNode *N, unsigned ResNo);
320
void ExpandIntRes_ANY_EXTEND (SDNode *N, SDValue &Lo, SDValue &Hi);
321
void ExpandIntRes_AssertSext (SDNode *N, SDValue &Lo, SDValue &Hi);
322
void ExpandIntRes_AssertZext (SDNode *N, SDValue &Lo, SDValue &Hi);
323
void ExpandIntRes_Constant (SDNode *N, SDValue &Lo, SDValue &Hi);
324
void ExpandIntRes_CTLZ (SDNode *N, SDValue &Lo, SDValue &Hi);
325
void ExpandIntRes_CTPOP (SDNode *N, SDValue &Lo, SDValue &Hi);
326
void ExpandIntRes_CTTZ (SDNode *N, SDValue &Lo, SDValue &Hi);
327
void ExpandIntRes_LOAD (LoadSDNode *N, SDValue &Lo, SDValue &Hi);
328
void ExpandIntRes_SIGN_EXTEND (SDNode *N, SDValue &Lo, SDValue &Hi);
329
void ExpandIntRes_SIGN_EXTEND_INREG (SDNode *N, SDValue &Lo, SDValue &Hi);
330
void ExpandIntRes_TRUNCATE (SDNode *N, SDValue &Lo, SDValue &Hi);
331
void ExpandIntRes_ZERO_EXTEND (SDNode *N, SDValue &Lo, SDValue &Hi);
332
void ExpandIntRes_FP_TO_SINT (SDNode *N, SDValue &Lo, SDValue &Hi);
333
void ExpandIntRes_FP_TO_UINT (SDNode *N, SDValue &Lo, SDValue &Hi);
335
void ExpandIntRes_Logical (SDNode *N, SDValue &Lo, SDValue &Hi);
336
void ExpandIntRes_ADDSUB (SDNode *N, SDValue &Lo, SDValue &Hi);
337
void ExpandIntRes_ADDSUBC (SDNode *N, SDValue &Lo, SDValue &Hi);
338
void ExpandIntRes_ADDSUBE (SDNode *N, SDValue &Lo, SDValue &Hi);
339
void ExpandIntRes_BSWAP (SDNode *N, SDValue &Lo, SDValue &Hi);
340
void ExpandIntRes_MUL (SDNode *N, SDValue &Lo, SDValue &Hi);
341
void ExpandIntRes_SDIV (SDNode *N, SDValue &Lo, SDValue &Hi);
342
void ExpandIntRes_SREM (SDNode *N, SDValue &Lo, SDValue &Hi);
343
void ExpandIntRes_UDIV (SDNode *N, SDValue &Lo, SDValue &Hi);
344
void ExpandIntRes_UREM (SDNode *N, SDValue &Lo, SDValue &Hi);
345
void ExpandIntRes_Shift (SDNode *N, SDValue &Lo, SDValue &Hi);
347
void ExpandShiftByConstant(SDNode *N, unsigned Amt,
348
SDValue &Lo, SDValue &Hi);
349
bool ExpandShiftWithKnownAmountBit(SDNode *N, SDValue &Lo, SDValue &Hi);
350
bool ExpandShiftWithUnknownAmountBit(SDNode *N, SDValue &Lo, SDValue &Hi);
352
// Integer Operand Expansion.
353
bool ExpandIntegerOperand(SDNode *N, unsigned OperandNo);
354
SDValue ExpandIntOp_BIT_CONVERT(SDNode *N);
355
SDValue ExpandIntOp_BR_CC(SDNode *N);
356
SDValue ExpandIntOp_BUILD_VECTOR(SDNode *N);
357
SDValue ExpandIntOp_EXTRACT_ELEMENT(SDNode *N);
358
SDValue ExpandIntOp_SELECT_CC(SDNode *N);
359
SDValue ExpandIntOp_SETCC(SDNode *N);
360
SDValue ExpandIntOp_Shift(SDNode *N);
361
SDValue ExpandIntOp_SINT_TO_FP(SDNode *N);
362
SDValue ExpandIntOp_STORE(StoreSDNode *N, unsigned OpNo);
363
SDValue ExpandIntOp_TRUNCATE(SDNode *N);
364
SDValue ExpandIntOp_UINT_TO_FP(SDNode *N);
365
SDValue ExpandIntOp_RETURNADDR(SDNode *N);
367
void IntegerExpandSetCCOperands(SDValue &NewLHS, SDValue &NewRHS,
368
ISD::CondCode &CCCode, DebugLoc dl);
370
//===--------------------------------------------------------------------===//
371
// Float to Integer Conversion Support: LegalizeFloatTypes.cpp
372
//===--------------------------------------------------------------------===//
374
/// GetSoftenedFloat - Given a processed operand Op which was converted to an
375
/// integer of the same size, this returns the integer. The integer contains
376
/// exactly the same bits as Op - only the type changed. For example, if Op
377
/// is an f32 which was softened to an i32, then this method returns an i32,
378
/// the bits of which coincide with those of Op.
379
SDValue GetSoftenedFloat(SDValue Op) {
380
SDValue &SoftenedOp = SoftenedFloats[Op];
381
RemapValue(SoftenedOp);
382
assert(SoftenedOp.getNode() && "Operand wasn't converted to integer?");
385
void SetSoftenedFloat(SDValue Op, SDValue Result);
387
// Result Float to Integer Conversion.
388
void SoftenFloatResult(SDNode *N, unsigned OpNo);
389
SDValue SoftenFloatRes_BIT_CONVERT(SDNode *N);
390
SDValue SoftenFloatRes_BUILD_PAIR(SDNode *N);
391
SDValue SoftenFloatRes_ConstantFP(ConstantFPSDNode *N);
392
SDValue SoftenFloatRes_EXTRACT_VECTOR_ELT(SDNode *N);
393
SDValue SoftenFloatRes_FABS(SDNode *N);
394
SDValue SoftenFloatRes_FADD(SDNode *N);
395
SDValue SoftenFloatRes_FCEIL(SDNode *N);
396
SDValue SoftenFloatRes_FCOPYSIGN(SDNode *N);
397
SDValue SoftenFloatRes_FCOS(SDNode *N);
398
SDValue SoftenFloatRes_FDIV(SDNode *N);
399
SDValue SoftenFloatRes_FEXP(SDNode *N);
400
SDValue SoftenFloatRes_FEXP2(SDNode *N);
401
SDValue SoftenFloatRes_FFLOOR(SDNode *N);
402
SDValue SoftenFloatRes_FLOG(SDNode *N);
403
SDValue SoftenFloatRes_FLOG2(SDNode *N);
404
SDValue SoftenFloatRes_FLOG10(SDNode *N);
405
SDValue SoftenFloatRes_FMUL(SDNode *N);
406
SDValue SoftenFloatRes_FNEARBYINT(SDNode *N);
407
SDValue SoftenFloatRes_FNEG(SDNode *N);
408
SDValue SoftenFloatRes_FP_EXTEND(SDNode *N);
409
SDValue SoftenFloatRes_FP_ROUND(SDNode *N);
410
SDValue SoftenFloatRes_FPOW(SDNode *N);
411
SDValue SoftenFloatRes_FPOWI(SDNode *N);
412
SDValue SoftenFloatRes_FREM(SDNode *N);
413
SDValue SoftenFloatRes_FRINT(SDNode *N);
414
SDValue SoftenFloatRes_FSIN(SDNode *N);
415
SDValue SoftenFloatRes_FSQRT(SDNode *N);
416
SDValue SoftenFloatRes_FSUB(SDNode *N);
417
SDValue SoftenFloatRes_FTRUNC(SDNode *N);
418
SDValue SoftenFloatRes_LOAD(SDNode *N);
419
SDValue SoftenFloatRes_SELECT(SDNode *N);
420
SDValue SoftenFloatRes_SELECT_CC(SDNode *N);
421
SDValue SoftenFloatRes_UNDEF(SDNode *N);
422
SDValue SoftenFloatRes_VAARG(SDNode *N);
423
SDValue SoftenFloatRes_XINT_TO_FP(SDNode *N);
425
// Operand Float to Integer Conversion.
426
bool SoftenFloatOperand(SDNode *N, unsigned OpNo);
427
SDValue SoftenFloatOp_BIT_CONVERT(SDNode *N);
428
SDValue SoftenFloatOp_BR_CC(SDNode *N);
429
SDValue SoftenFloatOp_FP_ROUND(SDNode *N);
430
SDValue SoftenFloatOp_FP_TO_SINT(SDNode *N);
431
SDValue SoftenFloatOp_FP_TO_UINT(SDNode *N);
432
SDValue SoftenFloatOp_SELECT_CC(SDNode *N);
433
SDValue SoftenFloatOp_SETCC(SDNode *N);
434
SDValue SoftenFloatOp_STORE(SDNode *N, unsigned OpNo);
436
void SoftenSetCCOperands(SDValue &NewLHS, SDValue &NewRHS,
437
ISD::CondCode &CCCode, DebugLoc dl);
439
//===--------------------------------------------------------------------===//
440
// Float Expansion Support: LegalizeFloatTypes.cpp
441
//===--------------------------------------------------------------------===//
443
/// GetExpandedFloat - Given a processed operand Op which was expanded into
444
/// two floating point values of half the size, this returns the two halves.
445
/// The low bits of Op are exactly equal to the bits of Lo; the high bits
446
/// exactly equal Hi. For example, if Op is a ppcf128 which was expanded
447
/// into two f64's, then this method returns the two f64's, with Lo being
448
/// equal to the lower 64 bits of Op, and Hi to the upper 64 bits.
449
void GetExpandedFloat(SDValue Op, SDValue &Lo, SDValue &Hi);
450
void SetExpandedFloat(SDValue Op, SDValue Lo, SDValue Hi);
452
// Float Result Expansion.
453
void ExpandFloatResult(SDNode *N, unsigned ResNo);
454
void ExpandFloatRes_ConstantFP(SDNode *N, SDValue &Lo, SDValue &Hi);
455
void ExpandFloatRes_FABS (SDNode *N, SDValue &Lo, SDValue &Hi);
456
void ExpandFloatRes_FADD (SDNode *N, SDValue &Lo, SDValue &Hi);
457
void ExpandFloatRes_FCEIL (SDNode *N, SDValue &Lo, SDValue &Hi);
458
void ExpandFloatRes_FCOS (SDNode *N, SDValue &Lo, SDValue &Hi);
459
void ExpandFloatRes_FDIV (SDNode *N, SDValue &Lo, SDValue &Hi);
460
void ExpandFloatRes_FEXP (SDNode *N, SDValue &Lo, SDValue &Hi);
461
void ExpandFloatRes_FEXP2 (SDNode *N, SDValue &Lo, SDValue &Hi);
462
void ExpandFloatRes_FFLOOR (SDNode *N, SDValue &Lo, SDValue &Hi);
463
void ExpandFloatRes_FLOG (SDNode *N, SDValue &Lo, SDValue &Hi);
464
void ExpandFloatRes_FLOG2 (SDNode *N, SDValue &Lo, SDValue &Hi);
465
void ExpandFloatRes_FLOG10 (SDNode *N, SDValue &Lo, SDValue &Hi);
466
void ExpandFloatRes_FMUL (SDNode *N, SDValue &Lo, SDValue &Hi);
467
void ExpandFloatRes_FNEARBYINT(SDNode *N, SDValue &Lo, SDValue &Hi);
468
void ExpandFloatRes_FNEG (SDNode *N, SDValue &Lo, SDValue &Hi);
469
void ExpandFloatRes_FP_EXTEND (SDNode *N, SDValue &Lo, SDValue &Hi);
470
void ExpandFloatRes_FPOW (SDNode *N, SDValue &Lo, SDValue &Hi);
471
void ExpandFloatRes_FPOWI (SDNode *N, SDValue &Lo, SDValue &Hi);
472
void ExpandFloatRes_FRINT (SDNode *N, SDValue &Lo, SDValue &Hi);
473
void ExpandFloatRes_FSIN (SDNode *N, SDValue &Lo, SDValue &Hi);
474
void ExpandFloatRes_FSQRT (SDNode *N, SDValue &Lo, SDValue &Hi);
475
void ExpandFloatRes_FSUB (SDNode *N, SDValue &Lo, SDValue &Hi);
476
void ExpandFloatRes_FTRUNC (SDNode *N, SDValue &Lo, SDValue &Hi);
477
void ExpandFloatRes_LOAD (SDNode *N, SDValue &Lo, SDValue &Hi);
478
void ExpandFloatRes_XINT_TO_FP(SDNode *N, SDValue &Lo, SDValue &Hi);
480
// Float Operand Expansion.
481
bool ExpandFloatOperand(SDNode *N, unsigned OperandNo);
482
SDValue ExpandFloatOp_BR_CC(SDNode *N);
483
SDValue ExpandFloatOp_FP_ROUND(SDNode *N);
484
SDValue ExpandFloatOp_FP_TO_SINT(SDNode *N);
485
SDValue ExpandFloatOp_FP_TO_UINT(SDNode *N);
486
SDValue ExpandFloatOp_SELECT_CC(SDNode *N);
487
SDValue ExpandFloatOp_SETCC(SDNode *N);
488
SDValue ExpandFloatOp_STORE(SDNode *N, unsigned OpNo);
490
void FloatExpandSetCCOperands(SDValue &NewLHS, SDValue &NewRHS,
491
ISD::CondCode &CCCode, DebugLoc dl);
493
//===--------------------------------------------------------------------===//
494
// Scalarization Support: LegalizeVectorTypes.cpp
495
//===--------------------------------------------------------------------===//
497
/// GetScalarizedVector - Given a processed one-element vector Op which was
498
/// scalarized to its element type, this returns the element. For example,
499
/// if Op is a v1i32, Op = < i32 val >, this method returns val, an i32.
500
SDValue GetScalarizedVector(SDValue Op) {
501
SDValue &ScalarizedOp = ScalarizedVectors[Op];
502
RemapValue(ScalarizedOp);
503
assert(ScalarizedOp.getNode() && "Operand wasn't scalarized?");
506
void SetScalarizedVector(SDValue Op, SDValue Result);
508
// Vector Result Scalarization: <1 x ty> -> ty.
509
void ScalarizeVectorResult(SDNode *N, unsigned OpNo);
510
SDValue ScalarizeVecRes_BinOp(SDNode *N);
511
SDValue ScalarizeVecRes_UnaryOp(SDNode *N);
512
SDValue ScalarizeVecRes_InregOp(SDNode *N);
514
SDValue ScalarizeVecRes_BIT_CONVERT(SDNode *N);
515
SDValue ScalarizeVecRes_CONVERT_RNDSAT(SDNode *N);
516
SDValue ScalarizeVecRes_EXTRACT_SUBVECTOR(SDNode *N);
517
SDValue ScalarizeVecRes_FPOWI(SDNode *N);
518
SDValue ScalarizeVecRes_INSERT_VECTOR_ELT(SDNode *N);
519
SDValue ScalarizeVecRes_LOAD(LoadSDNode *N);
520
SDValue ScalarizeVecRes_SCALAR_TO_VECTOR(SDNode *N);
521
SDValue ScalarizeVecRes_SIGN_EXTEND_INREG(SDNode *N);
522
SDValue ScalarizeVecRes_SELECT(SDNode *N);
523
SDValue ScalarizeVecRes_SELECT_CC(SDNode *N);
524
SDValue ScalarizeVecRes_SETCC(SDNode *N);
525
SDValue ScalarizeVecRes_UNDEF(SDNode *N);
526
SDValue ScalarizeVecRes_VECTOR_SHUFFLE(SDNode *N);
527
SDValue ScalarizeVecRes_VSETCC(SDNode *N);
529
// Vector Operand Scalarization: <1 x ty> -> ty.
530
bool ScalarizeVectorOperand(SDNode *N, unsigned OpNo);
531
SDValue ScalarizeVecOp_BIT_CONVERT(SDNode *N);
532
SDValue ScalarizeVecOp_CONCAT_VECTORS(SDNode *N);
533
SDValue ScalarizeVecOp_EXTRACT_VECTOR_ELT(SDNode *N);
534
SDValue ScalarizeVecOp_STORE(StoreSDNode *N, unsigned OpNo);
536
//===--------------------------------------------------------------------===//
537
// Vector Splitting Support: LegalizeVectorTypes.cpp
538
//===--------------------------------------------------------------------===//
540
/// GetSplitVector - Given a processed vector Op which was split into vectors
541
/// of half the size, this method returns the halves. The first elements of
542
/// Op coincide with the elements of Lo; the remaining elements of Op coincide
543
/// with the elements of Hi: Op is what you would get by concatenating Lo and
544
/// Hi. For example, if Op is a v8i32 that was split into two v4i32's, then
545
/// this method returns the two v4i32's, with Lo corresponding to the first 4
546
/// elements of Op, and Hi to the last 4 elements.
547
void GetSplitVector(SDValue Op, SDValue &Lo, SDValue &Hi);
548
void SetSplitVector(SDValue Op, SDValue Lo, SDValue Hi);
550
// Vector Result Splitting: <128 x ty> -> 2 x <64 x ty>.
551
void SplitVectorResult(SDNode *N, unsigned OpNo);
552
void SplitVecRes_BinOp(SDNode *N, SDValue &Lo, SDValue &Hi);
553
void SplitVecRes_UnaryOp(SDNode *N, SDValue &Lo, SDValue &Hi);
554
void SplitVecRes_InregOp(SDNode *N, SDValue &Lo, SDValue &Hi);
556
void SplitVecRes_BIT_CONVERT(SDNode *N, SDValue &Lo, SDValue &Hi);
557
void SplitVecRes_BUILD_PAIR(SDNode *N, SDValue &Lo, SDValue &Hi);
558
void SplitVecRes_BUILD_VECTOR(SDNode *N, SDValue &Lo, SDValue &Hi);
559
void SplitVecRes_CONCAT_VECTORS(SDNode *N, SDValue &Lo, SDValue &Hi);
560
void SplitVecRes_CONVERT_RNDSAT(SDNode *N, SDValue &Lo, SDValue &Hi);
561
void SplitVecRes_EXTRACT_SUBVECTOR(SDNode *N, SDValue &Lo, SDValue &Hi);
562
void SplitVecRes_FPOWI(SDNode *N, SDValue &Lo, SDValue &Hi);
563
void SplitVecRes_INSERT_VECTOR_ELT(SDNode *N, SDValue &Lo, SDValue &Hi);
564
void SplitVecRes_LOAD(LoadSDNode *N, SDValue &Lo, SDValue &Hi);
565
void SplitVecRes_SCALAR_TO_VECTOR(SDNode *N, SDValue &Lo, SDValue &Hi);
566
void SplitVecRes_SIGN_EXTEND_INREG(SDNode *N, SDValue &Lo, SDValue &Hi);
567
void SplitVecRes_SETCC(SDNode *N, SDValue &Lo, SDValue &Hi);
568
void SplitVecRes_UNDEF(SDNode *N, SDValue &Lo, SDValue &Hi);
569
void SplitVecRes_VECTOR_SHUFFLE(ShuffleVectorSDNode *N, SDValue &Lo,
572
// Vector Operand Splitting: <128 x ty> -> 2 x <64 x ty>.
573
bool SplitVectorOperand(SDNode *N, unsigned OpNo);
574
SDValue SplitVecOp_UnaryOp(SDNode *N);
576
SDValue SplitVecOp_BIT_CONVERT(SDNode *N);
577
SDValue SplitVecOp_EXTRACT_SUBVECTOR(SDNode *N);
578
SDValue SplitVecOp_EXTRACT_VECTOR_ELT(SDNode *N);
579
SDValue SplitVecOp_STORE(StoreSDNode *N, unsigned OpNo);
581
//===--------------------------------------------------------------------===//
582
// Vector Widening Support: LegalizeVectorTypes.cpp
583
//===--------------------------------------------------------------------===//
585
/// GetWidenedVector - Given a processed vector Op which was widened into a
586
/// larger vector, this method returns the larger vector. The elements of
587
/// the returned vector consist of the elements of Op followed by elements
588
/// containing rubbish. For example, if Op is a v2i32 that was widened to a
589
/// v4i32, then this method returns a v4i32 for which the first two elements
590
/// are the same as those of Op, while the last two elements contain rubbish.
591
SDValue GetWidenedVector(SDValue Op) {
592
SDValue &WidenedOp = WidenedVectors[Op];
593
RemapValue(WidenedOp);
594
assert(WidenedOp.getNode() && "Operand wasn't widened?");
597
void SetWidenedVector(SDValue Op, SDValue Result);
599
// Widen Vector Result Promotion.
600
void WidenVectorResult(SDNode *N, unsigned ResNo);
601
SDValue WidenVecRes_BIT_CONVERT(SDNode* N);
602
SDValue WidenVecRes_BUILD_VECTOR(SDNode* N);
603
SDValue WidenVecRes_CONCAT_VECTORS(SDNode* N);
604
SDValue WidenVecRes_CONVERT_RNDSAT(SDNode* N);
605
SDValue WidenVecRes_EXTRACT_SUBVECTOR(SDNode* N);
606
SDValue WidenVecRes_INSERT_VECTOR_ELT(SDNode* N);
607
SDValue WidenVecRes_LOAD(SDNode* N);
608
SDValue WidenVecRes_SCALAR_TO_VECTOR(SDNode* N);
609
SDValue WidenVecRes_SIGN_EXTEND_INREG(SDNode* N);
610
SDValue WidenVecRes_SELECT(SDNode* N);
611
SDValue WidenVecRes_SELECT_CC(SDNode* N);
612
SDValue WidenVecRes_SETCC(SDNode* N);
613
SDValue WidenVecRes_UNDEF(SDNode *N);
614
SDValue WidenVecRes_VECTOR_SHUFFLE(ShuffleVectorSDNode *N);
615
SDValue WidenVecRes_VSETCC(SDNode* N);
617
SDValue WidenVecRes_Binary(SDNode *N);
618
SDValue WidenVecRes_Convert(SDNode *N);
619
SDValue WidenVecRes_Shift(SDNode *N);
620
SDValue WidenVecRes_Unary(SDNode *N);
621
SDValue WidenVecRes_InregOp(SDNode *N);
623
// Widen Vector Operand.
624
bool WidenVectorOperand(SDNode *N, unsigned ResNo);
625
SDValue WidenVecOp_BIT_CONVERT(SDNode *N);
626
SDValue WidenVecOp_CONCAT_VECTORS(SDNode *N);
627
SDValue WidenVecOp_EXTRACT_VECTOR_ELT(SDNode *N);
628
SDValue WidenVecOp_EXTRACT_SUBVECTOR(SDNode *N);
629
SDValue WidenVecOp_STORE(SDNode* N);
631
SDValue WidenVecOp_Convert(SDNode *N);
633
//===--------------------------------------------------------------------===//
634
// Vector Widening Utilities Support: LegalizeVectorTypes.cpp
635
//===--------------------------------------------------------------------===//
637
/// Helper GenWidenVectorLoads - Helper function to generate a set of
638
/// loads to load a vector with a resulting wider type. It takes
639
/// LdChain: list of chains for the load to be generated.
640
/// Ld: load to widen
641
SDValue GenWidenVectorLoads(SmallVector<SDValue, 16>& LdChain,
644
/// GenWidenVectorExtLoads - Helper function to generate a set of extension
645
/// loads to load a ector with a resulting wider type. It takes
646
/// LdChain: list of chains for the load to be generated.
647
/// Ld: load to widen
648
/// ExtType: extension element type
649
SDValue GenWidenVectorExtLoads(SmallVector<SDValue, 16>& LdChain,
650
LoadSDNode *LD, ISD::LoadExtType ExtType);
652
/// Helper genWidenVectorStores - Helper function to generate a set of
653
/// stores to store a widen vector into non widen memory
654
/// StChain: list of chains for the stores we have generated
655
/// ST: store of a widen value
656
void GenWidenVectorStores(SmallVector<SDValue, 16>& StChain, StoreSDNode *ST);
658
/// Helper genWidenVectorTruncStores - Helper function to generate a set of
659
/// stores to store a truncate widen vector into non widen memory
660
/// StChain: list of chains for the stores we have generated
661
/// ST: store of a widen value
662
void GenWidenVectorTruncStores(SmallVector<SDValue, 16>& StChain,
665
/// Modifies a vector input (widen or narrows) to a vector of NVT. The
666
/// input vector must have the same element type as NVT.
667
SDValue ModifyToType(SDValue InOp, EVT WidenVT);
670
//===--------------------------------------------------------------------===//
671
// Generic Splitting: LegalizeTypesGeneric.cpp
672
//===--------------------------------------------------------------------===//
674
// Legalization methods which only use that the illegal type is split into two
675
// not necessarily identical types. As such they can be used for splitting
676
// vectors and expanding integers and floats.
678
void GetSplitOp(SDValue Op, SDValue &Lo, SDValue &Hi) {
679
if (Op.getValueType().isVector())
680
GetSplitVector(Op, Lo, Hi);
681
else if (Op.getValueType().isInteger())
682
GetExpandedInteger(Op, Lo, Hi);
684
GetExpandedFloat(Op, Lo, Hi);
687
/// GetSplitDestVTs - Compute the VTs needed for the low/hi parts of a type
688
/// which is split (or expanded) into two not necessarily identical pieces.
689
void GetSplitDestVTs(EVT InVT, EVT &LoVT, EVT &HiVT);
691
/// GetPairElements - Use ISD::EXTRACT_ELEMENT nodes to extract the low and
692
/// high parts of the given value.
693
void GetPairElements(SDValue Pair, SDValue &Lo, SDValue &Hi);
695
// Generic Result Splitting.
696
void SplitRes_MERGE_VALUES(SDNode *N, SDValue &Lo, SDValue &Hi);
697
void SplitRes_SELECT (SDNode *N, SDValue &Lo, SDValue &Hi);
698
void SplitRes_SELECT_CC (SDNode *N, SDValue &Lo, SDValue &Hi);
699
void SplitRes_UNDEF (SDNode *N, SDValue &Lo, SDValue &Hi);
701
//===--------------------------------------------------------------------===//
702
// Generic Expansion: LegalizeTypesGeneric.cpp
703
//===--------------------------------------------------------------------===//
705
// Legalization methods which only use that the illegal type is split into two
706
// identical types of half the size, and that the Lo/Hi part is stored first
707
// in memory on little/big-endian machines, followed by the Hi/Lo part. As
708
// such they can be used for expanding integers and floats.
710
void GetExpandedOp(SDValue Op, SDValue &Lo, SDValue &Hi) {
711
if (Op.getValueType().isInteger())
712
GetExpandedInteger(Op, Lo, Hi);
714
GetExpandedFloat(Op, Lo, Hi);
717
// Generic Result Expansion.
718
void ExpandRes_BIT_CONVERT (SDNode *N, SDValue &Lo, SDValue &Hi);
719
void ExpandRes_BUILD_PAIR (SDNode *N, SDValue &Lo, SDValue &Hi);
720
void ExpandRes_EXTRACT_ELEMENT (SDNode *N, SDValue &Lo, SDValue &Hi);
721
void ExpandRes_EXTRACT_VECTOR_ELT(SDNode *N, SDValue &Lo, SDValue &Hi);
722
void ExpandRes_NormalLoad (SDNode *N, SDValue &Lo, SDValue &Hi);
723
void ExpandRes_VAARG (SDNode *N, SDValue &Lo, SDValue &Hi);
725
// Generic Operand Expansion.
726
SDValue ExpandOp_BIT_CONVERT (SDNode *N);
727
SDValue ExpandOp_BUILD_VECTOR (SDNode *N);
728
SDValue ExpandOp_EXTRACT_ELEMENT (SDNode *N);
729
SDValue ExpandOp_INSERT_VECTOR_ELT(SDNode *N);
730
SDValue ExpandOp_SCALAR_TO_VECTOR (SDNode *N);
731
SDValue ExpandOp_NormalStore (SDNode *N, unsigned OpNo);
734
} // end namespace llvm.