1
/* Definitions for data structures and routines for the regular
3
Copyright (C) 1985, 1989, 1990, 1991, 1992, 1993, 1995, 1996, 1997, 1998,
4
2000, 2001, 2002, 2003, 2005, 2006, 2009, 2010 Free Software Foundation,
6
This file is part of the GNU C Library.
8
This program is free software; you can redistribute it and/or modify
9
it under the terms of the GNU General Public License as published by
10
the Free Software Foundation; either version 3, or (at your option)
13
This program is distributed in the hope that it will be useful,
14
but WITHOUT ANY WARRANTY; without even the implied warranty of
15
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16
GNU General Public License for more details.
18
You should have received a copy of the GNU General Public License along
19
with this program; if not, write to the Free Software Foundation,
20
Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */
25
#include <sys/types.h>
27
/* Allow the use in C++ code. */
32
/* Define __USE_GNU_REGEX to declare GNU extensions that violate the
33
POSIX name space rules. */
34
#undef __USE_GNU_REGEX
35
#if (defined _GNU_SOURCE \
36
|| (!defined _POSIX_C_SOURCE && !defined _POSIX_SOURCE \
37
&& !defined _XOPEN_SOURCE))
38
# define __USE_GNU_REGEX 1
41
#ifdef _REGEX_LARGE_OFFSETS
43
/* Use types and values that are wide enough to represent signed and
44
unsigned byte offsets in memory. This currently works only when
45
the regex code is used outside of the GNU C library; it is not yet
46
supported within glibc itself, and glibc users should not define
47
_REGEX_LARGE_OFFSETS. */
49
/* The type of the offset of a byte within a string.
50
For historical reasons POSIX 1003.1-2004 requires that regoff_t be
51
at least as wide as off_t. However, many common POSIX platforms set
52
regoff_t to the more-sensible ssize_t and the Open Group has
53
signalled its intention to change the requirement to be that
54
regoff_t be at least as wide as ptrdiff_t and ssize_t; see XBD ERN
55
60 (2005-08-25). We don't know of any hosts where ssize_t or
56
ptrdiff_t is wider than ssize_t, so ssize_t is safe. */
57
typedef ssize_t regoff_t;
59
/* The type of nonnegative object indexes. Traditionally, GNU regex
60
uses 'int' for these. Code that uses __re_idx_t should work
61
regardless of whether the type is signed. */
62
typedef size_t __re_idx_t;
64
/* The type of object sizes. */
65
typedef size_t __re_size_t;
67
/* The type of object sizes, in places where the traditional code
68
uses unsigned long int. */
69
typedef size_t __re_long_size_t;
73
/* Use types that are binary-compatible with the traditional GNU regex
74
implementation, which mishandles strings longer than INT_MAX. */
77
typedef int __re_idx_t;
78
typedef unsigned int __re_size_t;
79
typedef unsigned long int __re_long_size_t;
83
/* The following two types have to be signed and unsigned integer type
84
wide enough to hold a value of a pointer. For most ANSI compilers
85
ptrdiff_t and size_t should be likely OK. Still size of these two
86
types is 2 for Microsoft C. Ugh... */
87
typedef long int s_reg_t;
88
typedef unsigned long int active_reg_t;
90
/* The following bits are used to determine the regexp syntax we
91
recognize. The set/not-set meanings are chosen so that Emacs syntax
92
remains the value 0. The bits are given in alphabetical order, and
93
the definitions shifted by one from the previous bit; thus, when we
94
add or remove a bit, only one other definition need change. */
95
typedef unsigned long int reg_syntax_t;
97
#ifdef __USE_GNU_REGEX
99
/* If this bit is not set, then \ inside a bracket expression is literal.
100
If set, then such a \ quotes the following character. */
101
# define RE_BACKSLASH_ESCAPE_IN_LISTS ((unsigned long int) 1)
103
/* If this bit is not set, then + and ? are operators, and \+ and \? are
105
If set, then \+ and \? are operators and + and ? are literals. */
106
# define RE_BK_PLUS_QM (RE_BACKSLASH_ESCAPE_IN_LISTS << 1)
108
/* If this bit is set, then character classes are supported. They are:
109
[:alpha:], [:upper:], [:lower:], [:digit:], [:alnum:], [:xdigit:],
110
[:space:], [:print:], [:punct:], [:graph:], and [:cntrl:].
111
If not set, then character classes are not supported. */
112
# define RE_CHAR_CLASSES (RE_BK_PLUS_QM << 1)
114
/* If this bit is set, then ^ and $ are always anchors (outside bracket
115
expressions, of course).
116
If this bit is not set, then it depends:
117
^ is an anchor if it is at the beginning of a regular
118
expression or after an open-group or an alternation operator;
119
$ is an anchor if it is at the end of a regular expression, or
120
before a close-group or an alternation operator.
122
This bit could be (re)combined with RE_CONTEXT_INDEP_OPS, because
123
POSIX draft 11.2 says that * etc. in leading positions is undefined.
124
We already implemented a previous draft which made those constructs
125
invalid, though, so we haven't changed the code back. */
126
# define RE_CONTEXT_INDEP_ANCHORS (RE_CHAR_CLASSES << 1)
128
/* If this bit is set, then special characters are always special
129
regardless of where they are in the pattern.
130
If this bit is not set, then special characters are special only in
131
some contexts; otherwise they are ordinary. Specifically,
132
* + ? and intervals are only special when not after the beginning,
133
open-group, or alternation operator. */
134
# define RE_CONTEXT_INDEP_OPS (RE_CONTEXT_INDEP_ANCHORS << 1)
136
/* If this bit is set, then *, +, ?, and { cannot be first in an re or
137
immediately after an alternation or begin-group operator. */
138
# define RE_CONTEXT_INVALID_OPS (RE_CONTEXT_INDEP_OPS << 1)
140
/* If this bit is set, then . matches newline.
141
If not set, then it doesn't. */
142
# define RE_DOT_NEWLINE (RE_CONTEXT_INVALID_OPS << 1)
144
/* If this bit is set, then . doesn't match NUL.
145
If not set, then it does. */
146
# define RE_DOT_NOT_NULL (RE_DOT_NEWLINE << 1)
148
/* If this bit is set, nonmatching lists [^...] do not match newline.
149
If not set, they do. */
150
# define RE_HAT_LISTS_NOT_NEWLINE (RE_DOT_NOT_NULL << 1)
152
/* If this bit is set, either \{...\} or {...} defines an
153
interval, depending on RE_NO_BK_BRACES.
154
If not set, \{, \}, {, and } are literals. */
155
# define RE_INTERVALS (RE_HAT_LISTS_NOT_NEWLINE << 1)
157
/* If this bit is set, +, ? and | aren't recognized as operators.
158
If not set, they are. */
159
# define RE_LIMITED_OPS (RE_INTERVALS << 1)
161
/* If this bit is set, newline is an alternation operator.
162
If not set, newline is literal. */
163
# define RE_NEWLINE_ALT (RE_LIMITED_OPS << 1)
165
/* If this bit is set, then `{...}' defines an interval, and \{ and \}
167
If not set, then `\{...\}' defines an interval. */
168
# define RE_NO_BK_BRACES (RE_NEWLINE_ALT << 1)
170
/* If this bit is set, (...) defines a group, and \( and \) are literals.
171
If not set, \(...\) defines a group, and ( and ) are literals. */
172
# define RE_NO_BK_PARENS (RE_NO_BK_BRACES << 1)
174
/* If this bit is set, then \<digit> matches <digit>.
175
If not set, then \<digit> is a back-reference. */
176
# define RE_NO_BK_REFS (RE_NO_BK_PARENS << 1)
178
/* If this bit is set, then | is an alternation operator, and \| is literal.
179
If not set, then \| is an alternation operator, and | is literal. */
180
# define RE_NO_BK_VBAR (RE_NO_BK_REFS << 1)
182
/* If this bit is set, then an ending range point collating higher
183
than the starting range point, as in [z-a], is invalid.
184
If not set, then when ending range point collates higher than the
185
starting range point, the range is ignored. */
186
# define RE_NO_EMPTY_RANGES (RE_NO_BK_VBAR << 1)
188
/* If this bit is set, then an unmatched ) is ordinary.
189
If not set, then an unmatched ) is invalid. */
190
# define RE_UNMATCHED_RIGHT_PAREN_ORD (RE_NO_EMPTY_RANGES << 1)
192
/* If this bit is set, succeed as soon as we match the whole pattern,
193
without further backtracking. */
194
# define RE_NO_POSIX_BACKTRACKING (RE_UNMATCHED_RIGHT_PAREN_ORD << 1)
196
/* If this bit is set, do not process the GNU regex operators.
197
If not set, then the GNU regex operators are recognized. */
198
# define RE_NO_GNU_OPS (RE_NO_POSIX_BACKTRACKING << 1)
200
/* If this bit is set, turn on internal regex debugging.
201
If not set, and debugging was on, turn it off.
202
This only works if regex.c is compiled -DDEBUG.
203
We define this bit always, so that all that's needed to turn on
204
debugging is to recompile regex.c; the calling code can always have
205
this bit set, and it won't affect anything in the normal case. */
206
# define RE_DEBUG (RE_NO_GNU_OPS << 1)
208
/* If this bit is set, a syntactically invalid interval is treated as
209
a string of ordinary characters. For example, the ERE 'a{1' is
210
treated as 'a\{1'. */
211
# define RE_INVALID_INTERVAL_ORD (RE_DEBUG << 1)
213
/* If this bit is set, then ignore case when matching.
214
If not set, then case is significant. */
215
# define RE_ICASE (RE_INVALID_INTERVAL_ORD << 1)
217
/* This bit is used internally like RE_CONTEXT_INDEP_ANCHORS but only
218
for ^, because it is difficult to scan the regex backwards to find
219
whether ^ should be special. */
220
# define RE_CARET_ANCHORS_HERE (RE_ICASE << 1)
222
/* If this bit is set, then \{ cannot be first in a regex or
223
immediately after an alternation, open-group or \} operator. */
224
# define RE_CONTEXT_INVALID_DUP (RE_CARET_ANCHORS_HERE << 1)
226
/* If this bit is set, then no_sub will be set to 1 during
227
re_compile_pattern. */
228
# define RE_NO_SUB (RE_CONTEXT_INVALID_DUP << 1)
230
#endif /* defined __USE_GNU_REGEX */
232
/* This global variable defines the particular regexp syntax to use (for
233
some interfaces). When a regexp is compiled, the syntax used is
234
stored in the pattern buffer, so changing this does not affect
235
already-compiled regexps. */
236
extern reg_syntax_t re_syntax_options;
238
#ifdef __USE_GNU_REGEX
239
/* Define combinations of the above bits for the standard possibilities.
240
(The [[[ comments delimit what gets put into the Texinfo file, so
241
don't delete them!) */
242
/* [[[begin syntaxes]]] */
243
# define RE_SYNTAX_EMACS 0
245
# define RE_SYNTAX_AWK \
246
(RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DOT_NOT_NULL \
247
| RE_NO_BK_PARENS | RE_NO_BK_REFS \
248
| RE_NO_BK_VBAR | RE_NO_EMPTY_RANGES \
249
| RE_DOT_NEWLINE | RE_CONTEXT_INDEP_ANCHORS \
250
| RE_UNMATCHED_RIGHT_PAREN_ORD | RE_NO_GNU_OPS)
252
# define RE_SYNTAX_GNU_AWK \
253
((RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DEBUG) \
254
& ~(RE_DOT_NOT_NULL | RE_INTERVALS | RE_CONTEXT_INDEP_OPS \
255
| RE_CONTEXT_INVALID_OPS ))
257
# define RE_SYNTAX_POSIX_AWK \
258
(RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS \
259
| RE_INTERVALS | RE_NO_GNU_OPS)
261
# define RE_SYNTAX_GREP \
262
(RE_BK_PLUS_QM | RE_CHAR_CLASSES \
263
| RE_HAT_LISTS_NOT_NEWLINE | RE_INTERVALS \
266
# define RE_SYNTAX_EGREP \
267
(RE_CHAR_CLASSES | RE_CONTEXT_INDEP_ANCHORS \
268
| RE_CONTEXT_INDEP_OPS | RE_HAT_LISTS_NOT_NEWLINE \
269
| RE_NEWLINE_ALT | RE_NO_BK_PARENS \
272
# define RE_SYNTAX_POSIX_EGREP \
273
(RE_SYNTAX_EGREP | RE_INTERVALS | RE_NO_BK_BRACES \
274
| RE_INVALID_INTERVAL_ORD)
276
/* P1003.2/D11.2, section 4.20.7.1, lines 5078ff. */
277
# define RE_SYNTAX_ED RE_SYNTAX_POSIX_BASIC
279
# define RE_SYNTAX_SED RE_SYNTAX_POSIX_BASIC
281
/* Syntax bits common to both basic and extended POSIX regex syntax. */
282
# define _RE_SYNTAX_POSIX_COMMON \
283
(RE_CHAR_CLASSES | RE_DOT_NEWLINE | RE_DOT_NOT_NULL \
284
| RE_INTERVALS | RE_NO_EMPTY_RANGES)
286
# define RE_SYNTAX_POSIX_BASIC \
287
(_RE_SYNTAX_POSIX_COMMON | RE_BK_PLUS_QM | RE_CONTEXT_INVALID_DUP)
289
/* Differs from ..._POSIX_BASIC only in that RE_BK_PLUS_QM becomes
290
RE_LIMITED_OPS, i.e., \? \+ \| are not recognized. Actually, this
291
isn't minimal, since other operators, such as \`, aren't disabled. */
292
# define RE_SYNTAX_POSIX_MINIMAL_BASIC \
293
(_RE_SYNTAX_POSIX_COMMON | RE_LIMITED_OPS)
295
# define RE_SYNTAX_POSIX_EXTENDED \
296
(_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS \
297
| RE_CONTEXT_INDEP_OPS | RE_NO_BK_BRACES \
298
| RE_NO_BK_PARENS | RE_NO_BK_VBAR \
299
| RE_CONTEXT_INVALID_OPS | RE_UNMATCHED_RIGHT_PAREN_ORD)
301
/* Differs from ..._POSIX_EXTENDED in that RE_CONTEXT_INDEP_OPS is
302
removed and RE_NO_BK_REFS is added. */
303
# define RE_SYNTAX_POSIX_MINIMAL_EXTENDED \
304
(_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS \
305
| RE_CONTEXT_INVALID_OPS | RE_NO_BK_BRACES \
306
| RE_NO_BK_PARENS | RE_NO_BK_REFS \
307
| RE_NO_BK_VBAR | RE_UNMATCHED_RIGHT_PAREN_ORD)
308
/* [[[end syntaxes]]] */
310
#endif /* defined __USE_GNU_REGEX */
312
#ifdef __USE_GNU_REGEX
314
/* Maximum number of duplicates an interval can allow. POSIX-conforming
315
systems might define this in <limits.h>, but we want our
316
value, so remove any previous define. */
321
/* RE_DUP_MAX is 2**15 - 1 because an earlier implementation stored
322
the counter as a 2-byte signed integer. This is no longer true, so
323
RE_DUP_MAX could be increased to (INT_MAX / 10 - 1), or to
324
((SIZE_MAX - 2) / 10 - 1) if _REGEX_LARGE_OFFSETS is defined.
325
However, there would be a huge performance problem if someone
326
actually used a pattern like a\{214748363\}, so RE_DUP_MAX retains
327
its historical value. */
328
# define RE_DUP_MAX (0x7fff)
330
#endif /* defined __USE_GNU_REGEX */
333
/* POSIX `cflags' bits (i.e., information for `regcomp'). */
335
/* If this bit is set, then use extended regular expression syntax.
336
If not set, then use basic regular expression syntax. */
337
#define REG_EXTENDED 1
339
/* If this bit is set, then ignore case when matching.
340
If not set, then case is significant. */
341
#define REG_ICASE (1 << 1)
343
/* If this bit is set, then anchors do not match at newline
344
characters in the string.
345
If not set, then anchors do match at newlines. */
346
#define REG_NEWLINE (1 << 2)
348
/* If this bit is set, then report only success or fail in regexec.
349
If not set, then returns differ between not matching and errors. */
350
#define REG_NOSUB (1 << 3)
353
/* POSIX `eflags' bits (i.e., information for regexec). */
355
/* If this bit is set, then the beginning-of-line operator doesn't match
356
the beginning of the string (presumably because it's not the
357
beginning of a line).
358
If not set, then the beginning-of-line operator does match the
359
beginning of the string. */
362
/* Like REG_NOTBOL, except for the end-of-line. */
363
#define REG_NOTEOL (1 << 1)
365
/* Use PMATCH[0] to delimit the start and end of the search in the
367
#define REG_STARTEND (1 << 2)
370
/* If any error codes are removed, changed, or added, update the
371
`__re_error_msgid' table in regcomp.c. */
375
_REG_ENOSYS = -1, /* This will never happen for this implementation. */
376
_REG_NOERROR = 0, /* Success. */
377
_REG_NOMATCH, /* Didn't find a match (for regexec). */
379
/* POSIX regcomp return error codes. (In the order listed in the
381
_REG_BADPAT, /* Invalid pattern. */
382
_REG_ECOLLATE, /* Invalid collating element. */
383
_REG_ECTYPE, /* Invalid character class name. */
384
_REG_EESCAPE, /* Trailing backslash. */
385
_REG_ESUBREG, /* Invalid back reference. */
386
_REG_EBRACK, /* Unmatched left bracket. */
387
_REG_EPAREN, /* Parenthesis imbalance. */
388
_REG_EBRACE, /* Unmatched \{. */
389
_REG_BADBR, /* Invalid contents of \{\}. */
390
_REG_ERANGE, /* Invalid range end. */
391
_REG_ESPACE, /* Ran out of memory. */
392
_REG_BADRPT, /* No preceding re for repetition op. */
394
/* Error codes we've added. */
395
_REG_EEND, /* Premature end. */
396
_REG_ESIZE, /* Compiled pattern bigger than 2^16 bytes. */
397
_REG_ERPAREN /* Unmatched ) or \); not returned from regcomp. */
401
# define REG_ENOSYS _REG_ENOSYS
403
#define REG_NOERROR _REG_NOERROR
404
#define REG_NOMATCH _REG_NOMATCH
405
#define REG_BADPAT _REG_BADPAT
406
#define REG_ECOLLATE _REG_ECOLLATE
407
#define REG_ECTYPE _REG_ECTYPE
408
#define REG_EESCAPE _REG_EESCAPE
409
#define REG_ESUBREG _REG_ESUBREG
410
#define REG_EBRACK _REG_EBRACK
411
#define REG_EPAREN _REG_EPAREN
412
#define REG_EBRACE _REG_EBRACE
413
#define REG_BADBR _REG_BADBR
414
#define REG_ERANGE _REG_ERANGE
415
#define REG_ESPACE _REG_ESPACE
416
#define REG_BADRPT _REG_BADRPT
417
#define REG_EEND _REG_EEND
418
#define REG_ESIZE _REG_ESIZE
419
#define REG_ERPAREN _REG_ERPAREN
421
/* struct re_pattern_buffer normally uses member names like `buffer'
422
that POSIX does not allow. In POSIX mode these members have names
423
with leading `re_' (e.g., `re_buffer'). */
424
#ifdef __USE_GNU_REGEX
425
# define _REG_RE_NAME(id) id
426
# define _REG_RM_NAME(id) id
428
# define _REG_RE_NAME(id) re_##id
429
# define _REG_RM_NAME(id) rm_##id
432
/* The user can specify the type of the re_translate member by
433
defining the macro RE_TRANSLATE_TYPE, which defaults to unsigned
434
char *. This pollutes the POSIX name space, so in POSIX mode just
435
use unsigned char *. */
436
#ifdef __USE_GNU_REGEX
437
# ifndef RE_TRANSLATE_TYPE
438
# define RE_TRANSLATE_TYPE unsigned char *
440
# define REG_TRANSLATE_TYPE RE_TRANSLATE_TYPE
442
# define REG_TRANSLATE_TYPE unsigned char *
445
/* This data structure represents a compiled pattern. Before calling
446
the pattern compiler, the fields `buffer', `allocated', `fastmap',
447
`translate', and `no_sub' can be set. After the pattern has been
448
compiled, the `re_nsub' field is available. All other fields are
449
private to the regex routines. */
451
struct re_pattern_buffer
453
/* Space that holds the compiled pattern. It is declared as
454
`unsigned char *' because its elements are sometimes used as
456
unsigned char *_REG_RE_NAME (buffer);
458
/* Number of bytes to which `buffer' points. */
459
__re_long_size_t _REG_RE_NAME (allocated);
461
/* Number of bytes actually used in `buffer'. */
462
__re_long_size_t _REG_RE_NAME (used);
464
/* Syntax setting with which the pattern was compiled. */
465
reg_syntax_t _REG_RE_NAME (syntax);
467
/* Pointer to a fastmap, if any, otherwise zero. re_search uses the
468
fastmap, if there is one, to skip over impossible starting points
470
char *_REG_RE_NAME (fastmap);
472
/* Either a translate table to apply to all characters before
473
comparing them, or zero for no translation. The translation is
474
applied to a pattern when it is compiled and to a string when it
476
REG_TRANSLATE_TYPE _REG_RE_NAME (translate);
478
/* Number of subexpressions found by the compiler. */
481
/* Zero if this pattern cannot match the empty string, one else.
482
Well, in truth it's used only in `re_search_2', to see whether or
483
not we should use the fastmap, so we don't set this absolutely
484
perfectly; see `re_compile_fastmap' (the `duplicate' case). */
485
unsigned int _REG_RE_NAME (can_be_null) : 1;
487
/* If REGS_UNALLOCATED, allocate space in the `regs' structure
488
for `max (RE_NREGS, re_nsub + 1)' groups.
489
If REGS_REALLOCATE, reallocate space if necessary.
490
If REGS_FIXED, use what's there. */
491
#ifdef __USE_GNU_REGEX
492
# define REGS_UNALLOCATED 0
493
# define REGS_REALLOCATE 1
494
# define REGS_FIXED 2
496
unsigned int _REG_RE_NAME (regs_allocated) : 2;
498
/* Set to zero when `re_compile_pattern' compiles a pattern; set to
499
one by `re_compile_fastmap' if it updates the fastmap. */
500
unsigned int _REG_RE_NAME (fastmap_accurate) : 1;
502
/* If set, `re_match_2' does not return information about
504
unsigned int _REG_RE_NAME (no_sub) : 1;
506
/* If set, a beginning-of-line anchor doesn't match at the beginning
508
unsigned int _REG_RE_NAME (not_bol) : 1;
510
/* Similarly for an end-of-line anchor. */
511
unsigned int _REG_RE_NAME (not_eol) : 1;
513
/* If true, an anchor at a newline matches. */
514
unsigned int _REG_RE_NAME (newline_anchor) : 1;
516
/* [[[end pattern_buffer]]] */
519
typedef struct re_pattern_buffer regex_t;
521
/* This is the structure we store register match data in. See
522
regex.texinfo for a full description of what registers match. */
525
__re_size_t _REG_RM_NAME (num_regs);
526
regoff_t *_REG_RM_NAME (start);
527
regoff_t *_REG_RM_NAME (end);
531
/* If `regs_allocated' is REGS_UNALLOCATED in the pattern buffer,
532
`re_match_2' returns information about at least this many registers
533
the first time a `regs' structure is passed. */
534
#if !defined RE_NREGS && defined __USE_GNU_REGEX
539
/* POSIX specification for registers. Aside from the different names than
540
`re_registers', POSIX uses an array of structures, instead of a
541
structure of arrays. */
544
regoff_t rm_so; /* Byte offset from string's start to substring's start. */
545
regoff_t rm_eo; /* Byte offset from string's start to substring's end. */
548
/* Declarations for routines. */
550
/* Sets the current default syntax to SYNTAX, and return the old syntax.
551
You can also simply assign to the `re_syntax_options' variable. */
552
extern reg_syntax_t re_set_syntax (reg_syntax_t __syntax);
554
/* Compile the regular expression PATTERN, with length LENGTH
555
and syntax given by the global `re_syntax_options', into the buffer
556
BUFFER. Return NULL if successful, and an error string if not. */
557
extern const char *re_compile_pattern (const char *__pattern, size_t __length,
558
struct re_pattern_buffer *__buffer);
561
/* Compile a fastmap for the compiled pattern in BUFFER; used to
562
accelerate searches. Return 0 if successful and -2 if was an
564
extern int re_compile_fastmap (struct re_pattern_buffer *__buffer);
567
/* Search in the string STRING (with length LENGTH) for the pattern
568
compiled into BUFFER. Start searching at position START, for RANGE
569
characters. Return the starting position of the match, -1 for no
570
match, or -2 for an internal error. Also return register
571
information in REGS (if REGS and BUFFER->no_sub are nonzero). */
572
extern regoff_t re_search (struct re_pattern_buffer *__buffer,
573
const char *__string, __re_idx_t __length,
574
__re_idx_t __start, regoff_t __range,
575
struct re_registers *__regs);
578
/* Like `re_search', but search in the concatenation of STRING1 and
579
STRING2. Also, stop searching at index START + STOP. */
580
extern regoff_t re_search_2 (struct re_pattern_buffer *__buffer,
581
const char *__string1, __re_idx_t __length1,
582
const char *__string2, __re_idx_t __length2,
583
__re_idx_t __start, regoff_t __range,
584
struct re_registers *__regs,
588
/* Like `re_search', but return how many characters in STRING the regexp
589
in BUFFER matched, starting at position START. */
590
extern regoff_t re_match (struct re_pattern_buffer *__buffer,
591
const char *__string, __re_idx_t __length,
592
__re_idx_t __start, struct re_registers *__regs);
595
/* Relates to `re_match' as `re_search_2' relates to `re_search'. */
596
extern regoff_t re_match_2 (struct re_pattern_buffer *__buffer,
597
const char *__string1, __re_idx_t __length1,
598
const char *__string2, __re_idx_t __length2,
599
__re_idx_t __start, struct re_registers *__regs,
603
/* Set REGS to hold NUM_REGS registers, storing them in STARTS and
604
ENDS. Subsequent matches using BUFFER and REGS will use this memory
605
for recording register information. STARTS and ENDS must be
606
allocated with malloc, and must each be at least `NUM_REGS * sizeof
607
(regoff_t)' bytes long.
609
If NUM_REGS == 0, then subsequent matches should allocate their own
612
Unless this function is called, the first search or match using
613
BUFFER will allocate its own register data, without freeing the old
615
extern void re_set_registers (struct re_pattern_buffer *__buffer,
616
struct re_registers *__regs,
617
__re_size_t __num_regs,
618
regoff_t *__starts, regoff_t *__ends);
620
#if defined _REGEX_RE_COMP || defined _LIBC
622
/* 4.2 bsd compatibility. */
623
extern char *re_comp (const char *);
624
extern int re_exec (const char *);
628
/* GCC 2.95 and later have "__restrict"; C99 compilers have
629
"restrict", and "configure" may have defined "restrict".
630
Other compilers use __restrict, __restrict__, and _Restrict, and
631
'configure' might #define 'restrict' to those words, so pick a
634
# if 199901L <= __STDC_VERSION__
635
# define _Restrict_ restrict
636
# elif 2 < __GNUC__ || (2 == __GNUC__ && 95 <= __GNUC_MINOR__)
637
# define _Restrict_ __restrict
642
/* gcc 3.1 and up support the [restrict] syntax. Don't trust
643
sys/cdefs.h's definition of __restrict_arr, though, as it
644
mishandles gcc -ansi -pedantic. */
645
#ifndef _Restrict_arr_
646
# if ((199901L <= __STDC_VERSION__ \
647
|| ((3 < __GNUC__ || (3 == __GNUC__ && 1 <= __GNUC_MINOR__)) \
648
&& !__STRICT_ANSI__)) \
649
&& !defined __GNUG__)
650
# define _Restrict_arr_ _Restrict_
652
# define _Restrict_arr_
656
/* POSIX compatibility. */
657
extern int regcomp (regex_t *_Restrict_ __preg,
658
const char *_Restrict_ __pattern,
661
extern int regexec (const regex_t *_Restrict_ __preg,
662
const char *_Restrict_ __string, size_t __nmatch,
663
regmatch_t __pmatch[_Restrict_arr_],
666
extern size_t regerror (int __errcode, const regex_t *_Restrict_ __preg,
667
char *_Restrict_ __errbuf, size_t __errbuf_size);
669
extern void regfree (regex_t *__preg);
added
removed
grub-core/gnulib/regex.h
