2
* Copyright(c) 2007 Atheros Corporation. All rights reserved.
4
* Derived from Intel e1000 driver
5
* Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
7
* This program is free software; you can redistribute it and/or modify it
8
* under the terms of the GNU General Public License as published by the Free
9
* Software Foundation; either version 2 of the License, or (at your option)
12
* This program is distributed in the hope that it will be useful, but WITHOUT
13
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17
* You should have received a copy of the GNU General Public License along with
18
* this program; if not, write to the Free Software Foundation, Inc., 59
19
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
22
#include <linux/netdevice.h>
26
/* This is the only thing that needs to be changed to adjust the
27
* maximum number of ports that the driver can manage.
30
#define ATL1E_MAX_NIC 32
32
#define OPTION_UNSET -1
33
#define OPTION_DISABLED 0
34
#define OPTION_ENABLED 1
36
/* All parameters are treated the same, as an integer array of values.
37
* This macro just reduces the need to repeat the same declaration code
38
* over and over (plus this helps to avoid typo bugs).
40
#define ATL1E_PARAM_INIT { [0 ... ATL1E_MAX_NIC] = OPTION_UNSET }
42
#define ATL1E_PARAM(x, desc) \
43
static int __devinitdata x[ATL1E_MAX_NIC + 1] = ATL1E_PARAM_INIT; \
44
static unsigned int num_##x; \
45
module_param_array_named(x, x, int, &num_##x, 0); \
46
MODULE_PARM_DESC(x, desc);
48
/* Transmit Memory count
50
* Valid Range: 64-2048
54
#define ATL1E_MIN_TX_DESC_CNT 32
55
#define ATL1E_MAX_TX_DESC_CNT 1020
56
#define ATL1E_DEFAULT_TX_DESC_CNT 128
57
ATL1E_PARAM(tx_desc_cnt, "Transmit description count");
59
/* Receive Memory Block Count
65
#define ATL1E_MIN_RX_MEM_SIZE 8 /* 8KB */
66
#define ATL1E_MAX_RX_MEM_SIZE 1024 /* 1MB */
67
#define ATL1E_DEFAULT_RX_MEM_SIZE 256 /* 128KB */
68
ATL1E_PARAM(rx_mem_size, "memory size of rx buffer(KB)");
70
/* User Specified MediaType Override
73
* - 0 - auto-negotiate at all supported speeds
74
* - 1 - only link at 100Mbps Full Duplex
75
* - 2 - only link at 100Mbps Half Duplex
76
* - 3 - only link at 10Mbps Full Duplex
77
* - 4 - only link at 10Mbps Half Duplex
81
ATL1E_PARAM(media_type, "MediaType Select");
83
/* Interrupt Moderate Timer in units of 2 us
85
* Valid Range: 10-65535
87
* Default Value: 45000(90ms)
89
#define INT_MOD_DEFAULT_CNT 100 /* 200us */
90
#define INT_MOD_MAX_CNT 65000
91
#define INT_MOD_MIN_CNT 50
92
ATL1E_PARAM(int_mod_timer, "Interrupt Moderator Timer");
94
#define AUTONEG_ADV_DEFAULT 0x2F
95
#define AUTONEG_ADV_MASK 0x2F
96
#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
98
#define FLASH_VENDOR_DEFAULT 0
99
#define FLASH_VENDOR_MIN 0
100
#define FLASH_VENDOR_MAX 2
102
struct atl1e_option {
103
enum { enable_option, range_option, list_option } type;
108
struct { /* range_option info */
112
struct { /* list_option info */
114
struct atl1e_opt_list { int i; char *str; } *p;
119
static int __devinit atl1e_validate_option(int *value, struct atl1e_option *opt, struct atl1e_adapter *adapter)
121
if (*value == OPTION_UNSET) {
130
netdev_info(adapter->netdev,
131
"%s Enabled\n", opt->name);
133
case OPTION_DISABLED:
134
netdev_info(adapter->netdev,
135
"%s Disabled\n", opt->name);
140
if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
141
netdev_info(adapter->netdev, "%s set to %i\n",
148
struct atl1e_opt_list *ent;
150
for (i = 0; i < opt->arg.l.nr; i++) {
151
ent = &opt->arg.l.p[i];
152
if (*value == ent->i) {
153
if (ent->str[0] != '\0')
154
netdev_info(adapter->netdev,
165
netdev_info(adapter->netdev, "Invalid %s specified (%i) %s\n",
166
opt->name, *value, opt->err);
172
* atl1e_check_options - Range Checking for Command Line Parameters
173
* @adapter: board private structure
175
* This routine checks all command line parameters for valid user
176
* input. If an invalid value is given, or if no user specified
177
* value exists, a default value is used. The final value is stored
178
* in a variable in the adapter structure.
180
void __devinit atl1e_check_options(struct atl1e_adapter *adapter)
182
int bd = adapter->bd_number;
184
if (bd >= ATL1E_MAX_NIC) {
185
netdev_notice(adapter->netdev,
186
"no configuration for board #%i\n", bd);
187
netdev_notice(adapter->netdev,
188
"Using defaults for all values\n");
191
{ /* Transmit Ring Size */
192
struct atl1e_option opt = {
193
.type = range_option,
194
.name = "Transmit Ddescription Count",
195
.err = "using default of "
196
__MODULE_STRING(ATL1E_DEFAULT_TX_DESC_CNT),
197
.def = ATL1E_DEFAULT_TX_DESC_CNT,
198
.arg = { .r = { .min = ATL1E_MIN_TX_DESC_CNT,
199
.max = ATL1E_MAX_TX_DESC_CNT} }
202
if (num_tx_desc_cnt > bd) {
203
val = tx_desc_cnt[bd];
204
atl1e_validate_option(&val, &opt, adapter);
205
adapter->tx_ring.count = (u16) val & 0xFFFC;
207
adapter->tx_ring.count = (u16)opt.def;
210
{ /* Receive Memory Block Count */
211
struct atl1e_option opt = {
212
.type = range_option,
213
.name = "Memory size of rx buffer(KB)",
214
.err = "using default of "
215
__MODULE_STRING(ATL1E_DEFAULT_RX_MEM_SIZE),
216
.def = ATL1E_DEFAULT_RX_MEM_SIZE,
217
.arg = { .r = { .min = ATL1E_MIN_RX_MEM_SIZE,
218
.max = ATL1E_MAX_RX_MEM_SIZE} }
221
if (num_rx_mem_size > bd) {
222
val = rx_mem_size[bd];
223
atl1e_validate_option(&val, &opt, adapter);
224
adapter->rx_ring.page_size = (u32)val * 1024;
226
adapter->rx_ring.page_size = (u32)opt.def * 1024;
230
{ /* Interrupt Moderate Timer */
231
struct atl1e_option opt = {
232
.type = range_option,
233
.name = "Interrupt Moderate Timer",
234
.err = "using default of "
235
__MODULE_STRING(INT_MOD_DEFAULT_CNT),
236
.def = INT_MOD_DEFAULT_CNT,
237
.arg = { .r = { .min = INT_MOD_MIN_CNT,
238
.max = INT_MOD_MAX_CNT} }
241
if (num_int_mod_timer > bd) {
242
val = int_mod_timer[bd];
243
atl1e_validate_option(&val, &opt, adapter);
244
adapter->hw.imt = (u16) val;
246
adapter->hw.imt = (u16)(opt.def);
250
struct atl1e_option opt = {
251
.type = range_option,
252
.name = "Speed/Duplex Selection",
253
.err = "using default of "
254
__MODULE_STRING(MEDIA_TYPE_AUTO_SENSOR),
255
.def = MEDIA_TYPE_AUTO_SENSOR,
256
.arg = { .r = { .min = MEDIA_TYPE_AUTO_SENSOR,
257
.max = MEDIA_TYPE_10M_HALF} }
260
if (num_media_type > bd) {
261
val = media_type[bd];
262
atl1e_validate_option(&val, &opt, adapter);
263
adapter->hw.media_type = (u16) val;
265
adapter->hw.media_type = (u16)(opt.def);