1
==============================
2
Fusion-MPT MPI 2.0 Header File Change History
3
==============================
5
Copyright (c) 2000-2010 LSI Corporation.
7
---------------------------------------
8
Header Set Release Version: 02.00.14
9
Header Set Release Date: 10-28-09
10
---------------------------------------
12
Filename Current version Prior version
13
---------- --------------- -------------
14
mpi2.h 02.00.14 02.00.13
15
mpi2_cnfg.h 02.00.13 02.00.12
16
mpi2_init.h 02.00.08 02.00.07
17
mpi2_ioc.h 02.00.13 02.00.12
18
mpi2_raid.h 02.00.04 02.00.04
19
mpi2_sas.h 02.00.03 02.00.02
20
mpi2_targ.h 02.00.03 02.00.03
21
mpi2_tool.h 02.00.04 02.00.04
22
mpi2_type.h 02.00.00 02.00.00
23
mpi2_ra.h 02.00.00 02.00.00
25
mpi2_history.txt 02.00.14 02.00.13
28
* Date Version Description
29
* -------- -------- ------------------------------------------------------
32
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
33
* 06-04-07 02.00.01 Bumped MPI2_HEADER_VERSION_UNIT.
34
* 06-26-07 02.00.02 Bumped MPI2_HEADER_VERSION_UNIT.
35
* 08-31-07 02.00.03 Bumped MPI2_HEADER_VERSION_UNIT.
36
* Moved ReplyPostHostIndex register to offset 0x6C of the
37
* MPI2_SYSTEM_INTERFACE_REGS and modified the define for
38
* MPI2_REPLY_POST_HOST_INDEX_OFFSET.
39
* Added union of request descriptors.
40
* Added union of reply descriptors.
41
* 10-31-07 02.00.04 Bumped MPI2_HEADER_VERSION_UNIT.
42
* Added define for MPI2_VERSION_02_00.
43
* Fixed the size of the FunctionDependent5 field in the
44
* MPI2_DEFAULT_REPLY structure.
45
* 12-18-07 02.00.05 Bumped MPI2_HEADER_VERSION_UNIT.
46
* Removed the MPI-defined Fault Codes and extended the
47
* product specific codes up to 0xEFFF.
48
* Added a sixth key value for the WriteSequence register
49
* and changed the flush value to 0x0.
50
* Added message function codes for Diagnostic Buffer Post
51
* and Diagnsotic Release.
52
* New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED
53
* Moved MPI2_VERSION_UNION from mpi2_ioc.h.
54
* 02-29-08 02.00.06 Bumped MPI2_HEADER_VERSION_UNIT.
55
* 03-03-08 02.00.07 Bumped MPI2_HEADER_VERSION_UNIT.
56
* 05-21-08 02.00.08 Bumped MPI2_HEADER_VERSION_UNIT.
57
* Added #defines for marking a reply descriptor as unused.
58
* 06-27-08 02.00.09 Bumped MPI2_HEADER_VERSION_UNIT.
59
* 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT.
60
* Moved LUN field defines from mpi2_init.h.
61
* 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT.
62
* 05-06-09 02.00.12 Bumped MPI2_HEADER_VERSION_UNIT.
63
* In all request and reply descriptors, replaced VF_ID
64
* field with MSIxIndex field.
65
* Removed DevHandle field from
66
* MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those
68
* Added RAID Accelerator functionality.
69
* 07-30-09 02.00.13 Bumped MPI2_HEADER_VERSION_UNIT.
70
* 10-28-09 02.00.14 Bumped MPI2_HEADER_VERSION_UNIT.
71
* Added MSI-x index mask and shift for Reply Post Host
73
* Added function code for Host Based Discovery Action.
74
* --------------------------------------------------------------------------
77
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
78
* 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags.
79
* Added Manufacturing Page 11.
80
* Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE
82
* 06-26-07 02.00.02 Adding generic structure for product-specific
83
* Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS.
84
* Rework of BIOS Page 2 configuration page.
85
* Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the
87
* Added configuration pages IOC Page 8 and Driver
88
* Persistent Mapping Page 0.
89
* 08-31-07 02.00.03 Modified configuration pages dealing with Integrated
90
* RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1,
91
* RAID Physical Disk Pages 0 and 1, RAID Configuration
93
* Added new value for AccessStatus field of SAS Device
94
* Page 0 (_SATA_NEEDS_INITIALIZATION).
95
* 10-31-07 02.00.04 Added missing SEPDevHandle field to
96
* MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
97
* 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for
99
* Modified IOC Page 7 to use masks and added field for
100
* SASBroadcastPrimitiveMasks.
101
* Added MPI2_CONFIG_PAGE_BIOS_4.
102
* Added MPI2_CONFIG_PAGE_LOG_0.
103
* 02-29-08 02.00.06 Modified various names to make them 32-character unique.
104
* Added SAS Device IDs.
105
* Updated Integrated RAID configuration pages including
106
* Manufacturing Page 4, IOC Page 6, and RAID Configuration
108
* 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA.
109
* Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION.
110
* Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING.
111
* Added missing MaxNumRoutedSasAddresses field to
112
* MPI2_CONFIG_PAGE_EXPANDER_0.
113
* Added SAS Port Page 0.
114
* Modified structure layout for
115
* MPI2_CONFIG_PAGE_DRIVER_MAPPING_0.
116
* 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use
117
* MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array.
118
* 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF
120
* Added two new values for the Physical Disk Coercion Size
121
* bits in the Flags field of Manufacturing Page 4.
122
* Added product-specific Manufacturing pages 16 to 31.
123
* Modified Flags bits for controlling write cache on SATA
124
* drives in IO Unit Page 1.
125
* Added new bit to AdditionalControlFlags of SAS IO Unit
126
* Page 1 to control Invalid Topology Correction.
127
* Added SupportedPhysDisks field to RAID Volume Page 1 and
128
* added related defines.
129
* Added additional defines for RAID Volume Page 0
130
* VolumeStatusFlags field.
131
* Modified meaning of RAID Volume Page 0 VolumeSettings
132
* define for auto-configure of hot-swap drives.
133
* Added PhysDiskAttributes field (and related defines) to
134
* RAID Physical Disk Page 0.
135
* Added MPI2_SAS_PHYINFO_PHY_VACANT define.
136
* Added three new DiscoveryStatus bits for SAS IO Unit
137
* Page 0 and SAS Expander Page 0.
138
* Removed multiplexing information from SAS IO Unit pages.
139
* Added BootDeviceWaitTime field to SAS IO Unit Page 4.
140
* Removed Zone Address Resolved bit from PhyInfo and from
141
* Expander Page 0 Flags field.
142
* Added two new AccessStatus values to SAS Device Page 0
143
* for indicating routing problems. Added 3 reserved words
145
* 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3.
146
* Inserted missing reserved field into structure for IOC
148
* Added more pending task bits to RAID Volume Page 0
149
* VolumeStatusFlags defines.
150
* Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define.
151
* Added a new DiscoveryStatus bit for SAS IO Unit Page 0
152
* and SAS Expander Page 0 to flag a downstream initiator
153
* when in simplified routing mode.
154
* Removed SATA Init Failure defines for DiscoveryStatus
155
* fields of SAS IO Unit Page 0 and SAS Expander Page 0.
156
* Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
157
* Added PortGroups, DmaGroup, and ControlGroup fields to
159
* 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO
161
* Added expander reduced functionality data to SAS
163
* Added SAS PHY Page 2 and SAS PHY Page 3.
164
* 07-30-09 02.00.12 Added IO Unit Page 7.
165
* Added new device ids.
166
* Added SAS IO Unit Page 5.
167
* Added partial and slumber power management capable flags
168
* to SAS Device Page 0 Flags field.
169
* Added PhyInfo defines for power condition.
170
* Added Ethernet configuration pages.
171
* 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
172
* Added SAS PHY Page 4 structure and defines.
173
* --------------------------------------------------------------------------
176
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
177
* 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t.
178
* 12-18-07 02.00.02 Modified Task Management Target Reset Method defines.
179
* 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention.
180
* 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY.
181
* 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t.
182
* 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO
183
* Control field Task Attribute flags.
184
* Moved LUN field defines to mpi2.h becasue they are
185
* common to many structures.
186
* 05-06-09 02.00.07 Changed task management type of Query Unit Attention to
187
* Query Asynchronous Event.
188
* Defined two new bits in the SlotStatus field of the SCSI
189
* Enclosure Processor Request and Reply.
190
* 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for
191
* both SCSI IO Error Reply and SCSI Task Management Reply.
192
* Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY.
193
* Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define.
194
* --------------------------------------------------------------------------
197
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
198
* 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to
200
* Added TotalImageSize field to FWDownload Request.
201
* Added reserved words to FWUpload Request.
202
* 06-26-07 02.00.02 Added IR Configuration Change List Event.
203
* 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit
204
* request and replaced it with
205
* ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth.
206
* Replaced the MinReplyQueueDepth field of the IOCFacts
207
* reply with MaxReplyDescriptorPostQueueDepth.
208
* Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum
209
* depth for the Reply Descriptor Post Queue.
210
* Added SASAddress field to Initiator Device Table
211
* Overflow Event data.
212
* 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING
213
* for SAS Initiator Device Status Change Event data.
214
* Modified Reason Code defines for SAS Topology Change
215
* List Event data, including adding a bit for PHY Vacant
216
* status, and adding a mask for the Reason Code.
218
* MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING.
219
* Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID.
220
* 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of
221
* the IOCFacts Reply.
222
* Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
223
* Moved MPI2_VERSION_UNION to mpi2.h.
224
* Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks
225
* instead of enables, and added SASBroadcastPrimitiveMasks
227
* Added Log Entry Added Event and related structure.
228
* 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID.
229
* Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET.
230
* Added MaxVolumes and MaxPersistentEntries fields to
232
* Added ProtocalFlags and IOCCapabilities fields to
233
* MPI2_FW_IMAGE_HEADER.
234
* Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT.
235
* 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to
236
* a U16 (from a U32).
237
* Removed extra 's' from EventMasks name.
238
* 06-27-08 02.00.08 Fixed an offset in a comment.
239
* 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST.
240
* Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and
241
* renamed MinReplyFrameSize to ReplyFrameSize.
242
* Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX.
243
* Added two new RAIDOperation values for Integrated RAID
244
* Operations Status Event data.
245
* Added four new IR Configuration Change List Event data
247
* Added two new ReasonCode defines for SAS Device Status
249
* Added three new DiscoveryStatus bits for the SAS
250
* Discovery event data.
251
* Added Multiplexing Status Change bit to the PhyStatus
252
* field of the SAS Topology Change List event data.
253
* Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY.
254
* BootFlags are now product-specific.
255
* Added defines for the indivdual signature bytes
256
* for MPI2_INIT_IMAGE_FOOTER.
257
* 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define.
258
* Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR
260
* Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
262
* Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define.
263
* 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
264
* Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
265
* Added two new reason codes for SAS Device Status Change
267
* Added new event: SAS PHY Counter.
268
* 07-30-09 02.00.12 Added GPIO Interrupt event define and structure.
269
* Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
270
* Added new product id family for 2208.
271
* 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST.
272
* Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY.
273
* Added MinDevHandle field to MPI2_IOC_FACTS_REPLY.
274
* Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY.
275
* Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define.
276
* Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define.
277
* Added Host Based Discovery Phy Event data.
278
* Added defines for ProductID Product field
279
* (MPI2_FW_HEADER_PID_).
280
* Modified values for SAS ProductID Family
281
* (MPI2_FW_HEADER_PID_FAMILY_).
282
* --------------------------------------------------------------------------
285
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
286
* 08-31-07 02.00.01 Modifications to RAID Action request and reply,
287
* including the Actions and ActionData.
288
* 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD.
289
* 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that
290
* the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT
291
* can be sized by the build environment.
292
* 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of
293
* VolumeCreationFlags and marked the old one as obsolete.
294
* 05-12-10 02.00.05 Added MPI2_RAID_VOL_FLAGS_OP_MDC define.
295
* --------------------------------------------------------------------------
298
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
299
* 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit
301
* 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control
303
* 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
304
* to MPI2_SGE_IO_UNION since it supports chained SGLs.
305
* 05-12-10 02.00.04 Modified some comments.
306
* --------------------------------------------------------------------------
309
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
310
* 08-31-07 02.00.01 Added Command Buffer Data Location Address Space bits to
311
* BufferPostFlags field of CommandBufferPostBase Request.
312
* 02-29-08 02.00.02 Modified various names to make them 32-character unique.
313
* 10-02-08 02.00.03 Removed NextCmdBufferOffset from
314
* MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST.
315
* Target Status Send Request only takes a single SGE for
317
* --------------------------------------------------------------------------
320
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
321
* 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release
322
* structures and defines.
323
* 02-29-08 02.00.02 Modified various names to make them 32-character unique.
324
* 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool.
325
* 07-30-09 02.00.04 Added ExtendedType field to DiagnosticBufferPost request
326
* and reply messages.
327
* Added MPI2_DIAG_BUF_TYPE_EXTENDED.
328
* Incremented MPI2_DIAG_BUF_TYPE_COUNT.
329
* 05-12-10 02.00.05 Added Diagnostic Data Upload tool.
330
* --------------------------------------------------------------------------
333
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
334
* --------------------------------------------------------------------------
337
* 05-06-09 02.00.00 Initial version.
338
* --------------------------------------------------------------------------
341
* 10-28-09 02.00.00 Initial version.
342
* --------------------------------------------------------------------------
345
mpi2_history.txt Parts list history
347
Filename 02.00.14 02.00.13 02.00.12
348
---------- -------- -------- --------
349
mpi2.h 02.00.14 02.00.13 02.00.12
350
mpi2_cnfg.h 02.00.13 02.00.12 02.00.11
351
mpi2_init.h 02.00.08 02.00.07 02.00.07
352
mpi2_ioc.h 02.00.13 02.00.12 02.00.11
353
mpi2_raid.h 02.00.04 02.00.04 02.00.03
354
mpi2_sas.h 02.00.03 02.00.02 02.00.02
355
mpi2_targ.h 02.00.03 02.00.03 02.00.03
356
mpi2_tool.h 02.00.04 02.00.04 02.00.03
357
mpi2_type.h 02.00.00 02.00.00 02.00.00
358
mpi2_ra.h 02.00.00 02.00.00 02.00.00
361
Filename 02.00.11 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06
362
---------- -------- -------- -------- -------- -------- --------
363
mpi2.h 02.00.11 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06
364
mpi2_cnfg.h 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06 02.00.06
365
mpi2_init.h 02.00.06 02.00.06 02.00.05 02.00.05 02.00.04 02.00.03
366
mpi2_ioc.h 02.00.10 02.00.09 02.00.08 02.00.07 02.00.07 02.00.06
367
mpi2_raid.h 02.00.03 02.00.03 02.00.03 02.00.03 02.00.02 02.00.02
368
mpi2_sas.h 02.00.02 02.00.02 02.00.01 02.00.01 02.00.01 02.00.01
369
mpi2_targ.h 02.00.03 02.00.03 02.00.02 02.00.02 02.00.02 02.00.02
370
mpi2_tool.h 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02
371
mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00
373
Filename 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00
374
---------- -------- -------- -------- -------- -------- --------
375
mpi2.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00
376
mpi2_cnfg.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00
377
mpi2_init.h 02.00.02 02.00.01 02.00.00 02.00.00 02.00.00 02.00.00
378
mpi2_ioc.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00
379
mpi2_raid.h 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 02.00.00
380
mpi2_sas.h 02.00.01 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00
381
mpi2_targ.h 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 02.00.00
382
mpi2_tool.h 02.00.01 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00
383
mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00