1
/* linux/include/asm/hardware/pl330.h
3
* Copyright (C) 2010 Samsung Electronics Co. Ltd.
4
* Jaswinder Singh <jassi.brar@samsung.com>
6
* This program is free software; you can redistribute it and/or modify
7
* it under the terms of the GNU General Public License as published by
8
* the Free Software Foundation; either version 2 of the License, or
9
* (at your option) any later version.
11
* This program is distributed in the hope that it will be useful,
12
* but WITHOUT ANY WARRANTY; without even the implied warranty of
13
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14
* GNU General Public License for more details.
16
* You should have received a copy of the GNU General Public License
17
* along with this program; if not, write to the Free Software
18
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21
#ifndef __PL330_CORE_H
22
#define __PL330_CORE_H
24
#define PL330_MAX_CHAN 8
25
#define PL330_MAX_IRQS 32
26
#define PL330_MAX_PERI 32
28
enum pl330_srccachectrl {
29
SCCTRL0 = 0, /* Noncacheable and nonbufferable */
30
SCCTRL1, /* Bufferable only */
31
SCCTRL2, /* Cacheable, but do not allocate */
32
SCCTRL3, /* Cacheable and bufferable, but do not allocate */
35
SCCTRL6, /* Cacheable write-through, allocate on reads only */
36
SCCTRL7, /* Cacheable write-back, allocate on reads only */
39
enum pl330_dstcachectrl {
40
DCCTRL0 = 0, /* Noncacheable and nonbufferable */
41
DCCTRL1, /* Bufferable only */
42
DCCTRL2, /* Cacheable, but do not allocate */
43
DCCTRL3, /* Cacheable and bufferable, but do not allocate */
46
DCCTRL6, /* Cacheable write-through, allocate on writes only */
47
DCCTRL7, /* Cacheable write-back, allocate on writes only */
50
/* Populated by the PL330 core driver for DMA API driver's info */
54
#define DMAC_MODE_NS (1 << 0)
56
unsigned int data_bus_width:10; /* In number of bits */
57
unsigned int data_buf_dep:10;
58
unsigned int num_chan:4;
59
unsigned int num_peri:6;
61
unsigned int num_events:6;
65
/* Handle to the DMAC provided to the PL330 core */
69
/* Size of MicroCode buffers for each channel. */
71
/* ioremap'ed address of PL330 registers. */
73
/* Client can freely use it. */
75
/* PL330 core data, Client must not touch it. */
77
/* Populated by the PL330 core driver during pl330_add */
78
struct pl330_config pcfg;
80
* If the DMAC has some reset mechanism, then the
81
* client may want to provide pointer to the method.
83
void (*dmac_reset)(struct pl330_info *pi);
95
* Request Configuration.
96
* The PL330 core does not modify this and uses the last
97
* working configuration if the request doesn't provide any.
99
* The Client may want to provide this info only for the
100
* first request and a request with new settings.
102
struct pl330_reqcfg {
103
/* Address Incrementing */
108
* For now, the SRC & DST protection levels
109
* and burst size/length are assumed same.
115
unsigned brst_size:3; /* in power of 2 */
117
enum pl330_dstcachectrl dcctl;
118
enum pl330_srccachectrl scctl;
119
enum pl330_byteswap swap;
123
* One cycle of DMAC operation.
124
* There may be more than one xfer in a request.
132
* Pointer to next xfer in the list.
133
* The last xfer in the req must point to NULL.
135
struct pl330_xfer *next;
138
/* The xfer callbacks are made with one of these arguments. */
140
/* The all xfers in the request were success. */
142
/* If req aborted due to global error. */
144
/* If req failed due to problem with Channel. */
155
/* A request defining Scatter-Gather List ending with NULL xfer. */
157
enum pl330_reqtype rqtype;
158
/* Index of peripheral for the xfer. */
160
/* Unique token for this xfer, set by the client. */
162
/* Callback to be called after xfer. */
163
void (*xfer_cb)(void *token, enum pl330_op_err err);
164
/* If NULL, req will be done at last set parameters. */
165
struct pl330_reqcfg *cfg;
166
/* Pointer to first xfer in the request. */
167
struct pl330_xfer *x;
171
* To know the status of the channel and DMAC, the client
172
* provides a pointer to this structure. The PL330 core
173
* fills it with current information.
175
struct pl330_chanstatus {
177
* If the DMAC engine halted due to some error,
178
* the client should remove-add DMAC.
182
* If channel is halted due to some error,
183
* the client should ABORT/FLUSH and START the channel.
186
/* Location of last load */
188
/* Location of last store */
191
* Pointer to the currently active req, NULL if channel is
192
* inactive, even though the requests may be present.
194
struct pl330_req *top_req;
195
/* Pointer to req waiting second in the queue if any. */
196
struct pl330_req *wait_req;
200
/* Start the channel */
202
/* Abort the active xfer */
204
/* Stop xfer and flush queue */
208
extern int pl330_add(struct pl330_info *);
209
extern void pl330_del(struct pl330_info *pi);
210
extern int pl330_update(const struct pl330_info *pi);
211
extern void pl330_release_channel(void *ch_id);
212
extern void *pl330_request_channel(const struct pl330_info *pi);
213
extern int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus);
214
extern int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op);
215
extern int pl330_submit_req(void *ch_id, struct pl330_req *r);
217
#endif /* __PL330_CORE_H */