4
* Copyright (C) 1994-1996, Thomas G. Lane.
5
* Modified 2002-2010 by Guido Vollbeding.
6
* This file is part of the Independent JPEG Group's software.
7
* For conditions of distribution and use, see the accompanying README file.
9
* This file contains the inverse-DCT management logic.
10
* This code selects a particular IDCT implementation to be used,
11
* and it performs related housekeeping chores. No code in this file
12
* is executed per IDCT step, only during output pass setup.
14
* Note that the IDCT routines are responsible for performing coefficient
15
* dequantization as well as the IDCT proper. This module sets up the
16
* dequantization multiplier table needed by the IDCT routine.
19
#define JPEG_INTERNALS
22
#include "jdct.h" /* Private declarations for DCT subsystem */
26
* The decompressor input side (jdinput.c) saves away the appropriate
27
* quantization table for each component at the start of the first scan
28
* involving that component. (This is necessary in order to correctly
29
* decode files that reuse Q-table slots.)
30
* When we are ready to make an output pass, the saved Q-table is converted
31
* to a multiplier table that will actually be used by the IDCT routine.
32
* The multiplier table contents are IDCT-method-dependent. To support
33
* application changes in IDCT method between scans, we can remake the
34
* multiplier tables if necessary.
35
* In buffered-image mode, the first output pass may occur before any data
36
* has been seen for some components, and thus before their Q-tables have
37
* been saved away. To handle this case, multiplier tables are preset
38
* to zeroes; the result of the IDCT will be a neutral gray level.
42
/* Private subobject for this module */
45
struct jpeg_inverse_dct pub; /* public fields */
47
/* This array contains the IDCT method code that each multiplier table
48
* is currently set up for, or -1 if it's not yet set up.
49
* The actual multiplier tables are pointed to by dct_table in the
50
* per-component comp_info structures.
52
int cur_method[MAX_COMPONENTS];
55
typedef my_idct_controller * my_idct_ptr;
58
/* Allocated multiplier tables: big enough for any supported variant */
61
ISLOW_MULT_TYPE islow_array[DCTSIZE2];
62
#ifdef DCT_IFAST_SUPPORTED
63
IFAST_MULT_TYPE ifast_array[DCTSIZE2];
65
#ifdef DCT_FLOAT_SUPPORTED
66
FLOAT_MULT_TYPE float_array[DCTSIZE2];
71
/* The current scaled-IDCT routines require ISLOW-style multiplier tables,
72
* so be sure to compile that code if either ISLOW or SCALING is requested.
74
#ifdef DCT_ISLOW_SUPPORTED
75
#define PROVIDE_ISLOW_TABLES
77
#ifdef IDCT_SCALING_SUPPORTED
78
#define PROVIDE_ISLOW_TABLES
84
* Prepare for an output pass.
85
* Here we select the proper IDCT routine for each component and build
86
* a matching multiplier table.
90
start_pass (j_decompress_ptr cinfo)
92
my_idct_ptr idct = (my_idct_ptr) cinfo->idct;
94
jpeg_component_info *compptr;
96
inverse_DCT_method_ptr method_ptr = NULL;
99
for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
101
/* Select the proper IDCT routine for this component's scaling */
102
switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) {
103
#ifdef IDCT_SCALING_SUPPORTED
105
method_ptr = jpeg_idct_1x1;
106
method = JDCT_ISLOW; /* jidctint uses islow-style table */
109
method_ptr = jpeg_idct_2x2;
110
method = JDCT_ISLOW; /* jidctint uses islow-style table */
113
method_ptr = jpeg_idct_3x3;
114
method = JDCT_ISLOW; /* jidctint uses islow-style table */
117
method_ptr = jpeg_idct_4x4;
118
method = JDCT_ISLOW; /* jidctint uses islow-style table */
121
method_ptr = jpeg_idct_5x5;
122
method = JDCT_ISLOW; /* jidctint uses islow-style table */
125
method_ptr = jpeg_idct_6x6;
126
method = JDCT_ISLOW; /* jidctint uses islow-style table */
129
method_ptr = jpeg_idct_7x7;
130
method = JDCT_ISLOW; /* jidctint uses islow-style table */
133
method_ptr = jpeg_idct_9x9;
134
method = JDCT_ISLOW; /* jidctint uses islow-style table */
136
case ((10 << 8) + 10):
137
method_ptr = jpeg_idct_10x10;
138
method = JDCT_ISLOW; /* jidctint uses islow-style table */
140
case ((11 << 8) + 11):
141
method_ptr = jpeg_idct_11x11;
142
method = JDCT_ISLOW; /* jidctint uses islow-style table */
144
case ((12 << 8) + 12):
145
method_ptr = jpeg_idct_12x12;
146
method = JDCT_ISLOW; /* jidctint uses islow-style table */
148
case ((13 << 8) + 13):
149
method_ptr = jpeg_idct_13x13;
150
method = JDCT_ISLOW; /* jidctint uses islow-style table */
152
case ((14 << 8) + 14):
153
method_ptr = jpeg_idct_14x14;
154
method = JDCT_ISLOW; /* jidctint uses islow-style table */
156
case ((15 << 8) + 15):
157
method_ptr = jpeg_idct_15x15;
158
method = JDCT_ISLOW; /* jidctint uses islow-style table */
160
case ((16 << 8) + 16):
161
method_ptr = jpeg_idct_16x16;
162
method = JDCT_ISLOW; /* jidctint uses islow-style table */
164
case ((16 << 8) + 8):
165
method_ptr = jpeg_idct_16x8;
166
method = JDCT_ISLOW; /* jidctint uses islow-style table */
168
case ((14 << 8) + 7):
169
method_ptr = jpeg_idct_14x7;
170
method = JDCT_ISLOW; /* jidctint uses islow-style table */
172
case ((12 << 8) + 6):
173
method_ptr = jpeg_idct_12x6;
174
method = JDCT_ISLOW; /* jidctint uses islow-style table */
176
case ((10 << 8) + 5):
177
method_ptr = jpeg_idct_10x5;
178
method = JDCT_ISLOW; /* jidctint uses islow-style table */
181
method_ptr = jpeg_idct_8x4;
182
method = JDCT_ISLOW; /* jidctint uses islow-style table */
185
method_ptr = jpeg_idct_6x3;
186
method = JDCT_ISLOW; /* jidctint uses islow-style table */
189
method_ptr = jpeg_idct_4x2;
190
method = JDCT_ISLOW; /* jidctint uses islow-style table */
193
method_ptr = jpeg_idct_2x1;
194
method = JDCT_ISLOW; /* jidctint uses islow-style table */
196
case ((8 << 8) + 16):
197
method_ptr = jpeg_idct_8x16;
198
method = JDCT_ISLOW; /* jidctint uses islow-style table */
200
case ((7 << 8) + 14):
201
method_ptr = jpeg_idct_7x14;
202
method = JDCT_ISLOW; /* jidctint uses islow-style table */
204
case ((6 << 8) + 12):
205
method_ptr = jpeg_idct_6x12;
206
method = JDCT_ISLOW; /* jidctint uses islow-style table */
208
case ((5 << 8) + 10):
209
method_ptr = jpeg_idct_5x10;
210
method = JDCT_ISLOW; /* jidctint uses islow-style table */
213
method_ptr = jpeg_idct_4x8;
214
method = JDCT_ISLOW; /* jidctint uses islow-style table */
217
method_ptr = jpeg_idct_3x6;
218
method = JDCT_ISLOW; /* jidctint uses islow-style table */
221
method_ptr = jpeg_idct_2x4;
222
method = JDCT_ISLOW; /* jidctint uses islow-style table */
225
method_ptr = jpeg_idct_1x2;
226
method = JDCT_ISLOW; /* jidctint uses islow-style table */
229
case ((DCTSIZE << 8) + DCTSIZE):
230
switch (cinfo->dct_method) {
231
#ifdef DCT_ISLOW_SUPPORTED
233
method_ptr = jpeg_idct_islow;
237
#ifdef DCT_IFAST_SUPPORTED
239
method_ptr = jpeg_idct_ifast;
243
#ifdef DCT_FLOAT_SUPPORTED
245
method_ptr = jpeg_idct_float;
250
ERREXIT(cinfo, JERR_NOT_COMPILED);
255
ERREXIT2(cinfo, JERR_BAD_DCTSIZE,
256
compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size);
259
idct->pub.inverse_DCT[ci] = method_ptr;
260
/* Create multiplier table from quant table.
261
* However, we can skip this if the component is uninteresting
262
* or if we already built the table. Also, if no quant table
263
* has yet been saved for the component, we leave the
264
* multiplier table all-zero; we'll be reading zeroes from the
265
* coefficient controller's buffer anyway.
267
if (! compptr->component_needed || idct->cur_method[ci] == method)
269
qtbl = compptr->quant_table;
270
if (qtbl == NULL) /* happens if no data yet for component */
272
idct->cur_method[ci] = method;
274
#ifdef PROVIDE_ISLOW_TABLES
277
/* For LL&M IDCT method, multipliers are equal to raw quantization
278
* coefficients, but are stored as ints to ensure access efficiency.
280
ISLOW_MULT_TYPE * ismtbl = (ISLOW_MULT_TYPE *) compptr->dct_table;
281
for (i = 0; i < DCTSIZE2; i++) {
282
ismtbl[i] = (ISLOW_MULT_TYPE) qtbl->quantval[i];
287
#ifdef DCT_IFAST_SUPPORTED
290
/* For AA&N IDCT method, multipliers are equal to quantization
291
* coefficients scaled by scalefactor[row]*scalefactor[col], where
293
* scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7
294
* For integer operation, the multiplier table is to be scaled by
297
IFAST_MULT_TYPE * ifmtbl = (IFAST_MULT_TYPE *) compptr->dct_table;
298
#define CONST_BITS 14
299
static const INT16 aanscales[DCTSIZE2] = {
300
/* precomputed values scaled up by 14 bits */
301
16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520,
302
22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270,
303
21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906,
304
19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315,
305
16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520,
306
12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552,
307
8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446,
308
4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247
312
for (i = 0; i < DCTSIZE2; i++) {
313
ifmtbl[i] = (IFAST_MULT_TYPE)
314
DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i],
315
(INT32) aanscales[i]),
316
CONST_BITS-IFAST_SCALE_BITS);
321
#ifdef DCT_FLOAT_SUPPORTED
324
/* For float AA&N IDCT method, multipliers are equal to quantization
325
* coefficients scaled by scalefactor[row]*scalefactor[col], where
327
* scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7
328
* We apply a further scale factor of 1/8.
330
FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table;
332
static const double aanscalefactor[DCTSIZE] = {
333
1.0, 1.387039845, 1.306562965, 1.175875602,
334
1.0, 0.785694958, 0.541196100, 0.275899379
338
for (row = 0; row < DCTSIZE; row++) {
339
for (col = 0; col < DCTSIZE; col++) {
340
fmtbl[i] = (FLOAT_MULT_TYPE)
341
((double) qtbl->quantval[i] *
342
aanscalefactor[row] * aanscalefactor[col] * 0.125);
350
ERREXIT(cinfo, JERR_NOT_COMPILED);
358
* Initialize IDCT manager.
362
jinit_inverse_dct (j_decompress_ptr cinfo)
366
jpeg_component_info *compptr;
369
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
370
SIZEOF(my_idct_controller));
371
cinfo->idct = (struct jpeg_inverse_dct *) idct;
372
idct->pub.start_pass = start_pass;
374
for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
376
/* Allocate and pre-zero a multiplier table for each component */
378
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
379
SIZEOF(multiplier_table));
380
MEMZERO(compptr->dct_table, SIZEOF(multiplier_table));
381
/* Mark multiplier table not yet set up for any method */
382
idct->cur_method[ci] = -1;