2
* drivers/hwmon/lis3lv02d_i2c.c
4
* Implements I2C interface for lis3lv02d (STMicroelectronics) accelerometer.
5
* Driver is based on corresponding SPI driver written by Daniel Mack
6
* (lis3lv02d_spi.c (C) 2009 Daniel Mack <daniel@caiaq.de> ).
8
* Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
10
* Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
12
* This program is free software; you can redistribute it and/or
13
* modify it under the terms of the GNU General Public License
14
* version 2 as published by the Free Software Foundation.
16
* This program is distributed in the hope that it will be useful, but
17
* WITHOUT ANY WARRANTY; without even the implied warranty of
18
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
19
* General Public License for more details.
21
* You should have received a copy of the GNU General Public License
22
* along with this program; if not, write to the Free Software
23
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
27
#include <linux/module.h>
28
#include <linux/kernel.h>
29
#include <linux/init.h>
30
#include <linux/err.h>
31
#include <linux/i2c.h>
32
#include <linux/pm_runtime.h>
33
#include <linux/delay.h>
34
#include "lis3lv02d.h"
36
#define DRV_NAME "lis3lv02d_i2c"
38
static const char reg_vdd[] = "Vdd";
39
static const char reg_vdd_io[] = "Vdd_IO";
41
static int lis3_reg_ctrl(struct lis3lv02d *lis3, bool state)
44
if (state == LIS3_REG_OFF) {
45
ret = regulator_bulk_disable(ARRAY_SIZE(lis3->regulators),
48
ret = regulator_bulk_enable(ARRAY_SIZE(lis3->regulators),
50
/* Chip needs time to wakeup. Not mentioned in datasheet */
51
usleep_range(10000, 20000);
56
static inline s32 lis3_i2c_write(struct lis3lv02d *lis3, int reg, u8 value)
58
struct i2c_client *c = lis3->bus_priv;
59
return i2c_smbus_write_byte_data(c, reg, value);
62
static inline s32 lis3_i2c_read(struct lis3lv02d *lis3, int reg, u8 *v)
64
struct i2c_client *c = lis3->bus_priv;
65
*v = i2c_smbus_read_byte_data(c, reg);
69
static inline s32 lis3_i2c_blockread(struct lis3lv02d *lis3, int reg, int len,
72
struct i2c_client *c = lis3->bus_priv;
73
reg |= (1 << 7); /* 7th bit enables address auto incrementation */
74
return i2c_smbus_read_i2c_block_data(c, reg, len, v);
77
static int lis3_i2c_init(struct lis3lv02d *lis3)
83
lis3_reg_ctrl(lis3, LIS3_REG_ON);
85
lis3->read(lis3, WHO_AM_I, ®);
86
if (reg != lis3->whoami)
87
printk(KERN_ERR "lis3: power on failure\n");
89
/* power up the device */
90
ret = lis3->read(lis3, CTRL_REG1, ®);
94
reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
95
return lis3->write(lis3, CTRL_REG1, reg);
98
/* Default axis mapping but it can be overwritten by platform data */
99
static union axis_conversion lis3lv02d_axis_map =
100
{ .as_array = { LIS3_DEV_X, LIS3_DEV_Y, LIS3_DEV_Z } };
102
static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client,
103
const struct i2c_device_id *id)
106
struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
109
/* Regulator control is optional */
110
if (pdata->driver_features & LIS3_USE_REGULATOR_CTRL)
111
lis3_dev.reg_ctrl = lis3_reg_ctrl;
113
if ((pdata->driver_features & LIS3_USE_BLOCK_READ) &&
114
(i2c_check_functionality(client->adapter,
115
I2C_FUNC_SMBUS_I2C_BLOCK)))
116
lis3_dev.blkread = lis3_i2c_blockread;
119
lis3lv02d_axis_map.x = pdata->axis_x;
122
lis3lv02d_axis_map.y = pdata->axis_y;
125
lis3lv02d_axis_map.z = pdata->axis_z;
127
if (pdata->setup_resources)
128
ret = pdata->setup_resources();
134
if (lis3_dev.reg_ctrl) {
135
lis3_dev.regulators[0].supply = reg_vdd;
136
lis3_dev.regulators[1].supply = reg_vdd_io;
137
ret = regulator_bulk_get(&client->dev,
138
ARRAY_SIZE(lis3_dev.regulators),
139
lis3_dev.regulators);
144
lis3_dev.pdata = pdata;
145
lis3_dev.bus_priv = client;
146
lis3_dev.init = lis3_i2c_init;
147
lis3_dev.read = lis3_i2c_read;
148
lis3_dev.write = lis3_i2c_write;
149
lis3_dev.irq = client->irq;
150
lis3_dev.ac = lis3lv02d_axis_map;
151
lis3_dev.pm_dev = &client->dev;
153
i2c_set_clientdata(client, &lis3_dev);
155
/* Provide power over the init call */
156
if (lis3_dev.reg_ctrl)
157
lis3_reg_ctrl(&lis3_dev, LIS3_REG_ON);
159
ret = lis3lv02d_init_device(&lis3_dev);
161
if (lis3_dev.reg_ctrl)
162
lis3_reg_ctrl(&lis3_dev, LIS3_REG_OFF);
167
if (pdata && pdata->release_resources)
168
pdata->release_resources();
172
static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client)
174
struct lis3lv02d *lis3 = i2c_get_clientdata(client);
175
struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
177
if (pdata && pdata->release_resources)
178
pdata->release_resources();
180
lis3lv02d_joystick_disable();
181
lis3lv02d_remove_fs(&lis3_dev);
183
if (lis3_dev.reg_ctrl)
184
regulator_bulk_free(ARRAY_SIZE(lis3->regulators),
185
lis3_dev.regulators);
189
#ifdef CONFIG_PM_SLEEP
190
static int lis3lv02d_i2c_suspend(struct device *dev)
192
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
193
struct lis3lv02d *lis3 = i2c_get_clientdata(client);
195
if (!lis3->pdata || !lis3->pdata->wakeup_flags)
196
lis3lv02d_poweroff(lis3);
200
static int lis3lv02d_i2c_resume(struct device *dev)
202
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
203
struct lis3lv02d *lis3 = i2c_get_clientdata(client);
206
* pm_runtime documentation says that devices should always
207
* be powered on at resume. Pm_runtime turns them off after system
208
* wide resume is complete.
210
if (!lis3->pdata || !lis3->pdata->wakeup_flags ||
211
pm_runtime_suspended(dev))
212
lis3lv02d_poweron(lis3);
216
#endif /* CONFIG_PM_SLEEP */
218
#ifdef CONFIG_PM_RUNTIME
219
static int lis3_i2c_runtime_suspend(struct device *dev)
221
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
222
struct lis3lv02d *lis3 = i2c_get_clientdata(client);
224
lis3lv02d_poweroff(lis3);
228
static int lis3_i2c_runtime_resume(struct device *dev)
230
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
231
struct lis3lv02d *lis3 = i2c_get_clientdata(client);
233
lis3lv02d_poweron(lis3);
236
#endif /* CONFIG_PM_RUNTIME */
238
static const struct i2c_device_id lis3lv02d_id[] = {
243
MODULE_DEVICE_TABLE(i2c, lis3lv02d_id);
245
static const struct dev_pm_ops lis3_pm_ops = {
246
SET_SYSTEM_SLEEP_PM_OPS(lis3lv02d_i2c_suspend,
247
lis3lv02d_i2c_resume)
248
SET_RUNTIME_PM_OPS(lis3_i2c_runtime_suspend,
249
lis3_i2c_runtime_resume,
253
static struct i2c_driver lis3lv02d_i2c_driver = {
256
.owner = THIS_MODULE,
259
.probe = lis3lv02d_i2c_probe,
260
.remove = __devexit_p(lis3lv02d_i2c_remove),
261
.id_table = lis3lv02d_id,
264
static int __init lis3lv02d_init(void)
266
return i2c_add_driver(&lis3lv02d_i2c_driver);
269
static void __exit lis3lv02d_exit(void)
271
i2c_del_driver(&lis3lv02d_i2c_driver);
274
MODULE_AUTHOR("Nokia Corporation");
275
MODULE_DESCRIPTION("lis3lv02d I2C interface");
276
MODULE_LICENSE("GPL");
278
module_init(lis3lv02d_init);
279
module_exit(lis3lv02d_exit);