3
* Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de
4
* Kyle Harris, Nexus Technologies, Inc., kharris@nexus-tech.net
5
* Marius Groeger, Sysgo Real-Time Solutions GmbH, mgroeger@sysgo.de
7
* See file CREDITS for list of people who contributed to this
10
* This program is free software; you can redistribute it and/or
11
* modify it under the terms of the GNU General Public License as
12
* published by the Free Software Foundation; either version 2 of
13
* the License, or (at your option) any later version.
15
* This program is distributed in the hope that it will be useful,
16
* but WITHOUT ANY WARRANTY; without even the implied warranty of
17
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18
* GNU General Public License for more details.
20
* You should have received a copy of the GNU General Public License
21
* along with this program; if not, write to the Free Software
22
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
28
#include <asm/arch/pxa-regs.h>
30
DECLARE_GLOBAL_DATA_PTR;
32
#ifdef CONFIG_SHOW_BOOT_PROGRESS
33
# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
35
# define SHOW_BOOT_PROGRESS(arg)
39
* misc_init_r: - misc initialisation routines
47
/* determine if the software update key is pressed during startup */
48
/* not ported yet... */
49
if (GPLR0 & 0x00000800) {
50
printf("using bootcmd_normal (sw-update button not pressed)\n");
51
str = getenv("bootcmd_normal");
53
printf("using bootcmd_update (sw-update button pressed)\n");
54
str = getenv("bootcmd_update");
57
setenv("bootcmd",str);
64
* board_init: - setup some data structures
66
* @return: 0 in case of success
71
/* memory and cpu-speed are setup before relocation */
72
/* so we do _nothing_ here */
74
/* arch number of CSB226 board */
75
gd->bd->bi_arch_number = MACH_TYPE_CSB226;
77
/* adress of boot parameters */
78
gd->bd->bi_boot_params = 0xa0000100;
85
* dram_init: - setup dynamic RAM
87
* @return: 0 in case of success
92
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
93
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
100
* csb226_set_led: - switch LEDs on or off
102
* @param led: LED to switch (0,1,2)
103
* @param state: switch on (1) or off (0)
106
void csb226_set_led(int led, int state)
110
case 0: if (state==1) {
111
GPCR0 |= CSB226_USER_LED0;
112
} else if (state==0) {
113
GPSR0 |= CSB226_USER_LED0;
117
case 1: if (state==1) {
118
GPCR0 |= CSB226_USER_LED1;
119
} else if (state==0) {
120
GPSR0 |= CSB226_USER_LED1;
124
case 2: if (state==1) {
125
GPCR0 |= CSB226_USER_LED2;
126
} else if (state==0) {
127
GPSR0 |= CSB226_USER_LED2;
137
* show_boot_progress: - indicate state of the boot process
139
* @param status: Status number - see README for details.
141
* The CSB226 does only have 3 LEDs, so we switch them on at the most
142
* important states (1, 5, 15).
145
void show_boot_progress (int status)
148
case 1: csb226_set_led(0,1); break;
149
case 5: csb226_set_led(1,1); break;
150
case 15: csb226_set_led(2,1); break;
156
#ifdef CONFIG_CMD_NET
157
int board_eth_init(bd_t *bis)
161
rc = cs8900_initialize(0, CONFIG_CS8900_BASE);