2
* (C) Copyright 2003-2005
3
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
6
* Eric Schumann, Phytec Messatechnik GmbH
9
* Jon Smirl <jonsmirl@gmail.com>
12
* Eric Millbrandt, DEKA Research and Development Corporation
14
* See file CREDITS for list of people who contributed to this
17
* This program is free software; you can redistribute it and/or
18
* modify it under the terms of the GNU General Public License as
19
* published by the Free Software Foundation; either version 2 of
20
* the License, or (at your option) any later version.
22
* This program is distributed in the hope that it will be useful,
23
* but WITHOUT ANY WARRANTY; without even the implied warranty of
24
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
25
* GNU General Public License for more details.
27
* You should have received a copy of the GNU General Public License
28
* along with this program; if not, write to the Free Software
29
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
36
#define CONFIG_BOARDINFO "galaxy5200"
39
* High Level Configuration Options
42
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
43
#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
44
#define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */
45
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
46
#define BOOTFLAG_WARM 0x02 /* Software reboot */
49
* Serial console configuration
51
#define CONFIG_PSC_CONSOLE 4 /* console is on PSC4 -> */
52
/* define gps port conf. */
53
/* register later on to */
54
/* enable UART function! */
55
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
56
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
59
* Command line configuration.
61
#include <config_cmd_default.h>
63
#define CONFIG_CMD_DATE
64
#define CONFIG_CMD_DHCP
65
#define CONFIG_CMD_EEPROM
66
#define CONFIG_CMD_I2C
67
#define CONFIG_CMD_JFFS2
68
#define CONFIG_CMD_MII
69
#define CONFIG_CMD_NFS
70
#define CONFIG_CMD_SNTP
71
#define CONFIG_CMD_PING
72
#define CONFIG_CMD_ASKENV
73
#define CONFIG_CMD_USB
74
#define CONFIG_CMD_CACHE
75
#define CONFIG_CMD_FAT
77
#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
79
#if (TEXT_BASE == 0xFE000000) /* Boot low */
80
#define CONFIG_SYS_LOWBOOT 1
82
/* RAMBOOT will be defined automatically in memory section */
84
#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
85
#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:256k(ubootl)," \
86
"1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)"
91
#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */
92
#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow stopping of boot process */
93
/* even with bootdelay=0 */
94
#define CONFIG_BOOT_RETRY_TIME 120 /* Reset if no command is entered */
95
#define CONFIG_RESET_TO_RETRY
97
#define CONFIG_PREBOOT "echo;" \
98
"echo Welcome to U-Boot;"\
101
#define CONFIG_BOOTCOMMAND "go ff300004 0; go ff300004 2 2;" \
102
"bootm ff040000 ff900000 fffc0000"
103
#define CONFIG_BOOTARGS "console=ttyPSC0,115200"
104
#define CONFIG_EXTRA_ENV_SETTINGS "epson=yes\0"
107
* IPB Bus clocking configuration.
109
#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
110
#define CONFIG_SYS_XLB_PIPELINING 1
115
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
116
#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
117
#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
118
#define CONFIG_SYS_I2C_SLAVE 0x7F
119
#define CONFIG_SYS_I2C_INIT_MPC5XXX /* Reset devices on i2c bus */
122
* EEPROM CAT24WC32 configuration
124
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1010100x */
125
#define CONFIG_SYS_I2C_FACT_ADDR 0x52 /* EEPROM CAT24WC32 */
126
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
127
#define CONFIG_SYS_EEPROM_SIZE 4096
128
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
129
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15
135
#define CONFIG_RTC_DS3231 1
136
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
139
* Flash configuration
142
#define CONFIG_SYS_FLASH_BASE 0xfe000000
144
* The flash size is autoconfigured, but cpu/mpc5xxx/cpu_init.c needs this
147
#define CONFIG_SYS_FLASH_SIZE 0x02000000
148
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
150
#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
151
#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
152
#define CONFIG_SYS_FLASH_EMPTY_INFO
153
#define CONFIG_SYS_MAX_FLASH_SECT 259 /* max num of sects on one chip */
154
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
155
/* (= chip selects) */
156
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
159
* Use hardware protection. This seems required, as the BDI uses hardware
160
* protection. Without this, U-Boot can't work with this sectors as its
161
* protection is software only by default.
163
#define CONFIG_SYS_FLASH_PROTECTION 1
166
* Environment settings
169
#define CONFIG_ENV_IS_IN_EEPROM 1
170
#define CONFIG_ENV_OFFSET 0x00 /* environment starts at the */
171
/* beginning of the EEPROM */
172
#define CONFIG_ENV_SIZE CONFIG_SYS_EEPROM_SIZE
174
#define CONFIG_ENV_OVERWRITE 1
177
* SDRAM configuration
180
#define SDRAM_MODE 0x018D0000
181
#define SDRAM_EMODE 0x40090000
182
#define SDRAM_CONTROL 0x71500F00
183
#define SDRAM_CONFIG1 0x73711930
184
#define SDRAM_CONFIG2 0x47770000
189
#define CONFIG_SYS_MBAR 0xF0000000 /* MBAR has to be switched by other */
190
/* bootloader or debugger config */
191
#define CONFIG_SYS_SDRAM_BASE 0x00000000
192
#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
194
/* Use SRAM until RAM will be available */
195
#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
197
/* End of used area in SPRAM */
198
#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE
200
/* Size in bytes reserved for initial data */
201
#define CONFIG_SYS_GBL_DATA_SIZE 128
203
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
204
CONFIG_SYS_GBL_DATA_SIZE)
205
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
207
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
208
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
209
# define CONFIG_SYS_RAMBOOT 1
212
#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
213
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
214
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
216
/* Chip Select configuration for NAND flash */
217
#define CONFIG_SYS_CS1_START 0x20000000
218
#define CONFIG_SYS_CS1_SIZE 0x90000
219
#define CONFIG_SYS_CS1_CFG 0x00025b00
221
/* Chip Select configuration for Epson S1D13513 */
222
#define CONFIG_SYS_CS3_START 0x10000000
223
#define CONFIG_SYS_CS3_SIZE 0x400000
224
#define CONFIG_SYS_CS3_CFG 0xffff3d10
227
* Ethernet configuration
229
#define CONFIG_MPC5xxx_FEC 1
230
#define CONFIG_MPC5xxx_FEC_MII100
231
#define CONFIG_PHY_ADDR 0x01
232
#define CONFIG_NO_AUTOLOAD 1
237
* GPS port configuration
241
* PSC1_0 -> AC97 SDATA out
242
* PSC1_1 -> AC97 SDTA in
243
* PSC1_2 -> AC97 SYNC out
244
* PSC1_3 -> AC97 bitclock out
245
* PSC1_4 -> AC97 reset out
261
* PSC3_0 -> USB_OE OE out
262
* PSC3_1 -> USB_TXN Tx- out
263
* PSC3_2 -> USB_TXP Tx+ out
265
* PSC3_4 -> USB_RXP Rx+ in
266
* PSC3_5 -> USB_RXN Rx- in
267
* PSC3_6 -> USB_PWR PortPower out
268
* PSC3_7 -> USB_SPEED speed out
269
* PSC3_8 -> USB_SUSPEND suspend
270
* PSC3_9 -> USB_OVRCURNT overcurrent in
276
* USB differential mode
282
* Ethernet 100Mbit with MD
293
* ETH_10 -> ETH Collision
299
* ETH_16 -> ETH Rxerr
310
* IrDA/USB 48MHz clock generated internally
313
* ATA chip selects on csb_4/5
314
* CSB_4 -> ATA_CS0 out
315
* CSB_5 -> ATA_CS1 out
318
* PSC3_4 is used as CS6
321
* PSC3_5 is used as CS7
327
* gpio_wkup_7 is GPIO
330
* gpio_wkup_6 is GPIO
333
#define CONFIG_SYS_GPS_PORT_CONFIG 0x0d75a162
336
* Miscellaneous configurable options
338
#define CONFIG_SYS_LONGHELP /* undef to save memory */
339
#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */
341
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
343
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
344
#if defined(CONFIG_CMD_KGDB)
345
#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
348
#if defined(CONFIG_CMD_KGDB)
349
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
351
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
353
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
354
/* Print Buffer Size */
355
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
356
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
358
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
359
#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
361
#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
362
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
364
#define CONFIG_DISPLAY_BOARDINFO 1
366
#define CONFIG_SYS_HUSH_PARSER 1
367
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
369
#define CONFIG_CRC32_VERIFY 1
371
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
373
CONFIG_BOOTP_DNS2 | \
374
CONFIG_BOOTP_SEND_HOSTNAME )
376
#define CONFIG_VERSION_VARIABLE 1
379
* Various low-level settings
381
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
382
#define CONFIG_SYS_HID0_FINAL HID0_ICE
384
/* no burst access on the LPB */
385
#define CONFIG_SYS_CS_BURST 0x00000000
386
/* one deadcycle for the 33MHz statemachine */
387
#define CONFIG_SYS_CS_DEADCYCLE 0x33333331
389
#define CONFIG_SYS_BOOTCS_CFG 0x0002d900
390
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
391
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
393
#define CONFIG_SYS_RESET_ADDRESS 0xff000000
398
#define CONFIG_USB_CLOCK 0x0001bbbb
400
#define CONFIG_PSC3_USB
401
#define CONFIG_USB_CONFIG 0x00000100
402
#define CONFIG_USB_OHCI
403
#define CONFIG_USB_STORAGE
406
* IDE/ATA stuff Supports IDE harddisk
408
#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
409
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
410
#undef CONFIG_IDE_LED /* LED for ide not supported */
412
#define CONFIG_IDE_RESET 1 /* reset for ide supported */
413
#define CONFIG_IDE_PREINIT
414
#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
415
#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
416
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
417
#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
418
/* Offset for data I/O */
419
#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
420
/* Offset for normal register accesses */
421
#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
422
/* Offset for alternate registers */
423
#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)
424
/* Interval between registers */
425
#define CONFIG_SYS_ATA_STRIDE 4
426
#define CONFIG_ATAPI 1
428
/* we enable IDE and FAT support, so we also need partition support */
429
#define CONFIG_DOS_PARTITION 1
432
* Open Firmware flat tree
434
#define CONFIG_OF_LIBFDT 1
435
#define CONFIG_OF_BOARD_SETUP 1
437
#define OF_CPU "PowerPC,5200@0"
438
#define OF_TBCLK CONFIG_SYS_MPC5XXX_CLKIN
439
#define OF_SOC "soc5200@f0000000"
440
#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2600"
442
#endif /* __CONFIG_H */