2
* (C) Copyright 2007-2008
3
* Larry Johnson, lrj@acm.org
5
* based on dtt/lm75.c which is ...
8
* Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net
10
* See file CREDITS for list of people who contributed to this
13
* This program is free software; you can redistribute it and/or
14
* modify it under the terms of the GNU General Public License as
15
* published by the Free Software Foundation; either version 2 of
16
* the License, or (at your option) any later version.
18
* This program is distributed in the hope that it will be useful,
19
* but WITHOUT ANY WARRANTY; without even the implied warranty of
20
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21
* GNU General Public License for more details.
23
* You should have received a copy of the GNU General Public License
24
* along with this program; if not, write to the Free Software
25
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
30
* National Semiconductor LM73 Temperature Sensor
40
#define DTT_I2C_DEV_CODE 0x48 /* National Semi's LM73 device */
41
#define DTT_READ_TEMP 0x0
42
#define DTT_CONFIG 0x1
43
#define DTT_TEMP_HIGH 0x2
44
#define DTT_TEMP_LOW 0x3
45
#define DTT_CONTROL 0x4
48
int dtt_read(int const sensor, int const reg)
54
* Validate 'reg' param and get register size.
71
* Try to read the register at the calculated sensor address.
74
i2c_read(DTT_I2C_DEV_CODE + (sensor & 0x07), reg, 1, data, dlen))
77
* Handle 2 byte result.
80
return (int)((unsigned)data[0] << 8 | (unsigned)data[1]);
85
int dtt_write(int const sensor, int const reg, int const val)
91
* Validate 'reg' param and handle register size
97
data[0] = (uint8_t) val;
102
data[0] = (uint8_t) (val >> 8); /* MSB first */
103
data[1] = (uint8_t) val;
109
* Write value to register at the calculated sensor address.
111
return 0 != i2c_write(DTT_I2C_DEV_CODE + (sensor & 0x07), reg, 1, data,
115
static int _dtt_init(int const sensor)
120
* Validate the Identification register
122
if (0x0190 != dtt_read(sensor, DTT_ID))
125
* Setup THIGH (upper-limit) and TLOW (lower-limit) registers
127
val = CONFIG_SYS_DTT_MAX_TEMP << 7;
128
if (dtt_write(sensor, DTT_TEMP_HIGH, val))
131
val = CONFIG_SYS_DTT_MIN_TEMP << 7;
132
if (dtt_write(sensor, DTT_TEMP_LOW, val))
135
* Setup configuraton register
137
/* config = alert active low, disabled, and reset */
139
if (dtt_write(sensor, DTT_CONFIG, val))
142
* Setup control/status register
144
/* control = temp resolution 0.25C */
146
if (dtt_write(sensor, DTT_CONTROL, val))
149
dtt_read(sensor, DTT_CONTROL); /* clear temperature flags */
156
unsigned char sensors[] = CONFIG_DTT_SENSORS;
157
const char *const header = "DTT: ";
159
for (i = 0; i < sizeof(sensors); i++) {
160
if (0 != _dtt_init(sensors[i]))
161
printf("%s%d FAILED INIT\n", header, i + 1);
163
printf("%s%d is %i C\n", header, i + 1,
164
dtt_get_temp(sensors[i]));
169
int dtt_get_temp(int const sensor)
171
int const ret = dtt_read(sensor, DTT_READ_TEMP);
174
printf("DTT temperature read failed.\n");
177
return (int)((int16_t) ret + 0x0040) >> 7;
178
} /* dtt_get_temp() */