3
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
5
* See file CREDITS for list of people who contributed to this
8
* This program is free software; you can redistribute it and/or
9
* modify it under the terms of the GNU General Public License as
10
* published by the Free Software Foundation; either version 2 of
11
* the License, or (at your option) any later version.
13
* This program is distributed in the hope that it will be useful,
14
* but WITHOUT ANY WARRANTY; without even the implied warranty of
15
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16
* GNU General Public License for more details.
18
* You should have received a copy of the GNU General Public License
19
* along with this program; if not, write to the Free Software
20
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
27
#include <asm/arch/mx31.h>
28
#include <asm/arch/mx31-regs.h>
30
DECLARE_GLOBAL_DATA_PTR;
34
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
35
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
42
__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
43
__REG(CSCR_L(0)) = 0xa0330d01;
44
__REG(CSCR_A(0)) = 0x00220800;
46
__REG(CSCR_U(4)) = 0x0000dcf6; /* CS4: Network Controller */
47
__REG(CSCR_L(4)) = 0x444a4541;
48
__REG(CSCR_A(4)) = 0x44443302;
50
/* setup pins for UART1 */
51
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
52
mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
53
mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
54
mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
57
mx31_gpio_mux(MUX_CSPI2_SS2__CSPI2_SS2_B);
58
mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK);
59
mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B);
60
mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI);
61
mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO);
62
mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B);
63
mx31_gpio_mux(MUX_CSPI2_SS1__CSPI2_SS1_B);
65
/* start SPI2 clock */
66
__REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4);
68
gd->bd->bi_arch_number = MACH_TYPE_MX31LITE; /* board id for linux */
69
gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */
76
printf("Board: i.MX31 Litekit\n");
80
int board_eth_init(bd_t *bis)
84
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);