1
/* Configuration header file for LEON3 GRSIM, trying to be similar
2
* to Gaisler's GR-XC3S-1500 board.
4
* (C) Copyright 2003-2005
5
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
8
* Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
10
* See file CREDITS for list of people who contributed to this
13
* This program is free software; you can redistribute it and/or
14
* modify it under the terms of the GNU General Public License as
15
* published by the Free Software Foundation; either version 2 of
16
* the License, or (at your option) any later version.
18
* This program is distributed in the hope that it will be useful,
19
* but WITHOUT ANY WARRANTY; without even the implied warranty of
20
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21
* GNU General Public License for more details.
23
* You should have received a copy of the GNU General Public License
24
* along with this program; if not, write to the Free Software
25
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
33
* High Level Configuration Options
36
* Select between TSIM or GRSIM by setting CONFIG_GRSIM or CONFIG_TSIM to 1.
39
* tsim-leon3 -sdram 0 -ram 32000 -rom 8192 -mmu
43
#define CONFIG_LEON3 /* This is an LEON3 CPU */
44
#define CONFIG_LEON 1 /* This is an LEON CPU */
45
#define CONFIG_GRSIM 0 /* ... not running on GRSIM */
46
#define CONFIG_TSIM 1 /* ... running on TSIM */
48
/* CPU / AMBA BUS configuration */
49
#define CONFIG_SYS_CLK_FREQ 40000000 /* 40MHz */
51
/* Number of SPARC register windows */
52
#define CONFIG_SYS_SPARC_NWINDOWS 8
55
* Serial console configuration
57
#define CONFIG_BAUDRATE 38400 /* ... at 38400 bps */
58
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
61
#define CONFIG_DOS_PARTITION
62
#define CONFIG_MAC_PARTITION
63
#define CONFIG_ISO_PARTITION
68
#define CONFIG_CMD_AMBAPP /* AMBA Plyg&Play information */
69
#define CONFIG_CMD_BDI /* bdinfo */
70
#define CONFIG_CMD_CONSOLE /* coninfo */
71
#define CONFIG_CMD_DIAG
72
#define CONFIG_CMD_ECHO /* echo arguments */
73
#define CONFIG_CMD_FPGA /* FPGA configuration Support */
74
#define CONFIG_CMD_IRQ
75
#define CONFIG_CMD_ITEST /* Integer (and string) test */
76
#define CONFIG_CMD_LOADB /* loadb */
77
#define CONFIG_CMD_LOADS /* loads */
78
#define CONFIG_CMD_MISC /* Misc functions like sleep etc */
79
#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
80
#define CONFIG_CMD_REGINFO
81
#define CONFIG_CMD_RUN /* run command in env variable */
82
#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
83
#define CONFIG_CMD_SOURCE /* "source" command support */
84
#define CONFIG_CMD_XIMG /* Load part of Multi Image */
89
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
91
#define CONFIG_PREBOOT "echo;" \
92
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
95
#undef CONFIG_BOOTARGS
96
/*#define CONFIG_SYS_HUSH_PARSER 0*/
97
#ifdef CONFIG_SYS_HUSH_PARSER
98
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
101
#define CONFIG_EXTRA_ENV_SETTINGS \
103
"nfsargs=setenv bootargs root=/dev/nfs rw " \
104
"nfsroot=${serverip}:${rootpath}\0" \
105
"ramargs=setenv bootargs root=/dev/ram rw\0" \
106
"addip=setenv bootargs ${bootargs} " \
107
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
108
":${hostname}:${netdev}:off panic=1\0" \
109
"flash_nfs=run nfsargs addip;" \
110
"bootm ${kernel_addr}\0" \
111
"flash_self=run ramargs addip;" \
112
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
113
"net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0" \
114
"rootpath=/export/roofs\0" \
115
"scratch=40000000\0" \
116
"getkernel=tftpboot \$\(scratch\)\ \$\(bootfile\)\0" \
117
"ethaddr=00:00:7A:CC:00:12\0" \
118
"bootargs=console=ttyS0,38400" \
120
#define CONFIG_NETMASK 255.255.255.0
121
#define CONFIG_GATEWAYIP 192.168.0.1
122
#define CONFIG_SERVERIP 192.168.0.81
123
#define CONFIG_IPADDR 192.168.0.80
124
#define CONFIG_ROOTPATH /export/rootfs
125
#define CONFIG_HOSTNAME grxc3s1500
126
#define CONFIG_BOOTFILE /uImage
128
#define CONFIG_BOOTCOMMAND "run flash_self"
133
* |--------------------------------|
134
* | 0x00000000 Text & Data & BSS | *
136
* | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
137
* | UNUSED / Growth | * 256kb
138
* |--------------------------------|
139
* | 0x00050000 Base custom area | *
141
* | | * Rest of Flash
142
* |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
143
* | END-0x00008000 Environment | * 32kb
144
* |--------------------------------|
149
* |--------------------------------|
150
* | UNUSED / scratch area |
155
* |--------------------------------|
156
* | Monitor .Text / .DATA / .BSS | * 256kb
158
* |--------------------------------|
159
* | Monitor Malloc | * 128kb (contains relocated environment)
160
* |--------------------------------|
161
* | Monitor/kernel STACK | * 64kb
162
* |--------------------------------|
163
* | Page Table for MMU systems | * 2k
164
* |--------------------------------|
165
* | PROM Code accessed from Linux | * 6kb-128b
166
* |--------------------------------|
167
* | Global data (avail from kernel)| * 128b
168
* |--------------------------------|
173
* Flash configuration (8,16 or 32 MB)
174
* TEXT base always at 0xFFF00000
175
* ENV_ADDR always at 0xFFF40000
176
* FLASH_BASE at 0xFC000000 for 64 MB
177
* 0xFE000000 for 32 MB
178
* 0xFF000000 for 16 MB
179
* 0xFF800000 for 8 MB
181
#define CONFIG_SYS_NO_FLASH 1
182
#define CONFIG_SYS_FLASH_BASE 0x00000000
183
#define CONFIG_SYS_FLASH_SIZE 0x00800000
184
#define CONFIG_ENV_SIZE 0x8000
186
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SIZE)
188
#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors */
189
#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max num of sects on one chip */
190
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
192
#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
193
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
194
#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
195
#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
197
#ifdef ENABLE_FLASH_SUPPORT
198
/* For use with grsim FLASH emulation extension */
199
#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
201
#undef CONFIG_FLASH_8BIT /* Flash is 32-bit */
204
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
205
#define CONFIG_FLASH_CFI_DRIVER
206
#define CONFIG_SYS_FLASH_CFI
210
* Environment settings
212
#define CONFIG_ENV_IS_NOWHERE 1
213
/*#define CONFIG_ENV_IS_IN_FLASH*/
214
/*#define CONFIG_ENV_SIZE 0x8000*/
215
#define CONFIG_ENV_SECT_SIZE 0x40000
216
#define CONFIG_ENV_OVERWRITE 1
221
#define CONFIG_SYS_SDRAM_BASE 0x40000000
222
#define CONFIG_SYS_SDRAM_SIZE 0x02000000
223
#define CONFIG_SYS_SDRAM_END (CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE)
225
/* no SRAM available */
226
#undef CONFIG_SYS_SRAM_BASE
227
#undef CONFIG_SYS_SRAM_SIZE
229
/* Always Run U-Boot from SDRAM */
230
#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
231
#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
232
#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
234
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
235
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
237
#define CONFIG_SYS_PROM_SIZE (8192-CONFIG_SYS_GBL_DATA_SIZE)
238
#define CONFIG_SYS_PROM_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
240
#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_PROM_OFFSET-32)
241
#define CONFIG_SYS_STACK_SIZE (0x10000-32)
243
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
244
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
245
# define CONFIG_SYS_RAMBOOT 1
248
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
249
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
250
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
252
#define CONFIG_SYS_MALLOC_END (CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
253
#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
255
/* relocated monitor area */
256
#define CONFIG_SYS_RELOC_MONITOR_MAX_END CONFIG_SYS_MALLOC_BASE
257
#define CONFIG_SYS_RELOC_MONITOR_BASE (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
259
/* make un relocated address from relocated address */
260
#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE))
263
* Ethernet configuration
265
#define CONFIG_GRETH 1
266
#define CONFIG_NET_MULTI 1
268
/* Default HARDWARE address */
269
#define GRETH_HWADDR_0 0x00
270
#define GRETH_HWADDR_1 0x00
271
#define GRETH_HWADDR_2 0x7A
272
#define GRETH_HWADDR_3 0xcc
273
#define GRETH_HWADDR_4 0x00
274
#define GRETH_HWADDR_5 0x12
276
#define CONFIG_ETHADDR 00:00:7a:cc:00:12
279
* Define CONFIG_GRETH_10MBIT to force GRETH at 10Mb/s
281
/* #define CONFIG_GRETH_10MBIT 1 */
282
#define CONFIG_PHY_ADDR 0x00
285
* Miscellaneous configurable options
287
#define CONFIG_SYS_LONGHELP /* undef to save memory */
288
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
289
#if defined(CONFIG_CMD_KGDB)
290
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
292
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
294
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
295
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
296
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
298
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
299
#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
301
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
303
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
305
/***** Gaisler GRLIB IP-Cores Config ********/
307
/* AMBA Plug & Play info display on startup */
308
/*#define CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP*/
310
#define CONFIG_SYS_GRLIB_SDRAM 0
311
#define CONFIG_SYS_GRLIB_MEMCFG1 (0x000000ff | (1<<11))
313
/* GRSIM configuration */
314
#define CONFIG_SYS_GRLIB_MEMCFG2 0x82206000
316
/* TSIM configuration */
317
#define CONFIG_SYS_GRLIB_MEMCFG2 0x00001820
319
#define CONFIG_SYS_GRLIB_MEMCFG3 0x00136000
321
#define CONFIG_SYS_GRLIB_FT_MEMCFG1 (0x000000ff | (1<<11))
322
#define CONFIG_SYS_GRLIB_FT_MEMCFG2 0x82206000
323
#define CONFIG_SYS_GRLIB_FT_MEMCFG3 0x00136000
325
/* no DDR controller */
326
#define CONFIG_SYS_GRLIB_DDR_CFG 0x00000000
328
/* no DDR2 Controller */
329
#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
330
#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
332
#define CONFIG_SYS_GRLIB_APBUART_SCALER \
333
((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
335
/* default kernel command line */
336
#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
338
#define CONFIG_IDENT_STRING "Gaisler GRSIM"
340
#endif /* __CONFIG_H */