2
* (C) Copyright 2007-2008
3
* Stelian Pop <stelian.pop@leadtechdesign.com>
4
* Lead Tech Design <www.leadtechdesign.com>
6
* Configuation settings for the AT91SAM9RLEK board.
8
* See file CREDITS for list of people who contributed to this
11
* This program is free software; you can redistribute it and/or
12
* modify it under the terms of the GNU General Public License as
13
* published by the Free Software Foundation; either version 2 of
14
* the License, or (at your option) any later version.
16
* This program is distributed in the hope that it will be useful,
17
* but WITHOUT ANY WARRANTY; without even the implied warranty of
18
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19
* GNU General Public License for more details.
21
* You should have received a copy of the GNU General Public License
22
* along with this program; if not, write to the Free Software
23
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
30
#define CONFIG_AT91_LEGACY
32
/* ARM asynchronous clock */
33
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
34
#define CONFIG_SYS_HZ 1000
36
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
37
#define CONFIG_AT91SAM9RL 1 /* It's an Atmel AT91SAM9RL SoC*/
38
#define CONFIG_AT91SAM9RLEK 1 /* on an AT91SAM9RLEK Board */
39
#define CONFIG_ARCH_CPU_INIT
40
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
42
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
43
#define CONFIG_SETUP_MEMORY_TAGS 1
44
#define CONFIG_INITRD_TAG 1
46
#define CONFIG_SKIP_LOWLEVEL_INIT
47
#define CONFIG_SKIP_RELOCATE_UBOOT
52
#define CONFIG_AT91_GPIO 1
53
#define CONFIG_ATMEL_USART 1
57
#define CONFIG_USART3 1 /* USART 3 is DBGU */
61
#define LCD_BPP LCD_COLOR8
62
#define CONFIG_LCD_LOGO 1
63
#undef LCD_TEST_PATTERN
64
#define CONFIG_LCD_INFO 1
65
#define CONFIG_LCD_INFO_BELOW_LOGO 1
66
#define CONFIG_SYS_WHITE_ON_BLACK 1
67
#define CONFIG_ATMEL_LCD 1
68
#define CONFIG_ATMEL_LCD_RGB565 1
69
#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
72
#define CONFIG_AT91_LED
73
#define CONFIG_RED_LED AT91_PIN_PD14 /* this is the power led */
74
#define CONFIG_GREEN_LED AT91_PIN_PD15 /* this is the user1 led */
75
#define CONFIG_YELLOW_LED AT91_PIN_PD16 /* this is the user2 led */
77
#define CONFIG_BOOTDELAY 3
80
* Command line configuration.
82
#include <config_cmd_default.h>
84
#undef CONFIG_CMD_FPGA
86
#undef CONFIG_CMD_IMLS
87
#undef CONFIG_CMD_LOADS
89
#undef CONFIG_CMD_SOURCE
92
#define CONFIG_CMD_NAND 1
95
#define CONFIG_NR_DRAM_BANKS 1
96
#define PHYS_SDRAM 0x20000000
97
#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
100
#define CONFIG_ATMEL_DATAFLASH_SPI
101
#define CONFIG_HAS_DATAFLASH 1
102
#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
103
#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
104
#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
105
#define AT91_SPI_CLK 15000000
106
#define DATAFLASH_TCSS (0x1a << 16)
107
#define DATAFLASH_TCHS (0x1 << 24)
109
/* NOR flash - not present */
110
#define CONFIG_SYS_NO_FLASH 1
113
#ifdef CONFIG_CMD_NAND
114
#define CONFIG_NAND_ATMEL
115
#define CONFIG_SYS_MAX_NAND_DEVICE 1
116
#define CONFIG_SYS_NAND_BASE 0x40000000
117
#define CONFIG_SYS_NAND_DBW_8 1
118
/* our ALE is AD21 */
119
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
120
/* our CLE is AD22 */
121
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
122
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PB6
123
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD17
127
/* Ethernet - not present */
129
/* USB - not supported */
131
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
133
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
134
#define CONFIG_SYS_MEMTEST_END 0x23e00000
136
#ifdef CONFIG_SYS_USE_DATAFLASH
138
/* bootstrap + u-boot + env + linux in dataflash on CS0 */
139
#define CONFIG_ENV_IS_IN_DATAFLASH 1
140
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
141
#define CONFIG_ENV_OFFSET 0x4200
142
#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
143
#define CONFIG_ENV_SIZE 0x4200
144
#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
145
#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
146
"root=/dev/mtdblock0 " \
147
"mtdparts=atmel_nand:-(root) "\
148
"rw rootfstype=jffs2"
150
#else /* CONFIG_SYS_USE_NANDFLASH */
152
/* bootstrap + u-boot + env + linux in nandflash */
153
#define CONFIG_ENV_IS_IN_NAND 1
154
#define CONFIG_ENV_OFFSET 0x60000
155
#define CONFIG_ENV_OFFSET_REDUND 0x80000
156
#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
157
#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
158
#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
159
"root=/dev/mtdblock5 " \
160
"mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
161
"rw rootfstype=jffs2"
165
#define CONFIG_BAUDRATE 115200
166
#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
168
#define CONFIG_SYS_PROMPT "U-Boot> "
169
#define CONFIG_SYS_CBSIZE 256
170
#define CONFIG_SYS_MAXARGS 16
171
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
172
#define CONFIG_SYS_LONGHELP 1
173
#define CONFIG_CMDLINE_EDITING 1
176
* Size of malloc() pool
178
#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
179
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
181
#define CONFIG_STACKSIZE (32*1024) /* regular stack */
183
#ifdef CONFIG_USE_IRQ
184
#error CONFIG_USE_IRQ not supported