2
* Copyright 2008 Freescale Semiconductor, Inc.
4
* This program is free software; you can redistribute it and/or
5
* modify it under the terms of the GNU General Public License
6
* Version 2 as published by the Free Software Foundation.
12
#include <asm/fsl_ddr_sdram.h>
13
#include <asm/fsl_ddr_dimm_params.h>
16
get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
18
i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t));
20
/* We use soldered memory, but use an SPD EEPROM to describe it.
21
* The SPD has an unspecified dimm type, but the DDR2 initialization
22
* code requires a specific type to be specified. This sets the type
23
* as a standard unregistered SO-DIMM. */
24
if (spd->dimm_type == 0) {
26
((uchar *)spd)[63] += 0x4;
30
unsigned int fsl_ddr_get_mem_data_rate(void)
32
return get_ddr_freq(0);
35
void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
36
unsigned int ctrl_num)
41
printf("%s: invalid ctrl_num = %d\n", __func__, ctrl_num);
45
for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++)
46
get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS);
49
void fsl_ddr_board_options(memctl_options_t *popts,
51
unsigned int ctrl_num)
54
* Factors to consider for clock adjust:
55
* - number of chips on bus
60
* This needs to be determined on a board-by-board basis.
64
popts->clk_adjust = 7;
67
* Factors to consider for CPO:
71
popts->cpo_override = 9;
74
* Factors to consider for write data delay:
84
popts->write_data_delay = 3;
87
* Factors to consider for half-strength driver enable:
88
* - number of DIMMs installed
90
popts->half_strength_driver_enable = 0;